When libalpm asks the user a question, there are two possible defaults.
One default for pacman (used when the user presses enter without typing
and for --noconfirm) and the libalpm default. Currently the libalpm
default gets used for the pacman "--print" option. This affects the
printing of ignored packages since the defaults differ for
"ALPM_QUESTION_INSTALL_IGNOREPKG". Adjust the response of this case when
using --print so pacman acts consistently.
Signed-off-by: Connor Behan <connor.behan@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
size went from off_t in _display_targets to int in
add_transaction_sizes and back to off_t in humanize_size
leading to potential overflows.
Fixes FS#34616.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Using white made important text invisible on terminals with white
backgrounds.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Be complete with files listed. Comment out files where code is used
or heavily based on other projects so will never have translatable
strings.
Signed-off-by: Allan McRae <allan@archlinux.org>
I imported this translation from transifex without realising that there
was no strings translated despite being "acitve" on transifex for quite
some time. Remove it until translation begins...
Signed-off-by: Allan McRae <allan@archlinux.org>
We should save the current locale, use the 'C' locale during parsing,
then restore the original locale. Config files should always parse
regardless of the current user's locale setting. Fixes FS#34253.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Quoting output substitutions makes whitespace errors such as FS#30101
much more obvious:
old:
missing perl-test-pod dependency for perl-test-output
new:
missing 'perl-test-pod ' dependency for 'perl-test-output'
Several of the quoted substitutions should not be capable of containing
whitespace in theory, but this errs on the side of caution as the point
of the tool is to find error conditions.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Passing the local package list to alpm_checkdeps as both the local
packages and packages to be upgraded did nothing but cause extra
overhead as the packages were all removed from the installed package
list because they were being upgraded.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently pacman either prints 'adding' or 'upgrading' when installing
a package. This make pacman print and log the other possible actions:
'downgrade' and 'reinstall'
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
colstr_t colstr will hold the colourizing agents.
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Colours can be enabled in two ways:
- Add Color to pacman.conf. This enables colours automatically.
- Use --color=WHEN where WHEN is none/auto/always.
WHEN as 'never' disables colours (overrides config file), as 'auto'
enables colours when stdout is a tty, and 'always' enables colours no
matter what.
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Remove the format component of the "Total Download Size" and related
messages. The heading will be colourized, the size won't.
However since the length of these messages can vary by language, we need
a pretty printer to format them nicely.
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Basically all translation messages that need colouring but _also_ happen
to be format strings need to be split up.
This makes it easy to conditionally embed colour codes into the output
at runtime.
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This will substantially simplify the logic to add colours to messages.
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Pacman currently bails when trying to extract a file over a directory
when using --force. Instead of ignoring all conflict, perform the
check and skip any file-file conflicts. Conflicts between directories
and files are still flagged and cause the transation to abort.
As a bonus, we now know about files changing packages when using
--force, so we can skip removing them fixing upgrade046.
Signed-off-by: Allan McRae <allan@archlinux.org>
Fixes all clang warnings with -Wformat-literal.
Also, fix genuine formating issue discovered once adding these attributes
and add a cast to prevent a gcc warning.
Signed-off-by: Allan McRae <allan@archlinux.org>
Keys used to create signatures are checked for presence in the keyring
before package validation is performed.
Signed-off-by: Allan McRae <allan@archlinux.org>
Conflicts:
lib/libalpm/alpm.h
Signed-off-by: Allan McRae <allan@archlinux.org>
This prevents multiple spaces between values from being
parsed as empty values.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Add LocalFileSigLevel and RemoteFileSigLevel to control the signature
checking for "pacman -U <file>" and "pacman -U <url>" operations
respectively. The starting value for both these options is SigLevel,
if it is specified in the [options] section, or the built-in system
default. The specified values override and/or supplement this initial
value. Note there is no distinction between setting "Required" and
"PackageRequired" as there are no database options for Upgrade
operations.
Signed-off-by: Allan McRae <allan@archlinux.org>
We still call some of these 'deprecated' methods elsewhere, so this
shouldn't present a problem. When we decide 2.x support is to be dropped,
we should update all of the code to not call deprecated methods.
Allan: Adjusted with respect to previous patches adding libarchive
compatibilty layer.
Signed-off-by: Allan McRae <allan@archlinux.org>
Also fix a small bug where pacman won't check if the sync dbs are first
downloaded when invoked with --native (it should).
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
prefix defaults to "UNKOWN" if null or an empty string is provided.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Teach pacsort to understand package filenames and optionally strip away
some of the context. alpm_pkg_vercmp() intentionally only understands
pure versions, so strings such as '18.0-2-x86_64' and '18.0.1-1-x86_64'
will be compared wrongly.
Partially addresses FS#33455.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
The restriction of not checking the ownership of a directory is
unnecessary given that all the package filelists contain this
information. Remove this restriction, with the expectation that you
might get multiple packages returned for a given directory.
Additionally attempt to minimise the number of files getting through
to the slow realpath call.
Original-work-by: Dan McGee <dan@archlinux.org>
Original-work-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
There is duplicated code in the util.c files in the libalpm and pacman
source code. Split this into a separate file so that it can be shared
via a symlink. This prevents code divergence between the two code bases.
Also, move mbasename and mdirname from pacman/util.c into util-common.c
in preparation for the following patch that uses them to add an extension
to pacsave files.
Signed-off-by: Allan McRae <allan@archlinux.org>
If we are reversed, then we were correctly freeing both the list and the
contained data. However, we were leaking a list in the case of a
non-reversed traversal.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
A properly formatted mtree file may stick a leading "./" in front
of file names in the root directory. Strip this if present.
Signed-off-by: Allan McRae <allan@archlinux.org>
Bail early in file validation checks if the file type given in the
mtree file does not match that in the filesystem.
Signed-off-by: Allan McRae <allan@archlinux.org>
The "install" and "changelog" entries for a package in the local
database are now checked for changes with -Qkk.
Signed-off-by: Allan McRae <allan@archlinux.org>
The follow fields are checked:
Directory: uid, gid, mode
File: uid, gid, mode, size, time
Symbolic Link: uid, gid, mode, link, time
A skeleton is added for checking a files md5sum and sha256sum when
reading this information is supported by libarchive.
Signed-off-by: Allan McRae <allan@archlinux.org>
If a package has an mtree file, using pacman -Qkk will read that
file and use it to perform more in depth package checking.
Currently this only checks for file presence.
Signed-off-by: Allan McRae <allan@archlinux.org>
There is going to be a lot of overlap in the code for the quick
and full checks that can be abstracted into their own functions.
Also many other file checking functions will be needed for the
full check. Put all these in a separate source file.
Signed-off-by: Allan McRae <allan@archlinux.org>
When a configured repo database is not already downloaded, a warning
message such as "warning: database file for 'testing' does not exist"
is printed. Disable this warning when the database is scheduled to
be downloaded in the transaction.
Signed-off-by: Allan McRae <allan@archlinux.org>
When a packages (new) optdepends are printed in install (update),
add a note of their current installation status. Packages currently
installed are labelled with [installed] and packages to be installed
in this transaction are labelled [pending].
Signed-off-by: Allan McRae <allan@archlinux.org>
Much like packages that require a give package are displayed in the
"Required by" field of its information output, alos display packages
that optionally require the package.
Inspired-by: Benedikt Morbach <benedikt.morbach@googlemail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
When a package is being removed, provide a notification (via a callback)
if any local package requires it as an optdepend.
Signed-off-by: Allan McRae <allan@archlinux.org>
Removing the leader for the toplevel package shifted the name left
but not it's limb.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Ensure that both output formats have equal spacing, and therefore an
equivalent layout. This change also removes the styling from the
toplevel package being searched for.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Stick to c89 and avoid mixed code and declarations, and always brace
block statements, even if they're only 1 line.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a compile time check for langinfo.h so that we can possibly use
unicode line drawing characters if the current locale is supportive of
them. This can be explicitly disabled at runtime with the use of a new
switch: -a, --ascii.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
The long --sync options has apparently never worked.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This is redundant, and any usage of -D should belong to CPPFLAGS.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Since commit d2669b47, CFLAGS specified on the command line haven't been
respected at all, resulting in no optimization being applied to builds.
This exposed one warning flag issue in some new code, which is also
fixed here.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
When the len and cidx were changed to size_t in a8a1b093, it was
possible to have an integer overflow when a line ended right at the
edge of the terminal width.
Signed-off-by: Allan McRae <allan@archlinux.org>
Returning "/" from mdirname removes it as a special case which allows us to
test it like any other directory. This corrects a false positive when querying
a file in / and root is not set to /.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Trailing '/' in paths causes lstat to dereference symlinks to
directories which causes it to break even though the symlink is a valid
target.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Resolving root early prevents later calls to realpath from having to do the
work of actually resolving any symlinks in root.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
resolve_path is a equivalent to calling realpath(path, NULL) except that the
returned string is guaranteed to be PATH_MAX long. We never append to the
returned string, so this is unnecessary.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Currently, the package description is printed at the end of the -Si output.
This is probably one of the more important pieces of information so should
be nearer the top. Also move the package architecture up.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When cleaning the cache, ask for each cachedir separately.
Allan: add some white space in output
Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Make an array out of our various glob skip patterns and loop through
them looking for items to skip. Additionally, when doing a full clean,
delete all objects rather than respect this skip list.
Signed-off-by: Dan McGee <dan@archlinux.org>
