Port number zero is perfectly allowed to connect to. I moved to storing
the remote port number in an int so that -1 means undefined and 0-65535
can be used for legitimate port numbers.
Setting the TIMER_STARTSINGLE timestamp first in CONNECT has the
drawback that for actions that go back to the CONNECT state, the time
stamp is reset and for the multi_socket API there's no corresponding
Curl_expire() then so the timeout logic gets wrong!
Reported-by: Brad Spencer
Bug: http://curl.haxx.se/mail/lib-2014-02/0036.html
Remove slash/backslash problem, now only slashes are used,
Wmake automaticaly translate slash/backslash to proper version or tools are not sensitive for it.
Enable spaces in path.
Use internal rm command for all host platforms
Add error message if old Open Watcom version is used. Some old versions exhibit build problems for Curl latest version. Now only versions 1.8, 1.9 and 2.O beta are supported
For HTTP/2, we may read up everything including responde body with
header fields in Curl_http_readwrite_headers. If no content-length is
provided, curl waits for the connection close, which we emulate it
using conn->proto.httpc.closed = TRUE. The thing is if we read
everything, then http2_recv won't be called and we cannot signal the
HTTP/2 stream has closed. As a workaround, we return nonzero from
data_pending to call http2_recv.
Original commit message was:
Don't omit CN verification in SChannel when an IP address is used.
Side-effect of this change:
SChannel and CryptoAPI do not support the iPAddress subjectAltName
according to RFC 2818. If present, SChannel will first compare the
IP address to the dNSName subjectAltNames and then fallback to the
most specific Common Name in the Subject field of the certificate.
This means that after this change curl will not connect to SSL/TLS
hosts as long as the IP address is not specified in the SAN or CN
of the server certificate or the verifyhost option is disabled.
This patch enables HTTP POST/PUT in HTTP2.
We disabled Expect header field and chunked transfer encoding
since HTTP2 forbids them.
In HTTP1, Curl sends small upload data with request headers, but
HTTP2 requires upload data must be in DATA frame separately.
So we added some conditionals to achieve this.
Perform more work in between sleeps. This is work around the
fact that axtls does not expose any knowledge about when work needs
to be performed. Depending on connection and how often perform is
being called this can save ~25% of time on SSL handshakes (measured
on 20ms latency connection calling perform roughly every 10ms).
When allowing NTLM, the re-use connection logic was too focused on
finding an existing NTLM connection to use and didn't properly allow
re-use of other ones. This made the logic not re-use perfectly re-usable
connections.
Added test case 1418 and 1419 to verify.
Regression brought in 8ae35102c (curl 7.35.0)
Reported-by: Jeff King
Bug: http://thread.gmane.org/gmane.comp.version-control.git/242213
For a function that returns a decoded version of a string, it seems
really strange to allow a NULL pointer to get passed in which then
prevents the decoded data from being returned!
This functionality was not documented anywhere either.
If anyone would use it that way, that memory would've been leaked.
Bug: https://github.com/bagder/curl/pull/90
Reported-by: Arvid Norberg
Make sure that the special NTLM magic we do is for HTTP+NTLM only since
that's where the authenticated connection is a weird non-standard
paradigm.
Regression brought in 8ae35102c (curl 7.35.0)
Bug: http://curl.haxx.se/mail/lib-2014-02/0100.html
Reported-by: Dan Fandrich
The code didn't properly check the return codes to detect overflows so
it could trigger incorrectly. Like on mingw32.
Regression introduced in 345891edba (curl 7.35.0)
Bug: http://curl.haxx.se/mail/lib-2014-02/0097.html
Reported-by: LM
when using --http2 one can now selectively disable NPN or ALPN with
--no-alpn and --no-npn. for now honored with NSS only.
TODO: honor this option with GnuTLS and OpenSSL
SSL_ENABLE_ALPN can be used for preprocessor ALPN feature detection,
but not SSL_NEXT_PROTO_SELECTED, since it is an enum value and not a
preprocessor macro.
Not comma, which is an inconsistency and a mistake probably inherited
from the examples section of RFC1867.
This bug has been present since the day curl started to support
multipart formposts, back in the 90s.
Reported-by: Rob Davies
Bug: http://curl.haxx.se/bug/view.cgi?id=1333
When using the multi socket interface, libcurl calls the
curl_multi_timer_callback asking to be woken up after
CURL_TIMEOUT_EXPECT_100 milliseconds.
After the timeout has expired, calling curl_multi_socket_action with
CURL_SOCKET_TIMEOUT as sockfd leads libcurl to check expired
timeouts. When handling the 100-continue one, the following check in
Curl_readwrite() fails if exactly CURL_TIMEOUT_EXPECT_100 milliseconds
passed since the timeout has been set!
It seems logical to consider that having waited for exactly
CURL_TIMEOUT_EXPECT_100 ms is enough.
Bug: http://curl.haxx.se/bug/view.cgi?id=1334
A server might respond with a content-encoding header and a response
that was encoded accordingly in HTTP-draft-09/2.0 mode, even if the
client did not send an accept-encoding header earlier. The server might
not send a content-encoding header if the identity encoding was used to
encode the response.
See:
http://tools.ietf.org/html/draft-ietf-httpbis-http2-09#section-9.3
This patch chooses different approach to integrate HTTP2 into HTTP curl
stack. The idea is that we insert HTTP2 layer between HTTP code and
socket(TLS) layer. When HTTP2 is initialized (either in NPN or Upgrade),
we replace the Curl_recv/Curl_send callbacks with HTTP2's, but keep the
original callbacks in http_conn struct. When sending serialized data by
nghttp2, we use original Curl_send callback. Likewise, when reading data
from network, we use original Curl_recv callback. In this way we can
treat both TLS and non-TLS connections.
With this patch, one can transfer contents from https://twitter.com and
from nghttp2 test server in plain HTTP as well.
The code still has rough edges. The notable one is I could not figure
out how to call nghttp2_session_send() when underlying socket is
writable.
Check the NPN result before preparing an HTTP request and switch into
HTTP/2.0 mode if necessary. This is a work in progress, the actual code
to prepare and send the request using nghttp2 is still missing from
Curl_http2_send_request().
the number of elements in the 'nghttp2_session_callbacks' structure is
now reduced by 2 in version 0.3.0 (I'm not sure when the change
happened, but checking for ver 0.3.0 work for me).
Something is wrong in 'userp' for the HTTP2 recv_callback(). The
session is created using bogus user-data; '&conn' and not 'conn'.
I noticed this since the socket-value in Curl_read_plain() was set to a
impossible high value.
hostcache_timestamp_remove() should remove old *unused* entries from the
host cache, but it never checked whether the entry was actually in
use. This complements commit 030a2b8cb.
Bug: http://curl.haxx.se/bug/view.cgi?id=1327
tftp_done() can get called with its TFTP state pointer still being NULL
on an early time-out, which caused a segfault when dereferenced.
Reported-by: Glenn Sheridan
Bug: http://curl.haxx.se/mail/lib-2014-01/0246.html
Make it possible to call
curl_easy_getinfo(curl, CURLINFO_CONTENT_LENGTH_DOWNLOAD, &filesize)
and related functions on remote sftp:// files, without downloading them.
Reported-by: Yingwei Liu
Bug: http://curl.haxx.se/mail/lib-2014-01/0139.html
This prevents sending a `Content-Length: -1` header, e.g this ocurred
with the following combination:
* standard HTTP POST (no chunked encoding),
* user-defined read function set,
* `CURLOPT_POSTFIELDSIZE(_LARGE)` NOT set.
With this fix it now behaves like HTTP PUT.
Make GnuTLS old and new consistent, specify the desired protocol, cipher
and certificate type in always in both modes. Disable insecure ciphers
as reported by howsmyssl.com. Honor not only --sslv3, but also the
--tlsv1[.N] switches.
Related Bug: http://curl.haxx.se/bug/view.cgi?id=1323
conversion from 'curl_off_t' to 'size_t', possible loss of data
Where curl_off_t is a 64-bit word and size_t is 32-bit - for example
with 32-bit Windows builds.
1 - allow >31 bit max-age values
2 - don't overflow on extremely large max-age values when we add the
value to the current time
3 - make sure max-age takes precedence over expires as dictated by
RFC6265
Bug: http://curl.haxx.se/mail/lib-2014-01/0130.html
Reported-by: Chen Prog
Starting with Visual Studio 2013 (VC12) and Windows 8.1 the
GetVersionInfoEx() function has been marked as deprecated and it's
return value atered. Updated connect.c and curl_sspi.c to use
VerifyVersionInfo() where possible, which has been available since
Windows 2000.
A transfer timeout could result in an error message such as "Operation
timed out after 3000 milliseconds with 19 bytes of -1 received". This
patch removes the non-sensical "of -1" when the size of the transfer
is unknown, mirroring the logic in lib/transfer.c
By default even recent versions of OpenSSL support and accept both
"export strength" ciphers, small-bitsize ciphers as well as downright
deprecated ones.
This change sets a default cipher set that avoids the worst ciphers, and
subsequently makes https://www.howsmyssl.com/a/check no longer grade
curl/OpenSSL connects as 'Bad'.
Bug: http://curl.haxx.se/bug/view.cgi?id=1323
Reported-by: Jeff Hodges
With the recently added timeout "reminder" functionality, there's no
reason left for us to execute timeout code before the time is
ripe. Simplifies the handling too.
This will make the *TIMEOUT and *CONNECTTIMEOUT options more accurate
again, which probably is most important when the *_MS versions are used.
In multi_socket, make sure to update 'now' after having handled activity
on a socket.
BACKGROUND:
We have learned that on some systems timeout timers are inaccurate and
might occasionally fire off too early. To make the multi_socket API work
with this, we made libcurl execute timeout actions a bit early too if
they are within our MULTI_TIMEOUT_INACCURACY. (added in commit
2c72732ebf, present since 7.21.0)
Switching everything to the multi API made this inaccuracy problem
slightly more notable as now everyone can be affected.
Recently (commit 21091549c0) we tweaked that inaccuracy value to make
timeouts more accurate and made it platform specific. We also figured
out that we have code at places that check for fixed timeout values so
they MUST NOT run too early as then they will not trigger at all (see
commit be28223f35 and a691e04470) - so there are definitately problems
with running timeouts before they're supposed to run. (We've handled
that so far by adding the inaccuracy margin to those specific timeouts.)
The libcurl multi_socket API tells the application with a callback that
a timeout expires in N milliseconds (and it explicitly will not tell it
again for the same timeout), and the application is then supposed to
call libcurl when that timeout expires. When libcurl subsequently gets
called with curl_multi_socket_action(...CURL_SOCKET_TIMEOUT...), it
knows that the application thinks the timeout expired - and alas, if it
is within the inaccuracy level libcurl will run code handling that
handle.
If the application says CURL_SOCKET_TIMEOUT to libcurl and _isn't_
within the inaccuracy level, libcurl will not consider the timeout
expired and it will not tell the application again since the timeout
value is still the same.
NOW:
This change introduces a modified behavior here. If the application says
CURL_SOCKET_TIMEOUT and libcurl finds no timeout code to run, it will
inform the application about the timeout value - *again* even if it is
the same timeout that it already told about before (although libcurl
will of course tell it the updated time so that it'll still get the
correct remaining time). This way, we will not risk that the application
believes it has done its job and libcurl thinks the time hasn't come yet
to run any code and both just sit waiting. This also allows us to
decrease the MULTI_TIMEOUT_INACCURACY margin, but that will be handled
in a separate commit.
A repeated timeout update to the application risk that the timeout will
then fire again immediately and we have what basically is a busy-loop
until the time is fine even for libcurl. If that becomes a problem, we
need to address it.
The net effect of this bug as it appeared to users, would be that
libcurl would timeout in the connect phase.
When disabling IPv6 use but still using getaddrinfo, libcurl would
wrongly not init the "hints" struct field in init_thread_sync() which
would subsequently lead to a getaddrinfo() invoke with a zeroed hints
with ai_socktype set to 0 instead of SOCK_STREAM. This would lead to
different behaviors on different platforms but basically incorrect
output.
This code was introduced in 483ff1ca75, released in curl 7.20.0.
This bug became a problem now due to the happy eyeballs code and how
libcurl now traverses the getaddrinfo() results differently.
Bug: http://curl.haxx.se/mail/lib-2014-01/0061.html
Reported-by: Fabian Frank
Debugged-by: Fabian Frank
Removed some of the infof() calls that were added with the recent
pipeline improvements but they're not useful to the vast majority of
readers and the pipelining seems to fundamentaly work - the debugging
outputs can easily be added there if debugging these functions is needed
again.
When the requested authentication bitmask includes NTLM, we cannot
re-use a connection for another username/password as we then risk
re-using NTLM (connection-based auth).
This has the unfortunate downside that if you include NTLM as a possible
auth, you cannot re-use connections for other usernames/passwords even
if NTLM doesn't end up the auth type used.
Reported-by: Paras S
Patched-by: Paras S
Bug: http://curl.haxx.se/mail/lib-2014-01/0046.html
When the progress callback returned 1 at a very early state, the code
would not make CURLE_ABORTED_BY_CALLBACK get returned but the process
would still be interrupted. In the HTTP case, this would then cause a
CURLE_GOT_NOTHING to erroneously get returned instead.
Reported-by: Petr Novak
Bug: http://curl.haxx.se/bug/view.cgi?id=1318
This is a debug function only and serves no purpose in production code,
it only slows things down. I left the code #ifdef'ed for possible future
pipeline debugging.
Also, this was a global function without proper namespace usage.
Reported-by: He Qin
Bug: http://curl.haxx.se/bug/view.cgi?id=1320
If OpenSSL is built to support SSLv2 this brings back the ability to
explicitly select that as a protocol level.
Reported-by: Steve Holme
Bug: http://curl.haxx.se/mail/lib-2014-01/0013.html
Some feedback provided by byte_bucket on IRC pointed out that commit
db11750cfa wasn’t really correct because it allows for “upgrading” to a
newer protocol when it should be only allowing for SSLv3.
This change fixes that.
When SSLv3 connection is forced, don't allow SSL negotiations for newer
versions. Feedback provided by byte_bucket in #curl. This behavior is
also consistent with the other force flags like --tlsv1.1 which doesn't
allow for TLSv1.2 negotiation, etc
Feedback-by: byte_bucket
Bug: http://curl.haxx.se/bug/view.cgi?id=1319
Since ad34a2d5c8 (present in 7.34.0 release) forcing
SSLv3 will always return the error "curl: (35) Unsupported SSL protocol
version" Can be replicated with `curl -I -3 https://www.google.com/`.
This fix simply allows for v3 to be forced.
Following commit 0aafd77fa4, replaced the internal usage of
FORMAT_OFF_T and FORMAT_OFF_TU with the external versions that we
expect API programmers to use.
This negates the need for separate definitions which were subtly
different under different platforms/compilers.
Added support to the built-in printf() replacement functions, for these
non-ANSI extensions when compiling under Visual Studio, Borland, Watcom
and MinGW.
This fixes problems when generating libcurl source code that contains
curl_off_t variables.
Fixes a bug when all addresses in the first family fail immediately, due
to "Network unreachable" for example, curl would hang and never try the
next address family.
Iterate through all address families when to trying establish the first
connection attempt.
Bug: http://curl.haxx.se/bug/view.cgi?id=1315
Reported-by: Michal Górny and Anthony G. Basile
Introduced in commit 2a4ee0d221 sending of data via the FILE
protocol would always return CURLE_WRITE_ERROR regardless of whether
CURL_WRITEFUNC_PAUSE was returned from the callback function or not.
Make sure that we detect such attempts and return a proper error code
instead of silently handling this in problematic ways.
Updated the documentation to mention this limitation.
Bug: http://curl.haxx.se/bug/view.cgi?id=1286
Previously this memdebug free() replacement didn't properly work with a
NULL argument which has made us write code that avoids calling
free(NULL) - which causes some extra nuisance and unnecessary code.
Starting now, we should allow free(NULL) even when built with the
memdebug system enabled.
free(NULL) is permitted by POSIX
free() itself allows a NULL input but our memory debug system requires
Curl_safefree() to be used instead when a "legitimate" NULL may be freed. Like
in the code here.
Pointed-out-by: Steve Holme
If a user indicated they preferred to authenticate using a SASL
mechanism, but SASL authentication wasn't supported by the server, curl
would always fall back to clear text when CAPABILITY wasn't supported,
even though the user didn't want to use this.
If a user indicated they preferred to authenticate using APOP or a SASL
mechanism, but neither were supported by the server, curl would always
fall back to clear text when CAPA wasn't supported, even though the
user didn't want to use this.
This also fixes the auto build failure caused by commit 6f2d5f0562.
This commit replaces that of 9f260b5d66 because according to RFC-2449,
section 6, there is no APOP capability "...even though APOP is an
optional command in [POP3]. Clients discover server support of APOP by
the presence in the greeting banner of an initial challenge enclosed in
angle brackets."
The FILE:// code doesn't support this option - and it doesn't make sense
to support it as long as it works as it does since then it'd only block
even longer.
But: setting CURLOPT_MAX_RECV_SPEED_LARGE would make the transfer first
get done and then libcurl would wait until the average speed would get
low enough. This happened because the transfer happens completely in the
DO state for FILE:// but then it would still unconditionally continue in
to the PERFORM state where the speed check is made.
Starting now, the code will skip from DO_DONE to DONE immediately if no
socket is set to be recv()ed or send()ed to.
Bug: http://curl.haxx.se/bug/view.cgi?id=1312
Reported-by: Mohammad AlSaleh
The comment in the code mentions the zero terminating after having
copied data, but it mistakingly zero terminated the source data and not
the destination! This caused the test 864 problem discussed on the list:
http://curl.haxx.se/mail/lib-2013-12/0113.html
Signed-off-by: Daniel Stenberg <daniel@haxx.se>
Although highlighted by a bug in commit 1cfb436a2f, APOP
authentication could be chosen if the server was to reply with an empty
or missing timestamp in the server greeting and APOP was given in the
capability list by the server.
Added a loop to pop3_statemach_act() in which Curl_pp_readresp() is
called until the cache is drained. Without this multiple responses
received in a single packet could result in a hang or delay.
Similar to the processing of untagged CAPABILITY responses in IMAP and
multi-line EHLO responses in SMTP, moved the processing of multi-line
CAPA responses to pop3_state_capa_resp().
In an effort to reduce what pop3_endofresp() does and bring the POP3
source back inline with the IMAP and SMTP protocols, moved the APOP
detection into pop3_state_servergreet_resp().
Added support for downgrading the SASL authentication mechanism when the
decoding of CRAM-MD5, DIGEST-MD5 and NTLM messages fails. This enhances
the previously added support for graceful cancellation by allowing the
client to retry a lesser SASL mechanism such as LOGIN or PLAIN, or even
APOP / clear text (in the case of POP3 and IMAP) when supported by the
server.
In preparation for the upcoming SASL downgrade feature renamed the
imap__perform_authenticate(), pop3__perform_authenticate() and
smtp__perform_authenticate() functions.
Security flaw CVE-2013-6422
This is conceptually the same problem and fix that 3c3622b6 brought to the
OpenSSL backend and that resulted in CVE-2013-4545.
This version of the problem was independently introduced to the GnuTLS
backend with commit 59cf93cc, present in the code since the libcurl
7.21.4 release.
Advisory: http://curl.haxx.se/docs/adv_20131217.html
Bug: http://curl.haxx.se/mail/lib-2013-11/0214.html
Reported-by: Marc Deslauriers
Since all systems have inaccuracy in the timeout handling it is
imperative that we add an inaccuracy margin to the general timeout and
connecttimeout handling with the multi interface. This way, when the
timeout fires we should be fairly sure that it has passed the timeout
value and will be suitably detected.
For cases where the timeout fire before the actual timeout, we would
otherwise consume the timeout action and still not run the timeout code
since the condition wasn't met.
Reported-by: He Qin
Bug: http://curl.haxx.se/bug/view.cgi?id=1298
To avoid the regression when users pass in passwords containing semi-
colons, we now drop the ability to set the login options with the same
options. Support for login options in CURLOPT_USERPWD was added in
7.31.0.
Test case 83 was modified to verify that colons and semi-colons can be
used as part of the password when using -u (CURLOPT_USERPWD).
Bug: http://curl.haxx.se/bug/view.cgi?id=1311
Reported-by: Petr Bahula
Assisted-by: Steve Holme
Signed-off-by: Daniel Stenberg <daniel@haxx.se>
It is not 100% clear whether * should include clear text LOGIN or not
from RFC-5092, however, including it is then consistent with current
POP3 behaviour where clear text, APOP or SASL may be chosen.
If a specific SASL authentication mechanism was requested by the user
as part of the login options but wasn't supported by the server then
curl would fallback to clear text, when it shouldn't, rather than
reporting "No known authentication mechanisms supported" as the POP3
and SMTP protocols do.
In C, signed integer overflow is undefined behavior. Thus, the compiler
is allowed to assume that it will not occur. In the check for an
overflow, the developer assumes that the signed integer of type time_t
will wrap around if it overflows. However, this behavior is undefined in
the C standard. Thus, when the compiler sees this, it simplifies t +
delta < t to delta < 0. Since delta > 0 and delta < 0 can't both be
true, the entire if statement is optimized out under certain
optimization levels. Thus, the parsedate function would return
PARSEDATE_OK with an undefined value in the time, instead of return -1 =
PARSEDATE_FAIL.
The comment here says that SecKeychainSearch causes a deprecation
warning when used with a minimum Mac OS X SDK version of 10.7.0, which
is correct. However, the #if guard did not match. It was intended to
only use the code if 10.6.0 support was enabled, but it had 10.7.0
instead. This caused a warning if the minimum was exactly 10.7.0.
The URI that is passed in as part of the Authorization: header needs to
be cut off at '?' if CURLAUTH_DIGEST_IE is set. Previously the code only
did when calculating the MD5sum.
Bug: http://curl.haxx.se/bug/view.cgi?id=1308
Patched-by: Sergey Tatarincev
POP3_TYPE_ANY, or ~0, is written to pop3c->preftype in lib/pop3c.c, an
unsigned int variable. The result of ~0 is -1, which caused a warning
due to writing a negative number to an unsigned variable. To fix this,
make the expression ~0U so that its value is considered the unsigned
number UINT_MAX which is what SASL_AUTH_ANY does in curl_sasl.h.
1) Renamed curl_tlsinfo to curl_tlssessioninfo as discussed on the
mailing list.
2) Renamed curl_ssl_backend to curl_sslbackend so it doesn't follow our
function naming convention.
3) Updated sessioninfo.c example accordingly.
This fixes a NULL dereference in the case where the client asks for
CURLINFO_TLS_SESSION data after the (TLS) session has already been
destroyed (i.e. curl_easy_perform has already completed for this
handle). Instead of crashing, we now return a CURLSSLBACKEND_NONE
error.
This is an extension to the fix in 7d80ed64e4. We may
call Curl_disconnect() while cleaning up the multi handle,
which could lead to openssl sending packets, which could get
a SIGPIPE.
Signed-off-by: Jeff King <peff@peff.net>
Commit 7d80ed64e4 introduced some helpers to handle
sigpipe in easy.c. However, that fix was incomplete, and we
need to add more callers in other files. The first step is
making the helpers globally accessible.
Since the functions are small and should generally end up
inlined anyway, we simply define them in the header as
static functions.
Signed-off-by: Jeff King <peff@peff.net>
This fixes a rare Happy Eyeballs bug where if the first IP family runs
out of addresses before the second-family-timer fires, and the second
IP family's first connect fails immediately, no further IPs of the
second family are attempted.
When adding entries to the DNS cache with CURLOPT_RESOLVE, they are
marked 'inuse' forever to prevent them from ever being removed in normal
operations. Still, the code that pruned out-of-date DNS entries didn't
care for the 'inuse' struct field and pruned it anyway!
Reported-by: Romulo A. Ceccon
Bug: http://curl.haxx.se/bug/view.cgi?id=1303
Added new API for returning a SSL backend type and pointer, in order to
allow access to the TLS internals, that may then be used to obtain X509
certificate information for example.
Otherwise a NOOP operation would be performed which a) only returns a
single line response and not a multiline response where -I needs to be
used, and b) provides an inconsistent user experience compared to that
of the POP3 and IMAP protocols.
singleipconnect() could return the file descriptor of an open socket
even though the function returned a CURLE_COULDNT_CONNECT error code
from commit ed1662c374 and 02fbc26d59.
This could cause tests 19, 704 and 1233 to fail on FreeBSD, AIX and
Solaris.
Incorrectly processed multiline server greeting responses as "wanted"
continue responses in smtp_endofresp(), from commit f16c0de4e9,
which in turn broke the SMTP server detection in the test suite,
because the EHLO command would not be sent.
Added a loop to smtp_statemach_act() in which Curl_pp_readresp() is
called until the cache is drained. Without this multiple responses
received in a single packet could result in a hang or delay.
Similar to the processing of untagged CAPABILITY responses in IMAP moved
the processing of multiline EHLO responses to smtp_state_ehlo_resp() and
introduced an internal response code of one to differentiate a multiline
continuation from the end of command. This also allows for the separate
processing of multiline responses from commands such as VRFY and EXPN.
singleipconnect() did not return the open socket descriptor on some
errors, thereby sometimes causing a socket leak. This patch ensures
the socket is always returned.
Even though this is only a formality (since not many people build on
Mavericks while targeting Leopard), since we still support Leopard
at the earliest, we might as well be pedantic.
It turns out that some of the constants necessary to make this feature
work are missing from Snow Leopard's Security framework even though
they are defined in the headers.
Bug: http://curl.haxx.se/mail/lib-2013-11/0076.html
Reported by: myriachan
Rather than set the authentication options as part of the login details
specified in the URL, or via the older CURLOPT_USERPWD option, added a
new libcurl option to allow the login options to be set separately.
This patch fixes and issue introduced in commit 7d7df83198, if the
tunnel state was TUNNEL_CONNECT, waitconnect_getsock() would return a
bitmask indicating a readable socket but never stored the socket in the
return array.
Our own printf() replacement clearly can't properly handle %.*s with a
string that isn't zero terminated. Instead of fixing the printf code or
even figuring out what the proper posix behavior is, I reverted this
piece of the code back to the previous version where it does malloc +
memcpy instead.
Regression added in e839446c2a, released in curl 7.32.0.
Reported-by: Felix Yan
Bug: http://curl.haxx.se/bug/view.cgi?id=1295
This patch adds a 200ms delay between the first and second address
family socket connection attempts.
It also iterates over IP addresses in the order returned by the
system, meaning most dual-stack systems will try IPv6 first.
Additionally, it refactors the connect code, removing most code that
handled synchronous connects. Since all sockets are now non-blocking,
the logic can be made simpler.
nss.c:702: warning: pointer targets in passing argument 3 of
'Curl_extract_certinfo' differ in signedness
nss.c:702: warning: pointer targets in passing argument 4 of
'Curl_extract_certinfo' differ in signedness
Made sure the cast was correctly "unsigned char *" to "char *" and not
"unsigned char *" to "unsigned char *".
nss.c:700: warning: pointer targets in passing argument 3 of
'Curl_extract_certinfo' differ in signedness
nss.c:700: warning: pointer targets in passing argument 4 of
'Curl_extract_certinfo' differ in signedness
Introduced in commit 7d7df83198 curl would loop displaying "Whut?"
if it was trying to connect to an address and port that didn't have
anything listening on it.
Renamed copy_header_value() to Curl_copy_header_value() as this
function is now non static.
Simplified proxy flag in Curl_http_input_auth() when calling
sub-functions.
Removed unnecessary white space removal when using negotiate as it had
been missed in commit cdccb42267.
...following recent changes to Curl_base64_decode() rather than trying
to parse a header line for the authentication mechanisms which is CRLF
terminated and inline zero terminate it.
...following recent changes to Curl_base64_decode() rather than trying
to parse a header line for the authentication mechanisms which is CRLF
terminated and inline zero terminate it.
The code rejected 0 as a valid timeout while in fact the function could
indeed legitimately return that and it should be respected.
Reported-by: Bjorn Stenberg
A base64 string should be a multiple of 4 characters in length, not
contain any more than 2 padding characters and only contain padding
characters at the end of string. For example: Y3VybA==
Strings such as the following are considered invalid:
Y= - Invalid length
Y== - Invalid length
Y=== - More than two padding characters
Y=x= - Padding character contained within string
This patch fixes a bug in Happy Eyeballs where curl would wait for a
connect response from socket1 before checking socket2.
Also, it updates error messages for failed connections, showing the ip
addresses that failed rather than just the host name repeatedly.
Bug: http://curl.haxx.se/mail/lib-2013-10/0236.html
Reported-by: Paul Marks
This patch invokes two socket connect()s nearly simultaneously, and
the socket that is first connected "wins" and is subsequently used for
the connection. The other is terminated.
There is a very slight IPv4 preference, in that if both sockets connect
simultaneously IPv4 is checked first and thus will win.
Should a client application fail to decode an authentication message
received from a server, or not support any of the parameters given by
the server in the message, then the authentication phrase should be
cancelled gracefully by the client rather than simply terminating the
connection.
The authentication phrase should be cancelled by simply sending a '*'
to the server, in response to erroneous data being received, as per
RFC-3501, RFC-4954 and RFC-5034.
This patch adds the necessary state machine constants and appropriate
response handlers in order to add this functionality for the CRAM-MD5,
DIGEST-MD5 and NTLM authentication mechanisms.
This is a regression since the switch to always-multi internally
c43127414d.
Test 1316 was modified since we now clearly call the Curl_client_write()
function when doing the LIST transfer part and then the
handler->protocol says FTP and ftpc.transfertype is 'A' which implies
text converting even though that the response is initially a HTTP
CONNECT response in this case.
This workaround had been previously been implemented for IMAP and POP3
but not SMTP. Some of the recent test case additions implemented this
behaviour to emulate a bad server and the SMTP code didn't cope with it.
... if not already initialized. This fixes a regression introduced by
commit 4ad8e142da, which caused test619
to intermittently fail on certain machines (namely Fedora build hosts).
Changed the failure code when TLS v1.1 and v1.2 is requested but not
supported by older OpenSSL versions, following review from libcurl
peers, and reduced the number of required preprocessor if statements.
...with the use of CURL_SSLVERSION_TLSv1_1 and CURL_SSLVERSION_TLSv1_2
being conditional on OpenSSL v1.0.1 as the appropriate flags are not
supported under earlier versions.
Commit ad34a2d5c8 relies on definitions that are only present in
OpenSSL v1.0.1 and up. This quick fix allows the builds that use
older versions of OpenSSL to continue building.
According to the documentation for libssh2_userauth_list(), a NULL
return value is not necessarily an error. You must call
libssh2_userauth_authenticated() to determine if the SSH_USERAUTH_NONE
request was successful.
This fixes a segv when using sftp on a server that allows logins with an
empty password. When NULL was interpreted as an error, it would
free the session but not flag an error since the libssh2 errno would be
clear. This resulted in dereferencing a NULL session pointer.
Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
CURL_SSLVERSION_TLSv1_0, CURL_SSLVERSION_TLSv1_1,
CURL_SSLVERSION_TLSv1_2 enum values are added to force exact TLS version
(CURL_SSLVERSION_TLSv1 means TLS 1.x).
axTLS:
axTLS only supports TLS 1.0 and 1.1 but it cannot be set that only one
of these should be used, so we don't allow the new enum values.
darwinssl:
Added support for the new enum values.
SChannel:
Added support for the new enum values.
CyaSSL:
Added support for the new enum values.
Bug: The original CURL_SSLVERSION_TLSv1 value enables only TLS 1.0 (it
did the same before this commit), because CyaSSL cannot be configured to
use TLS 1.0-1.2.
GSKit:
GSKit doesn't seem to support TLS 1.1 and TLS 1.2, so we do not allow
those values.
Bugfix: There was a typo that caused wrong SSL versions to be passed to
GSKit.
NSS:
TLS minor version cannot be set, so we don't allow the new enum values.
QsoSSL:
TLS minor version cannot be set, so we don't allow the new enum values.
OpenSSL:
Added support for the new enum values.
Bugfix: The original CURL_SSLVERSION_TLSv1 value enabled only TLS 1.0,
now it enables 1.0-1.2.
Command-line tool:
Added command line options for the new values.
Setting only CURLOPT_SSL_VERIFYHOST without CURLOPT_SSL_VERIFYPEER set
should still verify that the host name fields in the server certificate
is fine or return failure.
Bug: http://curl.haxx.se/mail/lib-2013-10/0002.html
Reported-by: Ishan SinghLevett
If no WINVER and/or _WIN32_IWNNT define was set, the Windows platform
SDK often defaults to high value, e.g. 0x601 (whoch may probably depend
on the Windows version being used, in my case Windows 7).
If WINVER >= 0x600 then winsock2.h includes some defines for WSAPoll(),
e.g. POLLIN, POLLPRI, POLLOUT etc. These defines clash with cURL's
lib/select.h.
Make sure HAVE_STRUCT_POLLFD is defined then.
Bug: http://curl.haxx.se/bug/view.cgi?id=1282
Reported-by: "kdekker"
Patch-by: Marcel Raad
Moved the standard SASL mechanism strings into curl_sasl.h rather than
hard coding the same values over and over again in the protocols that
use SASL authentication.
For more information about the mechanism strings see:
http://www.iana.org/assignments/sasl-mechanisms
In ossl_connect_step2() when the "Unknown SSL protocol error" occurs, it
would output the local port number instead of the remote one which
showed when doing SSL over a proxy (but with the correct remote host
name). As libcurl only speaks SSL to the remote we know it is the remote
port.
Bug: http://curl.haxx.se/bug/view.cgi?id=1281
Reported-by: Gordon Marler
Added the ability to use an XOAUTH2 bearer token [RFC6750] with POP3 for
authentication using RFC6749 "OAuth 2.0 Authorization Framework".
The bearer token is expected to be valid for the user specified in
conn->user. If CURLOPT_XOAUTH2_BEARER is defined and the connection has
an advertised auth mechanism of "XOAUTH2", the user and access token are
formatted as a base64 encoded string and sent to the server as
"AUTH XOAUTH2 <bearer token>".
iOS 7 finally added the option to enable 1/n-1 when using TLS 1.0
and a CBC cipher, so we now always turn that on unless the user
manually turns it off using CURLSSLOPT_ALLOW_BEAST.
It appears Apple also added some new PSK ciphers, but no interface to
use them yet, so we at least support printing them if we find them.
Implement: Expired Cookies These following situation, curl removes
cookie(s) from struct CookieInfo if the cookie expired.
- Curl_cookie_add()
- Curl_cookie_getlist()
- cookie_output()
Solaris with the SunStudio Compiler is reportedly missing this define,
but as we're using it without any good reason on all the places it was
used I've now instead switched to just use sensible buffer sizes that
fit a 32 bit decimal number. Which also happens to be smaller than the
common NI_MAXSERV value which is 32 on most machines.
Bug: http://curl.haxx.se/bug/view.cgi?id=1277
Reported-by: D.Flinkmann
Otherwise, the FTP protocol would unnecessarily hang 60 seconds if
aborted in the CURLOPT_HEADERFUNCTION callback.
Reported by: Tomas Mlcoch
Bug: https://bugzilla.redhat.com/1005686
Make sure that the custom struct fields are only used by code that
doesn't use a struct defintion from the outside.
Attempts to fix the problem introduced in 3dc6fc42bf
Otherwise the connection can get stuck during various phases, waiting
for new data on the socket using select() etc., but it will never be
received as the data has already been read into SSL library.
The transfer size would be calculated incorrectly if the email contained
within the FETCH response, had been partially received by the pingpong
layer. As such the following, example output, would be seen if the
amount remaining was smaller than the amount received:
* Excess found in a non pipelined read: excess = 1394, size = 262,
maxdownload = 262, bytecount = 1374
* transfer closed with -1112 bytes remaining to read
Bug: http://curl.haxx.se/mail/lib-2013-08/0170.html
Reported-by: John Dunn
When building the code using LLVM Clang without NGHTTP2, I was getting
this warning:
../lib/http.h:155:1: warning: empty struct is a GNU extension [-Wgnu]
Placing a dummy variable into the data structure silenced the warning.
Recent OpenSSL uses user interface abstraction to negotiate access to
private keys in the cryprographical engines. An OpenSSL application is
expected to implement the user interface. Otherwise a default one
provided by OpenSSL (interactive standard I/O) will be used and the
aplication will have no way how to pass a password to the engine.
Longer-desc: http://curl.haxx.se/mail/lib-2013-08/0265.html
Using the first little merge of nghttp2 into libcurl, I stumbeled on the
missing 'snprintf' in MSVCRT. Isn't this how we do it for other libcurl
files? I.e. use 'curl_msnprintf' and not 'snprintf' directly:
When an error occurs parsing an LDAP URL, The ludp->lud_attrs[i] entries
could be freed even though they sometimes point to data within an
allocated area.
This change introduces a lud_attrs_dup[] array for the duplicated string
pointers, and it removes the unused lud_exts array.
Bug: http://curl.haxx.se/mail/lib-2013-08/0209.html
XOAUTH2 would be selected in preference to LOGIN and PLAIN if the IMAP
or SMTP server advertised support for it even though a user's password
was supplied but bearer token wasn't.
Modified the selection logic so that XOAUTH2 will only be selected if
the server supports it and A) The curl user/libcurl programmer has
specifically asked for XOAUTH via the ;AUTH=XOAUTH login option or 2)
The bearer token is specified. Obviously if XOAUTH is asked for via
the login option but no token is specified the user will receive a
authentication failure which makes more sense than no known
authentication mechanisms supported!
'struct monitor', introduced in 6cf8413e, already exists in an IRIX
header file (sys/mon.h) which gets included via various standard headers
by lib/easy.c
cc-1101 cc: ERROR File = ../../curl/lib/easy.c, Line = 458
"monitor" has already been declared in the current scope.
Reported-by: Tor Arntsen
When waiting for a 100-continue response from the server, the
Curl_readwrite() will refuse to run if called until the timeout has been
reached.
We timeout code in multi_socket() allows code to run slightly before the
actual timeout time, so for test 154 it could lead to the function being
executed but refused in Curl_readwrite() and then the application would
just sit idling forever.
This was detected with runtests.pl -e on test 154.
I brought back security.h in commit bb55293313. As we actually
already found out back in 2005 in commit 62970da675, the file name
security.h causes problems so I renamed it curl_sec.h instead.
Added the ability to use an XOAUTH2 bearer token [RFC6750] with SMTP for
authentication using RFC6749 "OAuth 2.0 Authorization Framework".
The bearer token is expected to be valid for the user specified in
conn->user. If CURLOPT_XOAUTH2_BEARER is defined and the connection has
an advertised auth mechanism of "XOAUTH2", the user and access token are
formatted as a base64 encoded string and sent to the server as
"AUTH XOAUTH2 <bearer token>".
Added the ability to use an XOAUTH2 bearer token [RFC6750] with IMAP for
authentication using RFC6749 "OAuth 2.0 Authorization Framework".
The bearer token is expected to be valid for the user specified in
conn->user. If CURLOPT_XOAUTH2_BEARER is defined and the connection has
an advertised auth mechanism of "XOAUTH2", the user and access token are
formatted as a base64 encoded string and sent to the server as
"A001 AUTHENTICATE XOAUTH2 <bearer token>".
Added the ability to specify an XOAUTH2 bearer token [RFC6750] via the
option CURLOPT_XOAUTH2_BEARER for authentication using RFC6749 "OAuth
2.0 Authorization Framework".
Added the ability to generated a base64 encoded XOAUTH2 token
containing: "user=<username>^Aauth=Bearer <bearer token>^A^A"
as per RFC6749 "OAuth 2.0 Authorization Framework".
We've announced this pending removal for a long time and we've
repeatedly asked if anyone would care or if anyone objects. Nobody has
objected. It has probably not even been working for a good while since
nobody has tested/used this code recently.
The stuff in krb4.h that was generic enough to be used by other sources
is now present in security.h
Make sure we always return CURLM_CALL_MULTI_PERFORM when we reach
CURLM_STATE_DONE since the state is transient and it can very well
continue executing as there is nothing to wait for.
Bug: http://curl.haxx.se/mail/lib-2013-08/0211.html
Reported-by: Yi Huang
... this also makes sure that the progess callback gets called more
often during TFTP transfers.
Added test 1238 to verify.
Bug: http://curl.haxx.se/bug/view.cgi?id=1269
Reported-by: Jo3
I build curl.exe (using MingW) with '-DCURLDEBUG' and by importing from
libcurl.dll. Which means the new curl_easy_perform_ev() must be
exported from libcurl.dll.
Doing curl_multi_add_handle() on an easy handle that is already added to
a multi handle now returns this error code. It previously returned
CURLM_BAD_EASY_HANDLE for this condition.
The closure_handle is "owned" by the multi handle and it is
unconditional so the setting up of it should be in the Curl_multi_handle
function rather than curl_multi_add_handle.
This function is meant to work *exactly* as curl_easy_perform() but will
use the event-based libcurl API internally instead of
curl_multi_perform(). To avoid relying on an actual event-based library
and to not use non-portable functions (like epoll or similar), there's a
rather inefficient emulation layer implemented on top of Curl_poll()
instead.
There's currently some convenience logging done in curl_easy_perform_ev
which helps when tracking down problems. They may be suitable to remove
or change once things seem to be fine enough.
curl has a new --test-event option when built with debug enabled that
then uses curl_easy_perform_ev() instead of curl_easy_perform(). If
built without debug, using --test-event will only output a warning
message.
NOTE: curl_easy_perform_ev() is not part if the public API on purpose.
It is only present in debug builds of libcurl and MUST NOT be considered
stable even then. Use it for libcurl-testing purposes only.
runtests.pl now features an -e command line option that makes it use
--test-event for all curl command line tests. The man page is updated.
libcurl quietly truncates usernames, passwords, and options from
before an '@' sign in a URL to 255 (= MAX_CURL_PASSWORD_LENGTH - 1)
characters to fit in fixed-size buffers on the stack. Allocate a
buffer large enough to fit the parsed fields on the fly instead to
support longer passwords.
After this change, there are no more uses of MAX_CURL_OPTIONS_LENGTH
left, so stop defining that constant while at it. The hardcoded max
username and password length constants, on the other hand, are still
used in HTTP proxy credential handling (which this patch doesn't
touch).
Reported-by: Colby Ranger
Instead of nesting "if(success)" blocks and leaving the reader in
suspense about what happens in the !success case, deal with failure
cases early, usually with a simple goto to clean up and return from
the function.
No functional change intended. The main effect is to decrease the
indentation of this function slightly.
libcurl truncates usernames, passwords, and options set with
curl_easy_setopt to 255 (= MAX_CURL_PASSWORD_LENGTH - 1) characters.
This doesn't affect the return value from curl_easy_setopt(), so from
the caller's point of view, there is no sign anything strange has
happened, except that authentication fails.
For example:
# Prepare a long (300-char) password.
s=0123456789; s=$s$s$s$s$s$s$s$s$s$s; s=$s$s$s;
# Start a server.
nc -l -p 8888 | tee out & pid=$!
# Tell curl to pass the password to the server.
curl --user me:$s http://localhost:8888 & sleep 1; kill $pid
# Extract the password.
userpass=$(
awk '/Authorization: Basic/ {print $3}' <out |
tr -d '\r' |
base64 -d
)
password=${userpass#me:}
echo ${#password}
Expected result: 300
Actual result: 255
The fix is simple: allocate appropriately sized buffers on the heap
instead of trying to squeeze the provided values into fixed-size
on-stack buffers.
Bug: http://bugs.debian.org/719856
Reported-by: Colby Ranger
libcurl truncates usernames and passwords it reads from .netrc to
LOGINSIZE and PASSWORDSIZE (64) characters without any indication to
the user, to ensure the values returned from Curl_parsenetrc fit in a
caller-provided buffer.
Fix the interface by passing back dynamically allocated buffers
allocated to fit the user's input. The parser still relies on a
256-character buffer to read each line, though.
So now you can include an ~246-character password in your .netrc,
instead of the previous limit of 63 characters.
Reported-by: Colby Ranger
Instead of remembering before each "return" statement which temporary
allocations, if any, need to be freed, take care to set pointers to
NULL when no longer needed and use a goto to a common block to exit
the function and free all temporaries.
No functional change intended. Currently the only temporary buffer in
this function is "proxy" which is already correctly freed when
appropriate, but there will be more soon.
Use appropriately sized buffers on the heap instead of fixed-size
buffers on the stack, to allow for longer usernames and passwords.
Callers never pass anything longer than MAX_CURL_USER_LENGTH (resp.
MAX_CURL_PASSWORD_LENGTH), so no functional change inteded yet.
This makes the socket callback get called with the proper bitmask as
otherwise the application could be left hanging waiting for reading on
an upload connection!
Bug: http://curl.haxx.se/mail/lib-2013-08/0043.html
Reported-by: Bill Doyle
With everything being struct SessionHandle pointers now, this rename
makes multi.c use the library-wide practise of calling that pointer
'data' instead of the previously used 'easy'.
Moved Curl_easy_addmulti() from easy.c to multi.c, renamed it to
easy_addmulti and made it static.
Removed Curl_easy_initHandleData() and uses of it since it was emptied
in commit cdda92ab67b47d74a.
All protocol handler structs are now opaque (void *) in the
SessionHandle struct and moved in the request-specific sub-struct
'SingleRequest'. The intension is to keep the protocol specific
knowledge in their own dedicated source files [protocol].c etc.
There's some "leakage" where this policy is violated, to be addressed at
a later point in time.
1 - always allocate the struct in protocol->setup_connection. Some
protocol handlers had to get this function added.
2 - always free at the end of a request. This is also an attempt to keep
less memory in the handle after it is completed.
CURLOPT_DNS_USE_GLOBAL_CACHE broke in commit c43127414d (been
broken since the libcurl 7.29.0 release). While this option has been
documented as deprecated for almost a decade and nobody even reported
this bug, it should remain functional.
Added test case 1512 to verify
The previous naming scheme ftp_state_post_XXXX() wasn't really helpful
as it wasn't always immediately after 'xxxx' and it wasn't easy to
understand what it does based on such a name.
This new one is instead ftp_state_yyyy() where yyyy describes what it
does or sends.
This is a regression as this logic used to work. It isn't clear when it
broke, but I'm assuming in 7.28.0 when we went all-multi internally.
This likely never worked with the multi interface. As the failed
connection is detected once the multi state has reached DO_MORE, the
Curl_do_more() function was now expanded somewhat so that the
ftp_do_more() function can request to go "back" to the previous state
when it makes another attempt - using PASV.
Added test case 1233 to verify this fix. It has the little issue that it
assumes no service is listening/accepting connections on port 1...
Reported-by: byte_bucket in the #curl IRC channel
For some reason, OS X 10.5's GCC suddenly stopped working correctly with
macros that change MD5_Init etc. in the code to CC_MD5_Init etc., so I
worked around this by removing use of the macros and inserting static
functions that just call CommonCrypto's implementations of the functions
instead.
This changes the previous check for untrusted certs to a check for
certs explicitely marked as trusted.
The change is backward-compatible (tested with certdata.txt v1.80).
The internal function that's used to detect known file extensions for
the default Content-Type got the the wrong pointer passed in when
CURLFORM_BUFFER + CURLFORM_BUFFERPTR were used. This had the effect that
strlen() would be used which could lead to an out-of-bounds read (and
thus segfault). In most cases it would only lead to it not finding or
using the correct default content-type.
It also showed that test 554 and test 587 were testing for the
previous/wrong behavior and now they're updated as well.
Bug: http://curl.haxx.se/bug/view.cgi?id=1262
Reported-by: Konstantin Isakov
Christian Heimes brought to our attention that the certdata.txt
format has recently changed [1], causing ca-bundle.crt created
with mk-ca-bundle.[pl|vbs] to include untrusted certs.
[1] http://lists.debian.org/debian-release/2012/11/msg00411.html
The motivation for having a separate struct that keep track of an easy
handle when using the multi handle was removed when we switched to
always using the multi interface internally. Now they were just two
separate struct that was always allocated for each easy handle.
This first step just moves the Curl_one_easy struct members into the
SessionHandle struct and hides this somehow (== keeps the source code
changes to a minimum) by defining Curl_one_easy to SessionHandle
The biggest changes in this commit are:
1 - the linked list of easy handles had to be changed somewhat due
to the new struct layout. This made the main linked list pointer
get renamed to 'easyp' and there's also a new pointer to the last
node, called easylp. It is no longer circular but ends with ->next
pointing to NULL. New nodes are still added last.
2 - easy->state is now called easy->mstate to avoid name collision
(This doesn't need to appear in the release notes.) I noticed a few places
where infof() was called, and there should've been an LF at the end of the
string, but there wasn't.
It turns out Snow Leopard not only has SecItemCopyMatching() defined in
a header not included by the omnibus header, but it won't work for our
purposes, because searching for SecIdentityRef objects wasn't added
to that API until Lion. So we now use the old SecKeychainSearch API
instead if the user is building under, or running under, Snow Leopard.
Bug: http://sourceforge.net/p/curl/bugs/1255/
Reported by: Edward Rudd
Previously we used __MAC_10_X and __IPHONE_X to mark digest-generating
code that was specific to OS X and iOS. Now we use
__MAC_OS_X_VERSION_MAX_ALLOWED and __IPHONE_OS_VERSION_MAX_ALLOWED
instead of those macros.
Bug: http://sourceforge.net/p/curl/bugs/1255/
Reported by: Edward Rudd
For the standard VMS text file formats, VMS needs to read the file to
get the actual file size.
For the standard VMS binary file formats, VMS needs a special format of
fopen() call so that it stops reading at the logical end of file instead
of at the end of the blocks allocated to the file.
I structured the patch this way as I was not sure about changing the
structures or parameters to the routines, but would prefer to only call
the stat() function once and pass the information to where the fopen()
call is made.
Bug: https://sourceforge.net/p/curl/bugs/758/
The code for CURLFORM_FILECONTENT had its check for duplicate options
wrong so that it would reject CURLFORM_PTRNAME if used in combination
with it (but not CURLFORM_COPYNAME)! The flags field used for this
purpose cannot be interpreted that broadly.
Bug: http://curl.haxx.se/mail/lib-2013-07/0258.html
Reported-by: Byrial Jensen
Linking on Solaris 10 x86 with Sun Studio 12 failed when we upgraded
automake for the release builds.
Bug: http://curl.haxx.se/bug/view.cgi?id=1217
Reported-by: Dagobert Michelsen
Commit 6d30f8ebed didn't work properly. First, it used the wrong
array index, but this fix also:
1 - only does the copying if indeed there was any activity
2 - makes sure to properly translate between internal and external
bitfields, which are not guaranteed to match
Reported-by: Evgeny Turnaev
Instead of going 50,100,150 etc millisecond delay time when nothing has
been found to do or wait for, we now start lower and double each loop as
in 4,8,16,32 etc.
This lowers the minimum wait without sacrifizing the longer wait too
much with unnecessary CPU cycles burnt.
Bug: http://curl.haxx.se/mail/lib-2013-07/0103.html
Reported-by: Andreas Malzahn
In the case of an active connection when ftp_do_more() detects that the
server has connected back, it must make sure to mark it as complete so
that the multi_runsingle() function will detect this and move on to the
next state.
Bug: http://curl.haxx.se/mail/lib-2013-07/0115.html
Reported-by: Clemens Gruber
CURLOPT_XFERINFOFUNCTION is now the preferred progress callback function
and CURLOPT_PROGRESSFUNCTION is considered deprecated.
This new callback uses pure 'curl_off_t' arguments to pass on full
resolution sizes. It otherwise retains the same characteristics: the
same call rate, the same meanings for the arguments and the return code
is used the same way.
The progressfunc.c example is updated to show how to use the new
callback for newer libcurls while supporting the older one if built with
an older libcurl or even built with a newer libcurl while running with
an older.
This reverts commit 7ed25cc, reinstating commit 8ec2cb5.
As of 18-jul-2013 we still do have code in libcurl that makes use of these
memory functions. Commit 8ec2cb5 comment still applies and is yet valid.
These memory functions are solely used in Windows builds, so all related
code is protected with '#ifdef WIN32' preprocessor conditional compilation
directives.
Specifically, wcsdup() _wcsdup() are used when building a Windows target with
UNICODE and USE_WINDOWS_SSPI preprocessor symbols defined. This is the case
when building a Windows UNICODE target with Windows native SSL/TLS support
enabled.
Realizing that wcsdup() _wcsdup() are used is a bit tricky given that usage
of these is hidden behind _tcsdup() which is MS way of dealing with code
that must tolerate UNICODE and non-UNICODE compilation. Additionally, MS
header files and those compatible from other compilers use this preprocessor
conditional compilation directive in order to select at compilation time
whether 'wide' or 'ansi' MS API functions are used.
Without this code, Windows build targets with Windows native SSL/TLS support
enabled and MemoryTracking support enabled misbehave in tracking memory usage,
regardless of being a UNICODE enabled build or not.
Fixed issue with static build for MSVC2010.
After some investigation I've discovered known issue
http://public.kitware.com/Bug/view.php?id=11240 When .rc file is linked
to static lib it fails with following linker error
LINK : warning LNK4068: /MACHINE not specified; defaulting to X86
file.obj : fatal error LNK1112: module machine type 'x64' conflicts with
target machine type 'X86'
Fix add target property /MACHINE: for MSVC generation.
Also removed old workarounds - it caused errors during msvc build.
Bug: http://curl.haxx.se/mail/lib-2013-07/0046.html
I just noticed that OS X no longer supports SSLv2. Other TLS engines return
an error if the requested protocol isn't supported by the underlying
engine, so we do that now for SSLv2 if the framework returns an error
when trying to turn on SSLv2 support. (Note: As always, SSLv2 support is
only enabled in curl when starting the app with the -2 argument; it's off
by default. SSLv2 is really old and insecure.)
When doing multi-part formposts, libcurl used a pseudo-random value that
was seeded with time(). This turns out to be bad for users who formpost
data that is provided with users who then can guess how the boundary
string will look like and then they can forge a different formpost part
and trick the receiver.
My advice to such implementors is (still even after this change) to not
rely on the boundary strings being cryptographically strong. Fix your
code and logic to not depend on them that much!
I moved the Curl_rand() function into the sslgen.c source file now to be
able to take advantage of the SSL library's random function if it
provides one. If not, try to use the RANDOM_FILE for seeding and as a
last resort keep the old logic, just modified to also add microseconds
which makes it harder to properly guess the exact seed.
The formboundary() function in formdata.c is now using 64 bit entropy
for the boundary and therefore the string of dashes was reduced by 4
letters and there are 16 hex digits following it. The total length is
thus still the same.
Bug: http://curl.haxx.se/bug/view.cgi?id=1251
Reported-by: "Floris"
When using %x, the number must be treated as unsigned as otherwise it
would get sign-extended on for example 64bit machines and do wrong
output. This problem showed when doing printf("%08x", 0xffeeddcc) on a
64bit host.
Follow-up fix from 7d80ed64e4.
The SessionHandle may not be around to use when we restore the sigpipe
sighandler so we store the no_signal boolean in the local struct to know
if/how to restore.
When the c-ares based resolver backend failed to resolve a name, it
tried to show the name that failed from existing structs. This caused
the wrong output and shown hostname when for example --interface
[hostname] was used and that name resolving failed.
Now we use the hostname used in the actual resolve attempt in the error
message as well.
Bug: http://curl.haxx.se/bug/view.cgi?id=1191
Reported-by: Kim Vandry
When we recently started to treat a zero return code from SSL_read() as
an error we also got false positives - which primarily looks to be
because the OpenSSL documentation is wrong and a zero return code is not
at all an error case in many situations.
Now ossl_recv() will check with ERR_get_error() to see if there is a
stored error and only then consider it to be a true error if SSL_read()
returned zero.
Bug: http://curl.haxx.se/bug/view.cgi?id=1249
Reported-by: Nach M. S.
Patch-by: Nach M. S.
