Also cleaned up some duplicate printf lines related to the ShowSize option.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This change allows us to use all autoconf specified paths, most notably
$(localstatedir). It is quite a change and touches a lot of files, as
all references to the DB and cache were done with the ROOTDIR as a prefix.
* add --lock command-line option to pacman to specify the location of the
lockfile (this can now be specified at configure time by setting the
$localstatedir path).
* Rip quite a few settings out of configure.ac as they are now picked by
setting the paths during configure or make.
* Fix bug with /tmp fallback for sync downloads not working correctly
(related to root location, now the system tmp dir is used).
* Simplified the parameters to some libalpm functions, and added get/set
for the new lockfile option.
* Renamed several of the DEFS to names without the PM_ prefix.
Signed-off-by: Dan McGee <dan@archlinux.org>
Small change (addition of a 'strreplace' function) which replaces
any $repo tokens found in a server line with the name of the repo
or section being processed.
While this is more simplistic than suggestions on flyspray, it works
and I think it is cleaner. Merits can be discussed further.
Ref: FS#6389
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Reorder package version checking so there is no output when a
package is listed in IgnorePkg.
Closes FS#7111
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Fix for FS#7133 - when DB scanning finds an invalid named entry,
scanning is currently aborted. Instead we will simply skip it
and find the next valid package.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Simple clean up for the rest of the code, which also prevents a little
libdownload bug relating to '//' appearing in URLs.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Hackish fix to ensure libarchive extracts files and dirs with the right
permissions. For some reason extracting /tmp on install wasn't handled properly
by librachive, so an explicit chmod will fix this.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
The old function did too much on its own; let alpm_depcmp do the hard
work. This will allow for future versioned provisions if necessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
We had many unnecessary casts, most of them dealing with malloc and
other memory allocations. The variable type should take care of it;
no need to do it explicitly. In addition, I caught a const error while
removing the casts.
Signed-off-by: Dan McGee <dan@archlinux.org>
Allow IgnorePkg (or --ignore) to work for _either_ side of a
replacement. For example, if 'foo' is set to replace 'bar',
ignoring either package will skip this replacement.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
* Remove some unnecessary conditional compiling in util.h- move the
functions tha required it to trans.c (along with a bunch of new header
includes).
* Clean up util.h a bit- remove some header includes, remove universal
libarchive include and only put it in the files that need it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove inclusion of libintl.h from all files, because we can do it once
in util.c where the _() macro is defined.
Signed-off-by: Dan McGee <dan@archlinux.org>
Somehow missed this earlier when changing everything to types.
unsigned short -> pmloglevel_t wherever necessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
Unification and cleanup of the add.c and remove.c code. It looks remarkably
similar, so this may be a candidate for functionalization at a later time.
Signed-off-by: Dan McGee <dan@archlinux.org>
In order to get more reliable message statistics, I updated all of the
po files by first doing a make *.pot-update followed by a make. I am
holding off on committing the pot files as this causes issues with make
constantly wanting to rebuild them.
Signed-off-by: Dan McGee <dan@archlinux.org>
Several important paths, file locations, and extensions were #define-d in the
source code instead of being configurable. This moves all of these to
the configure script where they can be picked upon running ./configure. We
may later want to make some of these even more visible and move them to
pacman.conf.
Signed-off-by: Dan McGee <dan@archlinux.org>
We haven't done a whole lot with Doxygen so far, so this updates some of the
things that have changed a lot- namely, the now public exposure of alpm_list.
All functions in this file have now been Doxygen commented, and a few other
things in alpm.c were fixed as well. In addition, the Doxygen config file
was updated.
Signed-off-by: Dan McGee <dan@archlinux.org>
* --ignore was being ignored (haha) on sysupgrade when a package was listed
as being a force upgrade. This adds a prompt to the user in this case asking
what to do.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Move all .cvsignore files to .gitignore for switch in VCS. In addition,
delete ones that were unnecessary because they only contained Makefile
and Makefile.am.
Signed-off-by: Dan McGee <dan@archlinux.org>
work of fixing these in the translation files, and I removed a few fuzzys
while doing so. If any more patches for translations come, try to do it
against these files.
* Ran msgmerge on all po files from new pot files, but did not check in the
updated pot files as that just causes problems.
* Updated Italian translation
Giovanni Scafora <linuxmania@gmail.com>
* Updated Russian translation, added libalpm partial translation
Владимир Байраковский <4rayven@gmail.com>
* Updated Hungarian translation
Nagy Gabor <ngaba@petra.hos.u-szeged.hu>
* Updated French translation
solsTiCe d'Hiver <solstice.dhiver@laposte.net>
Thanks again guys!
* More significant error messages when -Qo fails
* Potential fix for reported error that pacman indicates corrupt packages
when space is full on the cache dir
duplicated.
* Updated the util Makefile.am to link with the proper libalpm.la.
* Fixed bitmasking issues in be_files.c and db.h.
* Rankmirrors updates from James Rosten (with some cleaning up of my own).
KeyboardInterrupts are now handled gracefully.
the alpm strcmp operation which takes void* references.
* We had this great visibility patch, but never actually took advantage of
it. Added the right compile flag to make it work and added some more
SYMEXPORTs where necessary to have a successful compile.
Giovanni Scafora <linuxmania@gmail.com>
* long -> float conversion for package size output (which still may be the
wrong size, this needs to be looked at)
- Check EACCES in can_remove_file, to verify - we're only checking for a
read-only FS here... if write permissions fail, we can still remove it
- Switched the message when creating DB directories from an error to a debug
message
* Fix the dep tests once and for all (it wasn't working for provides=()
packages)
* Some header cleanup on the pacman side of things - we had alpm.h instead
alpm_list.h in a few headers.
* removed an extra slash in path-building snprintf in server.c.
reordering and adding ones that were forgotten (noticed when trying to
compile after reordering).
* Updated the HACKING file to include information on #include usage.
* print -> vprint in "making dir" function in pactest.
Translators and developers should count this as the string freeze unless
something REALLY essential comes up. Send in patches to these translations
when you get a chance (and patches are appreciated, as they are much easier
to deal with).
specified
* Use db->path when appropriate
* Commented out the FAKEROOT checks in libalpm. This should never ever be done.
TODO test this quite a bit, as this will never cause the transactions to fail
if RW operations are requested... right now it is totally up to the front end
to decide when to fail
* Use realpath() to canonicalize the root path when specified, so
_alpm_makepath() doesn't freak out
* Fixed some output/indent of MDFile and SHAFile algorithms
* More efficient sprintf() usage in MDFile/SHAFile
* Added real error output to _alpm_makepath
occasions where some alpm stuff could be used without initializing the
library (vercmp is one). TODO make these functions (handle accessors)
better by returning "library not initialized" instead of failing.
* Removed NoUpgrade lines from pacman.conf - we need to test this!
* Re-corrected the lib targets for src/util/*
* make dist seems to have updated the po files
it. Eventually we'll make progress.
* Rewrote the _alpm_splitdep function to behave more like all our other
function calls. Use heap instead of stack allocation for the depend struct,
so now it needs to be freed by the caller.
* Moved entirely to alpm_pkg_get_* accessors, to read data on demand
* Mostly removed the INFRQ_ parameters from outside the be_files backend (making
the backend more extensible in the long run)
* packages created from _alpm_db_scan now have the db and origin set (making
accessors actually work for these packages)
* removed _alpm_db_ensure_pkgcache
* totally revamped the _alpm_checkconflicts function, making it cleaner and
easier to read (and thus fix in the long run) - maintainable code ftw
NOTE: feel free to rename the functions... I couldn't think of anything better
* removed an extra loop in sync.c:find_replacements - no sense in looping over
an entire DB while strcmp'ing the name, when we have get_pkgfromcache
Other:
* package struct "license" -> "licenses"
* Created _alpm_sync_find (duplicate code in some places, find_pkginsync
* Minor const correctness changes along the way
* fixed a couple extra '/' pathing issues (non-issues really)
* removed a duplicate pkg_cmp function
allows for the same bit operators to be used across the board on pkg_get
operations.
* Changed name of INFRQ_NONE -> INFRQ_BASE to more clearly reflect what it
does (loads pkg name and version).
* Added a few missing things on package functions, such as SYMEXPORT and
ALPM_LOG_FUNC.
* Slight updates to pmenv to print 'pass' and 'fail' instead of 'passed' and
'failed'. Keeps output a bit more concise.
* Fixed a doxygen comment spelling error. :P
* Added some provision switching hackery. This could probably use some
refactoring,.. it solves the following case:
pkg1 and pkg2 provide 'foo' and are both installed
pkg3 depends on 'foo' and so lists 'pkg1' in the REQUIREDBY db section
pkg1 is upgraded and no longer provides 'foo'
** This code ensures that the REQUIREDBY of pkg3 is updated to require pkg2
now instead of pkg1
about bigger DB changes later, but lets not screw anything up for release.
* Removed some weird uses of "not ... ==" usage in pactest- correct me if I'm
wrong, but isn't "!=" a lot more clean and concise?
* Print description of failed tests in the pactest summary. This could get
dirty with a lot of failed tests though, so watch out.
for and is a dependency of another package. (upgrade057)
* Removed man2html stuff from doc/Makefile.am.
* Patch: improved depends checking in _alpm_checkdeps
Nagy Gabor <ngaba@petra.hos.u-szeged.hu>
* Slight revisions to pmrule.py to allow for a PKG_PROVIDES test.
* Very quick updates to the pactest README.
* Added rules to some of the newer upgrade tests. Note: upgrade055 now fails
due to requiredby entries not being written packages that are dependencies
in a provides role.
* Unified some functions names "package" -> "pkg" for consistency
* Removed the goofy 'faketarget' stuff used for dep testing
* Renamed alpm_pkg_isin -> alpm_pkg_find
* Renamed alpm_db_readpkg -> alpm_db_get_pkg
Giovanni Scafora <linuxmania@gmail.com>
* added '-fstack-protector' flag to debug compile, to catch any buffer
overflows we may have in stack variables.
* Updated all of the language files, as the POT file was updated. NOTE FOR
TRANSLATORS, try to base your next contribution off of these, notice how
some msgids and messages have been wrapped to the next line- it makes it
easier to read anyway.
* More Makefile.am/configure.ac updates. 'make dist' and 'make distclean' now
work properly, with only one caveat- the automatic testing in distclean
doesn't do so hot as it is compiled with a default configure, which includes
the fakeroot-proof code (which does not cooperate with pactest).
* Added a Makefile.am for the pactest directory.
* Fixed conflict checking. I had mistakenly assumed that the transaction
packages were of type 'pmsyncpkg_t', but that is not the case. Reverted back
to pmpkg_t's and fixed some checking a bit.
* pactest results: PASSED = 71 (100.00%)
* Fixed a segfault in the conflict checking code
* Added an automatic failure in the case of -A/-U for a replacement of an
existing package. This requires a large amount of work and is postponed for
now. Example:
If ncmpc is installed, pacman -U /path/to/ncmpc-svn.pkg.tar.gz will fail
with and appropriate error message
properly
* Error when re-reading the DB for replacements, wrong info level
* Removed an duplicate debug message "checking for package replacements"
* Check ignorepkg for REAL upgrades...
* Properly check the NOSAVE flag
* some unlink_file (remove.c) cleanup
* fix indent level on handle.c
* Force libalpm paths to end with a '/' char
* Fixed 'target' looping in conflict.c (pmsyncpkg_t, not pmpkg_t)
* Added some debug output to cache and db scanning
** All pactest tests succeed again, yay **
from one package to another seemlessly (knock on wood). This is implemented
through the use of two skip lists in the trans struct- skip_add and
skip_remove, which replace the former trans->skiplist.
* Removed an unnecessary function parameter, added a necessary one.
* If a package has no backup files, print '(none)' under the heading so it is
more obvious.
* Updated my TODO list.
- the code should be clearer, more organized, commented, and have worthwhile
variable names now
- proactive backup=()s now work. That is, adding a file to a backup array
does what it should on the upgrade to that package, no longer forcing you to
wait a full upgrade cycle for it to take effect
* ldconfig was being run twice on an upgrade operation - fixed
* fixed another pm_fprintf/printf output corruption with the progress bars
* refactored some duplicate code for adjusting 'requiredby' lists
* Added config.rpath to .cvsignore
* Updated pot translation templates
* Located culprit of progress bar moving when unicode characters are used,
added a TODO note about it
* Removed '(target)' string from the sync.c error message, just like we did
from add.c yesterday
* Updated my TODO
unbelievable amount of strcmp() calls (25 million) due to the list searching.
This has been reimplemented with a set-intersection scheme, due to the fact
that file lists are always ordered. - NEEDS TESTING
* Minor clean up, "globalized" the str_cmp helper to match the alpm comparison
signature, so we can use it elsewhere.
descriptions, nor do we actually build them with the newest makepkg. The actual
implementation in here seems like it could be done better, and it soaks a large
amount of CPU time according to profilers.
from the PKGINFO, and size is the stat() size of the archive
* Removed the useless 'output' param from package.c:parse_descfile
* Installation progress
- Call progress callback once at 0% for initialization
- 'needdisp' was useless
- alpm_list_count is called an excessive amount in these nested loops. Now we
only call it once per iteration
- Use the compressed sizes for PROGRESS calcs as uncompressed (isize) is not
exact (it is missing metadata sizes), and thus produces > 100% numbers
* Cleanup up some error enum values
* Revamped the 'pmserver_t' functionality. Less allocation,
removed a param and cleaned up some duplicate URL parsing
* Makefile targets to rebuild po files now work - use 'make update-po' in
the po directories.
* Added two new translation templates as requested on the ML- 'it' and
'pt_BR'.
This commit might be a bit big for the mailing list to like on the commit
message. :)
packages to be upgraded in a -Su operation. Much of the code is duplicated from
sync.c.
TODO: move the implementation to upgrades.c, and reimplement the sync_sysupgrade
function in terms of this:
trans->packages = alpm_get_upgrades();
operations (now aborts on a corrupt archive)
* Fixed the pm_fprintf newline error that was plaguing us. It seems a line
resetting 'neednl' was removed a while back (by me). This causes all the
output errors we've been seeing
* scan loops no longer abort on corrupt entries
* reloading a cache package (and discovering it corrupt) no longer prints 2 messages
and uses the pre-build "remove from package cache" function
NOTE: The TODOs in there are important for later w.r.t. cleaning up corrupt DB
entries but there are some logical complexities with doing so, so I'm holding
off for now.
* The --debug params were goofy. New setup allows --debug without params,
--debug=<level> where level 1=debug output, 2=debug and download output,
3=debug, download, and function tracing output. This seems more sane to me.
* Removed PM_LOG_FLOW1 and PM_LOG_FLOW2. They were just confusing. When adding
new functions, it is near impossible to determin if your output should be
"flow1" or "flow2" without tracking all the way up the call chain. Rarely
would one ever say "ok, lets just show "flow2" output. These have both been
replaced with PM_LOG_DEBUG
* Removed the need for the root parameter on alpm_initialize. it is now
defaulted to PM_ROOT just like dbpath and cachedir. This allows alpm to be
initialized BEFORE option parsing in the front end, saving us some duplicate
variables in the frontend.
* Cleaned up front end variables due to early alpm_initialize call.
* Fix up add.c a bit better than it was in regards to FS #3492.
* Optimized the sqrt call in dependency cycle checking to a single call.
* Removal of an outdated comment.
* alpm_list_is_in --> alpm_list_find
* alpm_list_is_strin --> alpm_list_find_str
* Flip parameters of both functions to be inline with rest of alpm_list.
First commit, woohoo.
* Added alpm_list_remove_node for single list node removal
* Proper error checking/output for failed db_read/db_write (missing files)
* Invalid packages (missing files) are now removed from the package cache
* -Qs and -Ss output now look the same
* config.rpath causes errors on one machine I had, so I added it to CVS
* Fixed a "clobbered memory" issue when installing groups - only the outer list
should be free'd, not the contained data
optimizations in order to make the code much more readable and
type-checkable. Every enum in the library now has it's own type that
should be used instead of the generic 'unsigned char'. In addition,
several #define statements dealing with constants were converted to
enums.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
* Fixed -Ss output so as not to call alpm_list_getdata with a NULl list
* Added a NULL check in alpm_list_getdata
* Fixed alpm_list_add_sorted to properly handle a new / beginning insertions
* renamed pmlist_t -> alpm_list_t
* made alpm_list_t a public type (alpm_list.h header)
* removed additional storage for registered DBs in pacman source
* some code cleanup
* removed duplicate (pm)list_display functions from pacman source
* misc code cleanup
* Removed some unnecessary headers and library links
* Made things static if possible
* Cleaned up makefiles a bit
* Fixed some old comments in the code
* Fixed some errors the static code checker splint pointed out
* Backwards arguments in a memset call in _alpm_db_read (could have been worse)
* Other various small fixes
Other:
* Default to 80 columns when getcols cannot determine display width
* Removal of ._install as a valid install file in packages
Addition of a forced fflush in an attempt to diagnose mutli-logging
Removal of varargs from the internal logaction function, they are handled in
alpm_logaction just fine
* avoid repeated regex compilations (regex for search string do not
change while scanning the package database)
* remove needless string duplication (regex function do not change target
string nor free them)
* code cleanup
This patch improves search performance:
bash-3.2$ time ./src/pacman/pacman.static.old -Ss "(database|web).*server" >/dev/null
real 0m1.026s
user 0m0.544s
sys 0m0.208s
bash-3.2$ time ./src/pacman/pacman.static -Ss "(database|web).*server" >/dev/null
real 0m0.777s
user 0m0.456s
sys 0m0.128s
bash-3.2$
* Modified some dependancy checking
* Changed "performing local database upgrade" message to be more clear
* Change 'usize' to 'isize' in database files
* Scriptlet output is now sent to pacman's log file
* Limited some debugging output to be more clear
* libalpm api changes - move from a _getinfo(p, WHAT_WE_WANT) scheme to a
typesafe _get_what_we_want(p) scheme [not 100% complete yet]
* some const correctness changes
* removal of PM_* types in alpm.h in favor of the pm*_t types used throughout
libalpm
* Addition of hacky architecture check in the _splitname function
* Removal of libfetch from the archlinux proper - it has been renamed to
libdownload and can be found at http://phraktured.net/libdownload
* Merge of _some_ of the Frugalware makepkg change - this may still be
incomplete
* Removal of libftp from cvs proper
* PKGBUILD manpage now says 'PKGBUILD' instead of FrugalBuild (he he)
* Accidental database read of a file-based package (whoops)
* Proper fetching of url-based -U or -A
Removed some newlines from _alpm_log calls, to make debug output more concise
* Furthered the "lazy caching" to force the pkgcache to read nothing
(INFRQ_NONE) by default. Anything requiring package data should now check
the infolevel of each package and attempt to update it. This could be
ironed out a bit more later (by using the front-end get_info function
* Switched to libfetch. Drastic changes to the download code and the callback
progress bar functions. Also fixed the return value of
_alpm_downloadfiles_forreal. Downloading now supports http, ftp, https, and
files urls, along with 'mtime's and numerous other fancy features from
libfetch.
This should be changed later, or at least everything fixed up. Typically a 1
return indicates "an error occured" and some functions still might just return
error on failure.
* Removed the PMList typedef, in favor of the same naming scheme other
structs use 'pmlist_t'
* Added a time stamp on debug output, to make it more informational
* Moved alpm_db_register to _alpm_db_register, making the public function
not take a callback parameter
if pacman is desiganted as a target in a sysupgrade operation, it should be able to upgrade itself first upon user request.
- removed uneeded sanity checks in alpm interface calls
- replaced printf by MSG in pacman
