I imported this translation from transifex without realising that there
was no strings translated despite being "acitve" on transifex for quite
some time. Remove it until translation begins...
Signed-off-by: Allan McRae <allan@archlinux.org>
We should save the current locale, use the 'C' locale during parsing,
then restore the original locale. Config files should always parse
regardless of the current user's locale setting. Fixes FS#34253.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Quoting output substitutions makes whitespace errors such as FS#30101
much more obvious:
old:
missing perl-test-pod dependency for perl-test-output
new:
missing 'perl-test-pod ' dependency for 'perl-test-output'
Several of the quoted substitutions should not be capable of containing
whitespace in theory, but this errs on the side of caution as the point
of the tool is to find error conditions.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Passing the local package list to alpm_checkdeps as both the local
packages and packages to be upgraded did nothing but cause extra
overhead as the packages were all removed from the installed package
list because they were being upgraded.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently pacman either prints 'adding' or 'upgrading' when installing
a package. This make pacman print and log the other possible actions:
'downgrade' and 'reinstall'
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
colstr_t colstr will hold the colourizing agents.
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Colours can be enabled in two ways:
- Add Color to pacman.conf. This enables colours automatically.
- Use --color=WHEN where WHEN is none/auto/always.
WHEN as 'never' disables colours (overrides config file), as 'auto'
enables colours when stdout is a tty, and 'always' enables colours no
matter what.
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Remove the format component of the "Total Download Size" and related
messages. The heading will be colourized, the size won't.
However since the length of these messages can vary by language, we need
a pretty printer to format them nicely.
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Basically all translation messages that need colouring but _also_ happen
to be format strings need to be split up.
This makes it easy to conditionally embed colour codes into the output
at runtime.
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This will substantially simplify the logic to add colours to messages.
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Pacman currently bails when trying to extract a file over a directory
when using --force. Instead of ignoring all conflict, perform the
check and skip any file-file conflicts. Conflicts between directories
and files are still flagged and cause the transation to abort.
As a bonus, we now know about files changing packages when using
--force, so we can skip removing them fixing upgrade046.
Signed-off-by: Allan McRae <allan@archlinux.org>
Fixes all clang warnings with -Wformat-literal.
Also, fix genuine formating issue discovered once adding these attributes
and add a cast to prevent a gcc warning.
Signed-off-by: Allan McRae <allan@archlinux.org>
Keys used to create signatures are checked for presence in the keyring
before package validation is performed.
Signed-off-by: Allan McRae <allan@archlinux.org>
Conflicts:
lib/libalpm/alpm.h
Signed-off-by: Allan McRae <allan@archlinux.org>
This prevents multiple spaces between values from being
parsed as empty values.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Add LocalFileSigLevel and RemoteFileSigLevel to control the signature
checking for "pacman -U <file>" and "pacman -U <url>" operations
respectively. The starting value for both these options is SigLevel,
if it is specified in the [options] section, or the built-in system
default. The specified values override and/or supplement this initial
value. Note there is no distinction between setting "Required" and
"PackageRequired" as there are no database options for Upgrade
operations.
Signed-off-by: Allan McRae <allan@archlinux.org>
We still call some of these 'deprecated' methods elsewhere, so this
shouldn't present a problem. When we decide 2.x support is to be dropped,
we should update all of the code to not call deprecated methods.
Allan: Adjusted with respect to previous patches adding libarchive
compatibilty layer.
Signed-off-by: Allan McRae <allan@archlinux.org>
Also fix a small bug where pacman won't check if the sync dbs are first
downloaded when invoked with --native (it should).
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
prefix defaults to "UNKOWN" if null or an empty string is provided.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Teach pacsort to understand package filenames and optionally strip away
some of the context. alpm_pkg_vercmp() intentionally only understands
pure versions, so strings such as '18.0-2-x86_64' and '18.0.1-1-x86_64'
will be compared wrongly.
Partially addresses FS#33455.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
The restriction of not checking the ownership of a directory is
unnecessary given that all the package filelists contain this
information. Remove this restriction, with the expectation that you
might get multiple packages returned for a given directory.
Additionally attempt to minimise the number of files getting through
to the slow realpath call.
Original-work-by: Dan McGee <dan@archlinux.org>
Original-work-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
There is duplicated code in the util.c files in the libalpm and pacman
source code. Split this into a separate file so that it can be shared
via a symlink. This prevents code divergence between the two code bases.
Also, move mbasename and mdirname from pacman/util.c into util-common.c
in preparation for the following patch that uses them to add an extension
to pacsave files.
Signed-off-by: Allan McRae <allan@archlinux.org>
If we are reversed, then we were correctly freeing both the list and the
contained data. However, we were leaking a list in the case of a
non-reversed traversal.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
A properly formatted mtree file may stick a leading "./" in front
of file names in the root directory. Strip this if present.
Signed-off-by: Allan McRae <allan@archlinux.org>
Bail early in file validation checks if the file type given in the
mtree file does not match that in the filesystem.
Signed-off-by: Allan McRae <allan@archlinux.org>
The "install" and "changelog" entries for a package in the local
database are now checked for changes with -Qkk.
Signed-off-by: Allan McRae <allan@archlinux.org>
The follow fields are checked:
Directory: uid, gid, mode
File: uid, gid, mode, size, time
Symbolic Link: uid, gid, mode, link, time
A skeleton is added for checking a files md5sum and sha256sum when
reading this information is supported by libarchive.
Signed-off-by: Allan McRae <allan@archlinux.org>
If a package has an mtree file, using pacman -Qkk will read that
file and use it to perform more in depth package checking.
Currently this only checks for file presence.
Signed-off-by: Allan McRae <allan@archlinux.org>
There is going to be a lot of overlap in the code for the quick
and full checks that can be abstracted into their own functions.
Also many other file checking functions will be needed for the
full check. Put all these in a separate source file.
Signed-off-by: Allan McRae <allan@archlinux.org>
When a configured repo database is not already downloaded, a warning
message such as "warning: database file for 'testing' does not exist"
is printed. Disable this warning when the database is scheduled to
be downloaded in the transaction.
Signed-off-by: Allan McRae <allan@archlinux.org>
When a packages (new) optdepends are printed in install (update),
add a note of their current installation status. Packages currently
installed are labelled with [installed] and packages to be installed
in this transaction are labelled [pending].
Signed-off-by: Allan McRae <allan@archlinux.org>
Much like packages that require a give package are displayed in the
"Required by" field of its information output, alos display packages
that optionally require the package.
Inspired-by: Benedikt Morbach <benedikt.morbach@googlemail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
When a package is being removed, provide a notification (via a callback)
if any local package requires it as an optdepend.
Signed-off-by: Allan McRae <allan@archlinux.org>
Removing the leader for the toplevel package shifted the name left
but not it's limb.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Ensure that both output formats have equal spacing, and therefore an
equivalent layout. This change also removes the styling from the
toplevel package being searched for.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Stick to c89 and avoid mixed code and declarations, and always brace
block statements, even if they're only 1 line.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a compile time check for langinfo.h so that we can possibly use
unicode line drawing characters if the current locale is supportive of
them. This can be explicitly disabled at runtime with the use of a new
switch: -a, --ascii.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
The long --sync options has apparently never worked.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This is redundant, and any usage of -D should belong to CPPFLAGS.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Since commit d2669b47, CFLAGS specified on the command line haven't been
respected at all, resulting in no optimization being applied to builds.
This exposed one warning flag issue in some new code, which is also
fixed here.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
When the len and cidx were changed to size_t in a8a1b093, it was
possible to have an integer overflow when a line ended right at the
edge of the terminal width.
Signed-off-by: Allan McRae <allan@archlinux.org>
Returning "/" from mdirname removes it as a special case which allows us to
test it like any other directory. This corrects a false positive when querying
a file in / and root is not set to /.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Trailing '/' in paths causes lstat to dereference symlinks to
directories which causes it to break even though the symlink is a valid
target.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Resolving root early prevents later calls to realpath from having to do the
work of actually resolving any symlinks in root.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
resolve_path is a equivalent to calling realpath(path, NULL) except that the
returned string is guaranteed to be PATH_MAX long. We never append to the
returned string, so this is unnecessary.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Currently, the package description is printed at the end of the -Si output.
This is probably one of the more important pieces of information so should
be nearer the top. Also move the package architecture up.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When cleaning the cache, ask for each cachedir separately.
Allan: add some white space in output
Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Make an array out of our various glob skip patterns and loop through
them looking for items to skip. Additionally, when doing a full clean,
delete all objects rather than respect this skip list.
Signed-off-by: Dan McGee <dan@archlinux.org>
if fopen returns NULL, append the libc strerror-ized error message to
our own error message.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
I find that when copying the output of "pacman -Qs foo" into a
"pacman -Qi" operation to get more information on the packages, I
consistently copy the "local/" prefix. It is a minor usability
improvement to strip this if present.
Dan: Pluck out LOCAL_PREFIX and magic numbers.
Signed-off-by: Allan McRae <allan@archlinux.org>
Check for an exact match when querying ownership of files in the root.
Previously, our test was too simple and would match the the basename of
package files against the query parameter, e.g.
$ pacman -Qo config
/config is owned by cower-git 20120614-1
Adds a new test to verify this behavior, query007.py.
Fixes FS#30388.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We support multiple arguments being comma separated elsewhere, so this
seems like a natural extension to support in our multiparse selection
code.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Prefix the list of packages being installed/removed with "Packages"
instead of "Targets" as they are package names by this stage.
Fixes FS#23123.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
These were removed entirely by f34864cc9e, but some people (myself
included) still find them useful. Revive these details, but "demote"
them, so that they're only displayed when extra sync data is requested.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
With some contrived examples, you could easily make testdb return a very
high error count, which could easily overflow the 8-bit unsigned integer
limit. Instead, simply return 1 or 0 based on whether errors were found.
Signed-off-by: Dan McGee <dan@archlinux.org>
This has outlived its usefulness and causes more problems than it
solves. It has historically only ever been used to install pacman first.
That should not be needed given we provide the vercmp utility (which has
no library dependencies) and so calling pacman in install scripts is a
sign of poor packaging.
Work-duplicated-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes a bunch of small issues in order to enable a clean
successful build with a crazy number of GCC warning flags. A lot of
these changes are covered by -Wshadow, -Wformat-security, and
-Wstrict-overflow=5.
Signed-off-by: Dan McGee <dan@archlinux.org>
Continue the trend of not touching the environment CFLAGS, ensuring that
the user always has the final say.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Only displays groups that haven't appeared yet..
Previously 'pacman -Sg' iterated over syncs, printed every group.
This change does not affect '-Sgg' which still orders by sync first.
To reproduce, on a current Arch Linux with [extra] and [community]:
$ pacman -Sg|sort|uniq -c|sort -n
[...]
1 xorg-fonts
2 vim-plugins
2 xfce4-goodies
Signed-off-by: Pierre <pierre@spotify.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Pull updates from transifex, run update-po on all files, fix a few
errors, and push them back to Transifex.
Signed-off-by: Dan McGee <dan@archlinux.org>
This dramatically improves upon a much older attempt in 2008 in commit
ce3d70aa99. We don't need to call it once per line we print unless
there is a reasonable expectation of being able to resize the terminal
mid-operation; this is really only the case during our callback progress
bars.
Some before and after numbers of ioctl() calls, gleaned from strace of
the following operations (no targets to any of them to maximize the
amount of output):
pacman -Qii : 37768 -> 2616 (93.1% decrease)
pacman -Qs : 2616 -> 4 (99.8%)
pacman -Sii : 133036 -> 10926 (91.8%)
pacman -Ss : 10926 -> 14 (99.9%)
Obviously the search results are astounding; we only call getcols()
once in the case of -Qs, and once per repo in the case of -Ss. For
-Qii and -Sii we are still calling it once per package, but this is
much better than once per line of info output.
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently, we try to do a bunch of funkyness constraining download size
to print only when doing a -S/--sync operation. However, it is possible
we try to download packages on a -U/--upgrade operation, and we
currently won't show any itemized download sizes.
Fix this ommission by always including the download size stuff in the
built table rows; this column will be completely omitted anyway if there
are no values due to prior work in commit 33bb7dbd35.
Signed-off-by: Dan McGee <dan@archlinux.org>
We had one stubbed out so we didn't require a translation update, and
the other is more a code style issue.
Signed-off-by: Dan McGee <dan@archlinux.org>
Unify the output for local and sync packages by only printing a
list of possible validation types for sync packages. This also
has the advantage of not printing the very long sha256 checksum
which line wrapped on a standard width terminal.
Signed-off-by: Allan McRae <allan@archlinux.org>
When installing a package, store information on which validation
method was used and output this on "pacman -Qi" operations.
e.g.
Validated By : SHA256 Sum
Possible values are Unknown, None, MD5 Sum, SHA256 Sum, Signature.
Dan: just a few very minor tweaks.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
No new behaviour introduced, everything should work exactly as before.
Dan: refactored to use the single alpm_depend_t structure.
Signed-off-by: Benedikt Morbach <benedikt.morbach@googlemail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* it updates to all translations
* minor fr, pt_BR, de, lt, sk and uk updates
* add new strings in pacman translation catalog
Signed-off-by: Dan McGee <dan@archlinux.org>
Ensure we give database signatures special treatment like we already did
for package signatures. Attempt to parse the database name out of them
before taking the proper steps to handle their existence. This fixes
FS#28714.
We also add an unlink_verbose() helper method that displays any errors
that occur when unlinking, optionally opting to skip any ENOENT errors
from being fatal.
Finally, the one prompt per unknown database has been removed, this has
no real sound purpose and we don't do this for packages. Simply kill
databases we don't know about; other programs shouldn't have random data
in this directory anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add 2012 to the copyright range for all libalpm and pacman source files.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This was noted when trying to perform an operation on a pacman database
on a read-only file system. Print the actual underlying errno string,
and only show the "you can remove" message if the lock file actually
exists.
Before:
$ pacman -Su
error: failed to init transaction (unable to lock database)
if you're sure a package manager is not already
running, you can remove /e/db.lck
After:
$ pacman -Su
error: failed to init transaction (unable to lock database)
error: could not lock database: Read-only file system
Signed-off-by: Dan McGee <dan@archlinux.org>
This reverts commit f3fa77bcf1 along with
making other necessary changes to fully back this (mis)feature out until
we can do it correctly.
The quick summary here is this was not implemented correctly; provides
are not fully taken into account in this logic, and making that happen
exposes a lot of other flaws in this code that are covered up later on
in the dependency resolving process by several other pieces of
convoluted and conditional logic.
Tests have been adjusted accordingly. Some test EXISTS conditions have
been removed as we already know the package is installed locally, and we
also are checking the VERSION condition anyway.
With these two related revert commits, we do have some changes in test
pass/fail results:
* upgrade078.py: does not pass, this is due to --recursive getting
removed for -U/-S operations after this commit.
* sync302.py: the version checks have been disabled, so this test
continues to pass but has been scaled back in scope.
* sync303.py: now passes, was failing before.
* sync304.py: still failing, was failing before.
* sync305.py: now passes, was failing before.
* sync306.py: still passes, was passing before.
Signed-off-by: Dan McGee <dan@archlinux.org>
This reverts commit 0903452032.
Tests affected by this revert have been adjusted; additionally a few
EXIST tests have been removed where there is already a VERSION test
doing the job for us.
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm_trans_prepare can not return ALPM_ERR_PKG_INVALID_ARCH on a
remove operation so there is no point in checking for it.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Without setting gpgdir, testpkg outputs:
warning: Public keyring not found; have you run 'pacman-key --init'?
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This was the only variable of its kind when a define was done on the
compiler command line. Move it into config.h instead.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is after some manual massaging to fix issues with newlines in some
translations of the script catalogs.
Signed-off-by: Dan McGee <dan@archlinux.org>
This makes several small adjustments to our exposed method names, and in
one case, parameters. The justification here is to make methods less odd
in their naming convention. If a method takes an alpm_db_t argument, the
method should be named 'alpm_db_*', but perhaps more importantly, if it
doesn't take a database as the first parameter, it should not.
Summary of changes:
alpm_db_register_sync -> alpm_register_syncdb
alpm_db_unregister_all -> alpm_unregister_all_syncdbs
alpm_option_get_localdb -> aplpm_get_localdb
alpm_option_get_syncdbs -> aplpm_get_syncdbs
alpm_db_readgroup -> alpm_db_get_group
alpm_db_set_pkgreason -> alpm_pkg_set_reason
All methods keep the same argument list except for alpm_pkg_set_reason;
there we drop the 'handle' argument as it can be retrieved from the
passed in package object.
Signed-off-by: Dan McGee <dan@archlinux.org>
The pacman-scripts catalog is omitted here due to various newline errors
I don't have the time to fix right now.
Signed-off-by: Dan McGee <dan@archlinux.org>
We hardly need the complexity (or slowness) provided by the libm power
function; add a super-cheap one that suits our needs and is specialized
for the values we plan on passing in.
Signed-off-by: Dan McGee <dan@archlinux.org>
Dan: don't compute lower bound unless needed, flip argument order so
out values are last, add param Doxygen documentation.
Signed-off-by: Dan McGee <dan@archlinux.org>
Rework the frontend and backend to allow passing a ratio value in for
UseDelta rather than having a hardcoded #define-d 0.7 value always used.
This is useful for those with fast connections, who would likely benefit
from tuning this ratio to lower values; it is also useful for general
testing purposes.
The libalpm API changes for this, but we do support the old config file
format with a no-value 'UseDelta' option; in this case we simply use the
old default of 0.7.
We clamp the ratio values to a sane range between 0.0 and 2.0, allowing
ratios above 1.0 for testing purposes.
Signed-off-by: Dan McGee <dan@archlinux.org>
The entry's name is only used when not "." or ".." so only print the
string then.
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently, a transaction is considered to be purely package removal
until the first package install is found. This resulted in the
removed packages at the start of a combined upgrade/removal transaction
not getting the "[removal]" output.
Fixes FS#27981.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When asking question and stdin is piped, the response does not get printed out,
resulting in a missing \n and broken output (FS#27909); printing the response
fixes it.
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This removes the hack I added to skip '*.sig' files earlier since there
are other files that also fall into the same bucket- source packages
from `makepkg --source`, delta files, etc. Rather than prompting for
each and every one, simply skip them. Doing '-Scc' rather than '-Sc'
will delete these files if that is really what you want to do.
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds an additional check step to find files in the local database
that claim to be owned by more than one package at once, which is
definitely not a supported setup.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't need absolute floating point precision at all here; we can
stick to integer land and use milliseconds which are precise enough for
our purposes. This also removes most floating point math out of the
non-update code path.
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead of returning the same value as the parameter to this function,
return the length of the string, which can be useful to the caller when
its non-zero (e.g. to find the end of the string).
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Pacman assumes that the final character of a line specifing a repo
in pacman.conf is a "]". But it did not clean whitespace from the
line after removing any comments. So lines like:
[allanbrokeit] # could break system
caused pacman not to recognize the repo. Adjust config parsing to
strip comments before trimming whitespace from the end of the string.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Ensures that config.h is always ordered correctly (first) in the
includes. Also means that new source files get this for free without
having to remember to add it.
We opt for -imacros over -include as its more portable, and the
added constraint by -imacros doesn't bother us for config.h.
This also touches the HACKING file to remove the explicit mention of
config.h as part of the includes.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
As per HACKING file, we use 'CTRL(' rather than 'CTRL ('
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If someone specifies a bogus line such as
pacman -S baz adsf/boo base-devel
we are better off trying to process all targets and showing all relevant
errors before exiting. This is easier in -U and -R operations where we
aren't dealing with groups, but here we attempt to skip group selection
once we know a target has errored to avoid cluttering the output and
hiding the real problem.
Signed-off-by: Dan McGee <dan@archlinux.org>
If an early target fails, we stopped processing the rest of the list. We
should continue all the way through and show relevant errors for each
target if possible, and error out only at the end.
We do process all targets to check for URLs first and will error out if
some could not be processed; we then do a second loop and try to load
each target specified on the command line.
This mirrors a patch by Allan to do the same for removal operations.
Signed-off-by: Dan McGee <dan@archlinux.org>
On a removal operation, pacman currently reports an error for the
package that is not found in the database and then exists. Adjust
so that all unknown packages are reported.
Before:
> pacman -R foo bar
error: 'foo': target not found
After:
> pacman -R foo bar
error: 'foo': target not found
error: 'bar': target not found
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Add last-minute changes to NEWS
* Don't treat '_' or '_n' special in scripts when finding translatable
strings; this breaks with one use of `read` and a dummy _ variable
Signed-off-by: Dan McGee <dan@archlinux.org>
This is consistent with the other enums and structs, and should be
slightly more readable.
Signed-off-by: Jonathan Conder <jonno.conder@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Bump the version, update the translation template files, and fill in
NEWS with relevant commits and changes since 4.0.0.
Signed-off-by: Dan McGee <dan@archlinux.org>
Allan's original message: Occasionally when the download rate showed
100.0 the output got messed up. This was caused by the rounding of a
number between 99.95 and 100. Adjust the threshold to avoid this
rounding issue.
Dan: make this fix, but also show values between 0 and 9.995 with two
decimal places since we have the room.
Original-fix-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
On -R operations, the "New Version" column is always empty, taking up
space and not really showing the user anything valuable. The same is
true on -S or -U operations for the "Old Version" column when packages
are only being installed and not upgraded.
Remove this column so we get a few screen columns back, especially now
that we show repo/packagename style output. This also makes some
adjustment to the padding logic. We no longer include padding in column
widths but it is included in the total table width. We also ensure the
last displayed column is always right aligned, even if this is not the
actual rightmost column.
Example output, before:
$ sudo pacman -R eclipse
checking dependencies...
Targets (1):
Name Old Version New Version Net Change
eclipse 3.7-1 -194.02 MiB
Total Removed Size: 194.02 MiB
And after:
$ sudo pacman -R eclipse
checking dependencies...
Targets (1):
Name Old Version Net Change
eclipse 3.7-1 -194.02 MiB
Total Removed Size: 194.02 MiB
Signed-off-by: Dan McGee <dan@archlinux.org>
This only applies to the VerbosePkgLists option. Lessens the
deficiencies created by earlier work to separate download records by
repository.
Satisfies FS#26334.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Break out the logic of finding payloads into a separate static function
to avoid nesting mayhem. After gathering all the records, download them
all at once.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
These can either be replaced with pm_printf() if they are error related,
or in the fprintf(stdout, ...) case a bare printf() will do.
Signed-off-by: Dan McGee <dan@archlinux.org>
Now that pm_printf() always prints to stderr, we don't need this second
function that was always used with stderr as the first argument. Thus,
this patch removes the function and makes the following sed replacement:
sed -i -e 's#pm_fprintf(stderr, #pm_printf(#g' src/pacman/*.c
Signed-off-by: Dan McGee <dan@archlinux.org>
This matches what we now do in our backend callback function- all
debug/info/warning/error/etc. messages should be on stderr. These are
all the messages with a "warning:" or other type prefix, so does not
affect general pacman output.
This should fix the output confusion noted in FS#26555.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is not something that should be used on a frequent basis, and
giving it a short option encourages use without making the drawbacks
obvious. For the 1% of situations that require it, the 5 extra
keystrokes are a fair price to pay.
Signed-off-by: Dan McGee <dan@archlinux.org>
This replaces several printf calls of the following styles:
printf("%s", ...);
printf("some fixed string");
printf("x");
We can use either fputs() or putchar() here to do the same thing
without incurring the overhead of the printf format parser.
The biggest gain here comes when we are calling the print function in a
loop repeatedly; notably when printing local package files.
$ /usr/bin/time ./pacman-before -Ql | md5sum
0.25user 0.04system 0:00.30elapsed 98%CPU
$ /usr/bin/time ./pacman-after -Ql | md5sum
0.17user 0.06system 0:00.25elapsed 94%CPU
$ /usr/bin/time ./pacman-before -Qlq | md5sum
0.20user 0.05system 0:00.26elapsed 98%CPU
$ /usr/bin/time ./pacman-after -Qlq | md5sum
0.15user 0.05system 0:00.23elapsed 93%CPU
So '-Ql' shows a 17% improvement while '-Qlq' shows a 13% improvement on
382456 total files.
Signed-off-by: Dan McGee <dan@archlinux.org>
This one is pretty darn useless. Just derefence the ->data attribute
since the type is public anyway and save yourself the function call.
Signed-off-by: Dan McGee <dan@archlinux.org>
