- do not grow memory by doubling its size
- do not leak previously allocated memory if reallocation fails
- replace while-loop with a single check to make sure
that the requested amount of data fits into the buffer
Bug: http://curl.haxx.se/bug/view.cgi?id=1450
Reported-by: Warren Menzer
There is no need to set the 'state' and 'result' member variables to
SMB_REQUESTING (0) and CURLE_OK (0) after the allocation via calloc()
as calloc() initialises the contents to zero.
I don't think both of my fix ups from yesterday were needed to fix the
compilation warning, so remove the one that I think is unnecessary and
let the next Android autobuild prove/disprove it.
smtp.c:2357 warning: adding 'size_t' (aka 'unsigned long') to a string
does not append to the string
smtp.c:2375 warning: adding 'size_t' (aka 'unsigned long') to a string
does not append to the string
smtp.c:2386 warning: adding 'size_t' (aka 'unsigned long') to a string
does not append to the string
Used array index notation instead.
This fixes compilation issues with compilers that don't support 64-bit
integers through long long or __int64 which was introduced in commit
07b66cbfa4.
Previously USE_NTLM2SESSION would only be defined automatically when
USE_NTRESPONSES wasn't already defined. Separated the two definitions
so that the user can manually set USE_NTRESPONSES themselves but
USE_NTLM2SESSION is defined automatically if they don't define it.
As the OpenSSL and NSS Crypto engines are prefered by the core NTLM
routines, to the Windows Crypt API, don't define USE_WIN32_CRYPT
automatically when either OpenSSL or NSS are in use - doing so would
disable NTLM2Session responses in NTLM type-3 messages.
If the scratch buffer was allocated in a previous call to
Curl_smtp_escape_eob(), a new buffer not allocated in the subsequent
call and no action taken by that call, then an attempt would be made to
try and free the buffer which, by now, would be part of the data->state
structure.
This bug was introduced in commit 4bd860a001.
Fixed a problem with the CRLF. detection when multiple buffers were
used to upload an email to libcurl and the line ending character(s)
appeared at the end of each buffer. This meant any lines which started
with . would not be escaped into .. and could be interpreted as the end
of transmission string instead.
This only affected libcurl based applications that used a read function
and wasn't reproducible with the curl command-line tool.
Bug: http://curl.haxx.se/bug/view.cgi?id=1456
Assisted-by: Patrick Monnerat
parsedate.c:548: warning: 'parsed' may be used uninitialized in this
function
As curl_getdate() returns -1 when parsedate() fails we can initialise
parsed to -1.
This fixes the test 506 torture test. The internal cookie API really
ought to be improved to separate cookie parsing errors (which may be
ignored) with OOM errors (which should be fatal).
As Windows based autoconf builds don't yet define USE_WIN32_CRYPTO
either explicitly through --enable-win32-cypto or automatically on
_WIN32 based platforms, subsequent builds broke with the following
error message:
"Can't compile NTLM support without a crypto library."
Fixed an issue with the message size calculation where the raw bytes
from the buffer were interpreted as signed values rather than unsigned
values.
Reported-by: Gisle Vanem
Assisted-by: Bill Nagel
Don't use a hard coded size of 4 for the security layer and buffer size
in Curl_sasl_create_gssapi_security_message(), instead, use sizeof() as
we have done in the sasl_gssapi module.
Reduced the amount of free's required for the decoded challenge message
in Curl_sasl_create_gssapi_security_message() as a result of coding it
differently in the sasl_gssapi module.
Sending NTLM/Negotiate header again after successful authentication
breaks the connection with certain Proxies and request types (POST to MS
Forefront).
The ability to do HTTP requests over a UNIX domain socket has been
requested before, in Apr 2008 [0][1] and Sep 2010 [2]. While a
discussion happened, no patch seems to get through. I decided to give it
a go since I need to test a nginx HTTP server which listens on a UNIX
domain socket.
One patch [3] seems to make it possible to use the
CURLOPT_OPENSOCKETFUNCTION function to gain a UNIX domain socket.
Another person wrote a Go program which can do HTTP over a UNIX socket
for Docker[4] which uses a special URL scheme (though the name contains
cURL, it has no relation to the cURL library).
This patch considers support for UNIX domain sockets at the same level
as HTTP proxies / IPv6, it acts as an intermediate socket provider and
not as a separate protocol. Since this feature affects network
operations, a new feature flag was added ("unix-sockets") with a
corresponding CURL_VERSION_UNIX_SOCKETS macro.
A new CURLOPT_UNIX_SOCKET_PATH option is added and documented. This
option enables UNIX domain sockets support for all requests on the
handle (replacing IP sockets and skipping proxies).
A new configure option (--enable-unix-sockets) and CMake option
(ENABLE_UNIX_SOCKETS) can disable this optional feature. Note that I
deliberately did not mark this feature as advanced, this is a
feature/component that should easily be available.
[0]: http://curl.haxx.se/mail/lib-2008-04/0279.html
[1]: http://daniel.haxx.se/blog/2008/04/14/http-over-unix-domain-sockets/
[2]: http://sourceforge.net/p/curl/feature-requests/53/
[3]: http://curl.haxx.se/mail/lib-2008-04/0361.html
[4]: https://github.com/Soulou/curl-unix-socket
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
On some platforms curl would crash if no credentials were used. As such
added detection of such a use case to prevent this from happening.
Reported-by: Gisle Vanem
This patch prepares for adding UNIX domain sockets support.
TCP_NODELAY and TCP_KEEPALIVE are specific to TCP/IP sockets, so do not
apply these to other socket types. bindlocal only works for IP sockets
(independent of TCP/UDP), so filter that out too for other types.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
smb.c:398: warning: comparison of integers of different signs:
'ssize_t' (aka 'long') and 'unsigned long'
smb.c:443: warning: comparison of integers of different signs:
'ssize_t' (aka 'long') and 'unsigned long'
smb.c:322: warning: conversion to 'short unsigned int' from 'unsigned
int' may alter its value
smb.c:323: warning: conversion to 'short unsigned int' from 'unsigned
int' may alter its value
smb.c:482: warning: conversion to 'short unsigned int' from 'int' may
alter its value
smb.c:521: warning: conversion to 'unsigned int' from 'curl_off_t' may
alter its value
smb.c:549: warning: conversion to 'unsigned int' from 'curl_off_t' may
alter its value
smb.c:550: warning: conversion to 'short unsigned int' from 'int' may
alter its value
smb.c:489: warning: declaration of 'close' shadows a global declaration
smb.c:511: warning: declaration of 'read' shadows a global declaration
smb.c:528: warning: declaration of 'write' shadows a global declaration
smb.c:212: warning: unused parameter 'done'
smb.c:380: warning: ISO C does not allow extra ';' outside of a function
smb.c:812: warning: unused parameter 'premature'
smb.c:822: warning: unused parameter 'dead'
smb.c:311: warning: conversion from 'unsigned __int64' to 'u_short',
possible loss of data
smb.c:425: warning: conversion from '__int64' to 'unsigned short',
possible loss of data
smb.c:452: warning: conversion from '__int64' to 'unsigned short',
possible loss of data
smb.c:162: error: comma at end of enumerator list
smb.c:469: warning: conversion from 'size_t' to 'unsigned short',
possible loss of data
smb.c:517: warning: conversion from 'curl_off_t' to 'unsigned int',
possible loss of data
smb.c:545: warning: conversion from 'curl_off_t' to 'unsigned int',
possible loss of data
If the scratch buffer already existed when the CRLF conversion was
performed then the buffer pointer would be checked twice for NULL. This
second check is only necessary if the call to malloc() was performed by
the first check.
Whilst I had moved the dot stuffing code from being performed before
CRLF conversion takes place to after it, in commit 4bd860a001, I had
moved it outside the 'when something read' block of code when meant
it could perform the dot stuffing twice on partial send if nread
happened to contain the right values. It also meant the function could
potentially read past the end of buffer. This was highlighted by the
following warning:
warning: `nread' might be used uninitialized in this function
After commit 48d19acb7c the HTTP code would call Curl_nss_force_init()
twice when decoding a NTLM type-2 message, once directly and the other
through the call to Curl_sasl_decode_ntlm_type2_message().
This commit disables pipelining for HTTP/2 or upgraded connections. For
HTTP/2, we do not support multiplexing. In general, requests cannot be
pipelined in an upgraded connection, since it is now different protocol.
When the connection code decides to close a socket it informs the multi
system via the Curl_multi_closed function. The multi system may, in
turn, invoke the CURLMOPT_SOCKETFUNCTION function with
CURL_POLL_REMOVE. This happens after the socket has already been
closed. Reorder the code so that CURL_POLL_REMOVE is called before the
socket is closed.
Debug output 'typo' fix.
Don't print an extra "0x" in
* Pipe broke: handle 0x0x2546d88, url = /
Add debug output.
Print the number of connections in the connection cache when
adding one, and not only when one is removed.
Fix typos in comments.
Updated the usage of some legacy APIs, that are preventing curl from
compiling for Windows Store and Windows Phone build targets.
Suggested-by: Stefan Neis
Feature: http://sourceforge.net/p/curl/feature-requests/82/
Visual Studio 2012 introduced support for Windows Store apps as well as
supporting Windows Phone 8. Introduced build targets that allow more
modern APIs to be used as certain legacy ones are not available on these
new platforms.
Rather than define the function as extern in the source files that use
it, moved the function declaration into the SASL header file just like
the Digest and NTLM clean-up functions.
Additionally, added a function description comment block.
Previously if HTTP/2 traffic is appended to HTTP Upgrade response header
(thus they are in the same buffer), the trailing HTTP/2 traffic is not
processed and lost. The appended data is most likely SETTINGS frame.
If it is lost, nghttp2 library complains server does not obey the HTTP/2
protocol and issues GOAWAY frame and curl eventually drops connection.
This commit fixes this problem and now trailing data is processed.
Fix detection of the AsynchDNS feature which not just depends on
pthreads support, but also on whether USE_POSIX_THREADS is set or not.
Caught by test 1014.
This patch adds a new ENABLE_THREADED_RESOLVER option (corresponding to
--enable-threaded-resolver of autotools) which also needs a check for
HAVE_PTHREAD_H.
For symmetry with autotools, CURL_USE_ARES is renamed to ENABLE_ARES
(--enable-ares). Checks that test for the availability actually use
USE_ARES instead as that is the result of whether a-res is available or
not (in practice this does not matter as CARES is marked as required
package, but nevertheless it is better to write the intent).
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
In preparation for moving the NTLM message code into the SASL module,
and separating the native code from the SSPI code, added functions that
simply call the functions in curl_ntlm_msg.c.
USE_NTLM would only be defined if: HTTP support was enabled, NTLM and
cryptography weren't disabled, and either a supporting cryptography
library or Windows SSPI was being compiled against.
This means it was not possible to build libcurl without HTTP support
and use NTLM for other protocols such as IMAP, POP3 and SMTP. Rather
than introduce a new SASL pre-processor definition, removed the HTTP
prerequisite just like USE_SPNEGO and USE_KRB5.
Note: Winbind support still needs to be dependent on CURL_DISABLE_HTTP
as it is only available to HTTP at present.
This bug dates back to August 2011 when I started to add support for
NTLM to SMTP.
Reworked the input token (challenge message) storage as what is passed
to the buf and desc in the response generation are typically blobs of
data rather than strings, so this is more in keeping with other areas
of the SSPI code, such as the NTLM message functions.
This temporarily breaks HTTP digest authentication in SSPI based builds,
causing CURLE_NOT_BUILT_IN to be returned. A follow up commit will
resume normal operation.
Added forward declaration of digestdata to overcome the following
compilation warning:
warning: 'struct digestdata' declared inside parameter list
Additionally made the ntlmdata forward declaration dependent on
USE_NTLM similar to how digestdata and kerberosdata are.
To provide consistent behaviour between the various HTTP authentication
functions use CURLcode based error codes for Curl_input_digest()
especially as the calling code doesn't use the specific error code just
that it failed.
These were previously hard coded, and whilst defined in security.h,
they may or may not be present in old header files given that these
defines were never used in the original code.
Not only that, but there appears to be some ambiguity between the ANSI
and UNICODE NTLM definition name in security.h.
When duplicating a handle, the data to post was duplicated using
strdup() when it could be binary and contain zeroes and it was not even
zero terminated! This caused read out of bounds crashes/segfaults.
Since the lib/strdup.c file no longer is easily shared with the curl
tool with this change, it now uses its own version instead.
Bug: http://curl.haxx.se/docs/adv_20141105.html
CVE: CVE-2014-3707
Reported-By: Symeon Paraschoudis
- Prior to this change no SSL minimum version was set by default at
runtime for PolarSSL. Therefore in most cases PolarSSL would probably
have defaulted to a minimum version of SSLv3 which is no longer secure.
The previous condition that checked if the socket was marked as readable
when also adding a writable one, was incorrect and didn't take the pause
bits properly into account.
autotools does not use features.h nor _BSD_SOURCE. As this macro
triggers warnings since glibc 2.20, remove it. It should not have
functional differences.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Typically the USE_WINDOWS_SSPI definition would not be used when the
CURL_DISABLE_CRYPTO_AUTH define is, however, it is still a valid build
configuration and, as such, the SASL Kerberos V5 (GSSAPI) authentication
data structures and functions would incorrectly be used when they
shouldn't be.
Introduced a new USE_KRB5 definition that takes into account the use of
CURL_DISABLE_CRYPTO_AUTH like USE_SPNEGO and USE_NTLM do.
Basically since servers often then don't respond well to this and
instead send the full contents and then libcurl would instead error out
with the assumption that the server doesn't support resume. As the data
is then already transfered, this is now considered fine.
Test case 1434 added to verify this. Test case 1042 slightly modified.
Reported-by: hugo
Bug: http://curl.haxx.se/bug/view.cgi?id=1443
Return a more appropriate error, rather than CURLE_OUT_OF_MEMORY when
acquiring the credentials handle fails. This is then consistent with
the code prior to commit f7e24683c4 when log-in credentials were empty.
Fixed the ability to use the current log-in credentials with DIGEST-MD5.
I had previously disabled this functionality in commit 607883f13c as I
couldn't get this to work under Windows 8, however, from testing HTTP
Digest authentication through Windows SSPI and then further testing of
this code I have found it works in Windows 7.
Some further investigation is required to see what the differences are
between Windows 7 and 8, but for now enable this functionality as the
code will return an error when AcquireCredentialsHandle() fails.
HTTP 1.1 is clearly specified to only allow three digit response codes,
and libcurl used sscanf("%3d") for that purpose. This made libcurl
support smaller numbers but not larger. It does now, but we will not
make any specific promises nor document this further since it is going
outside of what HTTP is.
Bug: http://curl.haxx.se/bug/view.cgi?id=1441
Reported-by: Balaji
Don't call CompleteAuthToken() after InitializeSecurityContext() has
returned SEC_I_CONTINUE_NEEDED as this return code only indicates the
function should be called again after receiving a response back from
the server.
This only affected the Digest and NTLM authentication code.
For consistency with other areas of the NTLM code propagate all errors
from Curl_ntlm_core_mk_nt_hash() up the call stack rather than just
CURLE_OUT_OF_MEMORY.
- Remove SSLv3 from SSL default in darwinssl, schannel, cyassl, nss,
openssl effectively making the default TLS 1.x. axTLS is not affected
since it supports only TLS, and gnutls is not affected since it already
defaults to TLS 1.x.
- Update CURLOPT_SSLVERSION doc
... for the local variable name in functions holding the return
code. Using the same name universally makes code easier to read and
follow.
Also, unify code for checking for CURLcode errors with:
if(result) or if(!result)
instead of
if(result == CURLE_OK), if(CURLE_OK == result) or if(result != CURLE_OK)
Prefer usage of Perl modules for sha1 calculation since there
might be systems where openssl is not installed or not in path.
If openssl is used for sha1 calculation then dont rely on cut
since it is usually not available on other systems than Linux.
It turned out some features were not enabled in the build since for
example url.c #ifdefs on features that are defined on a per-backend
basis but vtls.h didn't include the backend headers.
CURLOPT_CERTINFO was one such feature that was accidentally disabled.
There is no need for such function. Include_directories propagate by
themselves and having a function with one simple link statement makes
little sense.
Coverity CID 252518. This function is in general far too complicated for
its own good and really should be broken down into several smaller
funcitons instead - but I'm adding this protection here now since it
seems there's a risk the code flow can end up here and dereference a
NULL pointer.
Coverity CID 1241957. Removed the unused argument. As this struct and
pointer now are used only for krb5, there's no need to keep unused
function arguments around.
Option --pinnedpubkey takes a path to a public key in DER format and
only connect if it matches (currently only implemented with OpenSSL).
Provides CURLOPT_PINNEDPUBLICKEY for curl_easy_setopt().
Extract a public RSA key from a website like so:
openssl s_client -connect google.com:443 2>&1 < /dev/null | \
sed -n '/-----BEGIN/,/-----END/p' | openssl x509 -noout -pubkey \
| openssl rsa -pubin -outform DER > google.com.der
Coverify CID 1157776. Removed a superfluous if() that always evaluated
true (and an else clause that never ran), and then re-indented the
function accordingly.
Coverity CID 1215284. The server name is extracted with
Curl_copy_header_value() and passed in to this function, and
copy_header_value can actually can fail and return NULL.
For private keys, use the first match from: user-specified key file
(if provided), ~/.ssh/id_rsa, ~/.ssh/id_dsa, ./id_rsa, ./id_dsa
Note that the previous code only looked for id_dsa files. id_rsa is
now generally preferred, as it supports larger key sizes.
For public keys, use the user-specified key file, if provided.
Otherwise, try to extract the public key from the private key file.
This means that passing --pubkey is typically no longer required,
and makes the key-handling behavior more like OpenSSH.
Coverity CID 1202836. If the proxy environment variable returned an empty
string, it would be leaked. While an empty string is not really a proxy, other
logic in this function already allows a blank string to be returned so allow
that here to avoid the leak.
Coverity CID 1215287. There's a potential risk for a memory leak in
here, and moving the free call to be unconditional seems like a cheap
price to remove the risk.
Coverity CID 1215296. There's a potential risk for a memory leak in
here, and moving the free call to be unconditional seems like a cheap
price to remove the risk.
Coverity detected this. CID 1241954. When Curl_poll() returns a negative value
'mcode' was uninitialized. Pretty harmless since this is debug code only and
would at worst cause an error to _not_ be returned...
Mostly because we use C strings and they end at a binary zero so we know
we can't open a file name using an embedded binary zero.
Reported-by: research@g0blin.co.uk
The switch to using Curl_expire_latest() in commit cacdc27f52 was a
mistake and was against the advice even mentioned in that commit. The
comparison in asyn-thread.c:Curl_resolver_is_resolved() makes
Curl_expire() the suitable function to use.
Bug: http://curl.haxx.se/bug/view.cgi?id=1426
Reported-By: graysky
Previously we did not handle EOF from underlying transport socket and
wrongly just returned error code CURL_AGAIN from http2_recv, which
caused busy loop since socket has been closed. This patch adds the
code to handle EOF situation and tells the upper layer that we got
EOF.
Removed ISC_REQ_* flags from calls to InitializeSecurityContext to fix
bug in NTLM handshake for HTTP proxy authentication.
NTLM handshake for HTTP proxy authentication failed with error
SEC_E_INVALID_TOKEN from InitializeSecurityContext for certain proxy
servers on generating the NTLM Type-3 message.
The flag ISC_REQ_CONFIDENTIALITY seems to cause the problem according
to the observations and suggestions made in a bug report for the
QT project (https://bugreports.qt-project.org/browse/QTBUG-17322).
Removing all the flags solved the problem.
Bug: http://curl.haxx.se/mail/lib-2014-08/0273.html
Reported-by: Ulrich Telle
Assisted-by: Steve Holme, Daniel Stenberg
As a sort of step forward, this script will now first try to get the
data from the HTTPS URL using curl, and only if that fails it will
switch back to the HTTP transfer using perl's native LWP functionality.
To reduce the risk of this script being tricked.
Using HTTPS to get a cert bundle introduces a chicken-and-egg problem so
we can't really ever completely disable HTTP, but chances are that most
users already have a ca cert bundle that trusts the mozilla.org site
that this script downloads from.
A future version of this script will probably switch to require a
dedicated "insecure" command line option to allow downloading over HTTP
(or unverified HTTPS).
By not detecting and rejecting domain names for partial literal IP
addresses properly when parsing received HTTP cookies, libcurl can be
fooled to both send cookies to wrong sites and to allow arbitrary sites
to set cookies for others.
CVE-2014-3613
Bug: http://curl.haxx.se/docs/adv_20140910A.html
Historically the default "unknown" value for progress.size_dl and
progress.size_ul has been zero, since these values are initialized
implicitly by the calloc that allocates the curl handle that these
variables are a part of. Users of curl that install progress
callbacks may expect these values to always be >= 0.
Currently it is possible for progress.size_dl and progress.size_ul
to by set to a value of -1, if Curl_pgrsSetDownloadSize() or
Curl_pgrsSetUploadSize() are passed a "size" of -1 (which a few
places currently do, and a following patch will add more). So
lets update Curl_pgrsSetDownloadSize() and Curl_pgrsSetUploadSize()
so they make sure that these variables always contain a value that
is >= 0.
Updates test579 and test599.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
As the current element in the list is free()d by Curl_llist_remove(),
when the associated connection is pending, reworked the loop to avoid
accessing the next element through e->next afterward.
SecCertificateCopyPublicKey() is not available on iPhone. Use
CopyCertSubject() instead to see if the certificate returned by
SecCertificateCreateWithData() is valid.
Reported-by: Toby Peterson
... as the struct is free()d in the end anyway. It was first pointed out
to me that one of the ->msglist assignments were supposed to have been
->pending but was a copy and paste mistake when I realized none of the
clearing of pointers had to be there.
... instead of scanning through all handles, stash only the actual
handles that are in that state in the new ->pending list and scan that
list only. It should be mostly empty or very short. And only used for
pipelining.
This avoids a rather hefty slow-down especially notable if you add many
handles to the same multi handle. Regression introduced in commit
0f147887 (version 7.30.0).
Bug: http://curl.haxx.se/mail/lib-2014-07/0206.html
Reported-by: David Meyer
Forwards the setting as minimum ssl version (if set) to polarssl. If
the server does not support the requested version the SSL Handshake will
fail.
Bug: http://curl.haxx.se/bug/view.cgi?id=1419
SecCertificateCreateWithData() returns a non-NULL SecCertificateRef even
if the buffer holds an invalid or corrupt certificate. Call
SecCertificateCopyPublicKey() to make sure cacert is a valid
certificate.
Introducing Curl_expire_latest(). To be used when we the code flow only
wants to get called at a later time that is "no later than X" so that
something can be checked (and another timeout be added).
The low-speed logic for example could easily be made to set very many
expire timeouts if it would be called faster or sooner than what it had
set its own timer and this goes for a few other timers too that aren't
explictiy checked for timer expiration in the code.
If there's no condition the code that says if(time-passed >= TIME), then
Curl_expire_latest() is preferred to Curl_expire().
If there exists such a condition, it is on the other hand important that
Curl_expire() is used and not the other.
Bug: http://curl.haxx.se/mail/lib-2014-06/0235.html
Reported-by: Florian Weimer
While waiting for a host resolve, check if the host cache may have
gotten the name already (by someone else), for when the same name is
resolved by several simultanoues requests.
The resolver thread occasionally gets stuck in getaddrinfo() when the
DNS or anything else is crappy or slow, so when a host is found in the
DNS cache, leave the thread alone and let itself cleanup the mess.
If the --cacert option is used with a CA certificate bundle that
contains multiple CA certificates, iterate through it, adding each
certificate as a trusted root CA.
This is usually due to failed auth. There's no point in us keeping such
a connection alive since it shouldn't be re-used anyway.
Bug: http://curl.haxx.se/bug/view.cgi?id=1381
Reported-by: Marcel Raad
This was done to make sure NTLM state that is bound to a connection
doesn't survive and gets used for the subsequent request - but
disconnects can also be done to for example make room in the connection
cache and thus that connection is not strictly related to the easy
handle's current operation.
The http authentication state is still kept in the easy handle since all
http auth _except_ NTLM is connection independent and thus survive over
multiple connections.
Bug: http://curl.haxx.se/mail/lib-2014-08/0148.html
Reported-by: Paras S
Problem: if CURLOPT_FORBID_REUSE is set, requests using NTLM failed
since NTLM requires multiple requests that re-use the same connection
for the authentication to work
Solution: Ignore the forbid reuse flag in case the NTLM authentication
handshake is in progress, according to the NTLM state flag.
Fixed known bug #77.
A conditionally compiled block in connect.c references WinSock 2
symbols, but used `#ifdef HAVE_WINSOCK_H` instead of `#ifdef
HAVE_WINSOCK2_H`.
Bug: http://curl.haxx.se/mail/lib-2014-08/0155.html
The URL is not a property of the connection so it should not be freed in
the connection disconnect but in the Curl_close() that frees the easy
handle.
Bug: http://curl.haxx.se/mail/lib-2014-08/0148.html
Reported-by: Paras S
Corrected a number of the error codes that can be returned from the
Curl_sasl_create_gssapi_security_message() function when things go
wrong.
It makes more sense to return CURLE_BAD_CONTENT_ENCODING when the
inbound security challenge can't be decoded correctly or doesn't
contain the KERB_WRAP_NO_ENCRYPT flag and CURLE_OUT_OF_MEMORY when
EncryptMessage() fails. Unfortunately the previous error code of
CURLE_RECV_ERROR was a copy and paste mistakes on my part and should
have been correct in commit 4b491c675f :(
... to handle "*/[total]". Also, removed the strange hack that made
CURLOPT_FAILONERROR on a 416 response after a *RESUME_FROM return
CURLE_OK.
Reported-by: Dimitrios Siganos
Bug: http://curl.haxx.se/mail/lib-2014-06/0221.html
In preparation for the upcoming SSPI implementation of GSSAPI
authentication, moved the definition of KERB_WRAP_NO_ENCRYPT from
socks_sspi.c to curl_sspi.h allowing it to be shared amongst other
SSPI based code.
... as mxr.mozilla.org is due to be retired.
The new host doesn't support If-Modified-Since nor ETags, meaning that
the script will now defer to download and do a post-transfer checksum
check to see if a new output is to be generated. The new output format
will hold the SHA1 checksum of the source file for that purpose.
We call this version 1.22
Reported-by: Ed Morley
Bug: http://curl.haxx.se/bug/view.cgi?id=1409
Bringing back the old functionality that was mistakenly removed when the
connection cache was remade. When creating a new connection, all the
existing ones are checked and those that are known to be dead get
disconnected for real and removed from the connection cache. It helps
the cache from holding on to very many stale connections and aids in
keeping down the number of system sockets in wait states.
Help-by: Jonatan Vela <jonatan.vela@ergon.ch>
Bug: http://curl.haxx.se/mail/lib-2014-06/0189.html
Curl_poll and Curl_wait_ms require the fix applied to Curl_socket_check
in commits b61e8b8 and c771968:
When poll or select are interrupted and coincides with the timeout
elapsing, the functions return -1 indicating an error instead of 0 for
the timeout.
Given the SSPI package info query indicates a token size of 4096 bytes,
updated to use a dynamic buffer for the response message generation
rather than a fixed buffer of 1024 bytes.
Updated to use a dynamic buffer for the SPN generation via the recently
introduced Curl_sasl_build_spn() function rather than a fixed buffer of
1024 characters, which should have been more than enough, but by using
the new function removes the need for another variable sname to do the
wide character conversion in Unicode builds.
Updated Curl_sasl_create_digest_md5_message() to use a dynamic buffer
for the SPN generation via the recently introduced Curl_sasl_build_spn()
function rather than a fixed buffer of 128 characters.
Curl_sasl_create_digest_md5_message() would simply cast the SPN variable
to a TCHAR when calling InitializeSecurityContext(). This meant that,
under Unicode builds, it would not be valid wide character string.
Updated to use the recently introduced Curl_sasl_build_spn() function
which performs the correct conversion for us.
Various parts of the libcurl source code build a SPN for inclusion in
authentication data. This information is either used by our own native
generation routines or passed to authentication functions in third-party
libraries such as SSPI. However, some of these instances use fixed
buffers rather than dynamically allocated ones and not all of those that
should, convert to wide character strings in Unicode builds.
Implemented a common function that generates a SPN and performs the
wide character conversion where necessary.
Following the recent changes and in attempt to align the SSPI based
authentication code performed the following:
* Use NULL and SECBUFFVERSION rather than hard coded constants.
* Avoid comparison of zero in if statements.
* Standardised the buf and desc setup code.
Given the SSPI package info query indicates a token size of 2888 bytes,
and as with the Winbind code and commit 9008f3d56, use a dynamic buffer
for the Type-1 and Type-3 message generation rather than a fixed buffer
of 1024 bytes.
Just as with the SSPI implementations of Digest and Negotiate added a
package info query so that libcurl can a) return a more appropriate
error code when the NTLM package is not supported and b) it can be of
use later to allocate a dynamic buffer for the Type-1 and Type-3
output tokens rather than use a fixed buffer of 1024 bytes.
OPENSSL_config() is "strongly recommended" to use but unfortunately that
function makes an exit() call on wrongly formatted config files which
makes it hard to use in some situations. OPENSSL_config() itself calls
CONF_modules_load_file() and we use that instead and we ignore its
return code!
Reported-by: Jan Ehrhardt
Bug: http://curl.haxx.se/bug/view.cgi?id=1401
If the server rejects our authentication attempt and curl hasn't
called CompleteAuthToken() then the status variable will be
SEC_I_CONTINUE_NEEDED and not SEC_E_OK.
As such the existing detection mechanism for determining whether or not
the authentication process has finished is not sufficient.
However, the WWW-Authenticate: Negotiate header line will not contain
any data when the server has exhausted the negotiation, so we can use
that coupled with the already allocated context pointer.
To prevent infinite loop in readwrite_data() function when stream is
reset before any response body comes, reset closed flag to false once
it is evaluated to true.
"Expect: 100-continue", which was once deprecated in HTTP/2, is now
resurrected in HTTP/2 draft 14. This change adds its support to
HTTP/2 code. This change also includes stricter header field
checking.
Previously it only returned a CURLcode for errors, which is when it
returns a different size than what was passed in to it.
The http2 code only checked the curlcode and thus failed.
Under these circumstances, the connection hasn't been fully established
and smtp_connect hasn't been called, yet smtp_done still calls the state
machine which dereferences the NULL conn pointer in struct pingpong.
This now provides a weak random function since PolarSSL doesn't have a
quick and easy way to provide a good one. It does however provide the
framework to make one so it _can_ and _should_ be done...
To force each backend implementation to really attempt to provide proper
random. If a proper random function is missing, then we can explicitly
make use of the default one we use when TLS support is missing.
This commit makes sure it works for darwinssl, gnutls, nss and openssl.
warning C4267: '=' : conversion from 'size_t' to 'long', possible loss
of data
The member connection_id of struct connectdata is a long (always a
32-bit signed integer on Visual C++) and the member next_connection_id
of struct conncache is a size_t, so one of them should be changed to
match the other.
This patch the size_t in struct conncache to long (the less invasive
change as that variable is only ever used in a single code line).
Bug: http://curl.haxx.se/bug/view.cgi?id=1399
1 - fixes the warnings when built without http2 support
2 - adds CURLE_HTTP2, a new error code for errors detected by nghttp2
basically when they are about http2 specific things.
CyaSSL 3.0.0 returns a unique error code if no CA cert is available,
so translate that into CURLE_SSL_CACERT_BADFILE when peer verification
is requested.
- Replace CURLAUTH_GSSNEGOTIATE with CURLAUTH_NEGOTIATE
- CURL_VERSION_GSSNEGOTIATE is deprecated which
is served by CURL_VERSION_SSPI, CURL_VERSION_GSSAPI and
CURUL_VERSION_SPNEGO now.
- Remove display of feature 'GSS-Negotiate'
This reverts commit cb3e6dfa35 and instead fixes the problem
differently.
The reverted commit addressed a test failure in test 1021 by simplifying
and generalizing the code flow in a way that damaged the
performance. Now we modify the flow so that Curl_proxyCONNECT() again
does as much as possible in one go, yet still do test 1021 with and
without valgrind. It failed due to mistakes in the multi state machine.
Bug: http://curl.haxx.se/bug/view.cgi?id=1397
Reported-by: Paul Saab
It's wrong to assume that we can send a single SPNEGO packet which will
complete the authentication. It's a *negotiation* — the clue is in the
name. So make sure we handle responses from the server.
Curl_input_negotiate() will already handle bailing out if it thinks the
state is GSS_S_COMPLETE (or SEC_E_OK on Windows) and the server keeps
talking to us, so we should avoid endless loops that way.
This is the correct way to do SPNEGO. Just ask for it
Now I correctly see it trying NTLMSSP authentication when a Kerberos ticket
isn't available. Of course, we bail out when the server responds with the
challenge packet, since we don't expect that. But I'll fix that bug next...
This is just fundamentally broken. SPNEGO (RFC4178) is a protocol which
allows client and server to negotiate the underlying mechanism which will
actually be used to authenticate. This is *often* Kerberos, and can also
be NTLM and other things. And to complicate matters, there are various
different OIDs which can be used to specify the Kerberos mechanism too.
A SPNEGO exchange will identify *which* GSSAPI mechanism is being used,
and will exchange GSSAPI tokens which are appropriate for that mechanism.
But this SPNEGO implementation just strips the incoming SPNEGO packet
and extracts the token, if any. And completely discards the information
about *which* mechanism is being used. Then we *assume* it was Kerberos,
and feed the token into gss_init_sec_context() with the default
mechanism (GSS_S_NO_OID for the mech_type argument).
Furthermore... broken as this code is, it was never even *used* for input
tokens anyway, because higher layers of curl would just bail out if the
server actually said anything *back* to us in the negotiation. We assume
that we send a single token to the server, and it accepts it. If the server
wants to continue the exchange (as is required for NTLM and for SPNEGO
to do anything useful), then curl was broken anyway.
So the only bit which actually did anything was the bit in
Curl_output_negotiate(), which always generates an *initial* SPNEGO
token saying "Hey, I support only the Kerberos mechanism and this is its
token".
You could have done that by manually just prefixing the Kerberos token
with the appropriate bytes, if you weren't going to do any proper SPNEGO
handling. There's no need for the FBOpenSSL library at all.
The sane way to do SPNEGO is just to *ask* the GSSAPI library to do
SPNEGO. That's what the 'mech_type' argument to gss_init_sec_context()
is for. And then it should all Just Work™.
That 'sane way' will be added in a subsequent patch, as will bug fixes
for our failure to handle any exchange other than a single outbound
token to the server which results in immediate success.
Before GnuTLS 3.3.6, the gnutls_x509_crt_check_hostname() function
didn't actually check IP addresses in SubjectAltName, even though it was
explicitly documented as doing so. So do it ourselves...
The old way using getpwuid could cause problems in programs that enable
reading from netrc files simultaneously in multiple threads.
Reported-by: David Woodhouse
The AES-GCM ciphers were added to GnuTLS as late as ver. 3.0.1 but
the code path in which they're referenced here is only ever used for
somewhat older GnuTLS versions. This caused undeclared identifier errors
when compiling against those.
This seems to have become necessary for SRP support to work starting
with GnuTLS ver. 2.99.0. Since support for SRP was added to GnuTLS
before the function that takes this priority string, there should be no
issue with backward compatibility.
When an error has been detected, skip the final forced call to the
progress callback by making sure to pass the current return code
variable in the Curl_done() call in the CURLM_STATE_DONE state.
This avoids the "extra" callback that could occur even if you returned
error from the progress callback.
Bug: http://curl.haxx.se/mail/lib-2014-06/0062.html
Reported by: Jonathan Cardoso Machado
The static connection counter caused a race condition. Moving the
connection id counter into conncache solves it, as well as simplifying
the related logic.
They were added because of an older code path that used allocations and
should not have been left in the code. With this change the logic goes
back to how it was.
Curl_rand() will return a dummy and repatable random value for this
case. Makes it possible to write test cases that verify output.
Also, fake timestamp with CURL_FORCETIME set.
Only when built debug enabled of course.
Curl_ssl_random() was not used anymore so it has been
removed. Curl_rand() is enough.
create_digest_md5_message: generate base64 instead of hex string
curl_sasl: also fix memory leaks in some OOM situations
httpproxycode is not reset in Curl_initinfo, so a 407 is not reset even
if curl_easy_reset is called between transfers.
Bug: http://curl.haxx.se/bug/view.cgi?id=1380
The method change is forbidden by the obsolete RFC2616, but libcurl did
it anyway for compatibility reasons. The new RFC7231 allows this
behaviour so there's no need for the scary "Violate RFC 2616/10.3.x"
notice. Also update the comments accordingly.
The SASL/Digest previously used the current time's seconds +
microseconds to add randomness but it is much better to instead get more
data from Curl_rand().
It will also allow us to easier "fake" that for debug builds on demand
in a future.
Rather than use a short 8-byte hex string, extended the cnonce to be
32-bytes long, like Windows SSPI does.
Used a combination of random data as well as the current date and
time for the generation.
"Any two of the parameters, readfds, writefds, or exceptfds, can be
given as null. At least one must be non-null, and any non-null
descriptor set must contain at least one handle to a socket."
http://msdn.microsoft.com/en-ca/library/windows/desktop/ms740141(v=vs.85).aspx
When using select(), cURL doesn't adhere to this (WinSock-specific)
rule, and can ask to monitor empty fd_sets, which leads to select()
returning WSAEINVAL (i.e. EINVAL) and connections failing in mysterious
ways as a result (at least when using the curl_multi_socket_action()
interface).
Bug: http://curl.haxx.se/mail/lib-2014-05/0278.html
OpenSSL passes out and outlen variable uninitialized to
select_next_proto_cb callback function. If the callback function
returns SSL_TLSEXT_ERR_OK, the caller assumes the callback filled
values in out and outlen and processes as such. Previously, if there
is no overlap in protocol lists, curl code does not fill any values in
these variables and returns SSL_TLSEXT_ERR_OK, which means we are
triggering undefined behavior. valgrind warns this.
This patch fixes this issue by fallback to HTTP/1.1 if there is no
overlap.
Make all code use connclose() and connkeep() when changing the "close
state" for a connection. These two macros take a string argument with an
explanation, and debug builds of curl will include that in the debug
output. Helps tracking connection re-use/close issues.
Commit 517b06d657 (in 7.36.0) that brought the CREDSPERREQUEST flag
only set it for HTTPS, making HTTP less good at doing connection re-use
than it should be. Now set it for HTTP as well.
Simple test case
"curl -v -u foo:bar localhost --next -u bar:foo localhos"
Bug: http://curl.haxx.se/mail/lib-2014-05/0127.html
Reported-by: Kamil Dudka
The variable wasn't assigned at all until step3 which would lead to a
failed connect never assigning the variable and thus returning a bad
value.
Reported-by: Larry Lin
Bug: http://curl.haxx.se/mail/lib-2014-04/0203.html
In commit 0b3750b5c2 (released in 7.36.0) we fixed a timeout issue
but instead broke the timings.
To fix this, I introduce a new timestamp to use for the timeouts and
restored the previous timestamp and timestamp position so that the old
timer functionality is restored.
In addition to that, that change also broke connection timeouts for when
more than one connect was used (as it would then count the total time
from the first connect and not for the most recent one). Now
Curl_timeleft() has been modified so that it checks against different
start times depending on which timeout it checks.
Test 1303 is updated accordingly.
Bug: http://curl.haxx.se/mail/lib-2014-05/0147.html
Reported-by: Ryan Braud
Whilst the qop directive isn't required to be present in a client's
response, as servers should assume a qop of "auth" if it isn't
specified, some may return authentication failure if it is missing.
To cater for the automatic generation of the new Visual Studio project
files, moved the lib file list into a separated variable so that lib
and lib/vtls can be referenced independently.
-p takes a list of Mozilla trust purposes and levels for certificates to
include in output. Takes the form of a comma separated list of
purposes, a colon, and a comma separated list of levels.
Now nghttp2_submit_request returns assigned stream ID, we don't have
to check stream ID using before_stream_send_callback. The
adjust_priority_callback was removed.
Depending on compiler line 3505 could generate the following warning or
error:
* warning: ISO C90 forbids mixed declarations and code
* A declaration cannot appear after an executable statement in a block
* error C2275: 'size_t' : illegal use of this type as an expression
As there's a default connection timeout and this wrongly used the
connection timeout during a transfer after the connection is completed,
this function would trigger timeouts during transfers erroneously.
Bug: http://curl.haxx.se/bug/view.cgi?id=1352
Figured-out-by: Radu Simionescu
If the precision is indeed shorter than the string, don't strlen() to
find the end because that's not how the precision operator works.
I also added a unit test for curl_msnprintf to make sure this works and
that the fix doesn't a few other basic use cases. I found a POSIX
compliance problem that I marked TODO in the unit test, and I figure we
need to add more tests in the future.
Reported-by: Török Edwin
Commit 07b66cbfa4 unfortunately broke native NTLM message support in
compilers, such as VC6, VC7 and others, that don't support long long
type declarations. This commit fixes VC6 and VC7 as they support the
__int64 extension, however, we should consider an additional fix for
other compilers that don't support this.
set.infilesize in this case was modified in several places, which could
lead to repeated requests using the same handle to get unintendent/wrong
consequences based on what the previous request did!
This makes the findprotocol() function work as intended so that libcurl
can properly be restricted to not support HTTP while still supporting
HTTPS - since the HTTPS handler previously set both the HTTP and HTTPS
bits in the protocol field.
This fixes --proto and --proto-redir for most SSL protocols.
This is done by adding a few new convenience defines that groups HTTP
and HTTPS, FTP and FTPS etc that should then be used when the code wants
to check for both protocols at once. PROTO_FAMILY_[protocol] style.
Bug: https://github.com/bagder/curl/pull/97
Reported-by: drizzt
As this makes curl_global_init_mem() behave the same way as
curl_global_init() already does in that aspect - the same number of
curl_global_cleanup() calls is then required to again decrease the
counter and then eventually do the cleanup.
Bug: http://curl.haxx.se/bug/view.cgi?id=1362
Reported-by: Tristan
ufds might not be allocated in case nfds overflows to zero while
extra_nfds is still non-zero. udfs is then accessed within the
extra_nfds-based for loop.
Should a command return untagged responses that contained no data then
the imap_matchresp() function would not detect them as valid responses,
as it wasn't taking the CRLF characters into account at the end of each
line.
Given that we presently support "auth" and not "auth-int" or "auth-conf"
for native challenge-response messages, added client side validation of
the quality-of-protection options from the server's challenge message.
To avoid urldata.h being included from the header file or that the
source file has the correct include order as highlighted by one of
the auto builds recently.
When CURL_DISABLE_CRYPTO_AUTH is defined the DIGEST-MD5 code should not
be included, regardless of whether USE__WINDOWS_SSPI is defined or not.
This is indicated by the definition of USE_HTTP_NEGOTIATE and USE_NTLM
in curl_setup.h.
Updated the docs to clarify and the code accordingly, with test 1528 to
verify:
When CURLHEADER_SEPARATE is set and libcurl is asked to send a request
to a proxy but it isn't CONNECT, then _both_ header lists
(CURLOPT_HTTPHEADER and CURLOPT_PROXYHEADER) will be used since the
single request is then made for both the proxy and the server.
When doing passive FTP, the multi state function needs to extract and
use the happy eyeballs sockets to wait for to check for completion!
Bug: http://curl.haxx.se/mail/lib-2014-02/0135.html (ruined)
Reported-by: Alan
In addition to commit fe260b75e7 fixed the same issue for RFC-821 based
SMTP servers and allow the credientials to be given to curl even though
they are not used with the server.
Specifying user credentials when the SMTP server doesn't support
authentication would cause curl to display "No known authentication
mechanisms supported!" and return CURLE_LOGIN_DENIED.
Reported-by: Tom Sparrow
Bug: http://curl.haxx.se/mail/lib-2014-03/0173.html
There are server certificates used with IP address in the CN field, but
we MUST not allow wild cart certs for hostnames given as IP addresses
only. Therefore we must make Curl_cert_hostcheck() fail such attempts.
Bug: http://curl.haxx.se/docs/adv_20140326B.html
Reported-by: Richard Moore
In addition to FTP, other connection based protocols such as IMAP, POP3,
SMTP, SCP, SFTP and LDAP require a new connection when different log-in
credentials are specified. Fixed the detection logic to include these
other protocols.
Bug: http://curl.haxx.se/docs/adv_20140326A.html
The debug messages printed inside PolarSSL always seems to end with a
newline. So 'infof()' should not add one. Besides the trace 'line'
should be 'const'.
Because of the socket is unblocking, PolarSSL does need call to getsock to
get the action to perform in multi environment.
In some cases, it might happen we have not received yet all data to perform
the handshake. ssh_handshake returns POLARSSL_ERR_NET_WANT_READ, the state
is updated but because of the getsock has not the proper #define macro to,
the library never prevents to select socket for input thus the socket will
never be awaken when last data is available. Thus it leads to timeout.
API has changed since version 1.3. A compatibility header has been created
to ensure forward compatibility for code using old API:
* x509 certificate structure has been renamed to from x509_cert to
x509_crt
* new dedicated setter for RSA certificates ssl_set_own_cert_rsa,
ssl_set_own_cert is for generic keys
* ssl_default_ciphersuites has been replaced by function
ssl_list_ciphersuites()
This patch drops the use of the compatibly header.
Rename x509_cert to x509_crt and add "compat-1.2.h"
include.
This would still need some more thorough conversion
in order to drop "compat-1.2.h" include.
Port number zero is perfectly allowed to connect to. I moved to storing
the remote port number in an int so that -1 means undefined and 0-65535
can be used for legitimate port numbers.
Setting the TIMER_STARTSINGLE timestamp first in CONNECT has the
drawback that for actions that go back to the CONNECT state, the time
stamp is reset and for the multi_socket API there's no corresponding
Curl_expire() then so the timeout logic gets wrong!
Reported-by: Brad Spencer
Bug: http://curl.haxx.se/mail/lib-2014-02/0036.html
Remove slash/backslash problem, now only slashes are used,
Wmake automaticaly translate slash/backslash to proper version or tools are not sensitive for it.
Enable spaces in path.
Use internal rm command for all host platforms
Add error message if old Open Watcom version is used. Some old versions exhibit build problems for Curl latest version. Now only versions 1.8, 1.9 and 2.O beta are supported
For HTTP/2, we may read up everything including responde body with
header fields in Curl_http_readwrite_headers. If no content-length is
provided, curl waits for the connection close, which we emulate it
using conn->proto.httpc.closed = TRUE. The thing is if we read
everything, then http2_recv won't be called and we cannot signal the
HTTP/2 stream has closed. As a workaround, we return nonzero from
data_pending to call http2_recv.
Original commit message was:
Don't omit CN verification in SChannel when an IP address is used.
Side-effect of this change:
SChannel and CryptoAPI do not support the iPAddress subjectAltName
according to RFC 2818. If present, SChannel will first compare the
IP address to the dNSName subjectAltNames and then fallback to the
most specific Common Name in the Subject field of the certificate.
This means that after this change curl will not connect to SSL/TLS
hosts as long as the IP address is not specified in the SAN or CN
of the server certificate or the verifyhost option is disabled.
This patch enables HTTP POST/PUT in HTTP2.
We disabled Expect header field and chunked transfer encoding
since HTTP2 forbids them.
In HTTP1, Curl sends small upload data with request headers, but
HTTP2 requires upload data must be in DATA frame separately.
So we added some conditionals to achieve this.
Perform more work in between sleeps. This is work around the
fact that axtls does not expose any knowledge about when work needs
to be performed. Depending on connection and how often perform is
being called this can save ~25% of time on SSL handshakes (measured
on 20ms latency connection calling perform roughly every 10ms).
When allowing NTLM, the re-use connection logic was too focused on
finding an existing NTLM connection to use and didn't properly allow
re-use of other ones. This made the logic not re-use perfectly re-usable
connections.
Added test case 1418 and 1419 to verify.
Regression brought in 8ae35102c (curl 7.35.0)
Reported-by: Jeff King
Bug: http://thread.gmane.org/gmane.comp.version-control.git/242213
For a function that returns a decoded version of a string, it seems
really strange to allow a NULL pointer to get passed in which then
prevents the decoded data from being returned!
This functionality was not documented anywhere either.
If anyone would use it that way, that memory would've been leaked.
Bug: https://github.com/bagder/curl/pull/90
Reported-by: Arvid Norberg
Make sure that the special NTLM magic we do is for HTTP+NTLM only since
that's where the authenticated connection is a weird non-standard
paradigm.
Regression brought in 8ae35102c (curl 7.35.0)
Bug: http://curl.haxx.se/mail/lib-2014-02/0100.html
Reported-by: Dan Fandrich
The code didn't properly check the return codes to detect overflows so
it could trigger incorrectly. Like on mingw32.
Regression introduced in 345891edba (curl 7.35.0)
Bug: http://curl.haxx.se/mail/lib-2014-02/0097.html
Reported-by: LM
when using --http2 one can now selectively disable NPN or ALPN with
--no-alpn and --no-npn. for now honored with NSS only.
TODO: honor this option with GnuTLS and OpenSSL
SSL_ENABLE_ALPN can be used for preprocessor ALPN feature detection,
but not SSL_NEXT_PROTO_SELECTED, since it is an enum value and not a
preprocessor macro.
Not comma, which is an inconsistency and a mistake probably inherited
from the examples section of RFC1867.
This bug has been present since the day curl started to support
multipart formposts, back in the 90s.
Reported-by: Rob Davies
Bug: http://curl.haxx.se/bug/view.cgi?id=1333
When using the multi socket interface, libcurl calls the
curl_multi_timer_callback asking to be woken up after
CURL_TIMEOUT_EXPECT_100 milliseconds.
After the timeout has expired, calling curl_multi_socket_action with
CURL_SOCKET_TIMEOUT as sockfd leads libcurl to check expired
timeouts. When handling the 100-continue one, the following check in
Curl_readwrite() fails if exactly CURL_TIMEOUT_EXPECT_100 milliseconds
passed since the timeout has been set!
It seems logical to consider that having waited for exactly
CURL_TIMEOUT_EXPECT_100 ms is enough.
Bug: http://curl.haxx.se/bug/view.cgi?id=1334
A server might respond with a content-encoding header and a response
that was encoded accordingly in HTTP-draft-09/2.0 mode, even if the
client did not send an accept-encoding header earlier. The server might
not send a content-encoding header if the identity encoding was used to
encode the response.
See:
http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-9.3
This patch chooses different approach to integrate HTTP2 into HTTP curl
stack. The idea is that we insert HTTP2 layer between HTTP code and
socket(TLS) layer. When HTTP2 is initialized (either in NPN or Upgrade),
we replace the Curl_recv/Curl_send callbacks with HTTP2's, but keep the
original callbacks in http_conn struct. When sending serialized data by
nghttp2, we use original Curl_send callback. Likewise, when reading data
from network, we use original Curl_recv callback. In this way we can
treat both TLS and non-TLS connections.
With this patch, one can transfer contents from https://twitter.com and
from nghttp2 test server in plain HTTP as well.
The code still has rough edges. The notable one is I could not figure
out how to call nghttp2_session_send() when underlying socket is
writable.
Check the NPN result before preparing an HTTP request and switch into
HTTP/2.0 mode if necessary. This is a work in progress, the actual code
to prepare and send the request using nghttp2 is still missing from
Curl_http2_send_request().
the number of elements in the 'nghttp2_session_callbacks' structure is
now reduced by 2 in version 0.3.0 (I'm not sure when the change
happened, but checking for ver 0.3.0 work for me).
Something is wrong in 'userp' for the HTTP2 recv_callback(). The
session is created using bogus user-data; '&conn' and not 'conn'.
I noticed this since the socket-value in Curl_read_plain() was set to a
impossible high value.
hostcache_timestamp_remove() should remove old *unused* entries from the
host cache, but it never checked whether the entry was actually in
use. This complements commit 030a2b8cb.
Bug: http://curl.haxx.se/bug/view.cgi?id=1327
tftp_done() can get called with its TFTP state pointer still being NULL
on an early time-out, which caused a segfault when dereferenced.
Reported-by: Glenn Sheridan
Bug: http://curl.haxx.se/mail/lib-2014-01/0246.html
Make it possible to call
curl_easy_getinfo(curl, CURLINFO_CONTENT_LENGTH_DOWNLOAD, &filesize)
and related functions on remote sftp:// files, without downloading them.
Reported-by: Yingwei Liu
Bug: http://curl.haxx.se/mail/lib-2014-01/0139.html
This prevents sending a `Content-Length: -1` header, e.g this ocurred
with the following combination:
* standard HTTP POST (no chunked encoding),
* user-defined read function set,
* `CURLOPT_POSTFIELDSIZE(_LARGE)` NOT set.
With this fix it now behaves like HTTP PUT.
Make GnuTLS old and new consistent, specify the desired protocol, cipher
and certificate type in always in both modes. Disable insecure ciphers
as reported by howsmyssl.com. Honor not only --sslv3, but also the
--tlsv1[.N] switches.
Related Bug: http://curl.haxx.se/bug/view.cgi?id=1323
conversion from 'curl_off_t' to 'size_t', possible loss of data
Where curl_off_t is a 64-bit word and size_t is 32-bit - for example
with 32-bit Windows builds.
1 - allow >31 bit max-age values
2 - don't overflow on extremely large max-age values when we add the
value to the current time
3 - make sure max-age takes precedence over expires as dictated by
RFC6265
Bug: http://curl.haxx.se/mail/lib-2014-01/0130.html
Reported-by: Chen Prog
Starting with Visual Studio 2013 (VC12) and Windows 8.1 the
GetVersionInfoEx() function has been marked as deprecated and it's
return value atered. Updated connect.c and curl_sspi.c to use
VerifyVersionInfo() where possible, which has been available since
Windows 2000.
A transfer timeout could result in an error message such as "Operation
timed out after 3000 milliseconds with 19 bytes of -1 received". This
patch removes the non-sensical "of -1" when the size of the transfer
is unknown, mirroring the logic in lib/transfer.c
By default even recent versions of OpenSSL support and accept both
"export strength" ciphers, small-bitsize ciphers as well as downright
deprecated ones.
This change sets a default cipher set that avoids the worst ciphers, and
subsequently makes https://www.howsmyssl.com/a/check no longer grade
curl/OpenSSL connects as 'Bad'.
Bug: http://curl.haxx.se/bug/view.cgi?id=1323
Reported-by: Jeff Hodges
With the recently added timeout "reminder" functionality, there's no
reason left for us to execute timeout code before the time is
ripe. Simplifies the handling too.
This will make the *TIMEOUT and *CONNECTTIMEOUT options more accurate
again, which probably is most important when the *_MS versions are used.
In multi_socket, make sure to update 'now' after having handled activity
on a socket.
BACKGROUND:
We have learned that on some systems timeout timers are inaccurate and
might occasionally fire off too early. To make the multi_socket API work
with this, we made libcurl execute timeout actions a bit early too if
they are within our MULTI_TIMEOUT_INACCURACY. (added in commit
2c72732ebf, present since 7.21.0)
Switching everything to the multi API made this inaccuracy problem
slightly more notable as now everyone can be affected.
Recently (commit 21091549c0) we tweaked that inaccuracy value to make
timeouts more accurate and made it platform specific. We also figured
out that we have code at places that check for fixed timeout values so
they MUST NOT run too early as then they will not trigger at all (see
commit be28223f35 and a691e04470) - so there are definitately problems
with running timeouts before they're supposed to run. (We've handled
that so far by adding the inaccuracy margin to those specific timeouts.)
The libcurl multi_socket API tells the application with a callback that
a timeout expires in N milliseconds (and it explicitly will not tell it
again for the same timeout), and the application is then supposed to
call libcurl when that timeout expires. When libcurl subsequently gets
called with curl_multi_socket_action(...CURL_SOCKET_TIMEOUT...), it
knows that the application thinks the timeout expired - and alas, if it
is within the inaccuracy level libcurl will run code handling that
handle.
If the application says CURL_SOCKET_TIMEOUT to libcurl and _isn't_
within the inaccuracy level, libcurl will not consider the timeout
expired and it will not tell the application again since the timeout
value is still the same.
NOW:
This change introduces a modified behavior here. If the application says
CURL_SOCKET_TIMEOUT and libcurl finds no timeout code to run, it will
inform the application about the timeout value - *again* even if it is
the same timeout that it already told about before (although libcurl
will of course tell it the updated time so that it'll still get the
correct remaining time). This way, we will not risk that the application
believes it has done its job and libcurl thinks the time hasn't come yet
to run any code and both just sit waiting. This also allows us to
decrease the MULTI_TIMEOUT_INACCURACY margin, but that will be handled
in a separate commit.
A repeated timeout update to the application risk that the timeout will
then fire again immediately and we have what basically is a busy-loop
until the time is fine even for libcurl. If that becomes a problem, we
need to address it.
The net effect of this bug as it appeared to users, would be that
libcurl would timeout in the connect phase.
When disabling IPv6 use but still using getaddrinfo, libcurl would
wrongly not init the "hints" struct field in init_thread_sync() which
would subsequently lead to a getaddrinfo() invoke with a zeroed hints
with ai_socktype set to 0 instead of SOCK_STREAM. This would lead to
different behaviors on different platforms but basically incorrect
output.
This code was introduced in 483ff1ca75, released in curl 7.20.0.
This bug became a problem now due to the happy eyeballs code and how
libcurl now traverses the getaddrinfo() results differently.
Bug: http://curl.haxx.se/mail/lib-2014-01/0061.html
Reported-by: Fabian Frank
Debugged-by: Fabian Frank
Removed some of the infof() calls that were added with the recent
pipeline improvements but they're not useful to the vast majority of
readers and the pipelining seems to fundamentaly work - the debugging
outputs can easily be added there if debugging these functions is needed
again.
When the requested authentication bitmask includes NTLM, we cannot
re-use a connection for another username/password as we then risk
re-using NTLM (connection-based auth).
This has the unfortunate downside that if you include NTLM as a possible
auth, you cannot re-use connections for other usernames/passwords even
if NTLM doesn't end up the auth type used.
Reported-by: Paras S
Patched-by: Paras S
Bug: http://curl.haxx.se/mail/lib-2014-01/0046.html
When the progress callback returned 1 at a very early state, the code
would not make CURLE_ABORTED_BY_CALLBACK get returned but the process
would still be interrupted. In the HTTP case, this would then cause a
CURLE_GOT_NOTHING to erroneously get returned instead.
Reported-by: Petr Novak
Bug: http://curl.haxx.se/bug/view.cgi?id=1318
This is a debug function only and serves no purpose in production code,
it only slows things down. I left the code #ifdef'ed for possible future
pipeline debugging.
Also, this was a global function without proper namespace usage.
Reported-by: He Qin
Bug: http://curl.haxx.se/bug/view.cgi?id=1320
If OpenSSL is built to support SSLv2 this brings back the ability to
explicitly select that as a protocol level.
Reported-by: Steve Holme
Bug: http://curl.haxx.se/mail/lib-2014-01/0013.html
Some feedback provided by byte_bucket on IRC pointed out that commit
db11750cfa wasn’t really correct because it allows for “upgrading” to a
newer protocol when it should be only allowing for SSLv3.
This change fixes that.
When SSLv3 connection is forced, don't allow SSL negotiations for newer
versions. Feedback provided by byte_bucket in #curl. This behavior is
also consistent with the other force flags like --tlsv1.1 which doesn't
allow for TLSv1.2 negotiation, etc
Feedback-by: byte_bucket
Bug: http://curl.haxx.se/bug/view.cgi?id=1319
Since ad34a2d5c8 (present in 7.34.0 release) forcing
SSLv3 will always return the error "curl: (35) Unsupported SSL protocol
version" Can be replicated with `curl -I -3 https://www.google.com/`.
This fix simply allows for v3 to be forced.
Following commit 0aafd77fa4, replaced the internal usage of
FORMAT_OFF_T and FORMAT_OFF_TU with the external versions that we
expect API programmers to use.
This negates the need for separate definitions which were subtly
different under different platforms/compilers.
Added support to the built-in printf() replacement functions, for these
non-ANSI extensions when compiling under Visual Studio, Borland, Watcom
and MinGW.
This fixes problems when generating libcurl source code that contains
curl_off_t variables.
Fixes a bug when all addresses in the first family fail immediately, due
to "Network unreachable" for example, curl would hang and never try the
next address family.
Iterate through all address families when to trying establish the first
connection attempt.
Bug: http://curl.haxx.se/bug/view.cgi?id=1315
Reported-by: Michal Górny and Anthony G. Basile
Introduced in commit 2a4ee0d221 sending of data via the FILE
protocol would always return CURLE_WRITE_ERROR regardless of whether
CURL_WRITEFUNC_PAUSE was returned from the callback function or not.
Make sure that we detect such attempts and return a proper error code
instead of silently handling this in problematic ways.
Updated the documentation to mention this limitation.
Bug: http://curl.haxx.se/bug/view.cgi?id=1286
Previously this memdebug free() replacement didn't properly work with a
NULL argument which has made us write code that avoids calling
free(NULL) - which causes some extra nuisance and unnecessary code.
Starting now, we should allow free(NULL) even when built with the
memdebug system enabled.
free(NULL) is permitted by POSIX
free() itself allows a NULL input but our memory debug system requires
Curl_safefree() to be used instead when a "legitimate" NULL may be freed. Like
in the code here.
Pointed-out-by: Steve Holme
If a user indicated they preferred to authenticate using a SASL
mechanism, but SASL authentication wasn't supported by the server, curl
would always fall back to clear text when CAPABILITY wasn't supported,
even though the user didn't want to use this.
If a user indicated they preferred to authenticate using APOP or a SASL
mechanism, but neither were supported by the server, curl would always
fall back to clear text when CAPA wasn't supported, even though the
user didn't want to use this.
This also fixes the auto build failure caused by commit 6f2d5f0562.
This commit replaces that of 9f260b5d66 because according to RFC-2449,
section 6, there is no APOP capability "...even though APOP is an
optional command in [POP3]. Clients discover server support of APOP by
the presence in the greeting banner of an initial challenge enclosed in
angle brackets."
The FILE:// code doesn't support this option - and it doesn't make sense
to support it as long as it works as it does since then it'd only block
even longer.
But: setting CURLOPT_MAX_RECV_SPEED_LARGE would make the transfer first
get done and then libcurl would wait until the average speed would get
low enough. This happened because the transfer happens completely in the
DO state for FILE:// but then it would still unconditionally continue in
to the PERFORM state where the speed check is made.
Starting now, the code will skip from DO_DONE to DONE immediately if no
socket is set to be recv()ed or send()ed to.
Bug: http://curl.haxx.se/bug/view.cgi?id=1312
Reported-by: Mohammad AlSaleh
The comment in the code mentions the zero terminating after having
copied data, but it mistakingly zero terminated the source data and not
the destination! This caused the test 864 problem discussed on the list:
http://curl.haxx.se/mail/lib-2013-12/0113.html
Signed-off-by: Daniel Stenberg <daniel@haxx.se>
Although highlighted by a bug in commit 1cfb436a2f, APOP
authentication could be chosen if the server was to reply with an empty
or missing timestamp in the server greeting and APOP was given in the
capability list by the server.
Added a loop to pop3_statemach_act() in which Curl_pp_readresp() is
called until the cache is drained. Without this multiple responses
received in a single packet could result in a hang or delay.
Similar to the processing of untagged CAPABILITY responses in IMAP and
multi-line EHLO responses in SMTP, moved the processing of multi-line
CAPA responses to pop3_state_capa_resp().
In an effort to reduce what pop3_endofresp() does and bring the POP3
source back inline with the IMAP and SMTP protocols, moved the APOP
detection into pop3_state_servergreet_resp().
Added support for downgrading the SASL authentication mechanism when the
decoding of CRAM-MD5, DIGEST-MD5 and NTLM messages fails. This enhances
the previously added support for graceful cancellation by allowing the
client to retry a lesser SASL mechanism such as LOGIN or PLAIN, or even
APOP / clear text (in the case of POP3 and IMAP) when supported by the
server.
In preparation for the upcoming SASL downgrade feature renamed the
imap__perform_authenticate(), pop3__perform_authenticate() and
smtp__perform_authenticate() functions.
Security flaw CVE-2013-6422
This is conceptually the same problem and fix that 3c3622b6 brought to the
OpenSSL backend and that resulted in CVE-2013-4545.
This version of the problem was independently introduced to the GnuTLS
backend with commit 59cf93cc, present in the code since the libcurl
7.21.4 release.
Advisory: http://curl.haxx.se/docs/adv_20131217.html
Bug: http://curl.haxx.se/mail/lib-2013-11/0214.html
Reported-by: Marc Deslauriers
Since all systems have inaccuracy in the timeout handling it is
imperative that we add an inaccuracy margin to the general timeout and
connecttimeout handling with the multi interface. This way, when the
timeout fires we should be fairly sure that it has passed the timeout
value and will be suitably detected.
For cases where the timeout fire before the actual timeout, we would
otherwise consume the timeout action and still not run the timeout code
since the condition wasn't met.
Reported-by: He Qin
Bug: http://curl.haxx.se/bug/view.cgi?id=1298
To avoid the regression when users pass in passwords containing semi-
colons, we now drop the ability to set the login options with the same
options. Support for login options in CURLOPT_USERPWD was added in
7.31.0.
Test case 83 was modified to verify that colons and semi-colons can be
used as part of the password when using -u (CURLOPT_USERPWD).
Bug: http://curl.haxx.se/bug/view.cgi?id=1311
Reported-by: Petr Bahula
Assisted-by: Steve Holme
Signed-off-by: Daniel Stenberg <daniel@haxx.se>
It is not 100% clear whether * should include clear text LOGIN or not
from RFC-5092, however, including it is then consistent with current
POP3 behaviour where clear text, APOP or SASL may be chosen.
If a specific SASL authentication mechanism was requested by the user
as part of the login options but wasn't supported by the server then
curl would fallback to clear text, when it shouldn't, rather than
reporting "No known authentication mechanisms supported" as the POP3
and SMTP protocols do.
In C, signed integer overflow is undefined behavior. Thus, the compiler
is allowed to assume that it will not occur. In the check for an
overflow, the developer assumes that the signed integer of type time_t
will wrap around if it overflows. However, this behavior is undefined in
the C standard. Thus, when the compiler sees this, it simplifies t +
delta < t to delta < 0. Since delta > 0 and delta < 0 can't both be
true, the entire if statement is optimized out under certain
optimization levels. Thus, the parsedate function would return
PARSEDATE_OK with an undefined value in the time, instead of return -1 =
PARSEDATE_FAIL.
The comment here says that SecKeychainSearch causes a deprecation
warning when used with a minimum Mac OS X SDK version of 10.7.0, which
is correct. However, the #if guard did not match. It was intended to
only use the code if 10.6.0 support was enabled, but it had 10.7.0
instead. This caused a warning if the minimum was exactly 10.7.0.
The URI that is passed in as part of the Authorization: header needs to
be cut off at '?' if CURLAUTH_DIGEST_IE is set. Previously the code only
did when calculating the MD5sum.
Bug: http://curl.haxx.se/bug/view.cgi?id=1308
Patched-by: Sergey Tatarincev
POP3_TYPE_ANY, or ~0, is written to pop3c->preftype in lib/pop3c.c, an
unsigned int variable. The result of ~0 is -1, which caused a warning
due to writing a negative number to an unsigned variable. To fix this,
make the expression ~0U so that its value is considered the unsigned
number UINT_MAX which is what SASL_AUTH_ANY does in curl_sasl.h.
1) Renamed curl_tlsinfo to curl_tlssessioninfo as discussed on the
mailing list.
2) Renamed curl_ssl_backend to curl_sslbackend so it doesn't follow our
function naming convention.
3) Updated sessioninfo.c example accordingly.
This fixes a NULL dereference in the case where the client asks for
CURLINFO_TLS_SESSION data after the (TLS) session has already been
destroyed (i.e. curl_easy_perform has already completed for this
handle). Instead of crashing, we now return a CURLSSLBACKEND_NONE
error.
This is an extension to the fix in 7d80ed64e4. We may
call Curl_disconnect() while cleaning up the multi handle,
which could lead to openssl sending packets, which could get
a SIGPIPE.
Signed-off-by: Jeff King <peff@peff.net>
Commit 7d80ed64e4 introduced some helpers to handle
sigpipe in easy.c. However, that fix was incomplete, and we
need to add more callers in other files. The first step is
making the helpers globally accessible.
Since the functions are small and should generally end up
inlined anyway, we simply define them in the header as
static functions.
Signed-off-by: Jeff King <peff@peff.net>
This fixes a rare Happy Eyeballs bug where if the first IP family runs
out of addresses before the second-family-timer fires, and the second
IP family's first connect fails immediately, no further IPs of the
second family are attempted.
When adding entries to the DNS cache with CURLOPT_RESOLVE, they are
marked 'inuse' forever to prevent them from ever being removed in normal
operations. Still, the code that pruned out-of-date DNS entries didn't
care for the 'inuse' struct field and pruned it anyway!
Reported-by: Romulo A. Ceccon
Bug: http://curl.haxx.se/bug/view.cgi?id=1303
Added new API for returning a SSL backend type and pointer, in order to
allow access to the TLS internals, that may then be used to obtain X509
certificate information for example.
Otherwise a NOOP operation would be performed which a) only returns a
single line response and not a multiline response where -I needs to be
used, and b) provides an inconsistent user experience compared to that
of the POP3 and IMAP protocols.
singleipconnect() could return the file descriptor of an open socket
even though the function returned a CURLE_COULDNT_CONNECT error code
from commit ed1662c374 and 02fbc26d59.
This could cause tests 19, 704 and 1233 to fail on FreeBSD, AIX and
Solaris.
Incorrectly processed multiline server greeting responses as "wanted"
continue responses in smtp_endofresp(), from commit f16c0de4e9,
which in turn broke the SMTP server detection in the test suite,
because the EHLO command would not be sent.
Added a loop to smtp_statemach_act() in which Curl_pp_readresp() is
called until the cache is drained. Without this multiple responses
received in a single packet could result in a hang or delay.
Similar to the processing of untagged CAPABILITY responses in IMAP moved
the processing of multiline EHLO responses to smtp_state_ehlo_resp() and
introduced an internal response code of one to differentiate a multiline
continuation from the end of command. This also allows for the separate
processing of multiline responses from commands such as VRFY and EXPN.
singleipconnect() did not return the open socket descriptor on some
errors, thereby sometimes causing a socket leak. This patch ensures
the socket is always returned.
Even though this is only a formality (since not many people build on
Mavericks while targeting Leopard), since we still support Leopard
at the earliest, we might as well be pedantic.
It turns out that some of the constants necessary to make this feature
work are missing from Snow Leopard's Security framework even though
they are defined in the headers.
Bug: http://curl.haxx.se/mail/lib-2013-11/0076.html
Reported by: myriachan
Rather than set the authentication options as part of the login details
specified in the URL, or via the older CURLOPT_USERPWD option, added a
new libcurl option to allow the login options to be set separately.
This patch fixes and issue introduced in commit 7d7df83198, if the
tunnel state was TUNNEL_CONNECT, waitconnect_getsock() would return a
bitmask indicating a readable socket but never stored the socket in the
return array.
Our own printf() replacement clearly can't properly handle %.*s with a
string that isn't zero terminated. Instead of fixing the printf code or
even figuring out what the proper posix behavior is, I reverted this
piece of the code back to the previous version where it does malloc +
memcpy instead.
Regression added in e839446c2a, released in curl 7.32.0.
Reported-by: Felix Yan
Bug: http://curl.haxx.se/bug/view.cgi?id=1295
This patch adds a 200ms delay between the first and second address
family socket connection attempts.
It also iterates over IP addresses in the order returned by the
system, meaning most dual-stack systems will try IPv6 first.
Additionally, it refactors the connect code, removing most code that
handled synchronous connects. Since all sockets are now non-blocking,
the logic can be made simpler.
nss.c:702: warning: pointer targets in passing argument 3 of
'Curl_extract_certinfo' differ in signedness
nss.c:702: warning: pointer targets in passing argument 4 of
'Curl_extract_certinfo' differ in signedness
Made sure the cast was correctly "unsigned char *" to "char *" and not
"unsigned char *" to "unsigned char *".
nss.c:700: warning: pointer targets in passing argument 3 of
'Curl_extract_certinfo' differ in signedness
nss.c:700: warning: pointer targets in passing argument 4 of
'Curl_extract_certinfo' differ in signedness
Introduced in commit 7d7df83198 curl would loop displaying "Whut?"
if it was trying to connect to an address and port that didn't have
anything listening on it.
Renamed copy_header_value() to Curl_copy_header_value() as this
function is now non static.
Simplified proxy flag in Curl_http_input_auth() when calling
sub-functions.
Removed unnecessary white space removal when using negotiate as it had
been missed in commit cdccb42267.
...following recent changes to Curl_base64_decode() rather than trying
to parse a header line for the authentication mechanisms which is CRLF
terminated and inline zero terminate it.
...following recent changes to Curl_base64_decode() rather than trying
to parse a header line for the authentication mechanisms which is CRLF
terminated and inline zero terminate it.
The code rejected 0 as a valid timeout while in fact the function could
indeed legitimately return that and it should be respected.
Reported-by: Bjorn Stenberg
A base64 string should be a multiple of 4 characters in length, not
contain any more than 2 padding characters and only contain padding
characters at the end of string. For example: Y3VybA==
Strings such as the following are considered invalid:
Y= - Invalid length
Y== - Invalid length
Y=== - More than two padding characters
Y=x= - Padding character contained within string
This patch fixes a bug in Happy Eyeballs where curl would wait for a
connect response from socket1 before checking socket2.
Also, it updates error messages for failed connections, showing the ip
addresses that failed rather than just the host name repeatedly.
Bug: http://curl.haxx.se/mail/lib-2013-10/0236.html
Reported-by: Paul Marks
This patch invokes two socket connect()s nearly simultaneously, and
the socket that is first connected "wins" and is subsequently used for
the connection. The other is terminated.
There is a very slight IPv4 preference, in that if both sockets connect
simultaneously IPv4 is checked first and thus will win.
Should a client application fail to decode an authentication message
received from a server, or not support any of the parameters given by
the server in the message, then the authentication phrase should be
cancelled gracefully by the client rather than simply terminating the
connection.
The authentication phrase should be cancelled by simply sending a '*'
to the server, in response to erroneous data being received, as per
RFC-3501, RFC-4954 and RFC-5034.
This patch adds the necessary state machine constants and appropriate
response handlers in order to add this functionality for the CRAM-MD5,
DIGEST-MD5 and NTLM authentication mechanisms.
This is a regression since the switch to always-multi internally
c43127414d.
Test 1316 was modified since we now clearly call the Curl_client_write()
function when doing the LIST transfer part and then the
handler->protocol says FTP and ftpc.transfertype is 'A' which implies
text converting even though that the response is initially a HTTP
CONNECT response in this case.
This workaround had been previously been implemented for IMAP and POP3
but not SMTP. Some of the recent test case additions implemented this
behaviour to emulate a bad server and the SMTP code didn't cope with it.
... if not already initialized. This fixes a regression introduced by
commit 4ad8e142da, which caused test619
to intermittently fail on certain machines (namely Fedora build hosts).
Changed the failure code when TLS v1.1 and v1.2 is requested but not
supported by older OpenSSL versions, following review from libcurl
peers, and reduced the number of required preprocessor if statements.
...with the use of CURL_SSLVERSION_TLSv1_1 and CURL_SSLVERSION_TLSv1_2
being conditional on OpenSSL v1.0.1 as the appropriate flags are not
supported under earlier versions.
Commit ad34a2d5c8 relies on definitions that are only present in
OpenSSL v1.0.1 and up. This quick fix allows the builds that use
older versions of OpenSSL to continue building.
According to the documentation for libssh2_userauth_list(), a NULL
return value is not necessarily an error. You must call
libssh2_userauth_authenticated() to determine if the SSH_USERAUTH_NONE
request was successful.
This fixes a segv when using sftp on a server that allows logins with an
empty password. When NULL was interpreted as an error, it would
free the session but not flag an error since the libssh2 errno would be
clear. This resulted in dereferencing a NULL session pointer.
Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
CURL_SSLVERSION_TLSv1_0, CURL_SSLVERSION_TLSv1_1,
CURL_SSLVERSION_TLSv1_2 enum values are added to force exact TLS version
(CURL_SSLVERSION_TLSv1 means TLS 1.x).
axTLS:
axTLS only supports TLS 1.0 and 1.1 but it cannot be set that only one
of these should be used, so we don't allow the new enum values.
darwinssl:
Added support for the new enum values.
SChannel:
Added support for the new enum values.
CyaSSL:
Added support for the new enum values.
Bug: The original CURL_SSLVERSION_TLSv1 value enables only TLS 1.0 (it
did the same before this commit), because CyaSSL cannot be configured to
use TLS 1.0-1.2.
GSKit:
GSKit doesn't seem to support TLS 1.1 and TLS 1.2, so we do not allow
those values.
Bugfix: There was a typo that caused wrong SSL versions to be passed to
GSKit.
NSS:
TLS minor version cannot be set, so we don't allow the new enum values.
QsoSSL:
TLS minor version cannot be set, so we don't allow the new enum values.
OpenSSL:
Added support for the new enum values.
Bugfix: The original CURL_SSLVERSION_TLSv1 value enabled only TLS 1.0,
now it enables 1.0-1.2.
Command-line tool:
Added command line options for the new values.
Setting only CURLOPT_SSL_VERIFYHOST without CURLOPT_SSL_VERIFYPEER set
should still verify that the host name fields in the server certificate
is fine or return failure.
Bug: http://curl.haxx.se/mail/lib-2013-10/0002.html
Reported-by: Ishan SinghLevett
If no WINVER and/or _WIN32_IWNNT define was set, the Windows platform
SDK often defaults to high value, e.g. 0x601 (whoch may probably depend
on the Windows version being used, in my case Windows 7).
If WINVER >= 0x600 then winsock2.h includes some defines for WSAPoll(),
e.g. POLLIN, POLLPRI, POLLOUT etc. These defines clash with cURL's
lib/select.h.
Make sure HAVE_STRUCT_POLLFD is defined then.
Bug: http://curl.haxx.se/bug/view.cgi?id=1282
Reported-by: "kdekker"
Patch-by: Marcel Raad
Moved the standard SASL mechanism strings into curl_sasl.h rather than
hard coding the same values over and over again in the protocols that
use SASL authentication.
For more information about the mechanism strings see:
http://www.iana.org/assignments/sasl-mechanisms
In ossl_connect_step2() when the "Unknown SSL protocol error" occurs, it
would output the local port number instead of the remote one which
showed when doing SSL over a proxy (but with the correct remote host
name). As libcurl only speaks SSL to the remote we know it is the remote
port.
Bug: http://curl.haxx.se/bug/view.cgi?id=1281
Reported-by: Gordon Marler
Added the ability to use an XOAUTH2 bearer token [RFC6750] with POP3 for
authentication using RFC6749 "OAuth 2.0 Authorization Framework".
The bearer token is expected to be valid for the user specified in
conn->user. If CURLOPT_XOAUTH2_BEARER is defined and the connection has
an advertised auth mechanism of "XOAUTH2", the user and access token are
formatted as a base64 encoded string and sent to the server as
"AUTH XOAUTH2 <bearer token>".
iOS 7 finally added the option to enable 1/n-1 when using TLS 1.0
and a CBC cipher, so we now always turn that on unless the user
manually turns it off using CURLSSLOPT_ALLOW_BEAST.
It appears Apple also added some new PSK ciphers, but no interface to
use them yet, so we at least support printing them if we find them.
Implement: Expired Cookies These following situation, curl removes
cookie(s) from struct CookieInfo if the cookie expired.
- Curl_cookie_add()
- Curl_cookie_getlist()
- cookie_output()
Solaris with the SunStudio Compiler is reportedly missing this define,
but as we're using it without any good reason on all the places it was
used I've now instead switched to just use sensible buffer sizes that
fit a 32 bit decimal number. Which also happens to be smaller than the
common NI_MAXSERV value which is 32 on most machines.
Bug: http://curl.haxx.se/bug/view.cgi?id=1277
Reported-by: D.Flinkmann
Otherwise, the FTP protocol would unnecessarily hang 60 seconds if
aborted in the CURLOPT_HEADERFUNCTION callback.
Reported by: Tomas Mlcoch
Bug: https://bugzilla.redhat.com/1005686
Make sure that the custom struct fields are only used by code that
doesn't use a struct defintion from the outside.
Attempts to fix the problem introduced in 3dc6fc42bf
Otherwise the connection can get stuck during various phases, waiting
for new data on the socket using select() etc., but it will never be
received as the data has already been read into SSL library.
The transfer size would be calculated incorrectly if the email contained
within the FETCH response, had been partially received by the pingpong
layer. As such the following, example output, would be seen if the
amount remaining was smaller than the amount received:
* Excess found in a non pipelined read: excess = 1394, size = 262,
maxdownload = 262, bytecount = 1374
* transfer closed with -1112 bytes remaining to read
Bug: http://curl.haxx.se/mail/lib-2013-08/0170.html
Reported-by: John Dunn
When building the code using LLVM Clang without NGHTTP2, I was getting
this warning:
../lib/http.h:155:1: warning: empty struct is a GNU extension [-Wgnu]
Placing a dummy variable into the data structure silenced the warning.
Recent OpenSSL uses user interface abstraction to negotiate access to
private keys in the cryprographical engines. An OpenSSL application is
expected to implement the user interface. Otherwise a default one
provided by OpenSSL (interactive standard I/O) will be used and the
aplication will have no way how to pass a password to the engine.
Longer-desc: http://curl.haxx.se/mail/lib-2013-08/0265.html
Using the first little merge of nghttp2 into libcurl, I stumbeled on the
missing 'snprintf' in MSVCRT. Isn't this how we do it for other libcurl
files? I.e. use 'curl_msnprintf' and not 'snprintf' directly:
When an error occurs parsing an LDAP URL, The ludp->lud_attrs[i] entries
could be freed even though they sometimes point to data within an
allocated area.
This change introduces a lud_attrs_dup[] array for the duplicated string
pointers, and it removes the unused lud_exts array.
Bug: http://curl.haxx.se/mail/lib-2013-08/0209.html
XOAUTH2 would be selected in preference to LOGIN and PLAIN if the IMAP
or SMTP server advertised support for it even though a user's password
was supplied but bearer token wasn't.
Modified the selection logic so that XOAUTH2 will only be selected if
the server supports it and A) The curl user/libcurl programmer has
specifically asked for XOAUTH via the ;AUTH=XOAUTH login option or 2)
The bearer token is specified. Obviously if XOAUTH is asked for via
the login option but no token is specified the user will receive a
authentication failure which makes more sense than no known
authentication mechanisms supported!
'struct monitor', introduced in 6cf8413e, already exists in an IRIX
header file (sys/mon.h) which gets included via various standard headers
by lib/easy.c
cc-1101 cc: ERROR File = ../../curl/lib/easy.c, Line = 458
"monitor" has already been declared in the current scope.
Reported-by: Tor Arntsen
When waiting for a 100-continue response from the server, the
Curl_readwrite() will refuse to run if called until the timeout has been
reached.
We timeout code in multi_socket() allows code to run slightly before the
actual timeout time, so for test 154 it could lead to the function being
executed but refused in Curl_readwrite() and then the application would
just sit idling forever.
This was detected with runtests.pl -e on test 154.
I brought back security.h in commit bb55293313. As we actually
already found out back in 2005 in commit 62970da675, the file name
security.h causes problems so I renamed it curl_sec.h instead.
Added the ability to use an XOAUTH2 bearer token [RFC6750] with SMTP for
authentication using RFC6749 "OAuth 2.0 Authorization Framework".
The bearer token is expected to be valid for the user specified in
conn->user. If CURLOPT_XOAUTH2_BEARER is defined and the connection has
an advertised auth mechanism of "XOAUTH2", the user and access token are
formatted as a base64 encoded string and sent to the server as
"AUTH XOAUTH2 <bearer token>".
Added the ability to use an XOAUTH2 bearer token [RFC6750] with IMAP for
authentication using RFC6749 "OAuth 2.0 Authorization Framework".
The bearer token is expected to be valid for the user specified in
conn->user. If CURLOPT_XOAUTH2_BEARER is defined and the connection has
an advertised auth mechanism of "XOAUTH2", the user and access token are
formatted as a base64 encoded string and sent to the server as
"A001 AUTHENTICATE XOAUTH2 <bearer token>".
Added the ability to specify an XOAUTH2 bearer token [RFC6750] via the
option CURLOPT_XOAUTH2_BEARER for authentication using RFC6749 "OAuth
2.0 Authorization Framework".
Added the ability to generated a base64 encoded XOAUTH2 token
containing: "user=<username>^Aauth=Bearer <bearer token>^A^A"
as per RFC6749 "OAuth 2.0 Authorization Framework".
We've announced this pending removal for a long time and we've
repeatedly asked if anyone would care or if anyone objects. Nobody has
objected. It has probably not even been working for a good while since
nobody has tested/used this code recently.
The stuff in krb4.h that was generic enough to be used by other sources
is now present in security.h
Make sure we always return CURLM_CALL_MULTI_PERFORM when we reach
CURLM_STATE_DONE since the state is transient and it can very well
continue executing as there is nothing to wait for.
Bug: http://curl.haxx.se/mail/lib-2013-08/0211.html
Reported-by: Yi Huang
... this also makes sure that the progess callback gets called more
often during TFTP transfers.
Added test 1238 to verify.
Bug: http://curl.haxx.se/bug/view.cgi?id=1269
Reported-by: Jo3
I build curl.exe (using MingW) with '-DCURLDEBUG' and by importing from
libcurl.dll. Which means the new curl_easy_perform_ev() must be
exported from libcurl.dll.
Doing curl_multi_add_handle() on an easy handle that is already added to
a multi handle now returns this error code. It previously returned
CURLM_BAD_EASY_HANDLE for this condition.
The closure_handle is "owned" by the multi handle and it is
unconditional so the setting up of it should be in the Curl_multi_handle
function rather than curl_multi_add_handle.
This function is meant to work *exactly* as curl_easy_perform() but will
use the event-based libcurl API internally instead of
curl_multi_perform(). To avoid relying on an actual event-based library
and to not use non-portable functions (like epoll or similar), there's a
rather inefficient emulation layer implemented on top of Curl_poll()
instead.
There's currently some convenience logging done in curl_easy_perform_ev
which helps when tracking down problems. They may be suitable to remove
or change once things seem to be fine enough.
curl has a new --test-event option when built with debug enabled that
then uses curl_easy_perform_ev() instead of curl_easy_perform(). If
built without debug, using --test-event will only output a warning
message.
NOTE: curl_easy_perform_ev() is not part if the public API on purpose.
It is only present in debug builds of libcurl and MUST NOT be considered
stable even then. Use it for libcurl-testing purposes only.
runtests.pl now features an -e command line option that makes it use
--test-event for all curl command line tests. The man page is updated.
libcurl quietly truncates usernames, passwords, and options from
before an '@' sign in a URL to 255 (= MAX_CURL_PASSWORD_LENGTH - 1)
characters to fit in fixed-size buffers on the stack. Allocate a
buffer large enough to fit the parsed fields on the fly instead to
support longer passwords.
After this change, there are no more uses of MAX_CURL_OPTIONS_LENGTH
left, so stop defining that constant while at it. The hardcoded max
username and password length constants, on the other hand, are still
used in HTTP proxy credential handling (which this patch doesn't
touch).
Reported-by: Colby Ranger
Instead of nesting "if(success)" blocks and leaving the reader in
suspense about what happens in the !success case, deal with failure
cases early, usually with a simple goto to clean up and return from
the function.
No functional change intended. The main effect is to decrease the
indentation of this function slightly.
libcurl truncates usernames, passwords, and options set with
curl_easy_setopt to 255 (= MAX_CURL_PASSWORD_LENGTH - 1) characters.
This doesn't affect the return value from curl_easy_setopt(), so from
the caller's point of view, there is no sign anything strange has
happened, except that authentication fails.
For example:
# Prepare a long (300-char) password.
s=0123456789; s=$s$s$s$s$s$s$s$s$s$s; s=$s$s$s;
# Start a server.
nc -l -p 8888 | tee out & pid=$!
# Tell curl to pass the password to the server.
curl --user me:$s http://localhost:8888 & sleep 1; kill $pid
# Extract the password.
userpass=$(
awk '/Authorization: Basic/ {print $3}' <out |
tr -d '\r' |
base64 -d
)
password=${userpass#me:}
echo ${#password}
Expected result: 300
Actual result: 255
The fix is simple: allocate appropriately sized buffers on the heap
instead of trying to squeeze the provided values into fixed-size
on-stack buffers.
Bug: http://bugs.debian.org/719856
Reported-by: Colby Ranger
libcurl truncates usernames and passwords it reads from .netrc to
LOGINSIZE and PASSWORDSIZE (64) characters without any indication to
the user, to ensure the values returned from Curl_parsenetrc fit in a
caller-provided buffer.
Fix the interface by passing back dynamically allocated buffers
allocated to fit the user's input. The parser still relies on a
256-character buffer to read each line, though.
So now you can include an ~246-character password in your .netrc,
instead of the previous limit of 63 characters.
Reported-by: Colby Ranger
Instead of remembering before each "return" statement which temporary
allocations, if any, need to be freed, take care to set pointers to
NULL when no longer needed and use a goto to a common block to exit
the function and free all temporaries.
No functional change intended. Currently the only temporary buffer in
this function is "proxy" which is already correctly freed when
appropriate, but there will be more soon.
Use appropriately sized buffers on the heap instead of fixed-size
buffers on the stack, to allow for longer usernames and passwords.
Callers never pass anything longer than MAX_CURL_USER_LENGTH (resp.
MAX_CURL_PASSWORD_LENGTH), so no functional change inteded yet.
This makes the socket callback get called with the proper bitmask as
otherwise the application could be left hanging waiting for reading on
an upload connection!
Bug: http://curl.haxx.se/mail/lib-2013-08/0043.html
Reported-by: Bill Doyle
With everything being struct SessionHandle pointers now, this rename
makes multi.c use the library-wide practise of calling that pointer
'data' instead of the previously used 'easy'.
Moved Curl_easy_addmulti() from easy.c to multi.c, renamed it to
easy_addmulti and made it static.
Removed Curl_easy_initHandleData() and uses of it since it was emptied
in commit cdda92ab67b47d74a.
All protocol handler structs are now opaque (void *) in the
SessionHandle struct and moved in the request-specific sub-struct
'SingleRequest'. The intension is to keep the protocol specific
knowledge in their own dedicated source files [protocol].c etc.
There's some "leakage" where this policy is violated, to be addressed at
a later point in time.
1 - always allocate the struct in protocol->setup_connection. Some
protocol handlers had to get this function added.
2 - always free at the end of a request. This is also an attempt to keep
less memory in the handle after it is completed.
CURLOPT_DNS_USE_GLOBAL_CACHE broke in commit c43127414d (been
broken since the libcurl 7.29.0 release). While this option has been
documented as deprecated for almost a decade and nobody even reported
this bug, it should remain functional.
Added test case 1512 to verify
The previous naming scheme ftp_state_post_XXXX() wasn't really helpful
as it wasn't always immediately after 'xxxx' and it wasn't easy to
understand what it does based on such a name.
This new one is instead ftp_state_yyyy() where yyyy describes what it
does or sends.
This is a regression as this logic used to work. It isn't clear when it
broke, but I'm assuming in 7.28.0 when we went all-multi internally.
This likely never worked with the multi interface. As the failed
connection is detected once the multi state has reached DO_MORE, the
Curl_do_more() function was now expanded somewhat so that the
ftp_do_more() function can request to go "back" to the previous state
when it makes another attempt - using PASV.
Added test case 1233 to verify this fix. It has the little issue that it
assumes no service is listening/accepting connections on port 1...
Reported-by: byte_bucket in the #curl IRC channel
For some reason, OS X 10.5's GCC suddenly stopped working correctly with
macros that change MD5_Init etc. in the code to CC_MD5_Init etc., so I
worked around this by removing use of the macros and inserting static
functions that just call CommonCrypto's implementations of the functions
instead.
This changes the previous check for untrusted certs to a check for
certs explicitely marked as trusted.
The change is backward-compatible (tested with certdata.txt v1.80).
The internal function that's used to detect known file extensions for
the default Content-Type got the the wrong pointer passed in when
CURLFORM_BUFFER + CURLFORM_BUFFERPTR were used. This had the effect that
strlen() would be used which could lead to an out-of-bounds read (and
thus segfault). In most cases it would only lead to it not finding or
using the correct default content-type.
It also showed that test 554 and test 587 were testing for the
previous/wrong behavior and now they're updated as well.
Bug: http://curl.haxx.se/bug/view.cgi?id=1262
Reported-by: Konstantin Isakov
Christian Heimes brought to our attention that the certdata.txt
format has recently changed [1], causing ca-bundle.crt created
with mk-ca-bundle.[pl|vbs] to include untrusted certs.
[1] http://lists.debian.org/debian-release/2012/11/msg00411.html
The motivation for having a separate struct that keep track of an easy
handle when using the multi handle was removed when we switched to
always using the multi interface internally. Now they were just two
separate struct that was always allocated for each easy handle.
This first step just moves the Curl_one_easy struct members into the
SessionHandle struct and hides this somehow (== keeps the source code
changes to a minimum) by defining Curl_one_easy to SessionHandle
The biggest changes in this commit are:
1 - the linked list of easy handles had to be changed somewhat due
to the new struct layout. This made the main linked list pointer
get renamed to 'easyp' and there's also a new pointer to the last
node, called easylp. It is no longer circular but ends with ->next
pointing to NULL. New nodes are still added last.
2 - easy->state is now called easy->mstate to avoid name collision
(This doesn't need to appear in the release notes.) I noticed a few places
where infof() was called, and there should've been an LF at the end of the
string, but there wasn't.
It turns out Snow Leopard not only has SecItemCopyMatching() defined in
a header not included by the omnibus header, but it won't work for our
purposes, because searching for SecIdentityRef objects wasn't added
to that API until Lion. So we now use the old SecKeychainSearch API
instead if the user is building under, or running under, Snow Leopard.
Bug: http://sourceforge.net/p/curl/bugs/1255/
Reported by: Edward Rudd
Previously we used __MAC_10_X and __IPHONE_X to mark digest-generating
code that was specific to OS X and iOS. Now we use
__MAC_OS_X_VERSION_MAX_ALLOWED and __IPHONE_OS_VERSION_MAX_ALLOWED
instead of those macros.
Bug: http://sourceforge.net/p/curl/bugs/1255/
Reported by: Edward Rudd
For the standard VMS text file formats, VMS needs to read the file to
get the actual file size.
For the standard VMS binary file formats, VMS needs a special format of
fopen() call so that it stops reading at the logical end of file instead
of at the end of the blocks allocated to the file.
I structured the patch this way as I was not sure about changing the
structures or parameters to the routines, but would prefer to only call
the stat() function once and pass the information to where the fopen()
call is made.
Bug: https://sourceforge.net/p/curl/bugs/758/
The code for CURLFORM_FILECONTENT had its check for duplicate options
wrong so that it would reject CURLFORM_PTRNAME if used in combination
with it (but not CURLFORM_COPYNAME)! The flags field used for this
purpose cannot be interpreted that broadly.
Bug: http://curl.haxx.se/mail/lib-2013-07/0258.html
Reported-by: Byrial Jensen
Linking on Solaris 10 x86 with Sun Studio 12 failed when we upgraded
automake for the release builds.
Bug: http://curl.haxx.se/bug/view.cgi?id=1217
Reported-by: Dagobert Michelsen
Commit 6d30f8ebed didn't work properly. First, it used the wrong
array index, but this fix also:
1 - only does the copying if indeed there was any activity
2 - makes sure to properly translate between internal and external
bitfields, which are not guaranteed to match
Reported-by: Evgeny Turnaev
Instead of going 50,100,150 etc millisecond delay time when nothing has
been found to do or wait for, we now start lower and double each loop as
in 4,8,16,32 etc.
This lowers the minimum wait without sacrifizing the longer wait too
much with unnecessary CPU cycles burnt.
Bug: http://curl.haxx.se/mail/lib-2013-07/0103.html
Reported-by: Andreas Malzahn
In the case of an active connection when ftp_do_more() detects that the
server has connected back, it must make sure to mark it as complete so
that the multi_runsingle() function will detect this and move on to the
next state.
Bug: http://curl.haxx.se/mail/lib-2013-07/0115.html
Reported-by: Clemens Gruber
CURLOPT_XFERINFOFUNCTION is now the preferred progress callback function
and CURLOPT_PROGRESSFUNCTION is considered deprecated.
This new callback uses pure 'curl_off_t' arguments to pass on full
resolution sizes. It otherwise retains the same characteristics: the
same call rate, the same meanings for the arguments and the return code
is used the same way.
The progressfunc.c example is updated to show how to use the new
callback for newer libcurls while supporting the older one if built with
an older libcurl or even built with a newer libcurl while running with
an older.
This reverts commit 7ed25cc, reinstating commit 8ec2cb5.
As of 18-jul-2013 we still do have code in libcurl that makes use of these
memory functions. Commit 8ec2cb5 comment still applies and is yet valid.
These memory functions are solely used in Windows builds, so all related
code is protected with '#ifdef WIN32' preprocessor conditional compilation
directives.
Specifically, wcsdup() _wcsdup() are used when building a Windows target with
UNICODE and USE_WINDOWS_SSPI preprocessor symbols defined. This is the case
when building a Windows UNICODE target with Windows native SSL/TLS support
enabled.
Realizing that wcsdup() _wcsdup() are used is a bit tricky given that usage
of these is hidden behind _tcsdup() which is MS way of dealing with code
that must tolerate UNICODE and non-UNICODE compilation. Additionally, MS
header files and those compatible from other compilers use this preprocessor
conditional compilation directive in order to select at compilation time
whether 'wide' or 'ansi' MS API functions are used.
Without this code, Windows build targets with Windows native SSL/TLS support
enabled and MemoryTracking support enabled misbehave in tracking memory usage,
regardless of being a UNICODE enabled build or not.
Fixed issue with static build for MSVC2010.
After some investigation I've discovered known issue
http://public.kitware.com/Bug/view.php?id=11240 When .rc file is linked
to static lib it fails with following linker error
LINK : warning LNK4068: /MACHINE not specified; defaulting to X86
file.obj : fatal error LNK1112: module machine type 'x64' conflicts with
target machine type 'X86'
Fix add target property /MACHINE: for MSVC generation.
Also removed old workarounds - it caused errors during msvc build.
Bug: http://curl.haxx.se/mail/lib-2013-07/0046.html
I just noticed that OS X no longer supports SSLv2. Other TLS engines return
an error if the requested protocol isn't supported by the underlying
engine, so we do that now for SSLv2 if the framework returns an error
when trying to turn on SSLv2 support. (Note: As always, SSLv2 support is
only enabled in curl when starting the app with the -2 argument; it's off
by default. SSLv2 is really old and insecure.)
When doing multi-part formposts, libcurl used a pseudo-random value that
was seeded with time(). This turns out to be bad for users who formpost
data that is provided with users who then can guess how the boundary
string will look like and then they can forge a different formpost part
and trick the receiver.
My advice to such implementors is (still even after this change) to not
rely on the boundary strings being cryptographically strong. Fix your
code and logic to not depend on them that much!
I moved the Curl_rand() function into the sslgen.c source file now to be
able to take advantage of the SSL library's random function if it
provides one. If not, try to use the RANDOM_FILE for seeding and as a
last resort keep the old logic, just modified to also add microseconds
which makes it harder to properly guess the exact seed.
The formboundary() function in formdata.c is now using 64 bit entropy
for the boundary and therefore the string of dashes was reduced by 4
letters and there are 16 hex digits following it. The total length is
thus still the same.
Bug: http://curl.haxx.se/bug/view.cgi?id=1251
Reported-by: "Floris"
When using %x, the number must be treated as unsigned as otherwise it
would get sign-extended on for example 64bit machines and do wrong
output. This problem showed when doing printf("%08x", 0xffeeddcc) on a
64bit host.
Follow-up fix from 7d80ed64e4.
The SessionHandle may not be around to use when we restore the sigpipe
sighandler so we store the no_signal boolean in the local struct to know
if/how to restore.
When the c-ares based resolver backend failed to resolve a name, it
tried to show the name that failed from existing structs. This caused
the wrong output and shown hostname when for example --interface
[hostname] was used and that name resolving failed.
Now we use the hostname used in the actual resolve attempt in the error
message as well.
Bug: http://curl.haxx.se/bug/view.cgi?id=1191
Reported-by: Kim Vandry
When we recently started to treat a zero return code from SSL_read() as
an error we also got false positives - which primarily looks to be
because the OpenSSL documentation is wrong and a zero return code is not
at all an error case in many situations.
Now ossl_recv() will check with ERR_get_error() to see if there is a
stored error and only then consider it to be a true error if SSL_read()
returned zero.
Bug: http://curl.haxx.se/bug/view.cgi?id=1249
Reported-by: Nach M. S.
Patch-by: Nach M. S.
Something (a recent security update maybe?) changed in Lion, and now it
has changed SSLCopyPeerTrust such that it may return noErr but also give
us a null trust, which caught us off guard and caused an eventual crash.
... and restore the ordinary handling again when it returns. This is
done for curl_easy_perform() and curl_easy_cleanup() only for now - and
only when built to use OpenSSL as backend as this is the known culprit
for the spurious SIGPIPEs people have received.
Bug: http://curl.haxx.se/bug/view.cgi?id=1180
Reported by: Lluís Batlle i Rossell
This doesn't need to be in the release notes. I cleaned up a lot of the #if
lines in the code to use MAC_OS_X_VERSION_MIN_REQUIRED and
MAC_OS_X_VERSION_MAX_ALLOWED instead of checking for whether things like
__MAC_10_6 or whatever were defined, because for some SDKs Apple has released
they were defined out of place.
RFC3986 details how a path part passed in as part of a URI should be
"cleaned" from dot sequences before getting used. The described
algorithm is now implemented in lib/dotdot.c with the accompanied test
case in test 1395.
Bug: http://curl.haxx.se/bug/view.cgi?id=1200
Reported-by: Alex Vinnik
Security problem: CVE-2013-2174
If a program would give a string like "%FF" to curl_easy_unescape() but
ask for it to decode only the first byte, it would still parse and
decode the full hex sequence. The function then not only read beyond the
allowed buffer but it would also deduct the *unsigned* counter variable
for how many more bytes there's left to read in the buffer by two,
making the counter wrap. Continuing this, the function would go on
reading beyond the buffer and soon writing beyond the allocated target
buffer...
Bug: http://curl.haxx.se/docs/adv_20130622.html
Reported-by: Timo Sirainen
As a remedy to the problem when a socket gets closed and a new one is
opened with the same file descriptor number and as a result
multi.c:singlesocket() doesn't detect the difference, the new function
Curl_multi_closed() gets told when a socket is closed so that it can be
removed from the socket hash. When the old one has been removed, a new
socket should be detected fine by the singlesocket() on next invoke.
Bug: http://curl.haxx.se/bug/view.cgi?id=1248
Reported-by: Erik Johansson
When performing COOKIELIST operations the cookie lock needs to be taken
for the cases where the cookies are shared among multiple handles!
Verified by Benjamin Gilbert's updated test 506
Bug: http://curl.haxx.se/bug/view.cgi?id=1215
Reported-by: Benjamin Gilbert
When curl_multi_wait() finds no file descriptor to wait for, it returns
instantly and this must be handled gracefully within curl_easy_perform()
or cause a busy-loop. Starting now, repeated fast returns without any
file descriptors is detected and a gradually increasing sleep will be
used (up to a max of 1000 milliseconds) before continuing the loop.
Bug: http://curl.haxx.se/bug/view.cgi?id=1238
Reported-by: Miguel Angel
The initial fix to only compare full path names were done in commit
04f52e9b4d but found out to be incomplete. This takes should make the
change more complete and there's now two additional tests to verify
(test 31 and 62).
By always returning the md5 for an empty body when auth-int is asked
for, libcurl now at least sometimes does the right thing.
Bug: http://curl.haxx.se/bug/view.cgi?id=1235
Patched-by: Nach M. S.
Allow less room for "triggered too early" mistakes by applications /
timers on non-windows platforms. Starting now, we assume that a timeout
call is never made earlier than 3 milliseconds before the actual
timeout. This greatly improves timeout accuracy on Linux.
Bug: http://curl.haxx.se/bug/view.cgi?id=1228
Reported-by: Hang Su
In the pkcs12 code, we get a list of x509 records returned from
PKCS12_parse but when iterating over the list and passing each to
SSL_CTX_add_extra_chain_cert() we didn't also properly remove them from
the "stack", which made them get freed twice (both in sk_X509_pop_free()
and then later in SSL_CTX_free).
This isn't really documented anywhere...
Bug: http://curl.haxx.se/bug/view.cgi?id=1236
Reported-by: Nikaiw
commit 29bf0598aa introduced a problem when the "internal" timeout is
prefered to the given if shorter, as it didn't consider the case where
-1 was returned. Now the internal timeout is only considered if not -1.
Reported-by: Tor Arntsen
Bug: http://curl.haxx.se/mail/lib-2013-06/0015.html
If the multi handle's pending timeout is less than what is passed into
this function, it will now opt to use the shorter time anyway since it
is a very good hint that the handle wants to process something in a
shorter time than what otherwise would happen.
curl_multi_wait.3 was updated accordingly to clarify
This is the reason for bug #1224
Bug: http://curl.haxx.se/bug/view.cgi?id=1224
Reported-by: Andrii Moiseiev
When sending the HTTP Authorization: header for digest, the user name
needs to be escaped if it contains a double-quote or backslash.
Test 1229 was added to verify
Reported and fixed by: Nach M. S
Bug: http://curl.haxx.se/bug/view.cgi?id=1230
We found that in specific cases if the connection is abruptly closed,
the underlying socket is listed in a close_wait state. We continue to
call the curl_multi_perform, curl_mutli_fdset etc. None of these APIs
report the socket closed / connection finished. Since we have cases
where the multi connection is only used once, this can pose a problem
for us. I've read that if another connection was to come in, curl would
see the socket as bad and attempt to close it at that time -
unfortunately, this does not work for us.
I found that in specific situations, if SSL_write returns 0, curl did
not recognize the socket as closed (or errored out) and did not report
it to the application. I believe we need to change the code slightly, to
check if ssl_write returns 0. If so, treat it as an error - the same as
a negative return code.
For OpenSSL - the ssl_write documentation is here:
http://www.openssl.org/docs/ssl/SSL_write.html
1 - don't skip host names with a colon in them in an attempt to bail out
on HTTP headers in the cookie file parser. It was only a shortcut anyway
and trying to parse a file with HTTP headers will still be handled, only
slightly slower.
2 - don't skip domain names based on number of dots. The original
netscape cookie spec had this oddity mentioned and while our code
decreased the check to only check for two, the existing cookie spec has
no such dot counting required.
Bug: http://curl.haxx.se/bug/view.cgi?id=1221
Reported-by: Stefan Neis
I found a bug which cURL sends cookies to the path not to aim at.
For example:
- cURL sends a request to http://example.fake/hoge/
- server returns cookie which with path=/hoge;
the point is there is NOT the '/' end of path string.
- cURL sends a request to http://example.fake/hogege/ with the cookie.
The reason for this old "feature" is because that behavior is what is
described in the original netscape cookie spec:
http://curl.haxx.se/rfc/cookie_spec.html
The current cookie spec (RFC6265) clarifies the situation:
http://tools.ietf.org/html/rfc6265#section-5.2.4
This reverts commit 8ec2cb5544.
We don't have any code anywhere in libcurl (or the curl tool) that use
wcsdup so there's no such memory use to track. It seems to cause mild
problems with the Borland compiler though that we may avoid by reverting
this change again.
Bug: http://curl.haxx.se/mail/lib-2013-05/0070.html
If the mail sent during the transfer contains a terminating <CRLF> then
we should not send the first <CRLF> of the EOB as specified in RFC-5321.
Additionally don't send the <CRLF> if there is "no mail data" as the
DATA command already includes it.
The code within #ifdef HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID wrongly had two
closing braces when it should only have one, so builds without that
define would fail.
Bug: http://curl.haxx.se/mail/lib-2013-05/0000.html
The curl command line utility would display the the completed progress
bar with a percentage of zero as the progress routines didn't know the
size of the transfer.
Removed the hard returns from imap and pop3 by using the same style for
sending the authentication string as smtp. Moved the "Other mechanisms
not supported" check in smtp to match that of imap and pop3 to provide
consistency between the three email protocols.
Users using the Secure Transport (darwinssl) back-end can now use a
certificate and private key to authenticate with a site using TLS. Because
Apple's security system is based around the keychain and does not have any
non-public function to create a SecIdentityRef data structure from data
loaded outside of the Keychain, the certificate and private key have to be
loaded into the Keychain first (using the certtool command line tool or
the Security framework's C API) before we can find it and use it.
In addition to checking for the SASL-IR capability the user can override
the sending of the client's initial response in the AUTHENTICATION
command with the use of CURLOPT_SASL_IR should the server erroneously
not report SASL-IR when it does support it.
Updated the default behaviour of sending the client's initial response in the AUTH
command to not send it and added support for CURLOPT_SASL_IR to allow the user to
specify including the response.
Related Bug: http://curl.haxx.se/mail/lib-2012-03/0114.html
Reported-by: Gokhan Sengun
By introducing an internal alternative to curl_multi_init() that accepts
parameters to set the hash sizes, easy handles will now use tiny socket
and connection hash tables since it will only ever add a single easy
handle to that multi handle.
This decreased the number mallocs in test 40 (which is a rather simple
and typical easy interface use case) from 1142 to 138. The maximum
amount of memory allocated used went down from 118969 to 78805.
When connecting back to an FTP server after having sent PASV/EPSV,
libcurl sometimes didn't use the proxy properly even though the proxy
was used for the initial connect.
The function wrongly checked for the CURLOPT_PROXY variable to be set,
which made it act wrongly if the proxy information was set with an
environment variable.
Added test case 711 to verify (based on 707 which uses --socks5). Also
added test712 to verify another variation of setting the proxy: with
--proxy socks5://
Bug: http://curl.haxx.se/bug/view.cgi?id=1218
Reported-by: Zekun Ni
... in order to prevent an artificial timeout event based on stale
speed-check data from a previous network transfer. This commit fixes
a regression caused by 9dd85bced5.
Bug: https://bugzilla.redhat.com/906031
Fixed an issue in parse_proxy(), introduced in commit 11332577b3,
where an empty username or password (For example: http://:@example.com)
would cause a crash.
There is no need to perform separate clearing of data if a NULL option
pointer is passed in. Instead this operation can be performed by simply
not calling parse_login_details() and letting the rest of the code do
the work.
setstropt_userpwd() was calling setstropt() in commit fddb7b44a7 to
set each of the login details which would duplicate the strings and
subsequently cause a memory leak.
In addition to parsing the optional login options from the URL, added
support for parsing them from CURLOPT_USERPWD, to allow the following
supported command line:
--user username:password;options
Added bounds checking when searching for the separator characters within
the login string as this string may not be NULL terminated (For example
it is the login part of a URL). We do this in preference to allocating a
new string to copy the login details into which could then be passed to
parse_login_details() for performance reasons.
As well as parsing the username and password from the URL, added support
for parsing the optional options part from the login details, to allow
the following supported URL format:
schema://username:password;options@example.com/path?q=foobar
This will only be used by IMAP, POP3 and SMTP at present but any
protocol that may be given login options in the URL will be able to
add support for them.
...instead of the 220 we otherwise expect.
Made the ftpserver.pl support sending a custom "welcome" and then
created test 1219 to verify this fix with such a 230 welcome.
Bug: http://curl.haxx.se/mail/lib-2013-02/0102.html
Reported by: Anders Havn
Accessing a file with an absolute path in the root dir but with no
directory specified was not handled correctly. This fix comes with four
new test cases that verify it.
Bug: http://curl.haxx.se/mail/lib-2013-04/0142.html
Reported by: Sam Deane
Cookies set for 'example.com' could accidentaly also be sent by libcurl
to the 'bexample.com' (ie with a prefix to the first domain name).
This is a security vulnerabilty, CVE-2013-1944.
Bug: http://curl.haxx.se/docs/adv_20130412.html
The previously applied patch didnt work on Windows; we cant rely
on shell commands like 'echo' since they act diffently on each
platform and each shell.
In order to keep this script platform-independent the code must
only use pure Perl.
When doing PWD, there's a 257 response which apparently some servers
prefix with a comment before the path instead of after it as is
otherwise the norm.
Failing to parse this, several otherwise legitimate use cases break.
Bug: http://curl.haxx.se/mail/lib-2013-04/0113.html
The OpenSSL pipe wrote to the final CA bundle file, but the encoded PEM
output wrote to a temporary file. Consequently, the OpenSSL output was
lost when the temp file was renamed to the final file at script finish
(overwriting the final file written earlier by openssl).
Patch posted to the list by Richard Michael (rmichael edgeofthenet org).
I noticed that aria2's SecureTransport code disables insecure ciphers such
as NULL, anonymous, IDEA, and weak-key ciphers used by SSLv3 and later.
That's a good idea, and now we do the same thing in order to prevent curl
from accessing a "secure" site that only negotiates insecure ciphersuites.
Previously it only compared credentials if the requested needle
connection wasn't using a proxy. This caused NTLM authentication
failures when using proxies as the authentication code wasn't send on
the connection where the challenge arrived.
Added test 1215 to verify: NTLM server authentication through a proxy
(This is a modified copy of test 67)
Since qsort implementations vary with regards to handling the order
of similiar elements, this change makes the internal sort function
more deterministic by comparing path length first, then domain length
and finally the cookie name. Spotted with testcase 62 on Windows.
When doing PORT and upload (STOR), this function needs to extract the
file descriptor for both connections so that it will respond immediately
when the server eventually connects back.
This flaw caused active connections to become unnecessary slow but they
would still often work due to the normal polling on a timeout. The bug
also would not occur if the server connected back very fast, like when
testing on local networks.
Bug: http://curl.haxx.se/bug/view.cgi?id=1183
Reported by: Daniel Theron
I am using curl_easy_setopt(CURLOPT_INTERFACE, "if!something") to force
transfers to use a particular interface but the transfer fails with
CURLE_INTERFACE_FAILED, "Failed binding local connection end" if the
interface I specify has no IPv6 address. The cause is as follows:
The remote hostname resolves successfully and has an IPv6 address and an
IPv4 address.
cURL attempts to connect to the IPv6 address first.
bindlocal (in lib/connect.c) fails because Curl_if2ip cannot find an
IPv6 address on the interface.
This is a fatal error in singleipconnect()
This change will make cURL try the next IP address in the list.
Also included are two changes related to IPv6 address scope:
- Filter the choice of address in Curl_if2ip to only consider addresses
with the same scope ID as the connection address (mismatched scope for
local and remote address does not result in a working connection).
- bindlocal was ignoring the scope ID of addresses returned by
Curl_if2ip . Now it uses them.
Bug: http://curl.haxx.se/bug/view.cgi?id=1189
At some point recently we lost the default value for the easy handle's
connection cache, and this change puts it back to 5 - which is the
former default value and it is documented in the curl_easy_setopt.3 man
page.
The Microsoft knowledge-base article
http://support.microsoft.com/kb/823764 describes how to use SNDBUF to
overcome a performance shortcoming in winsock, but it doesn't apply to
Windows Vista and later versions. If the described SNDBUF magic is
applied when running on those more recent Windows versions, it seems to
instead have the reversed effect in many cases and thus make libcurl
perform less good on those systems.
This fix thus adds a run-time version-check that does the SNDBUF magic
conditionally depending if it is deemed necessary or not.
Bug: http://curl.haxx.se/bug/view.cgi?id=1188
Reported by: Andrew Kurushin
Tested by: Christian Hägele
The last remaining code piece that still used FTPSENDF now uses PPSENDF.
In the problematic case, a PREQUOTE series was done on a re-used
connection when Curl_pp_init() hadn't been called so it had messed up
pointers. The init call is done properly from Curl_pp_sendf() so this
change fixes this particular crash.
Bug: http://curl.haxx.se/mail/lib-2013-03/0319.html
Reported by: Sam Deane
As of 25-mar-2013 wcsdup() _wcsdup() and _tcsdup() are only used in
WIN32 specific code, so tracking of these has not been extended for
other build targets. Without this fix, memory tracking system on
WIN32 builds, when using these functions, would provide misleading
results.
In order to properly extend this support for all targets curl.h
would have to define curl_wcsdup_callback prototype and consequently
wchar_t should be visible before that in curl.h. IOW curl_wchar_t
defined in curlbuild.h and this pulling whatever system header is
required to get wchar_t definition.
Additionally a new curl_global_init_mem() function that also receives
user defined wcsdup() callback would be required.
Proxy servers tend to add their own headers at the beginning of
responses. The size of these headers was not taken into account by
CURLINFO_HEADER_SIZE before this change.
Bug: http://curl.haxx.se/bug/view.cgi?id=1204
After having done a POST over a CONNECT request, the 'rewindaftersend'
boolean could be holding the previous value which could lead to badness.
This should be tested for in a new test case!
Bug: https://groups.google.com/d/msg/msysgit/B31LNftR4BI/KhRTz0iuGmUJ
Fixed incorrect initial response generation for the NTLM and LOGIN SASL
authentication mechanisms when the SASL-IR was detected.
Introduced in commit: 6da7dc026c.
curl has been accepting URLs using slightly wrong syntax for a long
time, such as when completely missing as slash "http://example.org" or
missing a slash when a query part is given
"http://example.org?q=foobar".
curl would translate these into a legitimate HTTP request to servers,
although as was shown in bug #1206 it was not adjusted properly in the
cases where a HTTP proxy was used.
Test 1213 and 1214 were added to the test suite to verify this fix.
The test HTTP server was adjusted to allow us to specify test number in
the host name only without using any slashes in a given URL.
Bug: http://curl.haxx.se/bug/view.cgi?id=1206
Reported by: ScottJi
Introducing a number of options to the multi interface that
allows for multiple pipelines to the same host, in order to
optimize the balance between the penalty for opening new
connections and the potential pipelining latency.
Two new options for limiting the number of connections:
CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections
to the same host. When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished, so we can reuse the connection.
CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total.
When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished. The free connection will then be reused, if possible, or
closed if the pending handle can't reuse it.
Several new options for pipelining:
CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a
pipeline is "full" when a connection is to be reused, a new connection
will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it.
If not, the handle will be put in a pending state until a connection is
ready (either free or a pipe got shorter).
CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a transfer with a content
length that is larger than this.
CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a chunk larger than this.
CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow
pipelining.
CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow
pipelining.
See the curl_multi_setopt() man page for details.
Following commit e450f66a02 and the changes in the multi interface
being used internally, from 7.29.0, the transfer cancellation in
pop3_dophase_done() is no longer required.
When Curl_do() returns failure, the connection pointer could be NULL so
the code path following needs to that that into account.
Bug: http://curl.haxx.se/mail/lib-2013-03/0062.html
Reported by: Eric Hu
Moved the blocking state machine to the disconnect functions so that the
logout / quit functions are only responsible for sending the actual
command needed to logout or quit.
Additionally removed the hard return on failure.
Added an exception, for the STORE command, to the untagged response
processor in imap_endofresp() as servers will back respones containing
the FETCH keyword instead.
The list of unsafe functions currently consists of sprintf, vsprintf,
strcat, strncat and gets.
Subsequently, some existing code needed updating to avoid warnings on
this.
As the UID has to be specified by the user for the FETCH command to work
correctly, added a check to imap_fetch(), although strictly speaking it
is protected by the call from imap_perform().
The option needs to be set on the SSL socket. Setting it on the model
takes no effect. Note that the non-blocking mode is still not enabled
for the handshake because the code is not yet ready for that.
Commit 26eaa83830 introduces the use of S_ISDIR() yet some compilers,
such as MSVC don't support it, so we must define a substitute using
file flags and mask.
Commit f4cc54cb47 (shipped as part of the 7.29.0 release) was a
bug fix that introduced a regression in that while trying to avoid
allowing directory names, it also forbade "special" files like character
devices and more. like "/dev/null" as was used by Oliver who reported
this regression.
Reported by: Oliver Gondža
Bug: http://curl.haxx.se/mail/archive-2013-02/0040.html
If the server hung up the connection without sending a closure alert,
then we'd keep probing the socket for data even though it's dead. Now
we're ready for this situation.
Bug: http://curl.haxx.se/mail/lib-2013-03/0014.html
Reported by: Aki Koskinen
Some state changes would be performed after a failure test that
performed a hard return, whilst others would be performed within a test
for success. Updated the code, for consistency, so all instances are
performed within a success test.
Some state changes would be performed after a failure test that
performed a hard return, whilst others would be performed within a test
for success. Updated the code, for consistency, so all instances are
performed within a success test.
Added imap_custom(), which initiates the custom command processing,
and an associated response handler imap_state_custom_resp(), which
handles any responses by sending them to the client as body data.
All untagged responses with the same name as the first word of the
custom request string are accepted, with the exception of SELECT and
EXAMINE which have responses that cannot be easily identified. An
extra check has been provided for them so that any untagged responses
are accepted for them.
Added imap_parse_custom_request() for parsing the CURLOPT_CUSTOMREQUEST
parameter which URL decodes the value and separates the request from
any parameters - This makes it easier to filter untagged responses
by the request command.
For consistency changed the logic of the imap_state_append_resp()
function to test for an unsucessful continuation response rather than a
succesful one.
The APPEND operation needs to be performed in several steps:
1) We send "<tag> APPEND <mailbox> <flags> {<size>}\r\n"
2) Server responds with continuation respose "+ ...\r\n"
3) We start the transfer and send <size> bytes of data
4) Only now we end the request command line by sending "\r\n"
5) Server responds with "<tag> OK ...\r\n"
This commit performs steps 4 and 5, in the DONE phase, as more
processing is required after the transfer.
Some state changes would be performed after a failure test that
performed a hard return, whilst others would be performed within a test
for success. Updated the code, for consistency, so all instances are
performed within a success test.
Not processing the final FETCH responses was not optimal, not only
because the response code would be ignored but it would also leave data
unread on the socket which would prohibit connection reuse.
A typical FETCH response can be broken down into four parts:
1) "* <uid> FETCH (<what> {<size>}\r\n", using continuation syntax
2) <size> bytes of the actual message
3) ")\r\n", finishing the untagged response
4) "<tag> OK ...", finishing the command
Part 1 is read in imap_fetch_resp(), part 2 is consumed in the PERFORM
phase by the transfer subsystem, parts 3 and 4 are currently ignored.
