| .. | ||
| main | ||
| Makefile | ||
| README.md | ||
| sdkconfig | ||
BlueCubeMod
ESP32 based GameCube Controller Bluetooth conversion for Nintendo Switch
v1: Mac/PC/PS4 supported (tested using Dolphin Emulator on Mac)
For Switch/RaspberryPi, use an 8Bitdo USB adapter
v2: Switch support only - no adapter required
Wiring:
-
Connect pins 23 and 18 to GameCube controller's data pin (Red)
-
Connect GND to controller's ground pin (Black)
Build instructions(v2):
-
Use this esp-idf fork here: https://github.com/NathanReeves/esp-idf
-
Set up the esp-idf environment: https://docs.espressif.com/projects/esp-idf/en/latest/get-started/
-
Get the BlueCubeModv2 firmware
-
If you haven’t flashed an ESP32 project before, you need the port name of ESP32 for the config file. If using unix system, to get the port name of a USB device run:
ls /dev
-
Find your device on the list and copy it. It should look something like: /dev/cu.usbserial-DO01EXOV or /dev/cu.SLAB_USBtoUART
-
cd into project folder and run:
make menuconfig
-
Paste your port name into Serial Flasher Config -> Default Serial Port
-
Compile and flash the program, run:
make flash monitor