* Updated all of the language files, as the POT file was updated. NOTE FOR
TRANSLATORS, try to base your next contribution off of these, notice how
some msgids and messages have been wrapped to the next line- it makes it
easier to read anyway.
* More Makefile.am/configure.ac updates. 'make dist' and 'make distclean' now
work properly, with only one caveat- the automatic testing in distclean
doesn't do so hot as it is compiled with a default configure, which includes
the fakeroot-proof code (which does not cooperate with pactest).
* Added a Makefile.am for the pactest directory.
from one package to another seemlessly (knock on wood). This is implemented
through the use of two skip lists in the trans struct- skip_add and
skip_remove, which replace the former trans->skiplist.
* Removed an unnecessary function parameter, added a necessary one.
* If a package has no backup files, print '(none)' under the heading so it is
more obvious.
* Updated my TODO list.
- the code should be clearer, more organized, commented, and have worthwhile
variable names now
- proactive backup=()s now work. That is, adding a file to a backup array
does what it should on the upgrade to that package, no longer forcing you to
wait a full upgrade cycle for it to take effect
* ldconfig was being run twice on an upgrade operation - fixed
* fixed another pm_fprintf/printf output corruption with the progress bars
* refactored some duplicate code for adjusting 'requiredby' lists
* Added config.rpath to .cvsignore
MSG/ERR usage earlier, the trailing '\n's are no longer needed
* Oddly enough - *ADDED* some '\n's to the sync_info errors (last commit) as the
package info output does not use the pm_fprintf facility and thus does not
honor our newline/no-newline setup
* Updated pot translation templates
* Located culprit of progress bar moving when unicode characters are used,
added a TODO note about it
* Removed '(target)' string from the sync.c error message, just like we did
from add.c yesterday
* Updated my TODO
Douglas Soares de Andrade <douglas@archlinux-br.org>, 2007.
Hugo Doria <hugodoria@archlinux-br.org>, 2007.
Lincoln de Sousa <lincoln@archlinux-br.org>, 2007.
Leandro Inácio <leandro@archlinux-br.org>, 2007.
unbelievable amount of strcmp() calls (25 million) due to the list searching.
This has been reimplemented with a set-intersection scheme, due to the fact
that file lists are always ordered. - NEEDS TESTING
* Minor clean up, "globalized" the str_cmp helper to match the alpm comparison
signature, so we can use it elsewhere.
* Makefile targets to rebuild po files now work - use 'make update-po' in
the po directories.
* Added two new translation templates as requested on the ML- 'it' and
'pt_BR'.
This commit might be a bit big for the mailing list to like on the commit
message. :)
* change to Mb and Gb for both total size and transfer rate if needed
* round up to 1 second for downloads that were between 1s and 0.5s
This function needs some serious looking at, as it's probably not 64bit safe (thus the "wrong calculation" problem on the list).
packages to be upgraded in a -Su operation. Much of the code is duplicated from
sync.c.
TODO: move the implementation to upgrades.c, and reimplement the sync_sysupgrade
function in terms of this:
trans->packages = alpm_get_upgrades();
operations (now aborts on a corrupt archive)
* Fixed the pm_fprintf newline error that was plaguing us. It seems a line
resetting 'neednl' was removed a while back (by me). This causes all the
output errors we've been seeing
* fixed progress output (needs an fflush to move cursor properly)
* broke display_targets function out, to display a list of syncpkgs in
preparation for a -Qu option
* added get_update_time function to deal with progress functions that shouldn't
update too fast due to output redraw speeds
* Removed useless buildstring function from util.h; replaced all calls of it
with list_display.
* Made list_display output 2 spaces instead of 1 between each item.
* The --debug params were goofy. New setup allows --debug without params,
--debug=<level> where level 1=debug output, 2=debug and download output,
3=debug, download, and function tracing output. This seems more sane to me.
* Removed PM_LOG_FLOW1 and PM_LOG_FLOW2. They were just confusing. When adding
new functions, it is near impossible to determin if your output should be
"flow1" or "flow2" without tracking all the way up the call chain. Rarely
would one ever say "ok, lets just show "flow2" output. These have both been
replaced with PM_LOG_DEBUG
* Removed the need for the root parameter on alpm_initialize. it is now
defaulted to PM_ROOT just like dbpath and cachedir. This allows alpm to be
initialized BEFORE option parsing in the front end, saving us some duplicate
variables in the frontend.
* Cleaned up front end variables due to early alpm_initialize call.
* Fix up add.c a bit better than it was in regards to FS #3492.
* Optimized the sqrt call in dependency cycle checking to a single call.
* Removal of an outdated comment.
* alpm_list_is_in --> alpm_list_find
* alpm_list_is_strin --> alpm_list_find_str
* Flip parameters of both functions to be inline with rest of alpm_list.
First commit, woohoo.
* Added alpm_list_remove_node for single list node removal
* Proper error checking/output for failed db_read/db_write (missing files)
* Invalid packages (missing files) are now removed from the package cache
* -Qs and -Ss output now look the same
* config.rpath causes errors on one machine I had, so I added it to CVS
* Fixed a "clobbered memory" issue when installing groups - only the outer list
should be free'd, not the contained data
optimizations in order to make the code much more readable and
type-checkable. Every enum in the library now has it's own type that
should be used instead of the generic 'unsigned char'. In addition,
several #define statements dealing with constants were converted to
enums.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
* Fixed -Ss output so as not to call alpm_list_getdata with a NULl list
* Added a NULL check in alpm_list_getdata
* Fixed alpm_list_add_sorted to properly handle a new / beginning insertions
* renamed pmlist_t -> alpm_list_t
* made alpm_list_t a public type (alpm_list.h header)
* removed additional storage for registered DBs in pacman source
* some code cleanup
* removed duplicate (pm)list_display functions from pacman source
* misc code cleanup
* Removed some unnecessary headers and library links
* Made things static if possible
* Cleaned up makefiles a bit
* Fixed some old comments in the code
* Fixed some errors the static code checker splint pointed out
* Backwards arguments in a memset call in _alpm_db_read (could have been worse)
* Other various small fixes
Other:
* Default to 80 columns when getcols cannot determine display width
* Removal of ._install as a valid install file in packages
* Added libdownload check in configure.ac
* Added generation for mirrorlists in pacman.d
NOTE: autoconf sucks for things like this, so gen-mirrorlist is required
Dan McGee <dpmcgee@gmail.com>:
* mirrorlist.in file
Roman Kyrylych <roman.kyrylych@gmail.com>:
* ukrainian mirror
Jürgen Hötzel <juergen@hoetzel.info>:
* conditional build for pacman.static
statement with ' ' until the size of the terminal. The rationale is that, when
a log message is emitted during progress bar display, the terminal is artifacted.
This prevents that messiness.
* Modified some dependancy checking
* Changed "performing local database upgrade" message to be more clear
* Change 'usize' to 'isize' in database files
* Scriptlet output is now sent to pacman's log file
* Limited some debugging output to be more clear
* libalpm api changes - move from a _getinfo(p, WHAT_WE_WANT) scheme to a
typesafe _get_what_we_want(p) scheme [not 100% complete yet]
* some const correctness changes
* removal of PM_* types in alpm.h in favor of the pm*_t types used throughout
libalpm
* Addition of hacky architecture check in the _splitname function
* Removal of libfetch from the archlinux proper - it has been renamed to
libdownload and can be found at http://phraktured.net/libdownload
* Merge of _some_ of the Frugalware makepkg change - this may still be
incomplete
* Removal of libftp from cvs proper
* PKGBUILD manpage now says 'PKGBUILD' instead of FrugalBuild (he he)
* Added 'ILoveCandy' support to all progress bars
* Changed download callback with regards to libfetch libalpm changes
* libfetch error output on failed sync
* Misc others I may have forgot to name (check the diff, heh)
* Removed the PMList typedef, in favor of the same naming scheme other
structs use 'pmlist_t'
* Added a time stamp on debug output, to make it more informational
* Moved alpm_db_register to _alpm_db_register, making the public function
not take a callback parameter
