The package() function has been around since pacman-3.3 and has
significant advantages including limited fakeroot usage and correct
repackaging. The ability to use PKGBUILDs without a package function
will be removed in a future release.
Signed-off-by: Allan McRae <allan@archlinux.org>
There are valid reasons for a source files PGP signature to be changed
(expired key, expired signature, additional person signing...). Thus
providing a checksum for signature files can potentially cause a
PKGBUILD to require unnecessary updating.
Avoid this issue by using "SKIP" for the signature checksum.
Fixes FS#31590.
Signed-off-by: Allan McRae <allan@archlinux.org>
Using the last match in the BUILDENV and OPTIONS arrays allows the
user to easily override these values without specifying the entire
array. For example add "BUILDENV+=(sign)" in ~/.makepkg.conf.
Fixes FS#26701.
Signed-off-by: Allan McRae <allan@archlinux.org>
The list of which download protocol should look in makepkg.conf for the
download agent was hard coded into makepkg. Instead, fallback to checking
the the download agents array for any non-local or (implemented) vcs
source.
Signed-off-by: Allan McRae <allan@archlinux.org>
* For any vcs other that git, the fall through resulted in being handled by the
code for std url, hence fragments were being left on.
* Handle vcs urls than end in a slash correctly, eg http://example.com/project/
Signed-off-by: Gary van der Merwe <garyvdm@gmail.com>
Before this patch, makepkg does not check if $dir is a local clone of
the right repo.
For example, git fetch would be run even if $dir is not a local
bare clone of a git repo in present in source(), but a subdir of
a checked-out one. That means makepkg can potentially fetch from
a completely unrelated remote and update completely unrelated
dirs/files.
This patch adds a check to make sure we are fetching from the right
remote.
Signed-off-by: Mohammad Alsaleh <msal@i2pmail.org>
Before this patch, makepkg would only check if $dir exists as an
indication that a local clone exists. And if $dir does exist, makepkg
will run git fetch inside it unconditionally.
After applying this patch, makepkg will check if the existent $dir is
empty. And if it is, it will be used to store a local clone.
Signed-off-by: Mohammad Alsaleh <msal@i2pmail.org>
Three warnings after someone deliberately typed --noextract is a
tad excessive... Also, an empty $srcdir is perfectly valid when
the source array is empty, although using --noextact then is
wasteful.
Signed-off-by: Allan McRae <allan@archlinux.org>
Rather than calling upon ls for this, use a proper shell function which
uses globbing to determine the existance of files in a directory.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Somewhere in the arg parse refactoring, the args array went away and we
simply stashed our remaining parameters as positionals. Fix this up so
that pkgdelta doesn't mysteriously hang in read_pkginfo().
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
If a pkgver() function is specified, delay checking the package is
built until the pkgver is updated..
Signed-off-by: Allan McRae <allan@archlinux.org>
Do not update VCS sources if --holdver is used. If the VCS checkout
is not present, it will still be downloaded.
Signed-off-by: Allan McRae <allan@archlinux.org>
VCS sources are not needed for --geninteg or --source operations.
This also prevents VCS downloads outputting to stdout, which
prevented piping -g output to the PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
Allow SVN repo sources in the form:
source=("<folder>::<repo>#<fragment>")
where <repo> must start with svn (e.g svn+http://) and a <fragment>
can specify a revision (e.g. revision=22).
Signed-off-by: Allan McRae <allan@archlinux.org>
Now that VCS repos are provided in the source array, it becomes too
complicated to have automatic updating pkgver as was the case with
the old VCS PKGBUILDs (there can be multiple repos of different types
in the source array, the VCS repo may not be the package primary
source, etc).
Instead provide an optional way for a PKGBUILD to update the pkgver
value through the specifing of a pkgver() function that returns the
new version string. This is run after all source files are downloaded
so can access the VCS repo if needed.
Signed-off-by: Allan McRae <allan@archlinux.org>
With VCS sources, get_filepath should return the directory of the
checkout. This allows backing up of the VCS checkout when using
--allsource. Fixes FS#21098.
Signed-off-by: Allan McRae <allan@archlinux.org>
Modify get_filename to return the name of the folder with VCS sources.
This fixes output issues in checksum checking.
Signed-off-by: Allan McRae <allan@archlinux.org>
Allow specifing GIT sources using the following syntax
source=('<folder>::<repo>#<fragment>')
This will download the git repo <repo> into <folder> (into $SRCDIR
if set, otherwise $startdir). <repo> must start with "git", but
non-git protocols are handled using (e.g.) "git+http://...".
The <fragment> can be used to specify a branch, tag, or commit to
build from. e.g. branch=maint.
Checksum entries for git sources should be "SKIP".
Signed-off-by: Allan McRae <allan@archlinux.org>
If "SKIP" is provided for an integrity check, abort checking as soon
as possible.
Also swap fork to tr for bash4 conversion.
Signed-off-by: Allan McRae <allan@archlinux.org>
In order to treat all VCS sources as URLs, we need to be able to
deal with more protocols. Rewrite download_sources to use a case
statement so additional protocols are easily added.
Also fix the use of scp to not pass the protocol in the URL
(noticed by William J. Bowman <wjb@williamjbowman.com>)
Signed-off-by: Allan McRae <allan@archlinux.org>
There is no actual code change here, but these related functions
were all over the place which makes this code difficult to adjust.
Signed-off-by: Allan McRae <allan@archlinux.org>
The current VCS packaging support is really, really, really bad.
It is best to strip it out completely before rewriting it.
Signed-off-by: Allan McRae <allan@archlinux.org>
This extra newline leaves a gap that looks strange in of itself,
but is highlighted when piping -g output to a PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
add the asdeps flag for makepkg so that it does pacman -U --asdeps
[Allan: clean-up whitespace]
Signed-off-by: Daniel Wallace <daniel.wallace12@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This function is the reverse of human_to_size, and converts integer byte
sizes to human readable SI prefixed values.
A logical extension of this might be to mimic the formatter that pacman
uses and allow a second argument to be passed in which can coerce the
size, rather than reducing until the unit count is below 1024.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Update the documentation accordingly to mention that users can expect
huamn readable sizes to be acceptable.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This is a bash wrapper around an awk function that parses human readable
sizes and returns their representative values in bytes, as a string. A
small test harness is added to validate the functionality.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Similar to the case for makedepends, it is useful to be able to
access this information without parsing a PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
I have noticed that quite a number of packages fail with "makepkg -R"
when their (make)dependencies are not installed. Adjust makepkg to
check for dependencies when used with -R. This can still be avoided
by using --nodeps/-d.
Signed-off-by: Allan McRae <allan@archlinux.org>
This is already being used (despite not working...) in packages
in the Arch Linux repos.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allow makepkg to work correctly when used with find from busybox.
Fix handling of cross directory symlinks.
Signed-off-by: Jeremy Huntwork <jhuntwork@lightcubesolutions.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This was missed in the switch to parseopts, and was caught by distcheck.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fix the creation of the repo-remove symlink in the scripts/ dir
on building.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Rewrite the handling of libdepends. The primary advantage are:
- Moves functionality from write_pkginfo() to find_libdepends().
- The order of the depends array in the PKGBUILD is kept in the package.
- An unneeded libdepends is only a warning and not an error. This allows
putting a libdepend on a library that is dlopened.
- It is now modular so can be extended to library types other than
ELF *.so.
- Finding the list of libraries a package depends only occurs when a
libdepend is specified in the depends array.
Signed-off-by: Allan McRae <allan@archlinux.org>
This is useful for tools that automatically rebuild packages and
thus require to generate a build order. These entries are skipped
by pacman.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently there is no way to access the makedepends for a package
apart from parsing its PKGBUILD. Put these into the .PKGINFO file
with the idea of making them available in the repo dbs so that
automated build tools can readily determine build order.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add CPPFLAGS support in addition to the current CFLAGS and CXXFLAGS.
This keeps compiler flags split up in the same logical way done
everywhere else.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
With bash4 as a requirement, we can use mapfile when reading command
output into an array. mapfile has the advantage of using block buffered
I/O rather than line buffered I/O, making it slightly faster for most
jobs.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Test for file content (-s) rather than just existance (-f). This fixes a
bug that manifests itself in the case of an empty -revoked file. A zero
element 'keys' array would be passed to gpg, forcing it to list and,
subsequently, revoke all known keys.
Bug introduced in d1240f67ea.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
get_pkg_arch checked for the arch variable being overridden in the
package_$1() function when used with a package as a parameter.
However, when there was no override, it did not fall back to the
global value.
Signed-off-by: Allan McRae <allan@archlinux.org>
Instead of creating a subshell for each of these checks (of which there
are many), pass in an expected value and make the check_* function do
the comparison for us, returning 0 (match), 1, (mismatch), or 127 (not
found).
For a measureable benefit, I tested this on a fairly simple package,
perl-term-readkey, and counted the number of clone(2) syscalls to try
and isolate those generated by makepkg itself, rather than the user
defined functions. Results as shown below:
336 before
180 after
So, roughly a 50% reduction, which makes sense given that a single
check_option() call could be up to 3 subprocesses in total.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This script is of questionable value, as it ranks mirrors by an
uninteresting attribute: ping. While the script itself is interesting,
people should be encouraged to rank mirrors by more useful measures,
such as actual speed, locality, or up to date-ness.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This fixes a lot of checks done by makepkg (e.g. to see if a package
is already built and choosing which package to install). Previously,
if a package had both "i686" and "any" versions, the "i686" one
always took precidence regardless of the value of "arch" in the
PKGBUILD for that package. Fixes FS#27204.
Signed-off-by: Allan McRae <allan@archlinux.org>
Use the no-exec mode of $(BASH_SHELL) to check for syntax errors in
shell scripts. Since we use the extglob feature in various places, this
requires that we pass -O extglob to the shell as well, to ensure that
the parser is armed to handle this syntax.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Perform a search for keys that clearly aren't key IDs. This allows
receiving keys by name or email address, but only if the key resolves
unambiguously.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Loop through arguments passed to verify_sig and treat each as a
signature to be verified against a source file. Output each file as its
checked to avoid ambiguity.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This requires an ugly amount of reworking of how pacman-key handles
options. The change simply to avoid passing keys, files, and directories
as arguments to options, but to leave them as arguments to the overall
program. This is reasonable since pacman-key limits the user to
essentially one operation per invocation (like pacman).
Since we now pass around the positional parameters to the various
operations, we can add some better sanity checking. Each operation is
responsible for testing input and making sure it can operate properly,
otherwise it throws an error and exits.
The doc is updated to reflect this, and uses similar verbiage as pacman,
describing the non-option arguments now passed to pacman-key as targets.
Similar to the doc, --help is reorganized to separate operations and
options and remove argument tokens from operations.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This will replace our current options parser used in pacman-key,
makepkg, and ideally elsewhere. It follows heuristics closer to that of
GNU getopt long (and thus pacman itself), with the exception that it
does not allow for options with optional arguments. Due to the way this
parser will be used, this sort of functionality will not be needed.
Instead of relying on eval+set, options are normalized into an array,
OPTRET, which callers should expect to be populated after returning from
parseopts. This avoids problems with quotes and spaces in arguments,
assuming that the user quotes properly when passing into the
application.
A new test harness for parseopts is added in test/scripts.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This removes some unnecessary quotes and adds quotes in a few places to
hopefully work correctly if the tempdir has spaces.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
Big deltas or deltas for very small packages are not needed so we should
check that and not generate any.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
If the PKGBUILD isn't writeable for devel_update, throw a warning
instead of silently ignoring it. Some logical reordering is present in
this patch to reduce the number of nested if's.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
It's expected that this will lead to unwanted behavior, and needs
widespread testing. It's desirable to commit this for a few reasons:
- there's no reason we can't do our own error checking for code that we
write.
- it avoids the need for ||true hacks scattered about in the code.
- it makes us immune to upstream changes in exit codes (FS#28248)
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Extend our grep pattern to match TRUST_ULTIMATE, not just TRUST_FULLY,
as these keys are to be trusted as well.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Make these functions more whitespace space by treating newlines as the
element delimiter rather than every form of whitespace.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This was a small oversight from 1917c845 which causes makepkg to write
provides entries to the .PKGINFO file improperly, e.g.
provides = systemdlibsystemdudev=999
Add a newline in the printf format to ensure that these are spaced
appropriately.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
In preparation for the removal of the global error trap we need a
way to ensure changing directories succeeds. Add a "cd_safe"
wrapper that performs the necessary check.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Also make sure the strings passed to %s in printf are always quoted.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This was really only half a fix for FS#28445, as it still doesn't
correctly handle the case of filenames with spaces. In the short term,
there is no obvious fix for this. In the long term, I believe the
correct decision is to rewrite the options parser to be more in line
with GNU getopt_long.
This reverts commits:
ca41427141.
969dcddbdf.
This has been 0 since 9fa18d9a4b, but it
doesn't makes sense because we are raising an error.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
We cannot rely on gpg's exit code. Instead we have to check the status-fd to
figure out whether a signature is valid or not.
In addition to this pacman-key --verify can now be used in scripts as it will
return an exit code of 1 if the signature is invalid.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This matches the optimization made to repo-add in commit 8bbaf045b9
way back in 2009. We don't need to read the whole package file to ensure
multiple .PKGINFO entries don't exist, as well-formed packages should
have this file first in the archive.
Signed-off-by: Dan McGee <dan@archlinux.org>
Since we treat this as an array, we need to initialize it as one. This
avoids addition of an empty element to the option string when we set the
option array from the calling program, e.g.
+/usr/bin/makepkg[2033]: set -- -i --pkg vim -- ''
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
User reports indicate that the SKS keyservers are more reliable
than both the gnupg.net and mit.edu ones.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Using -e without arguments failed to export all keys. Using --export
worked as expected.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Pull updates from transifex, run update-po on all files, fix a few
errors, and push them back to Transifex.
Signed-off-by: Dan McGee <dan@archlinux.org>
delayed allocation hoses us here and causes erroenous install sizes to
be reported. Add a short sleep to allow the transaction to be committed
to the filesystem and the stat buffers to be updated.
This is apparently a "feature", as per to some of the denizens of #btrfs
on freenode.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Most places in makepkg deal with full file paths, but a few use the
file name only. Protect from potential issues when a file name
starts with a hyphen.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This means multiple packages can be build using the same BUILDDIR
without their source files all ending up extracted in the same
directory. Fixes FS#28417.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Similar to how we manage receipt of SIGINT in pacman's internal
downloader, catch the signal and invoke our own trap handler before
unsetting it and calling the default. This requires a slight
modification to the arguments passed to trap_exit so we can pass the
raised signal to trap_exit (note that we substitue USR1 for ERR since
the latter is unique to bash).
Fixes FS#28491.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Adds the ability to override the commands used to compressing
compiled and source packages. This is useful for those wanting
to use alternative implementations of the compression tools or
non-default compression options.
Allan: documented options in man page
Signed-off-by: Allan McRae <allan@archlinux.org>
The rest of our scripts have been using `openssl dgst` rather than tools
like `md5sum` for some time, so convert this one too. We also make the
following other adjustments:
* Use a `find -print0 | xargs -0` pipeline so paths with spaces and or
newlines don't totally kill us.
* Ensure the files we write out contain only paths relative to the
database root, where we know the filenames should all be sane.
* Remove use of `diff`, this was the only time we used it in scripts and
we can get a cheap substitute by comparing file checksums instead.
* Only touch the local/ part of the database. It makes little sense to
do anything to the sync/ directory anymore as they are compressed
single files that should be regularly written out in full and won't be
fragmented on any sane filesystem.
Signed-off-by: Dan McGee <dan@archlinux.org>
Verifing the keyring at this point is useless as a malicious package is already
installed and as such has several options to bypass this check anyway.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
* it updates to all translations
* minor fr, pt_BR, de, lt, sk and uk updates
* add new strings in pacman translation catalog
Signed-off-by: Dan McGee <dan@archlinux.org>
Passing the "-L" flag to stat means we get the size of the file
being pointed to for symlinks instead of the size of the symlink.
Keep "-L" usage in repo-add as we want the actual size of the
package/delta/signature there.
Signed-off-by: Allan McRae <allan@archlinux.org>
With multiple items in $libdepends this check only worked for the first
one, everything after this returned an error. This was probably an issue
with \s being treated wrong.
Fix-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Florian Pritz <bluewind@xinu.at>
libperl.so results in soname="libperl.so.so" which is wrong.
This returns the correct string: "libperl.so"
Fix-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Florian Pritz <bluewind@xinu.at>
This reworks the implmentation of libprovides for the following
benefits:
- Moves functionality from write_pkginfo() to find_libprovides()
- Only calculates the version for libraries specifically requested
and not all libraries. This has the disadvantage of running find
over the $pkgdir for as many libraries as needed, but is unlikely
to be an issue due to caching.
- The order of the provides array in the PKGBUILD is kept in the
package
- There are more warning messages when things fail and those that
were there are no longer errors (as I do not think failure of
libprovides should result in complete packaging failure)
- It is now modular so can be easy extended to other library types
other than ELF *.so.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Modify parse_options logic to fill an array instead of printing parsed
options. Avoid eval like the plague. Because it is the plague.
Fixes bugs such as FS#28445.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes a problem that occurs if you tell makepkg to remove installed
dependencies (just to be sure) but there are none. As the $ was missing
in front of deplist, the check never happened and 'pacman -Rn' was
called which obviously failed.
Dan: later reported as FS#28448.
Signed-off-by: Christoph Vigano <mail@cvigano.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This wonderful/awful little bash shell variable wrecks havoc on `cd`
calls in shell scripts. Unset CDPATH in makepkg where we use `cd` quite
heavily. In pacman-optimize, we can move the change directory logic into
the bsdtar call so we are left with no usages of `cd` in the script.
Signed-off-by: Dan McGee <dan@archlinux.org>
PKGBUILDs are advertised as being pure bash so it would be expected
that the default bash options are in effect when sourcing it.
This inadvertantly "fixes" FS#27780 where enabling extglob causes
the bash parser to error on non-valid bash function names like
package_libxml++(). Note that these function names are unsupported
in bash and could break again even with this "fix" in future bash
releases.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
From mercurial-2.1, "hg pull" returns 1 when there are no updates.
Catch the return code and either pull the update or return an
error as appropriate.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is after some manual massaging to fix issues with newlines in some
translations of the script catalogs.
Signed-off-by: Dan McGee <dan@archlinux.org>
Provide a helpful error message for when creating a source tarball
and SRCPKGDEST is not writable.
Fixes FS#28197.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead of iterating over the revocation keyfile and calling gpg once
for each key, map the file into an array and call gpg once, iterating
over this output to mark each key as revoked.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses two problems:
1) echo's behavior is inconsistent when dealing with flags, and can
potentially be problematic.
$ echo -n
$ echo -- -n
-- -n
2) Always using the end of options markers prevents translated strings
from throwing errors, as shown in FS#28069.
The remaining "inconsistencies" are because printf is being used in a
guaranteed safe manner, e.g.
printf '%s\n' "$(gettext "--this can never break")"
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This "fixes" two issues:
1) MAN_DIRS contains a glob by default so should not be quoted. It is
not quoted anywhere else so this should not cause breakage...
2) the find statement returns 1 when some of MAN_DIRS are missing. This
appears to only be exposed when running makepkg as root (which it appears
some wrappers do...).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
With pacman-4.0, using --noconfirm or --noprogressbar with -Q or -T
results in pacman reporting an "invalid option" error. Restrict the
passing of these options to pacman. Fixes FS#28012.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The grep statement used to check for a difference between the
installed package list before and after resolving dependencies
returns 1 if there is no difference. This sets of the error
trap when "-r" is used "unnecessarily".
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Return codes from gpg commands are currently lost. This adds the functionality
of taking non-zero exit statuses from gpg. This includes error reporting for all
gpg commands that are run individually, run in a loop, and run through a pipe.
Includes the check_keyids_exist function which verifies a key exists locally
prior to attempted local manipulation of the key.
If a gpg command has a non-zero status, pacman-key will now exit with a non-zero
status. It will print a gettext error message of gpg's failure.
Signed-off-by: canyonknight <canyonknight@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Adds functions for every gpg command. By pulling out the gpg commands from the
"program start" section, additional commands can be run before or after a
specific gpg command without adding additional clutter to the function call
section.
Adds an explicit exit status of 0 to prevent arithmetic expansions from
returning non-zero, thereby falsely causing pacman-key to have a non-zero exit
status.
This change creates the framework for additional error messages and better
exit statuses being added to every pacman-key gpg call.
Signed-off-by: canyonknight <canyonknight@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Use consistent blank lines across all commands, get rid of the
translated double newlines which only serve to confuse translators, and
fix -h/--help for that extra special third command this script offers.
Signed-off-by: Dan McGee <dan@archlinux.org>
makepkg would not abort on a missing download agent due to the
output variable being declared local on the same line as the
function call in the assignment. That would result in strange output
such as:
==> Retrieving Sources...
==> ERROR: There is no agent set up to handle foo URLs. Check /etc/makepkg.conf.
Aborting...
-> Downloading foobaz...
/home/arch/code/pacman/scripts/makepkg: line 401: foo://foobaz: No such file or directory
==> ERROR: Failure while downloading foobaz
Aborting...
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Declaring the variable as local on the same line as the assignment
results in result of the assignment being returned rather than the
result of the function on the righthand side of the assignment.
Declaring the variable as local on a separate line means the result
of the function on the r.h.s. is returned and our error function
will be invoked if necessary (although it is practically impossible
to ever trigger it...).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Simplify the source tarball generation by unifying the handling of
local and remote files. This also allows local files to be found
in $SRCDEST (FS#26580) and makepkg will abort on missing local source
files (only possible to trigger in combination with --skipinteg).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The current calculation of the total file size for a package using "du"
suffers from issues in portability and correctness. Especially on btrfs,
this can result in clearly wrong package information such as:
Download Size : 14684.29 KiB
Installed Size : 7628.00 KiB
Use an approach based on "stat" to calculate total file size.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Using the value of "SKIP" in the checksum array will cause that
integrity check to be skipped. This makes building packages that
rely on user configurable sources less painful.
Based-on-patch-by: Dan McGee <dan@archlinux.org>
Based-on-patch-by: David Campbell <davekong@archlinux.us>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allows renamed .asc/.sig files to be still discovered by makepkg. This
is needed for a package such as PuTTY, which provides abnormally named
sig files (.DSA and .RSA) which are valid input for gpg --verify.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This converts our script generation to use the built-in AM_V_GEN macro,
which honors the V= setting passed to make and allows one to see the
full command if they truly desire. The AM_V_at macro is also used in
place of an explicit @ so verbose-mode compiles show all commands being
run.
We can also use these two macros in doc generation to quiet it down to
the level we expect.
Other minor changes:
* a pointless test call is removed in test/pacman/tests/
* sed is used instead of dos2unix as we depend on it anyway
* consecutive chmod calls are reduced to a single call (e.g., '+x,a-x')
Signed-off-by: Dan McGee <dan@archlinux.org>
Be more semantically accurate and avoid accidental overwriting of some
configuration variables that are considered to be constant.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents user error in adding a file generated via `gpg --sign`
rather than `--detach-sign`, for example. The same 16KiB limit is used
we use in our pacman download code.
The section is moved above the checksum generation to avoid presenting
info messages to the user if the signature isn't valid.
Addresses a shortcoming pointed out in FS#27453.
Signed-off-by: Dan McGee <dan@archlinux.org>
Whereas comm will check inputs to see if they're sorted (and warn when
they aren't), grep doesn't even care about ordering. In this particular
instance -- neither do we. We're only interested that the two lists are
equivalent.
Fixes FS#26580.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add support for overriding configuration in /etc/makepkg.conf and
~/.makepkg.conf by setting the environment variable PACKAGER similar to
how SRCDEST and PKGDEST behave.
Signed-off-by: Allan McRae <allan@archlinux.org>
This addresses a short but sweet race condition currently existing in
repo-add and repo-remove. We do the smart thing and zip the database to
a location in a temporary directory and not over the original database
directly. However, we then proceed to move this file directly from the
temporary directory to our final location, which is more than likely a
cross-filesystem move (/tmp on tmpfs) and thus non-atomic.
Instead, zip the file to the same directory, prefixing the filename with
'.tmp.'. We then move the file into place. This move is guaranteed to be
atomic, so any reader of the database file will get either the old
version, the new version, or ENOENT.
We also perform a hardlink if possible instead of a move when shifting
the old database out of the way to '.old'; this ensures there is no
chance of a database file not existing during the whole process.
Only one small race condition should now be present- when the database
has been fully moved into place and the signature has not, you may see a
mismatch. There seems to be no good way to address this, and it existed
before this patch.
A final note- if someone had locked-down permissions on the directory
that the database files are in (e.g., could only write to foo.db.tar.gz,
foo.db, foo.db.tar.gz.old, foo.db.old, and the lock file), this would
break.
Signed-off-by: Dan McGee <dan@archlinux.org>
Given our semi-frequent use of pushd/popd, if we are in any directory
but the original and the database path given was relative, we won't
unlock the database file when cleaning up after an error.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Add last-minute changes to NEWS
* Don't treat '_' or '_n' special in scripts when finding translatable
strings; this breaks with one use of `read` and a dummy _ variable
Signed-off-by: Dan McGee <dan@archlinux.org>
This applies to pkgver, pkgrel, and epoch and ensures that any trailing
whitespace outside of the context of the variable declaration itself is
properly trimmed. The Bash parser will ignore this, and so should we.
We don't need to worry about leading space because it would force a
syntax error, or fail validation.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Bump the version, update the translation template files, and fill in
NEWS with relevant commits and changes since 4.0.0.
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevent bsdtar from exploding when install= or changelog= are
present without a value.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Detached sgnature files with extension .sign are accepted by gnupg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The default is supposidely 30 seconds from the gpg manpage, but that
sure wasn't what I was seeing- it was somewhere closer to two minutes of
silence. Add a more reasonable 10 second timeout value which should be
good enough for any keyserver that doesn't totally stink at it's job.
Signed-off-by: Dan McGee <dan@archlinux.org>
Replace "/tmp" with "${TMPDIR:-/tmp}" to allow for overriding the
hardcoded path.
Since we only use "/tmp" in conjunction with mktemp(1), we could also
have used "--tmpdir", which is GNU-ish, however (and the BSD counterpart
"-t" has been deprecated in GNU mktemp).
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This includes some fixes to the messages that are displayed when a
signal is caught in makepkg or repo-add:
* Instead of always showing "==> ERROR: TERM signal caught. Exiting...",
replace "TERM" by whatever signal is actually caught.
* Fix a typo in the SIGERR error message in repo-add ("occurred" instead
of "occured"). Francois already fixed this for makepkg in 1e51b81c.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
There is a small chance that a user sends SIGINT (or any other signal
that is trapped) when we're already in clean_up() which used to lead to
trap_exit() being executed and the remaining code in clean_up() being
skipped due to the bash signal/trap handler blocking EXIT (since its
handler is already being executed, even if it's interrupted).
In practice, this behaviour caused unexpected results (primarily because
pressing ^C at the wrong time left a lock file behind):
$ ./repo-add extra.db.tar.gz foobar
==> Extracting database to a temporary location...
^C
==> ERROR: Aborted by user! Exiting...
$ ./repo-add extra.db.tar.gz foobar
==> Extracting database to a temporary location...
==> ERROR: File 'foobar' not found.
==> No packages modified, nothing to do.
^C
==> ERROR: Aborted by user! Exiting...
$ ./repo-add extra.db.tar.gz foobar
==> ERROR: Failed to acquire lockfile: extra.db.tar.gz.lck.
==> ERROR: Held by process 18522
Fix this and reduce the chance of race conditions in signal handlers by:
* Unhooking all traps in both clean_up() and trap_exit().
* Call clean_up() explicitly in trap_exit() to make sure we remove the
lock file and the temporary directory even if we send SIGINT when
clean_up() is already being executed but didn't reach the unhook code
yet.
Also, add an optional parameter to clean_up() to allow for setting an
explicit exit code when we call clean_up() from trap_exit().
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
We have a few incomplete translations, but these should be addressable
before the 4.0.1 maint release that is surely not that far in the
future.
Signed-off-by: Dan McGee <dan@archlinux.org>
Inline comments after pkgver or pkgrel would cause the sanity
checks to fail so remove them before checking the value.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows it to serve double-duty. In order to allow users to base
verification decisions off of both a valid signature and a trusted
signature, we need to assign some level of owner trust to the keys we
designate as trusted on import.
Signed-off-by: Dan McGee <dan@archlinux.org>
* --import now only imports keys from pubkey.gpg and does not import
owner trust; if you want to have both simply run the operations in
sequence.
* --import-trustdb has been simplified; it will overwrite existing
values in the trust database as before, but there is no need to export
it first as those values are safe if left untouched.
* Fix the manpage referring to a non-existent option.
Signed-off-by: Dan McGee <dan@archlinux.org>
If PKGEXT is not one of the recognized tar*'s, create_package() would
create an empty package file and fail, since bsdtar on the left side of
the pipe returns 141 on SIGPIPE (broken pipe).
This patch changes the behavior for an invalid PKGEXT. A warning is
printed on stderr, and a tar file is created. Also retire the obsolete
$EXT variable.
Add the obligatory comment why we don't use bsdtar's compression.
Finally, fix mixed-tab-space indentation.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
We're ill equipped to be using this flag as we don't trap and respond to
the ERR signal. The result is that if is ever tripped, pacman-key will
instantly exit with no indication of why. At the same time, we're
already fairly good about doing our own error checking and verbalizing
it before dying.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents the error trap being set off when GPGDir is commented
in pacman.conf. Bug introduced in 507b01b9.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Always quote the right-hand side of expression when the == or != operator
is used, unless intended as a pattern.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
Always quote the righthand side of expression when the == or != operator
is used, unless intended as a pattern. Quoting bash(1):
When the == and != operators are used, the string to the right of the
operator is considered a pattern. Any part of the pattern may be quoted
to force it to be matched as a string.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
If '-' isn't the last item, it's interpreted as a range and not
literally, causing problematic behavior in parsing optdepends.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Keep the non-zero return val to let the caller know that the key wasn't
found.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Many PKGBUILDs use formatting whitespace when specifying optdepends.
This is removed when adding a package to a repo-database so the
output of "pacman -Si <package>" and "pacman -Qip <package file>"
becomes inconsistent. Instead, do the adjustment when creating
the .PKGINFO file.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allow the specification of versioned optdepends with an epoch.
This also (partially) enforces a whitespace between ":" and the
description which is required for the future optdepends parsing
code.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is similar to the 'foo-revoked' file we had. This will be used to
inform the user what keys in the shipped keyring need to be explicitly
trusted by the user.
A distro such as Arch will likely have 3-4 master keys listed in this
trusted file, but an additional 25 developer keys present in the keyring
that the user shouldn't have to directly sign.
We use this list to prompt the user to sign the keys locally. If the key
is already signed locally gpg will print a bit of junk but will continue
without pestering the user.
Signed-off-by: Dan McGee <dan@archlinux.org>
We're putting the cart ahead of the horse a bit here. Given that our
keyring is not one where everything is implicitly trusted (ala gpgv),
keeping or deleting a key has no bearing on its trusted status, only
whether we can actually verify things signed by said key.
If we need to address this down the road, we can find a solution that
works for the problem at hand rather than trying to solve it now before
signing is even widespread.
Signed-off-by: Dan McGee <dan@archlinux.org>
Unlike our protégé apt-key, removing a key from our keyring is not
sufficient to prevent it from being trusted or used for verification. We
are better off flagging it as disabled and leaving it in the keyring so
it cannot be reimported or fetched at a later date from a keyserver and
continue to be used.
Implement the logic to disable the key instead of delete it, figuring
out --command-fd in the process.
Note that the surefire way to disable a key involves including said key
in the keyring package, such that it is both in foobar.gpg and
foobar-revoked.
Signed-off-by: Dan McGee <dan@archlinux.org>
This finishes the cleanup started in 710e83999b. We can do a straight
import from another keyring rather than all the funky parsing and piping
business we were doing.
Signed-off-by: Dan McGee <dan@archlinux.org>
Otherwise we're hiding extremely relevant bits like this one:
gpg: WARNING: This key is not certified with a trusted signature!
gpg: There is no indication that the signature belongs to the owner.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Ensure usage message is indented correctly
* Show short filenames for both the gpg keyring and revocation file
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes build errors when performing a manual install straight to a
filesystem where the files already exist.
Reported-by: Sergej Pupykin <ml@sergej.pp.ru>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
4ed12ae tightened up the logic to use only find, but ignored the fact
that since the manpage hard link names were no longer captured. They
were created as separate compressed manpages, rather than as hardlinks.
This also introduces a minor efficiency of deleting all hardlinks at
once and using proper iteration over an array rather than a string.
Note to anyone else touching this code: e2fsprogs and libpcap are useful
for testing this. If that changes in the future, you can use the below
bash to locate others:
IFS=$'\n' read -rd '' -a a < <(find /usr/share/man -type f \! -links 1)
pacman -Qqo "${a[@]}" | sort -u
I broke it!
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
When a sourceball passes this check without any warnings, a newline is
omitted. Similar to the if clause of this else block, print a single new
line at the end of the clause instead of accounting for each output.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This prevents makepkg from aborting with 'file not found' when
changelog= or install= are declared in a PKGBUILD, but empty.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This is a fix for a bash3 specific bug, where a file sourced by
/etc/profile would exit non-zero and make its way back up to makepkg,
forcing it to exit after package installation. Along with unsetting the
ERR handler, temporarily unset errexit to avoid this.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
- display associated warnings on same line as pass/fail msg, to be more
consistent with checksum verification output
- properly error on a revoked key (matching pacman's behavior)
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
We seem to enjoy using bash regex capabilities, but never referencing
the result with BASH_REMATCH. Replace almost all regexes with equivalent
globs which are faster and functionally equivalent in these cases.
This enables the extglob shopt.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Don't just set the flag variables to zero length strings, actually unset
them from the environment. This fixes issues with broken gnu Makefies
that use ?= for assigment, where the presence of a var is enough to make
this condition avoid assignment.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
- Properly read each sorted line into a new array, instead of breaking
on every word.
- LC_COLLATE should apply to the sort portion of the pipeline, not the
printing.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This also renames '--receive' to '-recv-keys' to match the wrapped gpg
option name, rather than invent a new one, now that the calling
convention is the same.
Signed-off-by: Dan McGee <dan@archlinux.org>
We were using the mystical [<foobar>] options which is some sort of
cross between a <required> argument and an [optional] one. Remove this
madness and do some other general cleanup/consistency work in the
manpage.
Signed-off-by: Dan McGee <dan@archlinux.org>
The regex wasn't rooted at the end of the filename, nor was it matching
a period/dot before the file extension. The end result was this matched a
file named '07_all_sig.patch' which is totally broken.
Signed-off-by: Dan McGee <dan@archlinux.org>
Read the entire variable, respecting escapes, which are necessary to
retain for the successive eval.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Further improvments on 2ca27ab which will allow the changelog and
install script files to contain whitespace.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Broken in 2ca27a by me, trying to fix another problem.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows local signing of a given key to help establish the web of
trust rooted at the generated (or imported) master key.
Signed-off-by: Dan McGee <dan@archlinux.org>
This enables pacman-key, during --init, to generate a single secret key
for the pacman keyring if one is not present. This will be used as the
root of the web of trust for those that do not wish to manage it with
their own key, as will be the default.
This does not preclude later adding other secret keys to the keyring, or
removing this one- we simply ensure you have at least one secret key
available.
Signed-off-by: Dan McGee <dan@archlinux.org>
Any option that flips UPDATEDB=1 doesn't work right now due to what we
thought was a good idea in commit cab1379a1a. Fix this by not
including the update operation in the option count and special casing
it where necessary.
Also, bring back the helpful "Updating trust database" message.
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds a add_gpg_conf_option() helper function which tries to be
intelligent and only add not found options, and those which have not
been explicitly commented out.
The new options added are 'no-greeting', 'no-permission-warning', and a
default 'keyserver'.
Signed-off-by: Dan McGee <dan@archlinux.org>
* secring.gpg can be 600, readable by root user only
* ensure grep for lock-never option in check_keyring doesn't catch comments
Signed-off-by: Dan McGee <dan@archlinux.org>
The HoldKey option was undocumented and was not suited for pacman.conf.
Instead use the file "/etc/pacman.d/gnupg/heldkeys" to contain a list
of keys not to be removed from the pacman keyring with the --populate
option.
Signed-off-by: Allan McRae <allan@archlinux.org>
After most operations that touch the keyring, it is a good idea to
always run a check on the trustdb as this prevents gpg complaining
on later operations.
Inspiration-from: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
The optimization of only importing keys that were not to be later
revoked was a not smart enough. For example, if a key was
in both a repos keyring and its revoke list, alternate runs of
pacman-key --populate would add then remove the key from the pacman
keyring. This problem is made worse when considering the possibility
of multiple keyrings being imported.
Instead, import all keys followed by the revoking of all keys. This
may result in a key being added then revoked, but that is not much of
an issue given that is a very fast operation.
Signed-off-by: Allan McRae <allan@archlinux.org>
The current --reload option, apart from being non-clear in its naming,
is very limited in that only one keyring can be provided. A distribution
may want to provide multiple keyrings for various subsets of its
organisation or custom repo providers may also want to provide a keyring.
This patch adds a --populate option that reads keyrings from (by default)
/usr/share/pacman/keyrings. A keyring is named foo.gpg, with optional
foo-revoked file providing a list of revoked key ids. These files are
required to be signed (detached) by a key trusted by pacman-key, in
practice probably by the key that signed the package providing these
files. The --populate flag either updates the pacman keyring using all
keyrings in the directory or individual keyrings can be specified.
Signed-off-by: Allan McRae <allan@archlinux.org>
This is a safety measure to prevent simple code injection.
$ i="foo bar"
$ eval i="$i"
bash: bar: command not found
$ eval i=\"$i\"
$ echo "|$i|"
|foo bar|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If any of pkgver, pkgrel or epoch contained a variable substitution,
then it needed to be evaluated before checking its value conformed
to the rules.
[Dan: add quotes around RHS]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
makepkg --source is a often used go make source package like for AUR.
Have a -S shortcut will save the world.
Signed-off-by: Sebastien Luttringer <seblu@seblu.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
When creating a repo outside the current directory, the signature
symlink was not created.
Reported-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The use of warning once we had already started adding a package was
confusing as it broke the standard indent pattern. It was especially bad
if adding multiple packages as it wasn't clear what sub-messages applied
to which package being added. This should be an output change only from:
==> Adding package '/tmp/sync/netcfg-2.6.7-1-any.pkg.tar.xz'
-> Computing checksums...
-> Adding package signature...
==> WARNING: An entry for 'netcfg-2.6.7-1' already existed
-> Removing existing entry 'netcfg-2.6.7-1'...
-> Creating 'desc' db entry...
-> Creating 'depends' db entry...
to:
==> Adding package '/tmp/sync/netcfg-2.6.7-1-any.pkg.tar.xz'
==> WARNING: An entry for 'netcfg-2.6.7-1' already existed
-> Computing checksums...
-> Adding package signature...
-> Removing existing entry 'netcfg-2.6.7-1'...
-> Creating 'desc' db entry...
-> Creating 'depends' db entry...
Signed-off-by: Dan McGee <dan@archlinux.org>
These are equivalent. Use the autoconf macro for consistency.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This applies to the repo-remove man page as well as the script itself.
Yes Dan, I ran distcheck afterwards.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When adding a package to a repo, it is useful to be able to see
that repo-add has indeed found the signature file.
[Dan: update text to be more in line with other messages]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This also pulls in some early translations we had entered in Transifex
in the last day so those would not be lost. The diffstat is huge and not
very telling as usual, as all sorts of fuzzyness switches happened this
time around for some reason.
Signed-off-by: Dan McGee <dan@archlinux.org>
This moves us toward staring translations for the 4.0.0 release,
although this should not be interpreted as a string freeze by any means.
Signed-off-by: Dan McGee <dan@archlinux.org>
In this case, we skip the epoch versioning entirely, as if it were
declared as 0.
Prevents errors such as:
/usr/bin/makepkg: line 244: ((: ! : syntax error: operand expected
(error token is " ")
==> Finished making: cower-git :20110808-1 (Mon Aug 8 17:17:27 EDT
2011)
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The current --list option outputed the keys and all their signatures
which can be overly verbose. It also did not take a list of keys on
the command line to limit its output (although the code suggests that
was intended).
That patch brings consistency with gpg, providing --list-keys and
--list-sigs options that function equivalently to those provided by
gpg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently, pacman-key allows the user to import their keys using the --add
option. However, no similar functionality exists for importing ownertrust
values.
The --import-trustdb option takes a list of directories and imports ownertrust
values if the directories have a trustdb.gpg database.
The --import option takes a list of directories and imports keys from
pubring.gpg and ownertrust values from trustdb.gpg. Think of it as a combination
of --add and --import-trustdb
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allows the commands to safely handle any possible arguments
Signed-off-by: DJ Mills <danielmills1@gmail.com>
Allan: rebase patch
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the source integrity checking into its own function as the code
was duplicated and is now more complicated with the separation of the
two checks types.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allows the skipping of all integrity checks (checksum and PGP) or
either the checksum or PGP checks individually.
Original-patch-by: Wieland Hoffman <theminew@googlemail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Many projects provide signature files along with the source code
archives. It's good to check these, too, when verifying the integrity
of source code archives.
Not everybody is using gpg so the verification can be disabled with
--skippgpcheck.
Additionally, only a warning is displayed when the key that signed the
source file is unknown.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When epoch, pkgver and/or pkgrel were overridden in a split package
function, makepkg failed hard finding the real version for checking
if packages were already built or trying to install packages. Fix
the get_full_version function to deal with overrides and return the
actual package version.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We can override pkgver and pkgrel so it is only logical to add epoch
to that list
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Check any overrides of the "arch" variable contain the required
architecture.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Enforce syntax checking for pkgrel and pkgver overrides in package
functions.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
There is always someone who tries to break things (cough *Dave* cough...)
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a cleaner expression of the same information.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Makes sure that the pacman keyring is readable and that the user
has permissions to create a lock file if lock-never is not specified
in the gpg.conf file.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add an --init option that ensures that the pacman keyring has all
the necessary files and they have the correct permissions for being
read as a user.
Signed-off-by: Allan McRae <allan@archlinux.org>
This function had a variety of pitfalls, including the inability to
successfully find a key=value pair where no whitespace surrounded the
equals sign. Make it more robust by splitting the line on the equals
itself, and performing whitespace trimming on the resulting key/value
pair.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Follow the example of gpg and only allow a single operation to be
specified each time. Prevents having to deal with conflicting
variable names and potential issues due to the order in which the
operations are run.
Signed-off-by: Allan McRae <allan@archlinux.org>
This moves the processing of the --edit-key and --receive options
to functions, keeping the final option processing to be all single
line statements.
Also rework the --edit-key option to validate all input before
processing.
Signed-off-by: Allan McRae <allan@archlinux.org>
This commit correctly redirects to /dev/null the output of several
commands that get executed on logic checks.
Original-patch-by: Denis A. Altoé Falqueto <denisfalqueto@gmail.com>
Signed-off-by: Ivan Kanakarakis <ivan.kanak@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This keeps the naming of the option more consistent with what is
actually being called by gpg.
Original-patch-by: Denis A. Altoé Falqueto <denisfalqueto@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This commit adds quotes to several variable assignments. Unquoted values
can cause problems on several occasions if the value is empty. It is
safer to have every assignment quoted.
Signed-off-by: Ivan Kanakarakis <ivan.kanak@gmail.com>
The conversion to using parse_options causes this option to break.
It is preferable to remove the option rather than fix it as it is
simply a wrapper for "gpg --homedir @sysconfdir@/pacman.d/gnupg".
Any user using more advanced keyring management than provided by
pacman-key can manage to point gpg at the right place themselves...
How to manually edit the keyring with gpg will instead be documented
in the man page in a later commit.
Signed-off-by: Allan McRae <allan@archlinux.org>
The pacman-key script is complicated enough to warrent usage of the
parse_options script. This is especially helpful in dealing with
all the configuration file override flags as the no longer need to
be specified first. It also allows us to do the right thing early
with --help/--version and no option cases cleanly. This change also
makde the check for root privileges only occur on operations where
they are needed.
This patch is inspired by and supercedes some patches submitted by
Denis A. Altoé Falqueto and Ivan Kanakarakis who were altering the
previous option handling in an attempt to deal with the above issues.
Signed-off-by: Allan McRae <allan@archlinux.org>
Specifying a filename with spaces in a PKGBUILDs noextract array fails
due to a lack of quoting.
Fixes FS#25100.
Reported-by: Thomas Weißschuh <thomas_weissschuh@lavabit.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The full path to the signature file when it is created is in a temporary
directory so only print the filename.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents a dangling symlink being left behind if the repo goes
from being signed to unsigned.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
There is no need for a writable PKGDEST when using the --nobuild or
--geninteg flags.
Allan: added --geninteg
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Put a .gitignore entry at the right level and sort that file
alphabetically.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We nuke it from the completion file as well along with its longopt.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The '[[ -z' test in in_array() is redundant, so remove it.
Signed-off-by: DJ Mills <danielmills1@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Instead of hacking around the error trap, simply do an explicit
test for failure.
Signed-off-by: DJ Mills <danielmills1@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This adds the '.tar.Z' option to both repo-add and makepkg for no other
reason than "why not", and because bsdtar supports it natively with the
'-Z' flag. Also update the documentation accordingly.
Signed-off-by: Dan McGee <dan@archlinux.org>
If you are keeping a copy of the old database, you probably want
to keep a copy of its signature too. Also, delete the previously
backed-up database signature if no new one is being copied.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The lone quotation mark in "pacman's" causes issues for some syntax
highlighting. Change the printing of the nessage from echo to printf
so we can invisibly escape it.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allow command-line options to accept multiple arguments without
additional quoting by taking the list of arguments until one
starting with a "-" is reached.
The only current use of this is the --pkg option in makepkg. This
allows (e.g.)
makepkg --pkg foo bar
and packages "foo" and "bar" will be built.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows options specified with a trailing "::" to optionally
take arguments.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
vim recognises what type of shell script it's dealing with by looking at
the shebang. If detection fails it falls back to sh which doesn't
support some bash features. Adding a normal, possibly broken, shebang
which gets fixed by the Makefile allows vim to detect bash syntax.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
Revert to the old behavior that 6f5a90 attempted to simplify and go with
the original proposed solution of using "ugly" bash to detect empty
directories.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We fubar-ed this pretty good.
1. The whole old/new move shuffle was totally busted if you used a
relative path to your database, as we would just build the database in
place.
2. Our prior temp directory layout had the database files extracted
directly into it. When we tried to create a xxx.db.tar.gz file in this
same directory, due to the fact that we were no longer using a shell
wildcard, we tried to include the db in ourself, which is a big failure.
Fix all this by extracting to tree/ so we can have a clean top-level
temp directory.
3. Fix the inclusion of the './' directory entry; ensure the regex
prunes both leading paths of '.' as well as './'.
Where is that test suite again?
Signed-off-by: Dan McGee <dan@archlinux.org>
Otherwise there is no way to easily test or run with a standalone config
file without outside interference.
Signed-off-by: Dan McGee <dan@archlinux.org>
The path was not being stripped from $file before prefixing with
$srcdir resulting in the attempted removal of a very weird
filename.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We already use msg() and error() in here, might as well just use the
standard functions. In addition, fix one translated message that would
have printed ERROR twice if anyone ever saw it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Allow one of 4 archive extensions: .tar{,.gz,.xz,.bz2} for each of the 2
valid repo extensions: .db and .files. Check for this via
'verify_repo_extension' directly after option parsing to assert that
this extension is present, and again after files have been added to get
the proper archive option for bsdtar.
Signed-off-by: Dave Reisner <d@falconindy.com>
Dump the whole conditional and filter the contents of the directory to
create an empty or non-empty archive.
Signed-off-by: Dave Reisner <d@falconindy.com>
Fixes FS#24893.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This ranks high on the code readability scale. The same function formats
all of our data and writes to the metadata file at once.
Signed-off-by: Dave Reisner <d@falconindy.com>
Fields like groups and depends should be stored as arrays. This requires
rewriting our write_list_entry function to accomodate our new data type.
This new function will not write to a file, but rather only format it.
Signed-off-by: Dave Reisner <d@falconindy.com>
grep and sed aren't needed here, and this removes the truly ugly
manipulation of IFS. The process substituion could just as well be a
herestring, but it breaks vim's syntax highlighting. Style over
substance, mang.
Signed-off-by: Dave Reisner <d@falconindy.com>
* 'master' of git://projects.archlinux.org/pacman:
pactree: carry a list of databases for dep resolution
makepkg: Remove a lone quotation mark
makepkg: remove the cleancache option
Don't require a transaction for sync DB updates
Move locking functions to handle
Add a 'valid' flag to the database object
Move database 'version' check to registration time
Do database signature checking at load time
This is a fairly useless feature given all it does is an "rm" on a
directory. It is also unlikely that you would want to remove the
entire SRCDEST anyway, but rather just the old files.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
There was a lot of inconsistency in how strings that should not be
translated (program names, option flags, PKGBUILD directives, etc) were
handled. This patch moves them all outside the gettext invocation for
consistency and to prevent accidental translation.
Note that some of these may need reverted if they cause difficulties in
translation due to gettext usage in bash not taking positional parameters
for arguments. A quick survey of current translations indicates that this
issue will be rare. Also, we should be able to catch these before a full
string freeze given we are going to probably need a "developer preview"
release before the next release series.
Signed-off-by: Allan McRae <allan@archlinux.org>
b899099 made path checking a bit more strict than I had intended, and
would actually forbid creation of a repo in $PWD if only the filename
was specified. readlink would be the fun and easy solution here, but
it's avoided due to portability issues, making the validation process a
bit more verbose.
Signed-off-by: Dan McGee <dan@archlinux.org>
This has gettext strings, but wasn't added to the list of files in
POTFILES.in just yet. Add it and update the catalogs.
Signed-off-by: Dan McGee <dan@archlinux.org>
Now that we have performed the split, prune the catalogs of all
pacman-only messages.
All old messages were pruned from the files using the following command:
sed -i -e '/^#\~/,' *.po
Note: the diff on this commit looks much less insane if the --patience
option is used.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the first step at separating the pacman message catalog and the
scripts message catalog. Makefiles, configure.ac, and other such files
are adjusted accordingly, as well as renaming files. The TEXTDOMAIN of
scripts is also adjusted.
Note that no actual pot or po files get changed here; these will get
pruned in a future commit so each catalog contains only the necessary
messages.
Signed-off-by: Dan McGee <dan@archlinux.org>
Way back in c94bfbaba when refactoring makepkg options handling, I added
these lines to unset MAKEFLAGS if '!distcc' was set in a PKGBUILD (not
taking into account makepkg.conf settings). This was an attempt to say
"if it is broken in distcc, it is probably broken even more". However,
this is silly as one should be using '!makeflags' as well. Remove the
linkage.
Signed-off-by: Dan McGee <dan@archlinux.org>
Unify function braces to be top right opening, bottom left closing.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a function that checks for the software needed by makepkg to
process a PKGBUILD with the requested options. This allows makepkg
to bail early in the packaging process.
Many other checks can be added to this function...
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Contractions are less clear for non-native speakers so should be
avoided (and cause syntax highlighting issues). Also, the 'provides'
and 'depends' strings are not to be translated.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a BUILDDIR variable (which can be overridden in the environment)
to specify an alternative location for building the package. This is
useful for people who want to build on a different filesystem for
improved performance (e.g. tmpfs).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch enables the automatic compression of executable binaries
using UPX when the 'upx' options is specified in makepkg.conf or the
PKGBUILD. Additional arguments can be passed to UPX by specifying
the UPXFLAGS variable.
Original-patch-by: Bryce Gibson <bryce@gibson-consulting.com.au>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Previously, the error message when trying to add to a repo where a
parent directory didn't exist was:
==> ERROR: Failed to acquire lockfile: /path/to/noexist/repo.tar.gz.lck
This sucks. Make an explicit check to ensure that the path to the repo
really does exist, and throw a meaningful error message when it can't be
found.
Dan: reuse an existing (translated) error message.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
A plain '.tar' ending should be allowed. This corresponds to how we
handle this extension in makepkg. Also fix up the other extension
checks, which were missing a leading '.' character.
Signed-off-by: Dan McGee <dan@archlinux.org>
Create source package files inside the fakeroot environment to
ensure reasonable ownership of files within the archive.
Fixes FS#24330.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We no longer have any python scripts in our scripts/ directory so
we can simplify the makefile a bit.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Provide consistent error messages for unknown long and short options.
Also get full string translation for the messages.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a README file to briefly document the code snippets in the scripts
library folder.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the common output formatting functions into a separate
library file and import that into each script. makepkg is
excluded due to its additional color formatting.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This move the getopt replacement function parse_options out of
makepkg.sh.in and into a separate file. The code is inserted
into the relevant place in makepkg using m4.
This will allow the reuse of the option parsing code in other
scripts (i.e. pacman-key) while avoiding code duplication.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Clarfiy that it is unwanted files are being removed rather than "other"
files (whatever they are...).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Our scripts all currently say:
Generated from foo.in; do not edit by hand.
Fix this to say foo.sh.in, which is the actual original file name.
Signed-off-by: Allan McRae <allan@archlinux.org>
