If we are missing a local database file, we get repeated messages over
and over telling us the same thing, rather than being sane and erroring
only once. This package adds an INFRQ_ERROR level that is added to the
mask if we encounter any errors on a local_db_read() operation, and
short circuits future calls if found in the value. This fixes FS#25313.
Note that this does not make any behavior changes other than suppressing
error messages and repeated code calls to failure cases; we still have
more to do in the "local database is hosed" department.
Also make a small update to the wrong but unused flags set in
be_package; using INFRQ_ALL there was not totally correct.
Signed-off-by: Dan McGee <dan@archlinux.org>
We did a good job checking this in add.c, but not necessarily anywhere
else. Fix this up by adding checks into dload.c, remove.c, and conf.c in
the frontend. Also add loggers where appropriate and make the message
syntax more consistent.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't write with extra or unknown whitespace, so there is little
reason for us to trim it when reading either. This also fixes the
hopefully never encountered "paths that start or end with spaces" issue,
for which two pactests have been added. The tests also contain other
evil characters that we have encountered before and handle just fine,
but it doesn't hurt to ensure we don't break such support in the future.
Signed-off-by: Dan McGee <dan@archlinux.org>
This ensures we are actually making correct use of the information gpgme
is returning to us. Marginal being allowed was obvious before, but
Unknown should deal with trust level, and not the presence or lack
thereof of a public key to validate the signature with.
Return status and validity information in two separate values so check
methods and the frontend can use them independently. For now, we treat
expired keys as valid, while expired signatures are invalid.
Signed-off-by: Dan McGee <dan@archlinux.org>
Immediately jump to the cleanup code after setting the return code to -1
in case rename() fails. Otherwise, it will be reset to 0 right after we
leave the if branch.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This accomplishes quite a few things with one rather invasive change.
1. Iteration is much more performant, due to a reduction in pointer
chasing and linear item access.
2. Data structures are smaller- we no longer have the overhead of the
linked list as the file struts are now laid out consecutively in
memory.
3. Memory allocation has been massively reworked. Before, we would
allocate three different pieces of memory per file item- the list
struct, the file struct, and the copied filename. What this resulted
in was massive fragmentation of memory when loading filelists since
the memory allocator had to leave holes all over the place. The new
situation here now removes the need for any list item allocation;
allocates the file structs in contiguous memory (and reallocs as
necessary), leaving only the strings as individually allocated. Tests
using valgrind (massif) show some pretty significant memory
reductions on the worst case `pacman -Ql > /dev/null` (366387 files
on my machine):
Before:
Peak heap: 54,416,024 B
Useful heap: 36,840,692 B
Extra heap: 17,575,332 B
After:
Peak heap: 38,004,352 B
Useful heap: 28,101,347 B
Extra heap: 9,903,005 B
Several small helper methods have been introduced, including a list to
array conversion helper as well as a filelist merge sort that works
directly on arrays.
Signed-off-by: Dan McGee <dan@archlinux.org>
As noted by Allan, we failed pretty hard if gpgme was compiled out. With
these changes, only sign001.py fails. This can/will be fixed later once
we beef up the test suite with more signing tests anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
If we can't read the keyring, gpgme will output confusing debug
information and fail to verify the signature, so we should log some
debug information.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a wrapper function for access() which logs some debug
information and eases handling in case of split directory and filename.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses FS#25141. We shouldn't remove every empty directory we
come across during the removal process unless it is truly not known to
any other package. This will prevent removal of essential directories
such as '/var/lock/'.
This is accomplished by first checking the empty/non-empty status of a
directory, which was previously done implicitly by calling rmdir() and
ignoring errors. We do this to avoid the next (new) check in most cases,
which is to look at all local packages to see if the to-be-removed
directory is present in another packages' filelist. If we do not find it
anywhere, then we remove it, else we keep the file around.
The pactest has been updated to test more cases, as well as finding a
flaw in the original expected to fail case- we need separate DIR and
FILE based EXIST rules.
Signed-off-by: Dan McGee <dan@archlinux.org>
This can only ever operate on the local database, and a local package at
that. Change the function signature to take a handle and package object,
add the relevant asserts, and ensure the frontend can detect the package
not found condition when finding packages to pass to this method.
Signed-off-by: Dan McGee <dan@archlinux.org>
The bulk of this commit is adding new tests to ensure the new behavior
works without disrupting old behavior. This is a relatively sane maneuver
when a package adds a conf file (e.g. '/etc/mercurial/hgrc') that was
not previously in the package, but it is placed in the backup array. In
essence, we can treat the existing file as having always been a part of
the package and do our normal compare/install as pacnew logic checks.
Signed-off-by: Dan McGee <dan@archlinux.org>
This code duplication has always been a rather clumsy casuality of
fixing some past upgrade issues. Unify the removal code across upgrade
and remove operations into a new _alpm_remove_single_package() method
wihch makes it very clear how we handle upgrade and remove differently,
via several conditionals on newpkg.
This commit highlights interesting behavior such as the fact that the
implicit removal in every package upgrade never gets transaction events
or progress callbacks.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes "error: no previous prototype for '_alpm_raw_cmp'
[-Werror=missing-prototypes]" warnings, and also prevents someone from
getting the prototypes and functions out of sync.
Signed-off-by: Dan McGee <dan@archlinux.org>
Restore some sanity to the number of arguments passed to _alpm_download
and curl_download_internal.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This means creating a new struct which can pass more descriptive data
from the back end sync functions to the downloader. In particular, we're
interested in the download size read from the sync DB. When the remote
server reports a size larger than this (via a content-length header),
abort the transfer.
In cases where the size is unknown, we set a hard upper limit of:
* 25MiB for a sync DB
* 16KiB for a signature
For reference, 25MiB is more than twice the size of all of the current
binary repos (with files) combined, and 16KiB is a truly gargantuan
signature.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
URLs might end with a slash and follow redirects, or could be a
generated by a script such as /getpkg.php?id=12345. In both cases, we
may have a better filename that we can write to, taken from either
content-disposition header, or the effective URL.
Specific to the first case, we write to a temporary file of the format
'alpmtmp.XXXXXX', where XXXXXX is randomized by mkstemp(3). Since this
is a randomly generated file, we cannot support resuming and the file is
unlinked in the event of an interrupt.
We also run into the possibility of changing out the filename from under
alpm on a -U operation, so callers of _alpm_download can optionally pass
a pointer to a *char to be filled in by curl_download_internal with the
actual filename we wrote to. Any sync operation will pass a NULL pointer
here, as we rely on specific names for packages from a mirror.
Fixes FS#22645.
Signed-off-by: Dave Reisner <d@falconindy.com>
The supposed safety blanket of this function is better handled by
explicit length checking and usages of strlen() on known NULL-terminated
strings rather than hoping things fit in a buffer. We also have no need
to fully fill a PATH_MAX length variable with NULLs every time as long
as a single terminating byte is there. Remove usages of it by using
strcpy() or memcpy() as appropriate, after doing length checks via
strlen().
Signed-off-by: Dan McGee <dan@archlinux.org>
We can readily detect the first node in a list by checking if
node->prev->next is NULL. So there is no need to pass the head
of the list to this function and its prototype now looks like
all the other item accessors.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The only thing this accessor did was remove the const qualifier
given our entire list implementation requires passing around the
head anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
They are placeholders, but important for things like trying to re-sync a
database missing a signature. By using the alpm_db_validity() method at
the right time, a client can take the appropriate action with these
invalid databases as necessary.
In pacman's case, we disallow just about anything that involves looking
at a sync database outside of an '-Sy' operation (although we do check
the validity immediately after). A few operations are still permitted-
'-Q' ops that don't touch sync databases as well as '-R'.
Signed-off-by: Dan McGee <dan@archlinux.org>
Show output in -Qip for each package signature, which includes the UID
string from the key ("Joe User <joe@example.com>") and the validity of
said key. Example output:
Signatures : Valid signature from "Dan McGee <dpmcgee@gmail.com>"
Unknown signature from "<Key Unknown>"
Invalid signature from "Dan McGee <dpmcgee@gmail.com>"
Also add a backend alpm_sigresult_cleanup() function since memory
allocation took place on this object, and we need some way of freeing
it.
Signed-off-by: Dan McGee <dan@archlinux.org>
The error code is in fact a bitmask value of an error code and an error
source, so use the proper function to get only the relevant bits. For
the no error case, this shouldn't ever matter, but it bit me when I was
trying to compare the error code to other values and wondered why it
wasn't working, so set a good example.
Signed-off-by: Dan McGee <dan@archlinux.org>
This gives us more granularity than the former Never/Optional/Always
trifecta. The frontend still uses these values temporarily but that will
be changed in a future patch.
* Use 'siglevel' consistenly in method names, 'level' as variable name
* The level becomes an enum bitmask value for flexibility
* Signature check methods now return a array of status codes rather than
a simple integer success/failure value. This allows callers to
determine whether things such as an unknown signature are valid.
* Specific signature error codes mostly disappear in favor of the above
returned status code; pm_errno is now set only to PKG_INVALID_SIG or
DB_INVALID_SIG as appropriate.
Signed-off-by: Dan McGee <dan@archlinux.org>
Now that the filelists capture mode and size information, we can read
the data from there and prevent having to loop through and uncompress
every archive to check required diskspace usage.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to capture size and mode data when building filelists
from package files. Future patches will take advantage of this newly
available information, and frontends can use it as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
This saves replicating the potentially large list of files in a package
that is being removed.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We passed in 'line', but not 'buf.line'. In addition, the macros
building off of READ_NEXT() assume variable names anyway. Since we only
use these macros in one function, might as well simplify them.
Signed-off-by: Dan McGee <dan@archlinux.org>
Change the check into a loop over all signatures present and returned by
GPGME. Also modify the return values and checks slightly now that I know
a little bit more about what type of values are returned.
Signed-off-by: Dan McGee <dan@archlinux.org>
There is little need to expose the guts of this function even within the
library. Make it static in be_local.c, and clean up a few other things
since we know exactly where it is being called from:
* Remove unnecessary origin checks in _cache_get_*() methods- if you are
calling a cache method your package type will be correct.
* Remove sanity checks within local_db_read() itself- packages will
always have a name and version if they get this far, and the package
object will never be NULL either.
The one case calling this from outside the backend was in add.c, where
we forced a full load of a package before we duplicated it. Move this
concern elsewhere and have pkg_dup() always force a full package load
via a new force_load() function on the operations callback struct.
Signed-off-by: Dan McGee <dan@archlinux.org>
Some of these are legit (the backup hash NULL checks), while others are
either extemely unlikely or just impossible for the static code
analysis to prove, but are worth adding anyway because they have little
overhead.
Signed-off-by: Dan McGee <dan@archlinux.org>
Modifying prefix caused tmp directories to be left behind after
running scriptlets, and the path '/' to be passed to _alpm_rmrf. Broken
in f01c6f.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This avoids, probably among other things, leaving the lock file in place
after a SIGINT'd sync DB update.
Fixes regression introduced in 4f8ae2b.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The following function renames take place for the same reasoning as
the previous commit:
_alpm_grp_new -> _alpm_group_new
_alpm_grp_free -> _alpm_group_free
_alpm_db_free_grpcache -> _alpm_db_free_groupcache
_alpm_db_get_grpfromcache -> _alpm_db_get_groupfromcache
Signed-off-by: Allan McRae <allan@archlinux.org>
Using grp instead of group is a small saving at the cost of clarity.
Rename the following functions:
alpm_option_get_ignoregrps -> alpm_option_get_ignoregroups
alpm_option_add_ignoregrp -> alpm_option_add_ignoregroup
alpm_option_set_ignoregrps -> alpm_option_set_ignoregroups
alpm_option_remove_ignoregrp -> alpm_option_remove_ignoregroup
alpm_db_readgrp -> alpm_db_readgroup
alpm_db_get_grpcache -> alpm_db_get_groupcache
alpm_find_grp_pkgs -> alpm_find_group_pkgs
Signed-off-by: Allan McRae <allan@archlinux.org>
Only one of these looked like a real red flag, in find_requiredby(), but
it doesn't hurt to fix several of them up anyway.
Unfortunately, we can't turn this on universally due to things like the
sync(), remove(), etc. builtins which we often use as variable names.
Signed-off-by: Dan McGee <dan@archlinux.org>
We have just looped through the list of files, so might as well get
the count as we go.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses FS#24904. In a normal upgrade case, this replacement
seems to work just fine. However, when doing a sync "replace" type
upgrade, we weren't properly handling this edge case due to path
comparison not ignoring trailing slashes. Fix this by pruning any
trailing slashes past a certain point of file conflict resolution where
we no longer need them, which allows us to safely detect cases such as
now tested in the new pactest.
Signed-off-by: Dan McGee <dan@archlinux.org>
While researching the root cause of FS#24904, I couldn't help but clean
up some of the cruft in here. A few whitespace/line-wrapping issues, but
also fix shadowed variables and add some const where applicable.
Signed-off-by: Dan McGee <dan@archlinux.org>
We can reorganize things a bit to not require reading a directory-only
entry first (or at all). This was noticed while working on some pactest
improvements, but should be a good step forward anyway.
Also make _alpm_splitname() a bit more generic in where it stores the
data it parses.
Signed-off-by: Dan McGee <dan@archlinux.org>
Discovered this when doing some pactest rewrite work to generate
archives in memory only. If a sync database file or PKGINFO file is
missing a newline on the final line, the text from that line gets tossed
aside and never read into the package struct. This is pretty critical
when that last line is a depend or something.
Signed-off-by: Dan McGee <dan@archlinux.org>
These operate on the handle, and the state is stored on the handle, so
move them where they belong. Up until now only the transaction stuff
calls them, but this will soon change and alpm_db_update() will handle
locking all on its own.
Signed-off-by: Dan McGee <dan@archlinux.org>
Start by converting all of our flags to a 'status' bitmask (pkgcache
status, grpcache status). Add a new 'valid' flag as well. This will let
us keep track if the database itself has been marked valid in whatever
fashion.
For local databases at the moment we ensure there are no depends files;
for sync databases we ensure the PGP signature is valid if
required/requested. The loading of the pkgcache is prohibited if the
database is invalid.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is another step toward doing both local database validation
(ensuring we don't have depends files) and sync database validation (via
signatures if present) when the database is registered.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the ideal place to do it as all clients should be checking the
return value and ensuring there are no errors. This is similar to
pkg_load().
We also add an additional step of validation after we download a new
database; a subsequent '-y' operation can potentially invalidate the
original check at registration time.
Note that this implementation is still a bit naive; if a signature is
invalid it is currently impossible to refresh and re-download the file
without manually deleting it first. Similarly, if one downloads a
database and the check fails, the database object is still there and can
be used. These shortcomings will be addressed in a future commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
For the files count when loading from a package, we can keep a counter.
The two in the frontend were completely useless due to the fact that if
sync_dbs is non-NULL, alpm_list_count() will always be greater than 0.
Signed-off-by: Dan McGee <dan@archlinux.org>
This doesn't fix the real (bigger) problem of failing to parse sync
databases without directory entries, but it does prevent the parser from
segfaulting when the first desc file encountered did not have a
directory entry, among other conditions.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the first step at separating the pacman message catalog and the
scripts message catalog. Makefiles, configure.ac, and other such files
are adjusted accordingly, as well as renaming files. The TEXTDOMAIN of
scripts is also adjusted.
Note that no actual pot or po files get changed here; these will get
pruned in a future commit so each catalog contains only the necessary
messages.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is for the eventual 4.0.0 release, but more importantly to
logically separate new translations and strings from the PO split about
to happen between pacman and scripts.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to separate the name and hash elements in one place and
not scatter different parsing code all over the place, including both
the frontend and backend.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is an unfortunate chain of events. RET_ERR and RET_ERR_VOID will
eventually call CHECK_HANDLE, which resets the handle's pm_errno member.
Dan probably had a reason for doing this, so we merely switch the order
of operations in the RET_ERR macros to avoid stomping on our pm_errno.
Signed-off-by: Dave Reisner <d@falconindy.com>
* Check the return value of canonicalize_path() for non-NULL
* Use ASSERT and RET_ERR as appropriate
* Make remove_cachedir() use same path munge logic as add_cachedir()
Signed-off-by: Dan McGee <dan@archlinux.org>
Documented the _alpm_download() function in dload.c
Signed-off-by: Kerrick Staley <mail@kerrickstaley.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Added a line to the top of each of be_local.c, be_package.c, and
be_sync.c indicating their purposes.
Signed-off-by: Kerrick Staley <mail@kerrickstaley.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We were using copy_data before; this works for the struct itself but not
the strings contained within. Fix it up by duplicating all the data as
we do with our other structures.
Signed-off-by: Dan McGee <dan@archlinux.org>
Calling get_logcb() here would reset any previous setting of
handle->pm_errno due to the CHECK_HANDLE() macro contained within. This
would make error setting a bit funny if one set pm_errno before calling
_alpm_log(), such as in the RET_ERR() macro.
Signed-off-by: Dan McGee <dan@archlinux.org>
This removes the need to write accessor methods for every type we have,
and simplifies the API. Any type that doesn't need magic* can be
converted in this fashion to make it easier for frontend applications to
use, as well as make it less of a pain to introduce new such structs in
the future.
* "magic" meaning something like pmpkg_t where values can be lazy loaded.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is more in line with reality and what we have our makepkg, etc.
options named anyway.
Original-patch-by: Kerrick Staley <mail@kerrickstaley.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Don't name static methods with a gpgme_ prefix to avoid confusion with
methods provided by the library. These are static and local to our
file so just give them sane non-prefixed names.
* Rework sigsum_test_bit() to not require assignment.
* Don't balk if there is more than one signature available (for now,
only check the first).
* Fix error codes in publicly visible methods to return -1, not 0, if pkg
or db are not provided.
Signed-off-by: Dan McGee <dan@archlinux.org>
We didn't do due diligence before and ensure prior pm_errno values
weren't influencing what happened in further ALPM calls. I observed one
case of early setup code setting pm_errno to PM_ERR_WRONG_ARGS and that
flag persisting the entire time we were calling library code.
Add a new CHECK_HANDLE() macro that does two things: 1) ensures the
handle variable passed to it is non-NULL and 2) clears any existing
pm_errno flag set on the handle. This macro can replace many places we
used the ASSERT(handle != NULL, ...) pattern before.
Several other other places only need a simple 'set to zero' of the
pm_errno field.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Move several variables into better scope
* const-ify a few variables
* Avoid duplicating filelists if it is unnecessary
* Better handling out out of memory condition when adding file conflicts
to our list
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows callers to retrieve it from wherever is convenient, which
may or may not be on the package object itself.
Signed-off-by: Dan McGee <dan@archlinux.org>
This method is old, it doesn't adequately check for a NULL server list,
and can easily be done using better API method we provide these days.
All former users of this method can get similar results by calling
alpm_db_get_servers() and using the data from the returned server list.
Signed-off-by: Dan McGee <dan@archlinux.org>
Note that is a bit different than the normal _alpm_db_path() method; the
caller is expected to free the result.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the last user of our global handle object. Once again the diff
is large but the functional changes are not.
Signed-off-by: Dan McGee <dan@archlinux.org>
This makes these functions consistent with the rest of the transaction
related API calls. We do an additional assert to ensure the handle
attached to the package is the same as the handle passed in.
Signed-off-by: Dan McGee <dan@archlinux.org>
The siglevel field of a newly created pmdb_t struct is now
initialized when it is created in _alpm_db_new().
Signed-off-by: Kerrick Staley <mail@kerrickstaley.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
A few of these snuck in as of late, some from the table display patches
that were using the previous format before we changed it after the 3.5.X
major release.
Noticed-by: Kerrick Staley <mail@kerrickstaley.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit e68f5d9a30 did something a bit silly and changed the
scriptlet calls to use 'newpkg->handle' rather than the 'handle'
argument passed in. Use the handle directly.
Signed-off-by: Dan McGee <dan@archlinux.org>
Begin enforcing the need to pass a handle. This allows us to remove one
more extern handle declaration from the backend.
Signed-off-by: Dan McGee <dan@archlinux.org>
This requires a lot of line changes, but not many functional changes as
more often than not our handle variable is already available in some
fashion.
Signed-off-by: Dan McGee <dan@archlinux.org>
The few remaining instances were utilized for buffers in calls to
snprintf() and realpath(). Both of these functions will always ensure
the returned value is padded with '\0', so there is no need for the
extra byte.
Signed-off-by: Dan McGee <dan@archlinux.org>
The vast majority of the time we will just be passing the same string
value on to the lstat() call. The only time we need to duplicate it is
if the path ends in '/'. In one run using a profiler, only 400 of the
200,000 calls (0.2%) required the string to be copied first.
Signed-off-by: Dan McGee <dan@archlinux.org>
Due to the way we set up the graph structure, we don't always have good
parent information. The changes made in dd8cf0c12d assumed this, so
back them out and just live with the dead pointers being there in the
memory while we are cleaning up after ourselves.
Signed-off-by: Dan McGee <dan@archlinux.org>
These new method signatures return and take handle objects to operate on
so we can move away from the idea of one global handle in the API. There
is also another important change and that deals with the setting of root
and dbpaths. These are now done at initialization time instead of using
setter methods. This allows the library to operate more safely knowing
that paths won't change underneath it.
Signed-off-by: Dan McGee <dan@archlinux.org>
This keeps duplicate code to a minimum. This will come in more handy as
we refactor some of these option setters away.
Signed-off-by: Dan McGee <dan@archlinux.org>
When only downloading a package, pacman can produce some incorrect
output.
> pacman -Sddw nvidia-utils
warning: nvidia-utils-270.41.19-1 is up to date -- reinstalling
This line is now now silenced when using -Sw.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to not require the context (e.g. handle) when calling
this function. Also beef up the checks in the two callers of this
function to bail if the last return code is not ARCHIVE_EOF, which is
the expected value.
This requires a change to one of the pactest return codes and the
overall result of the test, but results in a much safer operating
condition whereby invalid database entries will stop the operation.
Signed-off-by: Dan McGee <dan@archlinux.org>
This kills a lot more global handle business off. sync.c still requires
the handle declaration for one reference that can't be changed yet; it
will be removed in a future patch which isolates all of the necesary API
changes.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will make the patching process less invasive as we start to remove
this variable from all source files.
Signed-off-by: Dan McGee <dan@archlinux.org>
Similar to what we just did for the database; this will make it easy to
always know what handle a given package originated from.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the first step in a long process to remove our dependence on the
global handle variable we currently share in libalpm, with the goal to
make things a bit more thread-safe and re-entrant.
Signed-off-by: Dan McGee <dan@archlinux.org>
These are simple accessor functions for a struct; the handle never even
comes into play when calling these functions.
Signed-off-by: Dan McGee <dan@archlinux.org>
The usefulness of this is rather limited due to it not being compiled
into production builds. When you do choose to see the output, it is
often overwhelming and not helpful. The best bet is to use a debugger
and/or well-placed fprintf() statements.
Signed-off-by: Dan McGee <dan@archlinux.org>
Callers to curl_download_internal now tell us if its okay to continue a
transfer, so obey this instead of using a heuristic.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
If a connection drops below 1kb/s for 10s, curl will kill the transfer
and we'll report failure. This is the average transfer speed over the
delta defined by CURLOPT_LOW_SPEED_TIME, so setting a low value here
shouldn't bother folks using 14.4k dial-up.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses FS#24292. If one does the bad thing of not checking
pm_errno after calling set_dbpath(), you may not realize the
initialization process went wrong and calling trans_init() resulted in a
segfault. If we don't have a lockfile path, bail out and have
trans_init() fail.
Also remove a ALPM_LOG_FUNC call that was causing pm_errno to return "no
handle"; this was due to a log call in the handle setup (whereby the log
attempts to use a callback attached to the handle).
Signed-off-by: Dan McGee <dan@archlinux.org>
Issue FS#24230. If a symlink is broken and included in the removal
process of a package, we blew up and segfaulted due to
alpm_compute_md5sum() returning NULL and then performing a strcmp()
operation.
Signed-off-by: Dan McGee <dan@archlinux.org>
The addition of the DB version check introduces a lag time between the
lockfile creation and the transaction initialization. In cases where the
local DB is large enough and/or the user's disk is slow enough, this
time is significant enough that its possible for a user to send a SIGINT
and leave behind a db.lck file.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
It's your own damn fault if you do this, and this code is remnants from
an old time when we weren't very good at coding.
Signed-off-by: Dan McGee <dan@archlinux.org>
This needlessly prevents the easiest way available of clearing any of these
values. We can also do the same for the 'arch' value.
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently we have one call that has all sorts of crazy behavior and doesn't
make a whole lot of sense. Go from one method to the normal four methods we
have for all of our other lists we use in the library to make it a lot
easier for a frontend to manipulate server lists.
Signed-off-by: Dan McGee <dan@archlinux.org>
The switch from FUNCTION to DEBUG was ill-advised inside the local
database load. Instead, add a DEBUG level logger to both local and sync
database loads that shows the number of packages processed.
Signed-off-by: Dan McGee <dan@archlinux.org>
We were erroring out in the case where a first (possibly bogus) mirror
would cause the download process to return a failure code, even though
subsequent servers had the file.
Signed-off-by: Dan McGee <dan@archlinux.org>
This started off removing the "(void)foo" hacks to work around
unused function parameters and ended up fixing every warning
generated by -Wunused-parameter.
Dan: rename to UNUSED.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We had a lot of similar looking code that we can collapse down into a
function. This also fixes errors seen when turning on some gcc warnings
and implicitly casting away the const-ness of the string. Free the list
when we are done with it as well.
Also, fix a logic error where we should be checking with &&, not ||.
Signed-off-by: Dan McGee <dan@archlinux.org>
This makes it possible to omit usage of -lgpgme, just as we can do for
-lcurl and -lcrypto.
Thanks to Rémy Oudompheng for an initial stab at this.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add some lookup functions for nice names for the various types used by
the library, and remove some fields that are of little use to us in the
debug output. This should make looking at key loading and verification a
bit easier, especially in determining what makes up our good and bad
criteria.
Signed-off-by: Dan McGee <dan@archlinux.org>
Both md5sum verification and PGP verification can and should be done at
package load time. This allows verification to happen as early as
possible for packages provided by filename and loaded in the frontend,
and moves more stuff out of sync_commit that doesn't really belong
there. This should also set the stage for simplified parallel loading of
packages later down the road.
Signed-off-by: Dan McGee <dan@archlinux.org>
More stuff going on in the pre-committing stage that can be in a static
method to make things a bit more clear.
Signed-off-by: Dan McGee <dan@archlinux.org>
This part is almost completely self-contained, except building the list
of delta filenames that we use later to check their md5sums. Refactor it
into a static method so we can bring most of the code in sync_commit
closer to the method name.
Signed-off-by: Dan McGee <dan@archlinux.org>
Given that we offer no transparency into the pmpgpsig_t type, we don't
really need to expose it outside of the library, and at this point, we
don't need it at all. Don't decode anything except when checking
signatures. For packages/files not from a sync database, we now just
read the signature file directly anyway.
Also push the decoding logic down further into the check method so we
don't need this hanging out in a less than ideal place. This will make
it easier to conditionally compile things down the road.
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than go through all the hassle of doing this ourselves, just let
GPGME handle the work by passing it a file handle.
Signed-off-by: Dan McGee <dan@archlinux.org>
The various "level" values were a bit crazy to decipher, and we were
doing some very interesting comparisons in certain places. Break it out
into two parameters instead so we can seperate the type from the extra
information display, and do things accordingly.
Nothing changes with the display of any of the five types we currently
show: -Si, -Sii, -Qi, -Qii, -Qip.
Something to note- we should expose the PKG_FROM enum type somehow, this
patch leaves the door open to do that quite easily.
Signed-off-by: Dan McGee <dan@archlinux.org>
There's a lot of related moving parts here:
* Iteration through mirrors is moved back to the calling functions. This
allows removal of _alpm_download_single_file and _alpm_download_files.
* The download function gets a few more arguments to influence behavior.
This allows several different scenarios to customize behavior:
- database
- database signature (req'd and optional)
- package
- package via direct URL
- package signature via direct URL (req'd and optional)
* For databases, we need signatures from the same mirror, so structure
the code accordingly.
Some-inspiration-from: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The allow_resume is the start of the fix to the "don't ever resume
database downloads" problem, as well as being useful for '.sig'
downloads as well. For now, we say "always allow resume", but this will
eventually get pushed down as necessary.
Error checks are reworked in order to correctly error out when a file is
not found on the remote end and reports 0 bytes downloaded. In addition,
the two error messages printed are now different as one reports a more
specific error message provided via the cURL error buffer.
Some example output from an -Sy run with [testing], [community],
[community2], [eee], and [nonexistant] defined as repos. [community2]
and [nonexistant] are both invalid, one using FTP and one using HTTP.
:: Synchronizing package databases...
testing is up to date
community is up to date
error: failed retrieving file 'community2.db' from ftp.archlinux.org : Given file does not exist
error: failed to update community2 (FTP: couldn't retrieve (RETR failed) the specified file)
eee is up to date
error: failed retrieving file 'nonexistant.db' from code.toofishes.net : The requested URL returned error: 404
error: failed to update nonexistant (HTTP response code said error)
Signed-off-by: Dan McGee <dan@archlinux.org>
The value PM_PGP_VERIFY_UNKNOWN is reserved to error cases,
now that the signature verification level defaults to the
globally set level. The only error case is when handle == NULL,
which is false in the context of _alpm_sync_commit().
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This does touch a lot of things, and hopefully doesn't break things on
other platforms, but allows us to also clean up a bunch of crud that no
longer needs to be there.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the standard, and we have had a few of these introduced lately
that should not be here.
Done with:
find -name '*.c' | xargs sed -i -e 's#if (#if(#g'
find -name '*.c' | xargs sed -i -e 's#while (#while(#g'
Signed-off-by: Dan McGee <dan@archlinux.org>
* add _alpm_db_get_sigverify_level
* add alpm_option_{get,set}_default_sigverify
And set the default verification level to OPTIONAL if not set otherwise.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This makes it absolutely dead easy to ensure off_t has the same length
in all compilation units. I just spent 2.5 hours bashing my head on an
issue related to this so damn it I'm fixing it for good.
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently the only error case then when handle == NULL.
However several handle functions return -1 on this error,
and a uniform API makes things simpler.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
For a package to be loaded from any of our backends, these two fields
are always required upfront. Due to this fact, we don't need them to be
backend-specific operations and can just refer to the field directly.
Additionally, our static (and thus private) cache package accessors had
a NULL check on pkg before returning the relevant field. Eliminate this
since they only way they are ever called is via the packages attached
callback struct, which would have caused the NULL pointer dereference in
the first place.
Signed-off-by: Dan McGee <dan@archlinux.org>
So we only need one copy in the final library, not one copy per time
used. Ensure all necessary includes are in place (especially to get the
right size of off_t each time it is compiled) by including "config.h" in
the new graph.c.
One small adjustment here makes the graph_free code more robust- ensure
we don't have invalid pointers after each iteration by looking at the
parents and children and adjusting accordingly.
Signed-off-by: Dan McGee <dan@archlinux.org>
Ensure we only have one- this looks like the result of a bad merge from
old 2008 signing code with the current stuff which has changed quite a
bit.
Originally-seen-by: Rémy Oudompheng <remyoudompheng@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The current state of the code does not allow to see immediately
that it returns a list of pmdepmissing_t structures.
Signed-off-by: Dan McGee <dan@archlinux.org>
Some systems, like FreeBSD might define both statfs
and statvfs: however if statvfs exists whereas getmntinfo()
uses a statfs struct, the current ifdefs would select the wrong
line of code.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
There is no reason to not support versions of libarchive that lack
ARCHIVE_COMPRESSION_UU. Distributions should work properly without
this.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
That's a funny one, building with optimization levels (with both gcc and
clang) caused open_mode to always be set to "ab", which worked.
This was spotted both with clang-analyzer, and by Jakob who reported a
segfault as he was using an un-optimized build.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
So we don't segfault when calling this on be_sync loaded packages. They
return logical values as much as possible for indicating there is no
changelog available.
Signed-off-by: Dan McGee <dan@archlinux.org>
We didn't do this sanity check before trying to open an archive. If
the alpm dbpath wasn't set, the sync database dbpath would be NULL,
causing us to hang indefinitely in archive_read_open_filename() rather
than erroring out.
We already have a corresponding check in local_db_populate().
The following program will test this case, and hangs before this patch
without the call to set_dbpath:
int main(int argc, char *argv[]) {
alpm_initialize();
// alpm_option_set_dbpath("/var/lib/pacman/");
pmdb_t *core = alpm_db_register_sync("core");
pmpkg_t *pkg = alpm_db_get_pkg(core, "pacman");
return 0;
}
Signed-off-by: Dan McGee <dan@archlinux.org>
We had two functions that were oh so similar but slightly different. We
can combine them and add some conditional operation stuff to decide what
to return.
Signed-off-by: Dan McGee <dan@archlinux.org>
Many alpm_option_get/set_*() functions already check this
and set pm_errno to the right value, but not all, so
this improves consistency.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This greatly simplifies the cleanup fallthrough in our download function
and we'll be able to reuse this for signatures.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Based on the fact that localf always points to the same file, there's no
need to code in multiple fopen calls with varying results. Instead,
track the desired file open mode and make a single call to fopen.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Create a more general function that allows appending a suffix to a
filepath.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This lets us determine the real size of the file on disk so that we can
properly bump the progress bar when we're resuming a download.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses FS#23424. The -dd backend code was introduced in commit
b6ec9019d7, and unfortunately the munged depend used for comparison did
not carry through to the eventual display of this version. To fix this,
we undo some of the depcmp_tolerant() business introduced, and instead
make a new pmdepend_t object if necessary when the no dependency version
flag is set. This results in the correct depend being copied to the
missing depend passed onto the frontend.
Signed-off-by: Dan McGee <dan@archlinux.org>
pacman 3.5.0 removed alpm_db_register_local, so calling
alpm_db_unregister_all leaves the front end in a position where there's
no local db, and no way to re-register it.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
After updating a database, remove the old signature to prevent it
being used in validation if the new signature fails to download.
Signed-off-by: Allan McRae <allan@archlinux.org>
If signature verification is needed, attempt to download a signature
file for a repo when it is updated. Return an error if unable to
download signature only when checking is mandatory, or if signature is
invalid.
TODO: At the moment the database signature is only checked on download.
Should we do anything with a database if it fails to be verified to prevent
its future usage?
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a pmpgpsig_t struct to the database entry struct and functions for
the lazy loading of database signatures. Add a function for checking
database signatures, reusing (and generalizing) the code currently used
for checking package signatures.
TODO: The code for reading in signature files from the filesystem is
duplicated for local packages and database and needs refactoring.
Signed-off-by: Allan McRae <allan@archlinux.org>
Our curl callback does a whole lot of work for nothing if the front end
never defined a callback to receive the data we'd calculate for it.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
CURLINFO_HTTP_CODE is deprecated in favor of CURLINFO_RESPONSE_CODE.
Both yield the same values.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The files we transfer are generally compressed already, so this just
adds unnecessary overhead.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Use a static variable to effectively track the initialization state of
the progress callback via the last byte amount reported as downloaded by
libcurl.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* introduces new macro in util.h (DOUBLE_EQ) for properly comparing
floating point values
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the (possibly still temporary) output generated during signature
checking into the --debug output.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Once we do this, add support for VerifySig to pactest. We just check if
the repo name contains Always, Never or Optional to determine the value
of VerifySig. The default is Never. pacman uses Always by default but
this is not suitable for pactest.
Original-work-by: shankar <jatheendra@gmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We pass in a db object, so no need to go looking for it in the list on
the handle. This is a remnant of when we passed in a treename, more than
likely.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will serve as the home directory we pass to GPGME when making calls so
we can have a libalpm-utilized keyring.
Signed-off-by: Dan McGee <dan@archlinux.org>
If a .sig file sits side-by-side on the filesystem with a package archive,
read it in during the package struct creation process so we can verify it at
a later time if necessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a new field to the package struct to hold PGP information and
instruct db_read to pick it up from the database. It is currently unused
internally but this is the first step.
Due to the fact that we store the PGP sig as binary data, we need to store
both the data and the length so we have a small utility struct to assist us.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
We will need these for GPG functionality (decoding the base64 encoded
signature stored in the databases).
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Implements FS#23103. Also modify libalpm so it ignores this value
without any warning as we know it is likely to exist.
Signed-off-by: Dan McGee <dan@archlinux.org>
Wrap lines of long length, noticed while creating and messing around
with some of the other maint branch patches.
Signed-off-by: Dan McGee <dan@archlinux.org>
Noticed with the openoffice/libreoffice replacement scheme where many
packages are listed as replacements to one package, thus electing it for
removal multiple times. Ensure a given package is not already present
before placing it in the removal list.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a rather serious data corruption issue that luckily manifested
itself today in a noticable way. A package in testing had replaces
entries read in as ["%RE pkgname", "%RE"] which was clearly wrong. This
happens when we hit the end of an archive block, do not have a newline,
and have to continue reading from the next block to complete the line.
Signed-off-by: Dan McGee <dan@archlinux.org>
Drawing progress bars before calling curl_easy_perform() is needless as
the curl progress callback is called with zero progress before actually
downloading the file anyways. Fixes display of "0%" progress bars when
sync'ing package databases that are already up to date.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This was discussed and more or less agreed upon on the mailing list. A
huge checkin, but if we just do it and let people adjust the pain will
end soon enough. Rebasing should be relatively straighforward for anyone
that sees conflicts; just be sure you use the new return style if
possible.
The following semantic patch was used to do the change, along with some
hand-massaging in order to preserve parenthesis where appropriate:
The semantic match that finds this problem is as follows, although some
hand-massaging was done in order to keep parenthesis where appropriate:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression a;
@@
- return(a);
+ return a;
// </smpl>
A macros_file was also provided with the following content:
Additional steps taken, mainly for ASSERT() macros:
$ sed -i -e 's#return(NULL)#return NULL#' lib/libalpm/*.c
$ sed -i -e 's#return(-1)#return -1#' lib/libalpm/*.c
Signed-off-by: Dan McGee <dan@archlinux.org>
We erroniously dropped the call to _alpm_delta_parse() when macro-izing,
causing segfaults for repos that provide deltas. Addresses FS#23314.
Signed-off-by: Dan McGee <dan@archlinux.org>
Partially addresses the "why doesn't CheckSpace work in a chroot" issue.
We can't make it work, but we can at least detect when it won't work by
checking for a partition for our given installation root. If we can't
determine the mountpoint for this, bail out with an error.
Signed-off-by: Dan McGee <dan@archlinux.org>
this is just some debuggery to allow pacman to operate with both fetch
and curl at the same time. use the PACMANDL variable to control which
library is used.
Signed-off-by: Dave Reisner <d@falconindy.com>
This is a feature complete re-implementation of the fetch based internal
downloader, with a few improvements:
* support for SSL
* gzip and deflate compression on HTTP connections
* reuses a single connection over the entire session for lower resource
usage.
Signed-off-by: Dave Reisner <d@falconindy.com>
Add PM_ERR_LIBCURL to error enum and handle case in error.c by returning
curl_easy_strerror() based on the error number carried by the gloabl alpm
handle.
Signed-off-by: Dave Reisner <d@falconindy.com>
no actual code changes here. change preprocessor logic to include
get_tempfile, get_destfile, signal handler enum, and the interrupt
handler logic when either HAVE_LIBCURL or HAVE_LIBFETCH are defined.
Signed-off-by: Dave Reisner <d@falconindy.com>
Do this in preparation for implementing similar curl based
functionality. We want the ability to test these side by side.
Signed-off-by: Dave Reisner <d@falconindy.com>
Adding the CURLcode is necessary in order to return an error string from
pm_error. Unlike libfetch, curl returns numerical error numbers and does
not maintain a staticly allocated string with the last error generated.
Adding the curl object itself to the handle is advantageous (and
encouraged by curl_easy_perform(3)) because the handle is reusable for
successive operations. This cuts back on overhead when downloading
multiple files in a single transaction.
Signed-off-by: Dave Reisner <d@falconindy.com>
repo-add can add a "files" entry into the sync db. Currently we
do nothing with this file, so explicitly skip it to prevent
unknown database file warnings.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Our keywords were all screwed up in this regard. Fix it so our
ngettext() shortcut calls are actually recognized and respected.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#23090, a rather serious problem where the user was completely
unable to read the local database. Even if entry->d_type is available,
the given filesystem providing it may not fill the contents, in which
case we should fall back to a stat() as we did before. In this case, the
filesystem was XFS but there may be others.
Signed-off-by: Dan McGee <dan@archlinux.org>
A lot of these were places that should have used the same message but
didn't, or were very easy to convert to using the same message and
letting some of the burden off of the translators.
Signed-off-by: Dan McGee <dan@archlinux.org>
Ensure we have a local DB version that is up to par with what we expect
before we go down any road that might modify it. This should prevent
stupid mistakes with the 3.5.X upgrade and people not running
pacman-db-upgrade after the transaction as they will need to.
Signed-off-by: Dan McGee <dan@archlinux.org>
We only call these from the transaction init and teardown, so move them
to that file, mark them static, and push more of the logic of handle
manipulation into these functions.
Signed-off-by: Dan McGee <dan@archlinux.org>
According to FOPEN(3), using fclose on an fdopen'd file stream also
closes the underlying file descriptor. This happened in _alpm_lckmk
(util.c), which meant that when alpm_trans_release closed it again, the
log file (which reused the original file descriptor) was closed instead.
Signed-off-by: Jonathan Conder <jonno.conder@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
There's no API functions exposed which allow manipulation of this type,
so remove it from public view. Also, rename the public and private
alpm_db_get_pkgcache symbol to alpm_db_get_pkgcache_has.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows error messages emitted by the frontend to be a bit more
descriptive and not have the annoying "well why didn't you tell me that
the first time" problem. If a package had multiple missing deps, we
would bail on the first one before rather than finish processing all
missing dependencies, and only print one error message. Instead,
continue through this entire set of missing deps and append all eventual
errors.
The added pactest tests this case, as the to be installed package has
two missing dependencies. However, pactest does not actually test or see
the difference in output from before and after, so it passes in both
cases, but it is clearly visible in the logs.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is old code that has since gone stale; we no longer ever add
anything to this list so no need to keep it around and check the
contents during extraction.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Make conflict_isin() static; it is used nowhere else.
* Remove does_conflict(): it turns out to be replaceable by a single call to
_alpm_depcmp(). By pushing it up, we can reduce calls to _alpm_splitdep()
from 60,368 to 16,940 during one test -Su operation I ran.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Use stat() and not lstat(); we don't care for the size of the symlink if
it is one, we want the size of the reference file.
* FS#22896, fix local database estimation on platforms that don't abide by
the nlink assumption for number of children.
* Fix a missing newline on an error message.
Signed-off-by: Dan McGee <dan@archlinux.org>
Change _alpm_graph_new() to use CALLOC to avoid explicit zeroing out of fields
in pmgraph_t.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Turn it into an enum rather than a boolean, and use a bitmask like we do for
reading DB entries. The relevant flag is turned on in our two calculate
loops, and anything reading the used flag later can decided which flag (or
either) is relevant.
This will allow the read-only partition code to be triggered on a
remove-only operation, e.g. if /boot was read-only and one tried to remove
grub in a sync transaction. Of course, right now, we don't actually run the
diskspace check code in the '-R' codepath.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a bit of a stopgap solution for the problem, but an easier one than
revamping the file conflict checking code to support the same stuff. Using
some more gross autoconf magic, figure out which struct field we need to
look at to determine read-only status and store that on our mountpoint
struct. If we find out we needed this partition after calculating size
requirements, then toss an error.
Signed-off-by: Dan McGee <dan@archlinux.org>
In the getmntinfo() section, the local variable mnt doesn't exist; this
would have caused a compile error if I had tested the code on such a
platform. Unify both codepaths to just run strlen() on the already copied
mount path instead.
Signed-off-by: Dan McGee <dan@archlinux.org>
In packages, our description file contains:
key = value is here
type entries, and we passed "key " and " value is here" to our strtrim
function, causing us to always memmove the value portion to remove the
space. Since this is a throwaway buffer, do the advancing on our own before
trimming to save the need to shift memory around; "value is here" will now
be passed and strtrim will be responsible for trailing whitespace.
Signed-off-by: Dan McGee <dan@archlinux.org>
We did this in some but not all cases, assuming the 0 value coming out of
libarchive would not be a problem. However, this does not work for "fake"
filesystems such as rpc_pipefs, which reports a free block and total block
count of zero.
Fix this by not ever counting symlinks or directories, and adding a note
explaining that if we someday do count directories, their size needs to be
attributed to the proper place.
This patch also includes a few cleanups/performance tweaks- avoid calling
strlen() on the mountpoint directory string as much by storing this size in
our mountpoint struct, and push the snprintf() call up to the calculate
functions since we were already doing it here in the remove case.
Signed-off-by: Dan McGee <dan@archlinux.org>
The overlapping code in _alpm_pkghash_add() and _alpm_pkghash_add_sorted()
are now in a new static function pkghash_add_pkg(). This function has a
third flag parameter which determines whether the package should be added in
sorted order.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
In sync_db_populate() and local_db_populate(), a NULL db->pkgcache is not
caught, allowing the functions to continue instead of exiting.
A later alpm_list_msort() call which uses alpm_list_nth() will thus traverse
invalid pointers in a non-existent db->pkgcache->list.
pm_errno is set to PM_ERR_MEMORY as _alpm_pkghash_create() will only return
NULL when we run out of memory / exceed max hash table size. The local/sync
db_populate() functions are also exited.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
When reading the "desc" file in _alpm_local_db_read(), some
strings are trimmed and checked for length > 0 before their
use/duplication subsequently. They are then trimmed again
when there is no need to.
The following code snippet should illustrate it clearly:
while(fgets(line, sizeof(line), fp) &&
strlen(_alpm_strtrim(line))) {
char *linedup;
STRDUP(linedup, _alpm_strtrim(line), goto error);
info->groups = alpm_list_add(info->groups, linedup);
}
This patch removes the redundant _alpm_strtrim() calls in
_alpm_local_db_read() such as the one inside the STRDUP shown
above.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
PM_ERR_WRITE is defined in alpm.h but not handled in
alpm_strerror(). This patch corrects that.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We located files in a few places but didn't check if they were files or
directories. Ensure they are actually files using stat() and S_ISREG(); this
showed itself when trying to download to the directory name itself in
FS#22645.
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than potentially move every item to the next NULL, attempt to move at
most one item at a time by iterating backwards from the NULL location in the
hash array. If we move an item, we repeat the process on the now shorter
"chain" until no more items need moving.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This takes in the list and a list item, and does the pointer dance necessary
to remove it from the list regardless of whether it is first, last, or
somewhere in the middle. It is useful for callers that already know what
item needs to be removed and have a pointer to it rather than doing a search
by data that the plain alpm_list_remove() does.
Refactor alpm_list_remove() to use this function as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fully removes a package from the hash. Also unify prototype with
removal from an alpm_list_t, fixing issues when removing a package
from the pkgcache.
Signed-off-by: Allan McRae <allan@archlinux.org>
While probably still not optimal in terms of everyday usage in
pacman, this reduces the absolute size increase to "more reasonable"
levels. For databases greater than 5000 in size, the minimum size
increase is used which is still on the order of a 10% increase.
Signed-off-by: Allan McRae <allan@archlinux.org>
Check that the requested size of a pkghash is not beyond the maximum
prime. Also check for successful creation of a new hash before
rehashing.
Signed-off-by: Allan McRae <allan@archlinux.org>
Since the sync database never changes size once we initialize it, we
allow it to be filled a bit more. This reduces the overall memory
footprint needed by the hash table.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to get through the rehash required by smoke001 and pass
all pactests. It is by no means the best or most efficient
implementation but it does do the job.
Signed-off-by: Dan McGee <dan@archlinux.org>
Read the package information for sync/local databases into a pmpkghash_t
structure.
Provide a alpm_db_get_pkgcache_list() method that returns the list from
the hash object. Most usages of alpm_db_get_pkgcache are converted to
this at this stage for ease of implementation. Review whether these are
better accessing the hash table directly at a later stage.
Signed-off-by: Allan McRae <allan@archlinux.org>
This works for both local and sync databases in slightly different ways. For
the local database, we can use the directory hard link count on the local/
folder. For sync databases, we use the archive size coupled with some
computed average per-package sizes to determine an estimate.
This is currently a dead assignment once calculated, but could be used to
set the initial size of a hash table.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Noted in FS#22697. When I factored out _alpm_parsedate() into a common
function, I didn't move the <locale.h> include properly, causing a build
failure when NLS is disabled and this header isn't automatically included
everywhere.
Signed-off-by: Dan McGee <dan@archlinux.org>
This flag allows to disable version checking in dependency resolving
code.
depcmp_tolerant respects the NODEPVERSION flag but we still keep the
original strict depcmp. The idea is to reduce the impact of the
NODEPVERSION flag by using it in fewer places.
I replaced almost all depcmp calls by depcmp_tolerant in deps.c (except
in the public find_satisfier used by deptest / pacman -T), but I kept
depcmp in sync.c and conflict.c
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
It's likely that these interfaces will break sooner or later, now that
pacman no longer uses them.
So better force the two people who use them to migrate their code to the
new add_pkg/remove_pkg interface, which is very easy anyway.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Old interface is marked as deprecated:
int alpm_sync_target(char *target);
int alpm_sync_dbtarget(char *db, char *target);
int alpm_add_target(char *target);
int alpm_remove_target(char *target);
New recommended interface:
int alpm_add_pkg(pmpkg_t *pkg);
int alpm_remove_pkg(pmpkg_t *pkg);
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
For consistency with alpm_add_pkg.
The new recommended interface is alpm_add_pkg / alpm_remove_pkg, all
others interfaces are deprecated.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
This group function is meant to help group handling from frontend : it
scans all dbs, handling ignored packages and duplicate members (the
first repo where a member is found has the priority).
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
This new function is meant to deprecate all existing
sync/add target functions :
int alpm_sync_target(char *target);
int alpm_sync_dbtarget(char *db, char *target);
int alpm_add_target(char *target);
Rather than dropping these 3 interfaces, it might be better to rewrite
them using alpm_add_pkg for now.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
This is a public interface for resolvedep. It looks nicer to expose it
this way rather than through sync_target.
This function can also be helpful for external tools as it should give
good results close to how pacman select a package for satisfying a given
dep.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
If there are multiple providers in one db, pacman used to just stop at
the first one (both during dependency resolution or for pacman -S
'provision' which uses the same code).
This adds a new conversation callback so that the user can choose which
provider to install. By default (user press enter or --noconfirm), the
first provider is still chosen, so for example the behavior of sync402
and 403 is preserved. But at least the user now has the possibility to
make the right choice in a manual run.
If one of the provider is already installed, it is picked for
reinstall/upgrade, so that provision 002/003 pactest now pass.
$ pacman -S community/smtp-server
:: There are 3 providers available for smtp-server:
1) courier-mta 2) esmtp 3) exim
Which one do you want to install?
Enter a number (default=1):
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Perform the cheap struct and string setup of the local DB at handle
initialization time to match the teardown we do when releasing the handle.
If the local DB is not needed, all real initialization is done lazily after
DB paths and other things have been configured anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
We explicitly place 'pkgbase' (and used to place 'force') fields inside
PKGINFO files, so ignore them silently instead of printing an error for
them. Also make the error message for unknown keys actually contain the key.
Signed-off-by: Dan McGee <dan@archlinux.org>
We were returning a package error code rather than a DB one, and we
would leak the archive memory if the database file didn't exist.
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead, go the same route we have always taken with version-release in
libalpm and treat it all as one piece of information. Makepkg is the only
script that knows about epoch as a distinct value; from there on out we will
parse out the components as necessary.
This makes the code a lot simpler as far as epoch handling goes. The
downside here is that we are tossing some compatibility to the wind;
packages using force will have to be rebuilt with an incremented epoch to
keep their special status.
Signed-off-by: Dan McGee <dan@archlinux.org>
Adapting from RPM, follow the [epoch:]version[-release] syntax. We can also
borrow some of their parsing code for our purposes (thanks!). Add some new
tests to our vercmp shell script tester for epoch comparisons, and then make
the code work with these newfangled epoch specifiers.
Signed-off-by: Dan McGee <dan@archlinux.org>
Since it is the same string. Done with some bash looping and sed magic.
for src in po/*.po; do
echo $src
newtrans=$(grep -A1 "msgid.*$1" $src | tail -n1)
newtrans=${newtrans//\\/\\\\}
echo "$newtrans"
fname=${src##*/}
dest=lib/libalpm/po/$fname
sed -i -e "/msgid.*$1/{N; s/msgstr.*$/$newtrans/}" $dest
done
Signed-off-by: Dan McGee <dan@archlinux.org>
In most (all?) cases, we will process all files for a given sync database
entry sequentially. The code currently does an _alpm_pkg_find() for every
file in the database, but we had the "current" package readily available.
Shift some local variables around a bit to expose this to sync_db_read() and
use it if the package is the correct one.
On my system, this cuts calls to _alpm_pkg_find() from 20,769 to 10,349
calls during a -Qu operation, and results in a ~30% speedup of the same
operation (0.35 sec -> 0.27 sec). This benefit should be apparent anywhere
we read in the full contents of the sync databases.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't need to create a temporary copy of the string if we are smart with
our pointer manipulation and string copying. This saves a bunch of string
duplication during database parsing, both local and sync.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove the need for an unconditional string duplication by using pointer
arithmetic instead, and strndup() instead of an unspecified-length strdup().
This should reduce memory churn a fair amount as this is called pretty
frequently during database loads.
Signed-off-by: Dan McGee <dan@archlinux.org>
When installing packages from a file, the integrity check count
stays at (0/x) complete. This ensures it is bumped to (x/x) at
the end of the process.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is essentially a backport/cherry-pick of commit 33240e87b9 from
master, but has to be done by hand because the DB format has diverged. Read
more in the commit message used there, which follows.
Due to the way we funk around with package data loading, we had a condition
where the filelist got doubled up because it was loaded twice.
Packages are originally loaded with INFRQ_BASE. In an upgrade/sync, the
package is checked for file conflicts next, leaving us in an "INFRQ_BASE |
INFRQ_FILES" state. Later, when committing a single package, we have an
explicit call to _alpm_local_db_read() with INFRQ_ALL as the level. Because
the package's level did not match this, we skipped over our previous "does
the incoming level match where I'm at" shortcut, and continued to load
things again, because of a lack of fine-grained checking for each of DESC,
FILES, and INSTALL.
The end result is we loaded the filelist twice, causing our remove logic to
iterate twice over the installed files, spewing a bunch of "cannot find file
X" messages.
Fix the problem by doing a bit more bitmasking logic throughout the load
method, and also fix the sanity check at the beginning of the function- this
should *only* be used for local packages as opposed to the "not a package"
check that was there before.
Signed-off-by: Dan McGee <dan@archlinux.org>
After all the debate as to what to do on maint, we are going to end up just
incorporating epoch into the version string, so we don't need this separate
field at all. Revert commit 5c8083baa4 and also kill the force flag we were
recording here as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
Due to the way we funk around with package data loading, we had a condition
where the filelist got doubled up because it was loaded twice.
Packages are originally loaded with INFRQ_BASE. In an upgrade/sync, the
package is checked for file conflicts next, leaving us in an "INFRQ_BASE |
INFRQ_FILES" state. Later, when committing a single package, we have an
explicit call to _alpm_local_db_read() with INFRQ_ALL as the level. Because
the package's level did not match this, we skipped over our previous "does
the incoming level match where I'm at" shortcut, and continued to load
things again, because of a lack of fine-grained checking for each of DESC,
FILES, and INSTALL.
The end result is we loaded the filelist twice, causing our remove logic to
iterate twice over the installed files, spewing a bunch of "cannot find file
X" messages.
Fix the problem by doing a bit more bitmasking logic throughout the load
method, and also fix the sanity check at the beginning of the function- this
should *only* be used for local packages as opposed to the "not a package"
check that was there before.
A debug log message was added to upgraderemove as well to match the one
already in the normal remove codepath.
Signed-off-by: Dan McGee <dan@archlinux.org>
libarchive eventually calls it anyway, but backtraces make a lot more sense
if we call it, as well as matching our precedent from alpm_pkg_load().
Signed-off-by: Dan McGee <dan@archlinux.org>
This is helpful anyway to the user, and should also be helpful to us if we
see problems cropping up in the check during development.
Also add a missing ->used = 0 initialization in the code path less taken.
Signed-off-by: Dan McGee <dan@archlinux.org>
Although they won't be the same in the gettext catalog because of the '\n'
we should still use the same text.
Signed-off-by: Dan McGee <dan@archlinux.org>
This can take a while too, and it is really easy to add the necessary
callback stuff for adding a progressbar.
Signed-off-by: Dan McGee <dan@archlinux.org>
These were just two small things I came across today and found could be
fixed or helpful, so I've added them and I'm not sure what else to bundle
them with. commit_count++
Signed-off-by: Dan McGee <dan@archlinux.org>
We were checking if a package existed locally, but then using the
incoming package to calculate removed size rather than the currently
installed package.
Also adjust the local variable in the replaces loop to make it more
clear that we are always dealing with local packages here.
Signed-off-by: Dan McGee <dan@archlinux.org>
All of these can be done with integer division; the only slightly
interesting part is ensuring we round up like before with calling the
ceil() function.
We can also remove the math library from requirements; now that the only
ceil() calls are gone, we don't need this anymore.
Signed-off-by: Dan McGee <dan@archlinux.org>
file_pkg_ops can be a static struct like in other backends, we just need
to initialize it at some point.
Dan: add initialization flag.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
None of these warn at the normal "-Wall -Werror" level, but casts do occur
that we are fine with. Make them explicit to silence some warnings when
using "-Wconversion".
Signed-off-by: Dan McGee <dan@archlinux.org>
There is a lot of swtiching between size_t and int for alpm_list sizes
in the codebase. Start converting these to all be size_t by adjusting
the return type of alpm_list_count and fixing all additional warnings
given by -Wconversion that are generated by this change.
Dan: a few more small changes to ensure things compile, adjusting some
printf format string characters to accommodate the larger size on x86_64.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
All functions that are limited to the local translation unit are
declared static. This exposed that the _pkg_get_deltas declaration
in be_local.c was being satified by the function in packages.c which
when declared static caused linker failures.
Fixes all warnings with -Wmissing-{declarations,prototypes}.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We use PATH_MAX everywhere by including limits.h so there is no
point in doing a check for it in a different header when dealing
with FreeBSD's libfetch.
Also, remove autoconf check for strings.h header as it is not used
anywhere.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
POSIX does not require PATH_MAX be defined when there is not actual
limit to its value. This affects HURD based systems. Work around
this by defining PATH_MAX to 4096 (as on Linux) when this is not
defined.
Also, clean up inclusions of limits.h and remove autoconf check for
this header as we do not use macro shields for its inclusion anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Just like we did for package name comparsions, if we add a depend name_hash
field on depend struct initialization, we can use it instead of doing a
string name comparison, saving us a lot of checks in the depcmp code.
Signed-off-by: Dan McGee <dan@archlinux.org>
Noticed when tweaking testdb, when we run _alpm_depcmp in loops and call it
seven million times, the strdup()/free() combo can add up. Remove the need
for any string duplication by some pointer manipulation and use of strncmp
instead of strcmp. Also kill the function logger and add an escape so we
don't needlessly retrieve the list of provides.
Signed-off-by: Dan McGee <dan@archlinux.org>
The old function was written in a time before we relied on it for nearly
every operation. Since then, we have switched to the archive backend and now
fast parsing is a big deal.
The former function made a per-character call to the libarchive
archive_read_data() function, which resulted in some 21 million calls in a
typical "load all sync dbs" operation. If we instead do some buffering of
our own and read the blocks directly, and then find our newlines from there,
we can cut out the multiple layers of overhead and go from archive to parsed
data much quicker.
Both users of the former function are switched over to the new signature,
made easier by the macros now in place in the sync backend parsing code.
Performance: for a `pacman -Su` (no upgrades available),
_alpm_archive_fgets() goes from being 29% of the total time to 12% The time
spent on the libarchive function being called dropped from 24% to 6%.
This pushes _alpm_pkg_find back to the title of slowest low-level function.
Signed-off-by: Dan McGee <dan@archlinux.org>
The amount of diskspace needed for a transaction can be less than
zero. Only test this against the available disk space if it is
positive, which avoids a comparison being made between signed and
unsigned types (-Wsign-compare).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Always declare a function with (void) rather than () when we expect
no arguements. Fixes all warnings with -Wstrict-prototypes.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This simplifies a lot of the repetative code and makes it obvious where the
tricky or different ones are (e.g. depends, dates). It also makes it
significantly easier to change the way this code works in the future.
There should be no functional change with this patch.
Signed-off-by: Dan McGee <dan@archlinux.org>
Saves a few bytes due to padding (256 -> 248 bytes), especially on x86_64,
so we get the overhead of our new hash field right back.
Signed-off-by: Dan McGee <dan@archlinux.org>
This results in huge gains to a lot of our codepaths since this is the most
frequent method of random access to packages in a list. The gains are seen
in both profiling and real life.
$ pacman -Sii zvbi
real: 0.41 sec -> 0.32 sec
strcmp: 16,669,760 calls -> 473,942 calls
_alpm_pkg_find: 52.73% -> 26.31% of time
$ pacman -Su (no upgrades found)
real: 0.40 sec -> 0.50 sec
strcmp: 19,497,226 calls -> 524,097 calls
_alpm_pkg_find: 52.36% -> 26.15% of time
There is some minor risk with this patch, but most of it should be avoided
by falling back to strcmp() if we encounter a package with a '0' hash value
(which we should not via any existing code path). We also do a strcmp once
hash values match to ensure against hash collisions. The risk left is that a
package name is modified once it was originally set, but the hash value is
left alone. That would probably result in a lot of other problems anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is prepping for the addition of a hash field to each package to greatly
speed up the string comparisons we frequently do on package name in
_alpm_pkg_find.
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than error out, this is easy enough. Looks quite similar to the code
in be_local for creating the local directory.
Signed-off-by: Dan McGee <dan@archlinux.org>
Whenever depends is needed from the local db, so is desc. The only
disadvantage to merging them is the additional time taken to read the
depends entries when they are not needed. As depends is in general
relatively small, the additional time taken to read it in will be
negligable. Also, merging these files will speed up local database
access due to less file seeks.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This should hopefully address some of the concerns raised in FS#11639 with
regards to continuing after filling the disk up.
Add some more checks and passing of error conditions between our functions.
When a libarchive warning is encountered, check if it is due to lack of disk
space and if so upgrade it to an error condition. A review of other
libarchive warnings suggests that these are less critical and can remain as
informative warning messages at this stage.
Note the presence of errors after extraction of an entire package is complete.
If so, we abort the transaction to be on the safe side and keep damage to a
minimum.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: make ENOSPC warning into an error]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than hiding these warnings, show them to the user as they happen.
This will prevent things such as hiding full filesystem errors (ENOSPC) from
the user as seen in FS#11639.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: adjust warning wording and add gettext calls]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Whether it be "desc", "depends", or "deltas", it really doesn't matter-
treat them all the same and have the ability to read any data from any file
in that list. This continues the work in a44c7b8956.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Use our normal return() function syntax
* Rework a few things to reduce number of casts
* Fix void function argument declaration
* Add missing gettext _() call
* Remove need for seperate malloc() of statvfs/statfs structure
* Unify argument order of static functions- mountpoints now always
passed first
* Count all files that start with '.' in a package against the DB
* Rename db to db_local in check_diskspace to clarify some code
* Fix some line wrapping to respect 80 characters
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Turn it into a configure-type typedef, which allows us to reduce the
amount of duplicated code and clean up some #ifdef magic in the code
itself. Adjust some of the other defined checks to look at the headers
available rather than trying to pull in the right ones based on
configure checks.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Checking disk space needed for a transaction can take a while so add
an informative progress bar.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Disk space checking is likely to be an unnecessary bottleneck to
people with reasonable partition sizes so add a configuration option
to allow it to be disabled/enabled as wanted.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Pull together the work of the previous commits to implement a check
for enough free space before performing an install transaction. Abort
if there is not enough free space with an appropriate pm_errno..
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Two helper function are added to calculate the disk usage from packages
that are either currently installed on the system or from a package
archive.
Some minor approximations have been made:
1. Size for directories is not considered when removing a package from the
filesystem to avoid multiple counting across packages. Also, these are
reported to take zero size while installing.
2. Symlinks are reported to contribute zero size towards removal as
libarchive reports them to have zero size for install.
3. Package data files (.PKGINFO, .INSTALL, .CHANGELOG) are counted towards
usage on dbpath on install, but their size is not counted on package
removal.
4. No handling of extra size needed for .pacsave/.pacnew files.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
For a given file, determine which mount point it is on or will be
installed to. Take into account that we might be using an alternative
installation root.
Add additional helper function added to sort mount point list for easier
matching.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a mount_point_list() function that attempts to portably obtain
a list of system mount points and a struct to hold needed mount point
information.
Abort the transaction if we are unable to determine the mount points.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Very basic prototyping for adding functionality to check free disk
space before performing package installs.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This macro is deemed unnecessary by even the autoconf guys, so we really
don't need to use it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We were including the header in a lot of places it is no longer used.
Additionally, use the correct autoconf macro for determining whether
d_type is available as a member: HAVE_STRUCT_DIRENT_D_TYPE.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a delta specific definition so it makes more sense to put
it in the delta specific header file.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow us to eventually combine the depends and desc entries
within the sync database.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When a -Sk or -Uk operation induced a removal of an existing local
package, --dbonly was not in effect and the files were all removed.
Fixing this behavior was already marked as TODO in database012 pactest
------------
TODO: I honestly think the above should NOT delete the original les, it
hould upgrade the DB entry without touching anything on the file stem.
E.g. this test should be the same as:
pacman -R --dbonly dummy && pacman -U --dbonly dummy.pkg.tar.gz
------------
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
[Dan: small coding style touchup]
Signed-off-by: Dan McGee <dan@archlinux.org>
Either we expose all low levels function dealing with pmdepend_t
(splitdep and depfree come to mind), or we don't.
Since none of the tools use depcmp, I chose to remove it. In the future,
we might want to expose higher level functions such as
alpm_find_satisfier, or just lower level functions like splitdep and
depfree together with depcmp.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This has been replaced by the more flexible alpm_find_satisfier
function, and alpm_deptest was completely unsused now.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
whatprovides and splitdep were removed, so depcmp alone is quite useless
now without splitdep, and deptest is not flexible enough.
Introduce a new alpm_find_satisfier which is hopefully more flexible,
this should make implementation of deptest very easy, and also help alpm
tools such as pactree.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch is only meant for 3.4.x. It prepares the place for the future
epoch-aware release.
All force packages that get reinstalled or upgraded will get an EPOCH
entry in the local database, and thus the new pacman with epoch won't
reinstall them by mistake on the first -Su.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
If we have a corrupted database, a package can come through without an arch,
causing the code to blow up when making strcmp() calls. It might even be
possible with perfectly valid database entries lacking an 'arch =' line.
This behavior was seen as at least one of the problems in FS#21668.
Ensure pkgarch is not null before doing anything further.
Signed-off-by: Dan McGee <dan@archlinux.org>
$ pacman -Rd kde-meta
Remove (15): kde-meta-kdewebdev-4.5-1 [0.00 MB] kde-meta-kdeutils-4.5-1 [0.00 MB]
kde-meta-kdetoys-4.5-1 [0.00 MB] kde-meta-kdesdk-4.5-1 [0.00 MB]
kde-meta-kdeplasma-addons-4.5-1 [0.00 MB] kde-meta-kdepim-4.5-1 [0.00 MB]
kde-meta-kdenetwork-4.5-1 [0.00 MB] kde-meta-kdemultimedia-4.5-1 [0.00 MB]
kde-meta-kdegraphics-4.5-1 [0.00 MB] kde-meta-kdegames-4.5-1 [0.00 MB]
kde-meta-kdeedu-4.5-1 [0.00 MB] kde-meta-kdebase-4.5-1 [0.00 MB]
kde-meta-kdeartwork-4.5-1 [0.00 MB] kde-meta-kdeadmin-4.5-1 [0.00 MB]
kde-meta-kdeaccessibility-4.5-1 [0.00 MB]
Total Removed Size: 0.06 MB
Do you want to remove these packages? [Y/n]
( 1/15) removing kde-meta-kdewebdev [------------------------] 100%
$ it stopped here..
On one side, libalpm did not initialize the progress bar at 0 percent.
So with meta-packages that have 0 files, there was only one progress bar
call with percent == 100.
On the other side, pacman callback kept track of the last percent that
it received. When there are only meta-packages, we always received only
100, so pacman believed the progress bar needed not update. Thus only
the first package was actually displayed.
A proper fix for the callback would be to keep track of last package
name to make sure the recorded prev percent applies.
But since we now specify that both Add and Remove should at least send
percent=0 at beginning and percent=100 at the end, there is no need
for that.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We still need to read force entry in epoch-aware pacman, so that when we
install an old force package, EPOCH gets written to the local db.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow for better control of what was previously the 'force' option
in a PKGBUILD and transferred into the built package.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove unnecessary parsing of fields not found in local desc files.
Leave %FORCE% parsing as this likely will make an appearance in desc
files in the future.
Signed-off-by: Allan McRae <allan@archlinux.org>
The splitname function is a general utility function and so is better
suited to util.h. Rename it to _alpm_splitname to indicate it is an
internal libalpm function as was the case prior to splitting local and
sync db handling.
Signed-off-by: Allan McRae <allan@archlinux.org>
These functions are only needed by be_local and were only promoted
to db.{h,c} as part of the splitting of handling the local and sync
dbs. Move them into be_local.c and make them static again.
Signed-off-by: Allan McRae <allan@archlinux.org>
Read in list of packages for sync db from tar archive.
Breaks reading in _alpm_sync_db_read and a lot of pactests (which
is expected as they do not handle sync db in archives...).
Signed-off-by: Allan McRae <allan@archlinux.org>
Put the db_operations struct to use and completely split the handling
of the sync and local databases.
Signed-off-by: Allan McRae <allan@archlinux.org>
The file be_files.c is "split" to be_local.c and be_sync.c in order
to achieve separate handling of sync and local databases.
Some basic clean-up of functions that are only of use for local or
sync databases has been performed and some rough function renaming
in duplicated code has been performed to prevent compilation errors.
However, most of the clean-up and final separation of sync and local
db handling occurs in following patches.
Signed-off-by: Allan McRae <allan@archlinux.org>
These will be needed for the handling of both local and sync database
caches, so put them in a common location.
Signed-off-by: Allan McRae <allan@archlinux.org>
Move splitname, checkdbdir, get_pkgpath into db.{h,c} as these will be
needed to parse both the local and sync databases during the initial
splitting. They will be moved out of db.{h,c} at to more appropriate
locations at a later stage.
Signed-off-by: Allan McRae <allan@archlinux.org>
It doesn't do a whole lot yet, but these type of operations will
potentially be different for the DBs we load.
Signed-off-by: Dan McGee <dan@archlinux.org>
Cache bullshit only has relevance to be_files, so move it there.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: BIG rebase]
Signed-off-by: Allan McRae <allan@archlinux.org>
Hopefully we've finally arrived at package handling nirvana, or at least
this commit will get us a heck of a lot closer. The former method of getting
the depends list for a package was the following:
1. call alpm_pkg_get_depends()
2. this method would check if the package came from the cache
3. if so, ensure our cache level is correct, otherwise call db_load
4. finally return the depends list
Why did this suck? Because getting the depends list from the package
shouldn't care about whether the package was loaded from a file, from the
'package cache', or some other system which we can't even use because the
damn thing is so complicated. It should just return the depends list.
So what does this commit change? It adds a pointer to a struct of function
pointers to every package for all of these 'package operations' as I've
decided to call them (I know, sounds completely straightforward, right?). So
now when we call an alpm_pkg_get-* function, we don't do any of the cache
logic or anything else there- we let the actual backend handle it by
delegating all work to the method at pkg->ops->get_depends.
Now that be_package has achieved equal status with be_files, we can treat
packages from these completely different load points differently. We know a
package loaded from a zip file will have all of its fields populated, so
we can set up all its accessor functions to be direct accessors. On the
other hand, the packages loaded from the local and sync DBs are not always
fully-loaded, so their accessor functions are routed through the same logic
as before.
Net result? More code. However, this code now make it roughly 52 times
easier to open the door to something like a read-only tar.gz database
backend.
Are you still reading? I'm impressed. Looking at the patch will probably be
clearer than this long-winded explanation.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: rebase and adjust]
Signed-off-by: Allan McRae <allan@archlinux.org>
Implement this seemingly simple change in package.h:
typedef enum _pmpkgfrom_t {
- PKG_FROM_CACHE = 1,
- PKG_FROM_FILE
+ PKG_FROM_FILE = 1,
+ PKG_FROM_LOCALDB,
+ PKG_FROM_SYNCDB
} pmpkgfrom_t;
which requires flushing out several assumptions from around the codebase
with regards to usage of the PKG_FROM_CACHE value. Make some changes where
required to allow the switch, and now the correct value should be set (via a
crude hack) depending on whether a package was loaded as an entry in a local
db or a sync db.
This patch underwent some big rebasing from Allan and Dan.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Move almost all of the caching related stuff into a single #define
(which should maybe even just be a static function) so we don't
duplicate logic all over the place. This also makes the code a heck of a
lot shorter and means further changes to this stuff don't have to touch
each and every getter function.
Signed-off-by: Dan McGee <dan@archlinux.org>
We weren't reading this in from our packages, thus causing us not to write
it out to our local database. Adding this now will help ease the upgrade
path for epoch later and not require reinstallation of all force packages.
Signed-off-by: Dan McGee <dan@archlinux.org>
On Linux and OS X, we can determine if an entry obtained through a readdir()
call is a directory without also having to stat it. This can save a
significant number of syscalls. The performance increase isn't dramatic, but
it could be on some platforms (e.g. Cygwin) so it shouldn't hurt to use this
unconditionally where supported.
Signed-off-by: Dan McGee <dan@archlinux.org>
I don't know what I tested in commit 3e7b90ff69, but it definitely wasn't
working as advertised. Fix the checks in the source code itself to match the
right define (HAVE_LIBFETCH), as well as make sure the configure check
defaults to looking for the library but not bailing if it could not be
found.
Signed-off-by: Dan McGee <dan@archlinux.org>
It touched up these a bit after it ran, so might as well check the changes
in so we don't have to deal with them again later.
Signed-off-by: Dan McGee <dan@archlinux.org>
Model it after the new OpenSSL check, and have it be a bit more useful. If
you do not explicitly pass a command line option, it will be linked if
available but will not error out if it is missing. Also bump the version to
that where connection caching was introduced as we use these new features in
the codebase.
Signed-off-by: Dan McGee <dan@archlinux.org>
I've noticed my Atom-powered laptop is dog-slow when doing integrity checks
on packages, and it turns out our MD5 implementation isn't near as good as
that provided by OpenSSL. Using their routines instead provided anywhere
from a 1.4x up to a 1.8x performance benefit over our built-in MD5 function.
This does not remove the MD5 code from our codebase, but it does enable
linking against OpenSSL to get their much faster implementation if it is
available on whatever platform you are using. At configure-time, we will
default to using it if it is available, but this can be easily changed by
using the `--with-openssl` or `--without-openssl` arguments to configure.
Signed-off-by: Dan McGee <dan@archlinux.org>
This gave at least a 10% improvement on a few tested platforms due to the
reduced number of read calls from files when computing the md5sum. It really
is just a precursor to another patch to come which is to use MD5 functions
that do the job a lot better than anything we can do.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is being checked in as 'pt' rather than 'pt_PT' as that is what
Transifex seems to want, and it is also the dominant choice of packages
already installed on my system when doing a count of the files located in
the /usr/share/locale translation directories.
Thanks for the new translation!
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#18770, and hopefully an occasional deadlock in my frontend as well.
For simplicity it redirects all scriptlet output through SCRIPTLET_INFO, and
all callbacks in the child process have been replaced for thread-safety.
Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The combination of tabs and spaces is annoying in any editor that
does not use a tab width of 2 spaces.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
From the fgets manpage:
fgets() reads in at most one less than size characters from stream and
stores them into the buffer pointed to by s. Reading stops after an EOF
or a newline. If a newline is read, it is stored into the buffer. A
'\0' is stored after the last character in the buffer.
This means there is no need at all to do 'size - 1' math. Remove all of that
and just use sizeof() for simplicity on the buffer we plan on reading into.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow downloads to reuse connections if possible, which could make
big differences on perceived FTP speed as the connection won't have to be
reestablished each time. For the most part, HTTP requests wouldn't be using
keep alive anyway so this won't have an effect there.
I'm not enthused about having to do this with the library initialization,
but there isn't a much better place due to the fact that the loop over
databases occurs on the frontend and not the backend.
Signed-off-by: Dan McGee <dan@archlinux.org>
We no longer use these anywhere outside of sync.c, so do the rename and add
static to their definition to meet our coding standards.
Signed-off-by: Dan McGee <dan@archlinux.org>
As reported in FS#20221, we don't always do the right thing when installing
a group and using the --needed option. This was due to the code pulling
packages based on what was already in the transaction's add list, but
completely ignoring the fact that we may have already seen and skipped this
same package in an earlier repository.
Add a list to the private _alpm_sync_pkg() function that allows us to have
this extra information so we don't mistakenly downgrade a package when using
--needed.
Signed-off-by: Dan McGee <dan@archlinux.org>
The sync db should be stored in the sync/ folder. This cleans up
DBPath to only have local/ and sync/ directories in it.
A nice side effect is that the db are now in the right place so we
can implement directly reading from them.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
With commit 5dffef78, the repo database always has a symlink
of the form reponame.db. Use that filename and let libarchive
determine the compression type.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Prevents compiler warnings when building with -D_FORTIFY_SOURCE=2
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Check that writing to destination file actually occurs in
_alpm_copyfile. Required adding a new error (PM_ERR_WRITE)
as none of the others appeared appropriate.
Prevents compiler warning when using -D_FORTIFY_SOURCE=2.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The casting of nread is safe as it is tested to be >0 when it is
initally assigned. It is also being implicitly cast in the fwrite
call in the line above.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than say we can't find the target after saying "No, I guess I don't
want to install this", we should make sure the ignored status gets passed
all the way through. This fixes FS#19866.
Pactest is also included that failed before due to the fact that we normally
treat an unfound package as a reason to exit with a non-zero status.
Signed-off-by: Dan McGee <dan@archlinux.org>
Follow the HACKING guidelines and always use != 0 or == 0 rather
than negation within conditional statements to improve clarity.
Most of these are !strcmp usages which is the example of what not
to do in the HACKING document.
Signed-off-by: Allan McRae <allan@archlinux.org>
Use strcoll to compare package names to provide output sorted
according to a users LC_COLLATE settings.
Signed-off-by: Andres P <aepd87@gmail.com>
[Allan: added commit message]
Signed-off-by: Allan McRae <allan@archlinux.org>
Fix the '\t' characters that got introduced by the last update of this
translation that should not have been there.
Signed-off-by: Dan McGee <dan@archlinux.org>
This puts us more in line with other projects that don't attach the country
code to the language code.
$ du -sh /usr/share/locale/nb*/LC_MESSAGES
3.5M /usr/share/locale/nb/LC_MESSAGES
132K /usr/share/locale/nb_NO/LC_MESSAGES
Signed-off-by: Dan McGee <dan@archlinux.org>
This puts us more in line with other projects that don't attach the country
code to the language code.
$ du -sh /usr/share/locale/sv*/LC_MESSAGES
7.2M /usr/share/locale/sv/LC_MESSAGES
60K /usr/share/locale/sv_SE/LC_MESSAGES
Signed-off-by: Dan McGee <dan@archlinux.org>
Thanks to CalimeroTeknik <calimeroteknik@free.fr> for providing many
corrections !
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch fixes the phonon/qt issue, if all to-be-upgraded packages are
explicit targets (ie. only not-yet-installed packages are pulled by
resolvedeps). This condition covers the most common situations, for example
it should hold with every -Su operation.
After this patch sync405.py passes, but sync406.py doesn't.
The work is inspired by the patch of Henning Garus, thanks for his work:
http://mailman.archlinux.org/pipermail/pacman-dev/2010-February/010429.html
(I moved the alpm_list_diff computation to sync.c in order to compute it
only once.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit df99495b82 pacman downloaded files from the first repo only,
and reported corrupted packages for all files from other repos.
The download_size was set to 0 for _all_ transaction packages after
downloading some files from the first repo. This code-block was moved to its
correct place.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The request of FS#12950 is implemented.
On the backend side, I introduced a new function, alpm_db_set_pkgreason(),
to modify the install reason of a package in the local database. On the
front-end side, I introduced a new main operation, -D/--database, which has
two options, --asdeps and --asexplicit. I documented this in pacman manual.
I've created two pactests to test -D: database001.py and database002.py.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
It isn't really necessary here and it helps us get rid of some link
pollution so we can have a slim vercmp binary.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will facilitate using this object file on its own in the vercmp tool
which will be done in a future commit. The net impact on the generated
binaries should not be noticeable after this commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
Just as we do in -Qi, we can compute required by information for sync
database packages. The behavior seems sane; for a given package, the -Sii
required by will show all packages in *any* sync database that require it.
Implements FS#16244.
Signed-off-by: Dan McGee <dan@archlinux.org>
Basically I'm the idiot that thought I could make it better and completely
forgot how freeing the contents of the original lists would screw up our
nice little diff extraction lists. This caused segfaults among other
problems. Last time I try to do that...
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff627ce26 in strcmp () from /lib/libc.so.6
(gdb) bt
Signed-off-by: Dan McGee <dan@archlinux.org>
Follow-up to the previous "Only extract new DB entries" patch; move the
partial extraction code inside one side of the loop so we can use the same
code for actually doing file extraction.
Signed-off-by: Dan McGee <dan@archlinux.org>
This implements FS#15198. The idea apparently came from Csaba Henk
<csaba-ml <at> creo.hu> which submitted a patch to Frugalware, so thanks to
him, even though I did not look at the code :)
The idea is to only extract folders for new packages into the package
database and clean up the old directories. This is essentially implementing
Xyne's "rebase" script within pacman.
If using -Syy, just remove and extract everything.
If using -Sy :
1. Generate list of directories in DB
2. Generate list of directories in archive
3. Compare both
4. Clean up old directories
5. Extract new directories
Original-work-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: fix compile error, s/int/size_t/]
Signed-off-by: Dan McGee <dan@archlinux.org>
We free'd the handle but didn't NULL out the global variable, leading to
problems if you try to reinitialize the library. Make sure we clean up after
ourselves.
Signed-off-by: Dan McGee <dan@archlinux.org>
download_internal is supposed to always set pm_errno but did not in many
cases.
The most important (and tested) change is the one concerning fetchStat. This
is typically where the code will fail when the network is down for example.
Before commit d2dbb04a9a, this fetchStat call did not exist and the
same kind of errors would be encountered in the fetchXGet call that follows.
I just copied the error printing to restore the old behavior.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Some users reported duplicated database entries in /var/lib/pacman/local/,
for example, both foo-1.0-1 and foo-2.0-1 subdirectories existed. (Bogus
3rd-party scripts, backup?) In this case pacman reported no error and its
behaviour was mysterious.
From now on, pacman detects this situation and prints an error message.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a bit embarrassing. For example:
$ pacman -Qi mesa
...
Required By : mesa mesa mesa mesa mesa mesa
Something is clearly not right, and the problem was introduced in commit
0bc961. Fix the issue by getting the package name off the correct variable.
Signed-off-by: Dan McGee <dan@archlinux.org>
Sorry for this being such a huge patch, but I believe it is necessary for
quite a few reasons which I will attempt to explain herein. I've been
mulling this over for a while, but wasn't super happy with making the
download interface more complex. Instead, if we carefully order things in
the internal download code, we can actually make the interface simpler.
1. FS#15657 - This involves `name.db.tar.gz.part` files being left around the
filesystem, and then causing all sorts of issues when someone attempts to
rerun the operation they canceled. We need to ensure that if we resume a
download, we are resuming it on exactly the same file; if we cannot be
almost postive of that then we need to start over.
2. http://www.mail-archive.com/pacman-dev@archlinux.org/msg03536.html - Here
we have a lighttpd bug to ruin the day. If we send both a Range: header and
If-Modified-Since: header across the wire in a GET request, lighttpd doesn't
do what we want in several cases. If the file hadn't been modified, it
returns a '304 Not Modified' instead of a '206 Partial Content'. We need to
do a stat (e.g. HEAD in HTTP terms) operation here, and the proceed
accordingly based off the values we get back from it.
3. The mtime stuff was rather ugly, and relied on the called function to
write back to a passed in reference, which isn't the greatest. Instead, use
the power of the filesystem to contain this info. Every file downloaded
internally is now carefully timestamped with the remote file time. This
should allow the resume logic to work. In order to guarantee this, we need
to implement a signal handler that catches interrupts, notifies the running
code, and causes it to set the mtimes on the file. It then rethrows the
signal so the pacman signal handler (or any frontend) works as expected.
4. We did a lot of funky stuff in trying to track the DB last modified time.
It is a lot easier to just keep the downloaded DB file around and track the
time on that rather than in a funky dot file. It also kills a lot of code.
5. For GPG verification of the databases down the road, we are going to need
the DB file around for at least a short bit of time anyway, so this gets us
closer to that.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Xav: fixed printf with off_t]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
* It makes the code clearer to read/understand
* Cppcheck tool doesn't show this anymore: [./util.c:215]: (error) Resource leak: fd
[Dan: don't change the coding style]
Signed-off-by: Dan McGee <dan@archlinux.org>
Thanks to Laszlo Papp <djszapi@archlinux.us> for the following catch:
opendir(path)) == (DIR *)-1;
is maybe the result of misunderstanding the manpage. If an opendir() call
isn't successful it returns NULL rather than '(DIR *)-1'.
Noticed-by: Laszlo Papp <djszapi@archlinux.us>
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm_pkg_get_name() gives us little benefit in backend code besides a NULL
check on the package passed in; we could do that ourself if necessary. By
changing to direct references in the cases where we are sure we have a valid
package, we save a function call each time we need a package name. This
function can't be inlined because it is externally accessible.
This cuts the calls to get_name() from 1.3 million times in a
pacman -Qu operation to around 2400.
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes the following valgrind warning :
==26831== Syscall param rt_sigaction(act->sa_flags) points to uninitialised
byte(s)
==26831== at 0x4282547: __libc_sigaction (in /lib/libc-2.10.1.so)
==26831== by 0x403C693: download_internal (dload.c:152)
==26831== by 0x403D0E4: _alpm_download_single_file (dload.c:311)
==26831== by 0x4033B72: alpm_db_update (be_files.c:319)
==26831== by 0x805205E: pacman_sync (sync.c:257)
==26831== by 0x804EE54: main (pacman.c:1120)
==26831== Address 0xbec6cc04 is on thread 1's stack
==26831==
==26831== Syscall param rt_sigaction(act->sa_restorer) points to
uninitialised byte(s)
==26831== at 0x4282547: __libc_sigaction (in /lib/libc-2.10.1.so)
==26831== by 0x403C693: download_internal (dload.c:152)
==26831== by 0x403D0E4: _alpm_download_single_file (dload.c:311)
==26831== by 0x4033B72: alpm_db_update (be_files.c:319)
==26831== by 0x805205E: pacman_sync (sync.c:257)
==26831== by 0x804EE54: main (pacman.c:1120)
==26831== Address 0xbec6cc08 is on thread 1's stack
==26831==
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Pacman's fgets function in the API used hardcoded numbers to identify the size.
This is not good practice, so replace them with sizeof handling.
Signed-off-by: Laszlo Papp <djszapi@archlinux.us>
Signed-off-by: Dan McGee <dan@archlinux.org>
This offers a cleaner way to deal with constant in enum and allow easy
maintainance
Signed-off-by: solsTiCe d'Hiver <solstice.dhiver@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
If the -d switch was invoked with -S (or -U), the removes list was simply
lost, because trans->remove was computed in an
"if(!(trans->flags & PM_TRANS_FLAG_NODEPS))" block.
I've added a new pactest file, sync045.py (derived from sync043.py) to test
this.
Additionally, I did some other minor cleanups in sync_prepare:
* preferred list is not needed anymore
* I removed a needless alpm_list_remove_dupes line (the target list should
not contain dupes at all)
* I moved alpm_list_free(remove); to cleanup part to eliminate a possible
memleak
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is more efficient than alpm_list_diff since it assumes the two lists
are sorted. And also we get the two sides of the diff.
Even sorting should more efficient than the current list_diff. Sorting the
two lists should be O(n*log(n)+m*log(m)) while the current list_diff is
O(n*m). So I also reimplemented list_diff using list_diff_sorted.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't need to count the number of packages left once per file when
removing; we only need to do it once per package. Also move a variable into
the correct scope.
Signed-off-by: Dan McGee <dan@archlinux.org>
After our recent screwup with size_t and ssize_t in the download code, I
found the `-Wsign-conversion` flag to GCC to see if we were doing anything
else boneheaded. I didn't find anything quite as bad, but we did have some
goofups- most of our public unsigned methods would return -1 on error, which
is a bit odd in an unsigned context.
Signed-off-by: Dan McGee <dan@archlinux.org>
A NULL list element triggered an infinite loop. Not cool :)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
fetchIO_read returns -1 in case of error, and the return type is
ssize_t, not size_t ! So we converted -1 to an unsigned, which led to
huge file write.
The rest is just changing the error return a bit.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Get them a bit more standardized across the board, as they were quite a
mess. Also note the two new translations we received for 3.3.1.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is for 3.3.0, not for 3.3.1. But since there are only like 10 messages
missing, it seems worth including now.
Signed-off-by: Christian Larsson <congacx@gmail.com>
Signed-off-by: Laszlo Papp <djszapi2@archlinux.us>
[Dan: fix some busted translation strings]
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 34e1413d75 attempted to implement lazy loading of package databases.
Although it took care of my main complaint (creating the database directory
if it didn't exist), it didn't allow sync repos to be registered before
alpm_option_set_dbpath() had been called.
With this patch, we no longer compute the individual repository DB paths
until necessary, allowing full lazy loading to work as intended, and
allowing us to drop the extra setlibpath() calls from the frontend. This
allows the changes introduced in a2cd48960 (but later reverted) to be added
back in again.
Signed-off-by: Dan McGee <dan@archlinux.org>
It was probably a bad idea to modify the target directly in case of
repo/pkg syntax.
Duplicating it also allows us to keep the original target string, which
is more informative when printing errors.
Also remove a duplicated error message from libalpm, and improve the
message already returned to the frontend.
$ pacman -S foo/bar
before
error: repository 'foo' not found
error: 'bar': no such repository
after
error: 'foo/bar': could not find repository for target
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add more untranslated strings, improve consistency, etc.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit 774c252 the --debug output shows 5-6 "syntax error..." lines
for each package. After this patch pacman recognizes makepkgopt as a valid
key, but doesn't do anything.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
-int alpm_trans_sysupgrade(int enable_downgrade);
-int alpm_trans_sync(char *target);
-int alpm_trans_add(char *target);
-int alpm_trans_remove(char *target);
+int alpm_sync_sysupgrade(int enable_downgrade);
+int alpm_sync_target(char *target);
+int alpm_sync_dbtarget(char *db, char *target);
+int alpm_add_target(char *target);
+int alpm_remove_target(char *target);
* functions renaming
* add new sync_dbtarget which allows to specify the db
* repo/ syntax handling is moved to frontend
( should implement FS#15141)
* group handling is moved to backend
( see http://www.archlinux.org/pipermail/pacman-dev/2009-June/008847.html )
This basically started with this change :
/* Transaction */
struct __pmtrans_t {
- pmtranstype_t type;
pmtransflag_t flags;
pmtransstate_t state;
- alpm_list_t *packages; /* list of (pmpkg_t *) */
+ alpm_list_t *add; /* list of (pmpkg_t *) */
+ alpm_list_t *remove; /* list of (pmpkg_t *) */
And then I have to modify all the code accordingly.
This patch utilizes the power of sync.c to fix FS#3492 and FS#5798.
Now an upgrade transaction is just a sync transaction internally (in alpm),
so all sync features are available with -U as well:
* conflict resolving
* sync dependencies from sync repos
* remove unresolvable targets
See http://www.archlinux.org/pipermail/pacman-dev/2009-June/008725.html
for the concept.
We use "mixed" target list, where PKG_FROM_FILE origin indicates local
package file, PKG_FROM_CACHE indicates sync package. The front-end can add
only one type of packages (depending on transaction type) atm, but if alpm
resolves dependencies for -U, we may get a real mixed trans->packages list.
_alpm_pkg_free_trans() was modified so that it can handle both target types
_alpm_add_prepare() was removed, we use _alpm_sync_prepare() instead
_alpm_add_commit() was renamed to _alpm_upgrade_targets()
sync.c (and deps.c) was modified slightly to handle mixed target lists,
the modifications are straightforward. There is one notable change here: We
don't create new upgrade trans in sync.c, we replace the pkgcache entries
with the loaded package files in the target list (this is a bit hackish) and
call _alpm_upgrade_targets(). This implies a TODO (pkg->origin_data.db is
not accessible anymore), but it doesn't hurt anything with pacman front-end,
so it will be fixed later (otherwise this patch would be huge).
I updated the documentation of -U and I added a new pactest, upgrade090.py,
to test the syncdeps feature of -U.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Sometimes "foo conflicts with bar" information is not enough, see this
thread: http://bbs.archlinux.org/viewtopic.php?id=77647. That's why I added
a new reason field to our pmconflict_t struct that stores the packager-
defined conflict that induced the fact that package1 conflicts with
package2.
I modified the front-end (in callback.c, sync.c, upgrade.c) to print this
new information as well.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
This function is unused since commit
358cc5804a.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: also kill from util.h]
Signed-off-by: Dan McGee <dan@archlinux.org>
- fix one memleak if get_filename failed
- cleanup according to Joerg's feedback:
"url_for_string: If fetchParseURL returned successful, you should always
have a scheme set. The logic for anonftp should only be needed for very
broken server -- do you know of any such?
download_internal:
Specifying 'p' is now a nop -- it is tried by default first with
fall-back to active FTP."
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: remove from pacman.conf and pacman.conf.5]
Signed-off-by: Dan McGee <dan@archlinux.org>
libfetch supports checking mtime so we do not need to do it manually.
when the databases are already up-to-date, initiating a connection with
fetchXGet and closing it right after with fetchIO_close took a very long
time (up to 10min!) on some network.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
(cherry picked from commit d7675e393f)
We had 10000 as our timeout value, assuming it was expressed in ms. This is
false after looking at the current code, so reset it back to 10 seconds.
Addresses FS#15369.
Signed-off-by: Dan McGee <dan@archlinux.org>
I assume the loop was never iterated more than once, because the write
location was not updated at each loop iteration (buffer instead of buffer +
nwritten), yet we never had reports of corrupted download.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
libfetch supports checking mtime so we do not need to do it manually.
when the databases are already up-to-date, initiating a connection with
fetchXGet and closing it right after with fetchIO_close took a very long
time (up to 10min!) on some network.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
If /sbin is not in the PATH and sudo is used, ldconfig cannot be found. So
use /sbin/ldconfig instead. The code checked for the existence of
/sbin/ldconfig anyway..
Signed-off-by: Marc - A. Dahlhaus <mad@wol.de>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit 30c4d53ce5, get_destfile and
get_tempfile are only used for internal download, so move these two
functions inside the ifdef
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
'make distcheck' had issues with this one and reformatted it. In addition,
it found a fuzzy message which is now fixed due to an inadvertent msgid
edit.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows a frontend to define its own download algorithm so that the
libfetch dependency can be omitted without using an external process.
The callback will be used when if it is defined, otherwise the old
behavior applies.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
[Dan: minor cleanups]
Signed-off-by: Dan McGee <dan@archlinux.org>
If the user switches from unstable repo to a stable one, it is quite hard to
sync its system with the new repo (the user will see many "Local is newer
than stable" messages, nothing more). That's why I introduced -Suu, which
treats a sync package like an upgrade, iff the package version doesn't match
with the local one's.
I added a new pactest (sync104.py) to test this, and I updated the
documentation of -Su.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: slight doc reword]
Signed-off-by: Dan McGee <dan@archlinux.org>
This happens for example if you install a new package, and one of its
backup config file is already on the file system.
If the local file was different, it was saved to .pacorig which is fine.
However if the local file and pkg file were the same, the pkg file
(temporarily extracted as .paccheck) was left on the system.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#15546
Also fix the interface of unlink_file which was really stupid..
(alpm_list_t used with only one element)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
A package can now replace symdir->dir by dir without fileconflicts.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
When one package wants to replace a directory by a file, we check that all
files in that directory were owned by that package.
Additionally pacman can be more verbose when the extraction of the symlink
(or file) fails. The patch to add.c looks more complex than it is, I just
moved and reindented code to handle cases 10 and 11 together.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#15294.
The code to run a command inside a chroot was refactored from the
_alpm_runscriptlet function to _alpm_run_chroot.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
See FS#14642- this allows -Qs output to be fed back into pacman without
problems or having to strip off the 'local/' prefix manually.
Signed-off-by: Dan McGee <dan@archlinux.org>
See FS#13099. This makes sense especially for the pacman frontend, as we
show groups in the search output.
Signed-off-by: Dan McGee <dan@archlinux.org>
$ sudo pacman -S mc
Old output:
***********
:: mc conflicts with mc-mp. Remove mc-mp? [Y/n] y
...
(1/1) checking for file conflicts [################] 100%
(1/1) installing mc [################] 100%
New output:
***********
:: mc conflicts with mc-mp. Remove mc-mp? [Y/n] y
...
(1/1) checking for file conflicts [################] 100%
(1/1) removing mc-mp [################] 100%
(1/1) installing mc [################] 100%
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#14899. When running an -Sp operation without servers
configured for a repository, we would segfault, so add an assert to the
backend method returning the first server preventing a null pointer
dereference.
In addition, add a new error code to libalpm that indicates we have no
servers configured for a repository. This makes -Sy and -S <package>
operations fail gracefully and helpfully when a repo is set up with no
servers, as the default mirrorlist in Arch is provided this way.
Signed-off-by: Dan McGee <dan@archlinux.org>
The main purpose of this function to make our code more readable.
It frees transaction specific fields of pmpkg_t. (It is used when a package
is removed from the target list.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
There is apparently no need to handle the re-compression manually when
applying a xdelta patch in case of bzip2 or xz.
Only gzip needs to be handled specifically for disabling timestamp with the
-n option.
After this patch, if xdelta is enhanced with xz support (1-line patch), it
will be transparent from pacman side.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This flag indicates that the front-end will not call alpm_trans_commit(),
so the database needn't be locked. This is the first step toward fixing
FS#8905.
If this flag is set, alpm_trans_commit() does nothing and returns with
an error (that has new code: PM_ERR_TRANS_NOT_LOCKED).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
"Foo replaces bar" simply means that "foo is a new version of bar".
So this patch refactors the code to use this "rule".
_alpm_sync_sysupgrade now does the following for each local package [bar]
(pseudo-code):
for db in syncdbs {
if(db contains bar) {check if db/bar is an upgrade; break;}
replacers = find(bar replacers in db);
if(replacers!=NULL) {ask_user; break;}
}
Note:
1. Replacers are grouped per repo. If more than one package replace bar in
a repo, all of them are considered ("package set of bar replacers").
2. If repo1/foo1 and repo2/foo2 both replaces bar, only repo1/foo1 is
considered (if repo1 stands before repo2 in pacman.conf). FS#11737 is fixed.
3. It can happen that pacman doesn't consider any replacer, if it found a
literal "earlier", so sync132.py modified accordingly (btw, that situation
should not appear irl).
The new sysupgrade code doesn't use sync_newversion(), so I removed the
"local is newer than repo" message, which was annoying with -Qu and
SyncFirst.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes a bug introduced by my previous changes which changes the
behavior of IgnorePkg/IgnoreGroup to allow the user to remove unresolvable
packages from the transaction. The bug is that the target-list was no
longer being consulted first to resolve dependencies, which means that if
two packages in the sync database satisfied a dependency, and the user
explicitly requested one of those two packages in the sync, the other
package was still being pulled in.
A new test was added, sync993.py, to verify the desired behavior.
Signed-off-by: Bryan Ischo <bji-keyword-pacman.3644cb@www.ischo.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
pmsyncpkg_t data sructure was removed:
1. pmpkg_t.reason is used instead of pmsyncpkg_t.newreason. (The target
packages come from sync repos, so we can use this field without any
problems. Upgrade transaction also uses this field to store this info.)
2. pmsyncpkg_t.removes was moved to pmpkg_t.removes.
This step requires careful programming, because we don't duplicate packages
when we add them to trans->packages. So we modify sync pkgcache when we
add this transaction-only info to our package. Hence it is important to
free this list when we remove any package from the target list
(remove_unresolvable, remove_conflicts, trans_free), otherwise this could
confuse the new sync transactions (with non-pacman GUI).
Overall, our code became ~100 line shorter, and we can call our helper
functions directly on trans->packages in sync.c, we don't need to maintain
parallel package lists.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
From now on _alpm_db_find_fileconflicts() works with upgrade and remove
target lists (like checkdeps), which makes it transaction independent
(we still need a trans param because of the progressbar). This is a small
step towards the universal transaction. So we call this function directly
from sync.c before commiting the remove transaction. This is much safer,
but we can get false fileconflict error alarms in some tricky cases
("symlinks puzzle" etc).
The patch on find_fileconflict looks complex, but it is mainly an
"indent-patch", the new code-part can be found after the
/* check remove list ... */ comment, and I modified something around the
"file has changed hand" case (see comment modifications in the code).
Unfortunately sync.c became more ugly, because we have to create 2 parallel
internal transactions: to avoid duplicated work, upgrade transaction is
used to load package data (filelists). This problem will disappear, when
we finally get rid of internal transactions.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Resolvedeps reports error when it cannot resolve some dependencies, puts
them into the *data list, and set pm_errno. If user removes the
unresolvable packages from the target list, we have no error anymore,
so from now on we free *data list (we eliminate a memleak) and unset
pm_errno.
(Additionally I removed two needless lines from the code, unresolvable list
is always freed in cleanup.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit f57f8d3386 pacman *silently*
ignores packages from IgnorePkg/IgnoreGroup during dependency resolving,
if prompt == 0. This behavior is changed to "give warning + ignore".
(Otherwise the user is not informed about the fact that the package
resolving was blocked by ignorepkg.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch fixes FS#12059.
Now sync_addtarget can return with PM_ERR_PKG_IGNORED, which indicates that
although the requested package was found it is in ignorepkg, so alpm could
not add it to the transaction. So the front-end can decide what to do.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds alpm_db_update() to the alpm_databases Doxygen group. The function
is described in more detail and a code example is given.
Signed-off-by: Dan McGee <dan@archlinux.org>
1) The changes to sync.c look big but there are mostly caused by
the indentation. Fix a bug where download_size == 0 because the packages and
deltas are already in the cache, but we still need to build the deltas list
and apply the deltas to create the final package.
2) Fix the gzip / md5sum issue by switching to xdelta3, disabling external
recompression and using gzip -n in pacman, and disable bsdtar compression
and using gzip -n in makepkg.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
This reverts commit 9558639d80.
This change was wrong, popen does require /bin/sh in a subchroot.
1) pacman -S lilo -r root
Notice no error
2) rm root/bin/sh ; pacman -S lilo -r root
Notice an error :
error: scriptlet failed to execute correctly
Actually, we already get an explicit error here, when popen is run, so there
is no need to check for bin/sh explicitely.
Besides this check was problematic in some cases. For example, bash itself
has a scriptlet, but only post_install and post_upgrade, no pre_install and
pre_upgrade. However, since bash has a scriptlet, runscriptlet will also be
called before bash is installed. It won't do anything since the scriptlet
has no pre_install function. But if we keep the check, we will still get
"error : no /bin/sh".
Conflicts:
lib/libalpm/trans.c
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a bug I noticed 2 years ago :
http://www.nabble.com/Re%3A-logging-output-crazy-to11437357.html#a11479679
I thought I fixed it with 57d77eab32
But the bug was still here. Reading man fork, this part caught my attention:
* The child inherits copies of the parent's set of open file
descriptors. Each file descriptor in the child refers to the same open
file description (see open(2)) as the corresponding file descriptor in the
parent. This means that the two descriptors share open file status
flags, current file offset, and signal-driven I/O attributes (see the
description of F_SETOWN and F_SETSIG in fcntl(2)).
Since the open file descriptors are inherited, it is probably a good idea to
flush them before forking.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The from_md5 and to_md5 fields were a nice extra safety, which would avoid
trying to apply deltas on corrupted package files. However, they are not
strictly necessary, since xdelta should be able to detect that on its own.
The main problem is that it is impossible to compute these informations from
the delta only. So repo-add would not be able to compute the delta entry
based on just the delta file.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Don't prompt the user for unignore of IgnorePkg/IgnoreGroup packages,
except for packages explicitly listed for sync by the user. This
eliminates many unnecessary prompts when IgnorePkg/IgnoreGroup is
used.
Signed-off-by: Bryan Ischo <bryan@ischo.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Enabled a new prompt to ask the user if they'd like to remove
unresolvable packages from the transaction rather than failing it.
Many pactest tests that used to fail now return success codes, because
pacman now issues a prompt allowing the user to cancel rather than
failing many transactions, and the pactest scripts always choose to
cancel with no error rather than failing. The only net effect is that
the return status of pacman is now 0 in cases where it used to be
nonzero.
Signed-off-by: Bryan Ischo <bryan@ischo.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This change reorganizes the internal code so that packages are
resolved one at a time instead of all at once from a list. This will
allow a future checkin to prompt the user to see if they'd rather
remove unresolvable packages from the transaction and continue, or
fail the transaction. This change does not affect the actual behavior
of libalpm and all tests pass without changes.
Signed-off-by: Bryan Ischo <bryan@ischo.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't need to create the directories when local or sync dbs are
registered. For example, if a sync db does not exist, we cannot even do
"pacman -Q" as an user.
Instead, we can create the local db if needed during the db_prepare
operation, and sync dbs on db_update.
Also remove some more useless abstractions in db_update and switch to a much
more efficient way to remove a sync db : rm -rf.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
These db_open and db_close looked quite useless. And they caused the db
directory to be opened on a simple registering of a database. This is
totally unneeded, this opening can be delayed to when we actually need it.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Instead of appending the prefix to each entry name, we can chdir to the
prefix before extracting, and restoring when it is done.
This seems to work better with the strange and special case of FS#12148
where an archive contained the "./" entry.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
This patch fixes FS#12148 ('unstable' regular file).
I also changed the other archive_entry_set_mode usage in add.c to
archive_entry_set_perm.
Since I cannot find any relevant info in libarchive manual, I quote
Tim Kientzle (the author of libarchive) here, and I say thank you for
his help.
*** Tim Kientzle wrote *************************************
This is the problem in libalpm/util.c:
323 if(S_ISREG(st->st_mode)) {
324 archive_entry_set_mode(entry, 0644);
325 } else if(S_ISDIR(st->st_mode)) {
326 archive_entry_set_mode(entry, 0755);
327 }
Your example unstable.db.tar.gz is not empty. It has
one entry in it, called "./". That entry is marked
as a directory. But, when you call archive_entry_set_mode(),
you are changing the file type! archive_read_extract()
then creates the file /var/unstable as you requested.
(archive_read_extract() will replace an empty directory
with a file.)
You should either set the mode value correctly:
323 if(S_ISREG(st->st_mode)) {
324 archive_entry_set_mode(entry, IFREG | 0644);
325 } else if(S_ISDIR(st->st_mode)) {
326 archive_entry_set_mode(entry, IFDIR | 0755);
327 }
Or use archive_entry_set_perm(), which does not change
the file type:
323 if(S_ISREG(st->st_mode)) {
324 archive_entry_set_perm(entry, 0644);
325 } else if(S_ISDIR(st->st_mode)) {
326 archive_entry_set_perm(entry, 0755);
327 }
************************************************************
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Clearly the old code was more elegant (NULL cache indicated "not loaded"),
but it had some drawbacks, so from now on we indicate the state of caches
explicitly.
Old drawbacks:
When we had an empty database (unstable), libalpm called db_populate after
every pkgcache access, because NULL pkgcache indicated "not loaded" state.
This is not a common case, but the same situation can happen with grpcache,
which is more problematic: If the user had a custom repo with no groups,
grpcache was always NULL. (grpcache is also loaded per database.) Thus
every get_grpcache call induced a load_grpcache operation, so the benefits
of grpcache was completely lost.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch introduces the following function name convention:
_compute_ in function name: the return value must be freed.
_get_ in function name: the return value must not be freed.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The HoldPkg feature is even more important when the packages to be held are
pulled automatically by pacman, in a -Rc and -Rs operation. Before, it only
applied when the packages were explicitly requested by the user to be
removed. This patch extends holdpkg to -Rc and -Rs by doing the HoldPkg
check just before trans_commit.
Additionally, the whole HoldPkg stuff was moved to the front-end.
I changed the default behavior to "don't remove", so I modified remove030.py
pactest as well.
See also: FS#9173.
Original-work-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Aaron said to consider libdownload a dead project so libdownload support was
removed to more easily fix libfetch one (otherwise many ifdef needed).
There was no direct replacement for ferror to detect an error while
downloading. So instead, I added a check at the end to see if the file was
fully downloaded, which is just a small chunk of code taken from here:
http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/net/libfetch/files/fetch.c?only_with_tag=MAIN
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the first step in being able to automatically remove phantom
lock files.
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: fix compilation warnings]
Signed-off-by: Dan McGee <dan@archlinux.org>
Changelogs and install files were getting extracted into the local
db folder before it was manually created. This created issues for
uses with 0077 umasks and was highlighted with the new sudo handling
of umasks (FS#12263).
This moves the local db creation to its own function which is called
before the start of package archive extraction. Also, added a check
that the folder is actually created.
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: rename to _alpm_db_prepare()]
Signed-off-by: Dan McGee <dan@archlinux.org>
Pacman currently logs .pacnew warnings to pacman.log but a similar history
of .pacsave warnings isn't kept. The user should be able to search
pacman.log to discover when and where all .pac* files were created by
pacman.
Addresses FS#12531.
Signed-off-by: Dan McGee <dan@archlinux.org>
May help debug issues we come across with proxy behavior (e.g. those pesky
segfaults) as well as be informative to the user when things aren't working
quite right. Addresses FS#12396.
Signed-off-by: Dan McGee <dan@archlinux.org>
If the delta line doesn't match our regex, we won't go and process it,
possibly walking off the end of the string.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't want a failed write to kill our whole program when we are
downloading things, so set the SIGPIPE handler to ignore when downloading
and restore any previous signal handler when we complete the download.
Signed-off-by: Dan McGee <dan@archlinux.org>
Use libfetch naming in the code in place of libdownload names. This is in
preparation for dropping support for libdownload at some point as libfetch
can run on Linux.
Signed-off-by: Dan McGee <dan@archlinux.org>
From now on -Qu is an "outdated package" filter on local database.
(This is a behaviour change.)
This patch fixes some memleaks and makes the code cleaner, for details see
my comment on FS#7884.
FS#11868 is implemented.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
We never had a call to pclose() in here before, leaving our file descriptor
in some sort of limbo state. In addition, clean up some of the other logic
such as directly calling exit(1) on a popen() failure rather than going to
our cleanup block, and handling and respecting the exit status of the
subprocess correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
It is possible to throw EINTR from a system call such as open(), close(), or
waitpid() if custom signal handlers are set up and they are not initialized
with the SA_RESTART flag. This was noticed by Andreas Radke when ^C (SIGINT)
was given during the call to waitpid(), causing it to throw the EINTR error
and we could not accommodate it.
Simply wrap these calls in a simple loop that allows us to retry the call if
interrupted.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is more consistent with the private functions :
_alpm_db_get_{pkg,grp}cache
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
These two functions now take directly a package list rather than a database.
checkdbconflicts was renamed to checkconflicts.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
* Update all .po files because of the last "-q,--quiet" fix.
Also for some strange reason, en_GB was missing a few c-format tags.
* Finally, delete all unused translations.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch kills one of our hackish pseudo transactions: PRINTURIS.
(The other one is -Sw)
From now on, front-end must not call trans_commit in case of -Sp,
it should print the uris of target packages "by hand" instead.
PRINTURIS flag was removed, NOCONFLICTS flag can be passed to skip
conflict checks.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This function returns with the origin database of a package.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is more rational and coherent with PM_TRANS_EVT_UPGRADE_DONE.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Change the return values to be more informative.
It was previously boolean, only indicating if a sync package was newer than
a local package.
Now it is a simple wrapper to vercmp, handling the force flag.
* Remove the verbose output from _alpm_pkg_compare_versions.
The "force" message is not so useful.
The "package : local (v1) is newer than repo (v2)" message can be moved to
-Su operation.
For the -S operation, it is better to have something like :
"downgrading package from v1 to v2"
* Don't display the "up to date -- skipping" and "up to date -- reinstalling"
messages, when the local version is newer than the sync one.
* Fix the behavior of --needed option to not skip a target when the local
version is newer, and clarify its description.
* Add a new alpm_pkg_has_force function
This allows us to access the pkg->force field like any other package fields.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Probably a tweakable "lockdb-retry" option was planned which is not
implemented. (Now it should be implemented in front-end.)
So now this variable was unused and caused a small memleak.
(FREE(dir) was not reached in case of error.)
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Due to differences in handling va_list between i686 and x86_64, this bug
can only be seen on x86_64. va_list usage is not allowed but we had been
getting away with it. See
http://lists.opensuse.org/opensuse-programming/2008-02/msg00005.html
for details and explanation.
This fixes FS#11096.
Signed-off-by: Dan McGee <dan@archlinux.org>
When this function got a rewrite in commit f43805d875, argument and variable
names got a bit mixed up when separating the casts from the strcmp
operation. Fix the mixup which also fixes a possible segfault when this
function is called.
Signed-off-by: Dan McGee <dan@archlinux.org>
If a Server specified in pacman.conf had a trailing slash, libalpm ended up
building URLs with double slashes, and this broke libdownload with errors
like the following one :
error: failed retrieving file 'redland-1.0.8-1-i686.pkg.tar.gz'
from 192.168.0.90 : Command okay
So the public function alpm_db_set_server will make sure to remove the
trailing slash of servers. For the private function
_alpm_download_single_file, I only added a comment.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Before commit fc48dc31, file:/// urls forced the use of the internal
downloader (libdownload), because the default XferCommand, wget, does not
handle them. We tried to move away from forcing usage of libdownload, so
this commit implemented the handling of file:/// urls manually. However,
this implementation is way too basic. It does not handle the progress bar,
thus nothing at all appears in pacman's output when a file: repo is
synchronized, or when a file is downloaded from a sync repo. Also, it is not
able to detect when the repo is already up-to-date. When libdownload was
used, both were handled.
It seems better to just drop this implementation for now. All users who use
libdownload will get the much better file:// handling back. For the users of
XferCommand, it will be more problematic, but they have several options:
1) Switch to a downloader handling file:// (wget doesn't, but curl does for
example).
2) Drop the file:// repo, and set up light http or ftp servers instead.
Consider that going that way would make this repo available for the whole
local network, which can be useful.
3) Switch back to libdownload, which works perfectly for many users.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Two recent commits slightly broke the translations, so this fixes all of
them.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#2334.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: add some comments to the code]
Signed-off-by: Dan McGee <dan@archlinux.org>
The pkg_dup function shouldn't call any alpm_pkg_get_ accessors because
this can fill the old package with all INFRQ_DESC fields for example, and
this won't necessarily be reproduced in the new package (for all the fields
that were copied before).
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This vercmp issue has been a sticking point but this should resolve many of
the issues that have come up. Only a few minor code changes were necessary
to get the behavior we desired, and this version appears to beat any other
vercmp rendition on a few more cases added in this commit.
This commit passes all 58 vercmp tests currently out there. Other 'fixes'
still fail on a few tests, namely these ones:
test: ver1: 1.5.a ver2: 1.5 ret: -1 expected: 1
==> FAILURE
test: ver1: 1.5 ver2: 1.5.a ret: 1 expected: -1
==> FAILURE
test: ver1: 1.5-1 ver2: 1.5.b ret: 1 expected: -1
==> FAILURE
test: ver1: 1.5.b ver2: 1.5-1 ret: -1 expected: 1
==> FAILURE
4 of 58 tests failed
Signed-off-by: Dan McGee <dan@archlinux.org>
