"else"-case, so onItemClick -handler still gets registred.
Else inserting the SD-card without leaving the activity,
THEN clicking the account will not do anything.
Provides for storing Folder Settings in the central Preferences
Storage as a back-up to the settings stored on each folder. In this
way, even if the LocalStore DB is recreated or otherwise lost, Folder
Settings can be recovered.
1) Does not change the methodology used to read settings while
running, nor the changes in r3107 & r3116 which tremendously improve
Accounts list loading time.
2) Loads Folder Settings from Preferences and stores on the folder
only when creating a new LocalFolder
3) Saves Folder Settings to Preferences and the DB row every time the
Folder Settings are changed.
4) When upgrading from DB version 41 to 42 or later, copies all
settings for existing folders from the DB storage to the Preferences
Storage.
5) Transactional bulk folder creation and single pass local folder
existence check during "Refresh folders" operation drastically reduces
time spent when refreshing folders from the remote store.
6) Uses prepared statement during Editor commit to reduce Preference
storing time.
Probably needs a reversion of r3239, but I'm unfamiliar with
translations, so am leaving that to others' discretion.
This revision respects the intention of r3011 that when K-9 Mail is
set for pushing only no message is displayed, as that condition is a
normal state. However, it provides valuable feedback in other cases
that synchronization is off-line, as was done in r1433.
Although the case when the user has intentionally set no account for
polling or pushing can be considered "normal" and therefore unworthy
of a message, it turns out to be a significant burden to detect that
situation when the network is offline, since we normally do not even
try to figure out the account configurations in that case. Therefore,
without making substantial, otherwise unwarranted, changes to
MailService.java, "Syncing off" would be displayed sometimes to such a
user, and sometimes not. Since it is presumably a rare case, and
there is minimal harm to display the "Syncing off" message, the
message will be consistently displayed when no account is set for
polling or pushing.
Note to translators:
"Syncing off" is different than "Polling off". The new phrase "Syncing
off" means that K-9 Mail is not performing any synchronization with
any mail server. The prior non-English phrases for "Polling off" are
currently in-place as translations for "Syncing off", as it seems that
the meanings are close enough that it would be better to show the
obsolete translations that to fallback to the English "Syncing off".
However, better translations of "Syncing off" would be welcome.
"smaller" (and smaller) fonts by allowing the Accounts and Folder List
items to have a height smaller than the normal Android minimum. This
option is off by default to maintain existing behavior for
uninterested parties. The preferences text is not especially
compelling so could certainly be changed if better phrasing is found.
This reverts commit 9fc94115adb58dcd8a64227a93d0e6e707d7752d.
It turns out that disabling the "View attachment" button (rather than
giving a useful error message telling the user what mime type the app
needs to support) was confusing to users.
Refactor forwarding header (header-style quote header) into individual string pieces that are assembled in code to accommodate future HTML version of headers.
Introduced four new strings for translation.
UiThread:
Fixes a common error from the market:
android.view.ViewRoot$CalledFromWrongThreadException: Only the original thread that created a view hierarchy can touch its views.
at android.view.ViewRoot.checkThread(ViewRoot.java:2802)
at android.view.ViewRoot.invalidateChild(ViewRoot.java:607)
at android.view.ViewRoot.invalidateChildInParent(ViewRoot.java:633)
at android.view.ViewGroup.invalidateChild(ViewGroup.java:2505)
at android.view.View.invalidate(View.java:5139)
at android.view.View.setFlags(View.java:4502)
at android.view.View.setVisibility(View.java:3030)
at
com.fsck.k9.activity.MessageList.hideBatchButtons(MessageList.java:2883)
at
com.fsck.k9.activity.MessageList.toggleBatchButtons(MessageList.java:2906)
at com.fsck.k9.activity.MessageList.access$500(MessageList.java:77)
at
com.fsck.k9.activity.MessageList$MessageListAdapter.pruneDirtyMessages(MessageList.java:2302)
at com.fsck.k9.activity.MessageList$1.run(MessageList.java:811)
where you're unlikely to even have access to them the first time you
walk through into the "Folders" preferences.
At the same time, move toward using a list preference widget, rather
than a custom activity.
- extracted handling of external intents to a new method
- only allow mailto URI for ACTION_VIEW and ACTION_SENDTO (as documented by AOSP)
- allow additional recipients via "to" parameter in mailto URI
- removed check for allowed MIME type when adding attachments since we're accepting all MIME types anyway
- show CC and BCC text fields when one of those recipient types was set by the intent
- use MIME type specified in intent for attachments (if present and doesn't contain a "*")
* mail-on-sd: (40 commits)
Added more comments to explain how the locking mecanism works for LocalStore
Fixed wrong method being called during experimental provider initialization (since provider isn't enabled, that didn't harm)
Add more comments about how the various StorageProviders work and how they're enabled
find src/com/fsck/ -name \*.java|xargs astyle --style=ansi --mode=java --indent-switches --indent=spaces=4 --convert-tabs
French localization for storage related settings
Remove unused SD card strings (replaced with storage indirection)
Merge mail-on-sd branch from trunk
Reset mail service on storage mount (even if no account uses the storage, to be improved)
find src/com/fsck/ -name \*.java|xargs astyle --style=ansi --mode=java --indent-switches --indent=spaces=4 --convert-tabs
Migraion -> Migration
move the Storage location preference into preferences rather than the wizard.
Made LocalStore log less verbose Added @Override compile checks
Added ACTION_SHUTDOWN broadcast receiver to properly initiate shutdown sequence (not yet implemented) and cancel any scheduled Intent
Be more consistent about which SQLiteDatabase variable is used (from instance variable to argument variable) to make code more refactoring-friendly (class is already big, code extraction should be easier if not referencing the instance variable).
Added transaction timing logging
Factorised storage lock/transaction handling code for regular operations.
Use DB transactions to batch modifications (makes code more robust / could improve performances)
Merge mail-on-sd branch from trunk
Update issue 888 Added DB close on unmount / DB open on mount
Update issue 888 Back to account list when underlying storage not available/unmounting in MessageView / MessageList
...
- Ported to the ColorPickerDialog API
- Translated the API and Internals from Indonesian to English
- Moved to use K-9 strings rather than custom strings.
In an ideal world, we should use ambilwarna as an android library
project, like it was intended.
updates on a thread rather than on the main ui thread. it results
in the list blinking with old data, but that's still a better user
experience than "frozen"
This doesn't work on initial sync, since the comparisons fail and you're
left with duplicates in the displayed mailbox
This reverts commit fa1c88bec348d0132acc60a320626bf0ca1170ec.
the list, use a less painful equality check than iteration.
This works because messageInfoHolders compare to each other using the
same key as message they contain.
- Moved ListPreference helper functions from FontSizeSettings to K9PreferenceActivity
- Used helper functions in Prefs
- Reordered preferences in Prefs to match the order in global_preferences.xml (display order)
- Removed the contact names cache (memory leak)
- Changed Contacts.searchByAddress() to Contacts.getNameForAddress(). Cursor is now immediately closed.
- Only try to resolve contact names when "Global settings" -> "Show contact name" is checked
- Never resolve contact names if number of recipients exceeds a threshold
Don't export the formatted date through the content provider: now exported as the raw Epoch value - date formatting is a UI concern. That makes MessageInfoHolder lighter.
Status: Fixed
Extracted Intent.ACTION_SENDTO handling in a separate block to extract data from URI (as opposed to ACTION_SEND which uses Intent extras to pass data)
Added an option whether the registered name color is change or not
Avoid "Connection error" when MessageView is opened. The contacts.getName() might return null.
Extracted notification related settings in separate class (see Issue 2268)
Update issue 371
Status: Fixed
Added ability to disable LED notification for new messages
updates on the UI thread rather than the sync thread. This is a huge
performance boost (based on simple empirical testing) for initial syncs
as we now do more work as we add messages to message lists
When selecting one of the five vibrate patterns or the number of repetitions, we should demonstrate to the user what the vibrate pattern feels like. (Thanks to achen.code)
use the ListPreference instead of the EditTextPreference to set vibrate times.
Respect "Return to list after delete" after pressing on "Archive", "Move", or "Spam" button.
TODO: Change strings to reflect this change (e.g. "Return to list after move/delete")
* ideal-screenreader:
The IDEAL Group have joined the K-9 dogwalkers and submitted their code to be part of K-9!
Initial import of the Ideal K-9 branch which adds support for screenreaders.
themselves up for download.
To do so, we need to start storing the original content-id and
content-disposition for attachments - this includes a database upgrade.
Based on a patch from @achen.code
Added option to automatically show images in message view (always, if sender is in contacts, never).
Patch by paulkilroy (thanks!)
Includes bugfix for the "Show pictures" on orientation change code introduced earlier.
was loading the "loading..." file into the WebView. Since it doesn't
take that long to load the real content, replacing the "Loading..." file
with "blank the view" seems to actually feel a heck of a lot faster.
into the messagelist is now much, much faster. Intentionally loading the
whole mailbox before we let the user interact with the list is
increasingly painful. A 250 message mailbox takes 2+ seconds to "unlock"
on a modern phone.
Consequently, this commit switches us _back_ to progressive loading of
mailboxes from the synchronous version.
Based on user feedback, we may or may not keep this for the production
release.
* remotes/issue814:
Changed the appearance of the ChooseAccount activity to better match the look of the account list.
svn:eol-style set to LF (UNIX style)
Update issue 814 Status: Started Cc: +fiouzy Reuse of res/layout/accounts_item.xml to match account list Automatically expand/scroll to Intent-presented account
- Patch provided by fiouzy (ability to choose identity from other accounts) - Modifications in MessageCompose by cketti (use MessageReference to replace mFolder and mSourceMessageUid)
Created branch for issue 814 (Feature to select account to send from in compose screen)
list, don't "bother" sorting the messagelist again before opening the
message, it adds a _bit_ of slowness when we don't need it and
we'll sort again when we get back to the message list.
Update issue 662
We tried out the long press for a bit and deemed it too sensitive for general usage. It can cause problems with gestures and such, so I removed it again. I hope using the option menu is not too much overhead.
If you want to include it in your custom build or anything, then r 1976 and r1977 should be enough.
Update issue 662
Added the long press initiation of text selection. I also noticed we'll have to make sure text selection is not recognized as a gesture (or at least ignored as gesture).
for sorting. This will prevent spam with ...less true dates from pushing
messages to the top of your list. Additionally, when downloading
messages from the server, they'll actually appear in the order they were
received - the existing behaviour really screwed up users who were
trying to triage mail as it came in.
The standard ScrollView causes problems when selecting text (and the message is long enough so scrolling is possible). The newly introduced ToggleScrollView can be set to disable scrolling via touch gestures thus making copying multi-line text sections possible.
Fixes issue 662
Should query whether saving the draft message or discarding when back button was pressed.
Suppress to save the draft message automatically when attaching any file.
Implements new setting "Sync remote deletions" which is checked by
default. When unchecked, K-9 Mail will no longer remove messages from
local storage just because the message was removed from the server.
This functionality works for all account types. Messages will still
be removed from the local store in order to stay within the limit
imposed by the "Number of messages to display" setting.
Provide for only showing folders that are subscribed on the server
(IMAP only)
Also:
Change default for Notification behavior to the old way. Make going
to the search for unread messages off by default.
Fix up some hiding of labels, etc. on the incoming server settings.
Check for message suppression in search results.
- Created "controller" and "mail.filter" package
- Moved a lot of classes to new/other packages
- Removed unused classes: NoSuchProviderException, MessageDateComparator
Simplify WakeLocks use by pushing.
Correct fault in IMAP IDLE WakeLock usage. The ThreadLocal in
MessagingControllerPushReceiver meant that the WakeLock acquired when
the DONE was sent was not being released when entering back into IDLE
state.
Consolidate the account notification so that all Activities use the
methods in MessagingController.
Fixes Issue 1577
Issue 1551:
Some IMAP servers send untagged EXPUNGEs to IDLEing
clients without ever haven't sent an untagged FETCH. The untagged
EXPUNGEs are harder to deal with because they don't have a UID. So,
if the user has elected to have the IDLE connection start with a poll,
we can maintain a map of message sequence numbers to UIDs that we can
use to figure out which message to delete. To mitigate the risk of
the map falling out of date, we do a UID SEARCH UID before removing
the local copy of the message, just to make sure the message is really
gone from the server. If we detect an error, do another poll to
resync the map.
Issue 1577:
Restore the removal of notifications for an account when the account's
unread message count goes to 0.
Fixes Issue 1562
Issue 1474:
Provide new facility to totally wipe all data for an account but leave
settings intact. This is useful because sometimes storage is so full
that SQLite cannot perform the usual VACUUM or message deletion.
Add confirmation dialogs to destructive Clear and Recreate operations.
Remove destructive Clear from FolderList so as not to have to
duplicate the confirmation dialogs.
Issue 1562:
Suppress notifications when new messages arrive in Trash, Sent or
Drafts special folders.
Fixes Issue 772
Fixes Issue 852
Issue 300: Handle incoming IMAP tokens in a case-insensitive manner
Issue 772: Add Yahoo workaround
Issue 852: Add configurable IMAP IDLE refresh frequency in Incoming
server settings
Also:
Add configuration option for whether push system executes a poll on
each connect.
Move the configuration for the maximum number of push folders to the
Incoming server Settings.
Keep search results in sync with newly arrived or deleted messages.
Intentionally does not remove messages from search results due to
flag (flagged/starred or read/unread) state changes, because that
would be awkward while manipulating messages in search results.
Pass around simple Serializable MessageReference objects containing
account UUID, folder name and message UID so that MessageView can
traverse lists of messages which span folders and accounts.
Fixes ClassCastException.
Also:
Envelope and star in Accounts Activity are now both "hot". Tapping
the main part of the search opens the full search; tapping the
envelope opens the search only for unread messages; tapping the star
opens the search but only for starred messages.
The envelope and star are a bit small to reliably tap. Both options
should be available via long-press, also.
Methodology will be extended to real accounts, as well.
Fixes Issue 1431
Present flagged message count inside a star, matching the visual
presentation on individual messages.
Provide display of unread and flagged message counts for canned
searches.
Perhaps the message counts for searches and account size display
should be defeatable for improved speed.
Computing the account size is pretty slow for big accounts, and making
this functionality optional should be considered.
Also, displays the number of flagged messages ("stars") in each
account in the Accounts list and each folder in the FolderList. Needs
better presentation of the flagged message counts, but this works as a
proof-of-concept and gets the data structures built.
Not done, yet, but available for developers to use.
Definite things to be done in the short term:
1) Allow user to hide canned searches in Accounts Activity
2) Make newly arrived mail immediately appear in search results.
Possible improvements:
3) User-definable searches
4) Make newly deleted mail immediately disappear search results.
5) Make message with flag changes immediately appear/disappear from
search results.
6) Show search result size in Accounts Activity.
Allow user to turn off gesture-based control.
Also, consolidate so that gestures could be used by other subclasses
of K9Activity. Probably should be made usable to K9ListActivity, too,
by making MyGestureDetector its own class and make it used by
K9Activity and K9ListActivity, and have the Activities implement a
callback interface for onNext and onPrevious.
Provides for the user to elect to have certain folders displayed first
in the FolderList. Folders so elected are displayed in alphabetical
order first, then folders not so elected are displayed alphabetical
order.
No special handling is done for Inbox any more, except that it is in
"top group" by default, to preserve current behavior until the user
changes the settings.
Implement DEFLATE compression for IMAP communication, enabled by
default. User can disable compression for Wi-Fi, Mobile, or Other
networks, if it causes problems or if uncompressed communication is
faster, which is possible on Wi-Fi and wired networks, especially.
"Other" is to allow for the Android platform to introduce new
networking types without having to immediately change K-9 Mail.
However, as those arise, new network types should be added as explicit
types in K-9 Mail.
Fixes Issue 1278
Fixes Issue 119
Fixes Issue 1077
Fixes Issue 1238
Worked performed by danapple0 and cketti in
https://k9mail.googlecode.com/svn/k9mail/branches/issue1116
Add support for most batch ops (except move and copy) in search
results. Add support for batch move and copy on real folders.
Increase efficiency of bulk IMAP moves and copies by doing as multiple
UID operations.
Eliminated serialization of Account objects.
Provide up-references in useful places to make all future code cleaner
and more efficient.
Fixed a bunch of draft handling
Merged from issue1116 branch, except for Account.java, which was
copied wholesale. Account.java was manually merged in issue1116
branch at r1489
svn merge -r 1459:1489 https://k9mail.googlecode.com/svn/k9mail/branches/issue1116 .
cp ../issue1116/src/com/fsck/k9/Account.java src/com/fsck/k9/Account.java
Provide for setting Sent folder to -NONE- which suppresses actually
saving sent mail in any folder.
Also, eliminate logging which folders are not configured for pushing.
It was just too much logging.
Only reschedule polling and setup pushing when necessary due to
particular setting changes. Makes the K-9 Mail UI much more
responsive to setting changes that do not affect polling and pushing.
The poll schedule is deliberately only rescheduled when the period is
decreased. An increase in period will still allow the next scheduled
check to happen as originally scheduled.
Fixes Issue 1034
Refresh Account from Preferences, so that it'll have a fresh copy of
all information. Failure to do this caused the AccountSettings
Activity to show stale information when invoked repeatedly from the
same prior Activity.
Provides for menu items to quickly change the mode of displayed
folders. Also, reorganizes the menu to have an Advanced sub-menu,
like Accounts page has.
Desparately needs a new icon for the Folders menu item.
physical keyboards, though, and should be modified to only re-setup
pushers. Current implementation causes a wasteful reschedule of
polling.
Also gets the help Toast for the folder up-to-date after the
FolderList/MessageList split.
force-closes and inconsistent data on activity reuse. Also, removing
broken/unused code to preserve activity state across invocations.
across invocations.
* Add an explicit configuration option for stars
* Replace now-outdated "left handed" widgets config option, now that
select widgets are always on the left.
* since the multi-modality of the message list was now only a "toggle
stars" option, kill that, as it was lots of code and rather redundant
always-available select action. For the moment, this means
that widgets_on_left does nothing at all. based on feedback, I may kill
the preference and multi-mode behaviour entirely in favor of "show stars?"
(and possibly "show stars on left"
Stars, "checkboxes" and color bars updated to actually fit in wide mode.
Fixes Issue 806
Make sure to close opened folders in finally blocks in
MessagingController.
Don't make another connection when deleting or copying a
message. (Nicely speeds up copy and delete, as well.)
Another connection is still created for creating a folder while
copying or deleting (a pretty rare event), and the IMAP IDLE
connections are not re-used for user initiated activity.
global config option rather than a per-account one. (But with a new
implementation.) - As we now have views that show messages across
accounts, this needed to become a global)
MessagingController was calling the MessagingListener twice for
deleted messages. By the time the second call was made, some
Activities already had removed the message holder, so a null holder
was being put on the list.
This change should prevent the double calls, and adds protection
against have the MessageList MessagingListener called with a message
that is no longer in the MessageList.
Also, some logical cleanups.
push technology. This provide a layer of safety in case of
misconfiguration (accidentally setting too many folders to push using
classes), which can bog down the device till it is unusable. On a G1,
25 folders is a very large load. Fixes Issue 871.
Also, move some pending commands to the background to make way for
more important user interface activity.
On each IMAP account, the expunge behavior can be set to expunge
messages in a folder as soon as a move or delete is performed on the
folder ("immediately"), each time the folder is polled, or only when
executed manually.
In the Message List, there is now an Expunge action in the option
menu.
In the Folder List, there is now an Expunge action in the context
menu (long-press on the folder).
For IMAP accounts, it is also possible to disable the copying of deleted messages to the
Trash folder, by setting the Trash folder to -NONE-.
Fixes Issue 536.
Separately, in WebDAV accounts, the user can now choose the
server-side equivalents of the special folders, just like for IMAP.
count, scoped for the Activity, the in-progress operation, the account
on which the operation is in progress, the folder for the operation,
when appropriate, and the progress of the operation, when it applies
to multiple items. For the MessageList, also use the determinate
progress bar to show progress for synchronization of the folder being
displayed.
Fixes Issue 924.
Also, a minor change that might help with Issue 913, by putting the
insertion of the pending command into a background thread.
r51837@31b (orig r127): ismarc31 | 2008-11-10 19:10:50 -0500
Experimental branch for Exchange WebDAV support
r51838@31b (orig r128): ismarc31 | 2008-11-10 19:24:52 -0500
Initial proof-of-concept code for WebDav support
r51839@31b (orig r129): ismarc31 | 2008-11-10 22:02:37 -0500
Fixed a couple of migration issues and enabled WebDav as a mail type
r53269@31b (orig r132): ismarc31 | 2008-11-21 21:55:55 -0500
Mostly rewritten class and organization. Better implementation of message fetching.
Consolidated response parsing. Removed a large number of redundant calls. There is still
some unused functions needing cleaning up, and some unimplemented actions
r53338@31b (orig r133): ismarc31 | 2008-11-22 16:50:02 -0500
Removed more redundant and unused calls. Implemented checking read status
r53453@31b (orig r134): ismarc31 | 2008-11-24 20:13:24 -0500
Added support for marking messages as read.
r53454@31b (orig r135): ismarc31 | 2008-11-24 22:04:04 -0500
Added support for deleting messages server side
r53455@31b (orig r136): ismarc31 | 2008-11-25 01:32:19 -0500
Improved flag setting functionality, do bulk HTTP request instead of lots of little ones
r53589@31b (orig r138): young.bradley | 2008-11-29 16:18:25 -0500
Missing some ports (webDavPorts); this causes an array index out of bounds exception when anything other than "None" or "SSL (Optional)" are selected.
Adding the three additional ports solves this issue.
r53590@31b (orig r139): young.bradley | 2008-11-30 00:47:42 -0500
Initial support for sending via WebDav
r53591@31b (orig r140): ismarc31 | 2008-11-30 20:12:41 -0500
Fix for display names being URL Encoded for folders. Initial support of Uid Hashmaps instead
of plain arrays.
r53592@31b (orig r141): ismarc31 | 2008-11-30 21:46:06 -0500
Fix to constructor of HttpGeneric(final String uri). URLs returned from Exchange aren't
always fully encoded, this fixes the encoding before creating the method.
r53593@31b (orig r142): ismarc31 | 2008-12-01 02:22:16 -0500
Completed support for using hashmaps instead of arrays for indexing urls to emails and read
status. Delete is safe again and read status is correct the first time through.
r53594@31b (orig r143): ismarc31 | 2008-12-01 22:20:50 -0500
Fix for double-Inbox display issue. Removed volumous amounts of Log.d messages.
r53644@31b (orig r157): young.bradley | 2008-12-04 15:14:28 -0500
Fix for wildcard certificates (e.g. issued to *.example.com). Only checking the
trust of the certificate itself, since apparently the full chain causes it to
not work.
r53765@31b (orig r161): ismarc31 | 2008-12-06 18:55:08 -0500
Implemented new functionality for pulling message envelope. Uses a WebDAV call for all messages rather than parsing the stream. Message size is properly set now as well.
r54055@31b (orig r163): jessev | 2008-12-06 19:28:24 -0500
* merge fixes
Now pulls k9.VISIBLE_LIMIT_INCREMENT and says "Load up to (increment value) more".
Also, the build number was auto-updated by my build script. This shows up in the debug menu. It would be nice to have ant handle this, but I'm not sure how to make it do that.
