progress dialog working
The ellipses cause errors, so they were removed. I was on the right track with the associate array, but it would previously execute the commands out of order. Following directions from the URL in the comments, I made another array that helps keep the array in the order.
This commit is contained in:
Jacob Salmela
dschaper
parent
4229a3e5e9
commit
dfe1b126c4
|
|
@ -33,7 +33,7 @@ IPv6addr=$(ip addr show | awk '/scope\ global/ && /ff:fe/ {print $2}' | cut -d'/
|
||||||
backupLegacyPihole()
|
backupLegacyPihole()
|
||||||
{
|
{
|
||||||
if [[ -f /etc/dnsmasq.d/adList.conf ]];then
|
if [[ -f /etc/dnsmasq.d/adList.conf ]];then
|
||||||
echo "Original Pi-hole detected. Initiating sub space transport..."
|
echo "Original Pi-hole detected. Initiating sub space transport"
|
||||||
sudo mkdir -p /etc/pihole/original/
|
sudo mkdir -p /etc/pihole/original/
|
||||||
sudo mv /etc/dnsmasq.d/adList.conf /etc/pihole/original/adList.conf.$(date "+%Y-%m-%d")
|
sudo mv /etc/dnsmasq.d/adList.conf /etc/pihole/original/adList.conf.$(date "+%Y-%m-%d")
|
||||||
sudo mv /etc/dnsmasq.conf /etc/pihole/original/dnsmasq.conf.$(date "+%Y-%m-%d")
|
sudo mv /etc/dnsmasq.conf /etc/pihole/original/dnsmasq.conf.$(date "+%Y-%m-%d")
|
||||||
|
|
@ -51,10 +51,10 @@ fi
|
||||||
backupLegacyPihole
|
backupLegacyPihole
|
||||||
|
|
||||||
# Display the welcome dialog
|
# Display the welcome dialog
|
||||||
whiptail --msgbox --backtitle "Welcome..." --title "Pi-hole automated installer" "This installer will transform your Raspberry Pi into a network-wide ad blocker!" $r $c
|
whiptail --msgbox --backtitle "Welcome" --title "Pi-hole automated installer" "This installer will transform your Raspberry Pi into a network-wide ad blocker!" $r $c
|
||||||
|
|
||||||
# Explain the need for a static address
|
# Explain the need for a static address
|
||||||
whiptail --msgbox --backtitle "Initating network interface..." --title "Static IP Needed" "The Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.
|
whiptail --msgbox --backtitle "Initating network interface" --title "Static IP Needed" "The Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.
|
||||||
|
|
||||||
In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." $r $c
|
In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." $r $c
|
||||||
|
|
||||||
|
|
@ -65,7 +65,7 @@ if (whiptail --title "Static IP Address" --yesno "Do you want to use your curren
|
||||||
Subnet mask: $IPv4mask
|
Subnet mask: $IPv4mask
|
||||||
Gateway: $IPv4gw" $r $c) then
|
Gateway: $IPv4gw" $r $c) then
|
||||||
# If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict.
|
# If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict.
|
||||||
whiptail --msgbox --backtitle "IP information..." --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict. But in most cases the router is smart enough to not do that.
|
whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict. But in most cases the router is smart enough to not do that.
|
||||||
|
|
||||||
If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
|
If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
|
||||||
|
|
||||||
|
|
@ -78,15 +78,15 @@ else
|
||||||
until [[ $ipSettingsCorrect = True ]]
|
until [[ $ipSettingsCorrect = True ]]
|
||||||
do
|
do
|
||||||
# Ask for the IPv4 address
|
# Ask for the IPv4 address
|
||||||
IPv4addr=$(whiptail --backtitle "Calibrating network interface..." --title "IPv4 address" --inputbox "Enter your desired IPv4 address" $r $c $IPv4addr 3>&1 1>&2 2>&3)
|
IPv4addr=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" $r $c $IPv4addr 3>&1 1>&2 2>&3)
|
||||||
if [[ $? = 0 ]];then
|
if [[ $? = 0 ]];then
|
||||||
echo "Your static IPv4 address: $IPv4addr"
|
echo "Your static IPv4 address: $IPv4addr"
|
||||||
# Ask for the subnet mask
|
# Ask for the subnet mask
|
||||||
IPv4mask=$(whiptail --backtitle "Calibrating network interface..." --title "IPv4 netmask" --inputbox "Enter your desired IPv4 subnet mask" $r $c $IPv4mask 3>&1 1>&2 2>&3)
|
IPv4mask=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 netmask" --inputbox "Enter your desired IPv4 subnet mask" $r $c $IPv4mask 3>&1 1>&2 2>&3)
|
||||||
if [[ $? = 0 ]];then
|
if [[ $? = 0 ]];then
|
||||||
echo "Your static IPv4 netmask: $IPv4mask"
|
echo "Your static IPv4 netmask: $IPv4mask"
|
||||||
# Ask for the gateway
|
# Ask for the gateway
|
||||||
IPv4gw=$(whiptail --backtitle "Calibrating network interface..." --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" $r $c $IPv4gw 3>&1 1>&2 2>&3)
|
IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" $r $c $IPv4gw 3>&1 1>&2 2>&3)
|
||||||
if [[ $? = 0 ]];then
|
if [[ $? = 0 ]];then
|
||||||
echo "Your static IPv4 gateway: $IPv4gw"
|
echo "Your static IPv4 gateway: $IPv4gw"
|
||||||
# Give the user a chance to review their settings before moving on
|
# Give the user a chance to review their settings before moving on
|
||||||
|
|
@ -127,50 +127,52 @@ else
|
||||||
fi
|
fi
|
||||||
|
|
||||||
# These are the commands to actually install the Pi-hole
|
# These are the commands to actually install the Pi-hole
|
||||||
# Create an associative array so we can display text to the user but run the associated command in the background.
|
# This is pretty ugly, but it works to present a nice front-end
|
||||||
declare -A cmdsAndEchoes=([sudo apt-get update]='Updating...'
|
# http://stackoverflow.com/questions/29161323/how-to-keep-associative-array-order-in-bash
|
||||||
[sudo apt-get -y upgrade]='Upgrading...'
|
# Maybe it would be better to just show the command output instead of the progress bar
|
||||||
[sudo apt-get -y install dnsutils bc toilet]='Installing chronomoter tools...'
|
declare -A commands; declare -a echoes;
|
||||||
[sudo apt-get -y install dnsmasq]='Installing a DNS server...'
|
commands["Updating"]="sudo apt-get update"; echoes+=( "Updating" )
|
||||||
[sudo apt-get -y install lighttpd php5-common php5-cgi php5]='Instaling a Web server and PHP...'
|
commands["Upgrading"]="sudo apt-get -y upgrade"; echoes+=( "Upgrading" )
|
||||||
[sudo mkdir /var/www/html]='Making an HTML folder...'
|
commands["Installing chronomoter tools"]="sudo apt-get -y install dnsutils bc toilet"; echoes+=( "Installing chronomoter tools" )
|
||||||
[sudo chown www-data:www-data /var/www/html]='Setting permissions for the Web server...'
|
commands["Installing a DNS server"]="sudo apt-get -y install dnsmasq"; echoes+=( "Installing a DNS server" )
|
||||||
[sudo chmod 775 /var/www/html]='Setting permissions for the Web server...'
|
commands["Instaling a Web server and PHP"]="sudo apt-get -y install lighttpd php5-common php5-cgi php5"; echoes+=( "Instaling a Web server and PHP" )
|
||||||
[sudo usermod -a -G www-data pi]='Setting permissions for the Web server...'
|
commands["Making an HTML folder"]="sudo mkdir /var/www/html"; echoes+=( "Making an HTML folder" )
|
||||||
[sudo service dnsmasq stop]='Stopping dnsmasq to modify it...'
|
commands["chowning the Web server"]="sudo chown www-data:www-data /var/www/html"; echoes+=( "chowning the Web server" )
|
||||||
[sudo service lighttpd stop]='Stopping lighttpd to modify it...'
|
commands["chmodding the Web server"]="sudo chmod 775 /var/www/html"; echoes+=( "chmodding the Web server" )
|
||||||
[sudo mv /etc/dnsmasq.conf /etc/dnsmasq.conf.orig]='Backing up the dnsmasq config file...'
|
commands["Giving pi access to the Web server"]="sudo usermod -a -G www-data pi"; echoes+=( "Giving pi access to the Web server" )
|
||||||
[sudo mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.orig]='Backing up the lighttpd config file...'
|
commands["Stopping dnsmasq to modify it"]="sudo service dnsmasq stop"; echoes+=( "Stopping dnsmasq to modify it" )
|
||||||
[sudo mv /var/www/html/index.lighttpd.html /var/www/html/index.lighttpd.orig]='Backing up the default Web page...'
|
commands["Stopping lighttpd to modify it"]="sudo service lighttpd stop"; echoes+=( "Stopping lighttpd to modify it" )
|
||||||
[sudo curl -o /etc/dnsmasq.conf https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/dnsmasq.conf]='Installing the dnsmasq config file...'
|
commands["Backing up the dnsmasq config file"]="sudo mv /etc/dnsmasq.conf /etc/dnsmasq.conf.orig"; echoes+=( "Backing up the dnsmasq config file" )
|
||||||
[sudo curl -o /etc/lighttpd/lighttpd.conf https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/lighttpd.conf]='Installing the lighttpd config file...'
|
commands["Backing up the lighttpd config file"]="sudo mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.orig"; echoes+=( "Backing up the lighttpd config file" )
|
||||||
[sudo lighty-enable-mod fastcgi fastcgi-php]='Enabling PHP...'
|
commands["Backing up the default Web page"]="sudo mv /var/www/html/index.lighttpd.html /var/www/html/index.lighttpd.orig"; echoes+=( "Backing up the default Web page" )
|
||||||
[sudo mkdir /var/www/html/pihole]='Making a directory for the Web interface...'
|
commands["Installing the dnsmasq config file"]="sudo curl -o /etc/dnsmasq.conf https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/dnsmasq.conf"; echoes+=( "Installing the dnsmasq config file" )
|
||||||
[sudo curl -o /var/www/html/pihole/index.html https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/index.html]='Installing a blank HTML page to take place of ads...'
|
commands["Installing the lighttpd config file"]="sudo curl -o /etc/lighttpd/lighttpd.conf https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/lighttpd.conf"; echoes+=( "Installing the lighttpd config file" )
|
||||||
[sudo wget https://github.com/jacobsalmela/AdminLTE/archive/master.zip -O /var/www/master.zip]='Downloading the Pi-hole dashboard...'
|
commands["Enabling PHP"]="sudo lighty-enable-mod fastcgi fastcgi-php"; echoes+=( "Enabling PHP" )
|
||||||
[sudo unzip /var/www/master.zip -d /var/www/html/]='Unpacking the dashboard...'
|
commands["Making a directory for the Web interface"]="sudo mkdir /var/www/html/pihole"; echoes+=( "Making a directory for the Web interface" )
|
||||||
[sudo mv /var/www/html/AdminLTE-master /var/www/html/admin]='Renaming the dashboard...'
|
commands["Installing a blank HTML page to take place of ads"]="sudo curl -o /var/www/html/pihole/index.html https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/index.html"; echoes+=( "Installing a blank HTML page to take place of ads" )
|
||||||
[sudo rm /var/www/master.zip 2>/dev/null]='Cleaning up the dashboard temp files...'
|
commands["Downloading the Pi-hole dashboard"]="sudo wget https://github.com/jacobsalmela/AdminLTE/archive/master.zip -O /var/www/master.zip"; echoes+=( "Downloading the Pi-hole dashboard" )
|
||||||
[sudo touch /var/log/pihole.log]='Creating a log file for the Pi-hole...'
|
commands["Unpacking the dashboard"]="sudo unzip /var/www/master.zip -d /var/www/html/"; echoes+=( "Unpacking the dashboard" )
|
||||||
[sudo chmod 644 /var/log/pihole.log]='Making sure the log is readable...'
|
commands["Renaming the dashboard"]="sudo mv /var/www/html/AdminLTE-master /var/www/html/admin"; echoes+=( "Renaming the dashboard" )
|
||||||
[sudo chown dnsmasq:root /var/log/pihole.log]='Letting dnsmasq see the log file so stats can be displayed...'
|
commands["Cleaning up the dashboard temp files"]="sudo rm /var/www/master.zip 2>/dev/null"; echoes+=( "Cleaning up the dashboard temp files" )
|
||||||
[sudo curl -o /usr/local/bin/gravity.sh "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/gravity.sh"]='Initating sub-space transport...'
|
commands["Creating a log file for the Pi-hole"]="sudo touch /var/log/pihole.log"; echoes+=( "Creating a log file for the Pi-hole" )
|
||||||
[sudo curl -o /usr/local/bin/chronometer.sh "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/chronometer.sh"]='Initating sub-space transport...'
|
commands["chmodding the log file"]="sudo chmod 644 /var/log/pihole.log"; echoes+=( "chmodding the log file" )
|
||||||
[sudo chmod 755 /usr/local/bin/gravity.sh]='Making the scripts executable...'
|
commands["chowning the log file so stats can be displayed"]="sudo chown dnsmasq:root /var/log/pihole.log"; echoes+=( "chowning the log file so stats can be displayed" )
|
||||||
[sudo chmod 755 /usr/local/bin/chronometer.sh]='Making the scripts executable...'
|
commands["Initating sub-space transport of gravity"]="sudo curl -o /usr/local/bin/gravity.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/gravity.sh"; echoes+=( "Initating sub-space transport of gravity" )
|
||||||
[sudo /usr/local/bin/gravity.sh]='Entering the event horizion...'
|
commands["Initating sub-space transport of chronometer"]="sudo curl -o /usr/local/bin/chronometer.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/chronometer.sh"; echoes+=( "Initating sub-space transport of chronometer" )
|
||||||
[sudo reboot]='Restarting...')
|
commands["chmodding gravity"]="sudo chmod 755 /usr/local/bin/gravity.sh"; echoes+=( "chmodding gravity" )
|
||||||
|
commands["chmodding the chronometer"]="sudo chmod 755 /usr/local/bin/chronometer.sh"; echoes+=( "chmodding the chronometer" )
|
||||||
|
commands["Entering the event horizion"]="sudo /usr/local/bin/gravity.sh"; echoes+=( "Entering the event horizion" )
|
||||||
|
commands["Rebooting"]="sudo reboot"; echoes+=( "Rebooting" )
|
||||||
|
|
||||||
# Everything in the parentheses is part of displaying the progress bar
|
# Everything in the parentheses is part of displaying the progress bar
|
||||||
(
|
(
|
||||||
# Get total number of commands to be run from the array
|
# Get total number of commands to be run from the array
|
||||||
n=${#cmdsAndEchoes[*]};
|
n=${#commands[*]};
|
||||||
|
|
||||||
# Set counter to increase every time a loop completes
|
# Set counter to increase every time a loop completes
|
||||||
i=0
|
i=0
|
||||||
|
|
||||||
# For each key in the array
|
# For each item in the array
|
||||||
for key in "${!cmdsAndEchoes[@]}"
|
for k in "${!echoes[@]}"
|
||||||
do
|
do
|
||||||
|
|
||||||
# Calculate the overall progress
|
# Calculate the overall progress
|
||||||
|
|
@ -181,11 +183,13 @@ percent=$(( 100*(++i)/n ))
|
||||||
cat <<EOF
|
cat <<EOF
|
||||||
XXX
|
XXX
|
||||||
$percent
|
$percent
|
||||||
${cmdsAndEchoes[$key]}
|
Step $i of $n: ${echoes[$k]}
|
||||||
XXX
|
XXX
|
||||||
EOF
|
EOF
|
||||||
# Execute the command in the background (hidden from the user, not actually a background process)
|
# Execute the command in the background (hidden from the user, not actually a background process)
|
||||||
$key
|
#${echoes[$k]}
|
||||||
|
${commands[${echoes[$k]}]}
|
||||||
|
sleep 1
|
||||||
done
|
done
|
||||||
# As the loop is progressing, the output is sent to whiptail to be displayed to the user
|
# As the loop is progressing, the output is sent to whiptail to be displayed to the user
|
||||||
) |
|
) |
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue