If we are missing a local database file, we get repeated messages over
and over telling us the same thing, rather than being sane and erroring
only once. This package adds an INFRQ_ERROR level that is added to the
mask if we encounter any errors on a local_db_read() operation, and
short circuits future calls if found in the value. This fixes FS#25313.
Note that this does not make any behavior changes other than suppressing
error messages and repeated code calls to failure cases; we still have
more to do in the "local database is hosed" department.
Also make a small update to the wrong but unused flags set in
be_package; using INFRQ_ALL there was not totally correct.
Signed-off-by: Dan McGee <dan@archlinux.org>
We did a good job checking this in add.c, but not necessarily anywhere
else. Fix this up by adding checks into dload.c, remove.c, and conf.c in
the frontend. Also add loggers where appropriate and make the message
syntax more consistent.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't write with extra or unknown whitespace, so there is little
reason for us to trim it when reading either. This also fixes the
hopefully never encountered "paths that start or end with spaces" issue,
for which two pactests have been added. The tests also contain other
evil characters that we have encountered before and handle just fine,
but it doesn't hurt to ensure we don't break such support in the future.
Signed-off-by: Dan McGee <dan@archlinux.org>
This ensures we are actually making correct use of the information gpgme
is returning to us. Marginal being allowed was obvious before, but
Unknown should deal with trust level, and not the presence or lack
thereof of a public key to validate the signature with.
Return status and validity information in two separate values so check
methods and the frontend can use them independently. For now, we treat
expired keys as valid, while expired signatures are invalid.
Signed-off-by: Dan McGee <dan@archlinux.org>
Immediately jump to the cleanup code after setting the return code to -1
in case rename() fails. Otherwise, it will be reset to 0 right after we
leave the if branch.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This accomplishes quite a few things with one rather invasive change.
1. Iteration is much more performant, due to a reduction in pointer
chasing and linear item access.
2. Data structures are smaller- we no longer have the overhead of the
linked list as the file struts are now laid out consecutively in
memory.
3. Memory allocation has been massively reworked. Before, we would
allocate three different pieces of memory per file item- the list
struct, the file struct, and the copied filename. What this resulted
in was massive fragmentation of memory when loading filelists since
the memory allocator had to leave holes all over the place. The new
situation here now removes the need for any list item allocation;
allocates the file structs in contiguous memory (and reallocs as
necessary), leaving only the strings as individually allocated. Tests
using valgrind (massif) show some pretty significant memory
reductions on the worst case `pacman -Ql > /dev/null` (366387 files
on my machine):
Before:
Peak heap: 54,416,024 B
Useful heap: 36,840,692 B
Extra heap: 17,575,332 B
After:
Peak heap: 38,004,352 B
Useful heap: 28,101,347 B
Extra heap: 9,903,005 B
Several small helper methods have been introduced, including a list to
array conversion helper as well as a filelist merge sort that works
directly on arrays.
Signed-off-by: Dan McGee <dan@archlinux.org>
As noted by Allan, we failed pretty hard if gpgme was compiled out. With
these changes, only sign001.py fails. This can/will be fixed later once
we beef up the test suite with more signing tests anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
If we can't read the keyring, gpgme will output confusing debug
information and fail to verify the signature, so we should log some
debug information.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a wrapper function for access() which logs some debug
information and eases handling in case of split directory and filename.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses FS#25141. We shouldn't remove every empty directory we
come across during the removal process unless it is truly not known to
any other package. This will prevent removal of essential directories
such as '/var/lock/'.
This is accomplished by first checking the empty/non-empty status of a
directory, which was previously done implicitly by calling rmdir() and
ignoring errors. We do this to avoid the next (new) check in most cases,
which is to look at all local packages to see if the to-be-removed
directory is present in another packages' filelist. If we do not find it
anywhere, then we remove it, else we keep the file around.
The pactest has been updated to test more cases, as well as finding a
flaw in the original expected to fail case- we need separate DIR and
FILE based EXIST rules.
Signed-off-by: Dan McGee <dan@archlinux.org>
This can only ever operate on the local database, and a local package at
that. Change the function signature to take a handle and package object,
add the relevant asserts, and ensure the frontend can detect the package
not found condition when finding packages to pass to this method.
Signed-off-by: Dan McGee <dan@archlinux.org>
The bulk of this commit is adding new tests to ensure the new behavior
works without disrupting old behavior. This is a relatively sane maneuver
when a package adds a conf file (e.g. '/etc/mercurial/hgrc') that was
not previously in the package, but it is placed in the backup array. In
essence, we can treat the existing file as having always been a part of
the package and do our normal compare/install as pacnew logic checks.
Signed-off-by: Dan McGee <dan@archlinux.org>
This code duplication has always been a rather clumsy casuality of
fixing some past upgrade issues. Unify the removal code across upgrade
and remove operations into a new _alpm_remove_single_package() method
wihch makes it very clear how we handle upgrade and remove differently,
via several conditionals on newpkg.
This commit highlights interesting behavior such as the fact that the
implicit removal in every package upgrade never gets transaction events
or progress callbacks.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes "error: no previous prototype for '_alpm_raw_cmp'
[-Werror=missing-prototypes]" warnings, and also prevents someone from
getting the prototypes and functions out of sync.
Signed-off-by: Dan McGee <dan@archlinux.org>
Restore some sanity to the number of arguments passed to _alpm_download
and curl_download_internal.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This means creating a new struct which can pass more descriptive data
from the back end sync functions to the downloader. In particular, we're
interested in the download size read from the sync DB. When the remote
server reports a size larger than this (via a content-length header),
abort the transfer.
In cases where the size is unknown, we set a hard upper limit of:
* 25MiB for a sync DB
* 16KiB for a signature
For reference, 25MiB is more than twice the size of all of the current
binary repos (with files) combined, and 16KiB is a truly gargantuan
signature.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
URLs might end with a slash and follow redirects, or could be a
generated by a script such as /getpkg.php?id=12345. In both cases, we
may have a better filename that we can write to, taken from either
content-disposition header, or the effective URL.
Specific to the first case, we write to a temporary file of the format
'alpmtmp.XXXXXX', where XXXXXX is randomized by mkstemp(3). Since this
is a randomly generated file, we cannot support resuming and the file is
unlinked in the event of an interrupt.
We also run into the possibility of changing out the filename from under
alpm on a -U operation, so callers of _alpm_download can optionally pass
a pointer to a *char to be filled in by curl_download_internal with the
actual filename we wrote to. Any sync operation will pass a NULL pointer
here, as we rely on specific names for packages from a mirror.
Fixes FS#22645.
Signed-off-by: Dave Reisner <d@falconindy.com>
The supposed safety blanket of this function is better handled by
explicit length checking and usages of strlen() on known NULL-terminated
strings rather than hoping things fit in a buffer. We also have no need
to fully fill a PATH_MAX length variable with NULLs every time as long
as a single terminating byte is there. Remove usages of it by using
strcpy() or memcpy() as appropriate, after doing length checks via
strlen().
Signed-off-by: Dan McGee <dan@archlinux.org>
We can readily detect the first node in a list by checking if
node->prev->next is NULL. So there is no need to pass the head
of the list to this function and its prototype now looks like
all the other item accessors.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The only thing this accessor did was remove the const qualifier
given our entire list implementation requires passing around the
head anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
They are placeholders, but important for things like trying to re-sync a
database missing a signature. By using the alpm_db_validity() method at
the right time, a client can take the appropriate action with these
invalid databases as necessary.
In pacman's case, we disallow just about anything that involves looking
at a sync database outside of an '-Sy' operation (although we do check
the validity immediately after). A few operations are still permitted-
'-Q' ops that don't touch sync databases as well as '-R'.
Signed-off-by: Dan McGee <dan@archlinux.org>
Show output in -Qip for each package signature, which includes the UID
string from the key ("Joe User <joe@example.com>") and the validity of
said key. Example output:
Signatures : Valid signature from "Dan McGee <dpmcgee@gmail.com>"
Unknown signature from "<Key Unknown>"
Invalid signature from "Dan McGee <dpmcgee@gmail.com>"
Also add a backend alpm_sigresult_cleanup() function since memory
allocation took place on this object, and we need some way of freeing
it.
Signed-off-by: Dan McGee <dan@archlinux.org>
The error code is in fact a bitmask value of an error code and an error
source, so use the proper function to get only the relevant bits. For
the no error case, this shouldn't ever matter, but it bit me when I was
trying to compare the error code to other values and wondered why it
wasn't working, so set a good example.
Signed-off-by: Dan McGee <dan@archlinux.org>
This gives us more granularity than the former Never/Optional/Always
trifecta. The frontend still uses these values temporarily but that will
be changed in a future patch.
* Use 'siglevel' consistenly in method names, 'level' as variable name
* The level becomes an enum bitmask value for flexibility
* Signature check methods now return a array of status codes rather than
a simple integer success/failure value. This allows callers to
determine whether things such as an unknown signature are valid.
* Specific signature error codes mostly disappear in favor of the above
returned status code; pm_errno is now set only to PKG_INVALID_SIG or
DB_INVALID_SIG as appropriate.
Signed-off-by: Dan McGee <dan@archlinux.org>
Now that the filelists capture mode and size information, we can read
the data from there and prevent having to loop through and uncompress
every archive to check required diskspace usage.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to capture size and mode data when building filelists
from package files. Future patches will take advantage of this newly
available information, and frontends can use it as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
This saves replicating the potentially large list of files in a package
that is being removed.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We passed in 'line', but not 'buf.line'. In addition, the macros
building off of READ_NEXT() assume variable names anyway. Since we only
use these macros in one function, might as well simplify them.
Signed-off-by: Dan McGee <dan@archlinux.org>
Change the check into a loop over all signatures present and returned by
GPGME. Also modify the return values and checks slightly now that I know
a little bit more about what type of values are returned.
Signed-off-by: Dan McGee <dan@archlinux.org>
There is little need to expose the guts of this function even within the
library. Make it static in be_local.c, and clean up a few other things
since we know exactly where it is being called from:
* Remove unnecessary origin checks in _cache_get_*() methods- if you are
calling a cache method your package type will be correct.
* Remove sanity checks within local_db_read() itself- packages will
always have a name and version if they get this far, and the package
object will never be NULL either.
The one case calling this from outside the backend was in add.c, where
we forced a full load of a package before we duplicated it. Move this
concern elsewhere and have pkg_dup() always force a full package load
via a new force_load() function on the operations callback struct.
Signed-off-by: Dan McGee <dan@archlinux.org>
Some of these are legit (the backup hash NULL checks), while others are
either extemely unlikely or just impossible for the static code
analysis to prove, but are worth adding anyway because they have little
overhead.
Signed-off-by: Dan McGee <dan@archlinux.org>
Modifying prefix caused tmp directories to be left behind after
running scriptlets, and the path '/' to be passed to _alpm_rmrf. Broken
in f01c6f.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This avoids, probably among other things, leaving the lock file in place
after a SIGINT'd sync DB update.
Fixes regression introduced in 4f8ae2b.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The following function renames take place for the same reasoning as
the previous commit:
_alpm_grp_new -> _alpm_group_new
_alpm_grp_free -> _alpm_group_free
_alpm_db_free_grpcache -> _alpm_db_free_groupcache
_alpm_db_get_grpfromcache -> _alpm_db_get_groupfromcache
Signed-off-by: Allan McRae <allan@archlinux.org>
Using grp instead of group is a small saving at the cost of clarity.
Rename the following functions:
alpm_option_get_ignoregrps -> alpm_option_get_ignoregroups
alpm_option_add_ignoregrp -> alpm_option_add_ignoregroup
alpm_option_set_ignoregrps -> alpm_option_set_ignoregroups
alpm_option_remove_ignoregrp -> alpm_option_remove_ignoregroup
alpm_db_readgrp -> alpm_db_readgroup
alpm_db_get_grpcache -> alpm_db_get_groupcache
alpm_find_grp_pkgs -> alpm_find_group_pkgs
Signed-off-by: Allan McRae <allan@archlinux.org>
Only one of these looked like a real red flag, in find_requiredby(), but
it doesn't hurt to fix several of them up anyway.
Unfortunately, we can't turn this on universally due to things like the
sync(), remove(), etc. builtins which we often use as variable names.
Signed-off-by: Dan McGee <dan@archlinux.org>
We have just looped through the list of files, so might as well get
the count as we go.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses FS#24904. In a normal upgrade case, this replacement
seems to work just fine. However, when doing a sync "replace" type
upgrade, we weren't properly handling this edge case due to path
comparison not ignoring trailing slashes. Fix this by pruning any
trailing slashes past a certain point of file conflict resolution where
we no longer need them, which allows us to safely detect cases such as
now tested in the new pactest.
Signed-off-by: Dan McGee <dan@archlinux.org>
While researching the root cause of FS#24904, I couldn't help but clean
up some of the cruft in here. A few whitespace/line-wrapping issues, but
also fix shadowed variables and add some const where applicable.
Signed-off-by: Dan McGee <dan@archlinux.org>
We can reorganize things a bit to not require reading a directory-only
entry first (or at all). This was noticed while working on some pactest
improvements, but should be a good step forward anyway.
Also make _alpm_splitname() a bit more generic in where it stores the
data it parses.
Signed-off-by: Dan McGee <dan@archlinux.org>
Discovered this when doing some pactest rewrite work to generate
archives in memory only. If a sync database file or PKGINFO file is
missing a newline on the final line, the text from that line gets tossed
aside and never read into the package struct. This is pretty critical
when that last line is a depend or something.
Signed-off-by: Dan McGee <dan@archlinux.org>
These operate on the handle, and the state is stored on the handle, so
move them where they belong. Up until now only the transaction stuff
calls them, but this will soon change and alpm_db_update() will handle
locking all on its own.
Signed-off-by: Dan McGee <dan@archlinux.org>
Start by converting all of our flags to a 'status' bitmask (pkgcache
status, grpcache status). Add a new 'valid' flag as well. This will let
us keep track if the database itself has been marked valid in whatever
fashion.
For local databases at the moment we ensure there are no depends files;
for sync databases we ensure the PGP signature is valid if
required/requested. The loading of the pkgcache is prohibited if the
database is invalid.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is another step toward doing both local database validation
(ensuring we don't have depends files) and sync database validation (via
signatures if present) when the database is registered.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the ideal place to do it as all clients should be checking the
return value and ensuring there are no errors. This is similar to
pkg_load().
We also add an additional step of validation after we download a new
database; a subsequent '-y' operation can potentially invalidate the
original check at registration time.
Note that this implementation is still a bit naive; if a signature is
invalid it is currently impossible to refresh and re-download the file
without manually deleting it first. Similarly, if one downloads a
database and the check fails, the database object is still there and can
be used. These shortcomings will be addressed in a future commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
For the files count when loading from a package, we can keep a counter.
The two in the frontend were completely useless due to the fact that if
sync_dbs is non-NULL, alpm_list_count() will always be greater than 0.
Signed-off-by: Dan McGee <dan@archlinux.org>
This doesn't fix the real (bigger) problem of failing to parse sync
databases without directory entries, but it does prevent the parser from
segfaulting when the first desc file encountered did not have a
directory entry, among other conditions.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the first step at separating the pacman message catalog and the
scripts message catalog. Makefiles, configure.ac, and other such files
are adjusted accordingly, as well as renaming files. The TEXTDOMAIN of
scripts is also adjusted.
Note that no actual pot or po files get changed here; these will get
pruned in a future commit so each catalog contains only the necessary
messages.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is for the eventual 4.0.0 release, but more importantly to
logically separate new translations and strings from the PO split about
to happen between pacman and scripts.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to separate the name and hash elements in one place and
not scatter different parsing code all over the place, including both
the frontend and backend.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is an unfortunate chain of events. RET_ERR and RET_ERR_VOID will
eventually call CHECK_HANDLE, which resets the handle's pm_errno member.
Dan probably had a reason for doing this, so we merely switch the order
of operations in the RET_ERR macros to avoid stomping on our pm_errno.
Signed-off-by: Dave Reisner <d@falconindy.com>
* Check the return value of canonicalize_path() for non-NULL
* Use ASSERT and RET_ERR as appropriate
* Make remove_cachedir() use same path munge logic as add_cachedir()
Signed-off-by: Dan McGee <dan@archlinux.org>
Documented the _alpm_download() function in dload.c
Signed-off-by: Kerrick Staley <mail@kerrickstaley.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Added a line to the top of each of be_local.c, be_package.c, and
be_sync.c indicating their purposes.
Signed-off-by: Kerrick Staley <mail@kerrickstaley.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We were using copy_data before; this works for the struct itself but not
the strings contained within. Fix it up by duplicating all the data as
we do with our other structures.
Signed-off-by: Dan McGee <dan@archlinux.org>
Calling get_logcb() here would reset any previous setting of
handle->pm_errno due to the CHECK_HANDLE() macro contained within. This
would make error setting a bit funny if one set pm_errno before calling
_alpm_log(), such as in the RET_ERR() macro.
Signed-off-by: Dan McGee <dan@archlinux.org>
This removes the need to write accessor methods for every type we have,
and simplifies the API. Any type that doesn't need magic* can be
converted in this fashion to make it easier for frontend applications to
use, as well as make it less of a pain to introduce new such structs in
the future.
* "magic" meaning something like pmpkg_t where values can be lazy loaded.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is more in line with reality and what we have our makepkg, etc.
options named anyway.
Original-patch-by: Kerrick Staley <mail@kerrickstaley.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Don't name static methods with a gpgme_ prefix to avoid confusion with
methods provided by the library. These are static and local to our
file so just give them sane non-prefixed names.
* Rework sigsum_test_bit() to not require assignment.
* Don't balk if there is more than one signature available (for now,
only check the first).
* Fix error codes in publicly visible methods to return -1, not 0, if pkg
or db are not provided.
Signed-off-by: Dan McGee <dan@archlinux.org>
We didn't do due diligence before and ensure prior pm_errno values
weren't influencing what happened in further ALPM calls. I observed one
case of early setup code setting pm_errno to PM_ERR_WRONG_ARGS and that
flag persisting the entire time we were calling library code.
Add a new CHECK_HANDLE() macro that does two things: 1) ensures the
handle variable passed to it is non-NULL and 2) clears any existing
pm_errno flag set on the handle. This macro can replace many places we
used the ASSERT(handle != NULL, ...) pattern before.
Several other other places only need a simple 'set to zero' of the
pm_errno field.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Move several variables into better scope
* const-ify a few variables
* Avoid duplicating filelists if it is unnecessary
* Better handling out out of memory condition when adding file conflicts
to our list
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows callers to retrieve it from wherever is convenient, which
may or may not be on the package object itself.
Signed-off-by: Dan McGee <dan@archlinux.org>
This method is old, it doesn't adequately check for a NULL server list,
and can easily be done using better API method we provide these days.
All former users of this method can get similar results by calling
alpm_db_get_servers() and using the data from the returned server list.
Signed-off-by: Dan McGee <dan@archlinux.org>
Note that is a bit different than the normal _alpm_db_path() method; the
caller is expected to free the result.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the last user of our global handle object. Once again the diff
is large but the functional changes are not.
Signed-off-by: Dan McGee <dan@archlinux.org>
This makes these functions consistent with the rest of the transaction
related API calls. We do an additional assert to ensure the handle
attached to the package is the same as the handle passed in.
Signed-off-by: Dan McGee <dan@archlinux.org>
The siglevel field of a newly created pmdb_t struct is now
initialized when it is created in _alpm_db_new().
Signed-off-by: Kerrick Staley <mail@kerrickstaley.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
A few of these snuck in as of late, some from the table display patches
that were using the previous format before we changed it after the 3.5.X
major release.
Noticed-by: Kerrick Staley <mail@kerrickstaley.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit e68f5d9a30 did something a bit silly and changed the
scriptlet calls to use 'newpkg->handle' rather than the 'handle'
argument passed in. Use the handle directly.
Signed-off-by: Dan McGee <dan@archlinux.org>
Begin enforcing the need to pass a handle. This allows us to remove one
more extern handle declaration from the backend.
Signed-off-by: Dan McGee <dan@archlinux.org>
This requires a lot of line changes, but not many functional changes as
more often than not our handle variable is already available in some
fashion.
Signed-off-by: Dan McGee <dan@archlinux.org>
The few remaining instances were utilized for buffers in calls to
snprintf() and realpath(). Both of these functions will always ensure
the returned value is padded with '\0', so there is no need for the
extra byte.
Signed-off-by: Dan McGee <dan@archlinux.org>
The vast majority of the time we will just be passing the same string
value on to the lstat() call. The only time we need to duplicate it is
if the path ends in '/'. In one run using a profiler, only 400 of the
200,000 calls (0.2%) required the string to be copied first.
Signed-off-by: Dan McGee <dan@archlinux.org>
Due to the way we set up the graph structure, we don't always have good
parent information. The changes made in dd8cf0c12d assumed this, so
back them out and just live with the dead pointers being there in the
memory while we are cleaning up after ourselves.
Signed-off-by: Dan McGee <dan@archlinux.org>
These new method signatures return and take handle objects to operate on
so we can move away from the idea of one global handle in the API. There
is also another important change and that deals with the setting of root
and dbpaths. These are now done at initialization time instead of using
setter methods. This allows the library to operate more safely knowing
that paths won't change underneath it.
Signed-off-by: Dan McGee <dan@archlinux.org>
This keeps duplicate code to a minimum. This will come in more handy as
we refactor some of these option setters away.
Signed-off-by: Dan McGee <dan@archlinux.org>
When only downloading a package, pacman can produce some incorrect
output.
> pacman -Sddw nvidia-utils
warning: nvidia-utils-270.41.19-1 is up to date -- reinstalling
This line is now now silenced when using -Sw.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to not require the context (e.g. handle) when calling
this function. Also beef up the checks in the two callers of this
function to bail if the last return code is not ARCHIVE_EOF, which is
the expected value.
This requires a change to one of the pactest return codes and the
overall result of the test, but results in a much safer operating
condition whereby invalid database entries will stop the operation.
Signed-off-by: Dan McGee <dan@archlinux.org>
This kills a lot more global handle business off. sync.c still requires
the handle declaration for one reference that can't be changed yet; it
will be removed in a future patch which isolates all of the necesary API
changes.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will make the patching process less invasive as we start to remove
this variable from all source files.
Signed-off-by: Dan McGee <dan@archlinux.org>
Similar to what we just did for the database; this will make it easy to
always know what handle a given package originated from.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the first step in a long process to remove our dependence on the
global handle variable we currently share in libalpm, with the goal to
make things a bit more thread-safe and re-entrant.
Signed-off-by: Dan McGee <dan@archlinux.org>
These are simple accessor functions for a struct; the handle never even
comes into play when calling these functions.
Signed-off-by: Dan McGee <dan@archlinux.org>
The usefulness of this is rather limited due to it not being compiled
into production builds. When you do choose to see the output, it is
often overwhelming and not helpful. The best bet is to use a debugger
and/or well-placed fprintf() statements.
Signed-off-by: Dan McGee <dan@archlinux.org>
Callers to curl_download_internal now tell us if its okay to continue a
transfer, so obey this instead of using a heuristic.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
If a connection drops below 1kb/s for 10s, curl will kill the transfer
and we'll report failure. This is the average transfer speed over the
delta defined by CURLOPT_LOW_SPEED_TIME, so setting a low value here
shouldn't bother folks using 14.4k dial-up.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses FS#24292. If one does the bad thing of not checking
pm_errno after calling set_dbpath(), you may not realize the
initialization process went wrong and calling trans_init() resulted in a
segfault. If we don't have a lockfile path, bail out and have
trans_init() fail.
Also remove a ALPM_LOG_FUNC call that was causing pm_errno to return "no
handle"; this was due to a log call in the handle setup (whereby the log
attempts to use a callback attached to the handle).
Signed-off-by: Dan McGee <dan@archlinux.org>
Issue FS#24230. If a symlink is broken and included in the removal
process of a package, we blew up and segfaulted due to
alpm_compute_md5sum() returning NULL and then performing a strcmp()
operation.
Signed-off-by: Dan McGee <dan@archlinux.org>
The addition of the DB version check introduces a lag time between the
lockfile creation and the transaction initialization. In cases where the
local DB is large enough and/or the user's disk is slow enough, this
time is significant enough that its possible for a user to send a SIGINT
and leave behind a db.lck file.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
It's your own damn fault if you do this, and this code is remnants from
an old time when we weren't very good at coding.
Signed-off-by: Dan McGee <dan@archlinux.org>
This needlessly prevents the easiest way available of clearing any of these
values. We can also do the same for the 'arch' value.
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently we have one call that has all sorts of crazy behavior and doesn't
make a whole lot of sense. Go from one method to the normal four methods we
have for all of our other lists we use in the library to make it a lot
easier for a frontend to manipulate server lists.
Signed-off-by: Dan McGee <dan@archlinux.org>
The switch from FUNCTION to DEBUG was ill-advised inside the local
database load. Instead, add a DEBUG level logger to both local and sync
database loads that shows the number of packages processed.
Signed-off-by: Dan McGee <dan@archlinux.org>
We were erroring out in the case where a first (possibly bogus) mirror
would cause the download process to return a failure code, even though
subsequent servers had the file.
Signed-off-by: Dan McGee <dan@archlinux.org>
This started off removing the "(void)foo" hacks to work around
unused function parameters and ended up fixing every warning
generated by -Wunused-parameter.
Dan: rename to UNUSED.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We had a lot of similar looking code that we can collapse down into a
function. This also fixes errors seen when turning on some gcc warnings
and implicitly casting away the const-ness of the string. Free the list
when we are done with it as well.
Also, fix a logic error where we should be checking with &&, not ||.
Signed-off-by: Dan McGee <dan@archlinux.org>
This makes it possible to omit usage of -lgpgme, just as we can do for
-lcurl and -lcrypto.
Thanks to Rémy Oudompheng for an initial stab at this.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add some lookup functions for nice names for the various types used by
the library, and remove some fields that are of little use to us in the
debug output. This should make looking at key loading and verification a
bit easier, especially in determining what makes up our good and bad
criteria.
Signed-off-by: Dan McGee <dan@archlinux.org>
Both md5sum verification and PGP verification can and should be done at
package load time. This allows verification to happen as early as
possible for packages provided by filename and loaded in the frontend,
and moves more stuff out of sync_commit that doesn't really belong
there. This should also set the stage for simplified parallel loading of
packages later down the road.
Signed-off-by: Dan McGee <dan@archlinux.org>
More stuff going on in the pre-committing stage that can be in a static
method to make things a bit more clear.
Signed-off-by: Dan McGee <dan@archlinux.org>
This part is almost completely self-contained, except building the list
of delta filenames that we use later to check their md5sums. Refactor it
into a static method so we can bring most of the code in sync_commit
closer to the method name.
Signed-off-by: Dan McGee <dan@archlinux.org>
Given that we offer no transparency into the pmpgpsig_t type, we don't
really need to expose it outside of the library, and at this point, we
don't need it at all. Don't decode anything except when checking
signatures. For packages/files not from a sync database, we now just
read the signature file directly anyway.
Also push the decoding logic down further into the check method so we
don't need this hanging out in a less than ideal place. This will make
it easier to conditionally compile things down the road.
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than go through all the hassle of doing this ourselves, just let
GPGME handle the work by passing it a file handle.
Signed-off-by: Dan McGee <dan@archlinux.org>
The various "level" values were a bit crazy to decipher, and we were
doing some very interesting comparisons in certain places. Break it out
into two parameters instead so we can seperate the type from the extra
information display, and do things accordingly.
Nothing changes with the display of any of the five types we currently
show: -Si, -Sii, -Qi, -Qii, -Qip.
Something to note- we should expose the PKG_FROM enum type somehow, this
patch leaves the door open to do that quite easily.
Signed-off-by: Dan McGee <dan@archlinux.org>
There's a lot of related moving parts here:
* Iteration through mirrors is moved back to the calling functions. This
allows removal of _alpm_download_single_file and _alpm_download_files.
* The download function gets a few more arguments to influence behavior.
This allows several different scenarios to customize behavior:
- database
- database signature (req'd and optional)
- package
- package via direct URL
- package signature via direct URL (req'd and optional)
* For databases, we need signatures from the same mirror, so structure
the code accordingly.
Some-inspiration-from: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The allow_resume is the start of the fix to the "don't ever resume
database downloads" problem, as well as being useful for '.sig'
downloads as well. For now, we say "always allow resume", but this will
eventually get pushed down as necessary.
Error checks are reworked in order to correctly error out when a file is
not found on the remote end and reports 0 bytes downloaded. In addition,
the two error messages printed are now different as one reports a more
specific error message provided via the cURL error buffer.
Some example output from an -Sy run with [testing], [community],
[community2], [eee], and [nonexistant] defined as repos. [community2]
and [nonexistant] are both invalid, one using FTP and one using HTTP.
:: Synchronizing package databases...
testing is up to date
community is up to date
error: failed retrieving file 'community2.db' from ftp.archlinux.org : Given file does not exist
error: failed to update community2 (FTP: couldn't retrieve (RETR failed) the specified file)
eee is up to date
error: failed retrieving file 'nonexistant.db' from code.toofishes.net : The requested URL returned error: 404
error: failed to update nonexistant (HTTP response code said error)
Signed-off-by: Dan McGee <dan@archlinux.org>
The value PM_PGP_VERIFY_UNKNOWN is reserved to error cases,
now that the signature verification level defaults to the
globally set level. The only error case is when handle == NULL,
which is false in the context of _alpm_sync_commit().
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This does touch a lot of things, and hopefully doesn't break things on
other platforms, but allows us to also clean up a bunch of crud that no
longer needs to be there.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the standard, and we have had a few of these introduced lately
that should not be here.
Done with:
find -name '*.c' | xargs sed -i -e 's#if (#if(#g'
find -name '*.c' | xargs sed -i -e 's#while (#while(#g'
Signed-off-by: Dan McGee <dan@archlinux.org>
* add _alpm_db_get_sigverify_level
* add alpm_option_{get,set}_default_sigverify
And set the default verification level to OPTIONAL if not set otherwise.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This makes it absolutely dead easy to ensure off_t has the same length
in all compilation units. I just spent 2.5 hours bashing my head on an
issue related to this so damn it I'm fixing it for good.
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently the only error case then when handle == NULL.
However several handle functions return -1 on this error,
and a uniform API makes things simpler.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
For a package to be loaded from any of our backends, these two fields
are always required upfront. Due to this fact, we don't need them to be
backend-specific operations and can just refer to the field directly.
Additionally, our static (and thus private) cache package accessors had
a NULL check on pkg before returning the relevant field. Eliminate this
since they only way they are ever called is via the packages attached
callback struct, which would have caused the NULL pointer dereference in
the first place.
Signed-off-by: Dan McGee <dan@archlinux.org>
So we only need one copy in the final library, not one copy per time
used. Ensure all necessary includes are in place (especially to get the
right size of off_t each time it is compiled) by including "config.h" in
the new graph.c.
One small adjustment here makes the graph_free code more robust- ensure
we don't have invalid pointers after each iteration by looking at the
parents and children and adjusting accordingly.
Signed-off-by: Dan McGee <dan@archlinux.org>
Ensure we only have one- this looks like the result of a bad merge from
old 2008 signing code with the current stuff which has changed quite a
bit.
Originally-seen-by: Rémy Oudompheng <remyoudompheng@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The current state of the code does not allow to see immediately
that it returns a list of pmdepmissing_t structures.
Signed-off-by: Dan McGee <dan@archlinux.org>
Some systems, like FreeBSD might define both statfs
and statvfs: however if statvfs exists whereas getmntinfo()
uses a statfs struct, the current ifdefs would select the wrong
line of code.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
There is no reason to not support versions of libarchive that lack
ARCHIVE_COMPRESSION_UU. Distributions should work properly without
this.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
That's a funny one, building with optimization levels (with both gcc and
clang) caused open_mode to always be set to "ab", which worked.
This was spotted both with clang-analyzer, and by Jakob who reported a
segfault as he was using an un-optimized build.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
So we don't segfault when calling this on be_sync loaded packages. They
return logical values as much as possible for indicating there is no
changelog available.
Signed-off-by: Dan McGee <dan@archlinux.org>
We didn't do this sanity check before trying to open an archive. If
the alpm dbpath wasn't set, the sync database dbpath would be NULL,
causing us to hang indefinitely in archive_read_open_filename() rather
than erroring out.
We already have a corresponding check in local_db_populate().
The following program will test this case, and hangs before this patch
without the call to set_dbpath:
int main(int argc, char *argv[]) {
alpm_initialize();
// alpm_option_set_dbpath("/var/lib/pacman/");
pmdb_t *core = alpm_db_register_sync("core");
pmpkg_t *pkg = alpm_db_get_pkg(core, "pacman");
return 0;
}
Signed-off-by: Dan McGee <dan@archlinux.org>
We had two functions that were oh so similar but slightly different. We
can combine them and add some conditional operation stuff to decide what
to return.
Signed-off-by: Dan McGee <dan@archlinux.org>
Many alpm_option_get/set_*() functions already check this
and set pm_errno to the right value, but not all, so
this improves consistency.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This greatly simplifies the cleanup fallthrough in our download function
and we'll be able to reuse this for signatures.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Based on the fact that localf always points to the same file, there's no
need to code in multiple fopen calls with varying results. Instead,
track the desired file open mode and make a single call to fopen.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Create a more general function that allows appending a suffix to a
filepath.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This lets us determine the real size of the file on disk so that we can
properly bump the progress bar when we're resuming a download.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses FS#23424. The -dd backend code was introduced in commit
b6ec9019d7, and unfortunately the munged depend used for comparison did
not carry through to the eventual display of this version. To fix this,
we undo some of the depcmp_tolerant() business introduced, and instead
make a new pmdepend_t object if necessary when the no dependency version
flag is set. This results in the correct depend being copied to the
missing depend passed onto the frontend.
Signed-off-by: Dan McGee <dan@archlinux.org>
pacman 3.5.0 removed alpm_db_register_local, so calling
alpm_db_unregister_all leaves the front end in a position where there's
no local db, and no way to re-register it.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
After updating a database, remove the old signature to prevent it
being used in validation if the new signature fails to download.
Signed-off-by: Allan McRae <allan@archlinux.org>
If signature verification is needed, attempt to download a signature
file for a repo when it is updated. Return an error if unable to
download signature only when checking is mandatory, or if signature is
invalid.
TODO: At the moment the database signature is only checked on download.
Should we do anything with a database if it fails to be verified to prevent
its future usage?
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a pmpgpsig_t struct to the database entry struct and functions for
the lazy loading of database signatures. Add a function for checking
database signatures, reusing (and generalizing) the code currently used
for checking package signatures.
TODO: The code for reading in signature files from the filesystem is
duplicated for local packages and database and needs refactoring.
Signed-off-by: Allan McRae <allan@archlinux.org>
Our curl callback does a whole lot of work for nothing if the front end
never defined a callback to receive the data we'd calculate for it.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
CURLINFO_HTTP_CODE is deprecated in favor of CURLINFO_RESPONSE_CODE.
Both yield the same values.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The files we transfer are generally compressed already, so this just
adds unnecessary overhead.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Use a static variable to effectively track the initialization state of
the progress callback via the last byte amount reported as downloaded by
libcurl.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* introduces new macro in util.h (DOUBLE_EQ) for properly comparing
floating point values
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the (possibly still temporary) output generated during signature
checking into the --debug output.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Once we do this, add support for VerifySig to pactest. We just check if
the repo name contains Always, Never or Optional to determine the value
of VerifySig. The default is Never. pacman uses Always by default but
this is not suitable for pactest.
Original-work-by: shankar <jatheendra@gmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We pass in a db object, so no need to go looking for it in the list on
the handle. This is a remnant of when we passed in a treename, more than
likely.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will serve as the home directory we pass to GPGME when making calls so
we can have a libalpm-utilized keyring.
Signed-off-by: Dan McGee <dan@archlinux.org>
If a .sig file sits side-by-side on the filesystem with a package archive,
read it in during the package struct creation process so we can verify it at
a later time if necessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a new field to the package struct to hold PGP information and
instruct db_read to pick it up from the database. It is currently unused
internally but this is the first step.
Due to the fact that we store the PGP sig as binary data, we need to store
both the data and the length so we have a small utility struct to assist us.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
We will need these for GPG functionality (decoding the base64 encoded
signature stored in the databases).
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Implements FS#23103. Also modify libalpm so it ignores this value
without any warning as we know it is likely to exist.
Signed-off-by: Dan McGee <dan@archlinux.org>
Wrap lines of long length, noticed while creating and messing around
with some of the other maint branch patches.
Signed-off-by: Dan McGee <dan@archlinux.org>
Noticed with the openoffice/libreoffice replacement scheme where many
packages are listed as replacements to one package, thus electing it for
removal multiple times. Ensure a given package is not already present
before placing it in the removal list.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a rather serious data corruption issue that luckily manifested
itself today in a noticable way. A package in testing had replaces
entries read in as ["%RE pkgname", "%RE"] which was clearly wrong. This
happens when we hit the end of an archive block, do not have a newline,
and have to continue reading from the next block to complete the line.
Signed-off-by: Dan McGee <dan@archlinux.org>
