Fully removes a package from the hash. Also unify prototype with
removal from an alpm_list_t, fixing issues when removing a package
from the pkgcache.
Signed-off-by: Allan McRae <allan@archlinux.org>
While probably still not optimal in terms of everyday usage in
pacman, this reduces the absolute size increase to "more reasonable"
levels. For databases greater than 5000 in size, the minimum size
increase is used which is still on the order of a 10% increase.
Signed-off-by: Allan McRae <allan@archlinux.org>
Check that the requested size of a pkghash is not beyond the maximum
prime. Also check for successful creation of a new hash before
rehashing.
Signed-off-by: Allan McRae <allan@archlinux.org>
Since the sync database never changes size once we initialize it, we
allow it to be filled a bit more. This reduces the overall memory
footprint needed by the hash table.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to get through the rehash required by smoke001 and pass
all pactests. It is by no means the best or most efficient
implementation but it does do the job.
Signed-off-by: Dan McGee <dan@archlinux.org>
Read the package information for sync/local databases into a pmpkghash_t
structure.
Provide a alpm_db_get_pkgcache_list() method that returns the list from
the hash object. Most usages of alpm_db_get_pkgcache are converted to
this at this stage for ease of implementation. Review whether these are
better accessing the hash table directly at a later stage.
Signed-off-by: Allan McRae <allan@archlinux.org>
This works for both local and sync databases in slightly different ways. For
the local database, we can use the directory hard link count on the local/
folder. For sync databases, we use the archive size coupled with some
computed average per-package sizes to determine an estimate.
This is currently a dead assignment once calculated, but could be used to
set the initial size of a hash table.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Noted in FS#22697. When I factored out _alpm_parsedate() into a common
function, I didn't move the <locale.h> include properly, causing a build
failure when NLS is disabled and this header isn't automatically included
everywhere.
Signed-off-by: Dan McGee <dan@archlinux.org>
This flag allows to disable version checking in dependency resolving
code.
depcmp_tolerant respects the NODEPVERSION flag but we still keep the
original strict depcmp. The idea is to reduce the impact of the
NODEPVERSION flag by using it in fewer places.
I replaced almost all depcmp calls by depcmp_tolerant in deps.c (except
in the public find_satisfier used by deptest / pacman -T), but I kept
depcmp in sync.c and conflict.c
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
It's likely that these interfaces will break sooner or later, now that
pacman no longer uses them.
So better force the two people who use them to migrate their code to the
new add_pkg/remove_pkg interface, which is very easy anyway.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Old interface is marked as deprecated:
int alpm_sync_target(char *target);
int alpm_sync_dbtarget(char *db, char *target);
int alpm_add_target(char *target);
int alpm_remove_target(char *target);
New recommended interface:
int alpm_add_pkg(pmpkg_t *pkg);
int alpm_remove_pkg(pmpkg_t *pkg);
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
For consistency with alpm_add_pkg.
The new recommended interface is alpm_add_pkg / alpm_remove_pkg, all
others interfaces are deprecated.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
This group function is meant to help group handling from frontend : it
scans all dbs, handling ignored packages and duplicate members (the
first repo where a member is found has the priority).
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
This new function is meant to deprecate all existing
sync/add target functions :
int alpm_sync_target(char *target);
int alpm_sync_dbtarget(char *db, char *target);
int alpm_add_target(char *target);
Rather than dropping these 3 interfaces, it might be better to rewrite
them using alpm_add_pkg for now.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
This is a public interface for resolvedep. It looks nicer to expose it
this way rather than through sync_target.
This function can also be helpful for external tools as it should give
good results close to how pacman select a package for satisfying a given
dep.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
If there are multiple providers in one db, pacman used to just stop at
the first one (both during dependency resolution or for pacman -S
'provision' which uses the same code).
This adds a new conversation callback so that the user can choose which
provider to install. By default (user press enter or --noconfirm), the
first provider is still chosen, so for example the behavior of sync402
and 403 is preserved. But at least the user now has the possibility to
make the right choice in a manual run.
If one of the provider is already installed, it is picked for
reinstall/upgrade, so that provision 002/003 pactest now pass.
$ pacman -S community/smtp-server
:: There are 3 providers available for smtp-server:
1) courier-mta 2) esmtp 3) exim
Which one do you want to install?
Enter a number (default=1):
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Perform the cheap struct and string setup of the local DB at handle
initialization time to match the teardown we do when releasing the handle.
If the local DB is not needed, all real initialization is done lazily after
DB paths and other things have been configured anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
We explicitly place 'pkgbase' (and used to place 'force') fields inside
PKGINFO files, so ignore them silently instead of printing an error for
them. Also make the error message for unknown keys actually contain the key.
Signed-off-by: Dan McGee <dan@archlinux.org>
We were returning a package error code rather than a DB one, and we
would leak the archive memory if the database file didn't exist.
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead, go the same route we have always taken with version-release in
libalpm and treat it all as one piece of information. Makepkg is the only
script that knows about epoch as a distinct value; from there on out we will
parse out the components as necessary.
This makes the code a lot simpler as far as epoch handling goes. The
downside here is that we are tossing some compatibility to the wind;
packages using force will have to be rebuilt with an incremented epoch to
keep their special status.
Signed-off-by: Dan McGee <dan@archlinux.org>
Adapting from RPM, follow the [epoch:]version[-release] syntax. We can also
borrow some of their parsing code for our purposes (thanks!). Add some new
tests to our vercmp shell script tester for epoch comparisons, and then make
the code work with these newfangled epoch specifiers.
Signed-off-by: Dan McGee <dan@archlinux.org>
Since it is the same string. Done with some bash looping and sed magic.
for src in po/*.po; do
echo $src
newtrans=$(grep -A1 "msgid.*$1" $src | tail -n1)
newtrans=${newtrans//\\/\\\\}
echo "$newtrans"
fname=${src##*/}
dest=lib/libalpm/po/$fname
sed -i -e "/msgid.*$1/{N; s/msgstr.*$/$newtrans/}" $dest
done
Signed-off-by: Dan McGee <dan@archlinux.org>
In most (all?) cases, we will process all files for a given sync database
entry sequentially. The code currently does an _alpm_pkg_find() for every
file in the database, but we had the "current" package readily available.
Shift some local variables around a bit to expose this to sync_db_read() and
use it if the package is the correct one.
On my system, this cuts calls to _alpm_pkg_find() from 20,769 to 10,349
calls during a -Qu operation, and results in a ~30% speedup of the same
operation (0.35 sec -> 0.27 sec). This benefit should be apparent anywhere
we read in the full contents of the sync databases.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't need to create a temporary copy of the string if we are smart with
our pointer manipulation and string copying. This saves a bunch of string
duplication during database parsing, both local and sync.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove the need for an unconditional string duplication by using pointer
arithmetic instead, and strndup() instead of an unspecified-length strdup().
This should reduce memory churn a fair amount as this is called pretty
frequently during database loads.
Signed-off-by: Dan McGee <dan@archlinux.org>
When installing packages from a file, the integrity check count
stays at (0/x) complete. This ensures it is bumped to (x/x) at
the end of the process.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is essentially a backport/cherry-pick of commit 33240e87b9 from
master, but has to be done by hand because the DB format has diverged. Read
more in the commit message used there, which follows.
Due to the way we funk around with package data loading, we had a condition
where the filelist got doubled up because it was loaded twice.
Packages are originally loaded with INFRQ_BASE. In an upgrade/sync, the
package is checked for file conflicts next, leaving us in an "INFRQ_BASE |
INFRQ_FILES" state. Later, when committing a single package, we have an
explicit call to _alpm_local_db_read() with INFRQ_ALL as the level. Because
the package's level did not match this, we skipped over our previous "does
the incoming level match where I'm at" shortcut, and continued to load
things again, because of a lack of fine-grained checking for each of DESC,
FILES, and INSTALL.
The end result is we loaded the filelist twice, causing our remove logic to
iterate twice over the installed files, spewing a bunch of "cannot find file
X" messages.
Fix the problem by doing a bit more bitmasking logic throughout the load
method, and also fix the sanity check at the beginning of the function- this
should *only* be used for local packages as opposed to the "not a package"
check that was there before.
Signed-off-by: Dan McGee <dan@archlinux.org>
After all the debate as to what to do on maint, we are going to end up just
incorporating epoch into the version string, so we don't need this separate
field at all. Revert commit 5c8083baa4 and also kill the force flag we were
recording here as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
Due to the way we funk around with package data loading, we had a condition
where the filelist got doubled up because it was loaded twice.
Packages are originally loaded with INFRQ_BASE. In an upgrade/sync, the
package is checked for file conflicts next, leaving us in an "INFRQ_BASE |
INFRQ_FILES" state. Later, when committing a single package, we have an
explicit call to _alpm_local_db_read() with INFRQ_ALL as the level. Because
the package's level did not match this, we skipped over our previous "does
the incoming level match where I'm at" shortcut, and continued to load
things again, because of a lack of fine-grained checking for each of DESC,
FILES, and INSTALL.
The end result is we loaded the filelist twice, causing our remove logic to
iterate twice over the installed files, spewing a bunch of "cannot find file
X" messages.
Fix the problem by doing a bit more bitmasking logic throughout the load
method, and also fix the sanity check at the beginning of the function- this
should *only* be used for local packages as opposed to the "not a package"
check that was there before.
A debug log message was added to upgraderemove as well to match the one
already in the normal remove codepath.
Signed-off-by: Dan McGee <dan@archlinux.org>
libarchive eventually calls it anyway, but backtraces make a lot more sense
if we call it, as well as matching our precedent from alpm_pkg_load().
Signed-off-by: Dan McGee <dan@archlinux.org>
This is helpful anyway to the user, and should also be helpful to us if we
see problems cropping up in the check during development.
Also add a missing ->used = 0 initialization in the code path less taken.
Signed-off-by: Dan McGee <dan@archlinux.org>
Although they won't be the same in the gettext catalog because of the '\n'
we should still use the same text.
Signed-off-by: Dan McGee <dan@archlinux.org>
This can take a while too, and it is really easy to add the necessary
callback stuff for adding a progressbar.
Signed-off-by: Dan McGee <dan@archlinux.org>
These were just two small things I came across today and found could be
fixed or helpful, so I've added them and I'm not sure what else to bundle
them with. commit_count++
Signed-off-by: Dan McGee <dan@archlinux.org>
We were checking if a package existed locally, but then using the
incoming package to calculate removed size rather than the currently
installed package.
Also adjust the local variable in the replaces loop to make it more
clear that we are always dealing with local packages here.
Signed-off-by: Dan McGee <dan@archlinux.org>
All of these can be done with integer division; the only slightly
interesting part is ensuring we round up like before with calling the
ceil() function.
We can also remove the math library from requirements; now that the only
ceil() calls are gone, we don't need this anymore.
Signed-off-by: Dan McGee <dan@archlinux.org>
file_pkg_ops can be a static struct like in other backends, we just need
to initialize it at some point.
Dan: add initialization flag.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
None of these warn at the normal "-Wall -Werror" level, but casts do occur
that we are fine with. Make them explicit to silence some warnings when
using "-Wconversion".
Signed-off-by: Dan McGee <dan@archlinux.org>
There is a lot of swtiching between size_t and int for alpm_list sizes
in the codebase. Start converting these to all be size_t by adjusting
the return type of alpm_list_count and fixing all additional warnings
given by -Wconversion that are generated by this change.
Dan: a few more small changes to ensure things compile, adjusting some
printf format string characters to accommodate the larger size on x86_64.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
All functions that are limited to the local translation unit are
declared static. This exposed that the _pkg_get_deltas declaration
in be_local.c was being satified by the function in packages.c which
when declared static caused linker failures.
Fixes all warnings with -Wmissing-{declarations,prototypes}.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We use PATH_MAX everywhere by including limits.h so there is no
point in doing a check for it in a different header when dealing
with FreeBSD's libfetch.
Also, remove autoconf check for strings.h header as it is not used
anywhere.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
POSIX does not require PATH_MAX be defined when there is not actual
limit to its value. This affects HURD based systems. Work around
this by defining PATH_MAX to 4096 (as on Linux) when this is not
defined.
Also, clean up inclusions of limits.h and remove autoconf check for
this header as we do not use macro shields for its inclusion anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Just like we did for package name comparsions, if we add a depend name_hash
field on depend struct initialization, we can use it instead of doing a
string name comparison, saving us a lot of checks in the depcmp code.
Signed-off-by: Dan McGee <dan@archlinux.org>
Noticed when tweaking testdb, when we run _alpm_depcmp in loops and call it
seven million times, the strdup()/free() combo can add up. Remove the need
for any string duplication by some pointer manipulation and use of strncmp
instead of strcmp. Also kill the function logger and add an escape so we
don't needlessly retrieve the list of provides.
Signed-off-by: Dan McGee <dan@archlinux.org>
The old function was written in a time before we relied on it for nearly
every operation. Since then, we have switched to the archive backend and now
fast parsing is a big deal.
The former function made a per-character call to the libarchive
archive_read_data() function, which resulted in some 21 million calls in a
typical "load all sync dbs" operation. If we instead do some buffering of
our own and read the blocks directly, and then find our newlines from there,
we can cut out the multiple layers of overhead and go from archive to parsed
data much quicker.
Both users of the former function are switched over to the new signature,
made easier by the macros now in place in the sync backend parsing code.
Performance: for a `pacman -Su` (no upgrades available),
_alpm_archive_fgets() goes from being 29% of the total time to 12% The time
spent on the libarchive function being called dropped from 24% to 6%.
This pushes _alpm_pkg_find back to the title of slowest low-level function.
Signed-off-by: Dan McGee <dan@archlinux.org>
The amount of diskspace needed for a transaction can be less than
zero. Only test this against the available disk space if it is
positive, which avoids a comparison being made between signed and
unsigned types (-Wsign-compare).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Always declare a function with (void) rather than () when we expect
no arguements. Fixes all warnings with -Wstrict-prototypes.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This simplifies a lot of the repetative code and makes it obvious where the
tricky or different ones are (e.g. depends, dates). It also makes it
significantly easier to change the way this code works in the future.
There should be no functional change with this patch.
Signed-off-by: Dan McGee <dan@archlinux.org>
Saves a few bytes due to padding (256 -> 248 bytes), especially on x86_64,
so we get the overhead of our new hash field right back.
Signed-off-by: Dan McGee <dan@archlinux.org>
This results in huge gains to a lot of our codepaths since this is the most
frequent method of random access to packages in a list. The gains are seen
in both profiling and real life.
$ pacman -Sii zvbi
real: 0.41 sec -> 0.32 sec
strcmp: 16,669,760 calls -> 473,942 calls
_alpm_pkg_find: 52.73% -> 26.31% of time
$ pacman -Su (no upgrades found)
real: 0.40 sec -> 0.50 sec
strcmp: 19,497,226 calls -> 524,097 calls
_alpm_pkg_find: 52.36% -> 26.15% of time
There is some minor risk with this patch, but most of it should be avoided
by falling back to strcmp() if we encounter a package with a '0' hash value
(which we should not via any existing code path). We also do a strcmp once
hash values match to ensure against hash collisions. The risk left is that a
package name is modified once it was originally set, but the hash value is
left alone. That would probably result in a lot of other problems anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is prepping for the addition of a hash field to each package to greatly
speed up the string comparisons we frequently do on package name in
_alpm_pkg_find.
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than error out, this is easy enough. Looks quite similar to the code
in be_local for creating the local directory.
Signed-off-by: Dan McGee <dan@archlinux.org>
Whenever depends is needed from the local db, so is desc. The only
disadvantage to merging them is the additional time taken to read the
depends entries when they are not needed. As depends is in general
relatively small, the additional time taken to read it in will be
negligable. Also, merging these files will speed up local database
access due to less file seeks.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This should hopefully address some of the concerns raised in FS#11639 with
regards to continuing after filling the disk up.
Add some more checks and passing of error conditions between our functions.
When a libarchive warning is encountered, check if it is due to lack of disk
space and if so upgrade it to an error condition. A review of other
libarchive warnings suggests that these are less critical and can remain as
informative warning messages at this stage.
Note the presence of errors after extraction of an entire package is complete.
If so, we abort the transaction to be on the safe side and keep damage to a
minimum.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: make ENOSPC warning into an error]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than hiding these warnings, show them to the user as they happen.
This will prevent things such as hiding full filesystem errors (ENOSPC) from
the user as seen in FS#11639.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: adjust warning wording and add gettext calls]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Whether it be "desc", "depends", or "deltas", it really doesn't matter-
treat them all the same and have the ability to read any data from any file
in that list. This continues the work in a44c7b8956.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Use our normal return() function syntax
* Rework a few things to reduce number of casts
* Fix void function argument declaration
* Add missing gettext _() call
* Remove need for seperate malloc() of statvfs/statfs structure
* Unify argument order of static functions- mountpoints now always
passed first
* Count all files that start with '.' in a package against the DB
* Rename db to db_local in check_diskspace to clarify some code
* Fix some line wrapping to respect 80 characters
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Turn it into a configure-type typedef, which allows us to reduce the
amount of duplicated code and clean up some #ifdef magic in the code
itself. Adjust some of the other defined checks to look at the headers
available rather than trying to pull in the right ones based on
configure checks.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Checking disk space needed for a transaction can take a while so add
an informative progress bar.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Disk space checking is likely to be an unnecessary bottleneck to
people with reasonable partition sizes so add a configuration option
to allow it to be disabled/enabled as wanted.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Pull together the work of the previous commits to implement a check
for enough free space before performing an install transaction. Abort
if there is not enough free space with an appropriate pm_errno..
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Two helper function are added to calculate the disk usage from packages
that are either currently installed on the system or from a package
archive.
Some minor approximations have been made:
1. Size for directories is not considered when removing a package from the
filesystem to avoid multiple counting across packages. Also, these are
reported to take zero size while installing.
2. Symlinks are reported to contribute zero size towards removal as
libarchive reports them to have zero size for install.
3. Package data files (.PKGINFO, .INSTALL, .CHANGELOG) are counted towards
usage on dbpath on install, but their size is not counted on package
removal.
4. No handling of extra size needed for .pacsave/.pacnew files.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
For a given file, determine which mount point it is on or will be
installed to. Take into account that we might be using an alternative
installation root.
Add additional helper function added to sort mount point list for easier
matching.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a mount_point_list() function that attempts to portably obtain
a list of system mount points and a struct to hold needed mount point
information.
Abort the transaction if we are unable to determine the mount points.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Very basic prototyping for adding functionality to check free disk
space before performing package installs.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This macro is deemed unnecessary by even the autoconf guys, so we really
don't need to use it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We were including the header in a lot of places it is no longer used.
Additionally, use the correct autoconf macro for determining whether
d_type is available as a member: HAVE_STRUCT_DIRENT_D_TYPE.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a delta specific definition so it makes more sense to put
it in the delta specific header file.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow us to eventually combine the depends and desc entries
within the sync database.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When a -Sk or -Uk operation induced a removal of an existing local
package, --dbonly was not in effect and the files were all removed.
Fixing this behavior was already marked as TODO in database012 pactest
------------
TODO: I honestly think the above should NOT delete the original les, it
hould upgrade the DB entry without touching anything on the file stem.
E.g. this test should be the same as:
pacman -R --dbonly dummy && pacman -U --dbonly dummy.pkg.tar.gz
------------
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
[Dan: small coding style touchup]
Signed-off-by: Dan McGee <dan@archlinux.org>
Either we expose all low levels function dealing with pmdepend_t
(splitdep and depfree come to mind), or we don't.
Since none of the tools use depcmp, I chose to remove it. In the future,
we might want to expose higher level functions such as
alpm_find_satisfier, or just lower level functions like splitdep and
depfree together with depcmp.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This has been replaced by the more flexible alpm_find_satisfier
function, and alpm_deptest was completely unsused now.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
whatprovides and splitdep were removed, so depcmp alone is quite useless
now without splitdep, and deptest is not flexible enough.
Introduce a new alpm_find_satisfier which is hopefully more flexible,
this should make implementation of deptest very easy, and also help alpm
tools such as pactree.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch is only meant for 3.4.x. It prepares the place for the future
epoch-aware release.
All force packages that get reinstalled or upgraded will get an EPOCH
entry in the local database, and thus the new pacman with epoch won't
reinstall them by mistake on the first -Su.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
If we have a corrupted database, a package can come through without an arch,
causing the code to blow up when making strcmp() calls. It might even be
possible with perfectly valid database entries lacking an 'arch =' line.
This behavior was seen as at least one of the problems in FS#21668.
Ensure pkgarch is not null before doing anything further.
Signed-off-by: Dan McGee <dan@archlinux.org>
$ pacman -Rd kde-meta
Remove (15): kde-meta-kdewebdev-4.5-1 [0.00 MB] kde-meta-kdeutils-4.5-1 [0.00 MB]
kde-meta-kdetoys-4.5-1 [0.00 MB] kde-meta-kdesdk-4.5-1 [0.00 MB]
kde-meta-kdeplasma-addons-4.5-1 [0.00 MB] kde-meta-kdepim-4.5-1 [0.00 MB]
kde-meta-kdenetwork-4.5-1 [0.00 MB] kde-meta-kdemultimedia-4.5-1 [0.00 MB]
kde-meta-kdegraphics-4.5-1 [0.00 MB] kde-meta-kdegames-4.5-1 [0.00 MB]
kde-meta-kdeedu-4.5-1 [0.00 MB] kde-meta-kdebase-4.5-1 [0.00 MB]
kde-meta-kdeartwork-4.5-1 [0.00 MB] kde-meta-kdeadmin-4.5-1 [0.00 MB]
kde-meta-kdeaccessibility-4.5-1 [0.00 MB]
Total Removed Size: 0.06 MB
Do you want to remove these packages? [Y/n]
( 1/15) removing kde-meta-kdewebdev [------------------------] 100%
$ it stopped here..
On one side, libalpm did not initialize the progress bar at 0 percent.
So with meta-packages that have 0 files, there was only one progress bar
call with percent == 100.
On the other side, pacman callback kept track of the last percent that
it received. When there are only meta-packages, we always received only
100, so pacman believed the progress bar needed not update. Thus only
the first package was actually displayed.
A proper fix for the callback would be to keep track of last package
name to make sure the recorded prev percent applies.
But since we now specify that both Add and Remove should at least send
percent=0 at beginning and percent=100 at the end, there is no need
for that.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We still need to read force entry in epoch-aware pacman, so that when we
install an old force package, EPOCH gets written to the local db.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow for better control of what was previously the 'force' option
in a PKGBUILD and transferred into the built package.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove unnecessary parsing of fields not found in local desc files.
Leave %FORCE% parsing as this likely will make an appearance in desc
files in the future.
Signed-off-by: Allan McRae <allan@archlinux.org>
The splitname function is a general utility function and so is better
suited to util.h. Rename it to _alpm_splitname to indicate it is an
internal libalpm function as was the case prior to splitting local and
sync db handling.
Signed-off-by: Allan McRae <allan@archlinux.org>
These functions are only needed by be_local and were only promoted
to db.{h,c} as part of the splitting of handling the local and sync
dbs. Move them into be_local.c and make them static again.
Signed-off-by: Allan McRae <allan@archlinux.org>
Read in list of packages for sync db from tar archive.
Breaks reading in _alpm_sync_db_read and a lot of pactests (which
is expected as they do not handle sync db in archives...).
Signed-off-by: Allan McRae <allan@archlinux.org>
Put the db_operations struct to use and completely split the handling
of the sync and local databases.
Signed-off-by: Allan McRae <allan@archlinux.org>
The file be_files.c is "split" to be_local.c and be_sync.c in order
to achieve separate handling of sync and local databases.
Some basic clean-up of functions that are only of use for local or
sync databases has been performed and some rough function renaming
in duplicated code has been performed to prevent compilation errors.
However, most of the clean-up and final separation of sync and local
db handling occurs in following patches.
Signed-off-by: Allan McRae <allan@archlinux.org>
These will be needed for the handling of both local and sync database
caches, so put them in a common location.
Signed-off-by: Allan McRae <allan@archlinux.org>
Move splitname, checkdbdir, get_pkgpath into db.{h,c} as these will be
needed to parse both the local and sync databases during the initial
splitting. They will be moved out of db.{h,c} at to more appropriate
locations at a later stage.
Signed-off-by: Allan McRae <allan@archlinux.org>
It doesn't do a whole lot yet, but these type of operations will
potentially be different for the DBs we load.
Signed-off-by: Dan McGee <dan@archlinux.org>
Cache bullshit only has relevance to be_files, so move it there.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: BIG rebase]
Signed-off-by: Allan McRae <allan@archlinux.org>
Hopefully we've finally arrived at package handling nirvana, or at least
this commit will get us a heck of a lot closer. The former method of getting
the depends list for a package was the following:
1. call alpm_pkg_get_depends()
2. this method would check if the package came from the cache
3. if so, ensure our cache level is correct, otherwise call db_load
4. finally return the depends list
Why did this suck? Because getting the depends list from the package
shouldn't care about whether the package was loaded from a file, from the
'package cache', or some other system which we can't even use because the
damn thing is so complicated. It should just return the depends list.
So what does this commit change? It adds a pointer to a struct of function
pointers to every package for all of these 'package operations' as I've
decided to call them (I know, sounds completely straightforward, right?). So
now when we call an alpm_pkg_get-* function, we don't do any of the cache
logic or anything else there- we let the actual backend handle it by
delegating all work to the method at pkg->ops->get_depends.
Now that be_package has achieved equal status with be_files, we can treat
packages from these completely different load points differently. We know a
package loaded from a zip file will have all of its fields populated, so
we can set up all its accessor functions to be direct accessors. On the
other hand, the packages loaded from the local and sync DBs are not always
fully-loaded, so their accessor functions are routed through the same logic
as before.
Net result? More code. However, this code now make it roughly 52 times
easier to open the door to something like a read-only tar.gz database
backend.
Are you still reading? I'm impressed. Looking at the patch will probably be
clearer than this long-winded explanation.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: rebase and adjust]
Signed-off-by: Allan McRae <allan@archlinux.org>
Implement this seemingly simple change in package.h:
typedef enum _pmpkgfrom_t {
- PKG_FROM_CACHE = 1,
- PKG_FROM_FILE
+ PKG_FROM_FILE = 1,
+ PKG_FROM_LOCALDB,
+ PKG_FROM_SYNCDB
} pmpkgfrom_t;
which requires flushing out several assumptions from around the codebase
with regards to usage of the PKG_FROM_CACHE value. Make some changes where
required to allow the switch, and now the correct value should be set (via a
crude hack) depending on whether a package was loaded as an entry in a local
db or a sync db.
This patch underwent some big rebasing from Allan and Dan.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Move almost all of the caching related stuff into a single #define
(which should maybe even just be a static function) so we don't
duplicate logic all over the place. This also makes the code a heck of a
lot shorter and means further changes to this stuff don't have to touch
each and every getter function.
Signed-off-by: Dan McGee <dan@archlinux.org>
We weren't reading this in from our packages, thus causing us not to write
it out to our local database. Adding this now will help ease the upgrade
path for epoch later and not require reinstallation of all force packages.
Signed-off-by: Dan McGee <dan@archlinux.org>
On Linux and OS X, we can determine if an entry obtained through a readdir()
call is a directory without also having to stat it. This can save a
significant number of syscalls. The performance increase isn't dramatic, but
it could be on some platforms (e.g. Cygwin) so it shouldn't hurt to use this
unconditionally where supported.
Signed-off-by: Dan McGee <dan@archlinux.org>
I don't know what I tested in commit 3e7b90ff69, but it definitely wasn't
working as advertised. Fix the checks in the source code itself to match the
right define (HAVE_LIBFETCH), as well as make sure the configure check
defaults to looking for the library but not bailing if it could not be
found.
Signed-off-by: Dan McGee <dan@archlinux.org>
It touched up these a bit after it ran, so might as well check the changes
in so we don't have to deal with them again later.
Signed-off-by: Dan McGee <dan@archlinux.org>
Model it after the new OpenSSL check, and have it be a bit more useful. If
you do not explicitly pass a command line option, it will be linked if
available but will not error out if it is missing. Also bump the version to
that where connection caching was introduced as we use these new features in
the codebase.
Signed-off-by: Dan McGee <dan@archlinux.org>
I've noticed my Atom-powered laptop is dog-slow when doing integrity checks
on packages, and it turns out our MD5 implementation isn't near as good as
that provided by OpenSSL. Using their routines instead provided anywhere
from a 1.4x up to a 1.8x performance benefit over our built-in MD5 function.
This does not remove the MD5 code from our codebase, but it does enable
linking against OpenSSL to get their much faster implementation if it is
available on whatever platform you are using. At configure-time, we will
default to using it if it is available, but this can be easily changed by
using the `--with-openssl` or `--without-openssl` arguments to configure.
Signed-off-by: Dan McGee <dan@archlinux.org>
This gave at least a 10% improvement on a few tested platforms due to the
reduced number of read calls from files when computing the md5sum. It really
is just a precursor to another patch to come which is to use MD5 functions
that do the job a lot better than anything we can do.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is being checked in as 'pt' rather than 'pt_PT' as that is what
Transifex seems to want, and it is also the dominant choice of packages
already installed on my system when doing a count of the files located in
the /usr/share/locale translation directories.
Thanks for the new translation!
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#18770, and hopefully an occasional deadlock in my frontend as well.
For simplicity it redirects all scriptlet output through SCRIPTLET_INFO, and
all callbacks in the child process have been replaced for thread-safety.
Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The combination of tabs and spaces is annoying in any editor that
does not use a tab width of 2 spaces.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
From the fgets manpage:
fgets() reads in at most one less than size characters from stream and
stores them into the buffer pointed to by s. Reading stops after an EOF
or a newline. If a newline is read, it is stored into the buffer. A
'\0' is stored after the last character in the buffer.
This means there is no need at all to do 'size - 1' math. Remove all of that
and just use sizeof() for simplicity on the buffer we plan on reading into.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow downloads to reuse connections if possible, which could make
big differences on perceived FTP speed as the connection won't have to be
reestablished each time. For the most part, HTTP requests wouldn't be using
keep alive anyway so this won't have an effect there.
I'm not enthused about having to do this with the library initialization,
but there isn't a much better place due to the fact that the loop over
databases occurs on the frontend and not the backend.
Signed-off-by: Dan McGee <dan@archlinux.org>
We no longer use these anywhere outside of sync.c, so do the rename and add
static to their definition to meet our coding standards.
Signed-off-by: Dan McGee <dan@archlinux.org>
As reported in FS#20221, we don't always do the right thing when installing
a group and using the --needed option. This was due to the code pulling
packages based on what was already in the transaction's add list, but
completely ignoring the fact that we may have already seen and skipped this
same package in an earlier repository.
Add a list to the private _alpm_sync_pkg() function that allows us to have
this extra information so we don't mistakenly downgrade a package when using
--needed.
Signed-off-by: Dan McGee <dan@archlinux.org>
The sync db should be stored in the sync/ folder. This cleans up
DBPath to only have local/ and sync/ directories in it.
A nice side effect is that the db are now in the right place so we
can implement directly reading from them.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
With commit 5dffef78, the repo database always has a symlink
of the form reponame.db. Use that filename and let libarchive
determine the compression type.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Prevents compiler warnings when building with -D_FORTIFY_SOURCE=2
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Check that writing to destination file actually occurs in
_alpm_copyfile. Required adding a new error (PM_ERR_WRITE)
as none of the others appeared appropriate.
Prevents compiler warning when using -D_FORTIFY_SOURCE=2.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The casting of nread is safe as it is tested to be >0 when it is
initally assigned. It is also being implicitly cast in the fwrite
call in the line above.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than say we can't find the target after saying "No, I guess I don't
want to install this", we should make sure the ignored status gets passed
all the way through. This fixes FS#19866.
Pactest is also included that failed before due to the fact that we normally
treat an unfound package as a reason to exit with a non-zero status.
Signed-off-by: Dan McGee <dan@archlinux.org>
Follow the HACKING guidelines and always use != 0 or == 0 rather
than negation within conditional statements to improve clarity.
Most of these are !strcmp usages which is the example of what not
to do in the HACKING document.
Signed-off-by: Allan McRae <allan@archlinux.org>
Use strcoll to compare package names to provide output sorted
according to a users LC_COLLATE settings.
Signed-off-by: Andres P <aepd87@gmail.com>
[Allan: added commit message]
Signed-off-by: Allan McRae <allan@archlinux.org>
Fix the '\t' characters that got introduced by the last update of this
translation that should not have been there.
Signed-off-by: Dan McGee <dan@archlinux.org>
This puts us more in line with other projects that don't attach the country
code to the language code.
$ du -sh /usr/share/locale/nb*/LC_MESSAGES
3.5M /usr/share/locale/nb/LC_MESSAGES
132K /usr/share/locale/nb_NO/LC_MESSAGES
Signed-off-by: Dan McGee <dan@archlinux.org>
This puts us more in line with other projects that don't attach the country
code to the language code.
$ du -sh /usr/share/locale/sv*/LC_MESSAGES
7.2M /usr/share/locale/sv/LC_MESSAGES
60K /usr/share/locale/sv_SE/LC_MESSAGES
Signed-off-by: Dan McGee <dan@archlinux.org>
Thanks to CalimeroTeknik <calimeroteknik@free.fr> for providing many
corrections !
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch fixes the phonon/qt issue, if all to-be-upgraded packages are
explicit targets (ie. only not-yet-installed packages are pulled by
resolvedeps). This condition covers the most common situations, for example
it should hold with every -Su operation.
After this patch sync405.py passes, but sync406.py doesn't.
The work is inspired by the patch of Henning Garus, thanks for his work:
http://mailman.archlinux.org/pipermail/pacman-dev/2010-February/010429.html
(I moved the alpm_list_diff computation to sync.c in order to compute it
only once.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit df99495b82 pacman downloaded files from the first repo only,
and reported corrupted packages for all files from other repos.
The download_size was set to 0 for _all_ transaction packages after
downloading some files from the first repo. This code-block was moved to its
correct place.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The request of FS#12950 is implemented.
On the backend side, I introduced a new function, alpm_db_set_pkgreason(),
to modify the install reason of a package in the local database. On the
front-end side, I introduced a new main operation, -D/--database, which has
two options, --asdeps and --asexplicit. I documented this in pacman manual.
I've created two pactests to test -D: database001.py and database002.py.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
It isn't really necessary here and it helps us get rid of some link
pollution so we can have a slim vercmp binary.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will facilitate using this object file on its own in the vercmp tool
which will be done in a future commit. The net impact on the generated
binaries should not be noticeable after this commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
Just as we do in -Qi, we can compute required by information for sync
database packages. The behavior seems sane; for a given package, the -Sii
required by will show all packages in *any* sync database that require it.
Implements FS#16244.
Signed-off-by: Dan McGee <dan@archlinux.org>
Basically I'm the idiot that thought I could make it better and completely
forgot how freeing the contents of the original lists would screw up our
nice little diff extraction lists. This caused segfaults among other
problems. Last time I try to do that...
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff627ce26 in strcmp () from /lib/libc.so.6
(gdb) bt
Signed-off-by: Dan McGee <dan@archlinux.org>
Follow-up to the previous "Only extract new DB entries" patch; move the
partial extraction code inside one side of the loop so we can use the same
code for actually doing file extraction.
Signed-off-by: Dan McGee <dan@archlinux.org>
This implements FS#15198. The idea apparently came from Csaba Henk
<csaba-ml <at> creo.hu> which submitted a patch to Frugalware, so thanks to
him, even though I did not look at the code :)
The idea is to only extract folders for new packages into the package
database and clean up the old directories. This is essentially implementing
Xyne's "rebase" script within pacman.
If using -Syy, just remove and extract everything.
If using -Sy :
1. Generate list of directories in DB
2. Generate list of directories in archive
3. Compare both
4. Clean up old directories
5. Extract new directories
Original-work-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: fix compile error, s/int/size_t/]
Signed-off-by: Dan McGee <dan@archlinux.org>
We free'd the handle but didn't NULL out the global variable, leading to
problems if you try to reinitialize the library. Make sure we clean up after
ourselves.
Signed-off-by: Dan McGee <dan@archlinux.org>
download_internal is supposed to always set pm_errno but did not in many
cases.
The most important (and tested) change is the one concerning fetchStat. This
is typically where the code will fail when the network is down for example.
Before commit d2dbb04a9a, this fetchStat call did not exist and the
same kind of errors would be encountered in the fetchXGet call that follows.
I just copied the error printing to restore the old behavior.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Some users reported duplicated database entries in /var/lib/pacman/local/,
for example, both foo-1.0-1 and foo-2.0-1 subdirectories existed. (Bogus
3rd-party scripts, backup?) In this case pacman reported no error and its
behaviour was mysterious.
From now on, pacman detects this situation and prints an error message.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a bit embarrassing. For example:
$ pacman -Qi mesa
...
Required By : mesa mesa mesa mesa mesa mesa
Something is clearly not right, and the problem was introduced in commit
0bc961. Fix the issue by getting the package name off the correct variable.
Signed-off-by: Dan McGee <dan@archlinux.org>
Sorry for this being such a huge patch, but I believe it is necessary for
quite a few reasons which I will attempt to explain herein. I've been
mulling this over for a while, but wasn't super happy with making the
download interface more complex. Instead, if we carefully order things in
the internal download code, we can actually make the interface simpler.
1. FS#15657 - This involves `name.db.tar.gz.part` files being left around the
filesystem, and then causing all sorts of issues when someone attempts to
rerun the operation they canceled. We need to ensure that if we resume a
download, we are resuming it on exactly the same file; if we cannot be
almost postive of that then we need to start over.
2. http://www.mail-archive.com/pacman-dev@archlinux.org/msg03536.html - Here
we have a lighttpd bug to ruin the day. If we send both a Range: header and
If-Modified-Since: header across the wire in a GET request, lighttpd doesn't
do what we want in several cases. If the file hadn't been modified, it
returns a '304 Not Modified' instead of a '206 Partial Content'. We need to
do a stat (e.g. HEAD in HTTP terms) operation here, and the proceed
accordingly based off the values we get back from it.
3. The mtime stuff was rather ugly, and relied on the called function to
write back to a passed in reference, which isn't the greatest. Instead, use
the power of the filesystem to contain this info. Every file downloaded
internally is now carefully timestamped with the remote file time. This
should allow the resume logic to work. In order to guarantee this, we need
to implement a signal handler that catches interrupts, notifies the running
code, and causes it to set the mtimes on the file. It then rethrows the
signal so the pacman signal handler (or any frontend) works as expected.
4. We did a lot of funky stuff in trying to track the DB last modified time.
It is a lot easier to just keep the downloaded DB file around and track the
time on that rather than in a funky dot file. It also kills a lot of code.
5. For GPG verification of the databases down the road, we are going to need
the DB file around for at least a short bit of time anyway, so this gets us
closer to that.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Xav: fixed printf with off_t]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
* It makes the code clearer to read/understand
* Cppcheck tool doesn't show this anymore: [./util.c:215]: (error) Resource leak: fd
[Dan: don't change the coding style]
Signed-off-by: Dan McGee <dan@archlinux.org>
Thanks to Laszlo Papp <djszapi@archlinux.us> for the following catch:
opendir(path)) == (DIR *)-1;
is maybe the result of misunderstanding the manpage. If an opendir() call
isn't successful it returns NULL rather than '(DIR *)-1'.
Noticed-by: Laszlo Papp <djszapi@archlinux.us>
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm_pkg_get_name() gives us little benefit in backend code besides a NULL
check on the package passed in; we could do that ourself if necessary. By
changing to direct references in the cases where we are sure we have a valid
package, we save a function call each time we need a package name. This
function can't be inlined because it is externally accessible.
This cuts the calls to get_name() from 1.3 million times in a
pacman -Qu operation to around 2400.
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes the following valgrind warning :
==26831== Syscall param rt_sigaction(act->sa_flags) points to uninitialised
byte(s)
==26831== at 0x4282547: __libc_sigaction (in /lib/libc-2.10.1.so)
==26831== by 0x403C693: download_internal (dload.c:152)
==26831== by 0x403D0E4: _alpm_download_single_file (dload.c:311)
==26831== by 0x4033B72: alpm_db_update (be_files.c:319)
==26831== by 0x805205E: pacman_sync (sync.c:257)
==26831== by 0x804EE54: main (pacman.c:1120)
==26831== Address 0xbec6cc04 is on thread 1's stack
==26831==
==26831== Syscall param rt_sigaction(act->sa_restorer) points to
uninitialised byte(s)
==26831== at 0x4282547: __libc_sigaction (in /lib/libc-2.10.1.so)
==26831== by 0x403C693: download_internal (dload.c:152)
==26831== by 0x403D0E4: _alpm_download_single_file (dload.c:311)
==26831== by 0x4033B72: alpm_db_update (be_files.c:319)
==26831== by 0x805205E: pacman_sync (sync.c:257)
==26831== by 0x804EE54: main (pacman.c:1120)
==26831== Address 0xbec6cc08 is on thread 1's stack
==26831==
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Pacman's fgets function in the API used hardcoded numbers to identify the size.
This is not good practice, so replace them with sizeof handling.
Signed-off-by: Laszlo Papp <djszapi@archlinux.us>
Signed-off-by: Dan McGee <dan@archlinux.org>
This offers a cleaner way to deal with constant in enum and allow easy
maintainance
Signed-off-by: solsTiCe d'Hiver <solstice.dhiver@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
If the -d switch was invoked with -S (or -U), the removes list was simply
lost, because trans->remove was computed in an
"if(!(trans->flags & PM_TRANS_FLAG_NODEPS))" block.
I've added a new pactest file, sync045.py (derived from sync043.py) to test
this.
Additionally, I did some other minor cleanups in sync_prepare:
* preferred list is not needed anymore
* I removed a needless alpm_list_remove_dupes line (the target list should
not contain dupes at all)
* I moved alpm_list_free(remove); to cleanup part to eliminate a possible
memleak
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is more efficient than alpm_list_diff since it assumes the two lists
are sorted. And also we get the two sides of the diff.
Even sorting should more efficient than the current list_diff. Sorting the
two lists should be O(n*log(n)+m*log(m)) while the current list_diff is
O(n*m). So I also reimplemented list_diff using list_diff_sorted.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't need to count the number of packages left once per file when
removing; we only need to do it once per package. Also move a variable into
the correct scope.
Signed-off-by: Dan McGee <dan@archlinux.org>
After our recent screwup with size_t and ssize_t in the download code, I
found the `-Wsign-conversion` flag to GCC to see if we were doing anything
else boneheaded. I didn't find anything quite as bad, but we did have some
goofups- most of our public unsigned methods would return -1 on error, which
is a bit odd in an unsigned context.
Signed-off-by: Dan McGee <dan@archlinux.org>
A NULL list element triggered an infinite loop. Not cool :)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
fetchIO_read returns -1 in case of error, and the return type is
ssize_t, not size_t ! So we converted -1 to an unsigned, which led to
huge file write.
The rest is just changing the error return a bit.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Get them a bit more standardized across the board, as they were quite a
mess. Also note the two new translations we received for 3.3.1.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is for 3.3.0, not for 3.3.1. But since there are only like 10 messages
missing, it seems worth including now.
Signed-off-by: Christian Larsson <congacx@gmail.com>
Signed-off-by: Laszlo Papp <djszapi2@archlinux.us>
[Dan: fix some busted translation strings]
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 34e1413d75 attempted to implement lazy loading of package databases.
Although it took care of my main complaint (creating the database directory
if it didn't exist), it didn't allow sync repos to be registered before
alpm_option_set_dbpath() had been called.
With this patch, we no longer compute the individual repository DB paths
until necessary, allowing full lazy loading to work as intended, and
allowing us to drop the extra setlibpath() calls from the frontend. This
allows the changes introduced in a2cd48960 (but later reverted) to be added
back in again.
Signed-off-by: Dan McGee <dan@archlinux.org>
It was probably a bad idea to modify the target directly in case of
repo/pkg syntax.
Duplicating it also allows us to keep the original target string, which
is more informative when printing errors.
Also remove a duplicated error message from libalpm, and improve the
message already returned to the frontend.
$ pacman -S foo/bar
before
error: repository 'foo' not found
error: 'bar': no such repository
after
error: 'foo/bar': could not find repository for target
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add more untranslated strings, improve consistency, etc.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit 774c252 the --debug output shows 5-6 "syntax error..." lines
for each package. After this patch pacman recognizes makepkgopt as a valid
key, but doesn't do anything.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
-int alpm_trans_sysupgrade(int enable_downgrade);
-int alpm_trans_sync(char *target);
-int alpm_trans_add(char *target);
-int alpm_trans_remove(char *target);
+int alpm_sync_sysupgrade(int enable_downgrade);
+int alpm_sync_target(char *target);
+int alpm_sync_dbtarget(char *db, char *target);
+int alpm_add_target(char *target);
+int alpm_remove_target(char *target);
* functions renaming
* add new sync_dbtarget which allows to specify the db
* repo/ syntax handling is moved to frontend
( should implement FS#15141)
* group handling is moved to backend
( see http://www.archlinux.org/pipermail/pacman-dev/2009-June/008847.html )
This basically started with this change :
/* Transaction */
struct __pmtrans_t {
- pmtranstype_t type;
pmtransflag_t flags;
pmtransstate_t state;
- alpm_list_t *packages; /* list of (pmpkg_t *) */
+ alpm_list_t *add; /* list of (pmpkg_t *) */
+ alpm_list_t *remove; /* list of (pmpkg_t *) */
And then I have to modify all the code accordingly.
This patch utilizes the power of sync.c to fix FS#3492 and FS#5798.
Now an upgrade transaction is just a sync transaction internally (in alpm),
so all sync features are available with -U as well:
* conflict resolving
* sync dependencies from sync repos
* remove unresolvable targets
See http://www.archlinux.org/pipermail/pacman-dev/2009-June/008725.html
for the concept.
We use "mixed" target list, where PKG_FROM_FILE origin indicates local
package file, PKG_FROM_CACHE indicates sync package. The front-end can add
only one type of packages (depending on transaction type) atm, but if alpm
resolves dependencies for -U, we may get a real mixed trans->packages list.
_alpm_pkg_free_trans() was modified so that it can handle both target types
_alpm_add_prepare() was removed, we use _alpm_sync_prepare() instead
_alpm_add_commit() was renamed to _alpm_upgrade_targets()
sync.c (and deps.c) was modified slightly to handle mixed target lists,
the modifications are straightforward. There is one notable change here: We
don't create new upgrade trans in sync.c, we replace the pkgcache entries
with the loaded package files in the target list (this is a bit hackish) and
call _alpm_upgrade_targets(). This implies a TODO (pkg->origin_data.db is
not accessible anymore), but it doesn't hurt anything with pacman front-end,
so it will be fixed later (otherwise this patch would be huge).
I updated the documentation of -U and I added a new pactest, upgrade090.py,
to test the syncdeps feature of -U.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Sometimes "foo conflicts with bar" information is not enough, see this
thread: http://bbs.archlinux.org/viewtopic.php?id=77647. That's why I added
a new reason field to our pmconflict_t struct that stores the packager-
defined conflict that induced the fact that package1 conflicts with
package2.
I modified the front-end (in callback.c, sync.c, upgrade.c) to print this
new information as well.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
This function is unused since commit
358cc5804a.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: also kill from util.h]
Signed-off-by: Dan McGee <dan@archlinux.org>
- fix one memleak if get_filename failed
- cleanup according to Joerg's feedback:
"url_for_string: If fetchParseURL returned successful, you should always
have a scheme set. The logic for anonftp should only be needed for very
broken server -- do you know of any such?
download_internal:
Specifying 'p' is now a nop -- it is tried by default first with
fall-back to active FTP."
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: remove from pacman.conf and pacman.conf.5]
Signed-off-by: Dan McGee <dan@archlinux.org>
libfetch supports checking mtime so we do not need to do it manually.
when the databases are already up-to-date, initiating a connection with
fetchXGet and closing it right after with fetchIO_close took a very long
time (up to 10min!) on some network.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
(cherry picked from commit d7675e393f)
We had 10000 as our timeout value, assuming it was expressed in ms. This is
false after looking at the current code, so reset it back to 10 seconds.
Addresses FS#15369.
Signed-off-by: Dan McGee <dan@archlinux.org>
I assume the loop was never iterated more than once, because the write
location was not updated at each loop iteration (buffer instead of buffer +
nwritten), yet we never had reports of corrupted download.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
libfetch supports checking mtime so we do not need to do it manually.
when the databases are already up-to-date, initiating a connection with
fetchXGet and closing it right after with fetchIO_close took a very long
time (up to 10min!) on some network.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
If /sbin is not in the PATH and sudo is used, ldconfig cannot be found. So
use /sbin/ldconfig instead. The code checked for the existence of
/sbin/ldconfig anyway..
Signed-off-by: Marc - A. Dahlhaus <mad@wol.de>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit 30c4d53ce5, get_destfile and
get_tempfile are only used for internal download, so move these two
functions inside the ifdef
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
'make distcheck' had issues with this one and reformatted it. In addition,
it found a fuzzy message which is now fixed due to an inadvertent msgid
edit.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows a frontend to define its own download algorithm so that the
libfetch dependency can be omitted without using an external process.
The callback will be used when if it is defined, otherwise the old
behavior applies.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
[Dan: minor cleanups]
Signed-off-by: Dan McGee <dan@archlinux.org>
If the user switches from unstable repo to a stable one, it is quite hard to
sync its system with the new repo (the user will see many "Local is newer
than stable" messages, nothing more). That's why I introduced -Suu, which
treats a sync package like an upgrade, iff the package version doesn't match
with the local one's.
I added a new pactest (sync104.py) to test this, and I updated the
documentation of -Su.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: slight doc reword]
Signed-off-by: Dan McGee <dan@archlinux.org>
This happens for example if you install a new package, and one of its
backup config file is already on the file system.
If the local file was different, it was saved to .pacorig which is fine.
However if the local file and pkg file were the same, the pkg file
(temporarily extracted as .paccheck) was left on the system.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#15546
Also fix the interface of unlink_file which was really stupid..
(alpm_list_t used with only one element)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
A package can now replace symdir->dir by dir without fileconflicts.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
When one package wants to replace a directory by a file, we check that all
files in that directory were owned by that package.
Additionally pacman can be more verbose when the extraction of the symlink
(or file) fails. The patch to add.c looks more complex than it is, I just
moved and reindented code to handle cases 10 and 11 together.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#15294.
The code to run a command inside a chroot was refactored from the
_alpm_runscriptlet function to _alpm_run_chroot.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
See FS#14642- this allows -Qs output to be fed back into pacman without
problems or having to strip off the 'local/' prefix manually.
Signed-off-by: Dan McGee <dan@archlinux.org>
See FS#13099. This makes sense especially for the pacman frontend, as we
show groups in the search output.
Signed-off-by: Dan McGee <dan@archlinux.org>
$ sudo pacman -S mc
Old output:
***********
:: mc conflicts with mc-mp. Remove mc-mp? [Y/n] y
...
(1/1) checking for file conflicts [################] 100%
(1/1) installing mc [################] 100%
New output:
***********
:: mc conflicts with mc-mp. Remove mc-mp? [Y/n] y
...
(1/1) checking for file conflicts [################] 100%
(1/1) removing mc-mp [################] 100%
(1/1) installing mc [################] 100%
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#14899. When running an -Sp operation without servers
configured for a repository, we would segfault, so add an assert to the
backend method returning the first server preventing a null pointer
dereference.
In addition, add a new error code to libalpm that indicates we have no
servers configured for a repository. This makes -Sy and -S <package>
operations fail gracefully and helpfully when a repo is set up with no
servers, as the default mirrorlist in Arch is provided this way.
Signed-off-by: Dan McGee <dan@archlinux.org>
The main purpose of this function to make our code more readable.
It frees transaction specific fields of pmpkg_t. (It is used when a package
is removed from the target list.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
There is apparently no need to handle the re-compression manually when
applying a xdelta patch in case of bzip2 or xz.
Only gzip needs to be handled specifically for disabling timestamp with the
-n option.
After this patch, if xdelta is enhanced with xz support (1-line patch), it
will be transparent from pacman side.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This flag indicates that the front-end will not call alpm_trans_commit(),
so the database needn't be locked. This is the first step toward fixing
FS#8905.
If this flag is set, alpm_trans_commit() does nothing and returns with
an error (that has new code: PM_ERR_TRANS_NOT_LOCKED).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
"Foo replaces bar" simply means that "foo is a new version of bar".
So this patch refactors the code to use this "rule".
_alpm_sync_sysupgrade now does the following for each local package [bar]
(pseudo-code):
for db in syncdbs {
if(db contains bar) {check if db/bar is an upgrade; break;}
replacers = find(bar replacers in db);
if(replacers!=NULL) {ask_user; break;}
}
Note:
1. Replacers are grouped per repo. If more than one package replace bar in
a repo, all of them are considered ("package set of bar replacers").
2. If repo1/foo1 and repo2/foo2 both replaces bar, only repo1/foo1 is
considered (if repo1 stands before repo2 in pacman.conf). FS#11737 is fixed.
3. It can happen that pacman doesn't consider any replacer, if it found a
literal "earlier", so sync132.py modified accordingly (btw, that situation
should not appear irl).
The new sysupgrade code doesn't use sync_newversion(), so I removed the
"local is newer than repo" message, which was annoying with -Qu and
SyncFirst.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes a bug introduced by my previous changes which changes the
behavior of IgnorePkg/IgnoreGroup to allow the user to remove unresolvable
packages from the transaction. The bug is that the target-list was no
longer being consulted first to resolve dependencies, which means that if
two packages in the sync database satisfied a dependency, and the user
explicitly requested one of those two packages in the sync, the other
package was still being pulled in.
A new test was added, sync993.py, to verify the desired behavior.
Signed-off-by: Bryan Ischo <bji-keyword-pacman.3644cb@www.ischo.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
pmsyncpkg_t data sructure was removed:
1. pmpkg_t.reason is used instead of pmsyncpkg_t.newreason. (The target
packages come from sync repos, so we can use this field without any
problems. Upgrade transaction also uses this field to store this info.)
2. pmsyncpkg_t.removes was moved to pmpkg_t.removes.
This step requires careful programming, because we don't duplicate packages
when we add them to trans->packages. So we modify sync pkgcache when we
add this transaction-only info to our package. Hence it is important to
free this list when we remove any package from the target list
(remove_unresolvable, remove_conflicts, trans_free), otherwise this could
confuse the new sync transactions (with non-pacman GUI).
Overall, our code became ~100 line shorter, and we can call our helper
functions directly on trans->packages in sync.c, we don't need to maintain
parallel package lists.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
From now on _alpm_db_find_fileconflicts() works with upgrade and remove
target lists (like checkdeps), which makes it transaction independent
(we still need a trans param because of the progressbar). This is a small
step towards the universal transaction. So we call this function directly
from sync.c before commiting the remove transaction. This is much safer,
but we can get false fileconflict error alarms in some tricky cases
("symlinks puzzle" etc).
The patch on find_fileconflict looks complex, but it is mainly an
"indent-patch", the new code-part can be found after the
/* check remove list ... */ comment, and I modified something around the
"file has changed hand" case (see comment modifications in the code).
Unfortunately sync.c became more ugly, because we have to create 2 parallel
internal transactions: to avoid duplicated work, upgrade transaction is
used to load package data (filelists). This problem will disappear, when
we finally get rid of internal transactions.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Resolvedeps reports error when it cannot resolve some dependencies, puts
them into the *data list, and set pm_errno. If user removes the
unresolvable packages from the target list, we have no error anymore,
so from now on we free *data list (we eliminate a memleak) and unset
pm_errno.
(Additionally I removed two needless lines from the code, unresolvable list
is always freed in cleanup.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit f57f8d3386 pacman *silently*
ignores packages from IgnorePkg/IgnoreGroup during dependency resolving,
if prompt == 0. This behavior is changed to "give warning + ignore".
(Otherwise the user is not informed about the fact that the package
resolving was blocked by ignorepkg.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch fixes FS#12059.
Now sync_addtarget can return with PM_ERR_PKG_IGNORED, which indicates that
although the requested package was found it is in ignorepkg, so alpm could
not add it to the transaction. So the front-end can decide what to do.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds alpm_db_update() to the alpm_databases Doxygen group. The function
is described in more detail and a code example is given.
Signed-off-by: Dan McGee <dan@archlinux.org>
1) The changes to sync.c look big but there are mostly caused by
the indentation. Fix a bug where download_size == 0 because the packages and
deltas are already in the cache, but we still need to build the deltas list
and apply the deltas to create the final package.
2) Fix the gzip / md5sum issue by switching to xdelta3, disabling external
recompression and using gzip -n in pacman, and disable bsdtar compression
and using gzip -n in makepkg.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
This reverts commit 9558639d80.
This change was wrong, popen does require /bin/sh in a subchroot.
1) pacman -S lilo -r root
Notice no error
2) rm root/bin/sh ; pacman -S lilo -r root
Notice an error :
error: scriptlet failed to execute correctly
Actually, we already get an explicit error here, when popen is run, so there
is no need to check for bin/sh explicitely.
Besides this check was problematic in some cases. For example, bash itself
has a scriptlet, but only post_install and post_upgrade, no pre_install and
pre_upgrade. However, since bash has a scriptlet, runscriptlet will also be
called before bash is installed. It won't do anything since the scriptlet
has no pre_install function. But if we keep the check, we will still get
"error : no /bin/sh".
Conflicts:
lib/libalpm/trans.c
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a bug I noticed 2 years ago :
http://www.nabble.com/Re%3A-logging-output-crazy-to11437357.html#a11479679
I thought I fixed it with 57d77eab32
But the bug was still here. Reading man fork, this part caught my attention:
* The child inherits copies of the parent's set of open file
descriptors. Each file descriptor in the child refers to the same open
file description (see open(2)) as the corresponding file descriptor in the
parent. This means that the two descriptors share open file status
flags, current file offset, and signal-driven I/O attributes (see the
description of F_SETOWN and F_SETSIG in fcntl(2)).
Since the open file descriptors are inherited, it is probably a good idea to
flush them before forking.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The from_md5 and to_md5 fields were a nice extra safety, which would avoid
trying to apply deltas on corrupted package files. However, they are not
strictly necessary, since xdelta should be able to detect that on its own.
The main problem is that it is impossible to compute these informations from
the delta only. So repo-add would not be able to compute the delta entry
based on just the delta file.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Don't prompt the user for unignore of IgnorePkg/IgnoreGroup packages,
except for packages explicitly listed for sync by the user. This
eliminates many unnecessary prompts when IgnorePkg/IgnoreGroup is
used.
Signed-off-by: Bryan Ischo <bryan@ischo.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Enabled a new prompt to ask the user if they'd like to remove
unresolvable packages from the transaction rather than failing it.
Many pactest tests that used to fail now return success codes, because
pacman now issues a prompt allowing the user to cancel rather than
failing many transactions, and the pactest scripts always choose to
cancel with no error rather than failing. The only net effect is that
the return status of pacman is now 0 in cases where it used to be
nonzero.
Signed-off-by: Bryan Ischo <bryan@ischo.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This change reorganizes the internal code so that packages are
resolved one at a time instead of all at once from a list. This will
allow a future checkin to prompt the user to see if they'd rather
remove unresolvable packages from the transaction and continue, or
fail the transaction. This change does not affect the actual behavior
of libalpm and all tests pass without changes.
Signed-off-by: Bryan Ischo <bryan@ischo.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't need to create the directories when local or sync dbs are
registered. For example, if a sync db does not exist, we cannot even do
"pacman -Q" as an user.
Instead, we can create the local db if needed during the db_prepare
operation, and sync dbs on db_update.
Also remove some more useless abstractions in db_update and switch to a much
more efficient way to remove a sync db : rm -rf.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
These db_open and db_close looked quite useless. And they caused the db
directory to be opened on a simple registering of a database. This is
totally unneeded, this opening can be delayed to when we actually need it.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Instead of appending the prefix to each entry name, we can chdir to the
prefix before extracting, and restoring when it is done.
This seems to work better with the strange and special case of FS#12148
where an archive contained the "./" entry.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
This patch fixes FS#12148 ('unstable' regular file).
I also changed the other archive_entry_set_mode usage in add.c to
archive_entry_set_perm.
Since I cannot find any relevant info in libarchive manual, I quote
Tim Kientzle (the author of libarchive) here, and I say thank you for
his help.
*** Tim Kientzle wrote *************************************
This is the problem in libalpm/util.c:
323 if(S_ISREG(st->st_mode)) {
324 archive_entry_set_mode(entry, 0644);
325 } else if(S_ISDIR(st->st_mode)) {
326 archive_entry_set_mode(entry, 0755);
327 }
Your example unstable.db.tar.gz is not empty. It has
one entry in it, called "./". That entry is marked
as a directory. But, when you call archive_entry_set_mode(),
you are changing the file type! archive_read_extract()
then creates the file /var/unstable as you requested.
(archive_read_extract() will replace an empty directory
with a file.)
You should either set the mode value correctly:
323 if(S_ISREG(st->st_mode)) {
324 archive_entry_set_mode(entry, IFREG | 0644);
325 } else if(S_ISDIR(st->st_mode)) {
326 archive_entry_set_mode(entry, IFDIR | 0755);
327 }
Or use archive_entry_set_perm(), which does not change
the file type:
323 if(S_ISREG(st->st_mode)) {
324 archive_entry_set_perm(entry, 0644);
325 } else if(S_ISDIR(st->st_mode)) {
326 archive_entry_set_perm(entry, 0755);
327 }
************************************************************
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Clearly the old code was more elegant (NULL cache indicated "not loaded"),
but it had some drawbacks, so from now on we indicate the state of caches
explicitly.
Old drawbacks:
When we had an empty database (unstable), libalpm called db_populate after
every pkgcache access, because NULL pkgcache indicated "not loaded" state.
This is not a common case, but the same situation can happen with grpcache,
which is more problematic: If the user had a custom repo with no groups,
grpcache was always NULL. (grpcache is also loaded per database.) Thus
every get_grpcache call induced a load_grpcache operation, so the benefits
of grpcache was completely lost.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch introduces the following function name convention:
_compute_ in function name: the return value must be freed.
_get_ in function name: the return value must not be freed.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The HoldPkg feature is even more important when the packages to be held are
pulled automatically by pacman, in a -Rc and -Rs operation. Before, it only
applied when the packages were explicitly requested by the user to be
removed. This patch extends holdpkg to -Rc and -Rs by doing the HoldPkg
check just before trans_commit.
Additionally, the whole HoldPkg stuff was moved to the front-end.
I changed the default behavior to "don't remove", so I modified remove030.py
pactest as well.
See also: FS#9173.
Original-work-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Aaron said to consider libdownload a dead project so libdownload support was
removed to more easily fix libfetch one (otherwise many ifdef needed).
There was no direct replacement for ferror to detect an error while
downloading. So instead, I added a check at the end to see if the file was
fully downloaded, which is just a small chunk of code taken from here:
http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/net/libfetch/files/fetch.c?only_with_tag=MAIN
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the first step in being able to automatically remove phantom
lock files.
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: fix compilation warnings]
Signed-off-by: Dan McGee <dan@archlinux.org>
Changelogs and install files were getting extracted into the local
db folder before it was manually created. This created issues for
uses with 0077 umasks and was highlighted with the new sudo handling
of umasks (FS#12263).
This moves the local db creation to its own function which is called
before the start of package archive extraction. Also, added a check
that the folder is actually created.
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: rename to _alpm_db_prepare()]
Signed-off-by: Dan McGee <dan@archlinux.org>
Pacman currently logs .pacnew warnings to pacman.log but a similar history
of .pacsave warnings isn't kept. The user should be able to search
pacman.log to discover when and where all .pac* files were created by
pacman.
Addresses FS#12531.
Signed-off-by: Dan McGee <dan@archlinux.org>
May help debug issues we come across with proxy behavior (e.g. those pesky
segfaults) as well as be informative to the user when things aren't working
quite right. Addresses FS#12396.
Signed-off-by: Dan McGee <dan@archlinux.org>
If the delta line doesn't match our regex, we won't go and process it,
possibly walking off the end of the string.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't want a failed write to kill our whole program when we are
downloading things, so set the SIGPIPE handler to ignore when downloading
and restore any previous signal handler when we complete the download.
Signed-off-by: Dan McGee <dan@archlinux.org>
Use libfetch naming in the code in place of libdownload names. This is in
preparation for dropping support for libdownload at some point as libfetch
can run on Linux.
Signed-off-by: Dan McGee <dan@archlinux.org>
From now on -Qu is an "outdated package" filter on local database.
(This is a behaviour change.)
This patch fixes some memleaks and makes the code cleaner, for details see
my comment on FS#7884.
FS#11868 is implemented.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
We never had a call to pclose() in here before, leaving our file descriptor
in some sort of limbo state. In addition, clean up some of the other logic
such as directly calling exit(1) on a popen() failure rather than going to
our cleanup block, and handling and respecting the exit status of the
subprocess correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
It is possible to throw EINTR from a system call such as open(), close(), or
waitpid() if custom signal handlers are set up and they are not initialized
with the SA_RESTART flag. This was noticed by Andreas Radke when ^C (SIGINT)
was given during the call to waitpid(), causing it to throw the EINTR error
and we could not accommodate it.
Simply wrap these calls in a simple loop that allows us to retry the call if
interrupted.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is more consistent with the private functions :
_alpm_db_get_{pkg,grp}cache
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
These two functions now take directly a package list rather than a database.
checkdbconflicts was renamed to checkconflicts.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
* Update all .po files because of the last "-q,--quiet" fix.
Also for some strange reason, en_GB was missing a few c-format tags.
* Finally, delete all unused translations.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch kills one of our hackish pseudo transactions: PRINTURIS.
(The other one is -Sw)
From now on, front-end must not call trans_commit in case of -Sp,
it should print the uris of target packages "by hand" instead.
PRINTURIS flag was removed, NOCONFLICTS flag can be passed to skip
conflict checks.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This function returns with the origin database of a package.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is more rational and coherent with PM_TRANS_EVT_UPGRADE_DONE.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Change the return values to be more informative.
It was previously boolean, only indicating if a sync package was newer than
a local package.
Now it is a simple wrapper to vercmp, handling the force flag.
* Remove the verbose output from _alpm_pkg_compare_versions.
The "force" message is not so useful.
The "package : local (v1) is newer than repo (v2)" message can be moved to
-Su operation.
For the -S operation, it is better to have something like :
"downgrading package from v1 to v2"
* Don't display the "up to date -- skipping" and "up to date -- reinstalling"
messages, when the local version is newer than the sync one.
* Fix the behavior of --needed option to not skip a target when the local
version is newer, and clarify its description.
* Add a new alpm_pkg_has_force function
This allows us to access the pkg->force field like any other package fields.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Probably a tweakable "lockdb-retry" option was planned which is not
implemented. (Now it should be implemented in front-end.)
So now this variable was unused and caused a small memleak.
(FREE(dir) was not reached in case of error.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Due to differences in handling va_list between i686 and x86_64, this bug
can only be seen on x86_64. va_list usage is not allowed but we had been
getting away with it. See
http://lists.opensuse.org/opensuse-programming/2008-02/msg00005.html
for details and explanation.
This fixes FS#11096.
Signed-off-by: Dan McGee <dan@archlinux.org>
When this function got a rewrite in commit f43805d875, argument and variable
names got a bit mixed up when separating the casts from the strcmp
operation. Fix the mixup which also fixes a possible segfault when this
function is called.
Signed-off-by: Dan McGee <dan@archlinux.org>
If a Server specified in pacman.conf had a trailing slash, libalpm ended up
building URLs with double slashes, and this broke libdownload with errors
like the following one :
error: failed retrieving file 'redland-1.0.8-1-i686.pkg.tar.gz'
from 192.168.0.90 : Command okay
So the public function alpm_db_set_server will make sure to remove the
trailing slash of servers. For the private function
_alpm_download_single_file, I only added a comment.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Before commit fc48dc31, file:/// urls forced the use of the internal
downloader (libdownload), because the default XferCommand, wget, does not
handle them. We tried to move away from forcing usage of libdownload, so
this commit implemented the handling of file:/// urls manually. However,
this implementation is way too basic. It does not handle the progress bar,
thus nothing at all appears in pacman's output when a file: repo is
synchronized, or when a file is downloaded from a sync repo. Also, it is not
able to detect when the repo is already up-to-date. When libdownload was
used, both were handled.
It seems better to just drop this implementation for now. All users who use
libdownload will get the much better file:// handling back. For the users of
XferCommand, it will be more problematic, but they have several options:
1) Switch to a downloader handling file:// (wget doesn't, but curl does for
example).
2) Drop the file:// repo, and set up light http or ftp servers instead.
Consider that going that way would make this repo available for the whole
local network, which can be useful.
3) Switch back to libdownload, which works perfectly for many users.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Two recent commits slightly broke the translations, so this fixes all of
them.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#2334.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: add some comments to the code]
Signed-off-by: Dan McGee <dan@archlinux.org>
The pkg_dup function shouldn't call any alpm_pkg_get_ accessors because
this can fill the old package with all INFRQ_DESC fields for example, and
this won't necessarily be reproduced in the new package (for all the fields
that were copied before).
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This vercmp issue has been a sticking point but this should resolve many of
the issues that have come up. Only a few minor code changes were necessary
to get the behavior we desired, and this version appears to beat any other
vercmp rendition on a few more cases added in this commit.
This commit passes all 58 vercmp tests currently out there. Other 'fixes'
still fail on a few tests, namely these ones:
test: ver1: 1.5.a ver2: 1.5 ret: -1 expected: 1
==> FAILURE
test: ver1: 1.5 ver2: 1.5.a ret: 1 expected: -1
==> FAILURE
test: ver1: 1.5-1 ver2: 1.5.b ret: 1 expected: -1
==> FAILURE
test: ver1: 1.5.b ver2: 1.5-1 ret: -1 expected: 1
==> FAILURE
4 of 58 tests failed
Signed-off-by: Dan McGee <dan@archlinux.org>
Debug messages were removed from _alpm_sync_find, because it is a general
purpose function; debug messages should be placed in the caller function.
I inserted "adding package foo-1.0-1 to the transaction targets" debug
message to find_replacements and sync_sysupgrade.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Our STRDUP macro (used in _alpm_depmiss_new) is NULL safe.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
So if you want to remove NULL needle from a list, alpm_list_remove will
return with "not found".
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Before removing a package from target list (in remove_prepare_keep_needed),
we should check whether we have already removed it.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 8240da6cb3 broke some alpm hierarchy
and introduced a new memleak (trans->packages was never freed in case of add
transaction, even if the transaction wasn't committed), so it is reverted
now.
We follow a different approach to reduce memory usage:
_alpm_db_add_pkgincache doesn't duplicate the whole package before adding
it to the cache, only the package name and version (INFRQ_BASE).
This method needs very small extra memory (compared to the reverted method),
and after transaction commit we use less memory than before (since the
big 'files' fields are not copied to cache), this is useful in GUIs.
Note: The old add_pkgincache was a bit broken, since pkg->origin wasn't
filled in correctly.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Acked-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
In case of error some allocated memory wasn't freed in commit_single_pkg.
Note: The return value of this function is not used.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The dynamic pmconflict_t must be freed with _alpm_conflict_free.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Now '-S provision' handling is done in the back-end.
In case of multiple providers, the first one is selected (behavior change:
deleted provision002.py). The old processing order was: literal, group,
provision; the new one: literal, provision, group. This is more rational,
but "pacman -S group" will be slower now. "pacman -S repo/provision" also
works. Provision was generalized to dependencies, so you can resolve deps by
hand: "pacman -S 'bash>2.0'" or "pacman -S 'core/bash>2.0'" etc. This can be
useful in makepkg dependency resolving. The changes were documented in
pacman manual.
alpm_find_pkg_satisfiers and _alpm_find_dep_satisfiers functions were
removed, since they are no longer needed.
I added some verbosity to "select provider instead of literal" and
"fallback to group".
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
I divided resolvedeps into 2 functions. The new _alpm_resolvedep function
will resolve one dependency, for example the 'foo>=1.0-1' dependency. It
can be useful in sync_addtarget refactoring.
The resolvedeps parameters were changed, to be coherent with recursedeps:
* the target-list is an alpm_list* instead of alpm_list**. This is OK,
because alpm_list_add == alpm_list_add_last
* syncpkg param was removed. list contains the to-be-installed packages,
resolvedeps will add the required dependencies into this list
* trans param was removed, it was used in QUESTION() only, which can be used
on the main (handle->trans) transaction only (because the front-end cannot
access our pseudo-transactions at all!).
The patch fixes some wrong dynamic pmdepmissing_t usage.
I did a behavior change (and sync1003.py was modified accordingly), which
needs some explanation: The old resolvedeps didn't elect packages from
'remove' list. I've dropped this because I don't want that 2nd excluding
list param. In fact, in real life, we ~never need this rule. Resolvedeps is
called before checkconflicts, so only -Su's %REPLACES% packages are sitting
in 'remove' list. This means, that we have the replacement packages in our
target list. Usually "foo replaces bar" means, that bar isn't in our repos
any more, so resolvedeps *cannot* elect it; but usually it won't try it at
all, because foo is in the target list, and it is expected to satisfy
'bar>=1.0-1'-like dependencies too. Since checkdeps and checkconflicts is
done after resolvedeps, this cannot cause any harm.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
PM_TRANS_CONV_INSTALL_IGNOREPKG callback function can get 2 params: foo, bar
in this order (packages), bar can be NULL.
Old API:
foo, NULL: Do you want to install foo from IgnorePkg?
foo, bar: foo requires bar from IgnorePkg. Do you want to install bar?
New API:
foo, bar: Do you want to install foo from IgnorePkg? (If bar!=NULL:) bar
requires it.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This function finds the first satisfier package in a pkglist. Using it
instead of _alpm_find_dep_satisfiers eliminates some memleaks and it is
faster. (_alpm_find_dep_satisfiers and _alpm_find_pkg_satisfiers will be
removed soon.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The function is introduced to kill some code duplication. The function name
uses the 'dependency graph' terminology.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a "fix" for FS#10226. I think that multiple versioned dependencies
are quite common now, and the old behavior is quite annoying there. This
patch won't cause any slow-down.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
We were using the stat() system call in quite a few places when we didn't
actually need anything the stat struct returned- we were simply checking for
file existence. access() will be more efficient in those cases.
Before (strace pacman -Ss pacman):
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
33.16 0.005987 0 19016 stat64
After:
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
34.85 0.003863 0 12633 1 access
7.95 0.000881 0 6391 7 stat64
Signed-off-by: Dan McGee <dan@archlinux.org>
Some previous commits apparently broke the get_filename function for package
loaded with pkg_load (on a -Qip operation) because this field was no longer
filled. Now pkg_load fills it.
But the -Qip operation needs to be run like this : -Qip <filename>, so the
filename is already known. There is no need to display it again.
Besides, on a normal -Qi operation, the filename is not displayed either
because this information is not stored in the local database.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Errors like the following one happen regularly (for unknown reasons...) :
error: could not open file /var/lib/pacman/local//glibc-2.7-9/depends: No
such file or directory
Anyway, every time an user reported an error like that, it always seemed
like he thought the error was caused by the double /, which is obviously
wrong.
Since db->path always include a trailing /, there is no need to add one when
concatenating paths in be_files.c or add.c.
Additionally, some static strings were switched to dynamic.
And the computation of the "dbpath"/"pkgname"-"pkgversion" was refactored
in db_read, db_write and db_remove with a get_pkgpath static function.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a new totaldlcb callback function to libalpm and make pacman utilize it
when the TotalDownload option is enabled. This callback function is pretty
simple- it is meant to be called once at the beginning of a "list download"
action, and once at the end (with value 0 to indicate the list has been
finished). The frontend is responsible for keeping track of adding
individual file download amounts to the total xfered amount in order to
display some sort of overall progress.
Signed-off-by: Dan McGee <dan@archlinux.org>
We have been using unsigned long as a file size type for a while, which
works but isn't quite correct and could easily break. Worse was probably our
use of int in the download callback functions, which could be restrictive
for packages > 2GB in size.
Switch all file size variables to use off_t, which is the preferred type for
file sizes. Note that at least on Linux, all applications compiled against
libalpm must now be sure to use large file support, where _FILE_OFFSET_BITS
is defined to be 64 or there will be some weird issues that crop up.
Signed-off-by: Dan McGee <dan@archlinux.org>
This was mistakenly referencing the LGPL even after the XySSL code bump, so
fix the license clause to be correct.
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 8428367285 introduced the regression,
and a previous commit introduced the vercmptest.sh test script to track down
these issues. This commit solves the problem by removing the previous
attempt at locating the pkgrel portions and replacing it with something that
performs the correct logic.
While tracking down everything I needed to, I also found a mistake in one of
the pactests which is fixed here as well as increased the functionality and
verbosity of the vercmptest script to both print out each test it is running
as well as automatically run the mirror of each test case.
Signed-off-by: Dan McGee <dan@archlinux.org>
Removed unused handle->uid from pmhandle_t. The need to check permissions
should be determined by the frontend (and is in pacman).
Fixed comment on noextract in pmhandle_t.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This event was unused, was missing the equivalent EXTRACT_DONE event, and
was useless because we already have ADD / UPGRADE START and DONE events.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
repo-add and db_read both assume that REPLACES and FORCE fields are in the
desc file, so do that for db_write as well (instead of depends file).
Note that db_write is currently only used on the local database. And the
only purpose of replaces and force in local database is for information
purpose (available on -Qi operations). So this is not a big problem.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-May/011859.html
Acked-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Name and version are computed from "/var/lib/pacman/..." pathname. And the
%NAME% and %VERSION% fields from the desc file were not even read. So now,
when we read the desc file, we make sure the %NAME% and %VERSION% fields are
consistent.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
In the case of -Rs operation, first pulling the dependencies with
recursedeps before calling checkdeps takes care of the dependency chain of
remove052 pactest.
In the case of -Rcs, we can keep the old behavior because we have no problem
there (any dependency returned by checkdeps will be added to the remove list
because of -Rc) and we have to run recursedeps on the final remove list
anyway to catch all orphans.
Ref.: http://www.archlinux.org/pipermail/pacman-dev/2008-April/011569.html
Signed-off-by: Nagy Gabor <ngaba at bibl.u-szeged.hu>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Actually, just rename _alpm_versioncmp to alpm_pkg_vercmp and get rid of the
need for a wrapper since it did nothing anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
This code hasn't been looked at in some time. I grabbed a more recent
version of the RPM source (4.4.2.3) and attempted to sync up any changes
they have made, as well as make the libalpm additional code much cleaner and
limited to only a few added lines of code.
The size of this patch might make you think we added code, but bloat-o-meter
actually tells us otherwise:
<function> <old> <new> <diff>
_alpm_versioncmp 1485 1021 -464
Signed-off-by: Dan McGee <dan@archlinux.org>
Any real call of this function doesn't specify a name or version ahead of
time, so just kill that functionality off. Now to remove those dummy
packages...
Signed-off-by: Dan McGee <dan@archlinux.org>
If we have a package without name and/or version, we are really out of luck.
Speed these functions up by removing unnecessary code. Note that both the
splitname and pkg_load functions, where the name and version of packages are
initially populated for databases and pkg.tar.gz files respectively, enforce
that every new package struct created has a name and version.
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 0460038447 caused a regression when
rereading the pkgcache after updating the on-disk databases. A rewinddir
call was errantly removed.
Instead of replacing the call to rewindir, clean up this whole mess.
db_scan is used only once and with target == NULL so there was actually half
the code of db_scan which was unused. This is gone now and replaced by a
single new db_populate function.
Dan: add_sorted ended up being 3x slower than one msort at the end, so I
changed back to that. I also made one pointer variable const and merged this
whole patch with my original fix for the rewinddir issue.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This has been around since at least pacman 2.9.8. Frugalware just dumped it
in commit 113ec73bfcfdc, and deleting it here and running pactest shows that
nothing that we have actually tested changes. If someone can pactest the
edge case where this is needed, then show me the money.
Signed-off-by: Dan McGee <dan@archlinux.org>
* remove obsolete and unused *_cmp helper functions like deppkg_cmp and
_alpm_grp_cmp
* new alpm_list_remove_str function, used 6 times in handle.c
* remove _alpm_prov_cmp / _alpm_db_whatprovides and replace them by
a more general alpm_find_pkg_satisfiers with a cleaner implementation.
before: alpm_db_whatprovides(db, targ)
after: alpm_find_pkg_satisfiers(alpm_db_getpkgcache(db), targ)
* remove satisfycmp and replace alpm_list_find + satisfycmp usage by
_alpm_find_dep_satisfiers.
before : alpm_list_find(_alpm_db_get_pkgcache(db), dep, satisfycmp)
after : _alpm_find_dep_satisfiers(_alpm_db_get_pkgcache(db), dep)
* remove _alpm_pkgname_pkg_cmp, which was used with alpm_list_remove, and
use _alpm_pkg_find + alpm_list_remove with _alpm_pkg_cmp instead.
This commit actually get rids of all complicated and asymmetric _cmp
functions. I first thought these functions were worth it, be caused it
allowed us to reuse list_find and list_remove. But this was at the detriment
of the clarity and also the ease of use of these functions, dangerous
because of their asymmetricity.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Now the syntax is coherent with alpm_list_find and alpm_sync_find.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm_pkg_load() and parse_descfile() are specific to getting information
from package files, just as other code is specific to getting information
into or out of a package database. Move this code out of package.c, which
should eventually only contain operators on the pmpkg_t struct that do not
depend at all on where the data came from.
Signed-off-by: Dan McGee <dan@archlinux.org>
We have some useless abstractions like an alpm_db_rewind function. I've read
somewhere that readdir() was the worst filesystem function call invented,
and what do we do? Add a wrapper around it. Kill this abstraction and move
some other things into be_files that should be there anyway because they
are so tied to how a files backend works.
Signed-off-by: Dan McGee <dan@archlinux.org>
It was unclear what "loading the full package" actually did. The
detailed description should clear that up, without having to look at the
code.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The start of a few commits to remove some PATH_MAX usage from our code. Use
a dynamically allocated string instead.
Signed-off-by: Dan McGee <dan@archlinux.org>
We only need a copy of this string once we know we are going to extract it,
and we don't need a static buffer to copy it into since it is coming from a
known-length string.
Signed-off-by: Dan McGee <dan@archlinux.org>
XySSL 0.9 was released; sync our code with the upstream source. Note that
there weren't any real changes besides renaming of macros, so nothing much
to see here.
The biggest change may be the licence- it is now GPL/BSD software rather
than LGPL/BSD. The license header is changed to reflect this.
Signed-off-by: Dan McGee <dan@archlinux.org>
It is hard to decipher what the transaction events actually notify you
of, and what parameters are passed to the callback function, without
looking at the code. This patch adds documentation for the _pmtransevt_t
enum in order to clarify what the event is for and what data is passed
when the callback is called.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Rework to use a single #define for the buffsize, and in the process clean up
some other code and double the default buffer size.
Signed-off-by: Dan McGee <dan@archlinux.org>
We were a bit juryrigged using one call to mkstemp() before rather than
extracting the new files side-by-side and doing our comparisons there. We
were also facing some permissions issues. Instead, make our life easier by
extracting all temp files to a '.paccheck' extension, doing our md5
comparisons, and then taking the correct actions.
Still to be done here- a cleanup of the use of PATH_MAX which should not be
necessary if we use dynamic allocation on the heap.
Signed-off-by: Dan McGee <dan@archlinux.org>
I'm not sure why these were ever here, as by this point we have already
extracted the file meaning a call to this function is basically a no-op.
Signed-off-by: Dan McGee <dan@archlinux.org>
We removed one too many FREELIST() calls when trying to fix some memleaks,
and add a safety/sanity check to ensure filename is set, as packages in old
DBs are likely to not have this field.
Signed-off-by: Dan McGee <dan@archlinux.org>
Reference : FS#9547.
The get_filename function first tries to get the filename field from the
database, and if it doesn't find it, it tries to guess it based on the name,
version and arch.
This field was introduced in 3.0, but there are still many old entries in
the official databases without it. So the databases need to be regenerated
first before this patch can be applied.
There is a second problem with the delta code, which needs the filename for
locally installed packages too, but this field is not present in the local
db. So the delta code needs to be fixed first.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
As Nathan noticed, the new informations in the delta struct allows us to
get rid of this list :
http://www.archlinux.org/pipermail/pacman-dev/2008-February/011163.html
So I rewrote apply_deltas for that. The previous apply_deltas also had a
limitation: it assumed that the initial package and the deltas were in the
first cache dir, which is not necessarily the case. That situation is
supported now.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Using the graph structures that Nagy set up for dependency sorting, we now
do a similar process for deltas. Load up all of the deltas into a graph
object on which we can then apply Dijkstra's algorithm, using the new weight
field of graph struct.
We initialize the nodes weight using the base files that we can use in our
filecache (both filename and md5sum must match). The algorithm then picks
the best path among those that can be resolved.
Note that this algorithm has a few advantages over the old one:
1. It is completely file agnostic. These delta chains do not have to consist
of package files- this could be adopted to do delta-fied DBs.
2. It does not use the local_db anymore, or even care if a package or file
is currently installed. Instead, it only looks in the filecache for files
and packages that match delta chain entries.
Original-work-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Start to move the delta struct away from an assumed package name scheme and
towards something that is package (or even filename) agnostic. This will
allow us much greater flexibility in the usage of deltas (maybe even sync
DBs some day) as well as allowing code outside of delta.h/delta.c to be much
cleaner with less of a need for snprintf() calls.
Signed-off-by: Dan McGee <dan@archlinux.org>
In the can_remove_package function, we don't need to compute the whole
requiredby list, we just need to find one member of it that doesn't belong
to the targets list.
That way we get a small speedup and remove the only usage of
alpm_pkg_compute_requiredby in the backend, so that it can be tweaked for
frontend usage.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This should remove the need for any additional patching to run on platforms
that have libfetch available but not libdownload. It isn't the prettiest,
but we have kept our libdownload impact down to just a few files, so it can
be easily done.
Signed-off-by: Dan McGee <dan@archlinux.org>
free() is designed to do nothing if it is passed a NULL pointer, so there is
no need to check for it on our end. Change/fix the macro.
Signed-off-by: Dan McGee <dan@archlinux.org>
Darwin's binary format does support symbols with differing visibilities, but
it does not support the protected or internal visibilities- only hidden. For
Darwin only, we should fall back to this visibility to prevent warnings from
the compiler and because it is close enough for our library purposes.
See http://gcc.gnu.org/viewcvs/*checkout*/trunk/gcc/config/darwin.c, search
for the "darwin_assemble_visibility" function for more details.
Also add pacman.static.exe to gitignore.
Signed-off-by: Dan McGee <dan@archlinux.org>
Linux includes all the gettext stuff in glibc, so there is no need for the
libintl links which we failed to include in our linker variables. Update the
makefiles which should enable NLS support on all platforms, including OS X
and Cygwin.
Signed-off-by: Dan McGee <dan@archlinux.org>
Things must have gotten stricter with GCC 4.3 on the '%zd' printf string and
this is the first I've tried to compile there. Fix the problem by using
size_t instead of int.
Signed-off-by: Dan McGee <dan@archlinux.org>
Pulled two loops out of _alpm_remove_prepare and gave them their own
functions.
Signed-off-by: K. Piche <kevin@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We no longer expose any of libdownload in our public functions, so no need
to include this header anymore.
Signed-off-by: Dan McGee <dan@archlinux.org>
There were a few issues with this code:
1. We already had an open fd to a file, but never used it to our benefit.
Use the libarchive convienence method to write the current file contents
straight to a file descriptor.
2. The real problem cropped up on Windows where the locking semantics caused
the old way of extraction to fail because we had an open file descriptor.
By using the file descriptor and closing it ASAP, we prevent these
failures.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a new --disable-internal-download flag to configure allowing the
internal download code to be skipped. This will be helpful on platforms that
currently don't support either libdownload or libfetch (such as Cygwin) and
for just compiling a lighter weight pacman binary.
This was made really easy by our recent refactoring of the download code
into separate internal and external functions, as well as some error code
cleanup.
Signed-off-by: Dan McGee <dan@archlinux.org>
We correctly closed the logfile stream when recalling set_logfile, but did
not NULL out the dead pointer once we did this. Fix the problem which was
the cause of FS#10056.
Signed-off-by: Dan McGee <dan@archlinux.org>
After the libarchive upgrade from 2.4.12 to 2.4.14, our usage of
archive_entry_pathname became dangerous. We were using the result of that
function even after calls to archive_entry_set_pathname.
With 2.4.14, the entryname becomes wrong after these calls, and so all the
future use of entryname are bogus. entryname is used quite a lot for
logging, so that's not so bad. But it's also used for the backup handling,
so that's not very cool. For example, reinstalling a package with backup
entries will erase all the md5 entries from the DB, because they won't be
found back.
entryname is now a static string so that we can easily keep the result of
archive_entry_pathname.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: fixed version numbers in commit message]
Signed-off-by: Dan McGee <dan@archlinux.org>
This should be a notable speed-up (apart from kernel cache).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
With the addition of the archive_fgets() function, we can now skip the temp
file usage in pkg_load/parse_descfile that was not needed. This has a nice
benefit of probably being both faster, reducing code, and getting rid of
"expensive" file operations.
Signed-off-by: Dan McGee <dan@archlinux.org>
This crude function allows reading from an archive on a line-by-line basis
similar to the familiar fgets() call on a FILE stream. This is the first
step in being able to read DB entries straight from an archive.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch should avoid duplicated target names in the backend.
1. sync_loadtarget will return with PM_ERR_TRANS_DUP_TARGET when trying to
add a duplicated target
2. sysupgrade never pulls duplicated targets
3. resolvedeps won't pull duplicated targets anymore
A pulled list was introduced in sync_prepare to improve the
pmsyncpkg_t<->pmpkg_t list conversion by making it more direct.
Also replace sync1005 and sync1006 by the sync1008 pactest, which is
similar but more interesting (the provisions are dependencies instead of
explicit targets).
sync1005 didn't work as expected anyway. It was expecting that pacman
failed, and pacman indeed failed, but not for the good reason. It didn't
fail during the preparation step because of conflicting targets, but during
the commit step, because of a md5 error...
And sync1006 didn't pass and was not really worth fixing. We have already
enough failing pactests more important than these two.
sync1008 pass with this patch.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
In the file:// download case, we didn't free the return from get_destfile()
after we were done with it. Fix it. (Found with xfercommand001.py)
Signed-off-by: Dan McGee <dan@archlinux.org>
The _alpm_backup_split function always alloced memory for the fname, and we
let it disappear in a specific case (upgrade026.py). Fix the issue.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will reduce the need for running an -Syy if the DB was only
half-extracted, as the mtime won't get updated until the new database is
completely in place.
Signed-off-by: Dan McGee <dan@archlinux.org>
* -Rss removes all dependencies (including explicitly installed ones).
* updated documentation
* two pactest files added to test the difference between -Rs and -Rss
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Its implementation was quite broken:
* add_loadtarget() might have silently filtered out some targets when
replacing an older version.
* This was used in sync.c to determine whether a target is implicit or not,
which is incorrect behavior. Before this patch we silently removed user
confirmed replacements; now we always warn on a replacement.
* remove001.py behavior was quite odd in adding same target 5 times to the
target list, we can change this behavior to be a failure.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xav: changed remove001 pactest accordingly]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: rewrote commit message]
Signed-off-by: Dan McGee <dan@archlinux.org>
This should be the main step in the download refactoring initiated by commit
81a2a06818.
The stub functions introduced by that commit were implemented.
The big download code was mostly composed of two steps, and so it has been
naturally splitted in two functions : download_external and download_internal
file:/// urls are now handled manually, instead of forcing the use of the
internal downloader.
Thanks to Dan for fixing the remaining issues and cleaning up the patch :)
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Now pacman frontend uses this function instead of the compile-time libalpm
version number.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: fix one more spot where LIB_VERSION was used]
Signed-off-by: Dan McGee <dan@archlinux.org>
(cherry picked from commit 49197b7492)
This comment was created for the old provision version format and needless.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Hopefully the last of the huge commits ever. This also adds the c-format tag
to all of the translated messages.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add the --no-location xgettext option to disable the line numbers. They are
not very useful, and generate a huge number of pointless line changes on
every update.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011332.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
The issue was discussed in this thread on the mailing list:
http://archlinux.org/pipermail/pacman-dev/2008-March/011324.html
In addition, the GNU gettext manual states that translation encoding is
completely separate from the encoding used by the users of the translation.
It makes sense for our project to use UTF-8 for all translations, regardless
of the preferred encoding used by users of a certain language. This allows
all contributors to more easily edit a translation file if necessary and not
have to worry about codepage issues.
Signed-off-by: Dan McGee <dan@archlinux.org>
Now pacman frontend uses this function instead of the compile-time libalpm
version number.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: fix one more spot where LIB_VERSION was used]
Signed-off-by: Dan McGee <dan@archlinux.org>
test_delta_md5sum and test_pkg_md5sum were simple wrappers to test_md5sum,
and only used once, so not very useful. I removed them.
Also, test_md5sum and alpm_pkg_checkmd5sum functions were a bit duplicated,
so I refactored them with a new _alpm_test_md5sum function in libalpm/util.c
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
I screwed up originally when I accepted the TotalDownload patch,
8ec27835f4. I didn't realize how deeply it
modified libalpm and I probably shouldn't have let it do what it did. This
commit reverts much of what that patch added in order to clean up our
internal function calls. We can find another way to do it right down the
road here but for now it has to go.
Signed-off-by: Dan McGee <dan@archlinux.org>
Using c-format on every strings allowed me two found two broken ones.
One was harmless, but the other caused a segfault, as reported in FS#9658.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Currently xgettext apparently attempts to autodetect c format strings (eg a
string with a %s) to decide whether to use c-format flag or not.
If we use --flag=_:1:c-format instead of --flag=_:1:pass-c-format, the
c-format will be applied everywhere.
I couldn't find this documented anywhere though. But the pass prefix is
mentioned here :
http://www.gnu.org/software/gettext/manual/html_node/xgettext-Invocation.html#xgettext-Invocation
"Specifies additional flags for strings occurring as part of the argth
argument of the function word. The possible flags are the possible format
string indicators, such as ‘c-format’, and their negations, such as
‘no-c-format’, possibly prefixed with ‘pass-’."
And c-format is documented there :
http://www.gnu.org/software/gettext/manual/html_node/c_002dformat-Flag.html#c_002dformat-Flag
"This situation happens quite often. The printf function is often called
with strings which do not contain a format specifier. Of course one would
normally use fputs but it does happen. In this case xgettext does not
recognize this as a format string but what happens if the translation
introduces a valid format specifier? The printf function will try to access
one of the parameters but none exists because the original code does not
pass any parameters."
And that's exactly what happened with FS#9658.
So using c-format for every string will prevent this issue from happening
again.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Remove what was a pretty weird abstraction in the libalpm backend. Instead
of parsing server URLs as we get them (of which we don't usually use more
than a handful anyway), wait until they are actually used, which allows us
to store them as a simple string list instead. This allows us to remove a
lot of code, and will greatly simplify the continuing refactoring of the
download code.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add new stub functions that work by calling the existing (terrible) download
forreal function, which needs a serious overhaul. Hide the existing
functions and switch all former users to the new functions.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the first in what will be a series of patches to clean up the
current download code in libalpm. Start by moving download code out of
server.c and into download.c.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Remove some #include statements that are not strictly necessary
* Remove node_new function that is really just a one-liner
Signed-off-by: Dan McGee <dan@archlinux.org>
* Introduces 'list == NULL' convention for empty list. That means
alpm_list_new isn't needed anymore, so kill it
* Small straightforward fixes in alpm_list.c
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This will allow us to utilize this helpful type and functions in places
besides dependency calculations. In addition, remove the public declaration
of pmgraph_t in alpm.h- there is zero need to expose this internal type.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the first step of fixing FS#9547. This should not break any existing
code that may rely on this function behaving the way it did, and should be
good for inclusion in a maint release.
In addition, update pactest so it fills the FILENAME field in the DB entries
it creates so we can move forward with a real fix to this issue.
Signed-off-by: Dan McGee <dan@archlinux.org>
For our Czech, Polish, and Russian translations, they do not need to be at
the more specific 'lang_COUNTRY' code, but can live at just plain 'lang'.
This follows the pattern of most other translated programs out there as
Roman pointed out on IRC.
ru_RU: 2 (pacman and libalpm)
ru: 128 for him, 131 for me (everything else)
Signed-off-by: Dan McGee <dan@archlinux.org>
If the end of the pB list was reached before the end of pA, we failed to
read any remaining files from the pA list. Add an additional loop to ensure
all entries of pA are added to the return list regardless of whether we have
reached the end of pB.
This new loop also eliminates the now-unnecessary check for a null pB, as we
need to ensure we are excluding directories in the resulting output anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
sync->newversion shouldn't be public at all, and internally we access it directly.
(Before pmsyncpkg_t clean-up the analogue of this field [type] was needed in replaces computation.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This patch indroduces a new public alpm_sync_newversion, which scans for new
version of a package in sync repos.
Hopefully this will reduce code duplication in the future:
* check-for-pacman-new-version from front-end can be easier
* -Qu refactoring
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Fixes FS#9235.
We already had the following case in extract_single_file :
/* cases 1,2,3: couldn't stat an existing file, skip all backup checks */
But we actually only did a lstat here. And if lstat worked, we did a stat
without checking.
When lstat works and stat fails, it means we have a broken symlink, like in
FS#9235. We can actually treat this case like a non-existing file.
The broken symlink will then be simply overwritten.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
_alpm_pkgname_pkg_cmp(pkgname, pkg) returns true iff pkg's name is pkgname.
This is useful if you want to remove a package from pmpkg_t* list, and you
want to search for package name.
This allows cleaning the -Ru code a bit, by removing the need of a dummy
pkg.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
With --unneeded option 'pacman -R' doesn't stop in case of dependency error;
it removes the needed-dependency targets from the target-list instead. See
also: http://archlinux.org/pipermail/pacman-dev/2007-October/009653.html .
The patch also adds a new causingpkg field to pmdepmissing_t which indicates
the to-be-removed package which would cause a dependency break. This is
needed, because miss->depend.name may be a provision. miss->causingpkg will
be useful in -R dependency error messages too.
[Xavier: renamed inducer to causingpkg, removed the _alpm_pkgname_pkg_cmp
helper function as requested by Aaron. This might be added by a further
commit. Other small cleanups, updated manpage and bash completion.]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Fix for sync044.py and reason001.py.
Rename sync->data to sync->removes (alpm_list_t *)
Replace pmsynctype_t sync->type by pmpkgreason_t sync->newreason
The type field was set to UPGRADE or DEPEND or REPLACE.
Instead of using type = UPGRADE or DEPEND, we now rather use a
"pmpkgreason_t newreason" field directly (= explicit or depend) which allows
a better handling of the install reason.
And the REPLACE type is now deduced implicitly when the sync->removes list
is not empty.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* eliminate asymmetry (innerconflict vs. outerconflict)
* fix a memleak (in case of PM_ERR_MEMORY deps wasn't freed)
* fix wrong pmconflict_t duplication (*retconflict = *conflict)
Note: the new code introduces some code duplication which shall disappear by
fixing FS#7524.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove unnecessary synclist_free function, and use our standard way
(alpm_list_free_inner + alpm_list_free) instead.
This slightly reduces code duplication.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The original patch from Nagy tried to resolve target vs target conflicts,
and so broke the following pactests : sync040, sync041 and sync990
Nagy's proposal to solve this situation was to choose the interactive way,
ask the user how to deal with it: either remove pkg1 or remove pkg2 or stop
here. So he left this as a TODO.
But instead of trying to resolve these conflicts or asking the user, I
tried to find a more conservative way, looking at what the current pactests
expected:
If between the two conflicting packages, one provides the other, pacman
will keep that one and remove the other from the target list. That breaks
sync893 and sync897. But Dan agreed these two looked weird and should be
changed.
This commit should close FS#8897, FS#8899 and FS#9024.
Reference:
http://www.archlinux.org/pipermail/pacman-dev/2007-October/009745.htmlhttp://www.archlinux.org/pipermail/pacman-dev/2007-December/010393.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The mixup causes a fail in the build using --enable-debug on x86_64 but not
i686, so none of us caught this right away. Fix it. FS#9297.
Signed-off-by: Dan McGee <dan@archlinux.org>
Edit _alpm_db_add_pkgincache to not duplicate packages, because this is not
needed, is slower, and uses more memory. This made the max memory usage
during base reinstall go from 10.4MB to 9.7MB.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This function has a limited purpose, but might be interesting to do a
sanity check from a frontend (eg testdb).
Also removed the private _alpm_checkconflicts function to avoid confusion.
This function was used only once in libalpm, in sync.c, and was just a
single line anyway. Having to do it manually makes it explicit that we are
looking for two kind of conflicts (targ vs targ and db vs targ).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We have a debug message in the target vs. target file conflict check, and
this is a bit rediculous when it comes to watching output from something
like smoke001.py. Instead, put the output outside this inner loop so we only
see it at most once per target, which is much more reasonable.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the symmetric of --asdeps, install packages explicitly.
Documentation and completion files were updated accordingly.
Added sync301.py and upgrade032.py pactest files to test this.
I also made a little modification in ALLDEPS handling too.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
The deptest code (pacman -T) used by makepkg was mostly in the frontend.
There were 2 drawbacks:
1) the public splitdep function returns a pmdepend_t struct, but the
_alpm_dep_free function for freeing it is private. So there was a memleak.
2) there is a helper in the backend (satisfycmp in deps.c) which makes this
function much easier.
So this adds a new public alpm_deptest in libalpm/deps.c, which cleans
pacman_deptest in pacman/deptest.c a lot.
Besides, alpm_splitdep was made private, because the frontend no longer
requires it, and _alpm_dep_free is also private.
Finally the deptest001 pactest was extended.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Another elimination of a static length structure in libalpm. Should result
in a little more memory saved during execution of packages with lots of
deltas attached.
Signed-off-by: Dan McGee <dan@archlinux.org>
We are in string freeze for the 3.1.1 release. This commit updates all the
message files to the latest code, and all translation updates should be
based off of these po-files. Please attempt to keep the line number changes
to a minimum- there should be no reason to update these po files with just
new line numbers. That way we can more easily see exactly which translations
were updated.
Signed-off-by: Dan McGee <dan@archlinux.org>
Change the 'provname provver' format to 'provname=provver'.
In .PKGINFO, the provisions are copied from the PKGBUILD without quotes. So
the provision version was actually handled as a different provision...
See FS#9171.
Dan: Unfortunately we have to change our original specification for
versioned provisions with this patch, but it ends up being the simpler and
cleaner solution in the long run, and if there is any time to change it the
time is now before many packages have been built. Keeping the ' ' based
format would have required us to do special parsing in repo-add, as well as
being susceptible to users not using quotes in their provides array.
Hopefully this will resolve the issues we had with our initial plan. Sorry
for the confusion.
Acked-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fix for FS#9176.
A previous commit (6e8daa553b) already forced all database files to 644.
Now the directories are also forced to 755.
Additionally, repo-add now sets the umask to 022, just like makepkg does, to
fix the problem at its root.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
For example, if the cachedir is a broken symlink or a non writable
directory, pacman fallbacks to /tmp/. Just before doing that, it freed the
handle->cachedirs list twice !
once in _alpm_filecache_setup, and once in alpm_option_set_cachedirs. So the
first one was removed.
Fixes FS#9186.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Packages put in the sync->data field were always duplicated with pkg_dup,
and then freed, This is not needed.
Killing this duplication of packages made the memory usage during base
reinstall go from 10.4 MB to 8.1 MB.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
In the old code 'alpm_list_diff(_alpm_db_get_pkgcache(db), dblist,
_alpm_pkg_cmp);' was slow.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xav: In my opinion, computing both dblist and modified in one for loop also makes
the code clearer, besides being more efficient.
Also renamed joined to targets since I also find that clearer.]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
We didn't have a free function before, causing some memory leaks. We also
need a dup function now that strings are not in the structure but are
dynamically allocated.
Also adapt pmdepmissing_t to use a pointer to a depend struct instead of an
inclusive one so we can use the functions we created here.
Signed-off-by: Dan McGee <dan@archlinux.org>
Moves "checking dependencies..." notification into code block where
dependency checking is performed to stop spurious notification.
Reference: http://archlinux.org/pipermail/pacman-dev/2008-January/010714.html
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Two functions defined in alpm.h were not marked with SYMEXPORT, causing
linking errors if they were used.
In addition, remove the incorrect use of the 'alpm_' prefix from an internal
function and replace it with '_alpm_'.
Fixes FS#9155.
Signed-off-by: Dan McGee <dan@archlinux.org>
This also affects all structures with static strings, such as depmiss,
conflict, etc. This should help a lot with memory usage, and hopefully make
things a bit more "idiot proof".
Currently our pactest pass/fail rate is identical before and after this
patch. This is not to say it is a perfect patch- I have yet to pull valgrind
out. However, this should be quite safe to use in all situations from here
on out, and we can start plugging the memleaks.
Original-work-by: Aaron Griffin <aaronmgriffin@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This reverts commit e28973169d.
This code might fit better in the frontend than in the backend finally.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2007-November/010150.html
I also changed it for fixing FS#8763 :
if there is exactly one provider, pacman will pull it and print a warning.
if there are several providers, pacman will list them and fail. It's up to
the user to pick one. Add sync501 pactest to reflect that.
It wasn't even implemented correctly, and it really doesn't have a use if
packagers just do their job correctly anyway for a distro. Let's not try to
solve a problem with the wrong solution now.
Signed-off-by: Dan McGee <dan@archlinux.org>
We had an unused date element in the pmpkg_t struct (not builddate or
installdate). Kill it off and fix the one function that was using it.
Signed-off-by: Dan McGee <dan@archlinux.org>
The previous fileconflict check (package vs filesystem) skipped the conflict
when the file on the filesystem was a directory or a symlink to a directory,
no matter what the file in the package was.
Now, the conflict will only be skipped if the file in the package is a
directory (so compatible with a dir or a dir symlink on the filesystem).
So in the case of 8156 (new fileconflict003 pactest for this case), instead
of silently ignoring the extraction of the test symlink, pacman will now
fail because of a file conflict between the test symlink in the pkg2 package
and the test directory on the filesystem.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
By attempting to stat the cachedir when we load the pacman config, pacman
bails out if it is a non-existant directory, even if it will never be
needed. This is unfortunate as it is only used for sync transactions anyway.
Instead, wait until we need it in _alpm_filecache_setup to actually do
anything.
Reported as FS#9096.
Signed-off-by: Dan McGee <dan@archlinux.org>
Originally noticed in FS#9024, but was fixed in previous changes anyway.
However, it doesn't hurt to still check it.
Also add a pactest from Chantry Xavier for the original problem to ensure
we can't reproduce it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Thanks to the proactive backup handling, we don't need to add the moving
file to the skip_add list.
The backup handling will make sure nothing gets overwritten.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2007-December/010610.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This was the case of the bash packaging error where a file was removed from
the package but not the backup array.
I just added a sanity check so that only the files from the backup array
that are also in the filelist are used.
I had to edit upgrade026 pactest slightly : it required the file to be
copied to .pacsave instead of moved. But just moving it should be enough, as
we agreed on the ML :
http://www.archlinux.org/pipermail/pacman-dev/2007-December/010440.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
These used FUNCTION output level and not DEBUG, so I didn't catch them way
back when I removed those gettext calls. Remove them now (which exposed a
nice little memory access error elsewhere in the code). This should have a
slight speedup effect on the code too as we no longer have to make the
gettext call even when these messages aren't printed.
Signed-off-by: Dan McGee <dan@archlinux.org>
Ugh, it was a pain to figure out why the Total Removed Size was showing up
wrong in the output of removed packages, but this was why- we used a stupid
_alpm_pkg_new call instead of just duping the package. Fix this. In the long
run, we really need to figure out better ways to not duplicate all this
package information.
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds a pactest for the relocation of a config file between two packages
(case of etc/profile moving from bash to filesystem).
While running this pactest, I found out that chk_filedifference didn't work
correctly with an empty list as second argument. So that's fixed now.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2007-December/010610.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is something pacman can do on its own straight from the archive, and we
will reduce the chance of problems occurring becuase of inproper FILELIST
generation as we have had in the past with special characters in filenames.
Once we remove it from makepkg. we can remove any usage of it from all of
our other tools, including pacman, pactest, and contrib/ utilities.
Note that removing it from pacman uncovered a few other bugs anyway, so this
was probably a good move.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the bash case when the /etc/profile file was removed by error from
the package, but stayed in the backup array.
Ref:
http://www.archlinux.org/pipermail/arch-dev-public/2007-December/003556.html
Also fixed a little typo in add.c, but it's disabled code.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
As I mentioned earlier on the ML :
http://www.archlinux.org/pipermail/pacman-dev/2007-December/010416.html
the first part of commit 843d368ef6 had no effect because of a bug.
So I fixed the bug, but since this would change backup handling behavior,
and possibly require other bigger changes to work right, I decided to just
disable that part temporarily, and left a TODO in the code.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#7380: alpm crashes on passing NULL to alpm_trans_commit in
a sync operation. Adds check that data parameter is not NULL in
several functions.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
[Dan: fix whitespace]
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow someone to install a group but ignore individual
packages inside the group.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
It is possible for the if statement to never succeed, causing path to
never be freed. It is also possible for the if statement to succeed more
than once per loop, which could have caused a segfault.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
It's probably far from perfect, but at least I tried to translate
everything.
I noticed a missing newline at libalpm/trans.c , line 573 :
_alpm_log(PM_LOG_ERROR, _("call to popen failed (%s)"),
I don't think it's possible to fix it now (string freeze?), so I didn't.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
You can use foo<2.0 and foo>2.0 as depend
add046.py and add047.py pactests were added to check this
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Updated libalpm translation
* Regenerated hu.po files, because the 'call-for-translators version' was outdated
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
If /tmp was full during the early stages of package extraction, we were
unable to extract the package description file with the call to
archive_read_data_into_fd(archive, fd) becuase we never checked the return
code. Add a check to ensure the extraction was successful and print and
return an error if it was not instead of falling through to a possibly
untrue error message.
This should fix FS #8885.
Signed-off-by: Dan McGee <dan@archlinux.org>
I appears that when chrooted, the /bin/sh used by popen is that of the parent
process. This is true until the process forks once chrooted, which we do not
want to do.
As such, this actually makes things nicer. We don't need a /bin/sh in a chroot
to run install scriptlets, and don't need to check for it in the root directory
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The new pattern is as follows:
. /path/to/scriptlet
post_upgrade X Y
This requires less frameworking in the install scripts (the three lines that
shift and eval a function are nasty)
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Update the GPL boilerplate to direct people to the GNU website for a copy of
the license, as well as bump all of Judd's copyrights to 2007.
Signed-off-by: Dan McGee <dan@archlinux.org>
Thanks to Allan for inspiring all this work on what was one little TODO item
in the codebase. :)
Change changelog handling so we can now dump a changelog from both installed
packages and package files (fixes FS#7371). We do this by moving all of the
machinery to the backend where it should have been in the first place.
The changelog reading is now done through a open/read/close interface
similar to the fopen/fread/fclose functions (can you guess how it is done?).
It is buffered by the frontend, so programs using the library can read as
much or as little as they want at a time.
Unfortunately, I could not implement a changelog_feof function due to some
shortcomings of libarchive. However, I left the stub code in there,
commented out, in case it becomes possible later or anyone wants to take a
stab at it.
Original-work-by: Allan McRae <mcrae_allan@hotmail.com>
Improved-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
If _alpm_unpack has a specific file to extract (not NULL), but doesn't find
it, it'll now return 1, for indicating the failure.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The alpm_list_free(complete) needs to be done OUTSIDE the loop walking
through the server list.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Now alpm_checkdeps first search for literals, then search for no-literal satisfiers
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: fix spelling of INTALL, fix line wrapping]
Signed-off-by: Dan McGee <dan@archlinux.org>
Update all of the pot and po files with the latest messages available.
Translators- you are encouraged to do this as well every time you update the
translation, and the directions in 'translation-help' should help. Also feel
free to delete all the old translations that end up at the bottom of these
files and only clutter things up.
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm_list_find and alpm_list_find_ptr will now return a void *, and
alpm_list_find_str will return a char *, instead of an int.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
I started playing around with gcov today and it showed a few places in the
code that we don't test at all. This is the start of ensuring that we
execute most of the code in our codebase.
Signed-off-by: Dan McGee <dan@archlinux.org>
During a pacman operation such as a group install, pacman can ask several
questions such as "local version is up to date. Upgrade anyway?". They are
usually all answered either by yes or by no:
* yes when you want to reinstall all the targets.
* no when you only want to install the missing ones (either because you are
installing a group, or because you are copying a pacman -S line from wiki or
whatever).
So instead of asking this question for each target, it is now now configured
with a flag. Yes will be the default -S behavior, No will be achieved with
the --needed flag.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* memleak found by Nagy in checkdeps
* an useless line found by Nagy in resolvedeps
* data wasn't set to the missing dependencies in sync_prepare
* use the MALLOC macro in resolvedeps
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm_depcmp is simple enough that we shouldn't need constant debug logging,
and the logging we do have in there negatively impacts our speed regardless
of whether we actually are seeing it or not. If it ever needs debugging, it
would be trivial to reimplement it by just temporarily reverting this
commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
Hopefully these are unnecessary, as they were probably added originally to
cover up a problem instead of finding the root cause. I'd rather fail hard
in these cases anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
_alpm_innerconflicts: check for target<->target conflicts
_alpm_outerconflicts: check for target<->localpkg conflicts
This will be useful in sync.c clean-up and in testdb.c
As an application the patch also fixes a misleading message (and a memleak)
in add.c
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
checkdeps and resolvedeps now take both a remove list and an install list as
arguments, allowing dependencies to be calculated correctly.
This broke the sync990 pactest, but this pactest used dependencies and
provides in an unusual way, so it has been changed.
Dan: the sync990 pactest was just plain wrong. It didn't satisfy the
dependencies correctly, so should never have succeeded.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: some variable renaming, clarification in commit message]
Signed-off-by: Dan McGee <dan@archlinux.org>
In the case of a packaging error where install or changelog had bad permissions,
pacman respected the original permissions without trying to fix it - this means
that some operations (changelog) artificially required root permissions to run
In addition, minor function housekeeping on _alpm_unpack
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
This closes out FS#6500 and covers cases where the package names contain regex
characters (i.e. the case of dvd+rw-tools)
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
* The frontend calls alpm_trans_prepare(&data), and in case of errors,
receive the missing dependencies / conflicts / etc in the data pointer.
It apparently needs to free this structure totally with :
alpm_list_free_inner(data, free)
alpm_list_free(data)
So I added alpm_list_free_inner(data, free) in
pacman/{sync.c,remove.c,add,c}
* in _alpm_sync_prepare, the deps and asked lists were not freed in case
of errors (unresolvable conflicts).
Besides the code for handling this case was duplicated.
* in _alpm_remove_commit, free was used instead of alpm_list_free for
newfiles.
* newline fix in pacman/sync.c
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
An alpm_list_free call was missing.
Also make use of alpm_list_free_inner in both _alpm_sync_free and
_alpm_trans_free.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This operation made sense in the days before sync DBs existed, but it no
longer has the same usefulness it once did.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
From now on libalpm informs user about packages which will be
installed/removed in wrong order.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The alpm_get_upgrades was exactly the same as find_replacements +
_alpm_sync_sysupgrade, except that it automatically made the eventual
replacements, without asking the user : Replace %s with %s/%s? [Y/n]
The replace question, asked in find_replacements. can now be skipped by
using a NULL trans argument, so that we get the same behavior as with
alpm_get_upgrades.
So alpm_db_get_upgrades() can now be replaced by
alpm_sync_sysupgrade(db_local, syncdbs).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch introduces versioned provisions in "provision 1.0-1" format.
_alpm_db_whatprovides was modified accordingly (added sync500.py),
alpm_depcmp was modified accordingly (add043.py passes now; added add044.py
and add045.py).
Notes:
alpm_db_search now uses the whole versioned %PROVIDES% string in its search.
debug logging was simplified in alpm_depcmp.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xavier: fixed a few typos, duplicate const strings with strdup before
modifying them, put some debugging back in alpm_depcmp, minor code cleanups
(var/function renaming), added a note in PKGBUILD man page.]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: made strcmp checks clearer, added a comment]
Signed-off-by: Dan McGee <dan@archlinux.org>
dash doesn't pass positional parameters to sourced scripts, causing install
scripts to fail. Instead of sourcing the script, make it executable and
call it directly which allows positional parameters to be passed correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
pmdepmissing_t was used for two totally different things :
missing dependencies, and dependency conflicts.
So this patch simply adds a type for dep conflicts,
and convert the code to use it.
This fix the TODO in conflict.c :
/* TODO WTF is a 'depmissing' doing indicating a conflict? */
Additionally, the code in conflict.c now eliminates the duplicated conflicts.
If pkg1 conflicts with pkg2, and pkg2 conflicts with pkg1, only one of them will be stored.
However the conflict handling in sync_prepare (sync.c) is still very asymetrical, and very ugly too.
This should be improved in the future (there is already a pending patch from Nagy that cleans it a lot).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
The names related to conflicts are misleading :
For dependencies conflicts, the type is pmdepmissing,
and the function names contain just "conflict".
For file conflicts, the type is pmconflict,
and some functions contained just "conflict", some others "fileconflict".
So this is the first step for improving the situation.
Original idea/patch from Nagy, but the patch already didn't apply anymore,
so I did it again.
The main difference is that I kept the conflictype, with the following renaming :
pmconflicttype_t -> pmfileconflicttype_t
PM_CONFLICT_TYPE_TARGET -> PM_FILECONFLICT_TARGET
PM_CONFLICT_TYPE_FILE -> PM_FILECONFLICT_FILESYSTEM
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
resolvedeps will now search for other satisfiers
when we don't let it add a package from IgnorePkg.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
And check the IgnorePkg handling is done correctly in the other places.
For example, -Qu and -Su will automatically skip the ignored packages (-Su will print a warning),
but -S will install ignored packages anyway, because it was asked explicitly.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This file only contained one private function : _alpm_db_whatprovides .
And the public alpm_db_whatprovides was in db.c , so I moved everything there.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: updated POTFILES.in as well]
Signed-off-by: Dan McGee <dan@archlinux.org>
The old alpm_list_find was renamed to alpm_list_find_ptr, and a new
alpm_list_find was introduced, which uses the fn comparison-function
parameter in its decision.
Now both alpm_list_find_ptr (a new ptrcmp helper function was also
added) and alpm_list_find_str are just an alpm_list_find call.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: made ptrcmp a static function]
Signed-off-by: Dan McGee <dan@archlinux.org>
Legacy code is hitting the trash here. Remove unnecessary _alpm_time2string
time storage abstraction in favor of just writing the time_t value to the
disk.
The only drawback is that everyone's sync DBs will have to be updated at
least once so that the lastupdate values are stored right. :)
Signed-off-by: Dan McGee <dan@archlinux.org>
So I spent a good 4 hours tracking a bug down tonight due to
alpm_list_copy_data not actually doing what I expected to do. We can't find
the size of an object we don't know the type of, so rewrite it so we pass
in the size explicitly. This was making _alpm_pkg_dup fail and causing all
sorts of other issues.
Signed-off-by: Dan McGee <dan@archlinux.org>
Holy inefficient batman! For a pacman -Qt operation (when we are using
compute_requiredby and not database entries), splitdep was being called ~1.3
million times on my local database. By splitting when we read the DB, we
drop this number to around 1700 and save a LOT of time in doing so (a 5x
increase in pacman -Qt speed here).
Note that the depends alpm_list_t in the package struct is no longer a
string list, but a list of pmdepent_t objects.
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead of using the often-busted REQUIREDBY entries in the pacman database,
compute them each time they are required. This should help many things:
1. Simplify the codebase
2. Prevent future database corruption
3. Ensure when we do use requiredby, it is always correct
4. Shrink the pmpkg_t memory overhead
Signed-off-by: Dan McGee <dan@archlinux.org>
It's time to define that alpm_list_add(list, foo) adds 'foo' to the end of
'list' and returns with 'list', because:
1. list is a list, not a set.
2. sortbydeps _needs_ an alpm_list_add definition to work properly.
As a first step, I used this definition in recursedeps.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: punctuation cleanup in commit message and code comments, added comment
to alpm_list_add]
Signed-off-by: Dan McGee <dan@archlinux.org>
Add some const specifiers to the dep functions that can have them. In
addition, rewrite alpm_dep_get_string to use snprintf and cover all of
the bases (operators).
Signed-off-by: Dan McGee <dan@archlinux.org>
Too many fields were being shown on -Qip output, and sizes were not always
correct (-Qi and -Qip output on the same package did not agree).
Signed-off-by: Dan McGee <dan@archlinux.org>
This really doesn't give us any regressions in behavior, so it is safe to
do although quite ugly. Tell the conflict checking code to ignore symlinks
to dirs so that they are not seen as conflicts.
Hopefully this entire commit will get factored out soon enough.
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 2ee90ddae2 did a special check to see
if we were removing the head node, but not the tail node. Add a special case
for the tail node to ensure all relevant pointers get updated.
Signed-off-by: Dan McGee <dan@archlinux.org>
The old code thought that alpm_db_whatprovides returns with a list of strings (package names).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit b55abdce7a introduced an lstat wrapper
function that never dereferences paths with a trailing slash, but still
called lstat on path instead of newpath. Oops!
Signed-off-by: Dan McGee <dan@archlinux.org>
Setting this option will change the download progress to show the amount
downloaded, download rate, ETA, and download percent of the entire
download list rather than per each individual file.
The progress bar is still based on the completion of the current file
regardless if the TotalDownload option is set.
This closes FS#7205.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This option acts as if IgnorePkg was set on each package in the group.
This closes FS#1592.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 47622eef4d introduced localized times
in the metadata by way of storing the UNIX epoch value instead of a hard
coded date string. However, it missed a few things:
* If we weren't in the C/POSIX/en_US locale, the date parsing would fail
as it tried to use the abbreviations of the locale being used. Fix this
by switching the LC_TIME value before we parse a date.
* We used ctime to print the date value, which is always the C locale
string. Instead, use strftime to print a localized date string.
Signed-off-by: Dan McGee <dan@archlinux.org>
List head nodes contain null 'prev' pointer, which we can (ab)use to maintain a
back reference to the tail pointer of the list.
While list additions are not _significantly_ improved, they are still sped up.
Original
$ time pacman -Qo /usr/bin/wtpt
/usr/bin/wtpt is owned by lcms 1.17-2
real 0m3.623s
user 0m1.883s
sys 0m1.473s
New
$ time pacman -Qo /usr/bin/wtpt
/usr/bin/wtpt is owned by lcms 1.17-2
real 0m2.006s
user 0m0.263s
sys 0m1.627s
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Linux lstat follows POSIX standards and dereferences a symlink pointing
to a directory if there is a trailing slash. For purposes of libalpm, we
don't want this so make a lstat wrapper that suppresses this behavior.
Signed-off-by: Dan McGee <dan@archlinux.org>
Don't open a stream to the logfile until necessary. This will allow us
to catch any errors in opening the logfile instead of ignorning them.
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead of declaring the extern variable in every *.c file, include it in
the header file that makes sense. This means handle.h for the handle, and
conf.h for the pacman side config object.
Signed-off-by: Dan McGee <dan@archlinux.org>
I broke scriptlet logging with ad691001e2.
Readd more or less what was there before, although it still needs a lot of
work including hopefully rewriting it to a new event subsystem and having
it log to a seperate file.
Signed-off-by: Dan McGee <dan@archlinux.org>
Hopefully these new autoconf macros, with a little magic, will allow us to
compile with any compiler and still choose the options we have available
to us.
Tested locally with gcc 4.2.2 and gcc 3.4.6; the latter doesn't support two
of the items we previously had hardcoded in our CFLAGS.
Signed-off-by: Dan McGee <dan@archlinux.org>
%d was used, which worked for Linux and FreeBSD. Not so for Darwin. The
warning was probably spat out when compiling on x68_64 as well, but no
developers use this architecture as their primary one.
Signed-off-by: Dan McGee <dan@archlinux.org>
Package dup needs to copy all members. Nathan had his implementation, but
I generalized it to this new alpm_list function (and will use it in the
next commit).
CC: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
These macros take the place of the common 4 or 5 line blocks of code we had
in most places that called malloc or calloc. This should reduce some code
duplication and make memory allocation more standard in libalpm.
Highlights:
* Note that the MALLOC macro actually uses calloc, this is just for safety
so that memory is initialized to 0. This can be easily changed in one
place.
* One malloc call was completely eliminated- it made more sense to do it
on the stack.
* The use of RET_ERR in public functions (mainly the alpm_*_new functions)
was standardized, this makes sense so pm_errno is set.
Signed-off-by: Dan McGee <dan@archlinux.org>
We had a lot of unnecessary overstatements of libraries to include on
linking, and autoconf/automake takes care of this for us. This also helps
some compilation issues on other platforms.
Signed-off-by: Dan McGee <dan@archlinux.org>
The old code used only the depend.name in messages, which might have not
been informative. The new code uses the whole dependency string in
%DEPENDS% format.
(Dan: slight English clarification in one of the messages)
Signed-off-by: Dan McGee <dan@archlinux.org>
Public alpm_dep_get_string function is introduced, which converts a
pmdepend_t structure to printable string in %DEPENDS% format. This
function is now used in pacman to print dependency error messages.
Signed-off-by: Dan McGee <dan@archlinux.org>
The old code used memcmp, which is not good for comparing strings:
"pkgname"'\0''\0' should be equal to "pkgname"'\0''a' for example.
The new code uses strcmp.
Signed-off-by: Dan McGee <dan@archlinux.org>
The recommended C99 way to print the value of a time_t is to cast it to
uintmax_t or intmax_t. Do this to ensure compatability with all platforms.
Signed-off-by: Dan McGee <dan@archlinux.org>
Anything dealing with libintl and localization should be correctly guarded
inside an ENABLE_NLS block on both the pacman and libalpm sides.
Signed-off-by: Dan McGee <dan@archlinux.org>
This displays the download size, taking into account delta files and
cached files.
This closes FS#4182.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Delta files will be used if the size is smaller than a percent
(MAX_DELTA_RATIO) of the package size.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow deltas and packages to share the md5sum checking code.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The code didn't match the following comment :
"A depends on B through n depends <=> A listed in B's requiredby n times"
It stopped at n=1 with a break.
I was surprised to see this case happens in real, that's how I noticed the
bug: wine depends on both freeglut and glut, while freeglut provides glut.
So when installing wine, the update_depends function listed wine twice in
freeglut's requiredby. But the compute_requiredby function (used when
installing freeglut, and used by testdb) listed wine only once in
freeglut's requiredby. That made testdb unhappy.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 4853a4aad9 used the tmpdir variable
for checking the existence of /bin/sh, without resetting it.
This caused /bin/sh to be deleted during the cleanup part, as soon as a scriptlet
other than pre_upgrade or pre_install was executed.
For example, on the first post_upgrade during a -Su.
I introduced two variables : clean_tmpdir and restore_cwd, for deciding what should
be done in the cleanup part.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This code assumed that DBPath was under RootDir, while this is not necessarily the case :
pacman doesn't enforce anymore than DBPath is under RootDir.
So now, all scriptlets will be put somewhere in RootDir/tmp/, so that when it chroots in RootDir,
the scriptlets are still available inside the chroot.
This also removes the need of normalizing both dbpath and rootdir, in order to do computation on the paths.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
We had way too much going on with the Doxygen manpage generation. Clean it
up quite a bit by removing directory manpages, using relative paths, not
having a manpage for every single alpm function, and ensuring internal
functions are not documented publicly.
Signed-off-by: Dan McGee <dan@archlinux.org>
Some of the error messages in _alpm_pkg_load failed to use the pkgname
value when printing, which made error messages rather hard to decode.
Signed-off-by: Dan McGee <dan@archlinux.org>
Change the default visibility of libalpm functions to internal instead of
hidden- this allows for slightly better optimization because it tells GCC
that the function can never be called outside of the current module (see
http://gcc.gnu.org/onlinedocs/gcc/Function-Attributes.html).
Also added some attributes to the pacman print functions so that they check
the format strings being passed to them.
Signed-off-by: Dan McGee <dan@archlinux.org>
If /bin/sh is missing in the root directory, scriptlets cannot be executed, as
we're explicitly calling it.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
The md5 routines are one of the chokepoints of libalpm (main chokepoint being
archive extraction). Although IO delay causes a lot of it, we can at least
inline some of the md5 stuff as we aren't that concerned about space and
eliminate quite a few function calls.
Signed-off-by: Dan McGee <dan@archlinux.org>
The code for setting the lastupdate file path still referenced both the
root and dbpath, when we should only be using dbpath. Fix it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Packages and DBs now support using the UNIX epoch (seconds since Jan 1, 1970)
for use in builddate and installdate. This will only affect newly built
packages. Old existing packages with the text format are still supported, but
this is deprecated.
In the case of removal of text time support, this code will fail gracefully,
returning the start of the epoch for broken packages.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
In most cases, we want to fully scan a package when we load it, which serves
as a integrity verification check. However, there are times when it is only
desired to read the metadata and nothing else, so allow the caller of pkg_load
to choose the behavior they need.
This pays big dividends in speeding up pacman cache cleaning functionality.
Old (729 packages):
real 1m43.717s
user 1m20.785s
sys 0m2.993s
New (729 packages):
real 0m25.607s
user 0m19.389s
sys 0m0.543s
Signed-off-by: Dan McGee <dan@archlinux.org>
pacman/callback.c already did the work I set out to do with this commit, so
update the comments accordingly in the frontend and backend.
Signed-off-by: Dan McGee <dan@archlinux.org>
Previously, package names must match a specified scheme or they will cause
pacman add operations to fail. This is not a very intelligent or necessary
way to act, so remove the dependency on the name of the package to be
installed and read all relevant information from the metadata instead.
This does have one causality to be addressed later- pacman cache cleaning
functionality, which has never been phenomenal, just lost most capability.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add some alpm functions for getting optdepends, have makepkg include them
in the PKGINFO file, and have a pacman -Qi operation display the raw string
as stored by libalpm.
Signed-off-by: Dan McGee <dan@archlinux.org>
As seen with the recent upgrade of pacman and the removal of the
pacman.d/current mirrorlist, files that were formerly in the backup array
get deleted upon their removal, which could be dangerous. Instead, we should
use the combined backup array of the old and new package. This fix should
address this issue in a relatively straightforward way.
In addition, old files should be moved to pacsave locations as expected.
Signed-off-by: Dan McGee <dan@archlinux.org>
installdate should never be present in a package descfile, so get rid of it.
With the last commit, we also don't need the util strtoupper function.
Signed-off-by: Dan McGee <dan@archlinux.org>
This fix FS#8081. The tr_TR locale has known issue with case insensitive
comparisons, mostly because upper(i) != I.
So the .PKGINFO files generated by makepkg MUST contain all keywords in lowercases now.
This was already done, but was not mandatory.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
The mistake fixed in commit 26441cf65c
was actually done at two places.
This fix the second one.
Also remove one unnecessary newline introduced by
commit d34b2c4ed8
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
When calling a function of the alpm_option_get_* group, you get a segfault
if you don't call alpm_initialize() first. With this patch those functions
set pm_errno to PM_ERR_HANDLE_NULL and return an error value if handle ==
NULL.
(Dan: modified to meet pacman coding standards)
Signed-off-by: Stefano Esposito <stefano.esposito87@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
My two previous hacks related to this part
(8038190c7c and
b15a5194d1) were caused by the lack of
understanding of a feature introduced a while ago:
Better control over CTRL-C interruptions -- do not leave the DB in an
inconsistent state (54008798ef).
Now I have been looking at this commit, and the added feature is indeed
interesting. The main problem I had with it is that it does a rather
unusual use of alpm_trans_release, which caused a few problems that I tried
to fix in a weird way. I think these problems were caused by the fact that
there weren't any difference between "interrupt transaction" and "release a
transaction which failed" actions from the alpm_trans_release POV. So I
decided to add a new function instead, alpm_trans_interrupt, which is
called on Ctrl+C, and which only sets trans->state to STATE_INTERRUPTED so
that remove_commit and add_commit can exit cleanly at a safe moment. This
allowed me to revert my two previous hacks as well.
Also ensure we handle SIGINT correctly in all cases- if a transaction is
not ongoing, then we can free the transaction and exit quickly.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This reverts commit dfc85cb5f5
and b6f3fe6957.
This DB check is already in testdb (among others).
Also testdb now uses the db path set at make time by default,
so specifying the db path is optional.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
I'm currently working on python bindings for alpm written in pyrex. While
working i found that declaring alpm_strerror as
char * alpm_strerror (void)
instead of
char * alpm_strerror (int err)
and then using pm_errno in the implementation instead of err, could make it
more bindings-friendly.
Dan: cleaned up and added void to declaration. Instead of replacing existing
function, add a new function called 'alpm_strerrorlast(void)'.
Signed-off-by: Stefano Esposito <stefano.esposito87@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
One string in de.po differed pretty strongly with its translated version.
It may still be totally wrong as far as translations go, but it compiles
now. Get translater to check.
Also, ensure the proper dbpath gets set in the db when it's created.
Signed-off-by: Travis Willard <travis@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Suppose a package foo depends on foo1, foo2, ..., foon.
Doing pacman -Rc foo1 foo2 ... foon added foo n times to the removal list,
because what checkdeps return is something like :
foo1 is requiredby foo
foo2 is requiredby foo
...
foon is requiredby foo
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Introduce two new methods into the API - alpm_db_register_sync and
alpm_db_register_local, which replace the functionality of
alpm_db_register. db_register_local always returns the local DB, and
db_register_sync will always try to register a sync DB. This conceptually
separates the local DB from sync DBs in the code. Also updated the pacman
frontend to use the new functions. In addition, this changes the location
of all sync DBs in the filesystem from $DBPATH/$REPO to $DBPATH/sync/$REPO,
This removes the silly limitation that a sync DB couldn't be named 'local',
along with structurally separating sync DBs and the local DB in the
filesystem.
Signed-off-by: Travis Willard <travis@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to remove the hack in the frontend where we added a newline
to everything coming out of the pm_printf functions, and instead let the
developer put newlines where they want them. This should be the last hangover
of that auto-newline stuff.
Signed-off-by: Dan McGee <dan@archlinux.org>
As reported by JGC in FS #7652, the check for EACCES is not exactly correct.
We need to check for the ETXTBSY error as well. This is necessary on FreeBSD.
Signed-off-by: Dan McGee <dan@archlinux.org>
A bunch of changes related to my first "real" install of pacman-git into
/usr/local and trying to use it.
* Shift some uses of free -> FREE in libalpm.
* Move stat and sanity checks of config paths into libalpm from the
config and argument parsing in pacman.c.
* Fix issue where dbpath still was not defined early enough due to its
requirement for being used in alpm_db_register. This should be rewritten
so it doesn't have this dependency, but this will work for now.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch cleans up and fix the _alpm_trans_update_depends function
and ensure that all requiredby fields are filled in case of multiple satisfiers
(previously, the handling of mutliple satisfiers in that function was inconsistent).
This makes a special case handling of requiredby in commit_single_pkg() obsolete,
and so allows cleaning that code as well.
Also fixed upgrade056 pactest because :
1) the requiredby fields were wrong, and this wouldn't happen with the fixed _alpm_trans_update_depends().
2) this is a very unusual case anyway (and handling all corner cases combined to a broken database
seems nearly impossible to achieve).
References :
http://www.archlinux.org/pipermail/pacman-dev/2007-July/008919.htmlhttp://www.archlinux.org/pipermail/pacman-dev/2007-July/008920.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
In order to best resolve bug 6404, move some cachedir handling stuff out of
sync.c and into util.c and create two new functions: filecache_find and
filecache_setup. sync.c was rewritten to use these, and alpm_fetch_pkgurl
now also uses these routines.
Signed-off-by: Dan McGee <dan@archlinux.org>
In my opinion, a commiting transaction that failed isn't equivalent
to a prepared transaction.
Some things could have been done in the meantime.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
* Move alpm md5 functions to lib/libalpm/util.c
* Remove unneeded includes for md5.h
* Replace md5 implementation with one from http://www.xyssl.org
Dan: clean up XySSL code by removing parts we don't use, and add a note
saying what changed.
Dan: fix alpm_get_md5sum, off by one error on the malloc call and other
small things.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
There's no need for a second hashing algorithm. MD5 serves the purpose
of verifying that a package file hasn't been corrupted during download.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
This basically moves the code from alpm_release, which was mostly about
unregistering all databases, to a safer alpm_db_unregister_all.
This allows to avoid modifying the dbs_sync list while iterating over it,
and and also prevent alpm_release from looping infinitely when a database
can't be unregistered.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This prevents alpm_release to loop infinitely in case of
an interrupted transaction, where the database wasn't
unregistered.
alpm_release should probably also be fixed, as it can
still loop if db_unregister fails for another reason.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
We were using a void *data element in pmpkg_t before, which is unsafe by its
nature of being untyped. Reimplement data as origin_data being a union that
can hold either a path to a package file or a pointer to a cache database,
and make the other necesary updates in the code to reflect this. See package.h
for details.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove the commented desc_localized stuff, we can find it later in version
control. Also remove some unnecessary includes of the stat header and
use -fstack-protector-all which is a bit more broad.
Signed-off-by: Dan McGee <dan@archlinux.org>
A side effect of the previous commit ( ea9a756eea )
is that it's now possible to use versioned conflicts.
Add two new conflict pactests for showing it.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
I didn't like the patch proposed by Nagy for the sync1002 pactest here:
http://www.archlinux.org/pipermail/pacman-dev/2007-July/008971.html
So here is another attempt of fixing it.
In case of the DEPENDSONLY flag :
1) pass an empty list to resolvedeps instead of the list of targets
2) empty the trans->packages targets list before adding the resolved deps.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
That function wasn't big, but this might be useful
for later refactoring of the search for satisfier code.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The _alpm_sortbydeps function has two main part :
1) initialization of the graph structure
2) the sorting itself
So it didn't seem bad to move the first part to a second function.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
.gitignore works recursively, so we don't need Makefile and Makefile.in
in all of the subdirectory .gitignore files.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a full refactoring of _alpm_add_commit into multiple functions and a
better layout for later. Some highlights:
* No regressions in pactest performance.
* Much cleaner layout. add_commit is split into four functions:
upgrade_remove, extract_single_file, commit_single_pkg, _alpm_add_commit
* No more super-functions, the heaviest (extract_single_file) is finally
under 400 lines, with much improved commenting as well.
* Incorporation of Andrew Fyfe's ideas for fixing FS #7484. Try to handle
all possible cases of extraction combinations with files, symlinks, dirs,
and non-existant entries on the filesystem. This should make our dealings
with libarchive fall more into our control.
Signed-off-by: Dan McGee <dan@archlinux.org>
This replaces the former -D operation that was undocumented and rather
hacky. It can be used with add, upgrade, or sync transactions and will affect
all packages installed. Should close FS #7193.
Also tell makepkg to use this new flag.
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes the failure of the requiredby004 pactest in a not so pretty way,
but it gets the job done. I purposely used the extremely long name of
PM_TRANS_TYPE_REMOVEUPGRADE to be both clear and in the hope that someone
else will figure out a better solution.
Original idea from Nagy Gabor, patch updated and cleaned for current code.
Signed-off-by: Dan McGee <dan@archlinux.org>
remove _alpm_ldconfig call from _alpm_sync_commit,
since sync operation causes an upgrade transaction,
where ldconfig is already run.
Reference:
http://www.archlinux.org/pipermail/pacman-dev/2007-April/008132.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
In 1c9f30b9fa
This change should be done AFTER the TODO in recursedeps is implemented.
Then we'll be able to first sort the list, then call recursedeps which keeps
it sorted. For now, the sorting should still be done as the last step.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Patch from Nagy that makes removedeps use alpm_depcmp.
I also renamed removedeps to recursedeps, as it can have
a more general usage, and added an include_explicit argument,
so we can control if packages explictly installed are added or not.
Note: Small changes made by me (Dan) as well- mostly some English grammar
correction and a few other cleanups.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently the d (nodeps) option skips the s (recursive) part,
rendering the Rsd combination totally useless.
This patch makes a recursive removal still possible using the nodeps option,
as Romashka asked there :
http://bugs.archlinux.org/task/6057#comment17784
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Remove versioncmp.c by moving all functions to locations that make sense.
Move replacement functions (for building without glibc) into util.c where
they belong, and do proper checks for them instead of using __sun__, etc.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove unused buildtype field from pmpkg_t struct and anything associated
with it, as it is unused at the moment. If we need to readd it, it is an
easy revert of this commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
The three chk_ functions overlap for packages both in targets and in the
database. This caused the same conflict to be found in both direction
(A conflicts with B, and B conflicts with A).
This patch avoids this duplication. which shouldn't be needed, but other
changes might be required for that to work correctly.
This also has the unexpected side effect to hide the failure of sync022
pactest, for FS #7415. That's maybe not a good thing though..
Note from Dan: sync022 does succeed, but a sync023 pactest added to check
regressions also seems to pass. This may be a valid fix to this 'problem'
sync022 was meant to find.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Because of this commit:
ea1fef69ad
we lost a lot of gettext-ized messages on the libalpm side. Remove them
in order to clean out these files a bit.
Signed-off-by: Dan McGee <dan@archlinux.org>
There is no real reason to burden our translators with these messages, as
anyone helping to debug these will probably want them in English.
Signed-off-by: Dan McGee <dan@archlinux.org>
We shouldn't translate log messages to pacman.log so it is consistant and
can be parsed by other tools. Remove all gettext _() around these strings.
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the translations from src/pacman/po to just po/ so we can include the
scripts gettext translations in the same message catalog as that of the
pacman frontend. The libalpm message catalog, for now, will remain a separate
existence.
Signed-off-by: Dan McGee <dan@archlinux.org>
I ran flawfinder and sparse over the pacman source code and found a few
things that were worth fixing (and were quick fixes).
Signed-off-by: Dan McGee <dan@archlinux.org>
Adds the ARCHIVE_EXTRACT_NO_OVERWRITE libarchive flags
for extracting files and directories.
This will prevent symlinks for being overwritten by directories.
All other files that need to be extracted should already have
been deleted previously by pacman.
This flag is not used for extracting files in backup array
to /tmp/alpm_XXXX, because this file is created by mkstemp first,
and so needs to be overwritten by the file from the archive.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
With libarchive 2.2.3 (previously 1.3.1), archive_read_extract now returns ARCHIVE_WARN
when a package is extracted as user, because for example, UID=0 or SUID bit can't be set.
This patch makes pacman not treating these warnings as errors anymore,
but simply ignoring them.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
I previously introduced some patches to make just about every path in
pacman/libalpm configurable; doing this with the lockfile seemed a bit too
far and we really should just place the lockfile where it belongs- with the
DB that needs locking.
More details in this thread:
http://archlinux.org/pipermail/pacman-dev/2007-June/008499.html
Signed-off-by: Dan McGee <dan@archlinux.org>
The scriptlet calling had some unneeded complexity for the time being
which we aren't using here. Let's get rid of it until we find a good way
to implement it correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
First reported here:
http://bbs.archlinux.org/viewtopic.php?pid=261861
Newly created files were done with the standard umask, so those that are
extracted seperately and copied to a .pacnew extension will have the wrong
permissions. This should hopefully fix this.
Signed-off-by: Dan McGee <dan@archlinux.org>
