Use std::queue instead of std::set, we don't need such a heavy container.
Don't convert position to int to convert it back to float in the next function.
The legacy code added in commit
d879a539cd - "Add minetest.swap_node"
for sending the whole mapblock to older clients on the case of a node
modification with swap_node, had the problem that the block chosen to be
sent to the client was referenced with node coordinates and not with
block coordinates, resulting in getting the wrong block sent to the client.
Entity positions are serialized as F1000. Disallow placing
entities outside safe borders with the minetest.add_entity
call.
Note that this patch only enforces those boundaries for
placing entities, moving entities that move outside boundaries
aren't affected.
Thanks to @nanepiwo for pointing this out.
1. Do two renames:
* SER_FMT_CLIENT_VER_LOWEST -> SER_FMT_VER_LOWEST_WRITE
* SER_FMT_VER_LOWEST -> SER_FMT_VER_LOWEST_READ
Now the two define values are consistently named with the _WRITE defines
SER_FMT_VER_{HIGHEST,LOWEST}_WRITE, and to better point out what the two
serialisation versions actually are for.
2. wrap some lines in doc/worldformat.txt, and point out that the node
timers are serialized at a later point, as this can cause confusion about
what now happens (if one doesn't strictly read the if block's conditions).
3. some whitespace fixes in NodeTimerList::serialize, and one new comment.
Modders are now able to select the range of ore column height,
and the midpoint at which they 'grow' starting from.
This commit adds three new parameters for the 'sheet' ore type:
column_height_min, column_height_max, and column_midpoint_factor.
clust_size is now deprecated for this ore type.
Its obvious that "u16 command" is inside every packet, therefore this
commit removes all mentions of the command, if non-array like notation
is used. We already didn't add "u16 command" to new packets or removed
it at packet changes, so now we remove it from existing packets.
Use in-place locale directory if that exists, and
static one (RUN_IN_PLACE or CUSTOM_LOCALEDIR) doesn't exist.
Report to errorstream if neither static nor in-place locale
dirs exist, and report successfully found paths to infostreem.
Fixes two bugs:
-> Regression of commit [1] where if we use RUN_IN_PLACE=false,
but don't make install, locales aren't found. One might
think this is no regression, as its no bug, but all other
paths (mainmenu, etc.) are detected properly.
-> Regression of commit [1] where locales don't work on windows.
References:
[1]: Commit 645e208673 "Use CUSTOM_LOCALEDIR if specified" by @ShadowNinja
Before, calling get_areas_in_area for an areastore with both
include_borders and include_data would result in a lua error,
if there was at least one area as result:
attempt to index a number value in function 'get_areas_in_area'
The commit
8f9af57314 "Add core.get_dir_list" by @ShadowNinja
has removed the implementation of the l_get_dirlist function and all its usages
from the l_mainmenu.cpp file, but hasn't removed it from the header file.
The reason why this hasn't been detected earlier is that C++ has this interesting
feature to still make it possible to create instances of classes whose never used
private methods are declared but not defined.
Preserves the rare unbroken protruding dungeons
Fix random range for first room roomplace
Fix checked volume for first room 'fits' bool
and check for 'untouchable' flag instead of 'inside'
Remove 'enable floating dungeons' setting
* Rename everything.
* Strip J prefix.
* Change UpperCamelCase functions to lowerCamelCase.
* Remove global (!) semaphore count mutex on OSX.
* Remove semaphore count getter (unused, unsafe, depended on internal
API functions on Windows, and used a hack on OSX).
* Add `Atomic<type>`.
* Make `Thread` handle thread names.
* Add support for C++11 multi-threading.
* Combine pthread and win32 sources.
* Remove `ThreadStarted` (unused, unneeded).
* Move some includes from the headers to the sources.
* Move all of `Event` into its header (allows inlining with no new includes).
* Make `Event` use `Semaphore` (except on Windows).
* Move some porting functions into `Thread`.
* Integrate logging with `Thread`.
* Add threading test.
This bypass had to be re-enabled as some users reported issues,
even after the iconv build fix.
While utf8_to_wide works well, wide_to_utf8 is quite broken
on android, for some reason, and some devices (unrelated from build
configuration).
Before, this lua code led to a crash:
local pcg = PcgRandom(42)
local value = pcg:next()
This was because if you called s32 PcgRandom::range(min, max) with the
minimum and maximum possible values for s32 integers (which the lua
binding code did), u32 PcgRandom::range(bound) got called with 0 as the
bound. The bound however is one above the maximum value, so 0 is a "special"
value to pass to this function. This commit fixes the lua crash by
assigning the RNG's full range to the bound 0, which is also fits to the
"maximum is bound - 1" principle, as (u32)-1 is the maximum value in the
u32 range.
When tunnels entirely above ground were avoided, the
missing pseudorandom calls changed the allowed caves.
Now, above ground tunnels are not placed while
still running all previous pseudorandom calls.
Multiplying by a factor of 1/1000.f (rather than dividing by 1000.f) directly
introduces an error of 1 ULP. With this patch, an exact comparison of a
floating point literal with the deserialized F1000 form representing it is now
guaranteed to be successful.
In addition, the maxmium and minimum safely representible floating point
numbers are now well-defined as constants.
Before, android_version.h got changed at every new commit. Now, we
only change it with new minetest releases. Analogous to how cmake
does it, we add an android_version_githash.h file that communicates
the git hash to C++ code.
Also, unify VERS_MAJOR, VERS_MINOR and VERS_PATCH variable
calculation inside the whole makefile.
-> Remove the SendableMediaAnnouncement struct
-> Forge the packet directly in the m_media loop, spare one loop and the construction of a vector
-> Use preincrement to spare iterator copies
Before, our libiconv build was a joke. We first called configure for our own build host system,
then called make, before we executed a Android.mk script we provided as patch. The first "native make"
always failed, and the LIBICONV_LIB file setting in our Makefile didn't match the built one,
resulting in an always-rebuild of iconv.
This commit cleans up this total mess, removes the double-build, and the Android.mk, and properly calls
./configure with the according target platform, and uses a built toolchain.
As we have to deal with the android bug "NDK: Support for prebuild libs with full sonames"
https://code.google.com/p/android/issues/detail?id=55868
as the 2013 patch
https://lists.gnu.org/archive/html/libtool-patches/2013-06/msg00002.html
by Google's David Turner wasn't inside the 2011 libtool, we pass -avoid-version to
libtool.
Thanks to the proper build, wide_to_utf8 works for android now, removing us of the need to disable it.
This was needed due to the TileDef serialisation changes. Originally it has been planned
to also add utf-8 based chat to 26, but chat changes aren't final yet, so they are done
in one change, after the release, and not two small ones, causing us having to be compliant
to three versions of the packet.
-> Fix server crash with protocol >=25 if a default password is set.
-> Remove some useless and possibly confusion causing code for the TOCLIENT_FIRST_SRP packet handler
-> Fix bug where MoveSomewhere from an infinite source would fill the destination inventory with copies of itself.
-> Fix bug where MoveSomewhere would needlessly call callbacks.
-> Remove trailing whitespaces
The neighbours checked are the 8 nodes horizontally surrounding the decoration base
and the 8 nodes horizontally surrounding the ground node below the decoration
Use wide_to_utf8 and utf8_to_wide instead of wide_to_narrow and narrow_to_wide at almost all places.
Only exceptions: test functions for narrow conversion, and chat, which is done in a separate commit.
Previously, m_proto_ver was set to the serialisation version
inside the legacy init packet.
Now, if the server doesn't send a protocol version (protocols < 25),
we set m_proto_ver to some value < 25 and > 0.
