This introduces support for architecture-specific conflicts, depends,
optdepends, makedepends, replaces, and conflicts by appending "_$CARCH"
to the array name. For example, in the global section:
arch=('i686' 'x86_64')
depends=('foo')
depends_x86_64=('bar')
This will generate depends of 'foo' and 'bar' on x86_64, but only 'foo'
on i686. Moreover, this is supported in the package functions with the
same heuristics as the generic names, e.g.
...
arch=('i686' 'x86_64')
depends=('foo')
...
package_somepkg() {
depends_x86_64=('bar')
...
}
Again, will cause x86_64 to have depends of 'foo' and 'bar', but only
'foo' for i686.
Break apart each of the blocks into their own separate functions. And,
instead of the hand crafted eval statements, reuse the logic from
pkgbuild-introspection[0] to abstract away the complexities of parsing
bash.
This commit fixes at least 3 bugs in check_sanity:
1) The wrong variable is shown for the error which would be thrown
when, e.g. pkgname=('foopkg' 'bar^pkg')
2) The "arch" variable is not sanity checked when the PKGBUILD has
an arch override, but only one output package.
3) https://bugs.archlinux.org/task/40361
Lastly, there's some string changes here which should help to clarify
a few errors emitted in the linting process.
[0] https://github.com/falconindy/pkgbuild-introspection
Dependencies are now handled with --nobuild unless specificially skipped.
Using --verifysource will skip dependency checks unless --syncdeps is
specified.
Fixes FS#35057 and FS#36999.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add an array VCSCLIENTS to makepkg.conf that matches vcs source protocols
to the package containing the software needed for handling the source.
Signed-off-by: Allan McRae <allan@archlinux.org>
The documentation very clearly states that the buildfile has to be in
$PWD, but the error thrown by makepkg reference some mysterious "build
directory". Simplify this check so that we more directly check that the
file being referred to is in fact in our $PWD. Revise the error message
when the check fails to more plainly point out the problem.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add support for following the XDG Base Directory Specification when
reading the user-specific configuration file.
If no $XDG_CONFIG_HOME/pacman/makepkg.conf file exists we fall back to
sourcing $HOME/.makepkg.conf
Signed-off-by: Johannes Löthberg <johannes@kyriasis.com>
[Allan] Note XDG_CONFIG_HOME takes priority.
Signed-off-by: Allan McRae <allan@archlinux.org>
After resourcing the PKGBUILD in update_pkgver(), set the epoch to 0
if it is empty. Also adjust the get_full_version function to be more
robust if epoch somehow still is empty.
Fixes FS#41022.
Signed-off-by: Allan McRae <allan@archlinux.org>
This ensures packages build on a UTF-8 locale system with non-ASCII character
names can be installed on non-UTF-8 systems.
Signed-off-by: Allan McRae <allan@archlinux.org>
Remove the comment above the signature generation command as the command
is self explanatory and no longer does what the comment says.
Signed-off-by: Allan McRae <allan@archlinux.org>
We expect all source file to lie in $startdir. However, using
"makepkg -p <buildscript>" can currently allows people to specify buildscripts
in other directories. This results in confusion about where other sources
should lie (in startdir or in the directory that the buildscript is in).
Explicitly disable using -p for files in other directories to avoid this issue.
Fixes FS#40293.
Signed-off-by: Allan McRae <allan@archlinux.org>
If validpgpkeys is set in the PKGBUILD, signature checking fails if
the fingerprint of the key used to create the signature is not listed
in the array.
The key's trust value is ignored.
Signed-off-by: Allan McRae <allan@archlinux.org>
Instead of invoking grep multiple times, parse the status file once.
This refactoring also changes the behvaiour when signature verification
fails due to a missing public key: It is now an error instead of a
warning.
Signed-off-by: Allan McRae <allan@archlinux.org>
Provide pkgbase information for non-split packages with pkgbase set.
Also record the version of the "base" package. This is useful for
matching package files to source packages.
Signed-off-by: Allan McRae <allan@archlinux.org>
Packaging outside of fakeroot can result in incorrect permissions for
package files. It has been years since fakeroot issues during packaging
were common, so it is safe to enforce fakeroot usage. If using fakeroot
is impossible for some reason, a two line wrapper script will suffice to
fool makepkg.
Signed-off-by: Allan McRae <allan@archlinux.org>
The days of fakeroot being error ridden are long gone, so there is no
valid reason to run makepkg as root.
Signed-off-by: Allan McRae <allan@archlinux.org>
1. Packagers who want to test the package() function, i.e. to check the content
of the pkg/ folder.
2. Developers who want to check how the packaged version of a program looks, in
other words how the pkg/ folder looks.
3. For users of systems with no port tree, makepkg can ease package creation.
However the resulting archive of the whole makepkg process is often useless.
For all situations, makepkg will usually be called several times. But no archive
(the final package) is needed in any cases. The archive creation ends up being a
waste of time and resource, especially for big applications and slow machines.
Since this option aborts the process prematurely, it behaves like the
-o,--nobuild option, i.e. any other option acting on later stages in the process
will be automatically discarded. For --noarchive, it means that in
$ makepkg --noarchive --install
the '--install' option does not do anything.
Signed-off-by: Pierre Neidhardt <ambrevar@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Previously, install_package() return code was either used as exit code or
ignored. This was rather confusing. The return code is now always ignored and a
comment on install_package() has been added.
Signed-off-by: Pierre Neidhardt <ambrevar@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Files hosted on kernel.org only provide signatures for the uncompressed tarball.
Support this scheme by transparently uncompressing the archives and piping
the data into gpg.
Signed-off-by: Allan McRae <allan@archlinux.org>
I noticed when I built a kernel package with options 'strip' and 'debug' that
the debug package was missing the debug information for the kernel modules.
This patch adds kernel modules to the targets for 'strip' and is compatible
with the split-out debug information packages.
v2: Correct logic error -- did a 'continue' after the 2nd-level case statement
instead of in the default case.
v3: Oops, forgot to terminate outer case. Ran this version through the test
suite and all tests passed.
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Allan McRae <allan@archlinux.org>
makepkg only aborts on errors during PKGBUILD functions so the remaining
"|| true" statements are unneeded.
Signed-off-by: Allan McRae <allan@archlinux.org>
It turns out that you should refer to variables by their actual name...
Introduced in commit a521cea9.
FS#38414.
Signed-off-by: Allan McRae <allan@archlinux.org>
If the user has "armor" in thier gpg.conf, makepkg will create an
ascii-armored signature. Use --no-armor in the gpg call to avoid.
FS#38503.
Signed-off-by: Allan McRae <allan@archlinux.org>
Forcing vim users to view files with a tabstop of 2 seems really
unnecessary when noet is set. I find it much easier to read code with
ts=4 and I dislike having to override the modeline by hand.
Command run:
find . -type f -exec sed -i '/vim.* noet/s# ts=2 sw=2##' {} +
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
Running 'makepkg -g' or 'makepkg' to download source files results in
different permissions on the files if the user has a non-default umask.
Put the umask definition at the "beginning" of the makepkg script to
ensure all files generated by makepkg have a 0022 umask.
Signed-off-by: Allan McRae <allan@archlinux.org>
Unify the formatting of the --help switch for pacman utils, if it exists.
All of the pacman utils will now output help text using the following
format:
util-name (pacman) v<pacman version>
one line description of util's purpose
Usage: util-name [options]
-b, --bar whatever --bar does
-f, --foo whatever --foo does
-h, --help display this help message
Reported-by: Karol Błażewicz <karol.blazewicz at gmail.com>
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
This commit:
-- replaces space-based indents with tabs per the coding standards
-- removes extraneous whitespace (e.g. extra spaces between function args)
-- adds missing braces for a one-line if statement
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
The call to bsdtar to check if a file needs extracted returns 1 if it does
not. We then propegate this return value accidentally which can cause
makepkg to report an error later on. Explicitly return 0 in this case.
Signed-off-by: Allan McRae <allan@archlinux.org>
It is fairly common that packages contain static libraries with no
shared counterpart. These should not be removed with !staticlibs.
Signed-off-by: Allan McRae <allan@archlinux.org>
It appears there are a lot of packages with arch=('i686 x86_64')
floating around. Quote the arch array when passing as a parameter
to detect such things.
Signed-off-by: Allan McRae <allan@archlinux.org>
Validate the new pkgver efore blindly ramming it into the PKGBUILD.
This gives us good feedback and prevents corrupting the PKGBUILD, e.g.
==> Starting pkgver()...
==> ERROR: pkgver is not allowed to contain colons, hyphens or whitespace.
==> ERROR: pkgver() generated an invalid version: a horse is not a pkgver
As an additional failsafe, exchange a valid for invalid character as
command separator in @SEDINPLACE@ expressions. For even more paranoia,
exit if sed fails for any reason.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This points makepkg to where is library is located. Can be
overridden by value in the environment.
Signed-off-by: Allan McRae <allan@archlinux.org>
[Ashley: Rebased]
Signed-off-by: Ashley Whetter <ashley@awhetter.co.uk>
The separation between downloading and extracting for non-vsc sources
was incomplete due to symlinks being made in $srcdir during the download
stage. Have download_{local,file} just ensure the presence of the files
in $startdir or $SRCDEST (downloading if needed) and then have
extract_file symlink these files into $srcdir.
Also replace "continue" with "return" in extract_file to make it clearer
what is happening.
Signed-off-by: Allan McRae <allan@archlinux.org>
These loops already maintain an independent loop counter, so cut out
the middle man. While this change doesn't necessarily require that we
drop support for sparse arrays, we do via this patch. A new lint check
is added in check_sanity to abort when a sparse array is encountered.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
These are all cases where we're reading filenames -- any backslashes
are intentional and should not be interpreted.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
With some simple math and printf formatting tokens, we can create the
whitespace necessary for this without the need for a loop and string
concatentation.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Unifying this list makes adding new algorithms easier. There's also
some menial cleanup in this patch to avoid use of eval and properly
treat lists of data as array instead of simple strings.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This allows for VAR=value and VAR+=value variable declarations.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
These references to bug numbers assume we will forever be using that bug
tracker. It is better to properly comment the code instead (which was
done in almost all cases anyway).
Signed-off-by: Allan McRae <allan@archlinux.org>
Replace spaces with tabs in one instance.
Remove extra spaces.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
Adding this restriction means we can filter any FILENAME entry from
starting with a "/" or a ".". Use the term "dot" as it is more
computing relevant compared to "full stop" or "period" which vary
depending on English locale.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add support for overriding configuration in /etc/makepkg.conf and
~/.makepkg.conf by setting the environment variable CARCH similar to
how SRCDEST and PKGDEST behave.
Fixes FS#35030.
Signed-off-by: Allan McRae <allan@archlinux.org>
Not having a package() function means all building occurs as root
and repackaging can lose permissions. Given the use of package()
functions has been around for years and we deprecated not having
one in pacman-4.1, we can remove support for PKGBUILDs without
package() functions altogether. However, keep PKGBUILDs that have
neither a build() or package() function working.
Signed-off-by: Allan McRae <allan@archlinux.org>
Using PKGBUILDs from stdin means that we can not use pkgver() in
packages. Given we have the "-p" option to pass any file to
makepkg and passing a PKGBUILD in the form "cat foo | makepkg"
does not work, this feature is unneeded.
Signed-off-by: Allan McRae <allan@archlinux.org>
If LOGDEST is set, we may not check that $startdir is writable. Store
the log pipe in LOGDEST instead.
Signed-off-by: Allan McRae <allan@archlinux.org>
bzr support "worked", but didn't handle any of the actual features we
wanted with makepkg. This moves the revision specification to the proper
place (extraction, rather than download), and fixes an additional broken
reference to $repo which was never set.
Fixes FS#35281.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This new option disables the prepare function. Useful in combination
with -o to get an unpatched copy of the sources for testing purpose.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
If stdout is already redirected, redirecting stderr to stdout can lead
to undesirable results.
Fixes FS#34974.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Copy SVN repos rather than using "svn export" to keep all anotation
files in the repo for build scripts that use (e.g.) "svin info".
Signed-off-by: Allan McRae <allan@archlinux.org>
Using the checkout directory for the SVN config can result in clashes
between config files and files from the SVN checkout. Instead, use
a ".makepkg" directory within the checkout.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add support for all bzr URLs, including "lp:" URLs, in the source array.
This, however, requires an internet connection and will fall back to the
current behavior for offline builds. In that case, only the URL reported
by 'bzr config parent_location' run inside the local repo can be used,
and is outputted.
Signed-off-by: Maxime Gauduin <alucryd@gmail.com>
remove_deps already has a check and won't run unless -r is specified, so
if this was meant to remove dependencies of a failure no matter what,
then it's not doing it, and with -r it is run twice on a failure for no
real reason.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
All those extra '\e[1;'s were just setting bold redundantly or
immediately being cancelled.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Bug exposed by a6291858cc
popd doesn't run in the for loop in download_sources() if the continue
in download_files is executed. Causing the extract_files to extract
everything into $SRCDEST instead of $srcdir
Signed-off-by: Allan McRae <allan@archlinux.org>
grep allows options to be set from the environment with GREP_OPTIONS.
Many of these options will alter grep's output, breaking makepkg.
GREP_OPTIONS=--line-number breaks installed dependency removal, for
instance.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
When VCS sources were updated, we changed into their root directory.
Any following source was then downloaded to an incorrect place causing
a failure in makepkg. Ensure we are always in the $SRCDEST directory
before starting any download.
Fixes FS#34488.
Signed-off-by: Allan McRae <allan@archlinux.org>
This reverts commit 8b03b1a877.
It is much better to download the submodules using separate source entries
and adjust the submodule configs to point at these versions in the
prepare() function.
See https://mailman.archlinux.org/pipermail/pacman-dev/2013-March/016771.html
for an example.
Signed-off-by: Allan McRae <allan@archlinux.org>
Because --noextract also implies to not download/verify source files, it wasn't
possible to simply do that, without either extracting and/or building.
(Note: --verifysource takes precedence over --noextract)
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Make all VCS download functions uses get_filename to get the repo name.
In addition, creating a working directory from a Bazaar repository now shows
the short-name of the repository, not the full path on disk.
I'm not sure if the name of the variable that holds the basename of the local
clone should still be `repo`, but I have left the variable name for simplicity.
Signed-off-by: Neer Sighted <neersighted@myopera.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Previously makepkg would clone vcs sources in the download function,
regardless of the noextract settings. Now the download_* functions only
download or update the vcs sources, and the new extract_* functions just
create working copies using the specified protocols. The extract_sources
function will call the needed extract function for the protocol
specified. The tarball extraction has also been moved into its own
extract_file function to keep things consistent.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Make makepkg use a recursive clone when creating the working directory.
This will initialize submodules
Signed-off-by: Allan McRae <allan@archlinux.org>
Supported by libarchive as of version 3.1.0 when compiled against lzo2
or in the presence of the lzop binary.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
In makepkg, passing -sr --needed causes there to be a conflict when
pacman goes to remove the dependencies, as the --needed flag is not an
option for pacman -R. This patch makes --needed not get added to the
PACMAN_OPTS array, but it acts like ASDEPS, and is only added to an
install function.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The idea of having separate build() and package() functions is that
build() is run as a normal uses and package() as (fake)root. Any
files placed in $pkgdir during build() can have the wrong permissions.
Restrict access to $pkgdir during build() - unless there is no package()
function.
Also, set $pkgdir to something "useful" during build(). For split
packages, this uses "<path>/pkg/$pkgbase" because it is not obvious
which $pkgdir is being referred to.
Signed-off-by: Allan McRae <allan@archlinux.org>
Rearrange tidy_install so we first remove docs, unwanted files,
libtool files, and empty directories. Then check for missing backup
files and references to $srcdir and $pkgdir. Finally compress manpages,
strip debug symbols, and compress executables with upx.
Fixes FS33318
Signed-off-by: Chirantan Ekbote <chirantan.ekbote@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The difference between the echo and the printf's in write_pkginfo seemed
to be somewhat sporadic. Also, the INFAKEROOT check was doing the same
exact thing as the SPLITPKG check, but formatted much differently and
consuming two extra lines. I think this makes it more readable than it
was previously, if nothing else.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
When building sources with a pkgver function, makepkg will print out the
original version before pkgver() is run, claiming that that is the
package that will be built. This patch simply re-prints the output
later, after pkgver() has been run so people can see which package they
are actually building.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Amazingly, using "sleep 1" to convince btrfs to report correct file
sizes is only a 90% fix. Sometimes more sleep is needed.
Instead we use the --apparent-size argument to du to get actual file
sizes. This is used only on Linux as the various BSDs do not support
this argument.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add an mtree file to the package with all file information. This
can be added to the local pacman database on install allowing full
package verification.
Signed-off-by: Allan McRae <allan@archlinux.org>
Places logs in a pre-defined location. The logs are always neatly
labeled with package names and numbers, and this way can be more easily
sent to network shares as they are written or compressed/cleaned en
masse.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Specifically, we shouldn't allow newlines in the pkgdesc field, as
pacman will ignore the continuation and end the description prematurely
as written to the local DB. Normalize ALL whitespace, replacing it with
single whitespace characters.
Fixes strange errors as seen by FS#32852.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Although it should be currently quite obvious what package is being
created when "Creating package..." is printed, it will not be in the
future when a debug package is potentially created too. Also, given
$pkgname is always correctly set when split packaging now, we no
longer need to pass that around.
Signed-off-by: Allan McRae <allan@archlinux.org>
When using the "debug" option in combination with "strip", move the
debugging symbols into a separate directory ($pkgdir-debug/usr/lib/debug)
suitable for creating a package from.
Create hardlinks between debugging symbols of hardlinked files and add
symlinks in the .build_id directory if the binary has a build ID.
Signed-off-by: Allan McRae <allan@archlinux.org>
Unify split and single packages to always use a folder within pkg/
as thier $pkgdir. This will allow a folder for storing a package with
stripped debug symbols to be added within pkg/ too.
Signed-off-by: Allan McRae <allan@archlinux.org>
Move stripping of files to a spearate function that will be expanded
for the handling of creating debug symbol packages.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a "debug" option that appends the compiler flags specified in the
variables DEBUG_CFLAGS and DEBUG_CXXFLAGS in makepkg.conf to their
counterpart buildflags.
Signed-off-by: Allan McRae <allan@archlinux.org>
When using "makepkg -R" without a packge function, we should still
run tidy_install as the user might have added other packaging options
such as (e.g.) '!emptydir' to remove empty directories on repackaging.
Of course we can not revert some options when repackaging without a
package function.
Signed-off-by: Allan McRae <allan@archlinux.org>
Simply add the option to pass the --needed flag to pacman when using -i
with makepkg. When using makepkg in scripts, particularly for git
packages with the new version functions and not just a date, this can
save disk io and time instead of reinstalling.
This would mostly be useful with the --noconfirm option.
Signed-off-by: wgiokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Most of makepkg already uses sentence case. This cleans up the last few
stragglers.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
After we install dependencies, we source /etc/profile so that new
elements get added to the path. As this can override any local setting
of PATH, we store the full path of the PACMAN variable passed to makepkg.
Also, add a check for PACMAN availability if it is needed to deal with any
dependency operations.
Reported-by: Martin Panter <vadmium à gmail·com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This resolves an inconsistency with how the $PACMAN variable was interpreted.
Previously “makepkg” would extract the first word from the $PACMAN variable
and check that it existed as a command. This appears to have been happening
ever since the variable was implemented in revision 66c6d28 (makepkg: allow
to specify an alternative pacman command). Thus it looks like command
arguments were originally allowed in the variable.
However the run_pacman() function now quotes $PACMAN, so the whole variable
has to be just the command name. This quoting was introduced more recently,
perhaps in revision 622326b (makepkg: fix sudo/su calling of pacman).
Signed-off-by: Allan McRae <allan@archlinux.org>
The package() function has been around since pacman-3.3 and has
significant advantages including limited fakeroot usage and correct
repackaging. The ability to use PKGBUILDs without a package function
will be removed in a future release.
Signed-off-by: Allan McRae <allan@archlinux.org>
There are valid reasons for a source files PGP signature to be changed
(expired key, expired signature, additional person signing...). Thus
providing a checksum for signature files can potentially cause a
PKGBUILD to require unnecessary updating.
Avoid this issue by using "SKIP" for the signature checksum.
Fixes FS#31590.
Signed-off-by: Allan McRae <allan@archlinux.org>
Using the last match in the BUILDENV and OPTIONS arrays allows the
user to easily override these values without specifying the entire
array. For example add "BUILDENV+=(sign)" in ~/.makepkg.conf.
Fixes FS#26701.
Signed-off-by: Allan McRae <allan@archlinux.org>
The list of which download protocol should look in makepkg.conf for the
download agent was hard coded into makepkg. Instead, fallback to checking
the the download agents array for any non-local or (implemented) vcs
source.
Signed-off-by: Allan McRae <allan@archlinux.org>
* For any vcs other that git, the fall through resulted in being handled by the
code for std url, hence fragments were being left on.
* Handle vcs urls than end in a slash correctly, eg http://example.com/project/
Signed-off-by: Gary van der Merwe <garyvdm@gmail.com>
Before this patch, makepkg does not check if $dir is a local clone of
the right repo.
For example, git fetch would be run even if $dir is not a local
bare clone of a git repo in present in source(), but a subdir of
a checked-out one. That means makepkg can potentially fetch from
a completely unrelated remote and update completely unrelated
dirs/files.
This patch adds a check to make sure we are fetching from the right
remote.
Signed-off-by: Mohammad Alsaleh <msal@i2pmail.org>
Before this patch, makepkg would only check if $dir exists as an
indication that a local clone exists. And if $dir does exist, makepkg
will run git fetch inside it unconditionally.
After applying this patch, makepkg will check if the existent $dir is
empty. And if it is, it will be used to store a local clone.
Signed-off-by: Mohammad Alsaleh <msal@i2pmail.org>
Three warnings after someone deliberately typed --noextract is a
tad excessive... Also, an empty $srcdir is perfectly valid when
the source array is empty, although using --noextact then is
wasteful.
Signed-off-by: Allan McRae <allan@archlinux.org>
Rather than calling upon ls for this, use a proper shell function which
uses globbing to determine the existance of files in a directory.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
If a pkgver() function is specified, delay checking the package is
built until the pkgver is updated..
Signed-off-by: Allan McRae <allan@archlinux.org>
Do not update VCS sources if --holdver is used. If the VCS checkout
is not present, it will still be downloaded.
Signed-off-by: Allan McRae <allan@archlinux.org>
VCS sources are not needed for --geninteg or --source operations.
This also prevents VCS downloads outputting to stdout, which
prevented piping -g output to the PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
Allow SVN repo sources in the form:
source=("<folder>::<repo>#<fragment>")
where <repo> must start with svn (e.g svn+http://) and a <fragment>
can specify a revision (e.g. revision=22).
Signed-off-by: Allan McRae <allan@archlinux.org>
Now that VCS repos are provided in the source array, it becomes too
complicated to have automatic updating pkgver as was the case with
the old VCS PKGBUILDs (there can be multiple repos of different types
in the source array, the VCS repo may not be the package primary
source, etc).
Instead provide an optional way for a PKGBUILD to update the pkgver
value through the specifing of a pkgver() function that returns the
new version string. This is run after all source files are downloaded
so can access the VCS repo if needed.
Signed-off-by: Allan McRae <allan@archlinux.org>
With VCS sources, get_filepath should return the directory of the
checkout. This allows backing up of the VCS checkout when using
--allsource. Fixes FS#21098.
Signed-off-by: Allan McRae <allan@archlinux.org>
Modify get_filename to return the name of the folder with VCS sources.
This fixes output issues in checksum checking.
Signed-off-by: Allan McRae <allan@archlinux.org>
