This makes several small adjustments to our exposed method names, and in
one case, parameters. The justification here is to make methods less odd
in their naming convention. If a method takes an alpm_db_t argument, the
method should be named 'alpm_db_*', but perhaps more importantly, if it
doesn't take a database as the first parameter, it should not.
Summary of changes:
alpm_db_register_sync -> alpm_register_syncdb
alpm_db_unregister_all -> alpm_unregister_all_syncdbs
alpm_option_get_localdb -> aplpm_get_localdb
alpm_option_get_syncdbs -> aplpm_get_syncdbs
alpm_db_readgroup -> alpm_db_get_group
alpm_db_set_pkgreason -> alpm_pkg_set_reason
All methods keep the same argument list except for alpm_pkg_set_reason;
there we drop the 'handle' argument as it can be retrieved from the
passed in package object.
Signed-off-by: Dan McGee <dan@archlinux.org>
The pacman-scripts catalog is omitted here due to various newline errors
I don't have the time to fix right now.
Signed-off-by: Dan McGee <dan@archlinux.org>
We hardly need the complexity (or slowness) provided by the libm power
function; add a super-cheap one that suits our needs and is specialized
for the values we plan on passing in.
Signed-off-by: Dan McGee <dan@archlinux.org>
Dan: don't compute lower bound unless needed, flip argument order so
out values are last, add param Doxygen documentation.
Signed-off-by: Dan McGee <dan@archlinux.org>
Rework the frontend and backend to allow passing a ratio value in for
UseDelta rather than having a hardcoded #define-d 0.7 value always used.
This is useful for those with fast connections, who would likely benefit
from tuning this ratio to lower values; it is also useful for general
testing purposes.
The libalpm API changes for this, but we do support the old config file
format with a no-value 'UseDelta' option; in this case we simply use the
old default of 0.7.
We clamp the ratio values to a sane range between 0.0 and 2.0, allowing
ratios above 1.0 for testing purposes.
Signed-off-by: Dan McGee <dan@archlinux.org>
The entry's name is only used when not "." or ".." so only print the
string then.
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently, a transaction is considered to be purely package removal
until the first package install is found. This resulted in the
removed packages at the start of a combined upgrade/removal transaction
not getting the "[removal]" output.
Fixes FS#27981.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When asking question and stdin is piped, the response does not get printed out,
resulting in a missing \n and broken output (FS#27909); printing the response
fixes it.
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This removes the hack I added to skip '*.sig' files earlier since there
are other files that also fall into the same bucket- source packages
from `makepkg --source`, delta files, etc. Rather than prompting for
each and every one, simply skip them. Doing '-Scc' rather than '-Sc'
will delete these files if that is really what you want to do.
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds an additional check step to find files in the local database
that claim to be owned by more than one package at once, which is
definitely not a supported setup.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't need absolute floating point precision at all here; we can
stick to integer land and use milliseconds which are precise enough for
our purposes. This also removes most floating point math out of the
non-update code path.
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead of returning the same value as the parameter to this function,
return the length of the string, which can be useful to the caller when
its non-zero (e.g. to find the end of the string).
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Pacman assumes that the final character of a line specifing a repo
in pacman.conf is a "]". But it did not clean whitespace from the
line after removing any comments. So lines like:
[allanbrokeit] # could break system
caused pacman not to recognize the repo. Adjust config parsing to
strip comments before trimming whitespace from the end of the string.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Ensures that config.h is always ordered correctly (first) in the
includes. Also means that new source files get this for free without
having to remember to add it.
We opt for -imacros over -include as its more portable, and the
added constraint by -imacros doesn't bother us for config.h.
This also touches the HACKING file to remove the explicit mention of
config.h as part of the includes.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
As per HACKING file, we use 'CTRL(' rather than 'CTRL ('
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If someone specifies a bogus line such as
pacman -S baz adsf/boo base-devel
we are better off trying to process all targets and showing all relevant
errors before exiting. This is easier in -U and -R operations where we
aren't dealing with groups, but here we attempt to skip group selection
once we know a target has errored to avoid cluttering the output and
hiding the real problem.
Signed-off-by: Dan McGee <dan@archlinux.org>
If an early target fails, we stopped processing the rest of the list. We
should continue all the way through and show relevant errors for each
target if possible, and error out only at the end.
We do process all targets to check for URLs first and will error out if
some could not be processed; we then do a second loop and try to load
each target specified on the command line.
This mirrors a patch by Allan to do the same for removal operations.
Signed-off-by: Dan McGee <dan@archlinux.org>
On a removal operation, pacman currently reports an error for the
package that is not found in the database and then exists. Adjust
so that all unknown packages are reported.
Before:
> pacman -R foo bar
error: 'foo': target not found
After:
> pacman -R foo bar
error: 'foo': target not found
error: 'bar': target not found
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Add last-minute changes to NEWS
* Don't treat '_' or '_n' special in scripts when finding translatable
strings; this breaks with one use of `read` and a dummy _ variable
Signed-off-by: Dan McGee <dan@archlinux.org>
This is consistent with the other enums and structs, and should be
slightly more readable.
Signed-off-by: Jonathan Conder <jonno.conder@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Bump the version, update the translation template files, and fill in
NEWS with relevant commits and changes since 4.0.0.
Signed-off-by: Dan McGee <dan@archlinux.org>
Allan's original message: Occasionally when the download rate showed
100.0 the output got messed up. This was caused by the rounding of a
number between 99.95 and 100. Adjust the threshold to avoid this
rounding issue.
Dan: make this fix, but also show values between 0 and 9.995 with two
decimal places since we have the room.
Original-fix-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
On -R operations, the "New Version" column is always empty, taking up
space and not really showing the user anything valuable. The same is
true on -S or -U operations for the "Old Version" column when packages
are only being installed and not upgraded.
Remove this column so we get a few screen columns back, especially now
that we show repo/packagename style output. This also makes some
adjustment to the padding logic. We no longer include padding in column
widths but it is included in the total table width. We also ensure the
last displayed column is always right aligned, even if this is not the
actual rightmost column.
Example output, before:
$ sudo pacman -R eclipse
checking dependencies...
Targets (1):
Name Old Version New Version Net Change
eclipse 3.7-1 -194.02 MiB
Total Removed Size: 194.02 MiB
And after:
$ sudo pacman -R eclipse
checking dependencies...
Targets (1):
Name Old Version Net Change
eclipse 3.7-1 -194.02 MiB
Total Removed Size: 194.02 MiB
Signed-off-by: Dan McGee <dan@archlinux.org>
This only applies to the VerbosePkgLists option. Lessens the
deficiencies created by earlier work to separate download records by
repository.
Satisfies FS#26334.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Break out the logic of finding payloads into a separate static function
to avoid nesting mayhem. After gathering all the records, download them
all at once.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
These can either be replaced with pm_printf() if they are error related,
or in the fprintf(stdout, ...) case a bare printf() will do.
Signed-off-by: Dan McGee <dan@archlinux.org>
Now that pm_printf() always prints to stderr, we don't need this second
function that was always used with stderr as the first argument. Thus,
this patch removes the function and makes the following sed replacement:
sed -i -e 's#pm_fprintf(stderr, #pm_printf(#g' src/pacman/*.c
Signed-off-by: Dan McGee <dan@archlinux.org>
This matches what we now do in our backend callback function- all
debug/info/warning/error/etc. messages should be on stderr. These are
all the messages with a "warning:" or other type prefix, so does not
affect general pacman output.
This should fix the output confusion noted in FS#26555.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is not something that should be used on a frequent basis, and
giving it a short option encourages use without making the drawbacks
obvious. For the 1% of situations that require it, the 5 extra
keystrokes are a fair price to pay.
Signed-off-by: Dan McGee <dan@archlinux.org>
This replaces several printf calls of the following styles:
printf("%s", ...);
printf("some fixed string");
printf("x");
We can use either fputs() or putchar() here to do the same thing
without incurring the overhead of the printf format parser.
The biggest gain here comes when we are calling the print function in a
loop repeatedly; notably when printing local package files.
$ /usr/bin/time ./pacman-before -Ql | md5sum
0.25user 0.04system 0:00.30elapsed 98%CPU
$ /usr/bin/time ./pacman-after -Ql | md5sum
0.17user 0.06system 0:00.25elapsed 94%CPU
$ /usr/bin/time ./pacman-before -Qlq | md5sum
0.20user 0.05system 0:00.26elapsed 98%CPU
$ /usr/bin/time ./pacman-after -Qlq | md5sum
0.15user 0.05system 0:00.23elapsed 93%CPU
So '-Ql' shows a 17% improvement while '-Qlq' shows a 13% improvement on
382456 total files.
Signed-off-by: Dan McGee <dan@archlinux.org>
This one is pretty darn useless. Just derefence the ->data attribute
since the type is public anyway and save yourself the function call.
Signed-off-by: Dan McGee <dan@archlinux.org>
This had the unfortunate implementation detail that depended on the
strings having 1 byte == 1 column hold true. As we know, this is not at
all the case once you move past the base ASCII character set.
Reimplement this whole thing so it doesn't depend on format strings at
all. Instead, simply calculate the max column widths, and then when
displaying each row add the correct amount of padding using UTF-8 safe
string length functions.
Before:
名字 旧版本新版本 净变化 下载大小
libgee 0.6.2.1-1 0.60 MiB 0.10 MiB
libsocialweb 0.25.19-2 1.92 MiB 0.23 MiB
folks 0.6.3.2-1 1.38 MiB 0.25 MiB
After:
名字 旧版本 新版本 净变化 下载大小
libgee 0.6.2.1-1 0.60 MiB 0.10 MiB
libsocialweb 0.25.19-2 1.92 MiB 0.23 MiB
folks 0.6.3.2-1 1.38 MiB 0.25 MiB
Signed-off-by: Dan McGee <dan@archlinux.org>
This will always be a 64-bit signed integer rather than the variable length
time_t type. Dates beyond 2038 should be fully supported in the library; the
frontend still lags behind because 32-bit platforms provide no localtime64()
or equivalent function to convert from an epoch value to a broken down time
structure.
Signed-off-by: Dan McGee <dan@archlinux.org>
We have a few incomplete translations, but these should be addressable
before the 4.0.1 maint release that is surely not that far in the
future.
Signed-off-by: Dan McGee <dan@archlinux.org>
Our error message used to be very unclear when the configuration file
could not be found:
$ ./pactree -lsr gtk
error: failed to register sync DBs
Instead, display an accurate message and include the file name:
$ ./pactree -lsr gtk
error: config file /usr/local/etc/pacman.conf could not be read
Also, move the error message inside register_syncs() to allow for
differentiating between different errors that might require a handler in
the future.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows for specifying an alternate configuration file path, similar
to pacman's "--config" option.
Given that there is currently no other way to tell pactree to read from
another configuration file (except for patching or symlinking), this
seems totally sensible - even if there are plans to refactor and/or
replace the standalone configuration file parser.
We do not define a short option for the sake of consistency with
pacman's set of command line options.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
Printing all of "Installed", "Removed" and "Net Upgrade" sizes is
redundant as the difference of the first two is the last. Instead,
only print "Installed Size" and "Net Upgrade Size" when both the
installed and removed are non-zero.
This results in the following output in the following cases:
- package installation only: Installed Size
- package removal only: Removed Size
- package installation involving replacement: Installed + Net Upgrade Size
- package upgrade: Installed + Net Upgrade Size
- combination upgrade and installation: Installed + Net Upgrade Size
Download Size remains outputted whenever something is downloaded.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Printing "[removal]" beside all package names is redundant when all
packages are being removed (i.e. when using -R).
Signed-off-by: Allan McRae <allan@archlinux.org>
This also fixes a memory leak and makes the dual-purpose "rows" variable
go away in favor of storing the rows and non-verbose names separately.
This also fixes some potential memory leaks and/or wrong behavior due to
the config->verbosepkglists flag being flipped, which we should never be
doing.
Signed-off-by: Dan McGee <dan@archlinux.org>
The prompt can be rather confusing otherwise when all files have already
been downloaded, but there is not a single total size listed.
Signed-off-by: Dan McGee <dan@archlinux.org>
Better scoping of variables for the most part, and ensure we are using
string_length() and not strlen() as appropriate. Also refactor the
longest cell code to call string_length() a lot less; by simply using an
array of max sizes we don't have to recompute values nearly as much.
Signed-off-by: Dan McGee <dan@archlinux.org>
For getcols(), the functions we call return a value of type 'unsigned
short', so it makes sense for us to do the same.
string_length() is meant to behave like strlen(), so it should return
type size_t. This exposes other functions such as indentprint() which
should also be using signed return types.
Signed-off-by: Dan McGee <dan@archlinux.org>
We now label the old 'Size' column as 'Net Change' to reflect the
reality of what we are looking at. Sync operations now get an additional
'Download Size' column.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to sort the output list by showing all pulled
dependencies first, followed by the explicitly specified targets.
Signed-off-by: Dan McGee <dan@archlinux.org>
* All errors now go to stderr, so do the same here and simplify the
writing of the error message.
* Add SIGHUP to the handled signal list, and don't repeat code.
* Attempt to release the transaction (e.g. remove the lock file)
for all of HUP, INT, and TERM. Signals HUP and INT respects
transaction state, TERM will immediately terminate the process.
Signed-off-by: Dan McGee <dan@archlinux.org>
Because we aren't using gpgv and a dedicated keyring that is known to be
all safe, we should honor this flag being set on a given key in the
keyring to know to not honor it. This prevents a key from being
reimported that a user does not want to be used- instead of deleting,
one should mark it as disabled.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is for eventual use by the PGP key import code. Breaking this into
a separate commit now makes the following patches a bit easier to
understand.
Signed-off-by: Dan McGee <dan@archlinux.org>
pm_asprintf() does not return a length as asprintf() does. Fail. Make
sure it is not -1 as that is the only failure condition.
Signed-off-by: Dan McGee <dan@archlinux.org>
This takes the libraries hidden default out of the equation: hidden in
the sense that we can't even find out what it is until we create a
handle. This is a chicken-and-egg problem where we have probably already
parsed the config, so it is hard to get the bitmask value right.
Move it to the frontend so the caller can do whatever the heck they
want. This also exposes a shortcoming where the frontend doesn't know if
the library even supports signatures, so we should probably add a
alpm_capabilities() method which exposes things like HAS_DOWNLOADER,
HAS_SIGNATURES, etc.
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm_list_count() returns size_t, which we should use to store the
result since it is easy enough to format for printing.
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds a some new callback event and progress codes for package
loading, which was formerly bundled in with package validation before.
The main sync.c loop where loading occurred is now two loops running
sequentially. The behavior should not change with this patch outside of
progress and event display; more changes will come in following patches.
Signed-off-by: Dan McGee <dan@archlinux.org>
Do this outside the loop to prevent the message from being displayed
(and pluralized!) for each individual package.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
None of these are hot-code paths, and at least the target reading has
little need for an arbitrary length limitation (however crazy it might
be to have longer arguments).
Signed-off-by: Dan McGee <dan@archlinux.org>
There is no need to print them into buffers; we can use the values
returned by gettext() directly without issue.
Signed-off-by: Dan McGee <dan@archlinux.org>
Display now looks like this, whereas before we would have just showed
'2M/s' for the extra repository download. The cutoff is placed at 100.0
to ensure we only use 4 character slots of width (e.g. '99.9', '100').
:: Synchronizing package databases...
testing 39.9 KiB 470K/s 00:00 [######################] 100%
core 51.4 KiB 469K/s 00:00 [######################] 100%
extra 768.8 KiB 2.1M/s 00:00 [######################] 100%
community-testing 1941.0 B 54.4M/s 00:00 [######################] 100%
multilib 26.6 KiB 458K/s 00:00 [######################] 100%
community 449.8 KiB 1649K/s 00:00 [######################] 100%
Signed-off-by: Dan McGee <dan@archlinux.org>
This will be the first thing printed when doing an upgrade. Currently
there is no output at all until we start resolving dependencies, which
can be a while in if specifying very large targets on the command line,
in which case it is nice to let the user know we are doing something.
Addresses FS#25822 in the most KISS way possible.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't need to keep track of how many files are in a package now that
said value is provided to us. It also makes more sense to use size_t
here for types rather than the (hopefully never too short) int.
Signed-off-by: Dan McGee <dan@archlinux.org>
Put all the callback stuff in alpm.h in one spot, and make the following
renames for clarity with the new structure:
ALPM_TRANS_EVT_* --> ALPM_EVENT_*
ALPM_TRANS_CONV_* --> ALPM_QUESTION_*
ALPM_TRANS_PROGRESS_* --> ALPM_PROGRESS_*
alpm_option_get_convcb() --> alpm_option_get_questioncb()
alpm_option_set_convcb() --> alpm_option_set_questioncb()
Signed-off-by: Dan McGee <dan@archlinux.org>
This was just disgusting before, unnecessary to limit these to only
usage in a transaction. Still a lot of more room for cleanup but we'll
start by attaching them to the handle rather than the transaction we may
or may not even want to use these callbacks.
Signed-off-by: Dan McGee <dan@archlinux.org>
Call strlen earlier in the dl progress callback, and reuse this length
to replace some heavier str*() calls with more optimized mem*()
replacements. This also gets rid of a false assumption that the ending
string will ever be longer than the original string.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When the database is locked, sync operations involving transactions, such as
pacman -Syy, show the following:
:: Synchronizing package databases...
error: failed to update core (unable to lock database)
error: failed to update extra (unable to lock database)
error: failed to update community (unable to lock database)
error: failed to update multilib (unable to lock database)
error: failed to synchronize any databases
Whereas pacman -U <pkg> shows:
error: failed to init transaction (unable to lock database)
if you're sure a package manager is not already
running, you can remove /var/lib/pacman/db.lck
Which is much more meaningful, since the presence of db.lck may indicate an
erroneous lockfile instead of an ongoing transaction.
Improve the error messages for sync operations by advising the user to remove
db.lck if he is sure that no package manager is running.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We only updated if the percentage incremented and enough time had
elapsed, even though the numerator of the current/howmany fraction may
have changed. Ensure we proceed with the progress bar update in these
cases so as to not mislead the user.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add new alpm_pkg_get_origin() method, use it in the front end now that
the enum constants are publicly available.
Signed-off-by: Dan McGee <dan@archlinux.org>
libalpm now exports type alpm_pkgfrom_t in alpm.h, which may be used
by frontends.
Pacman now uses alpm_pkgfrom_t instead of replicating that type (pkg_from
as was in src/pacman/package.h)
Updated API change in README.
Signed-off-by: Diogo Sousa <diogogsousa@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
There are many other ways to fail a package load other than "file not
found". We should also use the correct error code in this case. Clean it
up a bit in the various callers.
Signed-off-by: Dan McGee <dan@archlinux.org>
I was trying to take a shortcut and not introduce a wrapper struct for
the signature results, so packed it all into alpm_sigresult_t in the
first iteration. However, this is painful when one wants to add new
fields or only return information regarding a single signature.
Refactor the type into a few components which are exposed to the end
user, and will allow a lot more future flexibility. This also exposes
more information regarding the key to the frontend than was previously
available.
The "private" void *data pointer is used by the library to store the
actual key object returned by gpgme; it is typed this way so the
frontend has no expectations of what is there, and so we don't have any
hard gpgme requirement in our public API.
Signed-off-by: Dan McGee <dan@archlinux.org>
config_set_arch() already calls strdup(). Remove strdup() from the
config_set_arch() invocation to avoid a memory leak.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
We had two issues here. One is a file with an absolute path passed to -S
results in a cryptic error message due to the database name being '\0'.
The second is not realizing you should be doing -U instead of -S. Fix
both of these to transform this:
$ sudo pacman -S /tmp/binutils-2.21.1-2-i686.pkg.tar.xz
error: database not found:
to this:
$ sudo pacman -S /tmp/binutils-2.21.1-2-i686.pkg.tar.xz
error: target not found: /tmp/binutils-2.21.1-2-i686.pkg.tar.xz
warning: '/tmp/binutils-2.21.1-2-i686.pkg.tar.xz' is a file, did you mean -U/--upgrade instead of -S/--sync?
Signed-off-by: Dan McGee <dan@archlinux.org>
There were many cases where the string coming in was a blank line, e.g.
"\n\0", length 1. The trim routine starts by trimming leading spaces,
thus trimming everything. We would then proceed to do a memmove of the
NULL byte, which is completely worthless as we can just assign it
instead.
Signed-off-by: Dan McGee <dan@archlinux.org>
We only used short labels in one place, and the short label is always
the first character of the long label anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
This cleans up some of the mess we have here.
* switch to long units for the download size
* omit the .0 decimal part from the download rate
* omit the almost always zero HH: from estimated time if eta_h == 0
* Display --:-- if eta_h > 99; formatting was screwed up before
The net result of this is we usually have 1 more character to use for
filename display.
Before:
extra 500.9K 1242.4K/s 00:00:00 [######################] 100%
community-testing 947.0B 28.2M/s 00:00:00 [######################] 100%
multilib 26.5K 405.1K/s 00:00:00 [######################] 100%
community 450.6K 1238.3K/s 00:00:00 [######################] 100%
After:
extra 500.9 KiB 1118K/s 00:00 [######################] 100%
community-testing 947.0 B 23M/s 00:00 [######################] 100%
multilib 26.5 KiB 255K/s 00:00 [######################] 100%
community 450.6 KiB 1211K/s 00:00 [######################] 100%
Signed-off-by: Dan McGee <dan@archlinux.org>
Because why the hell not? Exbibyte, zebibyte, and yobibyte are going in,
even though nothing bigger than the 2^60 exbibyte can be represented
using an off_t variable anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
This ensures we grab and use the library default once we have processed
the global SigLevel setting, but before processing the repo-specific
settings. This means the following two configs will now evaluate the
same, as the backend currently defaults to 'Optional':
Config 1:
[options]
# nothing here
[repo]
SigLevel = TrustAll
Config 2:
[options]
SigLevel = Optional
[repo]
SigLevel = TrustAll
Signed-off-by: Dan McGee <dan@archlinux.org>
This is measuring strings that are potentially localized, so we need a
multibyte aware function to count characters instead of bytes.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We used fprintf() elsewhere in this function, but we didn't use it on
the debug timestamp printing. Use fprintf() instead of printf() to fix
this.
Signed-off-by: Dan McGee <dan@archlinux.org>
Pointer sizes are the same but this makes intention clearer.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We did this with depends way back in commit c244cfecf6 in 2007. We
can do it with these fields as well.
Of note is the inclusion of provides even though only '=' is supported-
we'll parse other things, but no guarantees are given as to behavior,
which is more or less similar to before since we only looked for the
equals sign.
Also of note is the non-inclusion of optdepends; this will likely be
resolved down the road.
The biggest benefactors of this change will be the resolving code that
formerly had to parse and reparse several of these fields; it only
happens once now at load time. This does lead to the disadvantage that
we will now always be parsing this information up front even if we never
need it in the split form, but as these are uncommon fields and our
parser is quite efficient it shouldn't be a big concern.
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds a field in the package struct for this checksum type as well
as allowing access via the API to it. The frontend is now able to
display any read value. Note that this does not implement any use or
verification of the value internally.
Signed-off-by: Dan McGee <dan@archlinux.org>
adds a new API method: alpm_pkg_get_base64_sig
[Dan: don't use a new header string in frontend]
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We were using i as the loop variable in both the inner and outer loop.
Use j in the inner loop instead for clarity.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is somewhat of a dangerous option with limited use cases. Don't
advertise it as an easily accessibly option.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Trivial to implement as the same backend machinery is used anyway.
Document it and add it to the accepted options.
Signed-off-by: Dan McGee <dan@archlinux.org>
This closely matches what we had before for -R --recursive. Basically,
when specifying a target (e.g., pacman), we can now recursively pull all
dependencies, regardless of version specifiers and whether they are
already satisfied in the local database. This could be used to update
pacman on a system with an old glibc, for example, as both pacman and
glibc would get pulled into the transaction.
This is most useful with --needed to prevent needless reinstalls as
described in the man page changes.
The end goal of this change is to wire it into SyncFirst and have it be
the default mode of operation there, but that belongs in a separate
changeset.
Signed-off-by: Dan McGee <dan@archlinux.org>
This also pulls in some early translations we had entered in Transifex
in the last day so those would not be lost. The diffstat is huge and not
very telling as usual, as all sorts of fuzzyness switches happened this
time around for some reason.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a bit of a mess, due to the fact that we have a progress meter
running. It is also ironic that we are in the midst of a method named
"commit" when we haven't done a damn thing yet, and can still fail hard
if either a checksum or signature is invalid or unrecognized.
Adapt the former test_md5sum method to be invoked for any of the various
failure types, which at least gives the user some indication of what
packages are failing. A second patch will be needed to actually show
worthwhile error codes, but this is going to involve modifying the
actual data passed with the callback.
Signed-off-by: Dan McGee <dan@archlinux.org>
If someone did a 'touch bogusrepo.db', we had the potential to throw a
SIGFPE or divide by zero, given that the total file size was 0 and
getting passed up to the pacman callback. Fix this so we get weird but
sane output and don't blow up when downloading:
:: Synchronizing package databases...
core 35.7K 306.7K/s 00:00:00 [###################] 100%
bogusrepo 0.0K 0.0K/s 00:00:00 [###################] 100%
Exception as seen in gdb:
Program received signal SIGFPE, Arithmetic exception.
0x000000000040cc73 in cb_dl_progress (filename=0x619dfc "bogusrepo.db", file_xfered=0, file_total=0) at callback.c:584
584 file_percent = (file_xfered * 100) / file_total;
Signed-off-by: Dan McGee <dan@archlinux.org>
This moves us toward staring translations for the 4.0.0 release,
although this should not be interpreted as a string freeze by any means.
Signed-off-by: Dan McGee <dan@archlinux.org>
These are never modified and even getopt_long's prototype shows this
modifier on the parameter.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
pacsort is a command line sorting utility that implements libalpm's
alpm_pkg_vercmp algorithm.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We did a good job checking this in add.c, but not necessarily anywhere
else. Fix this up by adding checks into dload.c, remove.c, and conf.c in
the frontend. Also add loggers where appropriate and make the message
syntax more consistent.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add code to conf.c that parses the new SigLevel directive. An
overwhelming number of options are presented, but most users will still
be fine with the Never/Optional/Required trio. More advanced users can
combine these or any of the other options on a 'SigLevel = ' line, which
is parsed in a left-to-right fashion and flags turned on and off
accordingly. For example, all three of these will net the same config:
SigLevel = Required PackageOptional
SigLevel = Optional DatabaseRequired
SigLevel = DatabaseRequired PackageOptional
Additionally, database-specific lines assume you wish to start with any
global default that has been set. For example, if any of the above lines
were in the [options] section, something such as:
SigLevel = PackageRequired PackageAllowMarginal
Would continue to enforce required database signatures.
Inspiration-by: Kerrick Staley <mail@kerrickstaley.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This ensures we are actually making correct use of the information gpgme
is returning to us. Marginal being allowed was obvious before, but
Unknown should deal with trust level, and not the presence or lack
thereof of a public key to validate the signature with.
Return status and validity information in two separate values so check
methods and the frontend can use them independently. For now, we treat
expired keys as valid, while expired signatures are invalid.
Signed-off-by: Dan McGee <dan@archlinux.org>
Pacman did a great job of having almost (but not quite) duplicate code
paths through the sync and upgrade code. We can use the same logic in
both upgrade in sync once the targets are resolved, so extract a
function and delete a bunch of code.
Signed-off-by: Dan McGee <dan@archlinux.org>
Hardcoding anything always ends up burning you, and the arbitrary length
of 64 here did just that. Add the ability to reallocate the readline
buffer for longer inputs if necessary, and add other error checking as
approprate. This also plugs one small memory leak of the group
processing code selection array.
Addresses FS#24253.
Signed-off-by: Dan McGee <dan@archlinux.org>
This accomplishes quite a few things with one rather invasive change.
1. Iteration is much more performant, due to a reduction in pointer
chasing and linear item access.
2. Data structures are smaller- we no longer have the overhead of the
linked list as the file struts are now laid out consecutively in
memory.
3. Memory allocation has been massively reworked. Before, we would
allocate three different pieces of memory per file item- the list
struct, the file struct, and the copied filename. What this resulted
in was massive fragmentation of memory when loading filelists since
the memory allocator had to leave holes all over the place. The new
situation here now removes the need for any list item allocation;
allocates the file structs in contiguous memory (and reallocs as
necessary), leaving only the strings as individually allocated. Tests
using valgrind (massif) show some pretty significant memory
reductions on the worst case `pacman -Ql > /dev/null` (366387 files
on my machine):
Before:
Peak heap: 54,416,024 B
Useful heap: 36,840,692 B
Extra heap: 17,575,332 B
After:
Peak heap: 38,004,352 B
Useful heap: 28,101,347 B
Extra heap: 9,903,005 B
Several small helper methods have been introduced, including a list to
array conversion helper as well as a filelist merge sort that works
directly on arrays.
Signed-off-by: Dan McGee <dan@archlinux.org>
This can only ever operate on the local database, and a local package at
that. Change the function signature to take a handle and package object,
add the relevant asserts, and ensure the frontend can detect the package
not found condition when finding packages to pass to this method.
Signed-off-by: Dan McGee <dan@archlinux.org>
We did some funny stuff here before to allow specifying fully-qualified
package names, such as 'testing/gcc' or 'core/gcc'. However, it was done
by duplicating code, not to mention an early escape if a repository
could not be found for an early target. Something like `pacman -Si
foo/bar core/gcc' would not give expected results, although `pacman -Si
bar gcc' would.
Clean up the code, remove strncpy() usage, and clarify the error
messages a bit.
Signed-off-by: Dan McGee <dan@archlinux.org>
The supposed safety blanket of this function is better handled by
explicit length checking and usages of strlen() on known NULL-terminated
strings rather than hoping things fit in a buffer. We also have no need
to fully fill a PATH_MAX length variable with NULLs every time as long
as a single terminating byte is there. Remove usages of it by using
strcpy() or memcpy() as appropriate, after doing length checks via
strlen().
Signed-off-by: Dan McGee <dan@archlinux.org>
The only thing this accessor did was remove the const qualifier
given our entire list implementation requires passing around the
head anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
They are placeholders, but important for things like trying to re-sync a
database missing a signature. By using the alpm_db_validity() method at
the right time, a client can take the appropriate action with these
invalid databases as necessary.
In pacman's case, we disallow just about anything that involves looking
at a sync database outside of an '-Sy' operation (although we do check
the validity immediately after). A few operations are still permitted-
'-Q' ops that don't touch sync databases as well as '-R'.
Signed-off-by: Dan McGee <dan@archlinux.org>
Show output in -Qip for each package signature, which includes the UID
string from the key ("Joe User <joe@example.com>") and the validity of
said key. Example output:
Signatures : Valid signature from "Dan McGee <dpmcgee@gmail.com>"
Unknown signature from "<Key Unknown>"
Invalid signature from "Dan McGee <dpmcgee@gmail.com>"
Also add a backend alpm_sigresult_cleanup() function since memory
allocation took place on this object, and we need some way of freeing
it.
Signed-off-by: Dan McGee <dan@archlinux.org>
This gives us more granularity than the former Never/Optional/Always
trifecta. The frontend still uses these values temporarily but that will
be changed in a future patch.
* Use 'siglevel' consistenly in method names, 'level' as variable name
* The level becomes an enum bitmask value for flexibility
* Signature check methods now return a array of status codes rather than
a simple integer success/failure value. This allows callers to
determine whether things such as an unknown signature are valid.
* Specific signature error codes mostly disappear in favor of the above
returned status code; pm_errno is now set only to PKG_INVALID_SIG or
DB_INVALID_SIG as appropriate.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to capture size and mode data when building filelists
from package files. Future patches will take advantage of this newly
available information, and frontends can use it as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a convention that is widely followed in *nix and posix-ish
environments. We should follow it, too.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Some of these are legit (the backup hash NULL checks), while others are
either extemely unlikely or just impossible for the static code
analysis to prove, but are worth adding anyway because they have little
overhead.
Signed-off-by: Dan McGee <dan@archlinux.org>
Using grp instead of group is a small saving at the cost of clarity.
Rename the following functions:
alpm_option_get_ignoregrps -> alpm_option_get_ignoregroups
alpm_option_add_ignoregrp -> alpm_option_add_ignoregroup
alpm_option_set_ignoregrps -> alpm_option_set_ignoregroups
alpm_option_remove_ignoregrp -> alpm_option_remove_ignoregroup
alpm_db_readgrp -> alpm_db_readgroup
alpm_db_get_grpcache -> alpm_db_get_groupcache
alpm_find_grp_pkgs -> alpm_find_group_pkgs
Signed-off-by: Allan McRae <allan@archlinux.org>
Only one of these looked like a real red flag, in find_requiredby(), but
it doesn't hurt to fix several of them up anyway.
Unfortunately, we can't turn this on universally due to things like the
sync(), remove(), etc. builtins which we often use as variable names.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a whole lot of bloat to parse pacman.conf and only a few lines to
use the list of sync DBs instead of the local DB.
Dan: I fully plan on this being temporary and us finding a better way in
the future to parse pacman.conf from multiple binaries. Adding a
standalone config parser is probably not the right way of going about
things, but for now it is by far the easiest.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Declare an alpm_list which, for now, only holds our local database.
walk_deps and walk_reverse_deps are refactored to account for this, and
a helper function is added to wrap alpm_db_get_pkg for traversing a
list.
This is groundwork for letting pactree walk the sync DBs.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Start by converting all of our flags to a 'status' bitmask (pkgcache
status, grpcache status). Add a new 'valid' flag as well. This will let
us keep track if the database itself has been marked valid in whatever
fashion.
For local databases at the moment we ensure there are no depends files;
for sync databases we ensure the PGP signature is valid if
required/requested. The loading of the pkgcache is prohibited if the
database is invalid.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is another step toward doing both local database validation
(ensuring we don't have depends files) and sync database validation (via
signatures if present) when the database is registered.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the ideal place to do it as all clients should be checking the
return value and ensuring there are no errors. This is similar to
pkg_load().
We also add an additional step of validation after we download a new
database; a subsequent '-y' operation can potentially invalidate the
original check at registration time.
Note that this implementation is still a bit naive; if a signature is
invalid it is currently impossible to refresh and re-download the file
without manually deleting it first. Similarly, if one downloads a
database and the check fails, the database object is still there and can
be used. These shortcomings will be addressed in a future commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
For the files count when loading from a package, we can keep a counter.
The two in the frontend were completely useless due to the fact that if
sync_dbs is non-NULL, alpm_list_count() will always be greater than 0.
Signed-off-by: Dan McGee <dan@archlinux.org>
Now that we have performed the split, prune the catalogs of all
scripts-only messages.
All old messages were pruned from the files using the following command:
sed -i -e '/^#\~/,$d' *.po
Note: the diff on this commit looks much less insane if the --patience
option is used.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the first step at separating the pacman message catalog and the
scripts message catalog. Makefiles, configure.ac, and other such files
are adjusted accordingly, as well as renaming files. The TEXTDOMAIN of
scripts is also adjusted.
Note that no actual pot or po files get changed here; these will get
pruned in a future commit so each catalog contains only the necessary
messages.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to separate the name and hash elements in one place and
not scatter different parsing code all over the place, including both
the frontend and backend.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add detection for stdout being attached to a tty device. When this check
fails, return a default width of 0, which callers interpret to mean
"don't wrap". Conversely, when our term ioctl suceeds but returns 0, we
interpret this to mean a tty with an unknown width (e.g., a serial
console), in which case we default to a sane value of 80.
Signed-off-by: Dave Reisner <d@falconindy.com>
This removes the need to write accessor methods for every type we have,
and simplifies the API. Any type that doesn't need magic* can be
converted in this fashion to make it easier for frontend applications to
use, as well as make it less of a pain to introduce new such structs in
the future.
* "magic" meaning something like pmpkg_t where values can be lazy loaded.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is more in line with reality and what we have our makepkg, etc.
options named anyway.
Original-patch-by: Kerrick Staley <mail@kerrickstaley.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This method is old, it doesn't adequately check for a NULL server list,
and can easily be done using better API method we provide these days.
All former users of this method can get similar results by calling
alpm_db_get_servers() and using the data from the returned server list.
Signed-off-by: Dan McGee <dan@archlinux.org>
We now parse an entire repo section and store all information about it.
When the next section is encountered or the end of the root config file
is reached, we will then process the stored information.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Function doxygen documentation
* Reuse a single strlen() call
* Prevent infinite recursion (limit to 10 levels)
* Other small cleanups
Signed-off-by: Dan McGee <dan@archlinux.org>
Even though we currently don't use it here in the backend, we might as
well pass it in since we used it earlier.
Signed-off-by: Dan McGee <dan@archlinux.org>
This makes these functions consistent with the rest of the transaction
related API calls. We do an additional assert to ensure the handle
attached to the package is the same as the handle passed in.
Signed-off-by: Dan McGee <dan@archlinux.org>
A few of these snuck in as of late, some from the table display patches
that were using the previous format before we changed it after the 3.5.X
major release.
Noticed-by: Kerrick Staley <mail@kerrickstaley.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
commit c1f742d775 broke what was one of the tenants of out output-
if piping pacman output somewhere else, we shouldn't ever try to
line-wrap and indent print our output. This makes it easier for tools to
use output from pacman -Ss, -Qs, -Qi, etc. list_display() unfortunately
was given a default value of 80 rather than 0, so fix this.
Next, make some additional changes that ensure we don't insert an
unnecessary blank line if for some crazy reason the indent level (such
as on -Qi output) is greater than the number of columns. Accomplish this
by printing the first item unconditionally as we do in
list_display_linebreak().
Finally, teach indentprint to not wrap if the number of columns is less
than the indent level, this prevents some forms of ridiculous output
such as the following:
Install Date : Wed
08
Jun
2011
04:39:19
AM
CDT
Signed-off-by: Dan McGee <dan@archlinux.org>
Begin enforcing the need to pass a handle. This allows us to remove one
more extern handle declaration from the backend.
Signed-off-by: Dan McGee <dan@archlinux.org>
This requires a lot of line changes, but not many functional changes as
more often than not our handle variable is already available in some
fashion.
Signed-off-by: Dan McGee <dan@archlinux.org>
The few remaining instances were utilized for buffers in calls to
snprintf() and realpath(). Both of these functions will always ensure
the returned value is padded with '\0', so there is no need for the
extra byte.
Signed-off-by: Dan McGee <dan@archlinux.org>
When only downloading a package that is in IgnorePkg, pacman
incorrectly asks about installing.
e.g. with <pkg> in IgnorePkg in pacman.conf:
> pacman -Sddw <pkg>
:: <pkg> is in IgnorePkg/IgnoreGroup. Install anyway? [Y/n]
This output is now silenced when downloading only.
Signed-off-by: Allan McRae <allan@archlinux.org>
Dan McGee