Added imap_parse_custom_request() for parsing the CURLOPT_CUSTOMREQUEST
parameter which URL decodes the value and separates the request from
any parameters - This makes it easier to filter untagged responses
by the request command.
For consistency changed the logic of the imap_state_append_resp()
function to test for an unsucessful continuation response rather than a
succesful one.
The APPEND operation needs to be performed in several steps:
1) We send "<tag> APPEND <mailbox> <flags> {<size>}\r\n"
2) Server responds with continuation respose "+ ...\r\n"
3) We start the transfer and send <size> bytes of data
4) Only now we end the request command line by sending "\r\n"
5) Server responds with "<tag> OK ...\r\n"
This commit performs steps 4 and 5, in the DONE phase, as more
processing is required after the transfer.
Some state changes would be performed after a failure test that
performed a hard return, whilst others would be performed within a test
for success. Updated the code, for consistency, so all instances are
performed within a success test.
Not processing the final FETCH responses was not optimal, not only
because the response code would be ignored but it would also leave data
unread on the socket which would prohibit connection reuse.
A typical FETCH response can be broken down into four parts:
1) "* <uid> FETCH (<what> {<size>}\r\n", using continuation syntax
2) <size> bytes of the actual message
3) ")\r\n", finishing the untagged response
4) "<tag> OK ...", finishing the command
Part 1 is read in imap_fetch_resp(), part 2 is consumed in the PERFORM
phase by the transfer subsystem, parts 3 and 4 are currently ignored.
Added a loop to imap_statemach_act() in which Curl_pp_readresp() is
called until the cache is drained. Without this multiple responses
received in a single packet could result in a hang or delay.
RFC 3501 states that "the client MUST be prepared to accept any response
at all times" yet we assume anything received with "* " at the beginning
is the untagged response we want.
Introduced a helper function that checks whether the input looks like a
response to specified command, so that we may filter the ones we are
interested in according to the current state.
Introduced similar handling to the FETCH responses, where even the
untagged data responses are handled by the response handler of the
individual state.
Removed this pointer to a downloaded bytes counter because it was set in
smtp_init() to point to the same variable the transfer functions keep
the count in (k->bytecount), effectively making the code in transfer.c
"*k->bytecountp = k->bytecount" a no-op.
Removed this pointer to a downloaded bytes counter because it was set in
pop3_init() to point to the same variable the transfer functions keep
the count in (k->bytecount), effectively making the code in transfer.c
"*k->bytecountp = k->bytecount" a no-op.
Removed this pointer to a downloaded bytes counter because it was set in
imap_init() to point to the same variable the transfer functions keep
the count in (k->bytecount), effectively making the code in transfer.c
"*k->bytecountp = k->bytecount" a no-op.
From a maintenance point of view the code reads better to view tagged
responses, then untagged followed by continuation responses.
Additionally, this matches the order of responses in POP3.
Updated the mailbox variable to correctly reflect it's purpose. The
name mailbox was a leftover from when IMAP and POP3 support was
initially added to curl.
Updated the FETCH command to send the UID and SECTION parsed from the
URL. By default the BODY specifier doesn't include a section, BODY[] is
now sent whereas BODY[TEXT] was previously sent. In my opinion
retrieving just the message text is rarely useful when dealing with
emails, as the headers are required for example, so that functionality
is not retained. In can however be simulated by adding SECTION=TEXT to
the URL.
Also updated test801 and test1321 due to the BODY change.
Removed user and passwd from the SMTP struct as these cannot be set on
a per-request basis and are leftover from legacy FTP code.
Changed some comments still using FTP terminology.
Removed user and passwd from the POP3 struct as these cannot be set on
a per-request basis and are leftover from legacy FTP code.
Changed some comments still using FTP terminology.
Moved the mailbox and custom request variables from the per-connection
struct pop3_conn to the new per-request struct and fixed references
accordingly.
Created a new IMAP structure and changed the type of the imap proto
variable in connectdata from FTP* to the new IMAP*.
Moved the mailbox variable from the per-connection struct imap_conn to
the new per-request struct and fixed references accordingly.
Moved the clean-up of the mailbox variable from imap_disconnect() to
imap_done() as this variable is allocated in the do phase, yet would
have only been freed only once if multiple selects where preformed
on a single connection.
Always interprets the pointer passed with the CURLOPT_WRITEDATA or
CURLOPT_READDATA options of curl_easy_setopt() as a void pointer in
order to avoid problems in environments where FILE and void pointers
have non-trivial conversion.
Use Curl_pp_moredata() in Curl_pp_multi_statemach() to check if there is
more data to be received, rather than the socket state, as a task could
hang waiting for more data from the socket itself.
A simple function to test whether the PP is not sending and there are
still more data in its receiver cache. This will be later utilized to:
1) Change Curl_pp_multi_statemach() and Curl_pp_easy_statemach() to
not test socket state and just call user's statemach_act() function
when there are more data to process, because otherwise the task would
just hang, waiting for more data from the socket.
2) Allow PP users to read multiple responses by looping as long as there
are more data available and current phase is not finished.
(Currently needed for correct processing of IMAP SELECT responses.)
The attempt to use gai_strerror() or alternative function didn't work as
the 'sock_error' field didn't contain the proper error code. But since
this hasn't been reported and thus isn't really a big deal I decided to
just scrap the whole attempt to output the detailed resolver error and
instead remain with just stating that the resolving of the name failed.
It seems older gcc installations (at least) will cause warnings if we
name a variable 'wait'. Now changed to 'block' instead.
Reported by: Jiří Hruška
Bug: http://curl.haxx.se/mail/lib-2013-02/0247.html
Apple made a number of changes to Xcode 4. The SDKs were moved, the entire
Developer folder was moved, and PowerPC support was removed. The script
will now adapt to those changes and should be future-proofed against
additional changes in case Apple moves the Developer folder ever again.
Also, the minimum OS X version compiler option was removed, so that the
framework can be built against the latest SDK but still run in older cats.
... since they're not used by the easy interface really, I wanted to
remove the association. Also, I unified the pingpong statemachine driver
into a single function with a 'wait' argument: Curl_pp_statemach.
A call to Curl_ssl_connect() was accidentally left in when the SSL/TLS
connection layer was reworked in 7.29. Not only would this cause the
connection to block but had the additional overhead of calling the
non-blocking connect a little bit later.
This function was only used twice, both in places where performance
isn't crucial (socks + if2ip). Removing the use of this function removes
the need to have our private version for systems without it == reduced
amount of code.
Also, in the SOCKS case it is clearly better to fail gracefully rather
than to truncate the results.
This work was triggered by a bug report on the strcal prototype in
strequal.h.
strlcat was added in commit db70cd28 in February 2001!
Bug: http://curl.haxx.se/bug/view.cgi?id=1192
Reported by: Jeremy Huddleston
Fixed a null pointer reference when an empty challenge is passed to the
Curl_sasl_create_digest_md5_message() function.
Bug: http://sourceforge.net/p/curl/bugs/1193/
Reported by: Saran Neti
An ambiguity in the SSLWrite() documentation lead to a bad inference in the
code where we assumed SSLWrite() returned the amount of bytes written to
the socket, when that is not actually true; it returns the amount of data
that is buffered for writing to the socket if it returns errSSLWouldBlock.
Now darwinssl_send() returns CURLE_AGAIN if data is buffered but not written.
Reference URL: http://curl.haxx.se/mail/lib-2013-02/0145.html
Reworked the pp->endofresp() function so that the conndata, line and
line length are passed down to it just as with Curl_client_write()
rather than each implementation of the function having to query
these values.
Additionally changed the int return type to bool as this is more
representative of the function's usage.
Corrected the order of the upgrade_tls() functions and moved the handler
upgrade and getsock() functions out from the middle of the state related
functions.
Corrected the order of the pop3_state_capa() / imap_state_capability()
and the pop3_state_capa_resp() / imap_state_capability_resp() functions
to match the execution order.
Added honoring of the tls_supported flag when starting a TLS upgrade
rather than unconditionally attempting it. If the use_ssl flag is set
to CURLUSESSL_TRY and the server doesn't support TLS upgrades then the
connection will continue to authenticate. If this flag is set to
CURLUSESSL_ALL then the connection will complete with a failure as it
did previously.
Added honoring of the tls_supported flag when starting a TLS upgrade
rather than unconditionally attempting it. If the use_ssl flag is set
to CURLUSESSL_TRY and the server doesn't support TLS upgrades then the
connection will continue to authenticate. If this flag is set to
CURLUSESSL_ALL then the connection will complete with a failure as it
did previously.
Added honoring of the tls_supported flag when starting a TLS upgrade
rather than unconditionally attempting it. If the use_ssl flag is set
to CURLUSESSL_TRY and the server doesn't support TLS upgrades then the
connection will continue to authenticate. If this flag is set to
CURLUSESSL_ALL then the connection will complete with a failure as it
did previously.
Added sending of initial CAPABILITY command before STARTTLS is sent.
This allows for the detection of the capability before trying to
upgrade the connection.
Follow up fix to commit 62bd217464 to cater for servers that don't
respond with a 250 in their EHLO responses. Additionally updated the
SMTP tests to respond with a 250 response code as per RFC5321.
Fixed the SASL capability detection to include the space character
before the authentication mechanism list. Otherwise a capability such
as SASLSOMETHING would be interpreted as enabling SASL and potentially
trying to identify SOMETHING as a mechanism.
Previously if a problem was found with one of the server's certificates,
we'd log an OSStatus for the end user to look up. Now we explain what
was wrong with the site's certificate chain. Also un-did part of the
previous commit where the code wouldn't catch errSSLServerAuthCompleted
if built under Leopard.
Fixed a small issue where smtp_endofresp() would look for capabilities
in the description part of a failure response. In theory a server
shouldn't respond with SIZE or AUTH in an EHLO command's failure
response but if it did then capabilities would be unnecessarily set
before eventually failing.
Renamed the authstate1 and authstate2 variables in imap_authenticate()
as the old name was a left over from when there was only one state
variable which was named due to a clash with the state() function.
Additionally this provides consistency with the smtp module.
Running tests\libtest\libntlmconnect.exe reveals a 1 byte (!) leak in
./lib/curl_ntlm_msgs.c:
perl ..\memanalyze.pl c:memdebug.curl
Leak detected: memory still allocated: 1 bytes
At 9771e8, there's 1 bytes.
allocated by curl_ntlm_msgs.c:399
Snippet from curl_ntlm_msgs.c:
/* setup ntlm identity's domain and length */
dup_domain.tchar_ptr = malloc(sizeof(TCHAR) * (domlen + 1));
(my domlen == 0).
'dup_domain.tbyte_ptr' looks to be freed in Curl_ntlm_sspi_cleanup() via
'ntlm->identity.Domain'. But I see no freeing of 'dup_domain.tchar_ptr'.
This bug report properly identified that when doing SMTP and aborting
the transfer with a callback, it must be considered aborted prematurely
by the code to avoid QUIT etc to be attempted as that would cause a
hang.
The new test case 1507 verifies this behavior.
Reported by: Patricia Muscalu
Bug: http://curl.haxx.se/bug/view.cgi?id=1184
It turns out that Leopard (OS X 10.5) doesn't have constants for the ECDH
ciphers in its headers, so the cases for them have been taken out of the
build when building under Leopard. Also added a standard function for
getting a string description of a SecCertificateRef.
Changed the SMTP_AUTH_PASSWD state constant to SMTP_AUTH_LOGIN_PASSWD to
better describe the state as the second part of an AUTH LOGIN command,
as well as for consistency with the imap and pop3 modules.
Introduced detection of the SASL-IR capability, in order to add support
for sending the initial response with the AUTHENTICATE command, as per
RFC4959.
Updated the automatic response tag generation to follow the examples
given in RC3501, which list a 4 character string such as A001, A002,
etc.
As a unique identifier should be generated for each command the string
generation is based on the connection id and the incrementing command
id.
When negotiating SASL DIGEST-MD5 authentication, the function
Curl_sasl_create_digest_md5_message() uses the data provided from the
server without doing the proper length checks and that data is then
appended to a local fixed-size buffer on the stack.
This vulnerability can be exploited by someone who is in control of a
server that a libcurl based program is accessing with POP3, SMTP or
IMAP. For applications that accept user provided URLs, it is also
thinkable that a malicious user would feed an application with a URL to
a server hosting code targetting this flaw.
Bug: http://curl.haxx.se/docs/adv_20130206.html
config_h.com is a new file that generates a config.h file based on the
curl_config.h.in file and a quick scan of the configure script. This is
actually a generic procedure that is shared with other VMS packages.
The existing pre-built config-vms.h had over 100 entries that were not
correct and in some cases conflicted with the build options available in
the build_vms.com.
generate_config_vms_h_curl.com is a helper procedure to the
config_h.com. It covers the cases that the generic config_h.com is not
able to figure out, and accepts input from the build_vms.com procedure.
build_curlbuild_h.com is a new file to generate the curlbuild.h file
that Curl is now using when it is using a curl_config.h file.
post-config-vms.h is a new file that is needed to provide VMS specific
definitions, and most of them need to be set before the system header
files are included.
The VMS build procedure is fixed:
1. Fixed to link in the correct HP ssl library.
2. Fixed to detect if HP Kerberos is installed.
3. Fixed to detect if HP LDAP is installed.
4. Fixed to detect if gnv$libzshr is installed.
5. Simplified the input parameter parsing to not use a loop.
6. Warn that 64 bit pointer option support is not complete
in comments.
7. Default to IEEE floating if platform supports it so
resulting libcurl will be compatible with other
open source projects on VMS.
8. Default to LARGEFILE if platform supports it.
9. Default to enable SSL, LDAP, Kerberos, libz
if the libraries are present.
10. Build with exact case global symbols for libcurl.
11. Generate linker option file needed.
12. Compiler list option only commonly needed items.
13. fulllist option for those who really want it.
14. Create debug symbol file on Alpha, IA64.
By doing this unconditionally, we infer a simpler and more defined
behavior. This also has the upside that test 1021 no longer fails for me
even if I run with valgrind.
Also fixed some wrong comments.
According KB975858 this flag may cause problems on Windows 7 and
Windows Server 2008 R2 systems. Extended error information is not
currently used by libcurl and therefore not a requirement.
The flag may improve the SSL-connection shutdown in case of an
error. This means it might be a good improvement in the future.
Fixes bug/issue #1187 - thanks for the report
When a connection is no longer used, it is kept in the cache. If the
cache is full, the oldest idle connection is closed. If no connection is
idle, the current one is closed instead.
Tidied up code from commit 6b6bdc83bdUpdated where a few instances of
the pop3c struct variable used the longer conndata struct rather than
matching what other code in pop3_authenticate() used.
Fixed an issue where (lib)curl is compiled without support for a
supported challenge-response based SASL authentication mechanism, such
as CRAM-MD5 or NTLM, the server doesn't support the LOGIN or PLAIN
mechanisms and (lib)curl doesn't fallback to Clear Text authentication.
Note: In order to fallback to Clear Text authentication properly this
fix adds support for the LOGINDISABLED server capability.
imap: Fixed no known authentication mechanism when fallback is required
Fixed an issue where (lib)curl is compiled without support for a
supported challenge-response based SASL authentication mechanism, such
as CRAM-MD5 or NTLM, the server doesn't support the LOGIN or PLAIN
mechanisms and (lib)curl doesn't fallback to Clear Text authentication.
Note: In order to fallback to Clear Text authentication properly this
fix adds support for the LOGINDISABLED server capability.
Related bug: http://curl.haxx.se/mail/lib-2013-02/0004.html
Reported by: Stanislav Ivochkin
Fixed an issue where (lib)curl is compiled without support for a
supported challenge-response based SASL authentication mechanism, such
as CRAM-MD5 or NTLM, the server doesn't support the LOGIN or PLAIN
mechanisms and (lib)curl doesn't fallback to APOP or Clear Text
authentication.
Bug: http://curl.haxx.se/mail/lib-2013-02/0004.html
Reported by: Stanislav Ivochkin
Remove timeout argument that's never used.
Make the actual connection get detected on a single spot to reduce code
duplication.
Store the IPv6 state already when the connection is attempted.
There was a bug where, if SSLWrite() returned errSSLWouldBlock but did
succeed in transmitting at least something, then we'd incorrectly
resend the packet. Now we never take errSSLWouldBlock as a sign that
nothing was transferred to/from the server.
Bug: http://curl.haxx.se/mail/lib-2013-01/0295.html
Reported by: Bruno de Carvalho
Minor code tidy up to add comments similar to those used in the pop3
and imap end of resp functions, in order to assist anyone reading the
code and highlight the similarities between each of these protocols.
smtp_state_upgrade_tls() would attempt to incorrectly complete the
upgrade to smtps and start the EHLO command if
Curl_ssl_connect_nonblocking() returned a failure code and if ssldone
was set to TRUE. This would only happen when a non-blocking API hadn't
been provided by the SSL implementation and curlssl_connect() was
called underneath.
pop3_state_upgrade_tls() would attempt to incorrectly complete the
upgrade to pop3s and start the CAPA command if
Curl_ssl_connect_nonblocking() returned a failure code and if ssldone
was set to TRUE. This would only happen when a non-blocking API hadn't
been provided by the SSL implementation and curlssl_connect() was
called underneath.
imap_state_upgrade_tls() would attempt to incorrectly complete the
upgrade to imaps and start the CAPABILITY command if
Curl_ssl_connect_nonblocking() returned a failure code and if ssldone
was set to TRUE. This would only happen when a non-blocking API hadn't
been provided by the SSL implementation and curlssl_connect() was
called underneath.
- document the double-quote and backslash need be escaped if quoting.
- libcurl formdata escape double-quote in filename by backslash.
- curl formparse can parse filename both contains '"' and ',' or ';'.
- curl now can uploading file with ',' or ';' in filename.
Bug: http://curl.haxx.se/bug/view.cgi?id=1171
Fixed an issue where Curl_ssl_connect_nonblocking() wouldn't complete
correctly and the ssldone flag wouldn't be set to true for pop3s based
connections.
Bug introduced in commit: 4ffb8a6398.
Remove internal separated behavior of the easy vs multi intercace.
curl_easy_perform() is now using the multi interface itself.
Several minor multi interface quirks and bugs have been fixed in the
process.
Much help with debugging this has been provided by: Yang Tse
Fixes initial proxy response being processed by the tunneled protocol
handler instead of the HTTP wrapper handler. This issue would trigger
upon delayed CONNECT response from the proxy.
Additionally fixes a multi interface code-path in which connections
would not time out properly.
This does not fix known bug #39.
URL: http://curl.haxx.se/mail/lib-2013-01/0191.html
This commit fixes a regression introduced in 052a08ff.
NSS caches certs/keys returned by the SSL_GetClientAuthDataHook callback
and if we connect second time to the same server, the cached cert/key
pair is used. If we use multiple client certificates for different
paths on the same server, we need to clear the session cache to force
NSS to call the hook again. The commit 052a08ff prevented the session
cache from being cleared if a client certificate from file was used.
The condition is now fixed to cover both cases: consssl->client_nickname
is not NULL if a client certificate from the NSS database is used and
connssl->obj_clicert is not NULL if a client certificate from file is
used.
Review by: Kai Engert
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
1. When the downloaded data file from Mozilla is current, but the output
bundle does not exist: continue processing to create the bundle. The
goal is to have the output file - not just download the latest input.
2. added -f option to force re-processing the file. Useful for
debugging/testing the process.
3. added support for output to '-' (stdout), allowing the output to be
piped.
4. All progress and error messages go to STDERR rather than STDOUT (3)
5. The script opened and closed the output file many times
unnecessarily. It now opens it once, does the output and closes it.
6. Backup of the input files happens after successful processing, not
before.
7. The output is written to a temporary file, and renamed to the
requested name after backup - this greatly reduces the window where the
file can be seen partially written.
8. all die calls have a \n at the end to suppress perl's traceback - the
traceback isn't useful to end users.
Patch: http://curl.haxx.se/mail/lib-2013-01/0045.html
lib/objnames.inc provides definition of curl_10char_object_name() shell
function. The intended purpose of this function is to transliterate a
(*.c) source file name that may be longer than 10 characters, or not,
into a string with at most 10 characters which may be used as an OS/400
object name.
Test case 1221 does unit testng of this function and also verifies
that it is possible to generate distinct short object names for all
curl and libcurl *.c source file names.
lib/objnames-test.sh is the shell script used for test case 1221.
tests/runtests.pl modified to accept shell script test cases.
More details inside lib/objnames.inc and lib/objnames-test.sh
* Changing the order of the state machine to represent the order in
which commands are sent to the server.
* Reworking the imap_endofresp() function as the FETCH response doesn't
include the command id and shouldn't be part of the length comparison
that takes into account the id string.
Fixed a problem with the state machine when attempting to log in with
invalid credentials. The server would report login failure but libcurl
would not read the response due to inappropriate IMAP_STOP states being
set after the login was sent.
Applied some of the comment and layout changes that had already been
applied to the pop3 and smtp code over the last 6 to 9 months.
This is in preparation of adding SASL based authentication.
... on Snow Leopard and Lion
Snow Leopard introduced the SSLSetSessionOption() function, but it
doesn't disable peer verification as expected on Snow Leopard or
Lion (it works as expected in Mountain Lion). So we now use sysctl()
to detect whether or not the user is using Snow Leopard or Lion,
and if that's the case, then we now use the deprecated
SSLSetEnableCertVerify() function instead to disable peer verification.
... it also clobbered the 'result' return value so that it wouldn't
return the error back to the parent function properly, which broke test
809 when run with 'multi-always'.
When prefixing a path with /~/ it is supposed to be used relative to the
user's home directory but it didn't work. Now we cut off the entire
three byte sequenct "/~/" which seems to be how OpenSSH does it.
Bug: http://curl.haxx.se/bug/view.cgi?id=1173
Reported by: Balaji Parasuram
Issue: When building a 32bit target with large file support HP-UX
<sys/socket.h> header file may simultaneously provide two different
sets of declarations for sendfile and sendpath functions, one with
static and another with external linkage. Given that we do not use
mentioned functions we really don't care which linkage is the
appropriate one, but on the other hand, the double declaration emmits
warnings when using the HP-UX compiler and errors when using modern
gcc versions resulting in fatal compilation errors.
Mentioned issue is now fixed as long as we don't use sendfile nor
sendpath functions.
A bundle is a list of all persistent connections to the same host.
The connection cache consists of a hash of bundles, with the
hostname as the key.
The benefits may not be obvious, but they are two:
1) Faster search for connections to reuse, since the hash
lookup only finds connections to the host in question.
2) It lays out the groundworks for an upcoming patch,
which will introduce multiple HTTP pipelines.
This patch also removes the awkward list of "closure handles",
which were needed to send QUIT commands to the FTP server
when closing a connection.
Now we allocate a separate closure handle and use that
one to close all connections.
This has been tested in a live system for a few weeks, and of
course passes the test suite.
BLANK_AT_MAKETIME may be used in our Makefile.am files to blank
LIBS variable used in generated makefile at makefile processing
time. Doing this functionally prevents LIBS from being used for
all link targets in given makefile.
This handling already works with the easy-interface code. When a request
is sent on a re-used connection that gets closed by the server at the
same time as the request is sent, the situation may occur so that we can
send the request and we discover the broken connection as a RECV_ERROR
in the PERFORM state and then the request needs to be retried on a fresh
connection. Test 64 broke with 'multi-always-internally'.
Although it is not explicitly stated in the documentation, NSS uses
*pRetCert and *pRetKey even if the client authentication hook returns
a failure. Namely, if we destroy *pRetCert without clearing *pRetCert
afterwards, NSS destroys the certificate once again, which causes a
double free.
Reported by: Bob Relyea
.. that are sent when auth-negotiating before a chunked
upload or when setting the 'Transfer-Encoding: chunked'
header and intentionally sending no content.
Adjust test565 and test1333 accordingly.
DNS cache entries populated with CURLOPT_RESOLVE were not properly freed
again when done using the multi interface.
Test case 1502 added to verify.
Bug: http://curl.haxx.se/bug/view.cgi?id=3575448
Reported by: Alex Gruz
If we use memory functions (malloc, free, strdup etc) in C sources in
libcurl and we fail to include curl_memory.h or memdebug.h we either
fail to properly support user-provided memory callbacks or the memory
leak system of the test suite fails.
After Ajit's report of a failure in the first category in http_proxy.c,
I spotted a few in the second category as well. These problems are now
tested for by test 1132 which runs a perl program that scans for and
attempts to check that we use the correct include files if a memory
related function is used in the source code.
Reported by: Ajit Dhumale
Bug: http://curl.haxx.se/mail/lib-2012-11/0125.html
