Rework the frontend and backend to allow passing a ratio value in for
UseDelta rather than having a hardcoded #define-d 0.7 value always used.
This is useful for those with fast connections, who would likely benefit
from tuning this ratio to lower values; it is also useful for general
testing purposes.
The libalpm API changes for this, but we do support the old config file
format with a no-value 'UseDelta' option; in this case we simply use the
old default of 0.7.
We clamp the ratio values to a sane range between 0.0 and 2.0, allowing
ratios above 1.0 for testing purposes.
Signed-off-by: Dan McGee <dan@archlinux.org>
This removes the hack I added to skip '*.sig' files earlier since there
are other files that also fall into the same bucket- source packages
from `makepkg --source`, delta files, etc. Rather than prompting for
each and every one, simply skip them. Doing '-Scc' rather than '-Sc'
will delete these files if that is really what you want to do.
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 43cad9c8 made the building of all docs depend on the Makefile.
However, the Makefile is generated after running ./configure so is
always newer than any pregenerated docs. This means that people
building from released pacman tarballs are forced to rebuild the
docs (and thus have asciidoc installed). That defeats the purpose
of prebuilding the documentation. Have the documentatin depends on
Makefile.am instead as this is probably what was intended.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Using the value of "SKIP" in the checksum array will cause that
integrity check to be skipped. This makes building packages that
rely on user configurable sources less painful.
Based-on-patch-by: Dan McGee <dan@archlinux.org>
Based-on-patch-by: David Campbell <davekong@archlinux.us>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This converts our script generation to use the built-in AM_V_GEN macro,
which honors the V= setting passed to make and allows one to see the
full command if they truly desire. The AM_V_at macro is also used in
place of an explicit @ so verbose-mode compiles show all commands being
run.
We can also use these two macros in doc generation to quiet it down to
the level we expect.
Other minor changes:
* a pointless test call is removed in test/pacman/tests/
* sed is used instead of dos2unix as we depend on it anyway
* consecutive chmod calls are reduced to a single call (e.g., '+x,a-x')
Signed-off-by: Dan McGee <dan@archlinux.org>
Add support for overriding configuration in /etc/makepkg.conf and
~/.makepkg.conf by setting the environment variable PACKAGER similar to
how SRCDEST and PKGDEST behave.
Signed-off-by: Allan McRae <allan@archlinux.org>
Commit e7b56f48 allowed makepkg to handle pgp signatures with the
.sign extension. Update the man page to reflect this.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is work originally provided by Sascha Kruse on FS#20360 with only
minor adjustments to the implementation. It's been expanded to cover:
NoUpgrade, NoExtract, IgnorePkg, IgnoreGroup.
Adds tests ignore008, sync139, sync502, and sync503.
Also satisfies FS#18988.
Original-work-by: Sascha Kruse <knopwob@googlemail.com>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This is not something that should be used on a frequent basis, and
giving it a short option encourages use without making the drawbacks
obvious. For the 1% of situations that require it, the 5 extra
keystrokes are a fair price to pay.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Make all docs depend on Makefile; if we change flags here we want them
rebuilt.
* Add explicit filenames to .gitignore so we can add our own CSS
override file, and add an asciidoc-override.css resource.
* Adjust a few asciidoc options when generating HTML.
* Remove asciidoc-manpage.css; apparantly this doesn't exist anymore.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows it to serve double-duty. In order to allow users to base
verification decisions off of both a valid signature and a trusted
signature, we need to assign some level of owner trust to the keys we
designate as trusted on import.
Signed-off-by: Dan McGee <dan@archlinux.org>
* --import now only imports keys from pubkey.gpg and does not import
owner trust; if you want to have both simply run the operations in
sequence.
* --import-trustdb has been simplified; it will overwrite existing
values in the trust database as before, but there is no need to export
it first as those values are safe if left untouched.
* Fix the manpage referring to a non-existent option.
Signed-off-by: Dan McGee <dan@archlinux.org>
A few parameters were outdated or wrongly named, and a few things were
explicitly linked that Doxygen wasn't able to resolve.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is similar to the 'foo-revoked' file we had. This will be used to
inform the user what keys in the shipped keyring need to be explicitly
trusted by the user.
A distro such as Arch will likely have 3-4 master keys listed in this
trusted file, but an additional 25 developer keys present in the keyring
that the user shouldn't have to directly sign.
We use this list to prompt the user to sign the keys locally. If the key
is already signed locally gpg will print a bit of junk but will continue
without pestering the user.
Signed-off-by: Dan McGee <dan@archlinux.org>
We're putting the cart ahead of the horse a bit here. Given that our
keyring is not one where everything is implicitly trusted (ala gpgv),
keeping or deleting a key has no bearing on its trusted status, only
whether we can actually verify things signed by said key.
If we need to address this down the road, we can find a solution that
works for the problem at hand rather than trying to solve it now before
signing is even widespread.
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes build errors when performing a manual install straight to a
filesystem where the files already exist.
Reported-by: Sergej Pupykin <ml@sergej.pp.ru>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This also renames '--receive' to '-recv-keys' to match the wrapped gpg
option name, rather than invent a new one, now that the calling
convention is the same.
Signed-off-by: Dan McGee <dan@archlinux.org>
We were using the mystical [<foobar>] options which is some sort of
cross between a <required> argument and an [optional] one. Remove this
madness and do some other general cleanup/consistency work in the
manpage.
Signed-off-by: Dan McGee <dan@archlinux.org>
The HoldKey option was undocumented and was not suited for pacman.conf.
Instead use the file "/etc/pacman.d/gnupg/heldkeys" to contain a list
of keys not to be removed from the pacman keyring with the --populate
option.
Signed-off-by: Allan McRae <allan@archlinux.org>
The current --reload option, apart from being non-clear in its naming,
is very limited in that only one keyring can be provided. A distribution
may want to provide multiple keyrings for various subsets of its
organisation or custom repo providers may also want to provide a keyring.
This patch adds a --populate option that reads keyrings from (by default)
/usr/share/pacman/keyrings. A keyring is named foo.gpg, with optional
foo-revoked file providing a list of revoked key ids. These files are
required to be signed (detached) by a key trusted by pacman-key, in
practice probably by the key that signed the package providing these
files. The --populate flag either updates the pacman keyring using all
keyrings in the directory or individual keyrings can be specified.
Signed-off-by: Allan McRae <allan@archlinux.org>
We had this interesting set of facts conundrum, according to vercmp
return values:
2.0a < 2.0
2.0 < 2.0.a
2.0a == 2.0.a
This introduces a code change that ensures '2.0a < 2.0.a' as would be
expected by the first two comparisons. Unfortunately this stays us a bit
further from upstream RPM code, but those are the breaks (in RPM, the
versions involving 'a' do in fact compare the same, but they are both
greater than the bare '2.0').
Signed-off-by: Dan McGee <dan@archlinux.org>
Add the info that versioned replaces are now supported, as well as
beefing up some of the other places touching on versioned fields.
Signed-off-by: Dan McGee <dan@archlinux.org>
makepkg --source is a often used go make source package like for AUR.
Have a -S shortcut will save the world.
Signed-off-by: Sebastien Luttringer <seblu@seblu.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
We had this gem:
⇐ (less than or equal to)
Due to not ensuring we did literal printing of things like this. Fix it
and a few other problems noticed scanning through both the HTML and
manpage generated files.
Signed-off-by: Dan McGee <dan@archlinux.org>
* .mailmap: add mapping for Dave's two email addresses.
* AUTHORS: clear out file, tell people to use `git shortlog -s` instead.
* doc/footer.txt: "promote" Dave, put Xavier and Nagy in past contributors.
Signed-off-by: Dan McGee <dan@archlinux.org>
These are equivalent. Use the autoconf macro for consistency.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This applies to the repo-remove man page as well as the script itself.
Yes Dan, I ran distcheck afterwards.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is somewhat of a dangerous option with limited use cases. Don't
advertise it as an easily accessibly option.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Trivial to implement as the same backend machinery is used anyway.
Document it and add it to the accepted options.
Signed-off-by: Dan McGee <dan@archlinux.org>
This closely matches what we had before for -R --recursive. Basically,
when specifying a target (e.g., pacman), we can now recursively pull all
dependencies, regardless of version specifiers and whether they are
already satisfied in the local database. This could be used to update
pacman on a system with an old glibc, for example, as both pacman and
glibc would get pulled into the transaction.
This is most useful with --needed to prevent needless reinstalls as
described in the man page changes.
The end goal of this change is to wire it into SyncFirst and have it be
the default mode of operation there, but that belongs in a separate
changeset.
Signed-off-by: Dan McGee <dan@archlinux.org>
The format required for selection of packages within the group selection
dialog is not entirely obvious, so provide some documentation.
Fixes FS#24134.
Signed-off-by: Allan McRae <allan@archlinux.org>
(cherry picked from commit 94d22f9309)
This adds docs for SigLevel, which can exist in both [options] and
[repository] sections. It also does a bit of reworking of the structure
of this manpage and adds a labeled list under the repo sections where we
didn't have one before.
Signed-off-by: Dan McGee <dan@archlinux.org>
The current --list option outputed the keys and all their signatures
which can be overly verbose. It also did not take a list of keys on
the command line to limit its output (although the code suggests that
was intended).
That patch brings consistency with gpg, providing --list-keys and
--list-sigs options that function equivalently to those provided by
gpg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This gets us close to using the same modeline in all files we run
through Asciidoc, as well as adding the spell and spelllang
declarations, just as we had in NEWS already.
The choice of 'en_us' is mainly for consistency and because the body of
work already uses these spellings.
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently, pacman-key allows the user to import their keys using the --add
option. However, no similar functionality exists for importing ownertrust
values.
The --import-trustdb option takes a list of directories and imports ownertrust
values if the directories have a trustdb.gpg database.
The --import option takes a list of directories and imports keys from
pubring.gpg and ownertrust values from trustdb.gpg. Think of it as a combination
of --add and --import-trustdb
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allows the skipping of all integrity checks (checksum and PGP) or
either the checksum or PGP checks individually.
Original-patch-by: Wieland Hoffman <theminew@googlemail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Many projects provide signature files along with the source code
archives. It's good to check these, too, when verifying the integrity
of source code archives.
Not everybody is using gpg so the verification can be disabled with
--skippgpcheck.
Additionally, only a warning is displayed when the key that signed the
source file is unknown.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We can override pkgver and pkgrel so it is only logical to add epoch
to that list
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add an --init option that ensures that the pacman keyring has all
the necessary files and they have the correct permissions for being
read as a user.
Signed-off-by: Allan McRae <allan@archlinux.org>
Update man page to reflect current options. Also add a description
on how to manually interact with the pacman keyring with gpg.
Signed-off-by: Allan McRae <allan@archlinux.org>
It was a bit unclear that both pkgver and pkgrel were included in the
passed version strings; clarify this fact in the manpage. Also include
epoch in the mix now that it exists.
Also make two other minor consistency touchups to code-print variables
in text.
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds the '.tar.Z' option to both repo-add and makepkg for no other
reason than "why not", and because bsdtar supports it natively with the
'-Z' flag. Also update the documentation accordingly.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a fairly useless feature given all it does is an "rm" on a
directory. It is also unlikely that you would want to remove the
entire SRCDEST anyway, but rather just the old files.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The format required for selection of packages within the group selection
dialog is not entirely obvious, so provide some documentation.
Fixes FS#24134.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a BUILDDIR variable (which can be overridden in the environment)
to specify an alternative location for building the package. This is
useful for people who want to build on a different filesystem for
improved performance (e.g. tmpfs).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch enables the automatic compression of executable binaries
using UPX when the 'upx' options is specified in makepkg.conf or the
PKGBUILD. Additional arguments can be passed to UPX by specifying
the UPXFLAGS variable.
Original-patch-by: Bryce Gibson <bryce@gibson-consulting.com.au>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fix failure at man page generation when building outside the source tree.
There may still be issues with other documentation types...
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
pacman.8.txt --gpgdir section is updated based on the pacman.conf manpage
pacman.conf is updated to include the default GPGDir
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
When I switched all paths to use `` formatting, I didn't realize
substitution didn't work in these quote marks. Use ++ instead to ensure
attributes are substituted where appropriate.
Signed-off-by: Dan McGee <dan@archlinux.org>
These addditional attributes come from the git asciidoc.conf file. Also,
fix a place where we used {treename} without escaping the braces,
causing the generated manpage to be missing text.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add quotes around $srcdir/$pkgdir (FS#23960) and use a package()
function.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Change "which" to "that" when used in a restrictive clause.
Replace usage of the relative prounoun "those" with a common noun for
added clarity.
Signed-off-by: Matt Mooney <mfm@muteddisk.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Also unify the usage output with that given by repo-add itself.
Dan: use 'options', not 'option(s)'.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
One paragraph for -Suu and one for -Su foo. Fixes FS#23451.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add the "GPGKEY" option to makepkg.conf for specifying signing packages
with the non-default key from the keyring. Is overridded by makepkg's
--key option.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If enabled, displays package lists for upgrade, sync and remove
operations formatted as a table. Falls back to default list display if
insufficient terminal columns are available.
Example output:
:: Starting full system upgrade...
:: Replace libjpeg with testing/libjpeg-turbo? [Y/n]
resolving dependencies...
looking for inter-conflicts...
Remove (1):
Name Old Version Size
libjpeg 8.3.0-1 0.83 MB
Total Removed Size: 0.83 MB
Targets (5):
Name Old Version New Version Size
libjpeg-turbo 1.1.0-1 0.20 MB
linux-firmware 20110201-1 20110227-1 8.23 MB
ncurses 5.7-4 5.8-1 0.92 MB
ppl 0.11.1-1 0.11.2-1 2.74 MB
v4l-utils 0.8.1-1 0.8.3-1 0.23 MB
Total Download Size: 12.32 MB
Total Installed Size: 58.82 MB
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Dan: The commit message originally referenced "VerbosePkgLists", but I'm
going to change the name of the option. In addition, this patch serves
a purpose being standalone- we should really do things like this with
-S --print and hopefully -Q --print in the future.
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add -v, mention delta support (other than -d), and split
repo-add-specific options out from those common to repo-add and
repo-remove.
Signed-off-by: Ray Kohler <ataraxia937@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
GnuPG looks for configuration files and keyrings in its home directory.
For a user, that is typically ~/.gnupg.
This patch causes pacman to use /etc/pacman.d/gnupg/ as the default
GnuPG home. One may override the default using --gpgdir on the command-line
or GPGDir in pacman's configuration file.
Signed-off-by: Chris Brannon <cmbrannon@cox.net>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fix the way we were referring to paths (use ``), .pac* extensions (use
''), and other general things across our main manpages.
Signed-off-by: Dan McGee <dan@archlinux.org>
In order to be fully secure, we can't only sign packages. We also need
to sign our repository metadata to prevent database falsification,
dependency injection, etc. Add an '-s/--sign' option that allows this
functionality, and will generate a .sig file side-by-side with the
package database.
While at it, fix the issue where a signature file would never be found
because of 'cd' madness (this needs fixing in another commit).
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a rather simple patch to add signing support to makepkg. Add a
create_signature() to makepkg, add a 'sign' BUILDENV option in makepkg.conf,
and document the changes in the makepkg.conf manpage.
Signed-off-by: Geoffroy Carrier <geoffroy.carrier@koon.fr>
Signed-off-by: Dan McGee <dan@archlinux.org>
Change the term 'packages' to 'targets' in the synopsis as well, since
command line parameters could just as well be groups, repos, or URLs.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The current behaviour, which is placing source packages in PKGDEST if
SRCPKGDEST is not set, is inconsistent with {SRC,PKG}DEST handling and
there is no real advantage in doing so.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
-d skips checking the version of a dependency.
-dd skips the whole dependency check.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Florian Pritz <bluewind@server-speed.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
No reason to disallow this- it allows keeping even more packages around in
the cache. Test cases included for this case and to ensure the default
behavior is preserved.
Signed-off-by: Dan McGee <dan@archlinux.org>
dirty indicates if the repo has uncommited changes or not when building,
so dont hardcode this info.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allan, I had no idea you were not listed here. I think you count as an
active developer at the moment. Also, move Aaron to the past contributors
section.
Signed-off-by: Dan McGee <dan@archlinux.org>
This includes info on version comparison that is very similar to the stuff
in the pacman manpage, but also a few vercmp examples, the return values,
and other fun stuff.
Also update the version comparison stuff in the pacman manpage.
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead, go the same route we have always taken with version-release in
libalpm and treat it all as one piece of information. Makepkg is the only
script that knows about epoch as a distinct value; from there on out we will
parse out the components as necessary.
This makes the code a lot simpler as far as epoch handling goes. The
downside here is that we are tossing some compatibility to the wind;
packages using force will have to be rebuilt with an incremented epoch to
keep their special status.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add the "buildflags" option, which is useful in its negative form
for disabling CFLAGS, CXXFLAGS and LDFLAGS when building a package.
This is useful when determining of one of these flags is causing
an issue with a package.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
A PKGBUILD can have an option check() function for running test suites
between the build() and package() stages. This function is run by
default but can be disabled globally in with "!check" in BUILDENV in
makepkg.conf. This setting can be controlled on an individual package
basis using makepkg's --check and --nocheck flags. Addition dependencies
needed for running the test suite can be specified in the checkdepends
array and are only checked when running the check() function.
Original-work-by: Jeff C <jeff@kcaccess.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add some basic documentation for the PKGEXT and SRCEXT options in
makepkg.conf. Fixes FS#21302.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Disk space checking is likely to be an unnecessary bottleneck to
people with reasonable partition sizes so add a configuration option
to allow it to be disabled/enabled as wanted.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When a -Sk or -Uk operation induced a removal of an existing local
package, --dbonly was not in effect and the files were all removed.
Fixing this behavior was already marked as TODO in database012 pactest
------------
TODO: I honestly think the above should NOT delete the original les, it
hould upgrade the DB entry without touching anything on the file stem.
E.g. this test should be the same as:
pacman -R --dbonly dummy && pacman -U --dbonly dummy.pkg.tar.gz
------------
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
[Dan: small coding style touchup]
Signed-off-by: Dan McGee <dan@archlinux.org>
The three parts (help, manpage and code) are now organized in the same
way and much easier to compare :
- specific options
- install/upgrade options for -S and -U
- transaction options for -S -R and -U
- global options
After this re-organization, it was easy to update and sync the three
components together. Duplication is also avoided.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
In the following, the letters SRUDQ refer to the corresponding pacman
operations.
Most of the work in this commit is about removing as many options as
possible from the global section and moving them to where they actually
belong.
Additionally, --ignore{,group} are added to U and --dbonly is added
to S.
--dbonly added to S
--asdeps moved to S/U/D
--asexplicit moved to S/U/D
--print-format moved to S/U/R
--noprogressbar moved to S/U/R
--noscriptlet moved to S/U/R
--ignorepkg added to U
--ignoregrp added to U
-d moved to S/U/R (--nodeps) and Q (--deps)
-p moved to S/U/R (--print) and Q (--file)
-f moved to S/U
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This applies to contrib/ files, our scripts, and the documentation.
Dan: fix 'make clean' in contrib/ directory.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
For binary packages, the majority of the time used in the debugs symbol
stripping process is the actual stripping of the binaries/libraries and
not the testing of which files to strip. This allows more complete
stripping of packages that install to "non-standard" paths that would
not be generally included in makepkg.conf.
Any performance hit that may be apparent for (_large_) "arch=('any')"
packages can readily be avoided by disabling stripping in the PKGBUILD
options array.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
