1) Do not attempt to strip compressed binaries
Original-work-by: Marc - A. Dahlhaus <mad@wol.de>
2) Add "\" in "GPL\'ed" so quote mark does not break source code highlighting
3) Add local to docdir paths in makepkg.conf for consistency
4) Use full path to sed in MacOSX in case users have GNU sed earlier in
path
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Do a sed replacement in-place is not very portable. On Mac OSX and
BSDs, the syntax is "sed -i ''" where as with GNU sed the command is
"sed -i''" or just "sed -i". This patch detects which command should
be used during configure.
Credit to Kevin Barry who researched this issue and provided a patch
to work around this using temporary backup files.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Change configure.ac to use the full path of stat when on darwin/mac.
This is needed for situations when a user installs the GNU/coreutils
and places it in their path before /usr/bin, but the SIZECMD is
already configured for Darwin's version of stat.
Signed-off-by: Kevin Barry <barryk gmail com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Aaron said to consider libdownload a dead project so libdownload support was
removed to more easily fix libfetch one (otherwise many ifdef needed).
There was no direct replacement for ferror to detect an error while
downloading. So instead, I added a check at the end to see if the file was
fully downloaded, which is just a small chunk of code taken from here:
http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/net/libfetch/files/fetch.c?only_with_tag=MAIN
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 4b183bf9 moved makepkg.conf sourcing to after the parsing
of options, breaking the -p option and --help output. The solution
is to move BUILDSCRIPT out of makepkg.conf. This patch moves the
definition BUILDSCRIPT back to makepkg itself and adds configure
option to allow easy changing of this value during build time.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
I mess this up more often than not, and maybe this will do the trick. Remove
the --enable-asciidoc option as it has been superseded by the --disable-doc
option in usefulness. If you want to skip building docs, you skip building
all docs which is much easier when it comes to ensuring the make 'dist' and
'distcheck' targets will always build the manpages and always build the most
up to date manpages.
Developers shouldn't be affected in their normal builds, nor should end
users of the source tarball.
Signed-off-by: Dan McGee <dan@archlinux.org>
Added a Makefile.am for the pactest/tests dir. This is a blatant ripoff
of scripts/Makefile.am, which replaces predefined expressions in
NAME.py.in pactests with configure variables.
This can be used to write pactests which consider compile time options.
Signed-off-by: Henning Garus <henning.garus@gmail.com>
[Dan: autotools are tough, make a few adjustments for correctness]
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 149839c539 introduced a small behavior regression as a drawback
for a better portability. repo-add now includes the approximate size (to the
nearest KB) rather than an exact size due to the switching of the du command
to a more portable form. Instead of sacrificing the exact size, use
configure to help us determine a valid command to acquire our filesize and
place it in the sync database.
Signed-off-by: Dan McGee <dan@archlinux.org>
This presents plenty of problems on OSes besides Linux, and even on Linux
when the libtool file for libarchive isn't present. The static build isn't
all that useful anyway as missing something such as glibc will still leave
you unable to run the pacman.static binary. Remove it from the formal build
process.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a new configure flag, --enable-git-version, that allows the output of
'git describe' to be used in the version string associated with this
package. This could aid in debugging for users that are using a development
version of pacman and we should be able to figure out which cut of code they
are using.
Sample output:
$ pacman --version
Pacman v3.1.4-190-g4cfa-dirty - libalpm v2.3.1
$ makepkg --version
makepkg (pacman) 3.1.4-190-g5861-dirty
Signed-off-by: Dan McGee <dan@archlinux.org>
This should remove the need for any additional patching to run on platforms
that have libfetch available but not libdownload. It isn't the prettiest,
but we have kept our libdownload impact down to just a few files, so it can
be easily done.
Signed-off-by: Dan McGee <dan@archlinux.org>
Darwin's binary format does support symbols with differing visibilities, but
it does not support the protected or internal visibilities- only hidden. For
Darwin only, we should fall back to this visibility to prevent warnings from
the compiler and because it is close enough for our library purposes.
See http://gcc.gnu.org/viewcvs/*checkout*/trunk/gcc/config/darwin.c, search
for the "darwin_assemble_visibility" function for more details.
Also add pacman.static.exe to gitignore.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove a few functions and things that were unnecessary, update the help
line calls to the current function name, and make the small change to
pacman.c for the signal handler return type that is defined in config.h.
Signed-off-by: Dan McGee <dan@archlinux.org>
We use this function once in our codebase, but fortunately the workaround is
relatively easy. swprintf() is not available on Cygwin so the compile failed
there, but we can do a series of mbstowcs() calls that produce the same end
result as the swprintf() call.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a new --disable-internal-download flag to configure allowing the
internal download code to be skipped. This will be helpful on platforms that
currently don't support either libdownload or libfetch (such as Cygwin) and
for just compiling a lighter weight pacman binary.
This was made really easy by our recent refactoring of the download code
into separate internal and external functions, as well as some error code
cleanup.
Signed-off-by: Dan McGee <dan@archlinux.org>
Also fix a broken contrib/ Makefile, found with make distcheck. I also let
the little translation linebreak update slip in here as it was small enough
not to be a big deal, and this should just prevent it from happening again
later anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 012f793978 was a bit misguided in its
thinking, and resulted in a package built without asciidoc enabled not
installing the manpages to the system on a 'make install' operation. Fix
this behavior by making manpages required in a normal build, and in order to
disable their existence, the '--disable-doc' option must be used.
Hopefully this solves manpage issues for both developers and package
builders while allowing as much flexibility as possible.
Signed-off-by: Dan McGee <dan@archlinux.org>
abs has always been an Arch Linux specific tool, and although it is used
primarily by pacman and makepkg, it should not be included with a distro-
agnostic tarball. In addition, maintenance of the script would be better
outside of pacman and would allow for more frequent updates.
This also facilitates our move away from a cvsup/csup dependent tool for
syncing PKGBUILDs.
Signed-off-by: Dan McGee <dan@archlinux.org>
Because building of pacman.static fails on some platforms, we should make
it optional. It is enabled by default but can be disabled with the use of
the --disable-pacman-static flag.
Signed-off-by: Dan McGee <dan@archlinux.org>
Hopefully these new autoconf macros, with a little magic, will allow us to
compile with any compiler and still choose the options we have available
to us.
Tested locally with gcc 4.2.2 and gcc 3.4.6; the latter doesn't support two
of the items we previously had hardcoded in our CFLAGS.
Signed-off-by: Dan McGee <dan@archlinux.org>
Do a little cleanup of our configure script. Highlights:
* Remove macros deemed unnecessary to call [1]
* Change check for compiler to look for one that is C99 capable-
this automatically adds the -std=gnu99 flag
[1] Noted in the autoconf NEWS file, notably entries for 2.59d
Signed-off-by: Dan McGee <dan@archlinux.org>
Use an autoconf macro to find us a python executable, preferring python2.5
if we can find it. From there, fall back to python2.4 and then python.
Signed-off-by: Dan McGee <dan@archlinux.org>
