As seen with the recent upgrade of pacman and the removal of the
pacman.d/current mirrorlist, files that were formerly in the backup array
get deleted upon their removal, which could be dangerous. Instead, we should
use the combined backup array of the old and new package. This fix should
address this issue in a relatively straightforward way.
In addition, old files should be moved to pacsave locations as expected.
Signed-off-by: Dan McGee <dan@archlinux.org>
That is the problem mentioned by Nagy there (with suggestions for fixing it) :
http://www.archlinux.org/pipermail/pacman-dev/2007-August/009082.html
If a dependency conflicts with a local package and has to replace it,
the PM_SYNC_TYPE_DEPEND information is lost, and the resulting install
reason is wrong (the package is marked as explictly installed).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
remove048 is the case mentioned there (fails in 3.0 but works in 3.1) :
http://www.archlinux.org/pipermail/pacman-dev/2007-September/009294.html
It's the same as remove046 with -R instead of -Rc.
sync060 is a case reported this morning on IRC :
a pacman -Su wanted to replace gensplashutils by gensplash,
but pacman said gensplashutils was required by initscripts-gensplash,
while initscripts-gensplash was not even installed.
This is also fixed in the current 3.1 code though.
upgrade02{4,5} are the backup handling problem I described there :
http://www.archlinux.org/pipermail/pacman-dev/2007-September/009376.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
The sync package pkg3 depends on the sync package pkg2, but pkg1 replaces pkg2.
So pkg2 is added to the remove list.
When checkdeps checks if pkg2 can be removed, it looks at the packages that require pkg2
(with the RequiredBy field of pkg2), but this doesn't contain pkg3 at this point.
RequiredBy fields are only updated after the packages are installed.
Proposed solution : checkdeps should know both the remove and upgrade list to decide properly.
Reference:
http://www.archlinux.org/pipermail/pacman-dev/2007-July/008972.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This patch cleans up and fix the _alpm_trans_update_depends function
and ensure that all requiredby fields are filled in case of multiple satisfiers
(previously, the handling of mutliple satisfiers in that function was inconsistent).
This makes a special case handling of requiredby in commit_single_pkg() obsolete,
and so allows cleaning that code as well.
Also fixed upgrade056 pactest because :
1) the requiredby fields were wrong, and this wouldn't happen with the fixed _alpm_trans_update_depends().
2) this is a very unusual case anyway (and handling all corner cases combined to a broken database
seems nearly impossible to achieve).
References :
http://www.archlinux.org/pipermail/pacman-dev/2007-July/008919.htmlhttp://www.archlinux.org/pipermail/pacman-dev/2007-July/008920.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
A side effect of the previous commit ( ea9a756eea )
is that it's now possible to use versioned conflicts.
Add two new conflict pactests for showing it.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
.gitignore works recursively, so we don't need Makefile and Makefile.in
in all of the subdirectory .gitignore files.
Signed-off-by: Dan McGee <dan@archlinux.org>
This test installs three packages with a circular dependency,
to check everything still goes fine in that case.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This replaces the former -D operation that was undocumented and rather
hacky. It can be used with add, upgrade, or sync transactions and will affect
all packages installed. Should close FS #7193.
Also tell makepkg to use this new flag.
Signed-off-by: Dan McGee <dan@archlinux.org>
sync022 was added here:
39b6549655
This pactest reverses the installed package to see if it is correctly
picked, in order to test some further changes to this depcheck code that
currently makes sync022 fail.
Signed-off-by: Dan McGee <dan@archlinux.org>
This indicates a problem in the current removedeps function
(no version checking) for which Nagy proposed a fix here :
http://www.archlinux.org/pipermail/pacman-dev/2007-June/008539.html
But as he mentioned there, a better fix might be to use the checkdeps
function in the removedeps one.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
pactest was sleeping for 3 seconds, which is unnecessary. Reduce it to 1.5
seconds and clean up the code a bit anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add the ability to check the permissions and type of a file within the
framework of pactest. Two new rules can be used:
self.addrule("FILE_TYPE=bin/foo|file")
self.addrule("FILE_MODE=bin/bar|644")
TODO: add the ability to add different types of files (eg links) via the test
package building framework, and add the ability to change the modes on files.
Signed-off-by: Dan McGee <dan@archlinux.org>
I previously introduced some patches to make just about every path in
pacman/libalpm configurable; doing this with the lockfile seemed a bit too
far and we really should just place the lockfile where it belongs- with the
DB that needs locking.
More details in this thread:
http://archlinux.org/pipermail/pacman-dev/2007-June/008499.html
Signed-off-by: Dan McGee <dan@archlinux.org>
As described in the bug report, installing taglib-rcc (sync900 pactest)
works fine. But installing taglib back (sync901 pactest) doesn't.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Same as remove040, with cascaded remove instead of simple remove.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Add vim modeline to Makefile.am and configure.ac
* Fix white space in Makefile.am and configure.ac
* Add contrib/wget-xdelta.sh to EXTRA_DIST in Makefile.am
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
Most of these new tests deal with provisions upon sync or upgrade being
changed by packages, and pacman not being smart enough to deal with
it yet.
Signed-off-by: Dan McGee <dan@archlinux.org>
This change allows us to use all autoconf specified paths, most notably
$(localstatedir). It is quite a change and touches a lot of files, as
all references to the DB and cache were done with the ROOTDIR as a prefix.
* add --lock command-line option to pacman to specify the location of the
lockfile (this can now be specified at configure time by setting the
$localstatedir path).
* Rip quite a few settings out of configure.ac as they are now picked by
setting the paths during configure or make.
* Fix bug with /tmp fallback for sync downloads not working correctly
(related to root location, now the system tmp dir is used).
* Simplified the parameters to some libalpm functions, and added get/set
for the new lockfile option.
* Renamed several of the DEFS to names without the PM_ prefix.
Signed-off-by: Dan McGee <dan@archlinux.org>
These should test various aspects of the DB when dealing with requiredby
entries. At least one fails without Nagy's alpm_depcmp patch.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Move all .cvsignore files to .gitignore for switch in VCS. In addition,
delete ones that were unnecessary because they only contained Makefile
and Makefile.am.
Signed-off-by: Dan McGee <dan@archlinux.org>
reordering and adding ones that were forgotten (noticed when trying to
compile after reordering).
* Updated the HACKING file to include information on #include usage.
* print -> vprint in "making dir" function in pactest.
* Added a custom 'mkdir' function which makes parents and doesn't fail on
existence
* Added output for 'SKIP' messages (it did not indicate WHY it was skipped)
* Added the ability to generate DB packages in the sync dir (not the cache dir)
for testing downloading. (self.cachepkgs = False)
* Added pmtest.path for the full path to the package file
allows for the same bit operators to be used across the board on pkg_get
operations.
* Changed name of INFRQ_NONE -> INFRQ_BASE to more clearly reflect what it
does (loads pkg name and version).
* Added a few missing things on package functions, such as SYMEXPORT and
ALPM_LOG_FUNC.
* Slight updates to pmenv to print 'pass' and 'fail' instead of 'passed' and
'failed'. Keeps output a bit more concise.
* Fixed a doxygen comment spelling error. :P
about bigger DB changes later, but lets not screw anything up for release.
* Removed some weird uses of "not ... ==" usage in pactest- correct me if I'm
wrong, but isn't "!=" a lot more clean and concise?
* Print description of failed tests in the pactest summary. This could get
dirty with a lot of failed tests though, so watch out.
for and is a dependency of another package. (upgrade057)
* Removed man2html stuff from doc/Makefile.am.
* Patch: improved depends checking in _alpm_checkdeps
Nagy Gabor <ngaba@petra.hos.u-szeged.hu>
* Slight revisions to pmrule.py to allow for a PKG_PROVIDES test.
* Very quick updates to the pactest README.
* Added rules to some of the newer upgrade tests. Note: upgrade055 now fails
due to requiredby entries not being written packages that are dependencies
in a provides role.
* Added the actual "Nagy's bug" as upgrade055.py.
* Updated the Makefile to distribute the pactest readme.
* Removed COPYING from the pactest directory- see COPYING at the root for the
same license.
provides, and conflicts.
- upgrade051 is known to fail- but we want to eventually make it work.
- upgrade052 is Nagy's bug as reported on the ML- I think. If it isn't,
let me know.
through to pacman, whereas --verbose affects the pactest output - this cleans
up the standard test output significantly
* sorted tests a bit better, sectioning off failed tests AFTER successful tests,
to make it easier to see what failed at a glance
* added a 'testname' member to pmtest, which strips path info (cleaner output)
* Updated all of the language files, as the POT file was updated. NOTE FOR
TRANSLATORS, try to base your next contribution off of these, notice how
some msgids and messages have been wrapped to the next line- it makes it
easier to read anyway.
* More Makefile.am/configure.ac updates. 'make dist' and 'make distclean' now
work properly, with only one caveat- the automatic testing in distclean
doesn't do so hot as it is compiled with a default configure, which includes
the fakeroot-proof code (which does not cooperate with pactest).
* Added a Makefile.am for the pactest directory.
