Rearrange tidy_install so we first remove docs, unwanted files,
libtool files, and empty directories. Then check for missing backup
files and references to $srcdir and $pkgdir. Finally compress manpages,
strip debug symbols, and compress executables with upx.
Fixes FS33318
Signed-off-by: Chirantan Ekbote <chirantan.ekbote@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The difference between the echo and the printf's in write_pkginfo seemed
to be somewhat sporadic. Also, the INFAKEROOT check was doing the same
exact thing as the SPLITPKG check, but formatted much differently and
consuming two extra lines. I think this makes it more readable than it
was previously, if nothing else.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
When building sources with a pkgver function, makepkg will print out the
original version before pkgver() is run, claiming that that is the
package that will be built. This patch simply re-prints the output
later, after pkgver() has been run so people can see which package they
are actually building.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Amazingly, using "sleep 1" to convince btrfs to report correct file
sizes is only a 90% fix. Sometimes more sleep is needed.
Instead we use the --apparent-size argument to du to get actual file
sizes. This is used only on Linux as the various BSDs do not support
this argument.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add an mtree file to the package with all file information. This
can be added to the local pacman database on install allowing full
package verification.
Signed-off-by: Allan McRae <allan@archlinux.org>
Places logs in a pre-defined location. The logs are always neatly
labeled with package names and numbers, and this way can be more easily
sent to network shares as they are written or compressed/cleaned en
masse.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Specifically, we shouldn't allow newlines in the pkgdesc field, as
pacman will ignore the continuation and end the description prematurely
as written to the local DB. Normalize ALL whitespace, replacing it with
single whitespace characters.
Fixes strange errors as seen by FS#32852.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Although it should be currently quite obvious what package is being
created when "Creating package..." is printed, it will not be in the
future when a debug package is potentially created too. Also, given
$pkgname is always correctly set when split packaging now, we no
longer need to pass that around.
Signed-off-by: Allan McRae <allan@archlinux.org>
When using the "debug" option in combination with "strip", move the
debugging symbols into a separate directory ($pkgdir-debug/usr/lib/debug)
suitable for creating a package from.
Create hardlinks between debugging symbols of hardlinked files and add
symlinks in the .build_id directory if the binary has a build ID.
Signed-off-by: Allan McRae <allan@archlinux.org>
Unify split and single packages to always use a folder within pkg/
as thier $pkgdir. This will allow a folder for storing a package with
stripped debug symbols to be added within pkg/ too.
Signed-off-by: Allan McRae <allan@archlinux.org>
Move stripping of files to a spearate function that will be expanded
for the handling of creating debug symbol packages.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a "debug" option that appends the compiler flags specified in the
variables DEBUG_CFLAGS and DEBUG_CXXFLAGS in makepkg.conf to their
counterpart buildflags.
Signed-off-by: Allan McRae <allan@archlinux.org>
When using "makepkg -R" without a packge function, we should still
run tidy_install as the user might have added other packaging options
such as (e.g.) '!emptydir' to remove empty directories on repackaging.
Of course we can not revert some options when repackaging without a
package function.
Signed-off-by: Allan McRae <allan@archlinux.org>
Simply add the option to pass the --needed flag to pacman when using -i
with makepkg. When using makepkg in scripts, particularly for git
packages with the new version functions and not just a date, this can
save disk io and time instead of reinstalling.
This would mostly be useful with the --noconfirm option.
Signed-off-by: wgiokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Most of makepkg already uses sentence case. This cleans up the last few
stragglers.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
After we install dependencies, we source /etc/profile so that new
elements get added to the path. As this can override any local setting
of PATH, we store the full path of the PACMAN variable passed to makepkg.
Also, add a check for PACMAN availability if it is needed to deal with any
dependency operations.
Reported-by: Martin Panter <vadmium à gmail·com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This resolves an inconsistency with how the $PACMAN variable was interpreted.
Previously “makepkg” would extract the first word from the $PACMAN variable
and check that it existed as a command. This appears to have been happening
ever since the variable was implemented in revision 66c6d28 (makepkg: allow
to specify an alternative pacman command). Thus it looks like command
arguments were originally allowed in the variable.
However the run_pacman() function now quotes $PACMAN, so the whole variable
has to be just the command name. This quoting was introduced more recently,
perhaps in revision 622326b (makepkg: fix sudo/su calling of pacman).
Signed-off-by: Allan McRae <allan@archlinux.org>
The package() function has been around since pacman-3.3 and has
significant advantages including limited fakeroot usage and correct
repackaging. The ability to use PKGBUILDs without a package function
will be removed in a future release.
Signed-off-by: Allan McRae <allan@archlinux.org>
There are valid reasons for a source files PGP signature to be changed
(expired key, expired signature, additional person signing...). Thus
providing a checksum for signature files can potentially cause a
PKGBUILD to require unnecessary updating.
Avoid this issue by using "SKIP" for the signature checksum.
Fixes FS#31590.
Signed-off-by: Allan McRae <allan@archlinux.org>
Using the last match in the BUILDENV and OPTIONS arrays allows the
user to easily override these values without specifying the entire
array. For example add "BUILDENV+=(sign)" in ~/.makepkg.conf.
Fixes FS#26701.
Signed-off-by: Allan McRae <allan@archlinux.org>
The list of which download protocol should look in makepkg.conf for the
download agent was hard coded into makepkg. Instead, fallback to checking
the the download agents array for any non-local or (implemented) vcs
source.
Signed-off-by: Allan McRae <allan@archlinux.org>
* For any vcs other that git, the fall through resulted in being handled by the
code for std url, hence fragments were being left on.
* Handle vcs urls than end in a slash correctly, eg http://example.com/project/
Signed-off-by: Gary van der Merwe <garyvdm@gmail.com>
Before this patch, makepkg does not check if $dir is a local clone of
the right repo.
For example, git fetch would be run even if $dir is not a local
bare clone of a git repo in present in source(), but a subdir of
a checked-out one. That means makepkg can potentially fetch from
a completely unrelated remote and update completely unrelated
dirs/files.
This patch adds a check to make sure we are fetching from the right
remote.
Signed-off-by: Mohammad Alsaleh <msal@i2pmail.org>
Before this patch, makepkg would only check if $dir exists as an
indication that a local clone exists. And if $dir does exist, makepkg
will run git fetch inside it unconditionally.
After applying this patch, makepkg will check if the existent $dir is
empty. And if it is, it will be used to store a local clone.
Signed-off-by: Mohammad Alsaleh <msal@i2pmail.org>
Three warnings after someone deliberately typed --noextract is a
tad excessive... Also, an empty $srcdir is perfectly valid when
the source array is empty, although using --noextact then is
wasteful.
Signed-off-by: Allan McRae <allan@archlinux.org>
Rather than calling upon ls for this, use a proper shell function which
uses globbing to determine the existance of files in a directory.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
If a pkgver() function is specified, delay checking the package is
built until the pkgver is updated..
Signed-off-by: Allan McRae <allan@archlinux.org>
Do not update VCS sources if --holdver is used. If the VCS checkout
is not present, it will still be downloaded.
Signed-off-by: Allan McRae <allan@archlinux.org>
VCS sources are not needed for --geninteg or --source operations.
This also prevents VCS downloads outputting to stdout, which
prevented piping -g output to the PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
Allow SVN repo sources in the form:
source=("<folder>::<repo>#<fragment>")
where <repo> must start with svn (e.g svn+http://) and a <fragment>
can specify a revision (e.g. revision=22).
Signed-off-by: Allan McRae <allan@archlinux.org>
Now that VCS repos are provided in the source array, it becomes too
complicated to have automatic updating pkgver as was the case with
the old VCS PKGBUILDs (there can be multiple repos of different types
in the source array, the VCS repo may not be the package primary
source, etc).
Instead provide an optional way for a PKGBUILD to update the pkgver
value through the specifing of a pkgver() function that returns the
new version string. This is run after all source files are downloaded
so can access the VCS repo if needed.
Signed-off-by: Allan McRae <allan@archlinux.org>
With VCS sources, get_filepath should return the directory of the
checkout. This allows backing up of the VCS checkout when using
--allsource. Fixes FS#21098.
Signed-off-by: Allan McRae <allan@archlinux.org>
Modify get_filename to return the name of the folder with VCS sources.
This fixes output issues in checksum checking.
Signed-off-by: Allan McRae <allan@archlinux.org>
Allow specifing GIT sources using the following syntax
source=('<folder>::<repo>#<fragment>')
This will download the git repo <repo> into <folder> (into $SRCDIR
if set, otherwise $startdir). <repo> must start with "git", but
non-git protocols are handled using (e.g.) "git+http://...".
The <fragment> can be used to specify a branch, tag, or commit to
build from. e.g. branch=maint.
Checksum entries for git sources should be "SKIP".
Signed-off-by: Allan McRae <allan@archlinux.org>
If "SKIP" is provided for an integrity check, abort checking as soon
as possible.
Also swap fork to tr for bash4 conversion.
Signed-off-by: Allan McRae <allan@archlinux.org>
In order to treat all VCS sources as URLs, we need to be able to
deal with more protocols. Rewrite download_sources to use a case
statement so additional protocols are easily added.
Also fix the use of scp to not pass the protocol in the URL
(noticed by William J. Bowman <wjb@williamjbowman.com>)
Signed-off-by: Allan McRae <allan@archlinux.org>
There is no actual code change here, but these related functions
were all over the place which makes this code difficult to adjust.
Signed-off-by: Allan McRae <allan@archlinux.org>
The current VCS packaging support is really, really, really bad.
It is best to strip it out completely before rewriting it.
Signed-off-by: Allan McRae <allan@archlinux.org>
This extra newline leaves a gap that looks strange in of itself,
but is highlighted when piping -g output to a PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
add the asdeps flag for makepkg so that it does pacman -U --asdeps
[Allan: clean-up whitespace]
Signed-off-by: Daniel Wallace <daniel.wallace12@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Similar to the case for makedepends, it is useful to be able to
access this information without parsing a PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
I have noticed that quite a number of packages fail with "makepkg -R"
when their (make)dependencies are not installed. Adjust makepkg to
check for dependencies when used with -R. This can still be avoided
by using --nodeps/-d.
Signed-off-by: Allan McRae <allan@archlinux.org>
This is already being used (despite not working...) in packages
in the Arch Linux repos.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allow makepkg to work correctly when used with find from busybox.
Fix handling of cross directory symlinks.
Signed-off-by: Jeremy Huntwork <jhuntwork@lightcubesolutions.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Rewrite the handling of libdepends. The primary advantage are:
- Moves functionality from write_pkginfo() to find_libdepends().
- The order of the depends array in the PKGBUILD is kept in the package.
- An unneeded libdepends is only a warning and not an error. This allows
putting a libdepend on a library that is dlopened.
- It is now modular so can be extended to library types other than
ELF *.so.
- Finding the list of libraries a package depends only occurs when a
libdepend is specified in the depends array.
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently there is no way to access the makedepends for a package
apart from parsing its PKGBUILD. Put these into the .PKGINFO file
with the idea of making them available in the repo dbs so that
automated build tools can readily determine build order.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add CPPFLAGS support in addition to the current CFLAGS and CXXFLAGS.
This keeps compiler flags split up in the same logical way done
everywhere else.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
With bash4 as a requirement, we can use mapfile when reading command
output into an array. mapfile has the advantage of using block buffered
I/O rather than line buffered I/O, making it slightly faster for most
jobs.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
get_pkg_arch checked for the arch variable being overridden in the
package_$1() function when used with a package as a parameter.
However, when there was no override, it did not fall back to the
global value.
Signed-off-by: Allan McRae <allan@archlinux.org>
Instead of creating a subshell for each of these checks (of which there
are many), pass in an expected value and make the check_* function do
the comparison for us, returning 0 (match), 1, (mismatch), or 127 (not
found).
For a measureable benefit, I tested this on a fairly simple package,
perl-term-readkey, and counted the number of clone(2) syscalls to try
and isolate those generated by makepkg itself, rather than the user
defined functions. Results as shown below:
336 before
180 after
So, roughly a 50% reduction, which makes sense given that a single
check_option() call could be up to 3 subprocesses in total.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This fixes a lot of checks done by makepkg (e.g. to see if a package
is already built and choosing which package to install). Previously,
if a package had both "i686" and "any" versions, the "i686" one
always took precidence regardless of the value of "arch" in the
PKGBUILD for that package. Fixes FS#27204.
Signed-off-by: Allan McRae <allan@archlinux.org>
If the PKGBUILD isn't writeable for devel_update, throw a warning
instead of silently ignoring it. Some logical reordering is present in
this patch to reduce the number of nested if's.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
It's expected that this will lead to unwanted behavior, and needs
widespread testing. It's desirable to commit this for a few reasons:
- there's no reason we can't do our own error checking for code that we
write.
- it avoids the need for ||true hacks scattered about in the code.
- it makes us immune to upstream changes in exit codes (FS#28248)
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Make these functions more whitespace space by treating newlines as the
element delimiter rather than every form of whitespace.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This was a small oversight from 1917c845 which causes makepkg to write
provides entries to the .PKGINFO file improperly, e.g.
provides = systemdlibsystemdudev=999
Add a newline in the printf format to ensure that these are spaced
appropriately.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
In preparation for the removal of the global error trap we need a
way to ensure changing directories succeeds. Add a "cd_safe"
wrapper that performs the necessary check.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Also make sure the strings passed to %s in printf are always quoted.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This was really only half a fix for FS#28445, as it still doesn't
correctly handle the case of filenames with spaces. In the short term,
there is no obvious fix for this. In the long term, I believe the
correct decision is to rewrite the options parser to be more in line
with GNU getopt_long.
This reverts commits:
ca41427141.
969dcddbdf.
delayed allocation hoses us here and causes erroenous install sizes to
be reported. Add a short sleep to allow the transaction to be committed
to the filesystem and the stat buffers to be updated.
This is apparently a "feature", as per to some of the denizens of #btrfs
on freenode.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Most places in makepkg deal with full file paths, but a few use the
file name only. Protect from potential issues when a file name
starts with a hyphen.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This means multiple packages can be build using the same BUILDDIR
without their source files all ending up extracted in the same
directory. Fixes FS#28417.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Similar to how we manage receipt of SIGINT in pacman's internal
downloader, catch the signal and invoke our own trap handler before
unsetting it and calling the default. This requires a slight
modification to the arguments passed to trap_exit so we can pass the
raised signal to trap_exit (note that we substitue USR1 for ERR since
the latter is unique to bash).
Fixes FS#28491.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Adds the ability to override the commands used to compressing
compiled and source packages. This is useful for those wanting
to use alternative implementations of the compression tools or
non-default compression options.
Allan: documented options in man page
Signed-off-by: Allan McRae <allan@archlinux.org>
With multiple items in $libdepends this check only worked for the first
one, everything after this returned an error. This was probably an issue
with \s being treated wrong.
Fix-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Florian Pritz <bluewind@xinu.at>
libperl.so results in soname="libperl.so.so" which is wrong.
This returns the correct string: "libperl.so"
Fix-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Florian Pritz <bluewind@xinu.at>
This reworks the implmentation of libprovides for the following
benefits:
- Moves functionality from write_pkginfo() to find_libprovides()
- Only calculates the version for libraries specifically requested
and not all libraries. This has the disadvantage of running find
over the $pkgdir for as many libraries as needed, but is unlikely
to be an issue due to caching.
- The order of the provides array in the PKGBUILD is kept in the
package
- There are more warning messages when things fail and those that
were there are no longer errors (as I do not think failure of
libprovides should result in complete packaging failure)
- It is now modular so can be easy extended to other library types
other than ELF *.so.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Modify parse_options logic to fill an array instead of printing parsed
options. Avoid eval like the plague. Because it is the plague.
Fixes bugs such as FS#28445.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes a problem that occurs if you tell makepkg to remove installed
dependencies (just to be sure) but there are none. As the $ was missing
in front of deplist, the check never happened and 'pacman -Rn' was
called which obviously failed.
Dan: later reported as FS#28448.
Signed-off-by: Christoph Vigano <mail@cvigano.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This wonderful/awful little bash shell variable wrecks havoc on `cd`
calls in shell scripts. Unset CDPATH in makepkg where we use `cd` quite
heavily. In pacman-optimize, we can move the change directory logic into
the bsdtar call so we are left with no usages of `cd` in the script.
Signed-off-by: Dan McGee <dan@archlinux.org>
PKGBUILDs are advertised as being pure bash so it would be expected
that the default bash options are in effect when sourcing it.
This inadvertantly "fixes" FS#27780 where enabling extglob causes
the bash parser to error on non-valid bash function names like
package_libxml++(). Note that these function names are unsupported
in bash and could break again even with this "fix" in future bash
releases.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
From mercurial-2.1, "hg pull" returns 1 when there are no updates.
Catch the return code and either pull the update or return an
error as appropriate.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Provide a helpful error message for when creating a source tarball
and SRCPKGDEST is not writable.
Fixes FS#28197.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses two problems:
1) echo's behavior is inconsistent when dealing with flags, and can
potentially be problematic.
$ echo -n
$ echo -- -n
-- -n
2) Always using the end of options markers prevents translated strings
from throwing errors, as shown in FS#28069.
The remaining "inconsistencies" are because printf is being used in a
guaranteed safe manner, e.g.
printf '%s\n' "$(gettext "--this can never break")"
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This "fixes" two issues:
1) MAN_DIRS contains a glob by default so should not be quoted. It is
not quoted anywhere else so this should not cause breakage...
2) the find statement returns 1 when some of MAN_DIRS are missing. This
appears to only be exposed when running makepkg as root (which it appears
some wrappers do...).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
With pacman-4.0, using --noconfirm or --noprogressbar with -Q or -T
results in pacman reporting an "invalid option" error. Restrict the
passing of these options to pacman. Fixes FS#28012.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The grep statement used to check for a difference between the
installed package list before and after resolving dependencies
returns 1 if there is no difference. This sets of the error
trap when "-r" is used "unnecessarily".
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
makepkg would not abort on a missing download agent due to the
output variable being declared local on the same line as the
function call in the assignment. That would result in strange output
such as:
==> Retrieving Sources...
==> ERROR: There is no agent set up to handle foo URLs. Check /etc/makepkg.conf.
Aborting...
-> Downloading foobaz...
/home/arch/code/pacman/scripts/makepkg: line 401: foo://foobaz: No such file or directory
==> ERROR: Failure while downloading foobaz
Aborting...
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Declaring the variable as local on the same line as the assignment
results in result of the assignment being returned rather than the
result of the function on the righthand side of the assignment.
Declaring the variable as local on a separate line means the result
of the function on the r.h.s. is returned and our error function
will be invoked if necessary (although it is practically impossible
to ever trigger it...).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Simplify the source tarball generation by unifying the handling of
local and remote files. This also allows local files to be found
in $SRCDEST (FS#26580) and makepkg will abort on missing local source
files (only possible to trigger in combination with --skipinteg).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The current calculation of the total file size for a package using "du"
suffers from issues in portability and correctness. Especially on btrfs,
this can result in clearly wrong package information such as:
Download Size : 14684.29 KiB
Installed Size : 7628.00 KiB
Use an approach based on "stat" to calculate total file size.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Using the value of "SKIP" in the checksum array will cause that
integrity check to be skipped. This makes building packages that
rely on user configurable sources less painful.
Based-on-patch-by: Dan McGee <dan@archlinux.org>
Based-on-patch-by: David Campbell <davekong@archlinux.us>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allows renamed .asc/.sig files to be still discovered by makepkg. This
is needed for a package such as PuTTY, which provides abnormally named
sig files (.DSA and .RSA) which are valid input for gpg --verify.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Be more semantically accurate and avoid accidental overwriting of some
configuration variables that are considered to be constant.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
Whereas comm will check inputs to see if they're sorted (and warn when
they aren't), grep doesn't even care about ordering. In this particular
instance -- neither do we. We're only interested that the two lists are
equivalent.
Fixes FS#26580.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add support for overriding configuration in /etc/makepkg.conf and
~/.makepkg.conf by setting the environment variable PACKAGER similar to
how SRCDEST and PKGDEST behave.
Signed-off-by: Allan McRae <allan@archlinux.org>
This applies to pkgver, pkgrel, and epoch and ensures that any trailing
whitespace outside of the context of the variable declaration itself is
properly trimmed. The Bash parser will ignore this, and so should we.
We don't need to worry about leading space because it would force a
syntax error, or fail validation.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevent bsdtar from exploding when install= or changelog= are
present without a value.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Detached sgnature files with extension .sign are accepted by gnupg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This includes some fixes to the messages that are displayed when a
signal is caught in makepkg or repo-add:
* Instead of always showing "==> ERROR: TERM signal caught. Exiting...",
replace "TERM" by whatever signal is actually caught.
* Fix a typo in the SIGERR error message in repo-add ("occurred" instead
of "occured"). Francois already fixed this for makepkg in 1e51b81c.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
Inline comments after pkgver or pkgrel would cause the sanity
checks to fail so remove them before checking the value.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If PKGEXT is not one of the recognized tar*'s, create_package() would
create an empty package file and fail, since bsdtar on the left side of
the pipe returns 141 on SIGPIPE (broken pipe).
This patch changes the behavior for an invalid PKGEXT. A warning is
printed on stderr, and a tar file is created. Also retire the obsolete
$EXT variable.
Add the obligatory comment why we don't use bsdtar's compression.
Finally, fix mixed-tab-space indentation.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Always quote the righthand side of expression when the == or != operator
is used, unless intended as a pattern. Quoting bash(1):
When the == and != operators are used, the string to the right of the
operator is considered a pattern. Any part of the pattern may be quoted
to force it to be matched as a string.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
If '-' isn't the last item, it's interpreted as a range and not
literally, causing problematic behavior in parsing optdepends.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Many PKGBUILDs use formatting whitespace when specifying optdepends.
This is removed when adding a package to a repo-database so the
output of "pacman -Si <package>" and "pacman -Qip <package file>"
becomes inconsistent. Instead, do the adjustment when creating
the .PKGINFO file.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allow the specification of versioned optdepends with an epoch.
This also (partially) enforces a whitespace between ":" and the
description which is required for the future optdepends parsing
code.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
4ed12ae tightened up the logic to use only find, but ignored the fact
that since the manpage hard link names were no longer captured. They
were created as separate compressed manpages, rather than as hardlinks.
This also introduces a minor efficiency of deleting all hardlinks at
once and using proper iteration over an array rather than a string.
Note to anyone else touching this code: e2fsprogs and libpcap are useful
for testing this. If that changes in the future, you can use the below
bash to locate others:
IFS=$'\n' read -rd '' -a a < <(find /usr/share/man -type f \! -links 1)
pacman -Qqo "${a[@]}" | sort -u
I broke it!
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
When a sourceball passes this check without any warnings, a newline is
omitted. Similar to the if clause of this else block, print a single new
line at the end of the clause instead of accounting for each output.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This prevents makepkg from aborting with 'file not found' when
changelog= or install= are declared in a PKGBUILD, but empty.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This is a fix for a bash3 specific bug, where a file sourced by
/etc/profile would exit non-zero and make its way back up to makepkg,
forcing it to exit after package installation. Along with unsetting the
ERR handler, temporarily unset errexit to avoid this.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
- display associated warnings on same line as pass/fail msg, to be more
consistent with checksum verification output
- properly error on a revoked key (matching pacman's behavior)
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
We seem to enjoy using bash regex capabilities, but never referencing
the result with BASH_REMATCH. Replace almost all regexes with equivalent
globs which are faster and functionally equivalent in these cases.
This enables the extglob shopt.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Don't just set the flag variables to zero length strings, actually unset
them from the environment. This fixes issues with broken gnu Makefies
that use ?= for assigment, where the presence of a var is enough to make
this condition avoid assignment.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The regex wasn't rooted at the end of the filename, nor was it matching
a period/dot before the file extension. The end result was this matched a
file named '07_all_sig.patch' which is totally broken.
Signed-off-by: Dan McGee <dan@archlinux.org>
Read the entire variable, respecting escapes, which are necessary to
retain for the successive eval.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Further improvments on 2ca27ab which will allow the changelog and
install script files to contain whitespace.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Broken in 2ca27a by me, trying to fix another problem.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a safety measure to prevent simple code injection.
$ i="foo bar"
$ eval i="$i"
bash: bar: command not found
$ eval i=\"$i\"
$ echo "|$i|"
|foo bar|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If any of pkgver, pkgrel or epoch contained a variable substitution,
then it needed to be evaluated before checking its value conformed
to the rules.
[Dan: add quotes around RHS]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
makepkg --source is a often used go make source package like for AUR.
Have a -S shortcut will save the world.
Signed-off-by: Sebastien Luttringer <seblu@seblu.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
In this case, we skip the epoch versioning entirely, as if it were
declared as 0.
Prevents errors such as:
/usr/bin/makepkg: line 244: ((: ! : syntax error: operand expected
(error token is " ")
==> Finished making: cower-git :20110808-1 (Mon Aug 8 17:17:27 EDT
2011)
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the source integrity checking into its own function as the code
was duplicated and is now more complicated with the separation of the
two checks types.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allows the skipping of all integrity checks (checksum and PGP) or
either the checksum or PGP checks individually.
Original-patch-by: Wieland Hoffman <theminew@googlemail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Many projects provide signature files along with the source code
archives. It's good to check these, too, when verifying the integrity
of source code archives.
Not everybody is using gpg so the verification can be disabled with
--skippgpcheck.
Additionally, only a warning is displayed when the key that signed the
source file is unknown.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When epoch, pkgver and/or pkgrel were overridden in a split package
function, makepkg failed hard finding the real version for checking
if packages were already built or trying to install packages. Fix
the get_full_version function to deal with overrides and return the
actual package version.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We can override pkgver and pkgrel so it is only logical to add epoch
to that list
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Check any overrides of the "arch" variable contain the required
architecture.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Enforce syntax checking for pkgrel and pkgver overrides in package
functions.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
There is always someone who tries to break things (cough *Dave* cough...)
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Specifying a filename with spaces in a PKGBUILDs noextract array fails
due to a lack of quoting.
Fixes FS#25100.
Reported-by: Thomas Weißschuh <thomas_weissschuh@lavabit.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
There is no need for a writable PKGDEST when using the --nobuild or
--geninteg flags.
Allan: added --geninteg
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We nuke it from the completion file as well along with its longopt.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The '[[ -z' test in in_array() is redundant, so remove it.
Signed-off-by: DJ Mills <danielmills1@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Instead of hacking around the error trap, simply do an explicit
test for failure.
Signed-off-by: DJ Mills <danielmills1@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This adds the '.tar.Z' option to both repo-add and makepkg for no other
reason than "why not", and because bsdtar supports it natively with the
'-Z' flag. Also update the documentation accordingly.
Signed-off-by: Dan McGee <dan@archlinux.org>
vim recognises what type of shell script it's dealing with by looking at
the shebang. If detection fails it falls back to sh which doesn't
support some bash features. Adding a normal, possibly broken, shebang
which gets fixed by the Makefile allows vim to detect bash syntax.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
Otherwise there is no way to easily test or run with a standalone config
file without outside interference.
Signed-off-by: Dan McGee <dan@archlinux.org>
The path was not being stripped from $file before prefixing with
$srcdir resulting in the attempted removal of a very weird
filename.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#24893.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
* 'master' of git://projects.archlinux.org/pacman:
pactree: carry a list of databases for dep resolution
makepkg: Remove a lone quotation mark
makepkg: remove the cleancache option
Don't require a transaction for sync DB updates
Move locking functions to handle
Add a 'valid' flag to the database object
Move database 'version' check to registration time
Do database signature checking at load time
This is a fairly useless feature given all it does is an "rm" on a
directory. It is also unlikely that you would want to remove the
entire SRCDEST anyway, but rather just the old files.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
There was a lot of inconsistency in how strings that should not be
translated (program names, option flags, PKGBUILD directives, etc) were
handled. This patch moves them all outside the gettext invocation for
consistency and to prevent accidental translation.
Note that some of these may need reverted if they cause difficulties in
translation due to gettext usage in bash not taking positional parameters
for arguments. A quick survey of current translations indicates that this
issue will be rare. Also, we should be able to catch these before a full
string freeze given we are going to probably need a "developer preview"
release before the next release series.
Signed-off-by: Allan McRae <allan@archlinux.org>
This is the first step at separating the pacman message catalog and the
scripts message catalog. Makefiles, configure.ac, and other such files
are adjusted accordingly, as well as renaming files. The TEXTDOMAIN of
scripts is also adjusted.
Note that no actual pot or po files get changed here; these will get
pruned in a future commit so each catalog contains only the necessary
messages.
Signed-off-by: Dan McGee <dan@archlinux.org>
Way back in c94bfbaba when refactoring makepkg options handling, I added
these lines to unset MAKEFLAGS if '!distcc' was set in a PKGBUILD (not
taking into account makepkg.conf settings). This was an attempt to say
"if it is broken in distcc, it is probably broken even more". However,
this is silly as one should be using '!makeflags' as well. Remove the
linkage.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a function that checks for the software needed by makepkg to
process a PKGBUILD with the requested options. This allows makepkg
to bail early in the packaging process.
Many other checks can be added to this function...
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Contractions are less clear for non-native speakers so should be
avoided (and cause syntax highlighting issues). Also, the 'provides'
and 'depends' strings are not to be translated.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a BUILDDIR variable (which can be overridden in the environment)
to specify an alternative location for building the package. This is
useful for people who want to build on a different filesystem for
improved performance (e.g. tmpfs).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch enables the automatic compression of executable binaries
using UPX when the 'upx' options is specified in makepkg.conf or the
PKGBUILD. Additional arguments can be passed to UPX by specifying
the UPXFLAGS variable.
Original-patch-by: Bryce Gibson <bryce@gibson-consulting.com.au>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Create source package files inside the fakeroot environment to
ensure reasonable ownership of files within the archive.
Fixes FS#24330.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This move the getopt replacement function parse_options out of
makepkg.sh.in and into a separate file. The code is inserted
into the relevant place in makepkg using m4.
This will allow the reuse of the option parsing code in other
scripts (i.e. pacman-key) while avoiding code duplication.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Clarfiy that it is unwanted files are being removed rather than "other"
files (whatever they are...).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When creating a source package using an non-local buildscript via
the -p option, the inclusion of changelog and install files would
fail. Fixes FS#24567.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The user adds libaries to the depends array without a version. These
must end with .so.
Example: depends=(glibc libc.so)
find_libdepends() looks for ELF files (not symlinks because these could
point outside of pkgdir) in $pkgdir, extracts the library sonames the
binary links to and outputs depends seperated by spaces.
This list contains all libraries needed by the package.
Example: libfoo.so=3-64
write_pkginfo() only keeps .so depends with version information and warns
the user about unneded ones.
Support-by: Thomas Bächler <thomas@archlinux.org>
Support-by: Christoph Schied <Christoph.Schied@uni-ulm.de>
Signed-off-by: Florian Pritz <bluewind@server-speed.net>
The user adds libaries to the provides array without a version. These
must end with .so.
Example: provides=(readline libreadline.so)
find_libprovides() looks for .so files (not symlinks because these could
point outside of pkgdir) in $pkgdir, extracts the library soname (ld
links the binary to this name) and outputs provides seperated by spaces.
This list contains all libraries provided by the package.
Example: libfoo.so=3-64
write_pkginfo() only keeps .so provides with version information and warns
the user about unneded ones.
Support-by: Thomas Bächler <thomas@archlinux.org>
Support-by: Christoph Schied <Christoph.Schied@uni-ulm.de>
Signed-off-by: Florian Pritz <bluewind@server-speed.net>
The help message changed to match the one rankmirrors script has.
It's clearer as to what the --help switch does.
Signed-off-by: Ivan Kanakarakis <ivan.kanak@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add the "GPGKEY" option to makepkg.conf for specifying signing packages
with the non-default key from the keyring. Is overridded by makepkg's
--key option.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
GNU su supports the -c option to specify a command to execute.
However, other flavours of su may have a different interpretation
of the '-c' flag (e.g. FreeBSD and OpenBSD).
The behaviour is correct when '-c' follows an explicit username.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
A non-GNU version of awk may not support the (|...) syntax for
an optional group and require '()' to match an empty string.
The (...)? syntax is more appropriate for this usage.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Trailing backslahses can lead to additional spaces at the front
of extracted entries. See FS#23524. Strip these while parsing
the PKGBUILD entries.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The use of "tr" only leads to trouble. Remove unnecessary usage
of it from within makepkg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
to quote dan:
"turkish will FUCK YOU UP. this is not the first or the last time"
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Three new command line options were added:
--sign: forces the generation of a signature for the resulting package,
taking precedence over the value in makepkg.conf
--nosign: do not sign the resulting package
--key <key>: use a different key than the user's default for signing
the package.
A check is performed to ensure the user has (provided) a valid gpg key
for signing.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
My main motivation was to remove the "sync", which can stall for
minutes on a busy machine (FS#23378). I also cleaned up the redirection.
Signed-off-by: Jan Steffens <jan.steffens@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
