mirror of
https://github.com/NathanReeves/BlueCubeMod
synced 2024-11-28 20:12:20 -05:00
43 lines
1.1 KiB
Markdown
43 lines
1.1 KiB
Markdown
|
# BlueCubeMod
|
|||
|
|
|
|||
|
|
ESP32 based GameCube Controller Bluetooth conversion for Nintendo Switch
|
|||
|
|
|
|||
|
|
v1:
|
|||
|
|
Mac/PC/PS4 supported (tested using Dolphin Emulator on Mac)
|
|||
|
|
|
|||
|
|
For Switch/RaspberryPi, use an 8Bitdo USB adapter
|
|||
|
|
|
|||
|
|
v2:
|
|||
|
|
Switch support only - no adapter required
|
|||
|
|
|
|||
|
|
## Wiring:
|
|||
|
|
|
|||
|
|
- Connect pins 23 and 18 to GameCube controller's data pin (Red)
|
|||
|
|
|
|||
|
|
- Connect GND to controller's ground pin (Black)
|
|||
|
|
|
|||
|
|
## Build instructions(v2):
|
|||
|
|
|
|||
|
|
- Use this esp-idf fork here: https://github.com/NathanReeves/esp-idf
|
|||
|
|
|
|||
|
|
- Set up the esp-idf environment: https://docs.espressif.com/projects/esp-idf/en/latest/get-started/
|
|||
|
|
|
|||
|
|
- Get the BlueCubeModv2 firmware
|
|||
|
|
|
|||
|
|
- If you haven’t flashed an ESP32 project before, you need the port name of ESP32 for the config file. If using unix system, to get the port name of a USB device run:
|
|||
|
|
|
|||
|
|
`ls /dev`
|
|||
|
|
|
|||
|
|
- Find your device on the list and copy it. It should look something like: /dev/cu.usbserial-DO01EXOV or /dev/cu.SLAB_USBtoUART
|
|||
|
|
|
|||
|
|
- cd into project folder and run:
|
|||
|
|
|
|||
|
|
`make menuconfig`
|
|||
|
|
|
|||
|
|
- Paste your port name into Serial Flasher Config -> Default Serial Port
|
|||
|
|
|
|||
|
|
- Compile and flash the program, run:
|
|||
|
|
|
|||
|
|
`make flash monitor`
|
|||
|
|
|