Instead, go the same route we have always taken with version-release in
libalpm and treat it all as one piece of information. Makepkg is the only
script that knows about epoch as a distinct value; from there on out we will
parse out the components as necessary.
This makes the code a lot simpler as far as epoch handling goes. The
downside here is that we are tossing some compatibility to the wind;
packages using force will have to be rebuilt with an incremented epoch to
keep their special status.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add the "buildflags" option, which is useful in its negative form
for disabling CFLAGS, CXXFLAGS and LDFLAGS when building a package.
This is useful when determining of one of these flags is causing
an issue with a package.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Populate $cur and $prev with the new bash-completion 1.2 function,
_get_comp_words_by_ref.
_get_cword and _get_pword have been deprecated.
Signed-off-by: Carlos Diaz <839273@gmail.com>
BASH is defined when you are actually using bash during configure, which
sucks because it ends up being '/bin/sh', messing up all of our scripts.
Change the name of the variable we use in configure, and also ensure we get
a full path to the executable by using AC_PATH_PROGS rather than
AC_CHECK_PROGS. Finally, change the variable name everywhere we use it.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Add a .gitignore file
* Use the same 'GEN' output we have in the scripts/ Makefile when doing our
edits on the .in files
* Remove PKGBUILD.vim and vimprojects from our edit list, they have no need
to be in the list
Signed-off-by: Dan McGee <dan@archlinux.org>
This applies to contrib/ files, our scripts, and the documentation.
Dan: fix 'make clean' in contrib/ directory.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is needed If we want to use sysconfdir,localstatedir and other variables.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is not a bash builtin, so can potentially cause portability issues.
Additionally, the use of it is completely unnecessary as it can all be done
within bash (and done faster).
$ time pactree xfwm4 >/dev/null (old version)
real 0m3.245s
$ time ./contrib/pactree xfwm4 >/dev/null (new version)
real 0m3.042s
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently bacman always compresses with gzip now matter what PKGEXT is
set to. Rework the entire package creation process to be similar to
that in makepkg. This also make the explicit assumption that PKGEXT is
defined in makepkg.conf.
Thanks to Nelson Chan <khcha.n.el@gmail.com> for the original patch to
fix the incorrect package compression.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Avoids letting the shell evaluate ! as something else (e.g. an alias).
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
To avoid errors with bash 3.2, compopt will be skipped if it's not a
shell builtin.
compopt is needed to not append slashes to package names that
coincide with directories in PWD.
This is currently not possible to fix in bash versions that do not support
compopt, so these users will have to bear that regression.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Now that we have the '[installed]' text, update pacsearch to look for it and
highlight it instead of the former '***' prefix.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Undeclared local vars with common enough names to warrant breakage
* Performance issues with _pacman trying to replicate /usr/bin/pacman
with find and other slow tools.
* Performance issues with expanding an array (with sometimes hundreds of
items) over three times.
* Expanding said array to remove already completed entries had the side
effect of braking filenames with spaces and or \n.
* add -D --database options and --print
* fix dirs showing up when they shouldn't in completions
* completions regarding database entries shouldn't trigger filename
completion.
This is now down to 106 lines. The original one (master) is 365 lines
long, yet this one retains all functionality.
The work is documented in FS#16630.
Signed-off-by: Andres P <stderr@mail.com>
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Of course, we still have only md5 and sha1 hardcoded here but I resisted the
urge to copy paste for the rest of our supported checksums in hope that
someone knows how to do it a better way.
Signed-off-by: Dan McGee <dan@archlinux.org>
Updated list with :
echo $(pacman -Ql licenses | grep "/usr/share/licenses/common/.*/$" | cut
-d'/' -f6 )
Maybe PKGBUILD.vim could do this at runtime ?
Dan: you forgot the symlinks; readded FDL, GPL, LGPL.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
And a new --print-format option to configure the output.
This implements FS#14208
Example usage :
pacman -Sp --print-format "%r/%n-%v : %l [%s]" kdelibs
extra/kdelibs-4.3.2-4 : ftp://mir2.archlinuxfr.org/archlinux/extra/os/i686/kdelibs-4.3.2-4-i686.pkg.tar.gz [0,00]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The location of the used utilities may and does differ between various
distributions and therefore absolute paths do not work well. Since the
main purpose of its introduction was to avoid side-effects caused by
aliases, it is sufficient to disable possible aliases temporarily by
preceding the commands with a backslash.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently, a changelog is added to a package if a specific file with a
hardcoded name exists in the PKGBUILD's directory. This approach is not
pretty and also inconsistent with the handling of install files, but it
works.
With the introduction of split PKGBUILDs, however, a drawback in this
old behavior has arisen: you only have the possibility to include one
specific changelog file in either every package defined in the PKGBUILD
or in none.
The use of an additional variable, `changelog`, works around this issue
and makes it possible to include a changelog in only some of the
packages, and besides, each package of the PKGBUILD can have its own
changelog file.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This implements FS#13877. Add a new option "-Qk" which checks if all of the
files for a given package (or packages) are really on the system (i.e. not
accidentally deleted). This can be combined with filters and other display
options. It also respects both the --quiet and --verbose flags to give
varying levels of output.
Based on the original patch by Charly Coste <changaco@laposte.net>, thanks
for your work!
Signed-off-by: Dan McGee <dan@archlinux.org>
Prints the install script from a given package file or from a package
in the pacman repo.
Original-work-by: Giulio "giulivo" Fidente <giulivo.navigante@gmail.com>
Improvements-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
I initially only wanted to add a -l/--locate option to use locate instead of
find, which should have been easy.
Then I thought I would try to support filename with whitespace while I was
at it, and this was a bit more complex. The safest ways seem to be the
following ones : http://mywiki.wooledge.org/BashFAQ/020
Then I received a lot of suggestions on #bash about how to improve the
script, which I tried to address.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: fix grouping of find arguments]
Signed-off-by: Dan McGee <dan@archlinux.org>
The option parsing was catching any "-d" in an argument so packages
with this in their name did not work.
Also removed commented code line that appears to be inserted during
testing.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Something such as "pacsearch foo|bar" would cause problems due to the
quoting being dropped. Adding quotes solves the problem.
Signed-off-by: Dan McGee <dan@archlinux.org>
Pactree is a dependency tree viewer for installed packages.
It features both textual and graphic (through graphviz) output.
Script by: Carlo Bersani <carlocci@gmail.com>
[Allan: removed whitespace errors]
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: killed some unnecessary lines, moved license header]
Signed-off-by: Dan McGee <dan@archlinux.org>
test -e tries to resolve the link before testing, so if the link is copied
before the actual file, the script exited. This fixes the issue.
[Dan: also add some improved quoting in the script]
Signed-off-by: Carlo Bersani <carlocci@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Original work by Carlo "carlocci" Bersani with additions by
Xavier Chantry and Allan McRae
This script rebuilds an already installed package using metadata
stored into the pacman database and system files. Replaces the
outdated re-pacman script
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The paclist script provides a simple method for monitoring which packages
are installed from a given repo. This is particularly useful when using a
testing or unstable repository.
Thanks to Allan McRae for the idea and an initial bash script. As suggested
by Dan, I tried to rewrite in perl, and this resulted in much better
performance. Then Dan further cleaned up the script.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: add to Makefile & README, minor script cleanups]
Signed-off-by: Dan McGee <dan@archlinux.org>
This rewrite in perl blows the socks off the old shell script version for
large searches:
$ time ./pacsearch.perl ^.*$ >/dev/null
real 0m0.836s
user 0m0.593s
sys 0m0.217s
$ time pacsearch.sh ^.*$ >/dev/null
real 1m53.818s
user 1m16.818s
sys 0m33.694s
Functionality and output is identical to the old version with the exception
of the old version's missing EOL after all the output. It should be a lot
easier to add new things like the --color flag that has been a TODO at the
top of the script for a long time.
Signed-off-by: Dan McGee <dan@archlinux.org>
From 41cc28f560bf9843d81ce5fb62b884b6325d06a0 Mon Sep 17 00:00:00 2001
From: Allan McRae <mcrae_allan@hotmail.com>
Date: Sun, 6 Apr 2008 22:18:06 +1000
Subject: [PATCH] Quote filenames in find expression in pacdiff
Small patch to allow pacdiff to run in /etc. See FS#10090.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Also fix a broken contrib/ Makefile, found with make distcheck. I also let
the little translation linebreak update slip in here as it was small enough
not to be a big deal, and this should just prevent it from happening again
later anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
in PKGBUILD.proto, we have the following line
md5sums=() #generate with 'makepkg -g'
if we add a md5sum inside quotes, or even just the quotes :
md5sums=('') #generate with 'makepkg -g'
the highlighting will be totally messed up.
Adding the keepend keyword fixes this.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
