The newly added variables STRIP_BINARIES, STRIP_SHARED and STRIP_STATIC,
that are set in makepkg.conf, specify the strip options used on binaries
and shared and static libraries.
In addition, files are now stripped more aggressively by default.
Implements FS#13592 the way it was suggested by Allan in the comments.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If PACMAN environment variable is set, makepkg will try to use this
command to check for installed dependencies and to install or remove
packages. Otherwise, makepkg will fall back to pacman.
Implements FS#13028.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: move envvar section in manpage]
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows makepkg to only build a specified subset of packages
from a split PKGBUILD. This is very useful in combination with the
-R flag or when bumping the pkgrel of a single package.
Fixes FS#15956.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
For some packages, generally the 'any' arch ones, a build step is not
required and therefore can be skipped. In these cases, a package()
function without a build() one is sufficient.
As a side effect, this commit makes meta packages without any function
at all in the PKGBUILD possible.
Fixes FS#15147.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows building a mixture of binary and arch=any packages.
Fixes FS#15955.
The value of CARCH is no longer overridden to "any" in when arch=any
is used and the assigning of the "any" arch is delayed to during the
packaging stage. Adjustments were required to fix installing and
checking for pre-built packages of varing arches.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixing a single package within a split package requires the overriding
or pkgrel. In very rare (but existing) cases, it is useful to
override pkgver. Partial fix for FS#15955.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently, a changelog is added to a package if a specific file with a
hardcoded name exists in the PKGBUILD's directory. This approach is not
pretty and also inconsistent with the handling of install files, but it
works.
With the introduction of split PKGBUILDs, however, a drawback in this
old behavior has arisen: you only have the possibility to include one
specific changelog file in either every package defined in the PKGBUILD
or in none.
The use of an additional variable, `changelog`, works around this issue
and makes it possible to include a changelog in only some of the
packages, and besides, each package of the PKGBUILD can have its own
changelog file.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When a SyncFirst transaction kicks in, no flags like '--force' are honored.
This is for good reason, as honoring something like '--asdeps' could be
quite unintentional. Document this fact and a possible workaround.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch utilizes the power of sync.c to fix FS#3492 and FS#5798.
Now an upgrade transaction is just a sync transaction internally (in alpm),
so all sync features are available with -U as well:
* conflict resolving
* sync dependencies from sync repos
* remove unresolvable targets
See http://www.archlinux.org/pipermail/pacman-dev/2009-June/008725.html
for the concept.
We use "mixed" target list, where PKG_FROM_FILE origin indicates local
package file, PKG_FROM_CACHE indicates sync package. The front-end can add
only one type of packages (depending on transaction type) atm, but if alpm
resolves dependencies for -U, we may get a real mixed trans->packages list.
_alpm_pkg_free_trans() was modified so that it can handle both target types
_alpm_add_prepare() was removed, we use _alpm_sync_prepare() instead
_alpm_add_commit() was renamed to _alpm_upgrade_targets()
sync.c (and deps.c) was modified slightly to handle mixed target lists,
the modifications are straightforward. There is one notable change here: We
don't create new upgrade trans in sync.c, we replace the pkgcache entries
with the loaded package files in the target list (this is a bit hackish) and
call _alpm_upgrade_targets(). This implies a TODO (pkg->origin_data.db is
not accessible anymore), but it doesn't hurt anything with pacman front-end,
so it will be fixed later (otherwise this patch would be huge).
I updated the documentation of -U and I added a new pactest, upgrade090.py,
to test the syncdeps feature of -U.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This implements FS#15581
'-Su foo' should be more or less equivalent do '-Su ; -S foo'
Note : I moved a block of code to a new process_target function
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
See FS#15984
After commit 02acf65, the --source behavior changed.
Thanks to Dan for actually writing the new sentence :)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
only allow optdepends like:
pkgname: description
some (real) examples of invalid optdepends:
'tcl, python and/or ruby: to use corresponding binding'
'xorg-fonts-75dpi : X bitmap fonts needed for the interface'
'ruby-htmlentities (AUR): for one provider named Deastore'
'xpdf - for pdf'
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Allan: rebase off de39a1f6 and adjust man page]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
similarly to the $repo variable, Server can now contain $arch, which will be
automatically replaced by the appropriate architecture.
This allows us to have one universal mirrorlist file, for both i686 and x86_64,
woohoo!
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Implements FS#15830
This option allows to build a PKGBUILD with no checksums
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
- fix one memleak if get_filename failed
- cleanup according to Joerg's feedback:
"url_for_string: If fetchParseURL returned successful, you should always
have a scheme set. The logic for anonftp should only be needed for very
broken server -- do you know of any such?
download_internal:
Specifying 'p' is now a nop -- it is tried by default first with
fall-back to active FTP."
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: remove from pacman.conf and pacman.conf.5]
Signed-off-by: Dan McGee <dan@archlinux.org>
If the user switches from unstable repo to a stable one, it is quite hard to
sync its system with the new repo (the user will see many "Local is newer
than stable" messages, nothing more). That's why I introduced -Suu, which
treats a sync package like an upgrade, iff the package version doesn't match
with the local one's.
I added a new pactest (sync104.py) to test this, and I updated the
documentation of -Su.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: slight doc reword]
Signed-off-by: Dan McGee <dan@archlinux.org>
This implements FS#13877. Add a new option "-Qk" which checks if all of the
files for a given package (or packages) are really on the system (i.e. not
accidentally deleted). This can be combined with filters and other display
options. It also respects both the --quiet and --verbose flags to give
varying levels of output.
Based on the original patch by Charly Coste <changaco@laposte.net>, thanks
for your work!
Signed-off-by: Dan McGee <dan@archlinux.org>
It was undocumented that multiple regexps are interpreted using logical AND.
Thanks to Recursive@#archlinux for his help.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The pacman --help pages and the manual suggested that only one package can
be upgraded/removed per transaction.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The old documentation didn't emphasize our filtering options at all, and it
was a bit misleading. ("List ALL...")
I also clarified the description of -Qu.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
repo-remove.8 is generated with Makefile but is not removed on clean.
This patch add it to list of untracked autoconf files.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Dan McGee <dan@archlinux.org>
With --quiet flag, -Ql doesn't print the package name, just lists the files.
I made --quiet documentation up-to-date (I also added -Sgq/-Qgq).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Move some of our documentation files, even though they aren't manpages, to
the doc/ directory. This allows the new 'html' make target to manage them.
Signed-off-by: Dan McGee <dan@archlinux.org>
Now the comment was showing up in the generated manpage and HTML
documentation. Just kill it as asciidoc keeps screwing us over.
Signed-off-by: Dan McGee <dan@archlinux.org>
After some irc/forum experiences, I decided to document this option.
However, I left the debug-level undocumented (--debug=2).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
1) The changes to sync.c look big but there are mostly caused by
the indentation. Fix a bug where download_size == 0 because the packages and
deltas are already in the cache, but we still need to build the deltas list
and apply the deltas to create the final package.
2) Fix the gzip / md5sum issue by switching to xdelta3, disabling external
recompression and using gzip -n in pacman, and disable bsdtar compression
and using gzip -n in makepkg.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
The pkgdelta script can be used instead.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch allows us to split the building and packaging stages of
a PKGBUILD and minimize fakeroot usage. This can be done with less
code duplication (run_build and run_package look quite similiar) but
the run_package function will be where the package splitting logic
is implemented in the future.
Signed-off-by: Allan McRae <allan@archlinux.org>
This patch started as a simple typo fix (pugre instead of purge in two
places), as well as a fix of a test which was using PURGE_TARGETS instead of
$PURGE_TARGETS.
It evolved in a slight handling change of the OPTIONS which have a variable
affecting their behavior (strip STRIP_DIRS, docs DOC_DIRS, zipman MAN_DIRS
and purge PURGE_TARGETS), as well as a clarification in makepkg.conf. Now
when a variable is undefined or empty, the corresponding option will have no
effect. It looked weird to have a fallback when a option is defined but
empty, it seems more natural to not have any fallbacks.
Also re-enable docs by default. It seems arbitrary to delete files from
packages by default, and it would be more vanilla and distro agnostic to
keep them. docs was also the only negated option.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Provide support for specifying LDFLAGS within makepkg.conf but leaves
this undefined by default. Fixes FS#12542.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The purge option, combined with the PURGE_TARGETS variable,
allows makepkg to automatically remove commonly confliting or
removed files (e.g. /usr/share/info/dir, *.pod).
Original work: Tim Yang
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Provides a MAN_DIRS variable in makepkg.conf which can be used
to specify folders to look for manual (man and info) pages to be
compressed. Useful for packages that install to /opt. Also
clarifies that "zipman" means "zip manuals" and covers both man
and info pages.
Original work by: Tiago Pierezan Camargo <tcamargo at gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
As reported here, man pages could no longer be built :
http://archlinux.org/pipermail/pacman-dev/2008-December/007726.html
I found the explanation here :
http://www.methods.co.nz/asciidoc/source-highlight-filter.html
"If you use a2x(1) to generate PDF you need to include the --no-xmllint
option to suppress xmllint(1) checking — the programlisting language
attribute (required by the dblatex source highlighter) is not part of the
DocBook 4 specification (but it is in the newer DocBook 5 specification)."
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Using > or < in the provides array is wrong so make it cause an error.
Fixes FS#12540.
Also, use bash substitution rather than spawning new processes where
possible in the error checking. Move split package detection to a
better position.
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: backport to maint]
Signed-off-by: Dan McGee <dan@archlinux.org>
I mess this up more often than not, and maybe this will do the trick. Remove
the --enable-asciidoc option as it has been superseded by the --disable-doc
option in usefulness. If you want to skip building docs, you skip building
all docs which is much easier when it comes to ensuring the make 'dist' and
'distcheck' targets will always build the manpages and always build the most
up to date manpages.
Developers shouldn't be affected in their normal builds, nor should end
users of the source tarball.
Signed-off-by: Dan McGee <dan@archlinux.org>
A source entry can now have the following form, to specify a different
filename :
"filename::http://path/to/file"
Of course, the old syntax is still supported :
"http://path/to/file"
And as before, in the second case, the filename used is simply "file".
This fixes FS#11292, because handling multiple source files with the same
name is now possible (just choose a different filename).
But it will also allow to deal much more nicely with funny url like this by
using a sane filename (and unfortunately, there are quite a few) :
http://www.vim.org/scripts/download_script.php?src_id=6992
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit 7865fb9af4, info pages are now treated like man pages.
This means even with !docs, info pages will still be included. And including
info pages was the main reason the docs option was enabled by default
recently. So this is now longer needed, and we can revert back to !docs by
default for disabling gigantic html pages and other docs.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
DB_COMPRESSION was only used in repo-add and DB_CHECKSUMS was not used
anywhere.
This also removes the dependency on makepkg.conf in repo-add, so repo-add no
longer needs to source makepkg.conf
And instead of DB_COMPRESSION, it seems better to just check the extension
of the repository file. It does not make sense to have a tar.gz file with a
tar.bz2 extension or whatever.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
As far a package building is concerned, info pages need to be treated
in the same fashion as man pages in that they both can be compressed.
This separates them from other forms of documentation and so it makes
sense to make that distinction within makepkg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Change the return values to be more informative.
It was previously boolean, only indicating if a sync package was newer than
a local package.
Now it is a simple wrapper to vercmp, handling the force flag.
* Remove the verbose output from _alpm_pkg_compare_versions.
The "force" message is not so useful.
The "package : local (v1) is newer than repo (v2)" message can be moved to
-Su operation.
For the -S operation, it is better to have something like :
"downgrading package from v1 to v2"
* Don't display the "up to date -- skipping" and "up to date -- reinstalling"
messages, when the local version is newer than the sync one.
* Fix the behavior of --needed option to not skip a target when the local
version is newer, and clarify its description.
* Add a new alpm_pkg_has_force function
This allows us to access the pkg->force field like any other package fields.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
By doing the bolding manually, it doesn't look as cool in the HTML generated
manpages. Let asciidoc do the work.
Signed-off-by: Dan McGee <dan@archlinux.org>
This vercmp issue has been a sticking point but this should resolve many of
the issues that have come up. Only a few minor code changes were necessary
to get the behavior we desired, and this version appears to beat any other
vercmp rendition on a few more cases added in this commit.
This commit passes all 58 vercmp tests currently out there. Other 'fixes'
still fail on a few tests, namely these ones:
test: ver1: 1.5.a ver2: 1.5 ret: -1 expected: 1
==> FAILURE
test: ver1: 1.5 ver2: 1.5.a ret: 1 expected: -1
==> FAILURE
test: ver1: 1.5-1 ver2: 1.5.b ret: 1 expected: -1
==> FAILURE
test: ver1: 1.5.b ver2: 1.5-1 ret: -1 expected: 1
==> FAILURE
4 of 58 tests failed
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch introduces a new STRIP_DIRS makepkg.conf option
to change makepkg's search path when stripping binaries.
Original work by: Thomas Bächler <thomas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Now '-S provision' handling is done in the back-end.
In case of multiple providers, the first one is selected (behavior change:
deleted provision002.py). The old processing order was: literal, group,
provision; the new one: literal, provision, group. This is more rational,
but "pacman -S group" will be slower now. "pacman -S repo/provision" also
works. Provision was generalized to dependencies, so you can resolve deps by
hand: "pacman -S 'bash>2.0'" or "pacman -S 'core/bash>2.0'" etc. This can be
useful in makepkg dependency resolving. The changes were documented in
pacman manual.
alpm_find_pkg_satisfiers and _alpm_find_dep_satisfiers functions were
removed, since they are no longer needed.
I added some verbosity to "select provider instead of literal" and
"fallback to group".
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add documentation for $startdir, $srcdir, and $pkgdir variables, as well as
general information about the build() function and about custom variables
in PKGBUILDs. This addresses FS#10634.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch offers a way to fix FS#9228.
By putting "SyncFirst = pacman" in pacman.conf, the version check will
happen before the transaction really starts, and before any replacements is
made.
Otherwise, no version check is done.
The sync301 pactest was updated to use this SyncFirst option.
Example session with SyncFirst = pacman, and a newer pacman version
available :
$ pacman -Su (or pacman -S <any targets>)
:: the following packages should be upgraded first :
pacman
:: Do you want to cancel the current operation
:: and upgrade these packages now? [Y/n]
resolving dependencies...
looking for inter-conflicts...
Targets: pacman-x.y.z-t
Total Download Size: x.xx MB
Total Installed Size: x.xx MB
Proceed with installation? [Y/n] n
As Nagy previously noted, doing this check on any -S operations might look
intrusive, but it can be required.
For example, the case where you want to install a package with versioned
provisions, using a pacman version which didn't support that feature yet
(and there is already a newer pacman in sync db supporting it).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
They are pretty noisy scripts in their normal course of operations, so allow
all messages to be squashed except for warning and error messages with this
new flag.
Signed-off-by: Dan McGee <dan@archlinux.org>
From http://www.stack.nl/~dimitri/doxygen/config.html#cfg_javadoc_autobrief
JAVADOC_AUTOBRIEF
If the JAVADOC_AUTOBRIEF is set to YES then doxygen will interpret the
first line (until the first dot) of a JavaDoc-style comment as the brief
description. If set to NO (the default), the Javadoc-style will behave just
like regular Qt-style comments (thus requiring an explicit @brief command
for a brief description.)
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
