We never ended up using or really needing this; kill it for now knowing
it is in git history if ever needed again.
Signed-off-by: Dan McGee <dan@archlinux.org>
This function doesn't exist on OSX. Since there aren't any other
candidates in alpm for which this function would make sense to use,
simply replace the function call with a loop that does the equivalent.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Similar to an earlier commit which accounts for .part files for full
packages, calculate the download_size for deltas keeping mind the
possibility of a partial transfer.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Check for the existance of a partial download of a package file before
jumping to delta calculations. Currently, if there were 10MiB remaining
in a 100MiB the values passed to the front end do not reflect this.
Refactored from an old patch originally by Dan.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
if ~/.netrc exists and has credentials for the hostname requested in a
download, they will be provided in an http auth request. This can still
be overridden by explcitly declaring user:pass in the URL.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This adjusts type usage to match POSIX provided types from
<sys/types.h> rather than assuming everything will fit in a long or
unsigned long. Use fsblkcnt_t (unsigned) and blkcnt_t (signed) as
appropriate. These are affected the same way off_t is on 32 bit
platforms, where the types are extende to 64 bits if large file support
is enabled.
Because most numbers here are block counts, this isn't
near as pressing as using a 32-bit variable for file sizes where
anything over 2GiB can burn you; we likely can support files at least
512 but mainly 4096 times larger.
Signed-off-by: Dan McGee <dan@archlinux.org>
Changes in commit dc3336c277 caused this to stop working as expected for
sync packages, due to the way the logic is structured. Ensure we always
enter the signature code if the bitflag is flipped on to check
signatures for packages. Rename 'use_sig' to 'has_sig' for clarity.
Signed-off-by: Dan McGee <dan@archlinux.org>
This gives us some amount of room to grow in case we ever find another
reason that we might return with an error from the progress callback.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
We lost some of this output in the fetch->curl conversion, but I also
noticed in FS#25852 that we just lack some of this useful information
along the way.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
_alpm_filecache_setup() destroys the list of cachedirs when it finds no
writeable directories in the config. This put us in an awkward situation
where _alpm_filecache_find() would locate a downloaded file in a r/o
cachedir, but then fail to install it after _alpm_filecache_setup() is
called (with a NULL argument). Change this behavior to merely prepend
the temporary directory to the list of available cachedirs.
Dan exposed it in e07547ee4e, as now a package can be found in a
directory we may not be able to actually store packages in.
Reported-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Neither deltas nor filename attributes are ever present in the local
database, so we can remove all of the indirection for accessing these
attributes.
Signed-off-by: Dan McGee <dan@archlinux.org>
Put all the callback stuff in alpm.h in one spot, and make the following
renames for clarity with the new structure:
ALPM_TRANS_EVT_* --> ALPM_EVENT_*
ALPM_TRANS_CONV_* --> ALPM_QUESTION_*
ALPM_TRANS_PROGRESS_* --> ALPM_PROGRESS_*
alpm_option_get_convcb() --> alpm_option_get_questioncb()
alpm_option_set_convcb() --> alpm_option_set_questioncb()
Signed-off-by: Dan McGee <dan@archlinux.org>
This was just disgusting before, unnecessary to limit these to only
usage in a transaction. Still a lot of more room for cleanup but we'll
start by attaching them to the handle rather than the transaction we may
or may not even want to use these callbacks.
Signed-off-by: Dan McGee <dan@archlinux.org>
The call to apply was tucked inside validate, and the EVENT callbacks
were done outside the function rather than inside. Reorganize things a
bit to make more sense.
Signed-off-by: Dan McGee <dan@archlinux.org>
We currently have csize, isize, and size concepts, and sometimes the
difference isn't clear. Ensure the following holds:
* size (aka csize): always the compressed size of the package; available
for everything except local packages (where it will return 0)
* isize: always the installed size of the package; available for all
three package types
Signed-off-by: Dan McGee <dan@archlinux.org>
This upgrades the simple 15/17 scaling by package number we used before
to package sized based scaling, which is much more accurate. Addresses
some of the issues raised in FS#25817.
Signed-off-by: Dan McGee <dan@archlinux.org>
We were using atol(), which on 32 bit, cannot handle values greater than
2GiB, which is fail.
Switch to a strtoull() wrapper function tailored toward parsing off_t
values. This allows parsing of very large positive integer values. off_t
is a signed type, but in our usages, we never parse or have a need for
negative values, so the function will return -1 on error.
Before:
$ pacman -Si flightgear-data | grep Size
Download Size : 2097152.00 K
Installed Size : 2097152.00 K
After:
$ ./src/pacman/pacman -Si flightgear-data | grep Size
Download Size : 2312592.52 KiB
Installed Size : 5402896.00 KiB
Signed-off-by: Dan McGee <dan@archlinux.org>
This reduces from 5 to 3 the number of searches needed on the string
looking for a comparison operator, since we can so a second quick
comparison looking for '=' if we find '<' or '>'. It also makes every
search doable with strchr() or memchr() rather than the slower strstr()
method.
In testing, only 10% of splitdep calls (~1600 / 16000) during an -Ss
database load found a version comparison operator, so optimizing the not
found path to be require less work makes sense.
Signed-off-by: Dan McGee <dan@archlinux.org>
If we fell through to the ALPM_DEP_MOD_ANY case, ptr would be NULL, and
we would pass (0 - <str>), which is a rather large negative number or
bogus positive number, depending on signed/unsigned. Just use strdup in
the case where we don't have a ptr available.
Signed-off-by: Dan McGee <dan@archlinux.org>
Hard to believe there was still more room to improve on this, but I
found an easily correctable oversight tonight. Our databases (both sync
and local) contain many blank lines, and we were not moving onto the
next line right away in these cases; instead we would proceed through
our strcmp() conditional checks as normal.
Some local numbers follow to show the effects of this patch:
Sync `-Ss foobarbaz`:
71,709 blank lines skipped early
~1,505,889 strcmp() calls avoided (21 per line)
~15% speed improvement (.210 --> .179 sec)
Local `-Qs foobarbaz`:
6,823 blank lines skipped early
115,991 strcmp() calls avoided (17 per line)
~6% speed improvement (.080 -> .071 sec)
Signed-off-by: Dan McGee <dan@archlinux.org>
Add new alpm_pkg_get_origin() method, use it in the front end now that
the enum constants are publicly available.
Signed-off-by: Dan McGee <dan@archlinux.org>
libalpm now exports type alpm_pkgfrom_t in alpm.h, which may be used
by frontends.
Pacman now uses alpm_pkgfrom_t instead of replicating that type (pkg_from
as was in src/pacman/package.h)
Updated API change in README.
Signed-off-by: Diogo Sousa <diogogsousa@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
There are many other ways to fail a package load other than "file not
found". We should also use the correct error code in this case. Clean it
up a bit in the various callers.
Signed-off-by: Dan McGee <dan@archlinux.org>
Just pass the entire sync package in if we have it; that way we can do
any necessary operations involving it rather than have a parameter list
growing endlessly.
Signed-off-by: Dan McGee <dan@archlinux.org>
I was trying to take a shortcut and not introduce a wrapper struct for
the signature results, so packed it all into alpm_sigresult_t in the
first iteration. However, this is painful when one wants to add new
fields or only return information regarding a single signature.
Refactor the type into a few components which are exposed to the end
user, and will allow a lot more future flexibility. This also exposes
more information regarding the key to the frontend than was previously
available.
The "private" void *data pointer is used by the library to store the
actual key object returned by gpgme; it is typed this way so the
frontend has no expectations of what is there, and so we don't have any
hard gpgme requirement in our public API.
Signed-off-by: Dan McGee <dan@archlinux.org>
Free "md5sum" if md5_file() fails in alpm_compute_md5sum(). Free
"sha256sum" if sha2_file() fails in alpm_compute_sha256sum().
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
Do all the checks at once; this also avoids the 'return' call after we
have allocated memory for "pkgpath" as well as tweaked the umask.
Signed-off-by: Dan McGee <dan@archlinux.org>
Free "syncpath" and restore umask if we fail to grab a lock.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit 2e7d002315, we use off_t rather than long variables.
Use the _LARGE variants of the methods to indicate we are passing off_t
sized variables, and cast using (curl_off_t) accordingly.
Signed-off-by: Dan McGee <dan@archlinux.org>
There were many cases where the string coming in was a blank line, e.g.
"\n\0", length 1. The trim routine starts by trimming leading spaces,
thus trimming everything. We would then proceed to do a memmove of the
NULL byte, which is completely worthless as we can just assign it
instead.
Signed-off-by: Dan McGee <dan@archlinux.org>
This one wasn't all that necessary as we only used it in one place in
the function, which can be checked easily enough at the call site.
Signed-off-by: Dan McGee <dan@archlinux.org>
This handles the no Content-Length header problem as stated in the
comments of FS#23413. We add a quick check to the callback that will
force an abort if the downloaded data exceeds the payload size, and then
check for this error in the post-download cleanup code.
Signed-off-by: Dan McGee <dan@archlinux.org>
Beautiful of libcurl to use floating point types for what are never
fractional values. We can do better, and we usually want these values in
their integer form anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
Improved alpm_list_mmerge() performance by removing an extra
pass to obtain the tail node.
This was actually suggested by a TODO comment.
Signed-off-by: Diogo Sousa <diogogsousa@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We had this interesting set of facts conundrum, according to vercmp
return values:
2.0a < 2.0
2.0 < 2.0.a
2.0a == 2.0.a
This introduces a code change that ensures '2.0a < 2.0.a' as would be
expected by the first two comparisons. Unfortunately this stays us a bit
further from upstream RPM code, but those are the breaks (in RPM, the
versions involving 'a' do in fact compare the same, but they are both
greater than the bare '2.0').
Signed-off-by: Dan McGee <dan@archlinux.org>
Not sure how or why some of this differed, but it is easy enough to set
it back to how it was so it is easier to diff.
Signed-off-by: Dan McGee <dan@archlinux.org>
This avoids error spam when no servers are configured for a repo and a
sync operation is performed:
Proceed with installation? [Y/n] y
:: Retrieving packages from testing...
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Since we store this directly in the download function, just rework
mask_signal() to take a pointer to a location to store the original.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a precursor to a following patch which will move the setting of
options to a separate function. With the open mode as part of the
struct, we can avoid modifying stack allocated variables.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is more in line with the menagerie of file name members that we now
have on the payload struct.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
These are private to the download operation already, so glob them onto
the struct. This is an ugly rename patch, with the only logical change
being that destfile and tempfile are now freed by the payload_free
function.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This was a vestige leftover from the libfetch days of yore.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
In the case of a non-operation (e.g. DNS resolver error), delete the
leftover 0 byte .part file.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a far more accurate description of what this is, since it's more
than likely not really a filename at all, but the name after a final
slash on a URL.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a refactor and refresh of the code used to find where we should
download packages.
* Incorporate suggestions from FS#25435 to use TMPDIR from the
environment if set, otherwise fall back to /tmp as before.
* Make the writability tests a bit more in depth. We now do a three part
check consisting of:
- S_ISDIR(): is this even a directory
- access(W_OK): is this directory writable by the current user.
Unfortunately for root, this almost always returns that it is, but
in the case of a RO mount or NFS share inaccessible to root, this
check will exclude the directory.
- mode & (any write bit): is there a writable bit set on this
directory. This makes it possible to enforce a read-only cache
directory by setting permissions to 0555, for example.
Signed-off-by: Dan McGee <dan@archlinux.org>
This changes the signature of _alpm_pkg_dup() to return an integer error
code and provide the new package in a passed pointer argument. All
callers are now more robust with checking the return value of this
function to ensure a fatal error did not occur.
We allow load failures to proceed as otherwise we have a chicken and egg
problem- if a 'desc' local database entry is missing, the best way of
restoring said file is `pacman -Sf --dbonly packagename`. This patch
fixes a segfault that was occurring in this case.
Fixes the segfault reported in FS#25667.
Signed-off-by: Dan McGee <dan@archlinux.org>
ftp and http both define >=400 as being "something bad happened"
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Let callers of _alpm_download state whether we should delete on fail,
rather than inferring it from context. We still override this decision
and always unlink when a temp file is used.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
$ pacman -S cronie
resolving dependencies...
looking for inter-conflicts...
:: cronie and fcron are in conflict (@.). Remove fcron? [y/N] n
$ sudo pacman -S pacman
resolving dependencies...
looking for inter-conflicts...
:: pacman and pacman-git are in conflict (pKÈ). Remove pacman-git? [y/N]
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The whole first loop is trying to check literals only, so teach it to do
so. Also, reorder operations to make more sense by putting the strcmp()
first in the literal loop, and using a very cheap name_hash check first
in the second loop.
Signed-off-by: Dan McGee <dan@archlinux.org>
When we switched to using alpm_depcmp() in resolving replacments, we had
some interesting behavior with regard to providers and packages not
found in repositories. Teach the replacement resolving code to not look
at provisions at all to be slightly more sane.
Signed-off-by: Dan McGee <dan@archlinux.org>
This omits the finding of matching provisions and only checks the
package itself against the provided dep.
Signed-off-by: Dan McGee <dan@archlinux.org>
The functions alpm_db_get_name(), alpm_pkg_get_name(), and
alpm_pkg_get_version() are not necessary at all, so remove the calling
and indirection when used in the backend, which makes things slightly
more efficient and reduces code size.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Move is_local standalone field to status enum
* Create VALID/INVALID flag pair
* Create EXISTS/MISSING flag pair
With these additional fields, we can be more intelligent with database
loading and messages to the user. We now only warn once if a sync
database does not exist and do not continue to try to load it once we
have marked it as missing.
The reason for the flags existing in pairs is so the unknown case can be
represented. There should never be a time when both flags in the same
group are true, but if they are both false, it represents the unknown
case. Care is taken to always manipulate both flags at the same time.
Signed-off-by: Dan McGee <dan@archlinux.org>
Use the STRDUP macro instead of strdup() for the sake of better error
handling on memory allocation failures.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
Return with ALPM_ERR_WRONG_ARGS instead of causing a potential segfault
if alpm_fetch_pkgurl() is invoked with a NULL URL.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This moves all the delete-on-fail logic to under cleanup label. This
also implies should_unlink when a payload is received that doesn't allow
resuming.
Fixes .db.sig.part files leftover in the sync dir.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This leverages earlier work that avoids a rename when destfile is unset.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
stat()'s behaviour is undefined if the first argument is NULL and might
be prone to segfault. Add an additional check to skip the stat()
invocation if no destfile is used.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
Avoid a potential segfault that may occur if we use a temporary file and
fail to build the destination file name from the effective URL.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This function is used regardless of whether gpgme support is enabled, so
make sure it is always accessible.
Signed-off-by: Dan McGee <dan@archlinux.org>
This reverts some hacky behavior from 5fc3ec and resets the handle's
pm_errno where it should be reset -- prior to each download. This
prevents a transaction with a download from being aborted when a package
is successfully grabbed from a secondary server.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The precedence goes as follows: signature > sha256sum > md5sum
Add some logic and helper methods to check what we have available when
loading a package, and then only check what is necessary to verify the
package. This should speed up sync database verifies as we no longer
will be doing both a checksum and a signature validation.
Signed-off-by: Dan McGee <dan@archlinux.org>
It would prevent compilation of pacman on FreeBSD, and possibly other
systems.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Previously, the behavior was such that if a sync operation required
packages from multiple repos, a download error in the first repo would
cause a hard repo, ignoring the remainder of the repositories. Change
this behavior so that we do a better job of fetching as many packages as
possible before aborting the transaction.
There's a little bit of refactoring mixed in here to get rid of some
useless variables. Since we now depend heavily on the value of
handle->pm_errno being accurate the determine the function's return
value, we clear it when the transaction state is set.
Fixes FS#25532.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
A partial fix for this was in commit 7de92cb22, but this should fix the
remaining cases. There are still several issues dealing with "provision
as replacement" selection however.
Addresses FS#25538 and FS#25527.
Signed-off-by: Dan McGee <dan@archlinux.org>
We did this with depends way back in commit c244cfecf6 in 2007. We
can do it with these fields as well.
Of note is the inclusion of provides even though only '=' is supported-
we'll parse other things, but no guarantees are given as to behavior,
which is more or less similar to before since we only looked for the
equals sign.
Also of note is the non-inclusion of optdepends; this will likely be
resolved down the road.
The biggest benefactors of this change will be the resolving code that
formerly had to parse and reparse several of these fields; it only
happens once now at load time. This does lead to the disadvantage that
we will now always be parsing this information up front even if we never
need it in the split form, but as these are uncommon fields and our
parser is quite efficient it shouldn't be a big concern.
Signed-off-by: Dan McGee <dan@archlinux.org>
We may end up allocating 1 or 2 extra bytes this way, but it is worth it
to simplify the method and not have to call base64_decode() a second
time. Use the hueristic that base64 encoding produces 3 bytes of decoded
data for every 4 bytes of encoded data.
Signed-off-by: Dan McGee <dan@archlinux.org>
These items are never present in anything but sync databases, nor do we
even try to load them from the local database. Remvoe the indirection
meant to allow the caching layer to work since it will never do anything
anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents iteration through the remainder of the current tree, with
pacman claiming that they're all replacements to the original
replacement candidate.
:: Synchronizing package databases...
allanbrokeit is up to date
testing is up to date
core is up to date
extra is up to date
community-testing is up to date
community is up to date
:: Starting full system upgrade...
:: Replace util-linux-git with core/util-linux? [Y/n] n
:: Replace util-linux-git with core/vi? [Y/n] n
:: Replace util-linux-git with core/vpnc? [Y/n] n
:: Replace util-linux-git with core/wget? [Y/n] n
:: Replace util-linux-git with core/which? [Y/n] n
:: Replace util-linux-git with core/wireless-regdb? [Y/n] n
:: Replace util-linux-git with core/wireless_tools? [Y/n] n
:: Replace util-linux-git with core/wpa_actiond? [Y/n] n
:: Replace util-linux-git with core/wpa_supplicant? [Y/n] n
:: Replace util-linux-git with core/xfsprogs? [Y/n] n
:: Replace util-linux-git with core/xinetd? [Y/n] n
:: Replace util-linux-git with core/xz? [Y/n] n
:: Replace util-linux-git with core/zd1211-firmware? [Y/n] n
:: Replace util-linux-git with core/zlib? [Y/n] n
there is nothing to do
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds a field in the package struct for this checksum type as well
as allowing access via the API to it. The frontend is now able to
display any read value. Note that this does not implement any use or
verification of the value internally.
Signed-off-by: Dan McGee <dan@archlinux.org>
adds a new API method: alpm_pkg_get_base64_sig
[Dan: don't use a new header string in frontend]
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Take this opportunity to refactor the if/then/else logic into a
switch/case which is likely going to be needed to fine tune more
exceptions in the future.
Fixes FS#25531
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This closely matches what we had before for -R --recursive. Basically,
when specifying a target (e.g., pacman), we can now recursively pull all
dependencies, regardless of version specifiers and whether they are
already satisfied in the local database. This could be used to update
pacman on a system with an old glibc, for example, as both pacman and
glibc would get pulled into the transaction.
This is most useful with --needed to prevent needless reinstalls as
described in the man page changes.
The end goal of this change is to wire it into SyncFirst and have it be
the default mode of operation there, but that belongs in a separate
changeset.
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents possible null dereferences in FTP transfers when the
progress callback is touched during connection teardown.
http://curl.haxx.se/mail/lib-2011-08/0128.html
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is done extremely crudely and is not very efficient, but it does
push us down the path of being closer to right, as one additional test
now passes.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Add *_hash fields to conflict struct and populate them
* Remove unnecessary backwards string comparisons
Signed-off-by: Dan McGee <dan@archlinux.org>
This also pulls in some early translations we had entered in Transifex
in the last day so those would not be lost. The diffstat is huge and not
very telling as usual, as all sorts of fuzzyness switches happened this
time around for some reason.
Signed-off-by: Dan McGee <dan@archlinux.org>
If the string was zero-length to begin with, or consists of only newline
characters, nothing stopped us from incrementing right off the front of
the string. Ensure len stays above zero the whole time.
Signed-off-by: Dan McGee <dan@archlinux.org>
Noticed in my PowerPC Linux VM:
cc1: warnings being treated as errors
dload.c:45: error: 'get_filename' defined but not used
make[3]: *** [dload.lo] Error 1
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a fairly valid assumption at this point, or at least as good of
one as assuming packages all have names.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a bit of a mess, due to the fact that we have a progress meter
running. It is also ironic that we are in the midst of a method named
"commit" when we haven't done a damn thing yet, and can still fail hard
if either a checksum or signature is invalid or unrecognized.
Adapt the former test_md5sum method to be invoked for any of the various
failure types, which at least gives the user some indication of what
packages are failing. A second patch will be needed to actually show
worthwhile error codes, but this is going to involve modifying the
actual data passed with the callback.
Signed-off-by: Dan McGee <dan@archlinux.org>
This moves us toward staring translations for the 4.0.0 release,
although this should not be interpreted as a string freeze by any means.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is standard procedure elsewhere and cuts down on translations that
won't be seen (and we don't want if we need English debug output
anyway).
Signed-off-by: Dan McGee <dan@archlinux.org>
If we are missing a local database file, we get repeated messages over
and over telling us the same thing, rather than being sane and erroring
only once. This package adds an INFRQ_ERROR level that is added to the
mask if we encounter any errors on a local_db_read() operation, and
short circuits future calls if found in the value. This fixes FS#25313.
Note that this does not make any behavior changes other than suppressing
error messages and repeated code calls to failure cases; we still have
more to do in the "local database is hosed" department.
Also make a small update to the wrong but unused flags set in
be_package; using INFRQ_ALL there was not totally correct.
Signed-off-by: Dan McGee <dan@archlinux.org>
We did a good job checking this in add.c, but not necessarily anywhere
else. Fix this up by adding checks into dload.c, remove.c, and conf.c in
the frontend. Also add loggers where appropriate and make the message
syntax more consistent.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't write with extra or unknown whitespace, so there is little
reason for us to trim it when reading either. This also fixes the
hopefully never encountered "paths that start or end with spaces" issue,
for which two pactests have been added. The tests also contain other
evil characters that we have encountered before and handle just fine,
but it doesn't hurt to ensure we don't break such support in the future.
Signed-off-by: Dan McGee <dan@archlinux.org>
This ensures we are actually making correct use of the information gpgme
is returning to us. Marginal being allowed was obvious before, but
Unknown should deal with trust level, and not the presence or lack
thereof of a public key to validate the signature with.
Return status and validity information in two separate values so check
methods and the frontend can use them independently. For now, we treat
expired keys as valid, while expired signatures are invalid.
Signed-off-by: Dan McGee <dan@archlinux.org>
Immediately jump to the cleanup code after setting the return code to -1
in case rename() fails. Otherwise, it will be reset to 0 right after we
leave the if branch.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This accomplishes quite a few things with one rather invasive change.
1. Iteration is much more performant, due to a reduction in pointer
chasing and linear item access.
2. Data structures are smaller- we no longer have the overhead of the
linked list as the file struts are now laid out consecutively in
memory.
3. Memory allocation has been massively reworked. Before, we would
allocate three different pieces of memory per file item- the list
struct, the file struct, and the copied filename. What this resulted
in was massive fragmentation of memory when loading filelists since
the memory allocator had to leave holes all over the place. The new
situation here now removes the need for any list item allocation;
allocates the file structs in contiguous memory (and reallocs as
necessary), leaving only the strings as individually allocated. Tests
using valgrind (massif) show some pretty significant memory
reductions on the worst case `pacman -Ql > /dev/null` (366387 files
on my machine):
Before:
Peak heap: 54,416,024 B
Useful heap: 36,840,692 B
Extra heap: 17,575,332 B
After:
Peak heap: 38,004,352 B
Useful heap: 28,101,347 B
Extra heap: 9,903,005 B
Several small helper methods have been introduced, including a list to
array conversion helper as well as a filelist merge sort that works
directly on arrays.
Signed-off-by: Dan McGee <dan@archlinux.org>
As noted by Allan, we failed pretty hard if gpgme was compiled out. With
these changes, only sign001.py fails. This can/will be fixed later once
we beef up the test suite with more signing tests anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
If we can't read the keyring, gpgme will output confusing debug
information and fail to verify the signature, so we should log some
debug information.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a wrapper function for access() which logs some debug
information and eases handling in case of split directory and filename.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses FS#25141. We shouldn't remove every empty directory we
come across during the removal process unless it is truly not known to
any other package. This will prevent removal of essential directories
such as '/var/lock/'.
This is accomplished by first checking the empty/non-empty status of a
directory, which was previously done implicitly by calling rmdir() and
ignoring errors. We do this to avoid the next (new) check in most cases,
which is to look at all local packages to see if the to-be-removed
directory is present in another packages' filelist. If we do not find it
anywhere, then we remove it, else we keep the file around.
The pactest has been updated to test more cases, as well as finding a
flaw in the original expected to fail case- we need separate DIR and
FILE based EXIST rules.
Signed-off-by: Dan McGee <dan@archlinux.org>
This can only ever operate on the local database, and a local package at
that. Change the function signature to take a handle and package object,
add the relevant asserts, and ensure the frontend can detect the package
not found condition when finding packages to pass to this method.
Signed-off-by: Dan McGee <dan@archlinux.org>
The bulk of this commit is adding new tests to ensure the new behavior
works without disrupting old behavior. This is a relatively sane maneuver
when a package adds a conf file (e.g. '/etc/mercurial/hgrc') that was
not previously in the package, but it is placed in the backup array. In
essence, we can treat the existing file as having always been a part of
the package and do our normal compare/install as pacnew logic checks.
Signed-off-by: Dan McGee <dan@archlinux.org>
This code duplication has always been a rather clumsy casuality of
fixing some past upgrade issues. Unify the removal code across upgrade
and remove operations into a new _alpm_remove_single_package() method
wihch makes it very clear how we handle upgrade and remove differently,
via several conditionals on newpkg.
This commit highlights interesting behavior such as the fact that the
implicit removal in every package upgrade never gets transaction events
or progress callbacks.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes "error: no previous prototype for '_alpm_raw_cmp'
[-Werror=missing-prototypes]" warnings, and also prevents someone from
getting the prototypes and functions out of sync.
Signed-off-by: Dan McGee <dan@archlinux.org>
Restore some sanity to the number of arguments passed to _alpm_download
and curl_download_internal.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This means creating a new struct which can pass more descriptive data
from the back end sync functions to the downloader. In particular, we're
interested in the download size read from the sync DB. When the remote
server reports a size larger than this (via a content-length header),
abort the transfer.
In cases where the size is unknown, we set a hard upper limit of:
* 25MiB for a sync DB
* 16KiB for a signature
For reference, 25MiB is more than twice the size of all of the current
binary repos (with files) combined, and 16KiB is a truly gargantuan
signature.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
URLs might end with a slash and follow redirects, or could be a
generated by a script such as /getpkg.php?id=12345. In both cases, we
may have a better filename that we can write to, taken from either
content-disposition header, or the effective URL.
Specific to the first case, we write to a temporary file of the format
'alpmtmp.XXXXXX', where XXXXXX is randomized by mkstemp(3). Since this
is a randomly generated file, we cannot support resuming and the file is
unlinked in the event of an interrupt.
We also run into the possibility of changing out the filename from under
alpm on a -U operation, so callers of _alpm_download can optionally pass
a pointer to a *char to be filled in by curl_download_internal with the
actual filename we wrote to. Any sync operation will pass a NULL pointer
here, as we rely on specific names for packages from a mirror.
Fixes FS#22645.
Signed-off-by: Dave Reisner <d@falconindy.com>
The supposed safety blanket of this function is better handled by
explicit length checking and usages of strlen() on known NULL-terminated
strings rather than hoping things fit in a buffer. We also have no need
to fully fill a PATH_MAX length variable with NULLs every time as long
as a single terminating byte is there. Remove usages of it by using
strcpy() or memcpy() as appropriate, after doing length checks via
strlen().
Signed-off-by: Dan McGee <dan@archlinux.org>
We can readily detect the first node in a list by checking if
node->prev->next is NULL. So there is no need to pass the head
of the list to this function and its prototype now looks like
all the other item accessors.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The only thing this accessor did was remove the const qualifier
given our entire list implementation requires passing around the
head anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
They are placeholders, but important for things like trying to re-sync a
database missing a signature. By using the alpm_db_validity() method at
the right time, a client can take the appropriate action with these
invalid databases as necessary.
In pacman's case, we disallow just about anything that involves looking
at a sync database outside of an '-Sy' operation (although we do check
the validity immediately after). A few operations are still permitted-
'-Q' ops that don't touch sync databases as well as '-R'.
Signed-off-by: Dan McGee <dan@archlinux.org>
