Provides a MAN_DIRS variable in makepkg.conf which can be used
to specify folders to look for manual (man and info) pages to be
compressed. Useful for packages that install to /opt. Also
clarifies that "zipman" means "zip manuals" and covers both man
and info pages.
Original work by: Tiago Pierezan Camargo <tcamargo at gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When we do our sed edits, we really don't need every command printed out to
the terminal. Now with "make -s", the output is quite palatable.
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit 7865fb9af4, info pages are now treated like man pages.
This means even with !docs, info pages will still be included. And including
info pages was the main reason the docs option was enabled by default
recently. So this is now longer needed, and we can revert back to !docs by
default for disabling gigantic html pages and other docs.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
DB_COMPRESSION was only used in repo-add and DB_CHECKSUMS was not used
anywhere.
This also removes the dependency on makepkg.conf in repo-add, so repo-add no
longer needs to source makepkg.conf
And instead of DB_COMPRESSION, it seems better to just check the extension
of the repository file. It does not make sense to have a tar.gz file with a
tar.bz2 extension or whatever.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
As far a package building is concerned, info pages need to be treated
in the same fashion as man pages in that they both can be compressed.
This separates them from other forms of documentation and so it makes
sense to make that distinction within makepkg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
curl is likely to be available on the majority of systems and supports the
file:// protocol.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch introduces a new STRIP_DIRS makepkg.conf option
to change makepkg's search path when stripping binaries.
Original work by: Thomas Bächler <thomas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
All other steps in tidy_install function were already controlled by an
option in makepkg.conf, so this patch adds an option for the man page
compression step too.
This will allow to keep man pages uncompressed, which is required for some
special meta man page, like the zshall one (see FS#4580).
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011472.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Download to *.part and remove the suffix if successful, thus md5sums will be
checked only for complete files, and next time makepkg will resume
downloading of partial file instead of complaining about invalid md5sums.
Old DLAGENTS format is still supported.
Late fix: Do not try to download %u first
The output of grep was not suppressed, thus the output of get_downloadcmd
was wrong because of extra line at the beginning that contained an
unsubstituted (with %o and %u) entry from DLAGENTS.
Signed-off-by: Roman Kyrylych <roman@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Arch no longer installs Gnome here, and we should be stripping any doc dirs
in /opt anyway, so generalize it. Fixes FS#9597.
Signed-off-by: Dan McGee <dan@archlinux.org>
We shouldn't have the stock config be Arch specific for a few reasons:
* Although it is our package, others should be able to use it
* Keeping the mirrorlist coupled to the pacman package makes it hard to push
updates to users without releasing a new copy of the pacman source
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch cleans up the Arch-specific pacman.conf (to be provided in
the pacman Archlinux package) in an attempt to reduce the number of
PEBKAC errors seen enabling default-disabled repos.
Signed-off-by: Travis Willard <travis@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
abs has always been an Arch Linux specific tool, and although it is used
primarily by pacman and makepkg, it should not be included with a distro-
agnostic tarball. In addition, maintenance of the script would be better
outside of pacman and would allow for more frequent updates.
This also facilitates our move away from a cvsup/csup dependent tool for
syncing PKGBUILDs.
Signed-off-by: Dan McGee <dan@archlinux.org>
Now that all paths are defined to reasonable defaults at compile time by
pacman, we shouldn't force users to have RootDir, DBPath, etc. in their
default pacman.conf although these options are always available.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove the need for two variables for the architecture-specific switches
(things like "-march=i686") by combining it into one variable. Also allow
configure to proceed with only a warning if we don't have presets for the
detected architecture- it is kind of stupid to restrict ourselves like we
had been.
Signed-off-by: Dan McGee <dan@archlinux.org>
.gitignore works recursively, so we don't need Makefile and Makefile.in
in all of the subdirectory .gitignore files.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fully implement what this commit allows:
ebad199614
Dan: update .gitignore as well.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
I previously introduced some patches to make just about every path in
pacman/libalpm configurable; doing this with the lockfile seemed a bit too
far and we really should just place the lockfile where it belongs- with the
DB that needs locking.
More details in this thread:
http://archlinux.org/pipermail/pacman-dev/2007-June/008499.html
Signed-off-by: Dan McGee <dan@archlinux.org>
* Add vim modeline to Makefile.am and configure.ac
* Fix white space in Makefile.am and configure.ac
* Add contrib/wget-xdelta.sh to EXTRA_DIST in Makefile.am
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the defaults for RootDir, CacheDir, DBPath, and LockFile into
pacman.conf, just as LogFile was done before. Add a section to
alpm_parse_config to look for a LockFile directive.
Signed-off-by: Dan McGee <dan@archlinux.org>
* etc/makepkg.conf.in: Add description for xdelta.
* doc/makepkg.conf.5: Add description for xdelta.
* scripts/makepkg.in: Various clean ups.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
* configure.ac: Add AC_SUBST() for ROOTDIR, PKGEXT, DBEXT so
they get exported to Makefiles.
* {makepkg,pacman}.conf.in: Remove extra / from paths.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Fix up everything in the etc/ directory so it is built at make-time and
not configure-time. This reduces configure generated files to just the
makefiles, which is the correct way to do things. This also allows a switch
from @@REPO@@ to the more sane @REPO@ in mirrorlist.in, and kills the
two-part generation of the mirror files.
Signed-off-by: Dan McGee <dan@archlinux.org>
By setting up a few more AC_SUBST macros in configure.ac, we can fill in
paths in the scripts on the fly instead of having them in multiple places.
Other small fixes:
* Fix an oops on my last commit where I had some lines stil commented.
* Fix makepkg bug where the generated package name using PKGEXT had two
periods (..).
Signed-off-by: Dan McGee <dan@archlinux.org>
GCC-4.2.0 requires -mtune=generic to produce binaries optimized for
generic i686/x86_64. By default it tries to optimize a for the host
system building the package.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
A few changes to undo my stupid mistake earlier wrt fakeroot checking,
and unify the output and usage of 'makepkg.conf'.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch fixes FS #4404 as well as adding support for future protocols by
generalizing the concept of a download agent and allowing a downloader to
be specified for each protocol.
Original work done by Andrew Fyfe <andrew@neptune-one.net>.
Signed-off-by: Dan McGee <dan@archlinux.org>
Moved the following variables into /etc/makepkg.conf
* BUILDSCRIPT
* PKGEXT
* DB_COMPRESSION
* DB_CHECKSUMS
Cleaned up sourcing of /etc/makepkg.conf in scripts and source
~/.makepkg.conf if it exists.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Move all .cvsignore files to .gitignore for switch in VCS. In addition,
delete ones that were unnecessary because they only contained Makefile
and Makefile.am.
Signed-off-by: Dan McGee <dan@archlinux.org>
Giovanni Scafora <linuxmania@gmail.com>
* Changed default SRCDEST in makepkg.conf. Two reasons:
1) consistency with PKGDEST in /home/packages
2) building packages as root is NOT recommended, so no reason to ever
encourage this use by caching source in a dir with root permissions
Yes, we may all do this differently and build our packages in other
directories. But that is why they are variables and can be set anyway.
occasions where some alpm stuff could be used without initializing the
library (vercmp is one). TODO make these functions (handle accessors)
better by returning "library not initialized" instead of failing.
* Removed NoUpgrade lines from pacman.conf - we need to test this!
* Re-corrected the lib targets for src/util/*
* make dist seems to have updated the po files
* Updated all of the language files, as the POT file was updated. NOTE FOR
TRANSLATORS, try to base your next contribution off of these, notice how
some msgids and messages have been wrapped to the next line- it makes it
easier to read anyway.
* More Makefile.am/configure.ac updates. 'make dist' and 'make distclean' now
work properly, with only one caveat- the automatic testing in distclean
doesn't do so hot as it is compiled with a default configure, which includes
the fakeroot-proof code (which does not cooperate with pactest).
* Added a Makefile.am for the pactest directory.
and not always MARCH). Also changes makepkg.conf.in to not have commented -mcpu
lines (due to the above), but to have a comment about the differences in -march
and -mcpu
most of the former options in makepkg.conf, and are described in detail
there:
BUILDENV=(fakeroot !distcc color !ccache)
OPTIONS=(strip !docs !libtool emptydirs)
Note that PKGBUILD specified options will always have final say. They will
now be specified as they are above, except using lowercase 'options' array.
* makepkg was fixed so options actually work as expected.
* Added libdownload check in configure.ac
* Added generation for mirrorlists in pacman.d
NOTE: autoconf sucks for things like this, so gen-mirrorlist is required
Dan McGee <dpmcgee@gmail.com>:
* mirrorlist.in file
Roman Kyrylych <roman.kyrylych@gmail.com>:
* ukrainian mirror
Jürgen Hötzel <juergen@hoetzel.info>:
* conditional build for pacman.static
