Many alpm_option_get/set_*() functions already check this
and set pm_errno to the right value, but not all, so
this improves consistency.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This greatly simplifies the cleanup fallthrough in our download function
and we'll be able to reuse this for signatures.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Based on the fact that localf always points to the same file, there's no
need to code in multiple fopen calls with varying results. Instead,
track the desired file open mode and make a single call to fopen.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Create a more general function that allows appending a suffix to a
filepath.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This lets us determine the real size of the file on disk so that we can
properly bump the progress bar when we're resuming a download.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses FS#23424. The -dd backend code was introduced in commit
b6ec9019d7, and unfortunately the munged depend used for comparison did
not carry through to the eventual display of this version. To fix this,
we undo some of the depcmp_tolerant() business introduced, and instead
make a new pmdepend_t object if necessary when the no dependency version
flag is set. This results in the correct depend being copied to the
missing depend passed onto the frontend.
Signed-off-by: Dan McGee <dan@archlinux.org>
pacman 3.5.0 removed alpm_db_register_local, so calling
alpm_db_unregister_all leaves the front end in a position where there's
no local db, and no way to re-register it.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
After updating a database, remove the old signature to prevent it
being used in validation if the new signature fails to download.
Signed-off-by: Allan McRae <allan@archlinux.org>
If signature verification is needed, attempt to download a signature
file for a repo when it is updated. Return an error if unable to
download signature only when checking is mandatory, or if signature is
invalid.
TODO: At the moment the database signature is only checked on download.
Should we do anything with a database if it fails to be verified to prevent
its future usage?
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a pmpgpsig_t struct to the database entry struct and functions for
the lazy loading of database signatures. Add a function for checking
database signatures, reusing (and generalizing) the code currently used
for checking package signatures.
TODO: The code for reading in signature files from the filesystem is
duplicated for local packages and database and needs refactoring.
Signed-off-by: Allan McRae <allan@archlinux.org>
Our curl callback does a whole lot of work for nothing if the front end
never defined a callback to receive the data we'd calculate for it.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
CURLINFO_HTTP_CODE is deprecated in favor of CURLINFO_RESPONSE_CODE.
Both yield the same values.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The files we transfer are generally compressed already, so this just
adds unnecessary overhead.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Use a static variable to effectively track the initialization state of
the progress callback via the last byte amount reported as downloaded by
libcurl.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* introduces new macro in util.h (DOUBLE_EQ) for properly comparing
floating point values
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the (possibly still temporary) output generated during signature
checking into the --debug output.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Once we do this, add support for VerifySig to pactest. We just check if
the repo name contains Always, Never or Optional to determine the value
of VerifySig. The default is Never. pacman uses Always by default but
this is not suitable for pactest.
Original-work-by: shankar <jatheendra@gmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We pass in a db object, so no need to go looking for it in the list on
the handle. This is a remnant of when we passed in a treename, more than
likely.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will serve as the home directory we pass to GPGME when making calls so
we can have a libalpm-utilized keyring.
Signed-off-by: Dan McGee <dan@archlinux.org>
If a .sig file sits side-by-side on the filesystem with a package archive,
read it in during the package struct creation process so we can verify it at
a later time if necessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a new field to the package struct to hold PGP information and
instruct db_read to pick it up from the database. It is currently unused
internally but this is the first step.
Due to the fact that we store the PGP sig as binary data, we need to store
both the data and the length so we have a small utility struct to assist us.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
We will need these for GPG functionality (decoding the base64 encoded
signature stored in the databases).
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Implements FS#23103. Also modify libalpm so it ignores this value
without any warning as we know it is likely to exist.
Signed-off-by: Dan McGee <dan@archlinux.org>
Wrap lines of long length, noticed while creating and messing around
with some of the other maint branch patches.
Signed-off-by: Dan McGee <dan@archlinux.org>
Noticed with the openoffice/libreoffice replacement scheme where many
packages are listed as replacements to one package, thus electing it for
removal multiple times. Ensure a given package is not already present
before placing it in the removal list.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a rather serious data corruption issue that luckily manifested
itself today in a noticable way. A package in testing had replaces
entries read in as ["%RE pkgname", "%RE"] which was clearly wrong. This
happens when we hit the end of an archive block, do not have a newline,
and have to continue reading from the next block to complete the line.
Signed-off-by: Dan McGee <dan@archlinux.org>
Drawing progress bars before calling curl_easy_perform() is needless as
the curl progress callback is called with zero progress before actually
downloading the file anyways. Fixes display of "0%" progress bars when
sync'ing package databases that are already up to date.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This was discussed and more or less agreed upon on the mailing list. A
huge checkin, but if we just do it and let people adjust the pain will
end soon enough. Rebasing should be relatively straighforward for anyone
that sees conflicts; just be sure you use the new return style if
possible.
The following semantic patch was used to do the change, along with some
hand-massaging in order to preserve parenthesis where appropriate:
The semantic match that finds this problem is as follows, although some
hand-massaging was done in order to keep parenthesis where appropriate:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression a;
@@
- return(a);
+ return a;
// </smpl>
A macros_file was also provided with the following content:
Additional steps taken, mainly for ASSERT() macros:
$ sed -i -e 's#return(NULL)#return NULL#' lib/libalpm/*.c
$ sed -i -e 's#return(-1)#return -1#' lib/libalpm/*.c
Signed-off-by: Dan McGee <dan@archlinux.org>
We erroniously dropped the call to _alpm_delta_parse() when macro-izing,
causing segfaults for repos that provide deltas. Addresses FS#23314.
Signed-off-by: Dan McGee <dan@archlinux.org>
Partially addresses the "why doesn't CheckSpace work in a chroot" issue.
We can't make it work, but we can at least detect when it won't work by
checking for a partition for our given installation root. If we can't
determine the mountpoint for this, bail out with an error.
Signed-off-by: Dan McGee <dan@archlinux.org>
this is just some debuggery to allow pacman to operate with both fetch
and curl at the same time. use the PACMANDL variable to control which
library is used.
Signed-off-by: Dave Reisner <d@falconindy.com>
This is a feature complete re-implementation of the fetch based internal
downloader, with a few improvements:
* support for SSL
* gzip and deflate compression on HTTP connections
* reuses a single connection over the entire session for lower resource
usage.
Signed-off-by: Dave Reisner <d@falconindy.com>
Add PM_ERR_LIBCURL to error enum and handle case in error.c by returning
curl_easy_strerror() based on the error number carried by the gloabl alpm
handle.
Signed-off-by: Dave Reisner <d@falconindy.com>
no actual code changes here. change preprocessor logic to include
get_tempfile, get_destfile, signal handler enum, and the interrupt
handler logic when either HAVE_LIBCURL or HAVE_LIBFETCH are defined.
Signed-off-by: Dave Reisner <d@falconindy.com>
Do this in preparation for implementing similar curl based
functionality. We want the ability to test these side by side.
Signed-off-by: Dave Reisner <d@falconindy.com>
Adding the CURLcode is necessary in order to return an error string from
pm_error. Unlike libfetch, curl returns numerical error numbers and does
not maintain a staticly allocated string with the last error generated.
Adding the curl object itself to the handle is advantageous (and
encouraged by curl_easy_perform(3)) because the handle is reusable for
successive operations. This cuts back on overhead when downloading
multiple files in a single transaction.
Signed-off-by: Dave Reisner <d@falconindy.com>
repo-add can add a "files" entry into the sync db. Currently we
do nothing with this file, so explicitly skip it to prevent
unknown database file warnings.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Our keywords were all screwed up in this regard. Fix it so our
ngettext() shortcut calls are actually recognized and respected.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#23090, a rather serious problem where the user was completely
unable to read the local database. Even if entry->d_type is available,
the given filesystem providing it may not fill the contents, in which
case we should fall back to a stat() as we did before. In this case, the
filesystem was XFS but there may be others.
Signed-off-by: Dan McGee <dan@archlinux.org>
A lot of these were places that should have used the same message but
didn't, or were very easy to convert to using the same message and
letting some of the burden off of the translators.
Signed-off-by: Dan McGee <dan@archlinux.org>
Ensure we have a local DB version that is up to par with what we expect
before we go down any road that might modify it. This should prevent
stupid mistakes with the 3.5.X upgrade and people not running
pacman-db-upgrade after the transaction as they will need to.
Signed-off-by: Dan McGee <dan@archlinux.org>
We only call these from the transaction init and teardown, so move them
to that file, mark them static, and push more of the logic of handle
manipulation into these functions.
Signed-off-by: Dan McGee <dan@archlinux.org>
According to FOPEN(3), using fclose on an fdopen'd file stream also
closes the underlying file descriptor. This happened in _alpm_lckmk
(util.c), which meant that when alpm_trans_release closed it again, the
log file (which reused the original file descriptor) was closed instead.
Signed-off-by: Jonathan Conder <jonno.conder@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
There's no API functions exposed which allow manipulation of this type,
so remove it from public view. Also, rename the public and private
alpm_db_get_pkgcache symbol to alpm_db_get_pkgcache_has.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows error messages emitted by the frontend to be a bit more
descriptive and not have the annoying "well why didn't you tell me that
the first time" problem. If a package had multiple missing deps, we
would bail on the first one before rather than finish processing all
missing dependencies, and only print one error message. Instead,
continue through this entire set of missing deps and append all eventual
errors.
The added pactest tests this case, as the to be installed package has
two missing dependencies. However, pactest does not actually test or see
the difference in output from before and after, so it passes in both
cases, but it is clearly visible in the logs.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is old code that has since gone stale; we no longer ever add
anything to this list so no need to keep it around and check the
contents during extraction.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Make conflict_isin() static; it is used nowhere else.
* Remove does_conflict(): it turns out to be replaceable by a single call to
_alpm_depcmp(). By pushing it up, we can reduce calls to _alpm_splitdep()
from 60,368 to 16,940 during one test -Su operation I ran.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Use stat() and not lstat(); we don't care for the size of the symlink if
it is one, we want the size of the reference file.
* FS#22896, fix local database estimation on platforms that don't abide by
the nlink assumption for number of children.
* Fix a missing newline on an error message.
Signed-off-by: Dan McGee <dan@archlinux.org>
Change _alpm_graph_new() to use CALLOC to avoid explicit zeroing out of fields
in pmgraph_t.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Turn it into an enum rather than a boolean, and use a bitmask like we do for
reading DB entries. The relevant flag is turned on in our two calculate
loops, and anything reading the used flag later can decided which flag (or
either) is relevant.
This will allow the read-only partition code to be triggered on a
remove-only operation, e.g. if /boot was read-only and one tried to remove
grub in a sync transaction. Of course, right now, we don't actually run the
diskspace check code in the '-R' codepath.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a bit of a stopgap solution for the problem, but an easier one than
revamping the file conflict checking code to support the same stuff. Using
some more gross autoconf magic, figure out which struct field we need to
look at to determine read-only status and store that on our mountpoint
struct. If we find out we needed this partition after calculating size
requirements, then toss an error.
Signed-off-by: Dan McGee <dan@archlinux.org>
In the getmntinfo() section, the local variable mnt doesn't exist; this
would have caused a compile error if I had tested the code on such a
platform. Unify both codepaths to just run strlen() on the already copied
mount path instead.
Signed-off-by: Dan McGee <dan@archlinux.org>
In packages, our description file contains:
key = value is here
type entries, and we passed "key " and " value is here" to our strtrim
function, causing us to always memmove the value portion to remove the
space. Since this is a throwaway buffer, do the advancing on our own before
trimming to save the need to shift memory around; "value is here" will now
be passed and strtrim will be responsible for trailing whitespace.
Signed-off-by: Dan McGee <dan@archlinux.org>
We did this in some but not all cases, assuming the 0 value coming out of
libarchive would not be a problem. However, this does not work for "fake"
filesystems such as rpc_pipefs, which reports a free block and total block
count of zero.
Fix this by not ever counting symlinks or directories, and adding a note
explaining that if we someday do count directories, their size needs to be
attributed to the proper place.
This patch also includes a few cleanups/performance tweaks- avoid calling
strlen() on the mountpoint directory string as much by storing this size in
our mountpoint struct, and push the snprintf() call up to the calculate
functions since we were already doing it here in the remove case.
Signed-off-by: Dan McGee <dan@archlinux.org>
The overlapping code in _alpm_pkghash_add() and _alpm_pkghash_add_sorted()
are now in a new static function pkghash_add_pkg(). This function has a
third flag parameter which determines whether the package should be added in
sorted order.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
In sync_db_populate() and local_db_populate(), a NULL db->pkgcache is not
caught, allowing the functions to continue instead of exiting.
A later alpm_list_msort() call which uses alpm_list_nth() will thus traverse
invalid pointers in a non-existent db->pkgcache->list.
pm_errno is set to PM_ERR_MEMORY as _alpm_pkghash_create() will only return
NULL when we run out of memory / exceed max hash table size. The local/sync
db_populate() functions are also exited.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
When reading the "desc" file in _alpm_local_db_read(), some
strings are trimmed and checked for length > 0 before their
use/duplication subsequently. They are then trimmed again
when there is no need to.
The following code snippet should illustrate it clearly:
while(fgets(line, sizeof(line), fp) &&
strlen(_alpm_strtrim(line))) {
char *linedup;
STRDUP(linedup, _alpm_strtrim(line), goto error);
info->groups = alpm_list_add(info->groups, linedup);
}
This patch removes the redundant _alpm_strtrim() calls in
_alpm_local_db_read() such as the one inside the STRDUP shown
above.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
PM_ERR_WRITE is defined in alpm.h but not handled in
alpm_strerror(). This patch corrects that.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We located files in a few places but didn't check if they were files or
directories. Ensure they are actually files using stat() and S_ISREG(); this
showed itself when trying to download to the directory name itself in
FS#22645.
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than potentially move every item to the next NULL, attempt to move at
most one item at a time by iterating backwards from the NULL location in the
hash array. If we move an item, we repeat the process on the now shorter
"chain" until no more items need moving.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This takes in the list and a list item, and does the pointer dance necessary
to remove it from the list regardless of whether it is first, last, or
somewhere in the middle. It is useful for callers that already know what
item needs to be removed and have a pointer to it rather than doing a search
by data that the plain alpm_list_remove() does.
Refactor alpm_list_remove() to use this function as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fully removes a package from the hash. Also unify prototype with
removal from an alpm_list_t, fixing issues when removing a package
from the pkgcache.
Signed-off-by: Allan McRae <allan@archlinux.org>
While probably still not optimal in terms of everyday usage in
pacman, this reduces the absolute size increase to "more reasonable"
levels. For databases greater than 5000 in size, the minimum size
increase is used which is still on the order of a 10% increase.
Signed-off-by: Allan McRae <allan@archlinux.org>
Check that the requested size of a pkghash is not beyond the maximum
prime. Also check for successful creation of a new hash before
rehashing.
Signed-off-by: Allan McRae <allan@archlinux.org>
Since the sync database never changes size once we initialize it, we
allow it to be filled a bit more. This reduces the overall memory
footprint needed by the hash table.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to get through the rehash required by smoke001 and pass
all pactests. It is by no means the best or most efficient
implementation but it does do the job.
Signed-off-by: Dan McGee <dan@archlinux.org>
Read the package information for sync/local databases into a pmpkghash_t
structure.
Provide a alpm_db_get_pkgcache_list() method that returns the list from
the hash object. Most usages of alpm_db_get_pkgcache are converted to
this at this stage for ease of implementation. Review whether these are
better accessing the hash table directly at a later stage.
Signed-off-by: Allan McRae <allan@archlinux.org>
This works for both local and sync databases in slightly different ways. For
the local database, we can use the directory hard link count on the local/
folder. For sync databases, we use the archive size coupled with some
computed average per-package sizes to determine an estimate.
This is currently a dead assignment once calculated, but could be used to
set the initial size of a hash table.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Noted in FS#22697. When I factored out _alpm_parsedate() into a common
function, I didn't move the <locale.h> include properly, causing a build
failure when NLS is disabled and this header isn't automatically included
everywhere.
Signed-off-by: Dan McGee <dan@archlinux.org>
This flag allows to disable version checking in dependency resolving
code.
depcmp_tolerant respects the NODEPVERSION flag but we still keep the
original strict depcmp. The idea is to reduce the impact of the
NODEPVERSION flag by using it in fewer places.
I replaced almost all depcmp calls by depcmp_tolerant in deps.c (except
in the public find_satisfier used by deptest / pacman -T), but I kept
depcmp in sync.c and conflict.c
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
It's likely that these interfaces will break sooner or later, now that
pacman no longer uses them.
So better force the two people who use them to migrate their code to the
new add_pkg/remove_pkg interface, which is very easy anyway.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Old interface is marked as deprecated:
int alpm_sync_target(char *target);
int alpm_sync_dbtarget(char *db, char *target);
int alpm_add_target(char *target);
int alpm_remove_target(char *target);
New recommended interface:
int alpm_add_pkg(pmpkg_t *pkg);
int alpm_remove_pkg(pmpkg_t *pkg);
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
For consistency with alpm_add_pkg.
The new recommended interface is alpm_add_pkg / alpm_remove_pkg, all
others interfaces are deprecated.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
This group function is meant to help group handling from frontend : it
scans all dbs, handling ignored packages and duplicate members (the
first repo where a member is found has the priority).
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
This new function is meant to deprecate all existing
sync/add target functions :
int alpm_sync_target(char *target);
int alpm_sync_dbtarget(char *db, char *target);
int alpm_add_target(char *target);
Rather than dropping these 3 interfaces, it might be better to rewrite
them using alpm_add_pkg for now.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
This is a public interface for resolvedep. It looks nicer to expose it
this way rather than through sync_target.
This function can also be helpful for external tools as it should give
good results close to how pacman select a package for satisfying a given
dep.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
If there are multiple providers in one db, pacman used to just stop at
the first one (both during dependency resolution or for pacman -S
'provision' which uses the same code).
This adds a new conversation callback so that the user can choose which
provider to install. By default (user press enter or --noconfirm), the
first provider is still chosen, so for example the behavior of sync402
and 403 is preserved. But at least the user now has the possibility to
make the right choice in a manual run.
If one of the provider is already installed, it is picked for
reinstall/upgrade, so that provision 002/003 pactest now pass.
$ pacman -S community/smtp-server
:: There are 3 providers available for smtp-server:
1) courier-mta 2) esmtp 3) exim
Which one do you want to install?
Enter a number (default=1):
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Perform the cheap struct and string setup of the local DB at handle
initialization time to match the teardown we do when releasing the handle.
If the local DB is not needed, all real initialization is done lazily after
DB paths and other things have been configured anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
We explicitly place 'pkgbase' (and used to place 'force') fields inside
PKGINFO files, so ignore them silently instead of printing an error for
them. Also make the error message for unknown keys actually contain the key.
Signed-off-by: Dan McGee <dan@archlinux.org>
We were returning a package error code rather than a DB one, and we
would leak the archive memory if the database file didn't exist.
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead, go the same route we have always taken with version-release in
libalpm and treat it all as one piece of information. Makepkg is the only
script that knows about epoch as a distinct value; from there on out we will
parse out the components as necessary.
This makes the code a lot simpler as far as epoch handling goes. The
downside here is that we are tossing some compatibility to the wind;
packages using force will have to be rebuilt with an incremented epoch to
keep their special status.
Signed-off-by: Dan McGee <dan@archlinux.org>
Adapting from RPM, follow the [epoch:]version[-release] syntax. We can also
borrow some of their parsing code for our purposes (thanks!). Add some new
tests to our vercmp shell script tester for epoch comparisons, and then make
the code work with these newfangled epoch specifiers.
Signed-off-by: Dan McGee <dan@archlinux.org>
Since it is the same string. Done with some bash looping and sed magic.
for src in po/*.po; do
echo $src
newtrans=$(grep -A1 "msgid.*$1" $src | tail -n1)
newtrans=${newtrans//\\/\\\\}
echo "$newtrans"
fname=${src##*/}
dest=lib/libalpm/po/$fname
sed -i -e "/msgid.*$1/{N; s/msgstr.*$/$newtrans/}" $dest
done
Signed-off-by: Dan McGee <dan@archlinux.org>
In most (all?) cases, we will process all files for a given sync database
entry sequentially. The code currently does an _alpm_pkg_find() for every
file in the database, but we had the "current" package readily available.
Shift some local variables around a bit to expose this to sync_db_read() and
use it if the package is the correct one.
On my system, this cuts calls to _alpm_pkg_find() from 20,769 to 10,349
calls during a -Qu operation, and results in a ~30% speedup of the same
operation (0.35 sec -> 0.27 sec). This benefit should be apparent anywhere
we read in the full contents of the sync databases.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't need to create a temporary copy of the string if we are smart with
our pointer manipulation and string copying. This saves a bunch of string
duplication during database parsing, both local and sync.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove the need for an unconditional string duplication by using pointer
arithmetic instead, and strndup() instead of an unspecified-length strdup().
This should reduce memory churn a fair amount as this is called pretty
frequently during database loads.
Signed-off-by: Dan McGee <dan@archlinux.org>
