There were a few issues with this code:
1. We already had an open fd to a file, but never used it to our benefit.
Use the libarchive convienence method to write the current file contents
straight to a file descriptor.
2. The real problem cropped up on Windows where the locking semantics caused
the old way of extraction to fail because we had an open file descriptor.
By using the file descriptor and closing it ASAP, we prevent these
failures.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove a few functions and things that were unnecessary, update the help
line calls to the current function name, and make the small change to
pacman.c for the signal handler return type that is defined in config.h.
Signed-off-by: Dan McGee <dan@archlinux.org>
We use this function once in our codebase, but fortunately the workaround is
relatively easy. swprintf() is not available on Cygwin so the compile failed
there, but we can do a series of mbstowcs() calls that produce the same end
result as the swprintf() call.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a new --disable-internal-download flag to configure allowing the
internal download code to be skipped. This will be helpful on platforms that
currently don't support either libdownload or libfetch (such as Cygwin) and
for just compiling a lighter weight pacman binary.
This was made really easy by our recent refactoring of the download code
into separate internal and external functions, as well as some error code
cleanup.
Signed-off-by: Dan McGee <dan@archlinux.org>
If we specify -q/--quiet on an --owns operation, only print a matching
package name rather than the verbose human-readable message.
Signed-off-by: Dan McGee <dan@archlinux.org>
From 41cc28f560bf9843d81ce5fb62b884b6325d06a0 Mon Sep 17 00:00:00 2001
From: Allan McRae <mcrae_allan@hotmail.com>
Date: Sun, 6 Apr 2008 22:18:06 +1000
Subject: [PATCH] Quote filenames in find expression in pacdiff
Small patch to allow pacdiff to run in /etc. See FS#10090.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Also fix a broken contrib/ Makefile, found with make distcheck. I also let
the little translation linebreak update slip in here as it was small enough
not to be a big deal, and this should just prevent it from happening again
later anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
We correctly closed the logfile stream when recalling set_logfile, but did
not NULL out the dead pointer once we did this. Fix the problem which was
the cause of FS#10056.
Signed-off-by: Dan McGee <dan@archlinux.org>
This update causes query003 to fail before commit
4b8ada818e. Hopefully the issue doesn't crop
up again but we might as well test for it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Not too complicated of a fix, but just adds some code to loop over the
entire group list and space it out.
Signed-off-by: Dan McGee <dan@archlinux.org>
This segfault creeped in as a result of commit bf867003. We were incorrectly
assuming the group member of our package was a pmgrp_t list when in fact it
is just a string list, which caused a segfault on any -Qs operation.
Also slightly cleanup the -Ss code (which was originally correct unlike the
-Qs code).
Signed-off-by: Dan McGee <dan@archlinux.org>
After the libarchive upgrade from 2.4.12 to 2.4.14, our usage of
archive_entry_pathname became dangerous. We were using the result of that
function even after calls to archive_entry_set_pathname.
With 2.4.14, the entryname becomes wrong after these calls, and so all the
future use of entryname are bogus. entryname is used quite a lot for
logging, so that's not so bad. But it's also used for the backup handling,
so that's not very cool. For example, reinstalling a package with backup
entries will erase all the md5 entries from the DB, because they won't be
found back.
entryname is now a static string so that we can easily keep the result of
archive_entry_pathname.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: fixed version numbers in commit message]
Signed-off-by: Dan McGee <dan@archlinux.org>
This should be a notable speed-up (apart from kernel cache).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
With the addition of the archive_fgets() function, we can now skip the temp
file usage in pkg_load/parse_descfile that was not needed. This has a nice
benefit of probably being both faster, reducing code, and getting rid of
"expensive" file operations.
Signed-off-by: Dan McGee <dan@archlinux.org>
This crude function allows reading from an archive on a line-by-line basis
similar to the familiar fgets() call on a FILE stream. This is the first
step in being able to read DB entries straight from an archive.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch should avoid duplicated target names in the backend.
1. sync_loadtarget will return with PM_ERR_TRANS_DUP_TARGET when trying to
add a duplicated target
2. sysupgrade never pulls duplicated targets
3. resolvedeps won't pull duplicated targets anymore
A pulled list was introduced in sync_prepare to improve the
pmsyncpkg_t<->pmpkg_t list conversion by making it more direct.
Also replace sync1005 and sync1006 by the sync1008 pactest, which is
similar but more interesting (the provisions are dependencies instead of
explicit targets).
sync1005 didn't work as expected anyway. It was expecting that pacman
failed, and pacman indeed failed, but not for the good reason. It didn't
fail during the preparation step because of conflicting targets, but during
the commit step, because of a md5 error...
And sync1006 didn't pass and was not really worth fixing. We have already
enough failing pactests more important than these two.
sync1008 pass with this patch.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
In the file:// download case, we didn't free the return from get_destfile()
after we were done with it. Fix it. (Found with xfercommand001.py)
Signed-off-by: Dan McGee <dan@archlinux.org>
The _alpm_backup_split function always alloced memory for the fname, and we
let it disappear in a specific case (upgrade026.py). Fix the issue.
Signed-off-by: Dan McGee <dan@archlinux.org>
This gets rid of a lot of the unnecessary verbosity in the --valgrind output
when running all the tests. It should also make diff-ing output between test
runs a lot easier.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will reduce the need for running an -Syy if the DB was only
half-extracted, as the mtime won't get updated until the new database is
completely in place.
Signed-off-by: Dan McGee <dan@archlinux.org>
As it was already mentioned several times, the new -Sc behavior in 3.1 is
great, but only when the package cache is not shared.
This option has two possible values : KeepInstalled and KeepCurrent
With KeepCurrent, -Sc will clean packages that are no longer available in
any sync db, rather than packages that are no longer in the local db. The
resulting behavior should be better for shared cache.
Ref :
http://www.archlinux.org/pipermail/pacman-dev/2008-February/011140.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
in PKGBUILD.proto, we have the following line
md5sums=() #generate with 'makepkg -g'
if we add a md5sum inside quotes, or even just the quotes :
md5sums=('') #generate with 'makepkg -g'
the highlighting will be totally messed up.
Adding the keepend keyword fixes this.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
These case insensitive comparisons didn't work in some locales, like tr_TR
where upper(i) != I. So a second case sensitive comparison had to be made
for each directive.
Only keeping case sensitive comparisons make the code cleaner and treat all
locales equally.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011445.html
Also fix pactests to use the correct case.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
All other steps in tidy_install function were already controlled by an
option in makepkg.conf, so this patch adds an option for the man page
compression step too.
This will allow to keep man pages uncompressed, which is required for some
special meta man page, like the zshall one (see FS#4580).
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011472.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
* -Rss removes all dependencies (including explicitly installed ones).
* updated documentation
* two pactest files added to test the difference between -Rs and -Rss
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
If we had :
arch=(fake)
The fake string would be highlighted because it's invalid.
But if we had :
arch=('fake')
it didn't work.
Fix this for both arch and license arrays.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Its implementation was quite broken:
* add_loadtarget() might have silently filtered out some targets when
replacing an older version.
* This was used in sync.c to determine whether a target is implicit or not,
which is incorrect behavior. Before this patch we silently removed user
confirmed replacements; now we always warn on a replacement.
* remove001.py behavior was quite odd in adding same target 5 times to the
target list, we can change this behavior to be a failure.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xav: changed remove001 pactest accordingly]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: rewrote commit message]
Signed-off-by: Dan McGee <dan@archlinux.org>
Download to *.part and remove the suffix if successful, thus md5sums will be
checked only for complete files, and next time makepkg will resume
downloading of partial file instead of complaining about invalid md5sums.
Old DLAGENTS format is still supported.
Late fix: Do not try to download %u first
The output of grep was not suppressed, thus the output of get_downloadcmd
was wrong because of extra line at the beginning that contained an
unsubstituted (with %o and %u) entry from DLAGENTS.
Signed-off-by: Roman Kyrylych <roman@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
