This converts our script generation to use the built-in AM_V_GEN macro,
which honors the V= setting passed to make and allows one to see the
full command if they truly desire. The AM_V_at macro is also used in
place of an explicit @ so verbose-mode compiles show all commands being
run.
We can also use these two macros in doc generation to quiet it down to
the level we expect.
Other minor changes:
* a pointless test call is removed in test/pacman/tests/
* sed is used instead of dos2unix as we depend on it anyway
* consecutive chmod calls are reduced to a single call (e.g., '+x,a-x')
Signed-off-by: Dan McGee <dan@archlinux.org>
Be more semantically accurate and avoid accidental overwriting of some
configuration variables that are considered to be constant.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents user error in adding a file generated via `gpg --sign`
rather than `--detach-sign`, for example. The same 16KiB limit is used
we use in our pacman download code.
The section is moved above the checksum generation to avoid presenting
info messages to the user if the signature isn't valid.
Addresses a shortcoming pointed out in FS#27453.
Signed-off-by: Dan McGee <dan@archlinux.org>
Whereas comm will check inputs to see if they're sorted (and warn when
they aren't), grep doesn't even care about ordering. In this particular
instance -- neither do we. We're only interested that the two lists are
equivalent.
Fixes FS#26580.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add support for overriding configuration in /etc/makepkg.conf and
~/.makepkg.conf by setting the environment variable PACKAGER similar to
how SRCDEST and PKGDEST behave.
Signed-off-by: Allan McRae <allan@archlinux.org>
This addresses a short but sweet race condition currently existing in
repo-add and repo-remove. We do the smart thing and zip the database to
a location in a temporary directory and not over the original database
directly. However, we then proceed to move this file directly from the
temporary directory to our final location, which is more than likely a
cross-filesystem move (/tmp on tmpfs) and thus non-atomic.
Instead, zip the file to the same directory, prefixing the filename with
'.tmp.'. We then move the file into place. This move is guaranteed to be
atomic, so any reader of the database file will get either the old
version, the new version, or ENOENT.
We also perform a hardlink if possible instead of a move when shifting
the old database out of the way to '.old'; this ensures there is no
chance of a database file not existing during the whole process.
Only one small race condition should now be present- when the database
has been fully moved into place and the signature has not, you may see a
mismatch. There seems to be no good way to address this, and it existed
before this patch.
A final note- if someone had locked-down permissions on the directory
that the database files are in (e.g., could only write to foo.db.tar.gz,
foo.db, foo.db.tar.gz.old, foo.db.old, and the lock file), this would
break.
Signed-off-by: Dan McGee <dan@archlinux.org>
Given our semi-frequent use of pushd/popd, if we are in any directory
but the original and the database path given was relative, we won't
unlock the database file when cleaning up after an error.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Add last-minute changes to NEWS
* Don't treat '_' or '_n' special in scripts when finding translatable
strings; this breaks with one use of `read` and a dummy _ variable
Signed-off-by: Dan McGee <dan@archlinux.org>
This applies to pkgver, pkgrel, and epoch and ensures that any trailing
whitespace outside of the context of the variable declaration itself is
properly trimmed. The Bash parser will ignore this, and so should we.
We don't need to worry about leading space because it would force a
syntax error, or fail validation.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Bump the version, update the translation template files, and fill in
NEWS with relevant commits and changes since 4.0.0.
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevent bsdtar from exploding when install= or changelog= are
present without a value.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Detached sgnature files with extension .sign are accepted by gnupg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The default is supposidely 30 seconds from the gpg manpage, but that
sure wasn't what I was seeing- it was somewhere closer to two minutes of
silence. Add a more reasonable 10 second timeout value which should be
good enough for any keyserver that doesn't totally stink at it's job.
Signed-off-by: Dan McGee <dan@archlinux.org>
Replace "/tmp" with "${TMPDIR:-/tmp}" to allow for overriding the
hardcoded path.
Since we only use "/tmp" in conjunction with mktemp(1), we could also
have used "--tmpdir", which is GNU-ish, however (and the BSD counterpart
"-t" has been deprecated in GNU mktemp).
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This includes some fixes to the messages that are displayed when a
signal is caught in makepkg or repo-add:
* Instead of always showing "==> ERROR: TERM signal caught. Exiting...",
replace "TERM" by whatever signal is actually caught.
* Fix a typo in the SIGERR error message in repo-add ("occurred" instead
of "occured"). Francois already fixed this for makepkg in 1e51b81c.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
There is a small chance that a user sends SIGINT (or any other signal
that is trapped) when we're already in clean_up() which used to lead to
trap_exit() being executed and the remaining code in clean_up() being
skipped due to the bash signal/trap handler blocking EXIT (since its
handler is already being executed, even if it's interrupted).
In practice, this behaviour caused unexpected results (primarily because
pressing ^C at the wrong time left a lock file behind):
$ ./repo-add extra.db.tar.gz foobar
==> Extracting database to a temporary location...
^C
==> ERROR: Aborted by user! Exiting...
$ ./repo-add extra.db.tar.gz foobar
==> Extracting database to a temporary location...
==> ERROR: File 'foobar' not found.
==> No packages modified, nothing to do.
^C
==> ERROR: Aborted by user! Exiting...
$ ./repo-add extra.db.tar.gz foobar
==> ERROR: Failed to acquire lockfile: extra.db.tar.gz.lck.
==> ERROR: Held by process 18522
Fix this and reduce the chance of race conditions in signal handlers by:
* Unhooking all traps in both clean_up() and trap_exit().
* Call clean_up() explicitly in trap_exit() to make sure we remove the
lock file and the temporary directory even if we send SIGINT when
clean_up() is already being executed but didn't reach the unhook code
yet.
Also, add an optional parameter to clean_up() to allow for setting an
explicit exit code when we call clean_up() from trap_exit().
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
We have a few incomplete translations, but these should be addressable
before the 4.0.1 maint release that is surely not that far in the
future.
Signed-off-by: Dan McGee <dan@archlinux.org>
Inline comments after pkgver or pkgrel would cause the sanity
checks to fail so remove them before checking the value.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows it to serve double-duty. In order to allow users to base
verification decisions off of both a valid signature and a trusted
signature, we need to assign some level of owner trust to the keys we
designate as trusted on import.
Signed-off-by: Dan McGee <dan@archlinux.org>
* --import now only imports keys from pubkey.gpg and does not import
owner trust; if you want to have both simply run the operations in
sequence.
* --import-trustdb has been simplified; it will overwrite existing
values in the trust database as before, but there is no need to export
it first as those values are safe if left untouched.
* Fix the manpage referring to a non-existent option.
Signed-off-by: Dan McGee <dan@archlinux.org>
If PKGEXT is not one of the recognized tar*'s, create_package() would
create an empty package file and fail, since bsdtar on the left side of
the pipe returns 141 on SIGPIPE (broken pipe).
This patch changes the behavior for an invalid PKGEXT. A warning is
printed on stderr, and a tar file is created. Also retire the obsolete
$EXT variable.
Add the obligatory comment why we don't use bsdtar's compression.
Finally, fix mixed-tab-space indentation.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
We're ill equipped to be using this flag as we don't trap and respond to
the ERR signal. The result is that if is ever tripped, pacman-key will
instantly exit with no indication of why. At the same time, we're
already fairly good about doing our own error checking and verbalizing
it before dying.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents the error trap being set off when GPGDir is commented
in pacman.conf. Bug introduced in 507b01b9.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Always quote the right-hand side of expression when the == or != operator
is used, unless intended as a pattern.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
Always quote the righthand side of expression when the == or != operator
is used, unless intended as a pattern. Quoting bash(1):
When the == and != operators are used, the string to the right of the
operator is considered a pattern. Any part of the pattern may be quoted
to force it to be matched as a string.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
If '-' isn't the last item, it's interpreted as a range and not
literally, causing problematic behavior in parsing optdepends.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Keep the non-zero return val to let the caller know that the key wasn't
found.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Many PKGBUILDs use formatting whitespace when specifying optdepends.
This is removed when adding a package to a repo-database so the
output of "pacman -Si <package>" and "pacman -Qip <package file>"
becomes inconsistent. Instead, do the adjustment when creating
the .PKGINFO file.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allow the specification of versioned optdepends with an epoch.
This also (partially) enforces a whitespace between ":" and the
description which is required for the future optdepends parsing
code.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
