1
0
mirror of https://github.com/NathanReeves/BlueCubeMod synced 2024-08-13 16:53:51 -04:00
Go to file
Nathan Reeves cc2aa07256
Merge pull request #6 from MangaValk/master
fixed v2 firmware to work using latest esp_idf
2022-08-19 09:36:49 -06:00
Firmware fixed v2 firmware to work using latest esp_idf 2021-11-27 15:02:43 +01:00
Modding Resources updated readme 2020-02-21 10:46:52 -07:00
PCB Added v2 firmware w/ switch support 2020-02-01 00:35:36 -07:00
.gitignore fixed v2 firmware to work using latest esp_idf 2021-11-27 15:02:43 +01:00
LICENSE add license 2020-06-26 09:31:59 -06:00
README.md Update README.md 2020-02-21 11:05:28 -07:00

BlueCubeMod

ESP32 based GameCube Controller Bluetooth conversion for Nintendo Switch

v1: Mac/PC/PS4 supported (tested using Dolphin Emulator on Mac, for Switch/RaspberryPi, use an 8Bitdo USB adapter)

v2: Switch support only - no adapter required

Wiring:

  • Connect pins 23 and 18 to GameCube controller's data pin (Red)

  • Connect GND to controller's ground pin (Black)

alt text

alt text

Build instructions(v2):

ls /dev

  • Find your device on the list and copy it. It should look something like: /dev/cu.usbserial-DO01EXOV or /dev/cu.SLAB_USBtoUART

  • cd into project folder and run:

make menuconfig

  • Paste your port name into Serial Flasher Config -> Default Serial Port

  • Compile and flash the program, run:

make flash monitor

Resources used:

http://www.int03.co.uk/crema/hardware/gamecube/gc-control.htm

https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering

https://github.com/timmeh87/switchnotes

Thank you to @Molorius for implementing the bluedroid Classic stack for esp