It was noted in FS#17533 that setgid bits are carried down into any created
subdirectories, and thus could end up being in a built package if the
original package directory was marked g+s. When we create src/ and pkg/,
explicitly chmod them to remove any sticky bits.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
When PKGDEST pointed to a non-writable location, makepkg would fail
after completing the build process. This patch makes it abort as
soon as PKGDEST is parsed.
Also, move the SRCDEST check to the same point rather than right
before downloading sources (which was after dependency checks).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Introduce $SRCPKGDEST to define a destination dir for source packages
instead of saving them in $PKGDEST with binary packages.
The simple patch doesn't break old behavior.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
When makepkg exits in create_srcpackage(), the (temporary) srclinks
directory is left behind.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently, "makepkg -R" creates a package with a wrong updated $pkgver.
Signed-off-by: Nezmer <Nezmer@allurelinux.org>
[Allan: adjusted comment]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is particularly useful when using pacman wrappers which call sudo
by themselves and therefore should not be run as root.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If PACMAN environment variable is set, makepkg will try to use this
command to check for installed dependencies and to install or remove
packages. Otherwise, makepkg will fall back to pacman.
Implements FS#13028.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: move envvar section in manpage]
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a check that the package does not contain references to the
folder it was built in.
Fixes FS#14751
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows makepkg to only build a specified subset of packages
from a split PKGBUILD. This is very useful in combination with the
-R flag or when bumping the pkgrel of a single package.
Fixes FS#15956.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When PKGDEST is used, symlinks to the packages will be put in the build
directory. This combines the convenience of a global package cache with
the ease of having a package (i.e. a symlink) in the build directory for
testing and installation purpose.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
[Allan: add comment documenting clean-up addition]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
For some packages, generally the 'any' arch ones, a build step is not
required and therefore can be skipped. In these cases, a package()
function without a build() one is sufficient.
As a side effect, this commit makes meta packages without any function
at all in the PKGBUILD possible.
Fixes FS#15147.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Since commit fb97d32, which brought in this test, support for split
PKGBUILDs was added, and therefore, all values of pkgname and also
pkgbase have to be checked now.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
makepkg looks for a package() function when building a single package
but package_$pkgname() style package functions when building a split
package. This patch allows the use of a package_$pkgname() function
when building a single package for consistency. This is achieved by
having makepkg consider a non-split package with a package_$pkgname()
function as a split package (creating just the one package).
Fixes FS#16622.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
* FS#16623, second half of makepkg
* Includes stuff like -o to ||, -a to &&, etc.
* if [ $(type ... preserved due to a bash bug with [[ and set -e and ERR traps
Signed-off-by: Isaac Good <pacman@isaac.otherinbox.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* FS#16623, first half of makepkg
* Includes stuff like -o to ||, -a to &&, etc.
* if [ $(type ... preserved due to a bash bug with [[ and set -e and ERR traps
Signed-off-by: Isaac Good <pacman@isaac.otherinbox.com>
[Dan: made commit message useful]
Signed-off-by: Dan McGee <dan@archlinux.org>
FS#16623 suggested this change for makepkg; this patch applies it to the
remaining files in the scripts directory.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Dan McGee <dan@archlinux.org>
The source command triggers / might trigger the ERR trap which makes
makepkg abort right after a successful installation of missing
dependencies.
Thanks to Xavier Chantry <shiningxc@gmail.com> for finding this
solution.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#16871 and makes the pkgdesc workaround obsolete.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently makepkg takes the commandline arguments, assigns them to a
variable and passes that variable to the next makepkg call (within
fakeroot).
Use a comination of quotes and arrays in this process to ensure any
arguments passed within quotes and containing spaces stay as a single
argument during the second makepkg call.
Thanks to Dan for figuring out how to get this working.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
In doing so, it is possible to get rid of all the tests for colored
messages except for one global one.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
pkgbase is used in the following rm calls, and since pkgname can be
present when pkgbase is not, it is safer to check for pkgbase.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit c7e4d10d introduced a small error in the testing of whether
a package is already built.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows building a mixture of binary and arch=any packages.
Fixes FS#15955.
The value of CARCH is no longer overridden to "any" in when arch=any
is used and the assigning of the "any" arch is delayed to during the
packaging stage. Adjustments were required to fix installing and
checking for pre-built packages of varing arches.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixing a single package within a split package requires the overriding
or pkgrel. In very rare (but existing) cases, it is useful to
override pkgver. Partial fix for FS#15955.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This also removes the awk dependency from makepkg and repo-add.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently, a changelog is added to a package if a specific file with a
hardcoded name exists in the PKGBUILD's directory. This approach is not
pretty and also inconsistent with the handling of install files, but it
works.
With the introduction of split PKGBUILDs, however, a drawback in this
old behavior has arisen: you only have the possibility to include one
specific changelog file in either every package defined in the PKGBUILD
or in none.
The use of an additional variable, `changelog`, works around this issue
and makes it possible to include a changelog in only some of the
packages, and besides, each package of the PKGBUILD can have its own
changelog file.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When redirecting both stderr and stdout and using the 2>&1 construct,
you have to redirect stdout first. Otherwise stderr will be redirected to
the 'old' stdout and not to the new resource.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Dan McGee <dan@archlinux.org>
This removes python optdepends in pacman package
This bash clone is a courtesy of
Matthew Bruenig <matthewbruenig@gmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
-f/--force has been dead for a while, so kill it off. In addition, the
check for > 2 args is pretty useless when you do something like:
repo-add -q -q
or a more legit:
repo-add -q /path/to/mine.db.tar.gz
So instead make repo-add just return 1 when it doesn't do anything with
the database which seems to make more sense.
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than creating no database at all, create an empty zipped tar archive
in its place. This keeps the download side of repositories a bit more sane
as a DB will always exist, and pacman handles this empty case just fine.
For this to be fully transparent, we also need to make sure repo-add and
repo-remove accept an empty "DB" as an argument, which in reality is a
completely void of files .tar.{gz,bz2,xz} archive.
Signed-off-by: Dan McGee <dan@archlinux.org>
Various tidying to the usage output
- change "--config <config>" to "--config <file>" to prevent wrapping in a 80 character wide terminal
- re-alphabetise options, including moving all long only opts to the end
- use same indentation for additional pacman options
- remove useless comment
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add more untranslated strings, improve consistency, etc.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
only allow optdepends like:
pkgname: description
some (real) examples of invalid optdepends:
'tcl, python and/or ruby: to use corresponding binding'
'xorg-fonts-75dpi : X bitmap fonts needed for the interface'
'ruby-htmlentities (AUR): for one provider named Deastore'
'xpdf - for pdf'
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Allan: rebase off de39a1f6 and adjust man page]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This implements FS#13551
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
These two functions were very similar.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Set the ERR trap to abort upon encountering an error during the execution
of a build or package function.
Activate set -E, which lets functions inherit the ERR trap.
Signed-off-by: Henning Garus <henning.garus@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
similarly to the $repo variable, Server can now contain $arch, which will be
automatically replaced by the appropriate architecture.
This allows us to have one universal mirrorlist file, for both i686 and x86_64,
woohoo!
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Make bunzip2/xz/gunzip decompressing to stdout, because gzip does not offer
something like a -k option.
The selection of the decompression command for gzip/bzip2/xz compressed
files now also depends on the file suffix, since we need to strip the
extensions to get the output filename.
Thanks to Cedric Staniewski <cedric@gmx.ca> for reporting this issue and
contributing patches.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Implements FS#15830
This option allows to build a PKGBUILD with no checksums
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
All other "dep" functions (check_deps, resolve_deps, remove_deps)
have underscores separating words.
Being consistent, convert handledeps to handle_deps.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 01f9ae63 moved that creation of the PKGINFO file to before changing
to pkgdir. This causes issues when using the -R option (FS#15851).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commandline arguments starting with a hyphen are usually recognized as
options by unix tools. Therefore, allowing hyphens at the beginning of a
package name requires a different handling of pkgnames as suggested by
rm's manpage.
It would be possible to make the scripts 'hyphen-safe', but
hyphen-prefixed packages will cause trouble for pacman users which do
not know these tricks.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
[Dan: remove the repo-add check]
Signed-off-by: Dan McGee <dan@archlinux.org>
As reported in FS#15210, we have some problems with split packages and
variable overrides because of this patch. For now, in prep for a release, it
is best to back it out and see what we can do later.
This reverts commit 621aa26e26.
Signed-off-by: Dan McGee <dan@archlinux.org>
With split packages, the pkgbase variable provides a useful way to
find out which packages were build from the same PKGBUILD. Add it
to the packages .PKGINFO file and the repo database only when
package splitting is used.
Original-patch-by: Pierre Schmitz <pierre@archlinux.de>
[Allan: restrict to including only with spilt packages
and include after pkgname]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
FS#15448 (which is made worse by the "fix" for FS#14727...), highlighted
some deficiencies in the usage of the BUILDSCRIPT variable. In particular,
only relative paths worked with "-p" and some output was very strange in
combination with the "-p" flag or reading from /dev/stdin. e.g.
"Please add a license line to your /dev/stdin!".
This patch adds a new variable, BUILDFILE, which contains the full path
to the BUILDSCRIPT. This defaults to $startdir/$BUILDSCRIPT.
Also, fix a missed quoting of $BUILD{SCRIPT->FILE} and remove warning
about missing BUILDSCRIPT definition in makepkg.conf as the default
BUILDSCRIPT value is now specified during configure. Add check that
BUILDFILE is writable before updating VCS PKGBUILDs. When making a source
package, the BUILDSCRIPT always gets given the default name, regardless
of what it was originally called.
Signed-off-by: Allan McRae <allan@archlinux.org>
Ensure we don't pass a bare filename to printf that might contain a
lookalike '%' escape sequence. Fixes part of FS#15323.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
We currently fall apart on files with spaces in the names.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Makes sure the required package functions are present when using package
splitting. Also moves setting of pkgbase variable outside the
check_sanity function to somewhere more appropriate.
Signed-off-by: Allan McRae <allan@archlinux.org>
A pkgdesc with spaces in it would get restored to an array and thus only
the first word would be restored (FS#15210). Convert that array back to a
string.
Signed-off-by: Allan McRae <allan@archlinux.org>
Errors in build() functions were only fatal, if "--log" was enabled. Errors in
package() functions were never fatal. Piping these functions through "cat -"
triggers error trapping. This prevents the need for "|| return 1" usage in
PKGBUILDs.
Original-patch-by: Juergen Hoetzel <juergen@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Checks if some or all packages are built before overwriting/installing.
Adds some new strings for translation.
Signed-off-by: Allan McRae <allan@archlinux.org>
When unzipping packages and the database archives, we don't need to look
through the entire archive to do what we need to do. For packages, .PKGINFO
should only be found once and should be the first file in the package. For
the database check, we only really need to look for one desc file.
The bsdtar -q option is very similar to the GNU tar --occurrence=1 option.
Example of speedup:
$ time repo-add junkdb.db.tar.gz *.pkg.tar.gz >/dev/null
real 0m16.159s
user 0m14.836s
sys 0m2.277s
$ time ./scripts/repo-add junkdb.db.tar.gz *.pkg.tar.gz >/dev/null
real 0m4.949s
user 0m3.730s
sys 0m2.093s
Signed-off-by: Dan McGee <dan@archlinux.org>
It wouldn't be very nice to ship a PKGBUILD with the wrong checksums.
Signed-off-by: Loui Chang <louipc.ist@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The backup and restore of variables that can be overridden while
making split packages only dealt with the first element, not the
whole array (FS#15010). Adjust the bash voodoo to fix it...
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If PKGBUILD was good, the "insane" variable was not defined and so
the if statement failed. Simplify and fix this check.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
No new checks, just move it into a function and return 1 rather than exit
directly. This also allows the use of local variables.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Before this commit, the repo creation could fail after all packages have
been added to the database. Now this will be detected before adding
anything.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This simple patch adds support for the xz archive format to makepkg and repo-
add.
Xz can be used as source, package and package db file type.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
[Dan: fixed a few alignment issues]
Signed-off-by: Dan McGee <dan@archlinux.org>
The bash source command looks in the users PATH for the file to source
before the local directory. This causes issues when someone has a
PKGBUILD somewhere in their path (for unknown some reason...).
Fixes FS#14727.
Signed-off-by: Allan McRae <allan@archlinux.org>
When making a source package for a SCM PKGBUILD, makepkg should not
update the pkgver/pkgrel. Noted in FS#14456.
Signed-off-by: Allan McRae <allan@archlinux.org>
1) Do not attempt to strip compressed binaries
Original-work-by: Marc - A. Dahlhaus <mad@wol.de>
2) Add "\" in "GPL\'ed" so quote mark does not break source code highlighting
3) Add local to docdir paths in makepkg.conf for consistency
4) Use full path to sed in MacOSX in case users have GNU sed earlier in
path
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Do a sed replacement in-place is not very portable. On Mac OSX and
BSDs, the syntax is "sed -i ''" where as with GNU sed the command is
"sed -i''" or just "sed -i". This patch detects which command should
be used during configure.
Credit to Kevin Barry who researched this issue and provided a patch
to work around this using temporary backup files.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The index in the for loop wasn't being incremented, so
if the first file wasn't found, the second file would be compared to the
first checksum, rather than the second.
Signed-off-by: Loui Chang <louipc.ist@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
After the splitpkg implementation, the tidy_install function
was not being called in PKGBUILDs with only the build() function.
Signed-off-by: Allan McRae <allan@archlinux.org>
Fixes FS#13417. Do no exit makepkg on a failure to install the
built package(s). This allows clean-up to still occur.
Signed-off-by: Allan McRae <allan@archlinux.org>
The log files now have -build or -package at the end and there
are separate log files for each *_package() function. Alter
clean_up() to deal with this. Also, move glob outside quotes so
this actually works.
Signed-off-by: Allan McRae <allan@archlinux.org>
The pkgbase variable is added to improve informational output and
source package naming when using split packages. Defaults to
${pkgname[0]} if not set.
Also:
- move splitpkg detection to after pkgname presence is verified
- add "cd" line to package_foo() functions in splitpkg proto
Signed-off-by: Allan McRae <allan@archlinux.org>
The modification time on depends and desc file were changed to match the
modification time of the package file. I don't see why and we are actualling
losing information here. If we want to know the date of the package file, we
can just look inside the depends file. If we want to know when the entry was
created, we should not alter the modification time of depends and desc.
Besides, this had the non-obvious and undocumented side effect that the
depends file was always created, even if it was empty. And pacman actually
does require that. So I added a "touch depends" to always create the file.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Weird things could happen if several repo-add were run concurrently on the
same database. The introduced locking system will prevent this to happen.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
- arch was missing
- backup is not used by repo-add. However makepkg still needs to put it in
PKGINFO because pacman uses it
- startdir is no longer used after the new delta implementation
- the declaration of group, depend, backup, etc is not needed because these
variables are always declared before being used :
declare $var="$val"
case "$var" in
group) _groups="$_groups$group\n" ;;
- reorder the variables declaration to follow the same order than they are
written to the depends and desc file, for making future checks easier
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Use the correct database format
Use xdelta3 to get the source and destination files from the delta itself
Allow delta files to be added with repo-add just like package files. delta
files can also be removed with repo-remove. This is simply done by looking
for a .delta extension in the arguments, and calling the appropriate
db_write_delta or db_remove_delta functions.
Example usage:
repo-add repo/test.db.tar.gz repo/libx11-1.1.99.2-2-x86_64.pkg.tar.gz
repo-add repo/test.db.tar.gz repo/libx11-1.1.5-2_to_1.1.99.2-2-x86_64.delta
repo-remove repo/test.db.tar.gz libx11-1.1.5-2_to_1.1.99.2-2-x86_64.delta
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
The current implementation has several problems :
Wrong database format
All the info is taken from the filename, which is a bit ugly
It looks for .delta files in the current directory when adding a package,
which is not very flexible
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
* report when a package entry to be removed is not found
* backup and restore eventual "deltas" files
* slight optimization when looking for an entry : only look at the entries
starting with $pkgname
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
This should obsolete the delta support in makepkg. Having a separate script
should be more flexible.
Example usage:
$ pkgdelta repo/tzdata-2009a-1-x86_64.pkg.tar.gz repo/tzdata-2009b-1-x86_64.pkg.tar.gz
==> Generating delta from version 2009a-1 to version 2009b-1
==> Generated delta : 'repo/tzdata-2009a-1_to_2009b-1-x86_64.delta'
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
1) The changes to sync.c look big but there are mostly caused by
the indentation. Fix a bug where download_size == 0 because the packages and
deltas are already in the cache, but we still need to build the deltas list
and apply the deltas to create the final package.
2) Fix the gzip / md5sum issue by switching to xdelta3, disabling external
recompression and using gzip -n in pacman, and disable bsdtar compression
and using gzip -n in makepkg.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
The pkgdelta script can be used instead.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 1e656c0a introduced the changing of pkgrel to 1 when the
pkgver was updated in SCM PKGBUILDs. However, the output in the
"Making package:" was wrong. Attempting to fix that created
another bug (FS#13416). Interestingly, pkgver was only ever
being updated in the fakeroot stage which caused this problem.
Now both pkgver and pkgrel are updated after the first
devel_check and devel_update. Enjoy the really long explaination
for a two line fix...
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Rework slightly db_write_entry so that $pkgfile is no longer referenced
from the temporary dir. This means $pkgfile can be a relative path and does
not need to be converted with realpath anymore.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
REPO_DB_FILE does not need to be an absolute path anymore so no need to
call realpath.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This function was used only once, was basically just one line, and was also
called with an unused argument.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
eval was ugly and dirty, and bit us here. Instead, use a safer form of
variable declaration to ensure quotes don't foil us in pkgdesc or any other
fields.
This fixes FS#10837.
Signed-off-by: Dan McGee <dan@archlinux.org>
The Linux and BSD versions of strip have the --strip-debug option (as
well as the -S option), however Mac OS X only has -S.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The goal of this fix was empty string comparisons:
- if [ "$pkgname" != "" ]; then
+ if [ -n "$pkgname" ]; then
Signed-off-by: Dan McGee <dan@archlinux.org>
In a lot of places, we had the following construct:
[ "$foobar" = "0" ]
which is better represented by using the integer tests:
[ $foobar -eq 0 ]
Attempt to unify makepkg to use the latter rather than the former in all
places. From here on out we should ensure anything that is set to 0, 1, etc.
uses the -eq format rather than =.
In addition, fix a few other test anomalies including usage of double
equals.
Signed-off-by: Dan McGee <dan@archlinux.org>
When using the optional package() function or split packages, the
entire packaging step is rerun instead of just final package
creation step.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
* am/splitpkg:
makepkg: implement creation of split packages
makepkg: Optional argument for run_package and create_package
makepkg: hack around tee in run_package function
makepkg: add functions for backup and restore of package fields
makepkg: add optional package function
makepkg: Add PKGBUILD-split.proto
Generalize run_package to allow the passing of a package name
directing the use of an alternative package function. A similar
adjustment to create_package to prepare split packages.
Signed-off-by: Allan McRae <allan@archlinux.org>
Piping the package function through tee to log the outut also
clears any variables set in the package function. This is a
problem in split packages as package variable overrides are done
in the package function. This is fixed by creating a node which
the output is piped through and duplicated using the tee function.
Signed-off-by: Allan McRae <allan@archlinux.org>
Adds functions for the backup and restoration of package variables
that can be over-ridden during package splitting. Variables which
can be overridden are given in the splitpkg_overrides variable.
Signed-off-by: Allan McRae <allan@archlinux.org>
This patch allows us to split the building and packaging stages of
a PKGBUILD and minimize fakeroot usage. This can be done with less
code duplication (run_build and run_package look quite similiar) but
the run_package function will be where the package splitting logic
is implemented in the future.
Signed-off-by: Allan McRae <allan@archlinux.org>
Considering one can easily run:
repo-add .... >/dev/null
to get only warnings and errors, the -q flag is mostly useless.
Make the -q flag silence only level 2 messages.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch started as a simple typo fix (pugre instead of purge in two
places), as well as a fix of a test which was using PURGE_TARGETS instead of
$PURGE_TARGETS.
It evolved in a slight handling change of the OPTIONS which have a variable
affecting their behavior (strip STRIP_DIRS, docs DOC_DIRS, zipman MAN_DIRS
and purge PURGE_TARGETS), as well as a clarification in makepkg.conf. Now
when a variable is undefined or empty, the corresponding option will have no
effect. It looked weird to have a fallback when a option is defined but
empty, it seems more natural to not have any fallbacks.
Also re-enable docs by default. It seems arbitrary to delete files from
packages by default, and it would be more vanilla and distro agnostic to
keep them. docs was also the only negated option.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Provide support for specifying LDFLAGS within makepkg.conf but leaves
this undefined by default. Fixes FS#12542.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 4b183bf9 moved makepkg.conf sourcing to after the parsing
of options, breaking the -p option and --help output. The solution
is to move BUILDSCRIPT out of makepkg.conf. This patch moves the
definition BUILDSCRIPT back to makepkg itself and adds configure
option to allow easy changing of this value during build time.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The purge option, combined with the PURGE_TARGETS variable,
allows makepkg to automatically remove commonly confliting or
removed files (e.g. /usr/share/info/dir, *.pod).
Original work: Tim Yang
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Adds defined options to the PKGINFO file in the form of "makepkgopt =".
It may be useful to be able to add these to the pacman DB at some point
as that would allow (e.g.) checking which packages have had their docs
striped (FS#7092).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents makepkg compressing every file when MAN_DIRS is not
supplied in makepkg.conf
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Provides a MAN_DIRS variable in makepkg.conf which can be used
to specify folders to look for manual (man and info) pages to be
compressed. Useful for packages that install to /opt. Also
clarifies that "zipman" means "zip manuals" and covers both man
and info pages.
Original work by: Tiago Pierezan Camargo <tcamargo at gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Using > or < in the provides array is wrong so make it cause an error.
Fixes FS#12540.
Also, use bash substitution rather than spawning new processes where
possible in the error checking. Move split package detection to a
better position.
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: backport to maint]
Signed-off-by: Dan McGee <dan@archlinux.org>
The use if "! -z" to check if a string is not null is not good practice
so replace with the "-n" option. Also use the AND comparison within one
test rather than on two separate tests.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allows specifying alternative build script with spaces in name
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: backport some of the fixes to maint]
Signed-off-by: Dan McGee <dan@archlinux.org>
This will allow makepkg to work on systems like Mac OS X where the
default getopt is too old to properly handle long options.
The new parse_options function should replicate getopt's behaviour
completely.
Original work: Yun Zheng Hu <yunzheng.hu@gmail.com>
[Allan: Rewrite and bug fixes]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
1. Do not warn people about missing arch if they are using --ignorearch.
2. Remove unneed reference to bug report about using fakeroot as little
as possible. We want to do that, bug report of not.
3. Removes superfluous warning given when building as root. The user
has already used the "--asroot" flag.
4. Move comment about skipping warning message to above where it occurs
5. Do not warn about skipping source retreval, integrety checks and
extraction when using --repackage
6. Do not warn about skipping build when using --repackage
7. Move comment about fakeroot usage to above test condition
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fix the issue uncovered by FS#12344. In this instance, the dotglob shopt was
being set in the build() function but never cleared, causing issues in the
remaining parts of the makepkg script.
Signed-off-by: Dan McGee <dan@archlinux.org>
Not only does this require less sed-magic, it also fixes FS#12286 where
fetching the revision number fails if mercurial is in compact mode.
Signed-off-by: Dan McGee <dan@archlinux.org>
If PKGBUILD (BUILDSCRIPT) is not found, test for information from a
pipe and use that. Fixes FS#9187.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Do not attemp to update pkgver/pkgrel when reading a SCM based PKGBUILD
from a pipe.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch addresses quite a few lingering issues in the pacman-optimize
script. FS#11767 provoked this look-over and the following issues were
noticed and fixed:
* If an alternate dbroot was specified, then the lockfile location was never
updated to reflect it. The lockfile location is now set after all dbpath
initialization.
* The inclusion of a trailing slash on dbroot was problematic and led to the
following command being executed:
bsdtar -xpf /tmp/pacman-optimize.p12Q4vAUWY/pacman-db.tar.gz \
-C /var/lib/pacman/.new/
It is doubtful we meant to create a hidden directory like this below our
database root, only to go and delete it a second later and then
re-extract. Fix the whole thing by ensuring our dbpath has its trailing
slash stripped and then appending it when necessary.
* The DB extraction was performed twice for no real apparent reason. This
opens the door for extraction problems the second time around, leaving you
with no original database to fall back to. Change the behavior so we only
extract once, and then perform a directory shuffle once we verify the
checksums are correct.
* Perform an explicit sync after we drop the new database on the disk. It
should work better this way.
* Tighten up our check for a pacman lockfile and the time we create one.
There is still a possible race condition but the window is shorter.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is similar to the change we made in makepkg so it is cross-platform
compatible and doesn't require coreutils.
Signed-off-by: Dan McGee <dan@archlinux.org>
Inspired by commit 7e8f1469c4, use our given
PKGEXT or SRCEXT to determine what method of compression to use on the
package we create. If the extension is invalid, this should fall back to
creating a non-compressed tar file.
Signed-off-by: Dan McGee <dan@archlinux.org>
When we do our sed edits, we really don't need every command printed out to
the terminal. Now with "make -s", the output is quite palatable.
Signed-off-by: Dan McGee <dan@archlinux.org>
A source entry can now have the following form, to specify a different
filename :
"filename::http://path/to/file"
Of course, the old syntax is still supported :
"http://path/to/file"
And as before, in the second case, the filename used is simply "file".
This fixes FS#11292, because handling multiple source files with the same
name is now possible (just choose a different filename).
But it will also allow to deal much more nicely with funny url like this by
using a sane filename (and unfortunately, there are quite a few) :
http://www.vim.org/scripts/download_script.php?src_id=6992
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
DB_COMPRESSION was only used in repo-add and DB_CHECKSUMS was not used
anywhere.
This also removes the dependency on makepkg.conf in repo-add, so repo-add no
longer needs to source makepkg.conf
And instead of DB_COMPRESSION, it seems better to just check the extension
of the repository file. It does not make sense to have a tar.gz file with a
tar.bz2 extension or whatever.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently we use the INTEGRITY_CHECK array from makepkg.conf to limit both
the integrity sums generated and checked. It doesn't make a whole lot of
sense to ignore integrity sums that are present in a PKGBUILD, so this patch
will enable checking any that are available, but will only print a warning
about missing sums for those types found in INTEGRITY_CHECK.
It also adds a slight optimization of checking for openssl- we only need to
check once now because we use the same program for all checks.
Signed-off-by: Dan McGee <dan@archlinux.org>
As far a package building is concerned, info pages need to be treated
in the same fashion as man pages in that they both can be compressed.
This separates them from other forms of documentation and so it makes
sense to make that distinction within makepkg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
pacman already localizes the yesno stuff, so doing the same in makepkg is
more consistent.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#11283 , which was originally reported on the forums :
http://bbs.archlinux.org/viewtopic.php?id=53794
Insensitive comparisons were implicitly made before since md5sum --status was
used for checking. Now that we use openssl and compare checksums manually in
bash, we lost that feature.
This can be easily reintroduced using tr '[A-F]' '[a-f]'
What convinced me to fix it is that the md5 command line tool generates md5sums
in upper case by default :
http://www.fourmilab.ch/md5/
And finally, A-F and a-f are the same in hex and both are used.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 149839c539 introduced a small behavior regression as a drawback
for a better portability. repo-add now includes the approximate size (to the
nearest KB) rather than an exact size due to the switching of the du command
to a more portable form. Instead of sacrificing the exact size, use
configure to help us determine a valid command to acquire our filesize and
place it in the sync database.
Signed-off-by: Dan McGee <dan@archlinux.org>
repo-add didn't handle whitespaces nicely in fields value, and this has hurt
us several times, first with provision version (FS#9171) and then with
optdepends (FS#10630), so it is time to fix it.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
With the "set -e" property set, a failure when sourcing /etc/profile
can cause makepkg to exit without error message. The bash-completion
package activates this bug. Fixes FS#11179.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#11076.
1) quote the url in get_downloadclient
2) only enable nullglob where it is needed
You can see in 7fc306cd41 that nullglob was only enabled for one part, and
that it already caused other problems, which were fixed in 7ff5a917fd.
Thanks to Henning Garus for pointing out that nullglob was problematic with
urls containing expansion char like '?'.
3) change get_downloadcmd which displayed the download command line to
download_file which actually executes the download. It seems nicer that way.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#9486.
source /etc/profile instead of all individual files in /etc/profile.d/*
(which is done by /etc/profile anyway).
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixed FS#9403. With this you can use "makepkg -sr", install the
dependencies, Ctrl+c during the makedepends installation and have
makepkg remove the installed packages on the exit. Previously makepkg
tried to also remove the makedepends which were not installed.
The deplist="" line in remove_deps is due to an obscure bug where local
varaibles from the handle_deps function seem stay in scope because we
never formally exited it.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch introduces a new STRIP_DIRS makepkg.conf option
to change makepkg's search path when stripping binaries.
Original work by: Thomas Bächler <thomas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This method is equivalent with pacman's resolvedeps.
$dep can be any (versioned) dependency.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Using the suggestion from FS#10905, use 'svn info' rather than 'svn log' to
get the current revision number, which is much quicker for large Subversion
repositories. Eventually git will rule the world. :)
Signed-off-by: Dan McGee <dan@archlinux.org>
* change ln -s to ln -sf in the Makefile to prevent a failure when the link
already exists.
* make test_repo_db_file simpler and more natural, move the complexity out
of it.
* remove one $cmd = repo-remove check that wasn't needed
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents dangling symlinks to removed libtool files when
the !libtool option is used.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Removes the remaining $startdir/{src,pkg} usage and adds quoting
around (hopefully) all remaining path variables
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
After the "shopt -s nullglob" change, all regular expressions should be
properly quoted.
This commit only fixes the ones I found, there are probably others left, so
this should be kept in mind for easier future fixing.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Now makepkg can handle filenames with whitespaces in the source array.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
md5sum, sha1sum, etc, do not exist on BSD systems by default. Openssl is a
good portable alternative. This also brings in a dependency for openssl.
Closes FS#10530.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
They shared about 75% of their code, so there is no real reason we should
maintain them separately. Merge the differences accordingly and add a check
based on the basename of the command used to decide what behavior to follow.
Signed-off-by: Dan McGee <dan@archlinux.org>
Linux coreutils provides readlink, and BSD systems tend to have realpath
available. Both commands provide similar functionality but of course have
different names. Add a check for either and use what is available.
While doing this, also unify some of the differences that have cropped up
between repo-add and repo-remove.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch moves the generating of integrity checks to before any
error checking takes place in the PKGBUILD file. This allows integrity
generation to complete when unrelated errors exist in a PKGBUILD file
and allows the removal of multiple checks of the GENINTEG variable that
would otherwise be needed.
In addition a minor fix is made to a comment.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
On BSD systems, as super user, the 'ls' command displays all dot files by
default, causing these to get included when not intended. If we use the bash
glob operator, we can avoid issues with ls on different platforms; however,
we need to turn the nullglob shell option on first to ensure we don't have
problems in empty directories.
Originally-noticed-by: Sebastian Nowicki <sebnow@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This supplements the --source option and does nearly the same thing, except
downloaded source files are included in the archive as well. The sources are
now packages with a pkgname/ prefix.
Original-work-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
makepkg should not abort with error when a user uses the --nobuild option to
extract sources if a package has already been built.
Signed-off-by: Anton Fiuman <llexiw@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a new configure flag, --enable-git-version, that allows the output of
'git describe' to be used in the version string associated with this
package. This could aid in debugging for users that are using a development
version of pacman and we should be able to figure out which cut of code they
are using.
Sample output:
$ pacman --version
Pacman v3.1.4-190-g4cfa-dirty - libalpm v2.3.1
$ makepkg --version
makepkg (pacman) 3.1.4-190-g5861-dirty
Signed-off-by: Dan McGee <dan@archlinux.org>
