Original-work-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
* convert dbpath from argument to option
* add --config and --root options
* read dbpath and root from config file
* if root is set but not dbpath, dbpath is set relative to root
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This eval enables the following in a PKGBUILD to "just work":
source=('$pkgname-$pkgver.tar.gz'::'https://host/$pkgver.tar.gz')
This has at least two problems:
- It violated the principle of least surprise.
- It could be a security issue since URLs are arbitrary input.
Instead, expand the dlagent command line into an array, replace the %o,
%u place holders, and run the resultant command line as is.
Embedded spaces in the DLAGENTS entry can be escaped with a backslash.
Fixes FS#41682
Signed-off-by: Allan McRae <allan@archlinux.org>
Git has the ability to use helper applications for interfacing with hg,
and from what we had before, the following url::
foo::git+hg::http://foo.bar/foobar
would get converted to something along the lines of:
filename: foo
URL: http://foo.bar/foobar
and the 'git+hg' part would essentially be ignored when it's getting set
up in the 'get_protocol' and 'get_downloadclient' functions. With this
patch it is possible to have a source link with '::' in it, however it
is not possible to have a filename with '::', which is the current
behavior.
Signed-off-by: Allan McRae <allan@archlinux.org>
Prevents trust being spoofed by using TRUST_FULLY in the signatory's name
or in an added notation.
Fixes FS#41147.
Signed-off-by: Allan McRae <allan@archlinux.org>
This introduces support for architecture-specific conflicts, depends,
optdepends, makedepends, replaces, and conflicts by appending "_$CARCH"
to the array name. For example, in the global section:
arch=('i686' 'x86_64')
depends=('foo')
depends_x86_64=('bar')
This will generate depends of 'foo' and 'bar' on x86_64, but only 'foo'
on i686. Moreover, this is supported in the package functions with the
same heuristics as the generic names, e.g.
...
arch=('i686' 'x86_64')
depends=('foo')
...
package_somepkg() {
depends_x86_64=('bar')
...
}
Again, will cause x86_64 to have depends of 'foo' and 'bar', but only
'foo' for i686.
Break apart each of the blocks into their own separate functions. And,
instead of the hand crafted eval statements, reuse the logic from
pkgbuild-introspection[0] to abstract away the complexities of parsing
bash.
This commit fixes at least 3 bugs in check_sanity:
1) The wrong variable is shown for the error which would be thrown
when, e.g. pkgname=('foopkg' 'bar^pkg')
2) The "arch" variable is not sanity checked when the PKGBUILD has
an arch override, but only one output package.
3) https://bugs.archlinux.org/task/40361
Lastly, there's some string changes here which should help to clarify
a few errors emitted in the linting process.
[0] https://github.com/falconindy/pkgbuild-introspection
Dependencies are now handled with --nobuild unless specificially skipped.
Using --verifysource will skip dependency checks unless --syncdeps is
specified.
Fixes FS#35057 and FS#36999.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add an array VCSCLIENTS to makepkg.conf that matches vcs source protocols
to the package containing the software needed for handling the source.
Signed-off-by: Allan McRae <allan@archlinux.org>
The documentation very clearly states that the buildfile has to be in
$PWD, but the error thrown by makepkg reference some mysterious "build
directory". Simplify this check so that we more directly check that the
file being referred to is in fact in our $PWD. Revise the error message
when the check fails to more plainly point out the problem.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add support for following the XDG Base Directory Specification when
reading the user-specific configuration file.
If no $XDG_CONFIG_HOME/pacman/makepkg.conf file exists we fall back to
sourcing $HOME/.makepkg.conf
Signed-off-by: Johannes Löthberg <johannes@kyriasis.com>
[Allan] Note XDG_CONFIG_HOME takes priority.
Signed-off-by: Allan McRae <allan@archlinux.org>
After resourcing the PKGBUILD in update_pkgver(), set the epoch to 0
if it is empty. Also adjust the get_full_version function to be more
robust if epoch somehow still is empty.
Fixes FS#41022.
Signed-off-by: Allan McRae <allan@archlinux.org>
This ensures packages build on a UTF-8 locale system with non-ASCII character
names can be installed on non-UTF-8 systems.
Signed-off-by: Allan McRae <allan@archlinux.org>
Remove the comment above the signature generation command as the command
is self explanatory and no longer does what the comment says.
Signed-off-by: Allan McRae <allan@archlinux.org>
We expect all source file to lie in $startdir. However, using
"makepkg -p <buildscript>" can currently allows people to specify buildscripts
in other directories. This results in confusion about where other sources
should lie (in startdir or in the directory that the buildscript is in).
Explicitly disable using -p for files in other directories to avoid this issue.
Fixes FS#40293.
Signed-off-by: Allan McRae <allan@archlinux.org>
If validpgpkeys is set in the PKGBUILD, signature checking fails if
the fingerprint of the key used to create the signature is not listed
in the array.
The key's trust value is ignored.
Signed-off-by: Allan McRae <allan@archlinux.org>
Instead of invoking grep multiple times, parse the status file once.
This refactoring also changes the behvaiour when signature verification
fails due to a missing public key: It is now an error instead of a
warning.
Signed-off-by: Allan McRae <allan@archlinux.org>
Provide pkgbase information for non-split packages with pkgbase set.
Also record the version of the "base" package. This is useful for
matching package files to source packages.
Signed-off-by: Allan McRae <allan@archlinux.org>
Packaging outside of fakeroot can result in incorrect permissions for
package files. It has been years since fakeroot issues during packaging
were common, so it is safe to enforce fakeroot usage. If using fakeroot
is impossible for some reason, a two line wrapper script will suffice to
fool makepkg.
Signed-off-by: Allan McRae <allan@archlinux.org>
The days of fakeroot being error ridden are long gone, so there is no
valid reason to run makepkg as root.
Signed-off-by: Allan McRae <allan@archlinux.org>
1. Packagers who want to test the package() function, i.e. to check the content
of the pkg/ folder.
2. Developers who want to check how the packaged version of a program looks, in
other words how the pkg/ folder looks.
3. For users of systems with no port tree, makepkg can ease package creation.
However the resulting archive of the whole makepkg process is often useless.
For all situations, makepkg will usually be called several times. But no archive
(the final package) is needed in any cases. The archive creation ends up being a
waste of time and resource, especially for big applications and slow machines.
Since this option aborts the process prematurely, it behaves like the
-o,--nobuild option, i.e. any other option acting on later stages in the process
will be automatically discarded. For --noarchive, it means that in
$ makepkg --noarchive --install
the '--install' option does not do anything.
Signed-off-by: Pierre Neidhardt <ambrevar@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Previously, install_package() return code was either used as exit code or
ignored. This was rather confusing. The return code is now always ignored and a
comment on install_package() has been added.
Signed-off-by: Pierre Neidhardt <ambrevar@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Files hosted on kernel.org only provide signatures for the uncompressed tarball.
Support this scheme by transparently uncompressing the archives and piping
the data into gpg.
Signed-off-by: Allan McRae <allan@archlinux.org>
I noticed when I built a kernel package with options 'strip' and 'debug' that
the debug package was missing the debug information for the kernel modules.
This patch adds kernel modules to the targets for 'strip' and is compatible
with the split-out debug information packages.
v2: Correct logic error -- did a 'continue' after the 2nd-level case statement
instead of in the default case.
v3: Oops, forgot to terminate outer case. Ran this version through the test
suite and all tests passed.
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Allan McRae <allan@archlinux.org>
makepkg only aborts on errors during PKGBUILD functions so the remaining
"|| true" statements are unneeded.
Signed-off-by: Allan McRae <allan@archlinux.org>
It turns out that you should refer to variables by their actual name...
Introduced in commit a521cea9.
FS#38414.
Signed-off-by: Allan McRae <allan@archlinux.org>
FS#34240. This is useful for translators and has little cost to us since
we moved to transifex for translations.
Signed-off-by: Allan McRae <allan@archlinux.org>
If the user has "armor" in thier gpg.conf, makepkg will create an
ascii-armored signature. Use --no-armor in the gpg call to avoid.
FS#38503.
Signed-off-by: Allan McRae <allan@archlinux.org>
Forcing vim users to view files with a tabstop of 2 seems really
unnecessary when noet is set. I find it much easier to read code with
ts=4 and I dislike having to override the modeline by hand.
Command run:
find . -type f -exec sed -i '/vim.* noet/s# ts=2 sw=2##' {} +
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
Running 'makepkg -g' or 'makepkg' to download source files results in
different permissions on the files if the user has a non-default umask.
Put the umask definition at the "beginning" of the makepkg script to
ensure all files generated by makepkg have a 0022 umask.
Signed-off-by: Allan McRae <allan@archlinux.org>
Unify the formatting of the --help switch for pacman utils, if it exists.
All of the pacman utils will now output help text using the following
format:
util-name (pacman) v<pacman version>
one line description of util's purpose
Usage: util-name [options]
-b, --bar whatever --bar does
-f, --foo whatever --foo does
-h, --help display this help message
Reported-by: Karol Błażewicz <karol.blazewicz at gmail.com>
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
This commit:
-- replaces space-based indents with tabs per the coding standards
-- removes extraneous whitespace (e.g. extra spaces between function args)
-- adds missing braces for a one-line if statement
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
The call to bsdtar to check if a file needs extracted returns 1 if it does
not. We then propegate this return value accidentally which can cause
makepkg to report an error later on. Explicitly return 0 in this case.
Signed-off-by: Allan McRae <allan@archlinux.org>
It is fairly common that packages contain static libraries with no
shared counterpart. These should not be removed with !staticlibs.
Signed-off-by: Allan McRae <allan@archlinux.org>
It appears there are a lot of packages with arch=('i686 x86_64')
floating around. Quote the arch array when passing as a parameter
to detect such things.
Signed-off-by: Allan McRae <allan@archlinux.org>
Validate the new pkgver efore blindly ramming it into the PKGBUILD.
This gives us good feedback and prevents corrupting the PKGBUILD, e.g.
==> Starting pkgver()...
==> ERROR: pkgver is not allowed to contain colons, hyphens or whitespace.
==> ERROR: pkgver() generated an invalid version: a horse is not a pkgver
As an additional failsafe, exchange a valid for invalid character as
command separator in @SEDINPLACE@ expressions. For even more paranoia,
exit if sed fails for any reason.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This points makepkg to where is library is located. Can be
overridden by value in the environment.
Signed-off-by: Allan McRae <allan@archlinux.org>
[Ashley: Rebased]
Signed-off-by: Ashley Whetter <ashley@awhetter.co.uk>
Build makepkg to scripts/.lib/makepkg and add a wrapper script to
call it. This is not useful at the moment, but is the first step
to allowing makepkg to be split into smaller pieces.
Signed-off-by: Allan McRae <allan@archlinux.org>
[Ashley: rebased]
Signed-off-by: Ashley Whetter <ashley@awhetter.co.uk>
The separation between downloading and extracting for non-vsc sources
was incomplete due to symlinks being made in $srcdir during the download
stage. Have download_{local,file} just ensure the presence of the files
in $startdir or $SRCDEST (downloading if needed) and then have
extract_file symlink these files into $srcdir.
Also replace "continue" with "return" in extract_file to make it clearer
what is happening.
Signed-off-by: Allan McRae <allan@archlinux.org>
These loops already maintain an independent loop counter, so cut out
the middle man. While this change doesn't necessarily require that we
drop support for sparse arrays, we do via this patch. A new lint check
is added in check_sanity to abort when a sparse array is encountered.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
These are all cases where we're reading filenames -- any backslashes
are intentional and should not be interpreted.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
With some simple math and printf formatting tokens, we can create the
whitespace necessary for this without the need for a loop and string
concatentation.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Unifying this list makes adding new algorithms easier. There's also
some menial cleanup in this patch to avoid use of eval and properly
treat lists of data as array instead of simple strings.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This allows for VAR=value and VAR+=value variable declarations.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
These references to bug numbers assume we will forever be using that bug
tracker. It is better to properly comment the code instead (which was
done in almost all cases anyway).
Signed-off-by: Allan McRae <allan@archlinux.org>
Replace spaces with tabs in one instance.
Remove extra spaces.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
When maintaining a custom repo, often it is undesirable to retain older
versions of packages. This patch adds the --remove option to remove the
current package file and it's signature from disk before adding the new
one to the database. Documentation is also updated. This is an optional
flag and default behaviour (leaving ondisk files alone) is not changed.
Signed-off-by: Phillip Smith <fukawi2@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Given a revoked keyring containing only:
BC1FBE4D2826A0B51E47ED62E2539214C6C11350
We should only disable this specific keyid. This change enforces that the
contents of the -revoked keyring file are full fingerprints which can uniquely
identify a key.
Before:
# pacman-key --populate archlinux
==> Appending keys from archlinux.gpg...
==> Locally signing trusted keys in keyring...
-> Locally signing key 0E8B644079F599DFC1DDC3973348882F6AC6A4C2...
-> Locally signing key 684148BB25B49E986A4944C55184252D824B18E8...
-> Locally signing key 44D4A033AC140143927397D47EFD567D4C7EA887...
-> Locally signing key 27FFC4769E19F096D41D9265A04F9397CDFD6BB0...
-> Locally signing key AB19265E5D7D20687D303246BA1DFB64FFF979E7...
==> Importing owner trust values...
==> Disabling revoked keys in keyring...
-> Disabling key 1390420191...
-> Disabling key E2539214C6C11350...
-> Disabling key 8544EA82113502DE...
==> Updating trust database...
gpg: next trustdb check due at 2014-01-22
After:
# pacman-key --populate archlinux
==> Appending keys from archlinux.gpg...
==> Locally signing trusted keys in keyring...
-> Locally signing key 0E8B644079F599DFC1DDC3973348882F6AC6A4C2...
-> Locally signing key 684148BB25B49E986A4944C55184252D824B18E8...
-> Locally signing key 44D4A033AC140143927397D47EFD567D4C7EA887...
-> Locally signing key 27FFC4769E19F096D41D9265A04F9397CDFD6BB0...
-> Locally signing key AB19265E5D7D20687D303246BA1DFB64FFF979E7...
==> Importing owner trust values...
==> Disabling revoked keys in keyring...
-> Disabling key BC1FBE4D2826A0B51E47ED62E2539214C6C11350...
==> Updating trust database...
gpg: next trustdb check due at 2014-01-22
Partially addresses FS#35478. This does nothing to confirm whether or not the
key was successfully disabled -- a ridiculously simple request which appears to
be far too difficult for gpg to manage.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Adding this restriction means we can filter any FILENAME entry from
starting with a "/" or a ".". Use the term "dot" as it is more
computing relevant compared to "full stop" or "period" which vary
depending on English locale.
Signed-off-by: Allan McRae <allan@archlinux.org>
given/when has been marked experimental in perl 5.18 because it will
change it 5.20. if/else is ugly, but hiding the generated warning is no
good solution either, so we us if/else for now.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
This also slighty changes the word order in the description for
--newest.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
This allows for somewhat easy templating for PKGBUILDs.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
Add support for overriding configuration in /etc/makepkg.conf and
~/.makepkg.conf by setting the environment variable CARCH similar to
how SRCDEST and PKGDEST behave.
Fixes FS#35030.
Signed-off-by: Allan McRae <allan@archlinux.org>
Not having a package() function means all building occurs as root
and repackaging can lose permissions. Given the use of package()
functions has been around for years and we deprecated not having
one in pacman-4.1, we can remove support for PKGBUILDs without
package() functions altogether. However, keep PKGBUILDs that have
neither a build() or package() function working.
Signed-off-by: Allan McRae <allan@archlinux.org>
Using PKGBUILDs from stdin means that we can not use pkgver() in
packages. Given we have the "-p" option to pass any file to
makepkg and passing a PKGBUILD in the form "cat foo | makepkg"
does not work, this feature is unneeded.
Signed-off-by: Allan McRae <allan@archlinux.org>
If LOGDEST is set, we may not check that $startdir is writable. Store
the log pipe in LOGDEST instead.
Signed-off-by: Allan McRae <allan@archlinux.org>
bzr support "worked", but didn't handle any of the actual features we
wanted with makepkg. This moves the revision specification to the proper
place (extraction, rather than download), and fixes an additional broken
reference to $repo which was never set.
Fixes FS#35281.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This new option disables the prepare function. Useful in combination
with -o to get an unpatched copy of the sources for testing purpose.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
If stdout is already redirected, redirecting stderr to stdout can lead
to undesirable results.
Fixes FS#34974.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Copy SVN repos rather than using "svn export" to keep all anotation
files in the repo for build scripts that use (e.g.) "svin info".
Signed-off-by: Allan McRae <allan@archlinux.org>
Using the checkout directory for the SVN config can result in clashes
between config files and files from the SVN checkout. Instead, use
a ".makepkg" directory within the checkout.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add support for all bzr URLs, including "lp:" URLs, in the source array.
This, however, requires an internet connection and will fall back to the
current behavior for offline builds. In that case, only the URL reported
by 'bzr config parent_location' run inside the local repo can be used,
and is outputted.
Signed-off-by: Maxime Gauduin <alucryd@gmail.com>
remove_deps already has a check and won't run unless -r is specified, so
if this was meant to remove dependencies of a failure no matter what,
then it's not doing it, and with -r it is run twice on a failure for no
real reason.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
All those extra '\e[1;'s were just setting bold redundantly or
immediately being cancelled.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Bug exposed by a6291858cc
popd doesn't run in the for loop in download_sources() if the continue
in download_files is executed. Causing the extract_files to extract
everything into $SRCDEST instead of $srcdir
Signed-off-by: Allan McRae <allan@archlinux.org>
grep allows options to be set from the environment with GREP_OPTIONS.
Many of these options will alter grep's output, breaking makepkg.
GREP_OPTIONS=--line-number breaks installed dependency removal, for
instance.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
When VCS sources were updated, we changed into their root directory.
Any following source was then downloaded to an incorrect place causing
a failure in makepkg. Ensure we are always in the $SRCDEST directory
before starting any download.
Fixes FS#34488.
Signed-off-by: Allan McRae <allan@archlinux.org>
I imported this translation from transifex without realising that there
was no strings translated despite being "acitve" on transifex for quite
some time. Remove it until translation begins...
Signed-off-by: Allan McRae <allan@archlinux.org>
This reverts commit 8b03b1a877.
It is much better to download the submodules using separate source entries
and adjust the submodule configs to point at these versions in the
prepare() function.
See https://mailman.archlinux.org/pipermail/pacman-dev/2013-March/016771.html
for an example.
Signed-off-by: Allan McRae <allan@archlinux.org>
Looks like I hosed this pretty hard in 5a5e712c74.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Because --noextract also implies to not download/verify source files, it wasn't
possible to simply do that, without either extracting and/or building.
(Note: --verifysource takes precedence over --noextract)
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Make all VCS download functions uses get_filename to get the repo name.
In addition, creating a working directory from a Bazaar repository now shows
the short-name of the repository, not the full path on disk.
I'm not sure if the name of the variable that holds the basename of the local
clone should still be `repo`, but I have left the variable name for simplicity.
Signed-off-by: Neer Sighted <neersighted@myopera.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Previously makepkg would clone vcs sources in the download function,
regardless of the noextract settings. Now the download_* functions only
download or update the vcs sources, and the new extract_* functions just
create working copies using the specified protocols. The extract_sources
function will call the needed extract function for the protocol
specified. The tarball extraction has also been moved into its own
extract_file function to keep things consistent.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Added an `ask` message function that emulates pacman's appearance.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Color enabled by default, use --nocolor to disable colored output.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Use --nocolor to suppress colored output from pacman-key, otherwise
output will be in color.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Color enabled by default, use --nocolor to turn off colors.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Use the same colors as makepkg in messages. Add in the 'plain' function
as well.
To use the colors, you need to include the term_colors.sh file, or add
definitions for the colors explicitly.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Make makepkg use a recursive clone when creating the working directory.
This will initialize submodules
Signed-off-by: Allan McRae <allan@archlinux.org>
Supported by libarchive as of version 3.1.0 when compiled against lzo2
or in the presence of the lzop binary.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
In makepkg, passing -sr --needed causes there to be a conflict when
pacman goes to remove the dependencies, as the --needed flag is not an
option for pacman -R. This patch makes --needed not get added to the
PACMAN_OPTS array, but it acts like ASDEPS, and is only added to an
install function.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The idea of having separate build() and package() functions is that
build() is run as a normal uses and package() as (fake)root. Any
files placed in $pkgdir during build() can have the wrong permissions.
Restrict access to $pkgdir during build() - unless there is no package()
function.
Also, set $pkgdir to something "useful" during build(). For split
packages, this uses "<path>/pkg/$pkgbase" because it is not obvious
which $pkgdir is being referred to.
Signed-off-by: Allan McRae <allan@archlinux.org>
Rearrange tidy_install so we first remove docs, unwanted files,
libtool files, and empty directories. Then check for missing backup
files and references to $srcdir and $pkgdir. Finally compress manpages,
strip debug symbols, and compress executables with upx.
Fixes FS33318
Signed-off-by: Chirantan Ekbote <chirantan.ekbote@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The difference between the echo and the printf's in write_pkginfo seemed
to be somewhat sporadic. Also, the INFAKEROOT check was doing the same
exact thing as the SPLITPKG check, but formatted much differently and
consuming two extra lines. I think this makes it more readable than it
was previously, if nothing else.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Packages are already in the pkg db were given a warning, and then
readded anyway. With -n specified, the warning is printed, but skips
readding it.
Signed-off-by: Danny George <dangets@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
When building sources with a pkgver function, makepkg will print out the
original version before pkgver() is run, claiming that that is the
package that will be built. This patch simply re-prints the output
later, after pkgver() has been run so people can see which package they
are actually building.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
