Similar to what we did in edd9ed6a, disconnect the relationship with our
stack allocated error buffer from the curl handle. Just as an FTP
connection might have some network chatter on teardown causing the
progress callback to be triggered, we might also hit an error condition
that causes curl to write to our (now out of scope) error buffer.
I'm unable to reproduce FS#26327, but I have a suspicion that this
should fix it.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Our error message used to be very unclear when the configuration file
could not be found:
$ ./pactree -lsr gtk
error: failed to register sync DBs
Instead, display an accurate message and include the file name:
$ ./pactree -lsr gtk
error: config file /usr/local/etc/pacman.conf could not be read
Also, move the error message inside register_syncs() to allow for
differentiating between different errors that might require a handler in
the future.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows for specifying an alternate configuration file path, similar
to pacman's "--config" option.
Given that there is currently no other way to tell pactree to read from
another configuration file (except for patching or symlinking), this
seems totally sensible - even if there are plans to refactor and/or
replace the standalone configuration file parser.
We do not define a short option for the sake of consistency with
pacman's set of command line options.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
Inline comments after pkgver or pkgrel would cause the sanity
checks to fail so remove them before checking the value.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Make the output into a single block and add separators at the end
so that they do not merge into each other.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The original code- pkg_dir="$(echo $pac_db/$pkg_name-[0-9]*)" is
problematic in several ways:
- $pac_db and $pkg_name should be quoted, obviously.
- It assumes pkgver always starts with an integer, while in fact
it just can't contain ':' and '-'.
Counterexample: the code breaks on lshw B.02.15-1.
- It assumes there are no more than one directory matching the
pattern. While this should be the case if everything works
perfectly, it certainly relies on external conditions.
Counterexample: if the local db contains two packages named
foo and foo-3g, even if everything else is perfect, the code
will match two directories.
Don't make assumptions, use what is known.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
This includes:
- Quoting fixes.
- Drop deprecated mktemp option -p.
- Set extglob nullglob shell options at the top.
- Use extended globbing instead of regex to match %HEADER% in pacman db.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
Another style change. The [[ expression ]] form is particularly
cleaner, safer and more powerful than the [ expression ] form.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
As every piece of code in the whole project uses TAB as indentation
character, bacman shouldn't be an exception.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
This will have to be picked up downstream of course, but addresses
FS#25684 now that this is a lot faster in 4.0 than it was in the
original 3.5 implementation.
Also make curl the first XferCommand listed, as we are moving away from
any other download program at this point.
Signed-off-by: Dan McGee <dan@archlinux.org>
This makes the maintainer's life (read: my life) a lot easier when
updating translation files to push to Transifex.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows it to serve double-duty. In order to allow users to base
verification decisions off of both a valid signature and a trusted
signature, we need to assign some level of owner trust to the keys we
designate as trusted on import.
Signed-off-by: Dan McGee <dan@archlinux.org>
* --import now only imports keys from pubkey.gpg and does not import
owner trust; if you want to have both simply run the operations in
sequence.
* --import-trustdb has been simplified; it will overwrite existing
values in the trust database as before, but there is no need to export
it first as those values are safe if left untouched.
* Fix the manpage referring to a non-existent option.
Signed-off-by: Dan McGee <dan@archlinux.org>
If PKGEXT is not one of the recognized tar*'s, create_package() would
create an empty package file and fail, since bsdtar on the left side of
the pipe returns 141 on SIGPIPE (broken pipe).
This patch changes the behavior for an invalid PKGEXT. A warning is
printed on stderr, and a tar file is created. Also retire the obsolete
$EXT variable.
Add the obligatory comment why we don't use bsdtar's compression.
Finally, fix mixed-tab-space indentation.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Expose the current static get_pkgpath() function internally to the rest
of the library as _alpm_local_db_pkgpath(). This allows use of this
convenience function in add.c and remove.c when forming the path to the
scriptlet location.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add an is_archive parameter to reduce the amount of black magic going
on. Rework to use fewer PATH_MAX sized local variables, and simplify
some of the logic where appropriate in both this function and in the
callers where duplicate calls can be replaced by some conditional
parameter code.
Signed-off-by: Dan McGee <dan@archlinux.org>
Always quote the right-hand side of expression when the == or != operator
is used, unless intended as a pattern.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Declare and initialize integer variables 'needsroot' and 'verbose'.
Don't use the fact that (( undefined_variable )) evaluates to 0.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
We're ill equipped to be using this flag as we don't trap and respond to
the ERR signal. The result is that if is ever tripped, pacman-key will
instantly exit with no indication of why. At the same time, we're
already fairly good about doing our own error checking and verbalizing
it before dying.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents the error trap being set off when GPGDir is commented
in pacman.conf. Bug introduced in 507b01b9.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Printing all of "Installed", "Removed" and "Net Upgrade" sizes is
redundant as the difference of the first two is the last. Instead,
only print "Installed Size" and "Net Upgrade Size" when both the
installed and removed are non-zero.
This results in the following output in the following cases:
- package installation only: Installed Size
- package removal only: Removed Size
- package installation involving replacement: Installed + Net Upgrade Size
- package upgrade: Installed + Net Upgrade Size
- combination upgrade and installation: Installed + Net Upgrade Size
Download Size remains outputted whenever something is downloaded.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Verify the argument to -k is a non-negative integer. Leading zeros
are simply stripped.
'declare -i keep' allowed the argument to -k to be any arithmetic
evaluation expression. The simple assignment 'keep=$OPTARG' triggers
arithmetic evaluation implicitly, which can either consume a huge amount
of resources with input such as '2**2**32' or immediately produce an error
on invalid input. Instead, we simply 'declare -- keep' and avoid all that.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Printing "[removal]" beside all package names is redundant when all
packages are being removed (i.e. when using -R).
Signed-off-by: Allan McRae <allan@archlinux.org>
This is a poor place for it, and it will likely move again in the
future, but it's better to have it here than as a static variable.
Initialization of this variable is now no longer necessary as its
zeroed on creation of the payload struct.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Always quote the right-hand side of expression when the == or != operator
is used, unless intended as a pattern.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
Always quote the righthand side of expression when the == or != operator
is used, unless intended as a pattern. Quoting bash(1):
When the == and != operators are used, the string to the right of the
operator is considered a pattern. Any part of the pattern may be quoted
to force it to be matched as a string.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
This also fixes a memory leak and makes the dual-purpose "rows" variable
go away in favor of storing the rows and non-verbose names separately.
This also fixes some potential memory leaks and/or wrong behavior due to
the config->verbosepkglists flag being flipped, which we should never be
doing.
Signed-off-by: Dan McGee <dan@archlinux.org>
This was done to squash a memory leak in the sync database download
code. When we downloaded a database and then reused the payload struct,
we could find ourselves calling get_fullpath() for the signatures and
overwriting non-freed values we had left over from the database
download.
Refactor the payload_free function into a payload_reset function that we
can call that does NOT free the payload itself, so we can reuse payload
structs. This also allows us to move the payload to the stack in some
call paths, relieving us of the need to alloc space.
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than always initializing it on any handle creation. There are
several frontend operations (search, info, etc.) that never need the
download code, so spending time initializing this every single time is a
bit silly. This makes it a bit more like the GPGME code init path.
Signed-off-by: Dan McGee <dan@archlinux.org>
The prompt can be rather confusing otherwise when all files have already
been downloaded, but there is not a single total size listed.
Signed-off-by: Dan McGee <dan@archlinux.org>
Better scoping of variables for the most part, and ensure we are using
string_length() and not strlen() as appropriate. Also refactor the
longest cell code to call string_length() a lot less; by simply using an
array of max sizes we don't have to recompute values nearly as much.
Signed-off-by: Dan McGee <dan@archlinux.org>
For getcols(), the functions we call return a value of type 'unsigned
short', so it makes sense for us to do the same.
string_length() is meant to behave like strlen(), so it should return
type size_t. This exposes other functions such as indentprint() which
should also be using signed return types.
Signed-off-by: Dan McGee <dan@archlinux.org>
We now label the old 'Size' column as 'Net Change' to reflect the
reality of what we are looking at. Sync operations now get an additional
'Download Size' column.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to sort the output list by showing all pulled
dependencies first, followed by the explicitly specified targets.
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than free them right away, keep the list on the transaction as
we already do with add and remove lists. This is necessary because we
may be manipulating pointers the frontend needs to refer to packages,
and we are breaking our contract as stated in the alpm_add_pkg()
documentation of only freeing packages at the end of a transaction.
This fixes an issue found when refactoring the package list display
code.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is definitely not in the normal hot path, so we can afford to do
some temporary heap allocation here.
Signed-off-by: Dan McGee <dan@archlinux.org>
No wonder these were slower than expected. We were only reading 4
(32-bit) or 8 (64-bit) bytes at a time and feeding it to the hash
functions. Define a buffer size constant and use it correctly so we feed
8K at a time into the hashing algorithm.
This cut one larger `-Sw --noconfirm` operation, with nothing to
actually download so only timing integrity, from 3.3s to 1.7s.
This has been broken since the original commit eba521913d introducing
OpenSSL usage for crypto hash functions. Boy do I feel stupid.
Signed-off-by: Dan McGee <dan@archlinux.org>
