Delta files will be used if the size is smaller than a percent
(MAX_DELTA_RATIO) of the package size.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow deltas and packages to share the md5sum checking code.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The code didn't match the following comment :
"A depends on B through n depends <=> A listed in B's requiredby n times"
It stopped at n=1 with a break.
I was surprised to see this case happens in real, that's how I noticed the
bug: wine depends on both freeglut and glut, while freeglut provides glut.
So when installing wine, the update_depends function listed wine twice in
freeglut's requiredby. But the compute_requiredby function (used when
installing freeglut, and used by testdb) listed wine only once in
freeglut's requiredby. That made testdb unhappy.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 4853a4aad9 used the tmpdir variable
for checking the existence of /bin/sh, without resetting it.
This caused /bin/sh to be deleted during the cleanup part, as soon as a scriptlet
other than pre_upgrade or pre_install was executed.
For example, on the first post_upgrade during a -Su.
I introduced two variables : clean_tmpdir and restore_cwd, for deciding what should
be done in the cleanup part.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This code assumed that DBPath was under RootDir, while this is not necessarily the case :
pacman doesn't enforce anymore than DBPath is under RootDir.
So now, all scriptlets will be put somewhere in RootDir/tmp/, so that when it chroots in RootDir,
the scriptlets are still available inside the chroot.
This also removes the need of normalizing both dbpath and rootdir, in order to do computation on the paths.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
We had way too much going on with the Doxygen manpage generation. Clean it
up quite a bit by removing directory manpages, using relative paths, not
having a manpage for every single alpm function, and ensuring internal
functions are not documented publicly.
Signed-off-by: Dan McGee <dan@archlinux.org>
Some of the error messages in _alpm_pkg_load failed to use the pkgname
value when printing, which made error messages rather hard to decode.
Signed-off-by: Dan McGee <dan@archlinux.org>
Change the default visibility of libalpm functions to internal instead of
hidden- this allows for slightly better optimization because it tells GCC
that the function can never be called outside of the current module (see
http://gcc.gnu.org/onlinedocs/gcc/Function-Attributes.html).
Also added some attributes to the pacman print functions so that they check
the format strings being passed to them.
Signed-off-by: Dan McGee <dan@archlinux.org>
If /bin/sh is missing in the root directory, scriptlets cannot be executed, as
we're explicitly calling it.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
The md5 routines are one of the chokepoints of libalpm (main chokepoint being
archive extraction). Although IO delay causes a lot of it, we can at least
inline some of the md5 stuff as we aren't that concerned about space and
eliminate quite a few function calls.
Signed-off-by: Dan McGee <dan@archlinux.org>
The code for setting the lastupdate file path still referenced both the
root and dbpath, when we should only be using dbpath. Fix it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Packages and DBs now support using the UNIX epoch (seconds since Jan 1, 1970)
for use in builddate and installdate. This will only affect newly built
packages. Old existing packages with the text format are still supported, but
this is deprecated.
In the case of removal of text time support, this code will fail gracefully,
returning the start of the epoch for broken packages.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
In most cases, we want to fully scan a package when we load it, which serves
as a integrity verification check. However, there are times when it is only
desired to read the metadata and nothing else, so allow the caller of pkg_load
to choose the behavior they need.
This pays big dividends in speeding up pacman cache cleaning functionality.
Old (729 packages):
real 1m43.717s
user 1m20.785s
sys 0m2.993s
New (729 packages):
real 0m25.607s
user 0m19.389s
sys 0m0.543s
Signed-off-by: Dan McGee <dan@archlinux.org>
pacman/callback.c already did the work I set out to do with this commit, so
update the comments accordingly in the frontend and backend.
Signed-off-by: Dan McGee <dan@archlinux.org>
Previously, package names must match a specified scheme or they will cause
pacman add operations to fail. This is not a very intelligent or necessary
way to act, so remove the dependency on the name of the package to be
installed and read all relevant information from the metadata instead.
This does have one causality to be addressed later- pacman cache cleaning
functionality, which has never been phenomenal, just lost most capability.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add some alpm functions for getting optdepends, have makepkg include them
in the PKGINFO file, and have a pacman -Qi operation display the raw string
as stored by libalpm.
Signed-off-by: Dan McGee <dan@archlinux.org>
As seen with the recent upgrade of pacman and the removal of the
pacman.d/current mirrorlist, files that were formerly in the backup array
get deleted upon their removal, which could be dangerous. Instead, we should
use the combined backup array of the old and new package. This fix should
address this issue in a relatively straightforward way.
In addition, old files should be moved to pacsave locations as expected.
Signed-off-by: Dan McGee <dan@archlinux.org>
installdate should never be present in a package descfile, so get rid of it.
With the last commit, we also don't need the util strtoupper function.
Signed-off-by: Dan McGee <dan@archlinux.org>
This fix FS#8081. The tr_TR locale has known issue with case insensitive
comparisons, mostly because upper(i) != I.
So the .PKGINFO files generated by makepkg MUST contain all keywords in lowercases now.
This was already done, but was not mandatory.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
The mistake fixed in commit 26441cf65c
was actually done at two places.
This fix the second one.
Also remove one unnecessary newline introduced by
commit d34b2c4ed8
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
When calling a function of the alpm_option_get_* group, you get a segfault
if you don't call alpm_initialize() first. With this patch those functions
set pm_errno to PM_ERR_HANDLE_NULL and return an error value if handle ==
NULL.
(Dan: modified to meet pacman coding standards)
Signed-off-by: Stefano Esposito <stefano.esposito87@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
My two previous hacks related to this part
(8038190c7c and
b15a5194d1) were caused by the lack of
understanding of a feature introduced a while ago:
Better control over CTRL-C interruptions -- do not leave the DB in an
inconsistent state (54008798ef).
Now I have been looking at this commit, and the added feature is indeed
interesting. The main problem I had with it is that it does a rather
unusual use of alpm_trans_release, which caused a few problems that I tried
to fix in a weird way. I think these problems were caused by the fact that
there weren't any difference between "interrupt transaction" and "release a
transaction which failed" actions from the alpm_trans_release POV. So I
decided to add a new function instead, alpm_trans_interrupt, which is
called on Ctrl+C, and which only sets trans->state to STATE_INTERRUPTED so
that remove_commit and add_commit can exit cleanly at a safe moment. This
allowed me to revert my two previous hacks as well.
Also ensure we handle SIGINT correctly in all cases- if a transaction is
not ongoing, then we can free the transaction and exit quickly.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This reverts commit dfc85cb5f5
and b6f3fe6957.
This DB check is already in testdb (among others).
Also testdb now uses the db path set at make time by default,
so specifying the db path is optional.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
I'm currently working on python bindings for alpm written in pyrex. While
working i found that declaring alpm_strerror as
char * alpm_strerror (void)
instead of
char * alpm_strerror (int err)
and then using pm_errno in the implementation instead of err, could make it
more bindings-friendly.
Dan: cleaned up and added void to declaration. Instead of replacing existing
function, add a new function called 'alpm_strerrorlast(void)'.
Signed-off-by: Stefano Esposito <stefano.esposito87@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
One string in de.po differed pretty strongly with its translated version.
It may still be totally wrong as far as translations go, but it compiles
now. Get translater to check.
Also, ensure the proper dbpath gets set in the db when it's created.
Signed-off-by: Travis Willard <travis@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Suppose a package foo depends on foo1, foo2, ..., foon.
Doing pacman -Rc foo1 foo2 ... foon added foo n times to the removal list,
because what checkdeps return is something like :
foo1 is requiredby foo
foo2 is requiredby foo
...
foon is requiredby foo
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Introduce two new methods into the API - alpm_db_register_sync and
alpm_db_register_local, which replace the functionality of
alpm_db_register. db_register_local always returns the local DB, and
db_register_sync will always try to register a sync DB. This conceptually
separates the local DB from sync DBs in the code. Also updated the pacman
frontend to use the new functions. In addition, this changes the location
of all sync DBs in the filesystem from $DBPATH/$REPO to $DBPATH/sync/$REPO,
This removes the silly limitation that a sync DB couldn't be named 'local',
along with structurally separating sync DBs and the local DB in the
filesystem.
Signed-off-by: Travis Willard <travis@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to remove the hack in the frontend where we added a newline
to everything coming out of the pm_printf functions, and instead let the
developer put newlines where they want them. This should be the last hangover
of that auto-newline stuff.
Signed-off-by: Dan McGee <dan@archlinux.org>
As reported by JGC in FS #7652, the check for EACCES is not exactly correct.
We need to check for the ETXTBSY error as well. This is necessary on FreeBSD.
Signed-off-by: Dan McGee <dan@archlinux.org>
A bunch of changes related to my first "real" install of pacman-git into
/usr/local and trying to use it.
* Shift some uses of free -> FREE in libalpm.
* Move stat and sanity checks of config paths into libalpm from the
config and argument parsing in pacman.c.
* Fix issue where dbpath still was not defined early enough due to its
requirement for being used in alpm_db_register. This should be rewritten
so it doesn't have this dependency, but this will work for now.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch cleans up and fix the _alpm_trans_update_depends function
and ensure that all requiredby fields are filled in case of multiple satisfiers
(previously, the handling of mutliple satisfiers in that function was inconsistent).
This makes a special case handling of requiredby in commit_single_pkg() obsolete,
and so allows cleaning that code as well.
Also fixed upgrade056 pactest because :
1) the requiredby fields were wrong, and this wouldn't happen with the fixed _alpm_trans_update_depends().
2) this is a very unusual case anyway (and handling all corner cases combined to a broken database
seems nearly impossible to achieve).
References :
http://www.archlinux.org/pipermail/pacman-dev/2007-July/008919.htmlhttp://www.archlinux.org/pipermail/pacman-dev/2007-July/008920.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
In order to best resolve bug 6404, move some cachedir handling stuff out of
sync.c and into util.c and create two new functions: filecache_find and
filecache_setup. sync.c was rewritten to use these, and alpm_fetch_pkgurl
now also uses these routines.
Signed-off-by: Dan McGee <dan@archlinux.org>
In my opinion, a commiting transaction that failed isn't equivalent
to a prepared transaction.
Some things could have been done in the meantime.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
* Move alpm md5 functions to lib/libalpm/util.c
* Remove unneeded includes for md5.h
* Replace md5 implementation with one from http://www.xyssl.org
Dan: clean up XySSL code by removing parts we don't use, and add a note
saying what changed.
Dan: fix alpm_get_md5sum, off by one error on the malloc call and other
small things.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
There's no need for a second hashing algorithm. MD5 serves the purpose
of verifying that a package file hasn't been corrupted during download.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
This basically moves the code from alpm_release, which was mostly about
unregistering all databases, to a safer alpm_db_unregister_all.
This allows to avoid modifying the dbs_sync list while iterating over it,
and and also prevent alpm_release from looping infinitely when a database
can't be unregistered.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This prevents alpm_release to loop infinitely in case of
an interrupted transaction, where the database wasn't
unregistered.
alpm_release should probably also be fixed, as it can
still loop if db_unregister fails for another reason.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
We were using a void *data element in pmpkg_t before, which is unsafe by its
nature of being untyped. Reimplement data as origin_data being a union that
can hold either a path to a package file or a pointer to a cache database,
and make the other necesary updates in the code to reflect this. See package.h
for details.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove the commented desc_localized stuff, we can find it later in version
control. Also remove some unnecessary includes of the stat header and
use -fstack-protector-all which is a bit more broad.
Signed-off-by: Dan McGee <dan@archlinux.org>
A side effect of the previous commit ( ea9a756eea )
is that it's now possible to use versioned conflicts.
Add two new conflict pactests for showing it.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
I didn't like the patch proposed by Nagy for the sync1002 pactest here:
http://www.archlinux.org/pipermail/pacman-dev/2007-July/008971.html
So here is another attempt of fixing it.
In case of the DEPENDSONLY flag :
1) pass an empty list to resolvedeps instead of the list of targets
2) empty the trans->packages targets list before adding the resolved deps.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
That function wasn't big, but this might be useful
for later refactoring of the search for satisfier code.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The _alpm_sortbydeps function has two main part :
1) initialization of the graph structure
2) the sorting itself
So it didn't seem bad to move the first part to a second function.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
.gitignore works recursively, so we don't need Makefile and Makefile.in
in all of the subdirectory .gitignore files.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a full refactoring of _alpm_add_commit into multiple functions and a
better layout for later. Some highlights:
* No regressions in pactest performance.
* Much cleaner layout. add_commit is split into four functions:
upgrade_remove, extract_single_file, commit_single_pkg, _alpm_add_commit
* No more super-functions, the heaviest (extract_single_file) is finally
under 400 lines, with much improved commenting as well.
* Incorporation of Andrew Fyfe's ideas for fixing FS #7484. Try to handle
all possible cases of extraction combinations with files, symlinks, dirs,
and non-existant entries on the filesystem. This should make our dealings
with libarchive fall more into our control.
Signed-off-by: Dan McGee <dan@archlinux.org>
This replaces the former -D operation that was undocumented and rather
hacky. It can be used with add, upgrade, or sync transactions and will affect
all packages installed. Should close FS #7193.
Also tell makepkg to use this new flag.
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes the failure of the requiredby004 pactest in a not so pretty way,
but it gets the job done. I purposely used the extremely long name of
PM_TRANS_TYPE_REMOVEUPGRADE to be both clear and in the hope that someone
else will figure out a better solution.
Original idea from Nagy Gabor, patch updated and cleaned for current code.
Signed-off-by: Dan McGee <dan@archlinux.org>
remove _alpm_ldconfig call from _alpm_sync_commit,
since sync operation causes an upgrade transaction,
where ldconfig is already run.
Reference:
http://www.archlinux.org/pipermail/pacman-dev/2007-April/008132.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
In 1c9f30b9fa
This change should be done AFTER the TODO in recursedeps is implemented.
Then we'll be able to first sort the list, then call recursedeps which keeps
it sorted. For now, the sorting should still be done as the last step.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Patch from Nagy that makes removedeps use alpm_depcmp.
I also renamed removedeps to recursedeps, as it can have
a more general usage, and added an include_explicit argument,
so we can control if packages explictly installed are added or not.
Note: Small changes made by me (Dan) as well- mostly some English grammar
correction and a few other cleanups.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently the d (nodeps) option skips the s (recursive) part,
rendering the Rsd combination totally useless.
This patch makes a recursive removal still possible using the nodeps option,
as Romashka asked there :
http://bugs.archlinux.org/task/6057#comment17784
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Remove versioncmp.c by moving all functions to locations that make sense.
Move replacement functions (for building without glibc) into util.c where
they belong, and do proper checks for them instead of using __sun__, etc.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove unused buildtype field from pmpkg_t struct and anything associated
with it, as it is unused at the moment. If we need to readd it, it is an
easy revert of this commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
The three chk_ functions overlap for packages both in targets and in the
database. This caused the same conflict to be found in both direction
(A conflicts with B, and B conflicts with A).
This patch avoids this duplication. which shouldn't be needed, but other
changes might be required for that to work correctly.
This also has the unexpected side effect to hide the failure of sync022
pactest, for FS #7415. That's maybe not a good thing though..
Note from Dan: sync022 does succeed, but a sync023 pactest added to check
regressions also seems to pass. This may be a valid fix to this 'problem'
sync022 was meant to find.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Because of this commit:
ea1fef69ad
we lost a lot of gettext-ized messages on the libalpm side. Remove them
in order to clean out these files a bit.
Signed-off-by: Dan McGee <dan@archlinux.org>
There is no real reason to burden our translators with these messages, as
anyone helping to debug these will probably want them in English.
Signed-off-by: Dan McGee <dan@archlinux.org>
We shouldn't translate log messages to pacman.log so it is consistant and
can be parsed by other tools. Remove all gettext _() around these strings.
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the translations from src/pacman/po to just po/ so we can include the
scripts gettext translations in the same message catalog as that of the
pacman frontend. The libalpm message catalog, for now, will remain a separate
existence.
Signed-off-by: Dan McGee <dan@archlinux.org>
I ran flawfinder and sparse over the pacman source code and found a few
things that were worth fixing (and were quick fixes).
Signed-off-by: Dan McGee <dan@archlinux.org>
Adds the ARCHIVE_EXTRACT_NO_OVERWRITE libarchive flags
for extracting files and directories.
This will prevent symlinks for being overwritten by directories.
All other files that need to be extracted should already have
been deleted previously by pacman.
This flag is not used for extracting files in backup array
to /tmp/alpm_XXXX, because this file is created by mkstemp first,
and so needs to be overwritten by the file from the archive.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
With libarchive 2.2.3 (previously 1.3.1), archive_read_extract now returns ARCHIVE_WARN
when a package is extracted as user, because for example, UID=0 or SUID bit can't be set.
This patch makes pacman not treating these warnings as errors anymore,
but simply ignoring them.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
I previously introduced some patches to make just about every path in
pacman/libalpm configurable; doing this with the lockfile seemed a bit too
far and we really should just place the lockfile where it belongs- with the
DB that needs locking.
More details in this thread:
http://archlinux.org/pipermail/pacman-dev/2007-June/008499.html
Signed-off-by: Dan McGee <dan@archlinux.org>
The scriptlet calling had some unneeded complexity for the time being
which we aren't using here. Let's get rid of it until we find a good way
to implement it correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
First reported here:
http://bbs.archlinux.org/viewtopic.php?pid=261861
Newly created files were done with the standard umask, so those that are
extracted seperately and copied to a .pacnew extension will have the wrong
permissions. This should hopefully fix this.
Signed-off-by: Dan McGee <dan@archlinux.org>
The alpm_splitdep function formerly overwrote the input string, causing
a few issues. Fix this.
Signed-off-by: Nagy Gabor <ngaba@petra.hos.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
For future possibilities, don't extract any files that start with '.'.
This will allow us to add features such as the ChangeLog viewing without
having to wait to include these files in packages, because older versions
of pacman will be forward compatable with 'hidden' files at the root level
of the package.
Signed-off-by: Dan McGee <dan@archlinux.org>
This was a bad way to fix a problem upstream. Doing this resulted in
symlink permissions being applied to files installed on the system, leaving
some binaries with 77 permission, etc.
This reverts commit 4e6b7c1cde.
This function is an absolute disaster, so we'll take it one step at a time
here. This was a quick once-over of the whole thing, trying to straighten
out some of the spaghetti code and fix some mistakes that others found.
We are now down to two failing pactests again: sync300 and upgrade051.
Signed-off-by: Dan McGee <dan@archlinux.org>
This should hopefully allow multiple cache dirs to be specified in
pacman.conf and/or on the command line, and allow pacman to test
each one for the package file. The first one found to be writeable is
used as the download cache.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Readd default logmask of ERROR and WARNING
* Remove DOWNLOAD log level as it no longer applies
* Add 'no targets' logic back in where it applies
* Switch some prints in parseconfig to ERROR
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove the logmask functionality from the backend as it has been moved to
the frontend, and change the logging callback function to use pm_printf.
In addition, make much better use of va_list- use the args list instead
of a arbitrarily chosen string to print to in the logging functions.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add some 'const' keywords all over the code to make it a bit more strict on
what you can and can't do with data. This is especially important when we
return pointers to the pacman frontend- ideally this would always be
untouchable data.
Signed-off-by: Dan McGee <dan@archlinux.org>
'inline' keyword in C99 is not correctly recognized, so compilation fails on
the warning it spits. This fixes this.
Signed-off-by: Dan McGee <dan@archlinux.org>
The db variable was left unset when calling alpm_db_register, leading
to a failure to ever register a sync db. Also added a check to ensure
DBPath was set when trying to register a database.
Signed-off-by: Dan McGee <dan@archlinux.org>
Switch over to the new frontend parseconfig.
* Fix a few issues in parseconfig
* Remove unused callback upon database registration
* Remove conf file related errors from error.c/alpm.h
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm.h is the only "publically viewable" file, so there is no reason to have
functions in alpm.c that belong in package.c, db.c, etc. Move the functions
where they belong and leave only the library init functions in alpm.c.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Add vim modeline to Makefile.am and configure.ac
* Fix white space in Makefile.am and configure.ac
* Add contrib/wget-xdelta.sh to EXTRA_DIST in Makefile.am
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove any use of the former path variables defined by the Makefiles or
config.h. These are now runtime configurable only with pacman.conf (or by
using flags on the command line).
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the defaults for RootDir, CacheDir, DBPath, and LockFile into
pacman.conf, just as LogFile was done before. Add a section to
alpm_parse_config to look for a LockFile directive.
Signed-off-by: Dan McGee <dan@archlinux.org>
This code depends on /etc/mtab existance, which is not very reliable in all
cases, especially in a chroot or non-Linux environment. Dump it for now
until we can find a better way.
Signed-off-by: Dan McGee <dan@archlinux.org>
Also cleaned up some duplicate printf lines related to the ShowSize option.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This change allows us to use all autoconf specified paths, most notably
$(localstatedir). It is quite a change and touches a lot of files, as
all references to the DB and cache were done with the ROOTDIR as a prefix.
* add --lock command-line option to pacman to specify the location of the
lockfile (this can now be specified at configure time by setting the
$localstatedir path).
* Rip quite a few settings out of configure.ac as they are now picked by
setting the paths during configure or make.
* Fix bug with /tmp fallback for sync downloads not working correctly
(related to root location, now the system tmp dir is used).
* Simplified the parameters to some libalpm functions, and added get/set
for the new lockfile option.
* Renamed several of the DEFS to names without the PM_ prefix.
Signed-off-by: Dan McGee <dan@archlinux.org>
Small change (addition of a 'strreplace' function) which replaces
any $repo tokens found in a server line with the name of the repo
or section being processed.
While this is more simplistic than suggestions on flyspray, it works
and I think it is cleaner. Merits can be discussed further.
Ref: FS#6389
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Reorder package version checking so there is no output when a
package is listed in IgnorePkg.
Closes FS#7111
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Fix for FS#7133 - when DB scanning finds an invalid named entry,
scanning is currently aborted. Instead we will simply skip it
and find the next valid package.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Simple clean up for the rest of the code, which also prevents a little
libdownload bug relating to '//' appearing in URLs.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Hackish fix to ensure libarchive extracts files and dirs with the right
permissions. For some reason extracting /tmp on install wasn't handled properly
by librachive, so an explicit chmod will fix this.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
The old function did too much on its own; let alpm_depcmp do the hard
work. This will allow for future versioned provisions if necessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
We had many unnecessary casts, most of them dealing with malloc and
other memory allocations. The variable type should take care of it;
no need to do it explicitly. In addition, I caught a const error while
removing the casts.
Signed-off-by: Dan McGee <dan@archlinux.org>
Allow IgnorePkg (or --ignore) to work for _either_ side of a
replacement. For example, if 'foo' is set to replace 'bar',
ignoring either package will skip this replacement.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
* Remove some unnecessary conditional compiling in util.h- move the
functions tha required it to trans.c (along with a bunch of new header
includes).
* Clean up util.h a bit- remove some header includes, remove universal
libarchive include and only put it in the files that need it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove inclusion of libintl.h from all files, because we can do it once
in util.c where the _() macro is defined.
Signed-off-by: Dan McGee <dan@archlinux.org>
Somehow missed this earlier when changing everything to types.
unsigned short -> pmloglevel_t wherever necessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
Unification and cleanup of the add.c and remove.c code. It looks remarkably
similar, so this may be a candidate for functionalization at a later time.
Signed-off-by: Dan McGee <dan@archlinux.org>
In order to get more reliable message statistics, I updated all of the
po files by first doing a make *.pot-update followed by a make. I am
holding off on committing the pot files as this causes issues with make
constantly wanting to rebuild them.
Signed-off-by: Dan McGee <dan@archlinux.org>
Several important paths, file locations, and extensions were #define-d in the
source code instead of being configurable. This moves all of these to
the configure script where they can be picked upon running ./configure. We
may later want to make some of these even more visible and move them to
pacman.conf.
Signed-off-by: Dan McGee <dan@archlinux.org>
We haven't done a whole lot with Doxygen so far, so this updates some of the
things that have changed a lot- namely, the now public exposure of alpm_list.
All functions in this file have now been Doxygen commented, and a few other
things in alpm.c were fixed as well. In addition, the Doxygen config file
was updated.
Signed-off-by: Dan McGee <dan@archlinux.org>
* --ignore was being ignored (haha) on sysupgrade when a package was listed
as being a force upgrade. This adds a prompt to the user in this case asking
what to do.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Move all .cvsignore files to .gitignore for switch in VCS. In addition,
delete ones that were unnecessary because they only contained Makefile
and Makefile.am.
Signed-off-by: Dan McGee <dan@archlinux.org>
work of fixing these in the translation files, and I removed a few fuzzys
while doing so. If any more patches for translations come, try to do it
against these files.
* Ran msgmerge on all po files from new pot files, but did not check in the
updated pot files as that just causes problems.
* Updated Italian translation
Giovanni Scafora <linuxmania@gmail.com>
* Updated Russian translation, added libalpm partial translation
Владимир Байраковский <4rayven@gmail.com>
* Updated Hungarian translation
Nagy Gabor <ngaba@petra.hos.u-szeged.hu>
* Updated French translation
solsTiCe d'Hiver <solstice.dhiver@laposte.net>
Thanks again guys!
* More significant error messages when -Qo fails
* Potential fix for reported error that pacman indicates corrupt packages
when space is full on the cache dir
