This had the unfortunate implementation detail that depended on the
strings having 1 byte == 1 column hold true. As we know, this is not at
all the case once you move past the base ASCII character set.
Reimplement this whole thing so it doesn't depend on format strings at
all. Instead, simply calculate the max column widths, and then when
displaying each row add the correct amount of padding using UTF-8 safe
string length functions.
Before:
名字 旧版本新版本 净变化 下载大小
libgee 0.6.2.1-1 0.60 MiB 0.10 MiB
libsocialweb 0.25.19-2 1.92 MiB 0.23 MiB
folks 0.6.3.2-1 1.38 MiB 0.25 MiB
After:
名字 旧版本 新版本 净变化 下载大小
libgee 0.6.2.1-1 0.60 MiB 0.10 MiB
libsocialweb 0.25.19-2 1.92 MiB 0.23 MiB
folks 0.6.3.2-1 1.38 MiB 0.25 MiB
Signed-off-by: Dan McGee <dan@archlinux.org>
We have a few incomplete translations, but these should be addressable
before the 4.0.1 maint release that is surely not that far in the
future.
Signed-off-by: Dan McGee <dan@archlinux.org>
Our error message used to be very unclear when the configuration file
could not be found:
$ ./pactree -lsr gtk
error: failed to register sync DBs
Instead, display an accurate message and include the file name:
$ ./pactree -lsr gtk
error: config file /usr/local/etc/pacman.conf could not be read
Also, move the error message inside register_syncs() to allow for
differentiating between different errors that might require a handler in
the future.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows for specifying an alternate configuration file path, similar
to pacman's "--config" option.
Given that there is currently no other way to tell pactree to read from
another configuration file (except for patching or symlinking), this
seems totally sensible - even if there are plans to refactor and/or
replace the standalone configuration file parser.
We do not define a short option for the sake of consistency with
pacman's set of command line options.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
Printing all of "Installed", "Removed" and "Net Upgrade" sizes is
redundant as the difference of the first two is the last. Instead,
only print "Installed Size" and "Net Upgrade Size" when both the
installed and removed are non-zero.
This results in the following output in the following cases:
- package installation only: Installed Size
- package removal only: Removed Size
- package installation involving replacement: Installed + Net Upgrade Size
- package upgrade: Installed + Net Upgrade Size
- combination upgrade and installation: Installed + Net Upgrade Size
Download Size remains outputted whenever something is downloaded.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Printing "[removal]" beside all package names is redundant when all
packages are being removed (i.e. when using -R).
Signed-off-by: Allan McRae <allan@archlinux.org>
This also fixes a memory leak and makes the dual-purpose "rows" variable
go away in favor of storing the rows and non-verbose names separately.
This also fixes some potential memory leaks and/or wrong behavior due to
the config->verbosepkglists flag being flipped, which we should never be
doing.
Signed-off-by: Dan McGee <dan@archlinux.org>
The prompt can be rather confusing otherwise when all files have already
been downloaded, but there is not a single total size listed.
Signed-off-by: Dan McGee <dan@archlinux.org>
Better scoping of variables for the most part, and ensure we are using
string_length() and not strlen() as appropriate. Also refactor the
longest cell code to call string_length() a lot less; by simply using an
array of max sizes we don't have to recompute values nearly as much.
Signed-off-by: Dan McGee <dan@archlinux.org>
For getcols(), the functions we call return a value of type 'unsigned
short', so it makes sense for us to do the same.
string_length() is meant to behave like strlen(), so it should return
type size_t. This exposes other functions such as indentprint() which
should also be using signed return types.
Signed-off-by: Dan McGee <dan@archlinux.org>
We now label the old 'Size' column as 'Net Change' to reflect the
reality of what we are looking at. Sync operations now get an additional
'Download Size' column.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to sort the output list by showing all pulled
dependencies first, followed by the explicitly specified targets.
Signed-off-by: Dan McGee <dan@archlinux.org>
* All errors now go to stderr, so do the same here and simplify the
writing of the error message.
* Add SIGHUP to the handled signal list, and don't repeat code.
* Attempt to release the transaction (e.g. remove the lock file)
for all of HUP, INT, and TERM. Signals HUP and INT respects
transaction state, TERM will immediately terminate the process.
Signed-off-by: Dan McGee <dan@archlinux.org>
Because we aren't using gpgv and a dedicated keyring that is known to be
all safe, we should honor this flag being set on a given key in the
keyring to know to not honor it. This prevents a key from being
reimported that a user does not want to be used- instead of deleting,
one should mark it as disabled.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is for eventual use by the PGP key import code. Breaking this into
a separate commit now makes the following patches a bit easier to
understand.
Signed-off-by: Dan McGee <dan@archlinux.org>
pm_asprintf() does not return a length as asprintf() does. Fail. Make
sure it is not -1 as that is the only failure condition.
Signed-off-by: Dan McGee <dan@archlinux.org>
This takes the libraries hidden default out of the equation: hidden in
the sense that we can't even find out what it is until we create a
handle. This is a chicken-and-egg problem where we have probably already
parsed the config, so it is hard to get the bitmask value right.
Move it to the frontend so the caller can do whatever the heck they
want. This also exposes a shortcoming where the frontend doesn't know if
the library even supports signatures, so we should probably add a
alpm_capabilities() method which exposes things like HAS_DOWNLOADER,
HAS_SIGNATURES, etc.
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm_list_count() returns size_t, which we should use to store the
result since it is easy enough to format for printing.
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds a some new callback event and progress codes for package
loading, which was formerly bundled in with package validation before.
The main sync.c loop where loading occurred is now two loops running
sequentially. The behavior should not change with this patch outside of
progress and event display; more changes will come in following patches.
Signed-off-by: Dan McGee <dan@archlinux.org>
Do this outside the loop to prevent the message from being displayed
(and pluralized!) for each individual package.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
None of these are hot-code paths, and at least the target reading has
little need for an arbitrary length limitation (however crazy it might
be to have longer arguments).
Signed-off-by: Dan McGee <dan@archlinux.org>
There is no need to print them into buffers; we can use the values
returned by gettext() directly without issue.
Signed-off-by: Dan McGee <dan@archlinux.org>
Display now looks like this, whereas before we would have just showed
'2M/s' for the extra repository download. The cutoff is placed at 100.0
to ensure we only use 4 character slots of width (e.g. '99.9', '100').
:: Synchronizing package databases...
testing 39.9 KiB 470K/s 00:00 [######################] 100%
core 51.4 KiB 469K/s 00:00 [######################] 100%
extra 768.8 KiB 2.1M/s 00:00 [######################] 100%
community-testing 1941.0 B 54.4M/s 00:00 [######################] 100%
multilib 26.6 KiB 458K/s 00:00 [######################] 100%
community 449.8 KiB 1649K/s 00:00 [######################] 100%
Signed-off-by: Dan McGee <dan@archlinux.org>
This will be the first thing printed when doing an upgrade. Currently
there is no output at all until we start resolving dependencies, which
can be a while in if specifying very large targets on the command line,
in which case it is nice to let the user know we are doing something.
Addresses FS#25822 in the most KISS way possible.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't need to keep track of how many files are in a package now that
said value is provided to us. It also makes more sense to use size_t
here for types rather than the (hopefully never too short) int.
Signed-off-by: Dan McGee <dan@archlinux.org>
Put all the callback stuff in alpm.h in one spot, and make the following
renames for clarity with the new structure:
ALPM_TRANS_EVT_* --> ALPM_EVENT_*
ALPM_TRANS_CONV_* --> ALPM_QUESTION_*
ALPM_TRANS_PROGRESS_* --> ALPM_PROGRESS_*
alpm_option_get_convcb() --> alpm_option_get_questioncb()
alpm_option_set_convcb() --> alpm_option_set_questioncb()
Signed-off-by: Dan McGee <dan@archlinux.org>
This was just disgusting before, unnecessary to limit these to only
usage in a transaction. Still a lot of more room for cleanup but we'll
start by attaching them to the handle rather than the transaction we may
or may not even want to use these callbacks.
Signed-off-by: Dan McGee <dan@archlinux.org>
