Added v2 firmware w/ switch support

see updated readme for new build instructions
This commit is contained in:
Nathan 2020-02-01 00:35:36 -07:00
parent 614d39f3dd
commit 4ed68f630b
8 changed files with 1660 additions and 53 deletions

View File

@ -0,0 +1,8 @@
#
# This is a project Makefile. It is assumed the directory this Makefile resides in is a
# project subdirectory.
#
PROJECT_NAME := BlueCubeModv2
include $(IDF_PATH)/make/project.mk

View File

@ -0,0 +1,4 @@
#
# "main" pseudo-component makefile.
#
# (Uses default behaviour of compiling all source files in directory, adding 'include' to include path.)

View File

@ -0,0 +1,880 @@
//
// BlueCubeMod Firmware
//
//
// Created by Nathan Reeves 2019
//
#include "esp_log.h"
#include "esp_hidd_api.h"
#include "esp_bt_main.h"
#include "esp_bt_device.h"
#include "esp_bt.h"
#include "esp_err.h"
#include "nvs.h"
#include "nvs_flash.h"
#include "esp_gap_bt_api.h"
#include <string.h>
#include <inttypes.h>
#include <math.h>
#include "esp_timer.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/semphr.h"
#include "driver/gpio.h"
#include "driver/rmt.h"
#include "driver/periph_ctrl.h"
#include "soc/rmt_reg.h"
#define LED_GPIO 25
#define PIN_SEL (1ULL<<LED_GPIO)
//for reading GameCube controller values
#define RMT_TX_GPIO_NUM 23 // GameCube TX GPIO ----
#define RMT_RX_GPIO_NUM 18 // GameCube RX GPIO ----
#define RMT_TX_CHANNEL 2 /*!< RMT channel for transmitter */
#define RMT_RX_CHANNEL 3 /*!< RMT channel for receiver */
#define RMT_CLK_DIV 80 /*!< RMT counter clock divider */
#define RMT_TICK_10_US (80000000/RMT_CLK_DIV/100000) /*!< RMT counter value for 10 us.(Source clock is APB clock) */
#define rmt_item32_tIMEOUT_US 9500 /*!< RMT receiver timeout value(us) */
//Calibration
static int lxcalib = 0;
static int lycalib = 0;
static int cxcalib = 0;
static int cycalib = 0;
static int lcalib = 0;
static int rcalib = 0;
//Buttons and sticks
static uint8_t but1_send = 0;
static uint8_t but2_send = 0;
static uint8_t but3_send = 0;
static uint8_t lx_send = 0;
static uint8_t ly_send = 0;
static uint8_t cx_send = 0;
static uint8_t cy_send = 0;
static uint8_t lt_send = 0;
static uint8_t rt_send = 0;
//RMT Transmitter Init - for reading GameCube controller
rmt_item32_t items[25];
rmt_config_t rmt_tx;
static void rmt_tx_init()
{
rmt_tx.channel = RMT_TX_CHANNEL;
rmt_tx.gpio_num = RMT_TX_GPIO_NUM;
rmt_tx.mem_block_num = 1;
rmt_tx.clk_div = RMT_CLK_DIV;
rmt_tx.tx_config.loop_en = false;
rmt_tx.tx_config.carrier_freq_hz = 24000000;
rmt_tx.tx_config.carrier_level = 1;
rmt_tx.tx_config.carrier_en = 0;
rmt_tx.tx_config.idle_level = 1;
rmt_tx.tx_config.idle_output_en = true;
rmt_tx.rmt_mode = 0;
rmt_config(&rmt_tx);
rmt_driver_install(rmt_tx.channel, 0, 0);
//Fill items[] with console->controller command: 0100 0000 0000 0011 0000 0010
items[0].duration0 = 3;
items[0].level0 = 0;
items[0].duration1 = 1;
items[0].level1 = 1;
items[1].duration0 = 1;
items[1].level0 = 0;
items[1].duration1 = 3;
items[1].level1 = 1;
int j;
for(j = 0; j < 12; j++) {
items[j+2].duration0 = 3;
items[j+2].level0 = 0;
items[j+2].duration1 = 1;
items[j+2].level1 = 1;
}
items[14].duration0 = 1;
items[14].level0 = 0;
items[14].duration1 = 3;
items[14].level1 = 1;
items[15].duration0 = 1;
items[15].level0 = 0;
items[15].duration1 = 3;
items[15].level1 = 1;
for(j = 0; j < 8; j++) {
items[j+16].duration0 = 3;
items[j+16].level0 = 0;
items[j+16].duration1 = 1;
items[j+16].level1 = 1;
}
items[24].duration0 = 1;
items[24].level0 = 0;
items[24].duration1 = 3;
items[24].level1 = 1;
}
//RMT Receiver Init
rmt_config_t rmt_rx;
static void rmt_rx_init()
{
rmt_rx.channel = RMT_RX_CHANNEL;
rmt_rx.gpio_num = RMT_RX_GPIO_NUM;
rmt_rx.clk_div = RMT_CLK_DIV;
rmt_rx.mem_block_num = 4;
rmt_rx.rmt_mode = RMT_MODE_RX;
rmt_rx.rx_config.idle_threshold = rmt_item32_tIMEOUT_US / 10 * (RMT_TICK_10_US);
rmt_config(&rmt_rx);
}
//Polls controller and formats response
//GameCube Controller Protocol: http://www.int03.co.uk/crema/hardware/gamecube/gc-control.html
static void get_buttons()
{
ESP_LOGI("hi", "Hello world from core %d!\n", xPortGetCoreID() );
//button init values
uint8_t but1 = 0;
uint8_t but2 = 0;
uint8_t but3 = 0;
uint8_t dpad = 0x08;//Released
uint8_t lx = 0;
uint8_t ly = 0;
uint8_t cx = 0;
uint8_t cy = 0;
uint8_t lt = 0;
uint8_t rt = 0;
//Sample and find calibration value for sticks
int calib_loop = 0;
int xsum = 0;
int ysum = 0;
int cxsum = 0;
int cysum = 0;
int lsum = 0;
int rsum = 0;
while(calib_loop < 5)
{
lx = 0;
ly = 0;
cx = 0;
cy = 0;
lt = 0;
rt = 0;
rmt_write_items(rmt_tx.channel, items, 25, 0);
rmt_rx_start(rmt_rx.channel, 1);
vTaskDelay(10);
rmt_item32_t* item = (rmt_item32_t*) (RMT_CHANNEL_MEM(rmt_rx.channel));
if(item[33].duration0 == 1 && item[27].duration0 == 1 && item[26].duration0 == 3 && item[25].duration0 == 3)
{
//LEFT STICK X
for(int x = 8; x > -1; x--)
{
if((item[x+41].duration0 == 1))
{
lx += pow(2, 8-x-1);
}
}
//LEFT STICK Y
for(int x = 8; x > -1; x--)
{
if((item[x+49].duration0 == 1))
{
ly += pow(2, 8-x-1);
}
}
//C STICK X
for(int x = 8; x > -1; x--)
{
if((item[x+57].duration0 == 1))
{
cx += pow(2, 8-x-1);
}
}
//C STICK Y
for(int x = 8; x > -1; x--)
{
if((item[x+65].duration0 == 1))
{
cy += pow(2, 8-x-1);
}
}
//R AN
for(int x = 8; x > -1; x--)
{
if((item[x+73].duration0 == 1))
{
rt += pow(2, 8-x-1);
}
}
//L AN
for(int x = 8; x > -1; x--)
{
if((item[x+81].duration0 == 1))
{
lt += pow(2, 8-x-1);
}
}
xsum += lx;
ysum += ly;
cxsum += cx;
cysum += cy;
lsum += lt;
rsum += rt;
calib_loop++;
}
}
//Set Stick Calibration
lxcalib = 127-(xsum/5);
lycalib = 127-(ysum/5);
cxcalib = 127-(cxsum/5);
cycalib = 127-(cysum/5);
lcalib = 127-(lsum/5);
rcalib = 127-(rsum/5);
while(1)
{
but1 = 0;
but2 = 0;
but3 = 0;
dpad = 0x08;
lx = 0;
ly = 0;
cx = 0;
cy = 0;
lt = 0;
rt = 0;
//Write command to controller
rmt_write_items(rmt_tx.channel, items, 25, 0);
rmt_rx_start(rmt_rx.channel, 1);
vTaskDelay(6); //6ms between sample
rmt_item32_t* item = (rmt_item32_t*) (RMT_CHANNEL_MEM(rmt_rx.channel));
//Check first 3 bits and high bit at index 33
if(item[33].duration0 == 1 && item[27].duration0 == 1 && item[26].duration0 == 3 && item[25].duration0 == 3)
{
//Button report: first item is item[25]
//0 0 1 S Y X B A
//1 L R Z U D R L
//Joystick X (8bit)
//Joystick Y (8bit)
//C-Stick X (8bit)
//C-Stick Y (8bit)
//L Trigger Analog (8/4bit)
//R Trigger Analog (8/4bit)
if(item[32].duration0 == 1) but1 += 0x08;// A
if(item[31].duration0 == 1) but1 += 0x04;// B
if(item[30].duration0 == 1) but1 += 0x02;// X
if(item[29].duration0 == 1) but1 += 0x01;// Y
if(item[28].duration0 == 1) but2 += 0x02;// START/PLUS
//DPAD
if(item[40].duration0 == 1) but3 += 0x08;// L
if(item[39].duration0 == 1) but3 += 0x04;// R
if(item[38].duration0 == 1) but3 += 0x01;// D
if(item[37].duration0 == 1) but3 += 0x02;// U
if(item[35].duration0 == 1) but1 += 0x80;// ZR
if(item[34].duration0 == 1) but3 += 0x80;// ZL
//Buttons
if(item[36].duration0 == 1)
{
but1 += 0x40;// Z
// if(but3 == 0x80) { but3 += 0x40;}
if(but2 == 0x02) { but2 = 0x01; } // Minus = Z + Start
if(but3 == 0x02) { but2 = 0x10; } // Home = Z + Up
}
//LEFT STICK X
for(int x = 8; x > -1; x--)
{
if(item[x+41].duration0 == 1)
{
lx += pow(2, 8-x-1);
}
}
//LEFT STICK Y
for(int x = 8; x > -1; x--)
{
if(item[x+49].duration0 == 1)
{
ly += pow(2, 8-x-1);
}
}
//C STICK X
for(int x = 8; x > -1; x--)
{
if(item[x+57].duration0 == 1)
{
cx += pow(2, 8-x-1);
}
}
//C STICK Y
for(int x = 8; x > -1; x--)
{
if(item[x+65].duration0 == 1)
{
cy += pow(2, 8-x-1);
}
}
/// Analog triggers here -- Ignore for Switch :/
/*
//R AN
for(int x = 8; x > -1; x--)
{
if(item[x+73].duration0 == 1)
{
rt += pow(2, 8-x-1);
}
}
//L AN
for(int x = 8; x > -1; x--)
{
if(item[x+81].duration0 == 1)
{
lt += pow(2, 8-x-1);
}
}*/
/////
xSemaphoreTake(xSemaphore, portMAX_DELAY);
but1_send = but1;
but2_send = but2;
but3_send = but3;
lx_send = lx + lxcalib;
ly_send = ly + lycalib;
cx_send = cx + cxcalib;
cy_send = cy + cycalib;
lt_send = 0;//lt;//left trigger analog
rt_send = 0;//rt;//right trigger analog
xSemaphoreGive(xSemaphore);
}else{
//log_info("GameCube controller read fail");
}
}
}
SemaphoreHandle_t xSemaphore;
bool connected = false;
int paired = 0;
TaskHandle_t SendingHandle = NULL;
TaskHandle_t BlinkHandle = NULL;
//Switch button report example // batlvl Buttons Lstick Rstick
//static uint8_t report30[] = {0x30, 0x00, 0x90, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
uint8_t timer = 0;
static uint8_t report30[] = {
0x30,
0x0,
0x80,
0,//but1
0,//but2
0,//but3
0,//Ls
0,//Ls
0,//Ls
0,//Rs
0,//Rs
0,//Rs
0x08
};
void send_buttons()
{
xSemaphoreTake(xSemaphore, portMAX_DELAY);
report30[1] = timer;
//buttons
report30[3] = but1_send;
report30[4] = but2_send;
report30[5] = but3_send;
//encode left stick
report30[6] = (lx_send << 4) & 0xF0;
report30[7] = (lx_send & 0xF0) >> 4;
report30[8] = ly_send;
//encode right stick
report30[9] = (cx_send << 4) & 0xF0;
report30[10] = (cx_send & 0xF0) >> 4;
report30[11] = cy_send;
xSemaphoreGive(xSemaphore);
timer+=1;
if(timer == 255)
timer = 0;
esp_hid_device_send_report(ESP_HIDD_REPORT_TYPE_INTRDATA, 0xa1, sizeof(report30), report30);
if(!paired)
vTaskDelay(100);
else
vTaskDelay(15);
}
const uint8_t hid_descriptor_gamecube[] = {
0x05, 0x01, // Usage Page (Generic Desktop Ctrls)
0x09, 0x05, // Usage (Game Pad)
0xA1, 0x01, // Collection (Application)
//Padding
0x95, 0x03, // REPORT_COUNT = 3
0x75, 0x08, // REPORT_SIZE = 8
0x81, 0x03, // INPUT = Cnst,Var,Abs
//Sticks
0x09, 0x30, // Usage (X)
0x09, 0x31, // Usage (Y)
0x09, 0x32, // Usage (Z)
0x09, 0x35, // Usage (Rz)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x04, // Report Count (4)
0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
//DPAD
0x09, 0x39, // Usage (Hat switch)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x07, // Logical Maximum (7)
0x35, 0x00, // Physical Minimum (0)
0x46, 0x3B, 0x01, // Physical Maximum (315)
0x65, 0x14, // Unit (System: English Rotation, Length: Centimeter)
0x75, 0x04, // Report Size (4)
0x95, 0x01, // Report Count (1)
0x81, 0x42, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,Null State)
//Buttons
0x65, 0x00, // Unit (None)
0x05, 0x09, // Usage Page (Button)
0x19, 0x01, // Usage Minimum (0x01)
0x29, 0x0E, // Usage Maximum (0x0E)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x01, // Logical Maximum (1)
0x75, 0x01, // Report Size (1)
0x95, 0x0E, // Report Count (14)
0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
//Padding
0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00)
0x09, 0x20, // Usage (0x20)
0x75, 0x06, // Report Size (6)
0x95, 0x01, // Report Count (1)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x7F, // Logical Maximum (127)
0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
//Triggers
0x05, 0x01, // Usage Page (Generic Desktop Ctrls)
0x09, 0x33, // Usage (Rx)
0x09, 0x34, // Usage (Ry)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x02, // Report Count (2)
0x81, 0x02,
0xc0
};
int hid_descriptor_gc_len = sizeof(hid_descriptor_gamecube);
///Switch Replies
static uint8_t reply02[] = {0x21, 0x01, 0x40, 0x00, 0x00, 0x00, 0xe6, 0x27, 0x78, 0xab, 0xd7, 0x76, 0x00, 0x82, 0x02, 0x03, 0x48, 0x03, 0x02, 0xD8, 0xA0, 0x1D, 0x40, 0x15, 0x66, 0x03, 0x00, 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00
, 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 };
static uint8_t reply08[] = {0x21, 0x02, 0x8E, 0x84, 0x00, 0x12, 0x01, 0x18, 0x80, 0x01, 0x18, 0x80, 0x80, 0x80, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00
, 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 };
static uint8_t reply03[] = {0x21, 0x05, 0x8E, 0x84, 0x00, 0x12, 0x01, 0x18, 0x80, 0x01, 0x18, 0x80, 0x80, 0x80, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00
, 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 };
static uint8_t reply04[] = {0x21, 0x06, 0x8E, 0x84, 0x00, 0x12, 0x01, 0x18, 0x80, 0x01, 0x18, 0x80, 0x80, 0x83, 0x04, 0x00, 0x6a, 0x01, 0xbb, 0x01, 0x93, 0x01, 0x95, 0x01, 0x00, 0x00, 0x00, 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00
, 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00};
static uint8_t reply1060[] = {0x21, 0x03, 0x8E, 0x84, 0x00, 0x12, 0x01, 0x18, 0x80, 0x01, 0x18, 0x80, 0x80, 0x90, 0x10, 0x00, 0x60, 0x00, 0x00, 0x10, 0x00, 0x00 , 0x00, 0x00, 0x00, 0x00, 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00
, 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 };
static uint8_t reply1050[] = { 0x21, 0x04, 0x8E, 0x84, 0x00, 0x12, 0x01, 0x18, 0x80, 0x01, 0x18, 0x80, 0x80, 0x90, 0x10, 0x50, 0x60, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00,0x00, 0x00, 0x00, 0x00, 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00
, 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 };
static uint8_t reply1080[] = {0x21, 0x04, 0x8E, 0x84, 0x00, 0x12, 0x01, 0x18, 0x80, 0x01, 0x18, 0x80, 0x80, 0x90, 0x10, 0x80, 0x60, 0x00, 0x00, 0x18, 0x5e, 0x01, 0x00, 0x00, 0xf1, 0x0f,
0x19, 0xd0, 0x4c, 0xae, 0x40, 0xe1,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0x00, 0x00};
static uint8_t reply1098[] = {0x21, 0x04, 0x8E, 0x84, 0x00, 0x12, 0x01, 0x18, 0x80, 0x01, 0x18, 0x80, 0x80, 0x90, 0x10, 0x98, 0x60, 0x00, 0x00, 0x12, 0x19, 0xd0, 0x4c, 0xae, 0x40, 0xe1,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0x00, 0x00};
//User analog stick calib
static uint8_t reply1010[] = {0x21, 0x04, 0x8E, 0x84, 0x00, 0x12, 0x01, 0x18, 0x80, 0x01, 0x18, 0x80, 0x80, 0x90, 0x10, 0x10, 0x80, 0x00, 0x00, 0x18, 0x00, 0x00};
static uint8_t reply103D[] = {0x21, 0x05, 0x8E, 0x84, 0x00, 0x12, 0x01, 0x18, 0x80, 0x01, 0x18, 0x80, 0x80, 0x90, 0x10, 0x3D, 0x60, 0x00, 0x00, 0x19, 0xF0, 0x07, 0x7f, 0xF0, 0x07, 0x7f, 0xF0, 0x07, 0x7f, 0xF0, 0x07, 0x7f, 0xF0, 0x07, 0x7f, 0xF0, 0x07, 0x7f, 0xF0, 0x07, 0x7f, 0xF0, 0x07, 0x7f, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x00};
static uint8_t reply1020[] = {0x21, 0x04, 0x8E, 0x84, 0x00, 0x12, 0x01, 0x18, 0x80, 0x01, 0x18, 0x80, 0x80, 0x90, 0x10, 0x20, 0x60, 0x00, 0x00, 0x18, 0x00, 0x00};
static uint8_t reply4001[] = {0x21, 0x04, 0x8E, 0x84, 0x00, 0x12, 0x01, 0x18, 0x80, 0x01, 0x18, 0x80, 0x80, 0x80, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
static uint8_t reply4801[] = {0x21, 0x04, 0x8E, 0x84, 0x00, 0x12, 0x01, 0x18, 0x80, 0x01, 0x18, 0x80, 0x80, 0x80, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
static uint8_t reply3001[] = {0x21, 0x04, 0x8E, 0x84, 0x00, 0x12, 0x01, 0x18, 0x80, 0x01, 0x18, 0x80, 0x80, 0x80, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
static uint8_t reply3333[] = {0x21, 0x03, 0x8E, 0x84, 0x00, 0x12, 0x01, 0x18, 0x80, 0x01, 0x18, 0x80, 0x80, 0x80, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 , 0x00, 0x00, 0x00, 0x00, 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00
, 0x00 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00, 0x00 };
// sending bluetooth values every 15ms
void send_task(void* pvParameters) {
const char* TAG = "send_task";
ESP_LOGI(TAG, "Sending hid reports on core %d\n", xPortGetCoreID() );
while(1)
{
send_buttons();
}
}
// callback for notifying when hidd application is registered or not registered
void application_cb(esp_bd_addr_t bd_addr, esp_hidd_application_state_t state) {
const char* TAG = "application_cb";
switch(state) {
case ESP_HIDD_APP_STATE_NOT_REGISTERED:
ESP_LOGI(TAG, "app not registered");
break;
case ESP_HIDD_APP_STATE_REGISTERED:
ESP_LOGI(TAG, "app is now registered!");
if(bd_addr == NULL) {
ESP_LOGI(TAG, "bd_addr is null...");
break;
}
break;
default:
ESP_LOGW(TAG, "unknown app state %i", state);
break;
}
}
//LED blink
void startBlink()
{
while(1) {
gpio_set_level(LED_GPIO, 0);
vTaskDelay(150);
gpio_set_level(LED_GPIO, 1);
vTaskDelay(150);
gpio_set_level(LED_GPIO, 0);
vTaskDelay(150);
gpio_set_level(LED_GPIO, 1);
vTaskDelay(1000);
}
vTaskDelete(NULL);
}
// callback for hidd connection changes
void connection_cb(esp_bd_addr_t bd_addr, esp_hidd_connection_state_t state) {
const char* TAG = "connection_cb";
switch(state) {
case ESP_HIDD_CONN_STATE_CONNECTED:
ESP_LOGI(TAG, "connected to %02x:%02x:%02x:%02x:%02x:%02x",
bd_addr[0], bd_addr[1], bd_addr[2], bd_addr[3], bd_addr[4], bd_addr[5]);
ESP_LOGI(TAG, "setting bluetooth non connectable");
esp_bt_gap_set_scan_mode(ESP_BT_NON_CONNECTABLE, ESP_BT_NON_DISCOVERABLE);
//clear blinking LED - solid
vTaskDelete(BlinkHandle);
BlinkHandle = NULL;
gpio_set_level(LED_GPIO, 1);
//start solid
xSemaphoreTake(xSemaphore, portMAX_DELAY);
connected = true;
xSemaphoreGive(xSemaphore);
//restart send_task
if(SendingHandle != NULL)
{
vTaskDelete(SendingHandle);
SendingHandle = NULL;
}
xTaskCreatePinnedToCore(send_task, "send_task", 2048, NULL, 2, &SendingHandle, 0);
break;
case ESP_HIDD_CONN_STATE_CONNECTING:
ESP_LOGI(TAG, "connecting");
break;
case ESP_HIDD_CONN_STATE_DISCONNECTED:
xTaskCreate(startBlink, "blink_task", 1024, NULL, 1, &BlinkHandle);
//start blink
ESP_LOGI(TAG, "disconnected from %02x:%02x:%02x:%02x:%02x:%02x",
bd_addr[0], bd_addr[1], bd_addr[2], bd_addr[3], bd_addr[4], bd_addr[5]);
ESP_LOGI(TAG, "making self discoverable");
paired = 0;
esp_bt_gap_set_scan_mode(ESP_BT_CONNECTABLE, ESP_BT_GENERAL_DISCOVERABLE);
xSemaphoreTake(xSemaphore, portMAX_DELAY);
connected = false;
xSemaphoreGive(xSemaphore);
break;
case ESP_HIDD_CONN_STATE_DISCONNECTING:
ESP_LOGI(TAG, "disconnecting");
break;
default:
ESP_LOGI(TAG, "unknown connection status");
break;
}
}
//callback for discovering
void get_device_cb()
{
ESP_LOGI("hi", "found a device");
}
// callback for when hid host requests a report
void get_report_cb(uint8_t type, uint8_t id, uint16_t buffer_size) {
const char* TAG = "get_report_cb";
ESP_LOGI(TAG, "got a get_report request from host");
}
// callback for when hid host sends a report
void set_report_cb(uint8_t type, uint8_t id, uint16_t len, uint8_t* p_data) {
const char* TAG = "set_report_cb";
ESP_LOGI(TAG, "got a report from host");
}
// callback for when hid host requests a protocol change
void set_protocol_cb(uint8_t protocol) {
const char* TAG = "set_protocol_cb";
ESP_LOGI(TAG, "got a set_protocol request from host");
}
// callback for when hid host sends interrupt data
void intr_data_cb(uint8_t report_id, uint16_t len, uint8_t* p_data) {
const char* TAG = "intr_data_cb";
//switch pairing sequence
if(len == 49)
{
if(p_data[10] == 2)
{
esp_hid_device_send_report(ESP_HIDD_REPORT_TYPE_INTRDATA, 0xa1, sizeof(reply02), reply02);
}
if(p_data[10] == 8)
{
esp_hid_device_send_report(ESP_HIDD_REPORT_TYPE_INTRDATA, 0xa1, sizeof(reply08), reply08);
}
if(p_data[10] == 16 && p_data[11] == 0 && p_data[12] == 96)
{
esp_hid_device_send_report(ESP_HIDD_REPORT_TYPE_INTRDATA, 0xa1, sizeof(reply1060), reply1060);
}
if(p_data[10] == 16 && p_data[11] == 80 && p_data[12] == 96)
{
esp_hid_device_send_report(ESP_HIDD_REPORT_TYPE_INTRDATA, 0xa1, sizeof(reply1050), reply1050);
}
if(p_data[10] == 3)
{
esp_hid_device_send_report(ESP_HIDD_REPORT_TYPE_INTRDATA, 0xa1, sizeof(reply03), reply03);
}
if(p_data[10] == 4)
{
esp_hid_device_send_report(ESP_HIDD_REPORT_TYPE_INTRDATA, 0xa1, sizeof(reply04), reply04);
}
if(p_data[10] == 16 && p_data[11] == 128 && p_data[12] == 96)
{
esp_hid_device_send_report(ESP_HIDD_REPORT_TYPE_INTRDATA, 0xa1, sizeof(reply1080), reply1080);
}
if(p_data[10] == 16 && p_data[11] == 152 && p_data[12] == 96)
{
esp_hid_device_send_report(ESP_HIDD_REPORT_TYPE_INTRDATA, 0xa1, sizeof(reply1098), reply1098);
}
if(p_data[10] == 16 && p_data[11] == 16 && p_data[12] == 128)
{
esp_hid_device_send_report(ESP_HIDD_REPORT_TYPE_INTRDATA, 0xa1, sizeof(reply1010), reply1010);
}
if(p_data[10] == 16 && p_data[11] == 61 && p_data[12] == 96)
{
esp_hid_device_send_report(ESP_HIDD_REPORT_TYPE_INTRDATA, 0xa1, sizeof(reply103D), reply103D);
}
if(p_data[10] == 16 && p_data[11] == 32 && p_data[12] == 96)
{
esp_hid_device_send_report(ESP_HIDD_REPORT_TYPE_INTRDATA, 0xa1, sizeof(reply1020), reply1020);
}
if(p_data[10] == 64 && p_data[11] == 1)
{
esp_hid_device_send_report(ESP_HIDD_REPORT_TYPE_INTRDATA, 0xa1, sizeof(reply4001), reply4001);
}
if(p_data[10] == 72 && p_data[11] == 1)
{
esp_hid_device_send_report(ESP_HIDD_REPORT_TYPE_INTRDATA, 0xa1, sizeof(reply4801), reply4801);
}
if(p_data[10] == 48 && p_data[11] == 1)
{
esp_hid_device_send_report(ESP_HIDD_REPORT_TYPE_INTRDATA, 0xa1, sizeof(reply3001), reply3001);
}
if(p_data[10] == 33 && p_data[11] == 33)
{
esp_hid_device_send_report(ESP_HIDD_REPORT_TYPE_INTRDATA, 0xa1, sizeof(reply3333), reply3333);
paired = 1;
}
if(p_data[10] == 64 && p_data[11] == 2)
{
esp_hid_device_send_report(ESP_HIDD_REPORT_TYPE_INTRDATA, 0xa1, sizeof(reply4001), reply4001);
}
//ESP_LOGI(TAG, "got an interrupt report from host, subcommand: %d %d %d Length: %d", p_data[10], p_data[11], p_data[12], len);
}
else
{
//ESP_LOGI("heap size:", "%d", xPortGetFreeHeapSize());
//ESP_LOGI(TAG, "pairing packet size != 49, subcommand: %d %d %d Length: %d", p_data[10], p_data[11], p_data[12], len);
}
}
// callback for when hid host does a virtual cable unplug
void vc_unplug_cb(void) {
const char* TAG = "vc_unplug_cb";
ESP_LOGI(TAG, "host did a virtual cable unplug");
}
void print_bt_address() {
const char* TAG = "bt_address";
const uint8_t* bd_addr;
bd_addr = esp_bt_dev_get_address();
ESP_LOGI(TAG, "my bluetooth address is %02X:%02X:%02X:%02X:%02X:%02X",
bd_addr[0], bd_addr[1], bd_addr[2], bd_addr[3], bd_addr[4], bd_addr[5]);
}
#define SPP_TAG "tag"
static void esp_bt_gap_cb(esp_bt_gap_cb_event_t event, esp_bt_gap_cb_param_t *param)
{
switch(event){
case ESP_BT_GAP_DISC_RES_EVT:
ESP_LOGI(SPP_TAG, "ESP_BT_GAP_DISC_RES_EVT");
esp_log_buffer_hex(SPP_TAG, param->disc_res.bda, ESP_BD_ADDR_LEN);
break;
case ESP_BT_GAP_DISC_STATE_CHANGED_EVT:
ESP_LOGI(SPP_TAG, "ESP_BT_GAP_DISC_STATE_CHANGED_EVT");
break;
case ESP_BT_GAP_RMT_SRVCS_EVT:
ESP_LOGI(SPP_TAG, "ESP_BT_GAP_RMT_SRVCS_EVT");
ESP_LOGI(SPP_TAG, "%d", param->rmt_srvcs.num_uuids);
break;
case ESP_BT_GAP_RMT_SRVC_REC_EVT:
ESP_LOGI(SPP_TAG, "ESP_BT_GAP_RMT_SRVC_REC_EVT");
break;
case ESP_BT_GAP_AUTH_CMPL_EVT:{
if (param->auth_cmpl.stat == ESP_BT_STATUS_SUCCESS) {
ESP_LOGI(SPP_TAG, "authentication success: %s", param->auth_cmpl.device_name);
esp_log_buffer_hex(SPP_TAG, param->auth_cmpl.bda, ESP_BD_ADDR_LEN);
} else {
ESP_LOGE(SPP_TAG, "authentication failed, status:%d", param->auth_cmpl.stat);
}
break;
}
default:
break;
}
}
void app_main() {
//GameCube Contoller reading init
rmt_tx_init();
rmt_rx_init();
xTaskCreatePinnedToCore(get_buttons, "gbuttons", 2048, NULL, 1, NULL, 1);
//flash LED
vTaskDelay(100);
gpio_set_level(LED_GPIO, 0);
vTaskDelay(100);
gpio_set_level(LED_GPIO, 1);
vTaskDelay(100);
gpio_set_level(LED_GPIO, 0);
vTaskDelay(100);
gpio_set_level(LED_GPIO, 1);
vTaskDelay(100);
gpio_set_level(LED_GPIO, 0);
const char* TAG = "app_main";
esp_err_t ret;
static esp_hidd_callbacks_t callbacks;
static esp_hidd_app_param_t app_param;
static esp_hidd_qos_param_t both_qos;
xSemaphore = xSemaphoreCreateMutex();
gpio_config_t io_conf;
//disable interrupt
io_conf.intr_type = GPIO_PIN_INTR_DISABLE;
//set as output mode
io_conf.mode = GPIO_MODE_OUTPUT;
//bit mask of the pins that you want to set,e.g.GPIO18/19
io_conf.pin_bit_mask = PIN_SEL;
//disable pull-down mode
io_conf.pull_down_en = 0;
//disable pull-up mode
io_conf.pull_up_en = 0;
//configure GPIO with the given settings
gpio_config(&io_conf);
//gap_callbacks = get_device_cb;
app_param.name = "BlueCubeMod";
app_param.description = "BlueCubeMod Example";
app_param.provider = "ESP32";
app_param.subclass = 0x8;
app_param.desc_list = hid_descriptor_gamecube;
app_param.desc_list_len = hid_descriptor_gc_len;
memset(&both_qos, 0, sizeof(esp_hidd_qos_param_t));
callbacks.application_state_cb = application_cb;
callbacks.connection_state_cb = connection_cb;
callbacks.get_report_cb = get_report_cb;
callbacks.set_report_cb = set_report_cb;
callbacks.set_protocol_cb = set_protocol_cb;
callbacks.intr_data_cb = intr_data_cb;
callbacks.vc_unplug_cb = vc_unplug_cb;
ret = nvs_flash_init();
if (ret == ESP_ERR_NVS_NO_FREE_PAGES || ret == ESP_ERR_NVS_NEW_VERSION_FOUND) {
ESP_ERROR_CHECK(nvs_flash_erase());
ret = nvs_flash_init();
}
ESP_ERROR_CHECK( ret );
ESP_ERROR_CHECK(esp_bt_controller_mem_release(ESP_BT_MODE_BLE));
esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT();
esp_bt_mem_release(ESP_BT_MODE_BLE);
if ((ret = esp_bt_controller_init(&bt_cfg)) != ESP_OK) {
ESP_LOGE(TAG, "initialize controller failed: %s\n", esp_err_to_name(ret));
return;
}
if ((ret = esp_bt_controller_enable(ESP_BT_MODE_CLASSIC_BT)) != ESP_OK) {
ESP_LOGE(TAG, "enable controller failed: %s\n", esp_err_to_name(ret));
return;
}
if ((ret = esp_bluedroid_init()) != ESP_OK) {
ESP_LOGE(TAG, "initialize bluedroid failed: %s\n", esp_err_to_name(ret));
return;
}
if ((ret = esp_bluedroid_enable()) != ESP_OK) {
ESP_LOGE(TAG, "enable bluedroid failed: %s\n", esp_err_to_name(ret));
return;
}
esp_bt_gap_register_callback(esp_bt_gap_cb);
ESP_LOGI(TAG, "setting hid parameters");
esp_hid_device_register_app(&app_param, &both_qos, &both_qos);
ESP_LOGI(TAG, "starting hid device");
esp_hid_device_init(&callbacks);
ESP_LOGI(TAG, "setting device name");
esp_bt_dev_set_device_name("Pro Controller");
ESP_LOGI(TAG, "setting to connectable, discoverable");
esp_bt_gap_set_scan_mode(ESP_BT_CONNECTABLE, ESP_BT_GENERAL_DISCOVERABLE);
//start blinking
xTaskCreate(startBlink, "blink_task", 1024, NULL, 1, &BlinkHandle);
}

View File

@ -0,0 +1,705 @@
#
# Automatically generated file. DO NOT EDIT.
# Espressif IoT Development Framework (ESP-IDF) Project Configuration
#
CONFIG_IDF_TARGET="esp32"
#
# SDK tool configuration
#
CONFIG_SDK_TOOLPREFIX="xtensa-esp32-elf-"
CONFIG_SDK_PYTHON="python"
CONFIG_SDK_MAKE_WARN_UNDEFINED_VARIABLES=y
CONFIG_APP_COMPILE_TIME_DATE=y
# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set
# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set
CONFIG_LOG_BOOTLOADER_LEVEL=3
# CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V is not set
CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
# CONFIG_BOOTLOADER_FACTORY_RESET is not set
# CONFIG_BOOTLOADER_APP_TEST is not set
CONFIG_BOOTLOADER_WDT_ENABLE=y
# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set
CONFIG_BOOTLOADER_WDT_TIME_MS=9000
# CONFIG_APP_ROLLBACK_ENABLE is not set
# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set
# CONFIG_SECURE_BOOT_ENABLED is not set
# CONFIG_FLASH_ENCRYPTION_ENABLED is not set
CONFIG_ESPTOOLPY_PORT="/dev/cu.SLAB_USBtoUART"
# CONFIG_ESPTOOLPY_BAUD_115200B is not set
# CONFIG_ESPTOOLPY_BAUD_230400B is not set
CONFIG_ESPTOOLPY_BAUD_921600B=y
# CONFIG_ESPTOOLPY_BAUD_2MB is not set
# CONFIG_ESPTOOLPY_BAUD_OTHER is not set
CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
CONFIG_ESPTOOLPY_BAUD=921600
CONFIG_ESPTOOLPY_COMPRESSED=y
# CONFIG_FLASHMODE_QIO is not set
# CONFIG_FLASHMODE_QOUT is not set
CONFIG_FLASHMODE_DIO=y
# CONFIG_FLASHMODE_DOUT is not set
CONFIG_ESPTOOLPY_FLASHMODE="dio"
# CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set
CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set
# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
CONFIG_ESPTOOLPY_FLASHFREQ="40m"
# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y
CONFIG_ESPTOOLPY_BEFORE_RESET=y
# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
CONFIG_ESPTOOLPY_BEFORE="default_reset"
CONFIG_ESPTOOLPY_AFTER_RESET=y
# CONFIG_ESPTOOLPY_AFTER_NORESET is not set
CONFIG_ESPTOOLPY_AFTER="hard_reset"
# CONFIG_MONITOR_BAUD_9600B is not set
# CONFIG_MONITOR_BAUD_57600B is not set
CONFIG_MONITOR_BAUD_115200B=y
# CONFIG_MONITOR_BAUD_230400B is not set
# CONFIG_MONITOR_BAUD_921600B is not set
# CONFIG_MONITOR_BAUD_2MB is not set
# CONFIG_MONITOR_BAUD_OTHER is not set
CONFIG_MONITOR_BAUD_OTHER_VAL=115200
CONFIG_MONITOR_BAUD=115200
CONFIG_PARTITION_TABLE_SINGLE_APP=y
# CONFIG_PARTITION_TABLE_TWO_OTA is not set
# CONFIG_PARTITION_TABLE_CUSTOM is not set
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv"
CONFIG_PARTITION_TABLE_OFFSET=0x8000
CONFIG_PARTITION_TABLE_MD5=y
CONFIG_OPTIMIZATION_LEVEL_DEBUG=y
# CONFIG_OPTIMIZATION_LEVEL_RELEASE is not set
CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set
# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set
# CONFIG_CXX_EXCEPTIONS is not set
CONFIG_STACK_CHECK_NONE=y
# CONFIG_STACK_CHECK_NORM is not set
# CONFIG_STACK_CHECK_STRONG is not set
# CONFIG_STACK_CHECK_ALL is not set
# CONFIG_STACK_CHECK is not set
# CONFIG_WARN_WRITE_STRINGS is not set
# CONFIG_DISABLE_GCC8_WARNINGS is not set
# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set
CONFIG_ESP32_APPTRACE_DEST_NONE=y
# CONFIG_ESP32_APPTRACE_ENABLE is not set
CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
CONFIG_BT_ENABLED=y
# CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY is not set
CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY=y
# CONFIG_BTDM_CONTROLLER_MODE_BTDM is not set
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN=4
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN=2
CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN_EFF=0
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN_EFF=4
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN_EFF=2
CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE_0=y
# CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE_1 is not set
CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE=0
CONFIG_BTDM_CONTROLLER_HCI_MODE_VHCI=y
# CONFIG_BTDM_CONTROLLER_HCI_MODE_UART_H4 is not set
CONFIG_BTDM_CONTROLLER_MODEM_SLEEP=y
CONFIG_BTDM_MODEM_SLEEP_MODE_ORIG=y
# CONFIG_BTDM_MODEM_SLEEP_MODE_EVED is not set
CONFIG_BTDM_LPCLK_SEL_MAIN_XTAL=y
CONFIG_BLUEDROID_ENABLED=y
CONFIG_BLUEDROID_PINNED_TO_CORE_0=y
# CONFIG_BLUEDROID_PINNED_TO_CORE_1 is not set
CONFIG_BLUEDROID_PINNED_TO_CORE=0
CONFIG_BTC_TASK_STACK_SIZE=4096
CONFIG_BTU_TASK_STACK_SIZE=4096
# CONFIG_BLUEDROID_MEM_DEBUG is not set
CONFIG_CLASSIC_BT_ENABLED=y
# CONFIG_A2DP_ENABLE is not set
# CONFIG_BT_SPP_ENABLED is not set
# CONFIG_HFP_ENABLE is not set
CONFIG_BT_SSP_ENABLED=y
CONFIG_BT_HID_DEV_ENABLED=y
# CONFIG_BT_STACK_NO_LOG is not set
# CONFIG_HCI_TRACE_LEVEL_NONE is not set
# CONFIG_HCI_TRACE_LEVEL_ERROR is not set
CONFIG_HCI_TRACE_LEVEL_WARNING=y
# CONFIG_HCI_TRACE_LEVEL_API is not set
# CONFIG_HCI_TRACE_LEVEL_EVENT is not set
# CONFIG_HCI_TRACE_LEVEL_DEBUG is not set
# CONFIG_HCI_TRACE_LEVEL_VERBOSE is not set
CONFIG_HCI_INITIAL_TRACE_LEVEL=2
# CONFIG_BTM_TRACE_LEVEL_NONE is not set
# CONFIG_BTM_TRACE_LEVEL_ERROR is not set
CONFIG_BTM_TRACE_LEVEL_WARNING=y
# CONFIG_BTM_TRACE_LEVEL_API is not set
# CONFIG_BTM_TRACE_LEVEL_EVENT is not set
# CONFIG_BTM_TRACE_LEVEL_DEBUG is not set
# CONFIG_BTM_TRACE_LEVEL_VERBOSE is not set
CONFIG_BTM_INITIAL_TRACE_LEVEL=2
# CONFIG_L2CAP_TRACE_LEVEL_NONE is not set
# CONFIG_L2CAP_TRACE_LEVEL_ERROR is not set
CONFIG_L2CAP_TRACE_LEVEL_WARNING=y
# CONFIG_L2CAP_TRACE_LEVEL_API is not set
# CONFIG_L2CAP_TRACE_LEVEL_EVENT is not set
# CONFIG_L2CAP_TRACE_LEVEL_DEBUG is not set
# CONFIG_L2CAP_TRACE_LEVEL_VERBOSE is not set
CONFIG_L2CAP_INITIAL_TRACE_LEVEL=2
# CONFIG_RFCOMM_TRACE_LEVEL_NONE is not set
# CONFIG_RFCOMM_TRACE_LEVEL_ERROR is not set
CONFIG_RFCOMM_TRACE_LEVEL_WARNING=y
# CONFIG_RFCOMM_TRACE_LEVEL_API is not set
# CONFIG_RFCOMM_TRACE_LEVEL_EVENT is not set
# CONFIG_RFCOMM_TRACE_LEVEL_DEBUG is not set
# CONFIG_RFCOMM_TRACE_LEVEL_VERBOSE is not set
CONFIG_RFCOMM_INITIAL_TRACE_LEVEL=2
# CONFIG_SDP_TRACE_LEVEL_NONE is not set
# CONFIG_SDP_TRACE_LEVEL_ERROR is not set
CONFIG_SDP_TRACE_LEVEL_WARNING=y
# CONFIG_SDP_TRACE_LEVEL_API is not set
# CONFIG_SDP_TRACE_LEVEL_EVENT is not set
# CONFIG_SDP_TRACE_LEVEL_DEBUG is not set
# CONFIG_SDP_TRACE_LEVEL_VERBOSE is not set
CONFIG_SDP_INITIAL_TRACE_LEVEL=2
# CONFIG_GAP_TRACE_LEVEL_NONE is not set
# CONFIG_GAP_TRACE_LEVEL_ERROR is not set
CONFIG_GAP_TRACE_LEVEL_WARNING=y
# CONFIG_GAP_TRACE_LEVEL_API is not set
# CONFIG_GAP_TRACE_LEVEL_EVENT is not set
# CONFIG_GAP_TRACE_LEVEL_DEBUG is not set
# CONFIG_GAP_TRACE_LEVEL_VERBOSE is not set
CONFIG_GAP_INITIAL_TRACE_LEVEL=2
# CONFIG_BNEP_TRACE_LEVEL_NONE is not set
# CONFIG_BNEP_TRACE_LEVEL_ERROR is not set
CONFIG_BNEP_TRACE_LEVEL_WARNING=y
# CONFIG_BNEP_TRACE_LEVEL_API is not set
# CONFIG_BNEP_TRACE_LEVEL_EVENT is not set
# CONFIG_BNEP_TRACE_LEVEL_DEBUG is not set
# CONFIG_BNEP_TRACE_LEVEL_VERBOSE is not set
CONFIG_BNEP_INITIAL_TRACE_LEVEL=2
# CONFIG_PAN_TRACE_LEVEL_NONE is not set
# CONFIG_PAN_TRACE_LEVEL_ERROR is not set
CONFIG_PAN_TRACE_LEVEL_WARNING=y
# CONFIG_PAN_TRACE_LEVEL_API is not set
# CONFIG_PAN_TRACE_LEVEL_EVENT is not set
# CONFIG_PAN_TRACE_LEVEL_DEBUG is not set
# CONFIG_PAN_TRACE_LEVEL_VERBOSE is not set
CONFIG_PAN_INITIAL_TRACE_LEVEL=2
# CONFIG_A2D_TRACE_LEVEL_NONE is not set
# CONFIG_A2D_TRACE_LEVEL_ERROR is not set
CONFIG_A2D_TRACE_LEVEL_WARNING=y
# CONFIG_A2D_TRACE_LEVEL_API is not set
# CONFIG_A2D_TRACE_LEVEL_EVENT is not set
# CONFIG_A2D_TRACE_LEVEL_DEBUG is not set
# CONFIG_A2D_TRACE_LEVEL_VERBOSE is not set
CONFIG_A2D_INITIAL_TRACE_LEVEL=2
# CONFIG_AVDT_TRACE_LEVEL_NONE is not set
# CONFIG_AVDT_TRACE_LEVEL_ERROR is not set
CONFIG_AVDT_TRACE_LEVEL_WARNING=y
# CONFIG_AVDT_TRACE_LEVEL_API is not set
# CONFIG_AVDT_TRACE_LEVEL_EVENT is not set
# CONFIG_AVDT_TRACE_LEVEL_DEBUG is not set
# CONFIG_AVDT_TRACE_LEVEL_VERBOSE is not set
CONFIG_AVDT_INITIAL_TRACE_LEVEL=2
# CONFIG_AVCT_TRACE_LEVEL_NONE is not set
# CONFIG_AVCT_TRACE_LEVEL_ERROR is not set
CONFIG_AVCT_TRACE_LEVEL_WARNING=y
# CONFIG_AVCT_TRACE_LEVEL_API is not set
# CONFIG_AVCT_TRACE_LEVEL_EVENT is not set
# CONFIG_AVCT_TRACE_LEVEL_DEBUG is not set
# CONFIG_AVCT_TRACE_LEVEL_VERBOSE is not set
CONFIG_AVCT_INITIAL_TRACE_LEVEL=2
# CONFIG_AVRC_TRACE_LEVEL_NONE is not set
# CONFIG_AVRC_TRACE_LEVEL_ERROR is not set
CONFIG_AVRC_TRACE_LEVEL_WARNING=y
# CONFIG_AVRC_TRACE_LEVEL_API is not set
# CONFIG_AVRC_TRACE_LEVEL_EVENT is not set
# CONFIG_AVRC_TRACE_LEVEL_DEBUG is not set
# CONFIG_AVRC_TRACE_LEVEL_VERBOSE is not set
CONFIG_AVRC_INITIAL_TRACE_LEVEL=2
# CONFIG_MCA_TRACE_LEVEL_NONE is not set
# CONFIG_MCA_TRACE_LEVEL_ERROR is not set
CONFIG_MCA_TRACE_LEVEL_WARNING=y
# CONFIG_MCA_TRACE_LEVEL_API is not set
# CONFIG_MCA_TRACE_LEVEL_EVENT is not set
# CONFIG_MCA_TRACE_LEVEL_DEBUG is not set
# CONFIG_MCA_TRACE_LEVEL_VERBOSE is not set
CONFIG_MCA_INITIAL_TRACE_LEVEL=2
# CONFIG_HID_TRACE_LEVEL_NONE is not set
# CONFIG_HID_TRACE_LEVEL_ERROR is not set
CONFIG_HID_TRACE_LEVEL_WARNING=y
# CONFIG_HID_TRACE_LEVEL_API is not set
# CONFIG_HID_TRACE_LEVEL_EVENT is not set
# CONFIG_HID_TRACE_LEVEL_DEBUG is not set
# CONFIG_HID_TRACE_LEVEL_VERBOSE is not set
CONFIG_HID_INITIAL_TRACE_LEVEL=2
# CONFIG_HIDD_TRACE_LEVEL_NONE is not set
# CONFIG_HIDD_TRACE_LEVEL_ERROR is not set
CONFIG_HIDD_TRACE_LEVEL_WARNING=y
# CONFIG_HIDD_TRACE_LEVEL_API is not set
# CONFIG_HIDD_TRACE_LEVEL_EVENT is not set
# CONFIG_HIDD_TRACE_LEVEL_DEBUG is not set
# CONFIG_HIDD_TRACE_LEVEL_VERBOSE is not set
CONFIG_HIDD_INITIAL_TRACE_LEVEL=2
# CONFIG_APPL_TRACE_LEVEL_NONE is not set
# CONFIG_APPL_TRACE_LEVEL_ERROR is not set
CONFIG_APPL_TRACE_LEVEL_WARNING=y
# CONFIG_APPL_TRACE_LEVEL_API is not set
# CONFIG_APPL_TRACE_LEVEL_EVENT is not set
# CONFIG_APPL_TRACE_LEVEL_DEBUG is not set
# CONFIG_APPL_TRACE_LEVEL_VERBOSE is not set
CONFIG_APPL_INITIAL_TRACE_LEVEL=2
# CONFIG_GATT_TRACE_LEVEL_NONE is not set
# CONFIG_GATT_TRACE_LEVEL_ERROR is not set
CONFIG_GATT_TRACE_LEVEL_WARNING=y
# CONFIG_GATT_TRACE_LEVEL_API is not set
# CONFIG_GATT_TRACE_LEVEL_EVENT is not set
# CONFIG_GATT_TRACE_LEVEL_DEBUG is not set
# CONFIG_GATT_TRACE_LEVEL_VERBOSE is not set
CONFIG_GATT_INITIAL_TRACE_LEVEL=2
# CONFIG_SMP_TRACE_LEVEL_NONE is not set
# CONFIG_SMP_TRACE_LEVEL_ERROR is not set
CONFIG_SMP_TRACE_LEVEL_WARNING=y
# CONFIG_SMP_TRACE_LEVEL_API is not set
# CONFIG_SMP_TRACE_LEVEL_EVENT is not set
# CONFIG_SMP_TRACE_LEVEL_DEBUG is not set
# CONFIG_SMP_TRACE_LEVEL_VERBOSE is not set
CONFIG_SMP_INITIAL_TRACE_LEVEL=2
# CONFIG_BTIF_TRACE_LEVEL_NONE is not set
# CONFIG_BTIF_TRACE_LEVEL_ERROR is not set
CONFIG_BTIF_TRACE_LEVEL_WARNING=y
# CONFIG_BTIF_TRACE_LEVEL_API is not set
# CONFIG_BTIF_TRACE_LEVEL_EVENT is not set
# CONFIG_BTIF_TRACE_LEVEL_DEBUG is not set
# CONFIG_BTIF_TRACE_LEVEL_VERBOSE is not set
CONFIG_BTIF_INITIAL_TRACE_LEVEL=2
# CONFIG_BTC_TRACE_LEVEL_NONE is not set
# CONFIG_BTC_TRACE_LEVEL_ERROR is not set
CONFIG_BTC_TRACE_LEVEL_WARNING=y
# CONFIG_BTC_TRACE_LEVEL_API is not set
# CONFIG_BTC_TRACE_LEVEL_EVENT is not set
# CONFIG_BTC_TRACE_LEVEL_DEBUG is not set
# CONFIG_BTC_TRACE_LEVEL_VERBOSE is not set
CONFIG_BTC_INITIAL_TRACE_LEVEL=2
# CONFIG_OSI_TRACE_LEVEL_NONE is not set
# CONFIG_OSI_TRACE_LEVEL_ERROR is not set
CONFIG_OSI_TRACE_LEVEL_WARNING=y
# CONFIG_OSI_TRACE_LEVEL_API is not set
# CONFIG_OSI_TRACE_LEVEL_EVENT is not set
# CONFIG_OSI_TRACE_LEVEL_DEBUG is not set
# CONFIG_OSI_TRACE_LEVEL_VERBOSE is not set
CONFIG_OSI_INITIAL_TRACE_LEVEL=2
# CONFIG_BLUFI_TRACE_LEVEL_NONE is not set
# CONFIG_BLUFI_TRACE_LEVEL_ERROR is not set
CONFIG_BLUFI_TRACE_LEVEL_WARNING=y
# CONFIG_BLUFI_TRACE_LEVEL_API is not set
# CONFIG_BLUFI_TRACE_LEVEL_EVENT is not set
# CONFIG_BLUFI_TRACE_LEVEL_DEBUG is not set
# CONFIG_BLUFI_TRACE_LEVEL_VERBOSE is not set
CONFIG_BLUFI_INITIAL_TRACE_LEVEL=2
CONFIG_BT_ACL_CONNECTIONS=4
# CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST is not set
# CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY is not set
# CONFIG_BLE_HOST_QUEUE_CONGESTION_CHECK is not set
CONFIG_SMP_ENABLE=y
CONFIG_BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT=30
CONFIG_BT_RESERVE_DRAM=0xdb5c
# CONFIG_ADC_FORCE_XPD_FSM is not set
CONFIG_ADC2_DISABLE_DAC=y
# CONFIG_SPI_MASTER_IN_IRAM is not set
CONFIG_SPI_MASTER_ISR_IN_IRAM=y
# CONFIG_SPI_SLAVE_IN_IRAM is not set
CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
# CONFIG_EFUSE_CUSTOM_TABLE is not set
# CONFIG_EFUSE_VIRTUAL is not set
# CONFIG_EFUSE_CODE_SCHEME_COMPAT_NONE is not set
CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4=y
# CONFIG_EFUSE_CODE_SCHEME_COMPAT_REPEAT is not set
CONFIG_EFUSE_MAX_BLK_LEN=192
CONFIG_IDF_TARGET_ESP32=y
# CONFIG_ESP32_DEFAULT_CPU_FREQ_80 is not set
CONFIG_ESP32_DEFAULT_CPU_FREQ_160=y
# CONFIG_ESP32_DEFAULT_CPU_FREQ_240 is not set
CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160
# CONFIG_SPIRAM_SUPPORT is not set
# CONFIG_MEMMAP_TRACEMEM is not set
# CONFIG_MEMMAP_TRACEMEM_TWOBANKS is not set
# CONFIG_ESP32_TRAX is not set
CONFIG_TRACEMEM_RESERVE_DRAM=0x0
# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set
CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y
CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4
CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=4096
CONFIG_MAIN_TASK_STACK_SIZE=4096
CONFIG_IPC_TASK_STACK_SIZE=1024
CONFIG_TIMER_TASK_STACK_SIZE=3584
CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set
# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set
# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set
# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set
CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y
# CONFIG_NEWLIB_NANO_FORMAT is not set
CONFIG_CONSOLE_UART_DEFAULT=y
# CONFIG_CONSOLE_UART_CUSTOM is not set
# CONFIG_CONSOLE_UART_NONE is not set
CONFIG_CONSOLE_UART_NUM=0
CONFIG_CONSOLE_UART_BAUDRATE=115200
# CONFIG_ULP_COPROC_ENABLED is not set
CONFIG_ULP_COPROC_RESERVE_MEM=0
# CONFIG_ESP32_PANIC_PRINT_HALT is not set
CONFIG_ESP32_PANIC_PRINT_REBOOT=y
# CONFIG_ESP32_PANIC_SILENT_REBOOT is not set
# CONFIG_ESP32_PANIC_GDBSTUB is not set
CONFIG_ESP32_DEBUG_OCDAWARE=y
CONFIG_ESP32_DEBUG_STUBS_ENABLE=y
# CONFIG_INT_WDT is not set
# CONFIG_TASK_WDT is not set
CONFIG_BROWNOUT_DET=y
CONFIG_BROWNOUT_DET_LVL_SEL_0=y
# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set
CONFIG_BROWNOUT_DET_LVL=0
CONFIG_REDUCE_PHY_TX_POWER=y
CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y
# CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set
# CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set
# CONFIG_ESP32_TIME_SYSCALL_USE_NONE is not set
CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y
# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL is not set
# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC is not set
# CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256 is not set
CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024
CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000
CONFIG_ESP32_XTAL_FREQ_40=y
# CONFIG_ESP32_XTAL_FREQ_26 is not set
# CONFIG_ESP32_XTAL_FREQ_AUTO is not set
CONFIG_ESP32_XTAL_FREQ=40
# CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set
# CONFIG_ESP_TIMER_PROFILING is not set
# CONFIG_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
# CONFIG_PM_ENABLE is not set
CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y
CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y
CONFIG_ADC_CAL_LUT_ENABLE=y
# CONFIG_EVENT_LOOP_PROFILING is not set
CONFIG_POST_EVENTS_FROM_ISR=y
CONFIG_POST_EVENTS_FROM_IRAM_ISR=y
CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y
CONFIG_HTTPD_MAX_REQ_HDR_LEN=512
CONFIG_HTTPD_MAX_URI_LEN=512
CONFIG_HTTPD_ERR_RESP_NO_DELAY=y
# CONFIG_OTA_ALLOW_HTTP is not set
CONFIG_SW_COEXIST_ENABLE=y
# CONFIG_SW_COEXIST_PREFERENCE_WIFI is not set
# CONFIG_SW_COEXIST_PREFERENCE_BT is not set
CONFIG_SW_COEXIST_PREFERENCE_BALANCE=y
CONFIG_SW_COEXIST_PREFERENCE_VALUE=2
CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y
CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32
# CONFIG_ESP32_WIFI_CSI_ENABLED is not set
CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
CONFIG_ESP32_WIFI_TX_BA_WIN=6
CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
CONFIG_ESP32_WIFI_RX_BA_WIN=6
CONFIG_ESP32_WIFI_NVS_ENABLED=y
CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set
CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
# CONFIG_ESP32_WIFI_DEBUG_LOG_ENABLE is not set
CONFIG_ESP32_WIFI_IRAM_OPT=y
CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
CONFIG_ESP32_PHY_MAX_TX_POWER=20
# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set
# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set
CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y
# CONFIG_ESP32_ENABLE_COREDUMP is not set
CONFIG_DMA_RX_BUF_NUM=10
CONFIG_DMA_TX_BUF_NUM=10
CONFIG_EMAC_L2_TO_L3_RX_BUF_MODE=y
CONFIG_EMAC_CHECK_LINK_PERIOD_MS=2000
CONFIG_EMAC_TASK_PRIORITY=20
CONFIG_EMAC_TASK_STACK_SIZE=3072
# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set
CONFIG_FATFS_CODEPAGE_437=y
# CONFIG_FATFS_CODEPAGE_720 is not set
# CONFIG_FATFS_CODEPAGE_737 is not set
# CONFIG_FATFS_CODEPAGE_771 is not set
# CONFIG_FATFS_CODEPAGE_775 is not set
# CONFIG_FATFS_CODEPAGE_850 is not set
# CONFIG_FATFS_CODEPAGE_852 is not set
# CONFIG_FATFS_CODEPAGE_855 is not set
# CONFIG_FATFS_CODEPAGE_857 is not set
# CONFIG_FATFS_CODEPAGE_860 is not set
# CONFIG_FATFS_CODEPAGE_861 is not set
# CONFIG_FATFS_CODEPAGE_862 is not set
# CONFIG_FATFS_CODEPAGE_863 is not set
# CONFIG_FATFS_CODEPAGE_864 is not set
# CONFIG_FATFS_CODEPAGE_865 is not set
# CONFIG_FATFS_CODEPAGE_866 is not set
# CONFIG_FATFS_CODEPAGE_869 is not set
# CONFIG_FATFS_CODEPAGE_932 is not set
# CONFIG_FATFS_CODEPAGE_936 is not set
# CONFIG_FATFS_CODEPAGE_949 is not set
# CONFIG_FATFS_CODEPAGE_950 is not set
CONFIG_FATFS_CODEPAGE=437
CONFIG_FATFS_LFN_NONE=y
# CONFIG_FATFS_LFN_HEAP is not set
# CONFIG_FATFS_LFN_STACK is not set
CONFIG_FATFS_FS_LOCK=0
CONFIG_FATFS_TIMEOUT_MS=10000
CONFIG_FATFS_PER_FILE_CACHE=y
CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150
CONFIG_MB_MASTER_DELAY_MS_CONVERT=200
CONFIG_MB_QUEUE_LENGTH=20
CONFIG_MB_SERIAL_TASK_STACK_SIZE=2048
CONFIG_MB_SERIAL_BUF_SIZE=256
CONFIG_MB_SERIAL_TASK_PRIO=10
# CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT is not set
CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20
CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
CONFIG_MB_CONTROLLER_STACK_SIZE=4096
CONFIG_MB_EVENT_QUEUE_TIMEOUT=20
CONFIG_MB_TIMER_PORT_ENABLED=y
CONFIG_MB_TIMER_GROUP=0
CONFIG_MB_TIMER_INDEX=0
# CONFIG_FREERTOS_UNICORE is not set
CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
CONFIG_FREERTOS_CORETIMER_0=y
# CONFIG_FREERTOS_CORETIMER_1 is not set
CONFIG_FREERTOS_HZ=1000
CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set
CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y
# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set
CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1
CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y
# CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE is not set
# CONFIG_FREERTOS_ASSERT_DISABLE is not set
CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536
CONFIG_FREERTOS_ISR_STACKSIZE=1536
# CONFIG_FREERTOS_LEGACY_HOOKS is not set
CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
# CONFIG_SUPPORT_STATIC_ALLOCATION is not set
CONFIG_TIMER_TASK_PRIORITY=1
CONFIG_TIMER_TASK_STACK_DEPTH=2048
CONFIG_TIMER_QUEUE_LENGTH=10
CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set
# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
# CONFIG_FREERTOS_DEBUG_INTERNALS is not set
CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
CONFIG_HEAP_POISONING_DISABLED=y
# CONFIG_HEAP_POISONING_LIGHT is not set
# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set
CONFIG_HEAP_TRACING_OFF=y
# CONFIG_HEAP_TRACING_STANDALONE is not set
# CONFIG_HEAP_TRACING_TOHOST is not set
# CONFIG_HEAP_TRACING is not set
CONFIG_LIBSODIUM_USE_MBEDTLS_SHA=y
# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set
# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set
CONFIG_LOG_DEFAULT_LEVEL_INFO=y
# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
CONFIG_LOG_DEFAULT_LEVEL=3
CONFIG_LOG_COLORS=y
# CONFIG_L2_TO_L3_COPY is not set
# CONFIG_LWIP_IRAM_OPTIMIZATION is not set
CONFIG_LWIP_MAX_SOCKETS=10
# CONFIG_USE_ONLY_LWIP_SELECT is not set
CONFIG_LWIP_SO_REUSE=y
CONFIG_LWIP_SO_REUSE_RXTOALL=y
# CONFIG_LWIP_SO_RCVBUF is not set
CONFIG_LWIP_DHCP_MAX_NTP_SERVERS=1
# CONFIG_LWIP_IP_FRAG is not set
# CONFIG_LWIP_IP_REASSEMBLY is not set
# CONFIG_LWIP_STATS is not set
# CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set
CONFIG_ESP_GRATUITOUS_ARP=y
CONFIG_GARP_TMR_INTERVAL=60
CONFIG_TCPIP_RECVMBOX_SIZE=32
CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set
CONFIG_LWIP_DHCPS_LEASE_UNIT=60
CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
# CONFIG_LWIP_AUTOIP is not set
CONFIG_LWIP_NETIF_LOOPBACK=y
CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8
CONFIG_LWIP_MAX_ACTIVE_TCP=16
CONFIG_LWIP_MAX_LISTENING_TCP=16
CONFIG_TCP_MAXRTX=12
CONFIG_TCP_SYNMAXRTX=6
CONFIG_TCP_MSS=1436
CONFIG_TCP_MSL=60000
CONFIG_TCP_SND_BUF_DEFAULT=5744
CONFIG_TCP_WND_DEFAULT=5744
CONFIG_TCP_RECVMBOX_SIZE=6
CONFIG_TCP_QUEUE_OOSEQ=y
# CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
CONFIG_TCP_OVERSIZE_MSS=y
# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set
# CONFIG_TCP_OVERSIZE_DISABLE is not set
CONFIG_LWIP_MAX_UDP_PCBS=16
CONFIG_UDP_RECVMBOX_SIZE=6
CONFIG_TCPIP_TASK_STACK_SIZE=3072
CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set
# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set
CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF
# CONFIG_PPP_SUPPORT is not set
# CONFIG_LWIP_MULTICAST_PING is not set
# CONFIG_LWIP_BROADCAST_PING is not set
CONFIG_LWIP_MAX_RAW_PCBS=16
CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set
# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set
CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN=16384
# CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN is not set
# CONFIG_MBEDTLS_DEBUG is not set
CONFIG_MBEDTLS_HARDWARE_AES=y
# CONFIG_MBEDTLS_HARDWARE_MPI is not set
# CONFIG_MBEDTLS_HARDWARE_SHA is not set
CONFIG_MBEDTLS_HAVE_TIME=y
# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
# CONFIG_MBEDTLS_TLS_DISABLED is not set
CONFIG_MBEDTLS_TLS_SERVER=y
CONFIG_MBEDTLS_TLS_CLIENT=y
CONFIG_MBEDTLS_TLS_ENABLED=y
# CONFIG_MBEDTLS_PSK_MODES is not set
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y
CONFIG_MBEDTLS_SSL_RENEGOTIATION=y
# CONFIG_MBEDTLS_SSL_PROTO_SSL3 is not set
CONFIG_MBEDTLS_SSL_PROTO_TLS1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set
CONFIG_MBEDTLS_SSL_ALPN=y
CONFIG_MBEDTLS_SSL_SESSION_TICKETS=y
CONFIG_MBEDTLS_AES_C=y
# CONFIG_MBEDTLS_CAMELLIA_C is not set
# CONFIG_MBEDTLS_DES_C is not set
CONFIG_MBEDTLS_RC4_DISABLED=y
# CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT is not set
# CONFIG_MBEDTLS_RC4_ENABLED is not set
# CONFIG_MBEDTLS_BLOWFISH_C is not set
# CONFIG_MBEDTLS_XTEA_C is not set
CONFIG_MBEDTLS_CCM_C=y
CONFIG_MBEDTLS_GCM_C=y
# CONFIG_MBEDTLS_RIPEMD160_C is not set
CONFIG_MBEDTLS_PEM_PARSE_C=y
CONFIG_MBEDTLS_PEM_WRITE_C=y
CONFIG_MBEDTLS_X509_CRL_PARSE_C=y
CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
CONFIG_MBEDTLS_ECP_C=y
CONFIG_MBEDTLS_ECDH_C=y
CONFIG_MBEDTLS_ECDSA_C=y
CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y
CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
CONFIG_MDNS_MAX_SERVICES=10
CONFIG_MQTT_PROTOCOL_311=y
CONFIG_MQTT_TRANSPORT_SSL=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y
# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set
# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set
# CONFIG_MQTT_CUSTOM_OUTBOX is not set
# CONFIG_OPENSSL_DEBUG is not set
CONFIG_OPENSSL_ASSERT_DO_NOTHING=y
# CONFIG_OPENSSL_ASSERT_EXIT is not set
CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
CONFIG_PTHREAD_STACK_MIN=768
CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y
# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set
# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set
CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1
CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread"
# CONFIG_SPI_FLASH_VERIFY_WRITE is not set
# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set
CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y
CONFIG_SPIFFS_MAX_PARTITIONS=3
CONFIG_SPIFFS_CACHE=y
CONFIG_SPIFFS_CACHE_WR=y
# CONFIG_SPIFFS_CACHE_STATS is not set
CONFIG_SPIFFS_PAGE_CHECK=y
CONFIG_SPIFFS_GC_MAX_RUNS=10
# CONFIG_SPIFFS_GC_STATS is not set
CONFIG_SPIFFS_PAGE_SIZE=256
CONFIG_SPIFFS_OBJ_NAME_LEN=32
CONFIG_SPIFFS_USE_MAGIC=y
CONFIG_SPIFFS_USE_MAGIC_LENGTH=y
CONFIG_SPIFFS_META_LENGTH=4
CONFIG_SPIFFS_USE_MTIME=y
# CONFIG_SPIFFS_DBG is not set
# CONFIG_SPIFFS_API_DBG is not set
# CONFIG_SPIFFS_GC_DBG is not set
# CONFIG_SPIFFS_CACHE_DBG is not set
# CONFIG_SPIFFS_CHECK_DBG is not set
# CONFIG_SPIFFS_TEST_VISUALISATION is not set
CONFIG_IP_LOST_TIMER_INTERVAL=120
CONFIG_TCPIP_LWIP=y
CONFIG_UNITY_ENABLE_FLOAT=y
CONFIG_UNITY_ENABLE_DOUBLE=y
# CONFIG_UNITY_ENABLE_COLOR is not set
CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
# CONFIG_UNITY_ENABLE_FIXTURE is not set
CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
CONFIG_SUPPORT_TERMIOS=y
CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
CONFIG_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
# CONFIG_WL_SECTOR_SIZE_512 is not set
CONFIG_WL_SECTOR_SIZE_4096=y
CONFIG_WL_SECTOR_SIZE=4096
# CONFIG_LEGACY_INCLUDE_COMMON_HEADERS is not set
# Deprecated options for backward compatibility
CONFIG_TOOLPREFIX="xtensa-esp32-elf-"
CONFIG_PYTHON="python"
CONFIG_MAKE_WARN_UNDEFINED_VARIABLES=y
# End of deprecated options

Binary file not shown.

View File

@ -627,13 +627,11 @@ Example Datasheet</description>
<package name="SW_JS102011JCQN">
<wire x1="-4.25" y1="1.8" x2="4.25" y2="1.8" width="0.127" layer="51"/>
<wire x1="4.25" y1="1.8" x2="4.25" y2="-1.8" width="0.127" layer="51"/>
<wire x1="4.25" y1="-1.8" x2="-4.25" y2="-1.8" width="0.127" layer="51"/>
<wire x1="-4.25" y1="-1.8" x2="-4.25" y2="1.8" width="0.127" layer="51"/>
<wire x1="-4.25" y1="1.8" x2="-0.88" y2="1.8" width="0.127" layer="21"/>
<wire x1="0.88" y1="1.8" x2="4.25" y2="1.8" width="0.127" layer="21"/>
<wire x1="-4.25" y1="-1.8" x2="-4.25" y2="1.8" width="0.127" layer="21"/>
<wire x1="4.25" y1="1.8" x2="4.25" y2="-1.8" width="0.127" layer="21"/>
<wire x1="1.66" y1="-1.8" x2="-1.66" y2="-1.8" width="0.127" layer="21"/>
<wire x1="-4.5" y1="2.25" x2="4.5" y2="2.25" width="0.05" layer="39"/>
<wire x1="4.5" y1="2.25" x2="4.5" y2="-2.25" width="0.05" layer="39"/>
<wire x1="4.5" y1="-2.25" x2="-4.5" y2="-2.25" width="0.05" layer="39"/>
@ -641,6 +639,10 @@ Example Datasheet</description>
<smd name="2" x="0" y="1.2" dx="1.6" dy="1" layer="1" rot="R90"/>
<smd name="1" x="-2.5" y="-1.2" dx="1.6" dy="1" layer="1" rot="R90"/>
<smd name="3" x="2.5" y="-1.2" dx="1.6" dy="1" layer="1" rot="R90"/>
<wire x1="-0.635" y1="-1.778" x2="-1.27" y2="-2.159" width="0.127" layer="21"/>
<wire x1="-1.27" y1="-2.159" x2="-0.635" y2="-2.54" width="0.127" layer="21"/>
<text x="0.254" y="-2.286" size="0.254" layer="21" rot="SR180">ON</text>
<wire x1="-1.27" y1="-2.159" x2="1.016" y2="-2.159" width="0.127" layer="21"/>
</package>
</packages>
</library>
@ -1098,12 +1100,12 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be
<vertex x="-30.4546" y="21.0312"/>
</polygon>
<polygon width="0.1524" layer="16">
<vertex x="-30.4546" y="29.21"/>
<vertex x="-30.4546" y="21.082"/>
<vertex x="-39.7383" y="29.1465"/>
<vertex x="-39.7383" y="21.082"/>
<vertex x="-41.1226" y="21.082"/>
<vertex x="-41.1226" y="6.6294"/>
<vertex x="-1.9304" y="6.6294"/>
<vertex x="-1.9304" y="29.21"/>
<vertex x="-1.9304" y="29.1465"/>
</polygon>
<contactref element="C11" pad="1"/>
<via x="-28.1178" y="25.654" extent="1-16" drill="0.35"/>
@ -1111,16 +1113,16 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be
<via x="-29.3624" y="24.6634" extent="1-16" drill="0.35"/>
<via x="-29.1846" y="27.051" extent="1-16" drill="0.35"/>
<polygon width="0.1524" layer="2">
<vertex x="-30.4546" y="29.1338"/>
<vertex x="-30.4546" y="21.1074"/>
<vertex x="-39.7383" y="29.1338"/>
<vertex x="-39.7383" y="21.1074"/>
<vertex x="-41.0718" y="21.1074"/>
<vertex x="-41.0718" y="6.477"/>
<vertex x="-2.1336" y="6.477"/>
<vertex x="-2.1336" y="29.1338"/>
</polygon>
<polygon width="0.1524" layer="15">
<vertex x="-30.4546" y="29.1592"/>
<vertex x="-30.4546" y="21.082"/>
<vertex x="-39.7256" y="29.1592"/>
<vertex x="-39.7256" y="21.082"/>
<vertex x="-41.1226" y="21.082"/>
<vertex x="-41.1226" y="6.477"/>
<vertex x="-2.1082" y="6.477"/>
@ -1156,7 +1158,7 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be
<wire x1="-28.0128" y1="18.6462" x2="-28.0412" y2="18.6178" width="0.1524" layer="1"/>
<wire x1="-25.7668" y1="18.6168125" x2="-25.7668" y2="18.6208" width="0.1524" layer="1"/>
<wire x1="-25.7668" y1="18.6168125" x2="-25.95530625" y2="18.42830625" width="0.1524" layer="1"/>
<wire x1="-23.7208" y1="9.5578" x2="-23.7208" y2="12.87083125" width="0.1524" layer="16"/>
<wire x1="-23.7208" y1="12.87083125" x2="-23.7208" y2="10.3452" width="0.1524" layer="16"/>
<wire x1="-26.5068" y1="18.6208" x2="-26.31430625" y2="18.42830625" width="0.1524" layer="1"/>
<wire x1="-26.31430625" y1="18.42830625" x2="-25.95530625" y2="18.42830625" width="0.1524" layer="1"/>
<wire x1="-23.6324125" y1="18.1755" x2="-28.7419" y2="18.1755" width="0.1524" layer="16"/>
@ -1165,8 +1167,9 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be
<wire x1="-28.1428" y1="18.7194" x2="-28.677" y2="18.7194" width="0.1524" layer="1"/>
<wire x1="-28.9814" y1="18.415" x2="-28.677" y2="18.7194" width="0.1524" layer="1"/>
<wire x1="-28.1428" y1="18.7194" x2="-28.0412" y2="18.6178" width="0.1524" layer="1"/>
<contactref element="S2" pad="3"/>
<wire x1="-24.7504" y1="8.5282" x2="-23.7208" y2="9.5578" width="0.1524" layer="16"/>
<contactref element="S2" pad="1"/>
<wire x1="-23.7208" y1="10.3452" x2="-21.9038" y2="8.5282" width="0.1524" layer="16"/>
<wire x1="-21.9038" y1="8.5282" x2="-19.7504" y2="8.5282" width="0.1524" layer="16"/>
</signal>
<signal name="3.3V">
<contactref element="C23" pad="1"/>
@ -1216,20 +1219,11 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be
<wire x1="-24.1981" y1="27.1016" x2="-23.876" y2="27.4237" width="0.1524" layer="1"/>
<wire x1="-19.9372" y1="20.1252" x2="-21.18934375" y2="20.1252" width="0.1524" layer="1"/>
<wire x1="-21.59574375" y1="19.7188" x2="-24.9098" y2="19.7188" width="0.1524" layer="1"/>
<contactref element="U2" pad="6"/>
<contactref element="U2" pad="5"/>
<wire x1="-24.8158" y1="27.101" x2="-24.1987" y2="27.101" width="0.1524" layer="1"/>
<wire x1="-24.1987" y1="27.101" x2="-23.876" y2="27.4237" width="0.1524" layer="1"/>
<wire x1="-24.8158" y1="27.101" x2="-26.1874" y2="27.101" width="0.1524" layer="1"/>
<wire x1="-26.1874" y1="27.101" x2="-26.188" y2="27.1016" width="0.1524" layer="1"/>
<wire x1="-21.18934375" y1="20.1252" x2="-21.59574375" y2="19.7188" width="0.1524" layer="1"/>
<contactref element="C10" pad="1"/>
<wire x1="-14.7058" y1="23.7944" x2="-14.7058" y2="24.2944" width="0.1524" layer="1"/>
<via x="-14.605" y="23.1648" extent="1-16" drill="0.35"/>
<wire x1="-15.8584125" y1="27.3022" x2="-16.1205875" y2="27.3022" width="0.1524" layer="16"/>
<wire x1="-16.1205875" y1="27.3022" x2="-16.2193875" y2="27.401" width="0.1524" layer="16"/>
<wire x1="-14.605" y1="23.1648" x2="-14.605" y2="26.0487875" width="0.1524" layer="16"/>
<wire x1="-14.605" y1="26.0487875" x2="-15.8584125" y2="27.3022" width="0.1524" layer="16"/>
<wire x1="-23.876" y1="27.4237" x2="-23.3419" y2="27.9578" width="0.1524" layer="1"/>
<wire x1="-23.3419" y1="27.9578" x2="-21.9492" y2="27.9578" width="0.1524" layer="1"/>
<contactref element="C12" pad="2"/>
@ -1241,14 +1235,6 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be
<wire x1="-25.7668" y1="21.3491" x2="-25.9842" y2="21.3491" width="0.1524" layer="1"/>
<wire x1="-24.9098" y1="19.7188" x2="-25.0478" y2="19.5808" width="0.1524" layer="1"/>
<wire x1="-25.0478" y1="19.5808" x2="-25.7668" y2="19.5808" width="0.1524" layer="1"/>
<wire x1="-14.605" y1="22.86" x2="-14.605" y2="23.1648" width="0.1524" layer="1"/>
<wire x1="-15.8242" y1="21.6154" x2="-15.6436" y2="21.796" width="0.1524" layer="1"/>
<wire x1="-15.6436" y1="21.796" x2="-15.6436" y2="22.1653875" width="0.1524" layer="1"/>
<wire x1="-15.6436" y1="22.1653875" x2="-15.2819875" y2="22.527" width="0.1524" layer="1"/>
<wire x1="-15.2819875" y1="22.527" x2="-14.938" y2="22.527" width="0.1524" layer="1"/>
<wire x1="-14.938" y1="22.527" x2="-14.605" y2="22.86" width="0.1524" layer="1"/>
<wire x1="-14.605" y1="23.1648" x2="-14.605" y2="23.6936" width="0.1524" layer="1"/>
<wire x1="-14.605" y1="23.6936" x2="-14.7058" y2="23.7944" width="0.1524" layer="1"/>
<contactref element="R1" pad="1"/>
<wire x1="-25.9842" y1="21.4122" x2="-25.9842" y2="21.3491" width="0.1524" layer="1"/>
</signal>
@ -1582,8 +1568,10 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be
<signal name="ESPANT">
<contactref element="U1" pad="P$2"/>
<contactref element="U$1" pad="FEED"/>
<wire x1="-23.5682" y1="26.3042" x2="-30.9778" y2="26.3042" width="0.254" layer="1"/>
<wire x1="-31.0388" y1="26.3652" x2="-30.9778" y2="26.3042" width="0.254" layer="1"/>
<wire x1="-30.9778" y1="26.3042" x2="-31.0388" y2="26.3652" width="0.3048" layer="1"/>
<wire x1="-23.5682" y1="26.3042" x2="-24.0767" y2="26.3042" width="0.254" layer="1"/>
<wire x1="-24.0767" y1="26.3042" x2="-24.0792" y2="26.3017" width="0.254" layer="1"/>
<wire x1="-24.0767" y1="26.3042" x2="-30.9778" y2="26.3042" width="0.3048" layer="1"/>
</signal>
<signal name="D+">
<contactref element="J3" pad="3"/>
@ -1655,6 +1643,19 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be
<wire x1="-9.1694" y1="27.178" x2="-9.852" y2="27.178" width="0.1524" layer="1"/>
<wire x1="-9.852" y1="27.178" x2="-10.086" y2="26.944" width="0.1524" layer="1"/>
</signal>
<signal name="3.3V_USB">
<contactref element="U2" pad="6"/>
<contactref element="U2" pad="5"/>
<contactref element="C10" pad="1"/>
<wire x1="-14.7058" y1="23.7944" x2="-14.7058" y2="24.2944" width="0.1524" layer="1"/>
<wire x1="-15.8242" y1="21.6154" x2="-15.6436" y2="21.796" width="0.1524" layer="1"/>
<wire x1="-15.6436" y1="21.796" x2="-15.6436" y2="22.1653875" width="0.1524" layer="1"/>
<wire x1="-15.6436" y1="22.1653875" x2="-15.2819875" y2="22.527" width="0.1524" layer="1"/>
<wire x1="-15.2819875" y1="22.527" x2="-14.938" y2="22.527" width="0.1524" layer="1"/>
<wire x1="-14.938" y1="22.527" x2="-14.605" y2="22.86" width="0.1524" layer="1"/>
<wire x1="-14.605" y1="22.86" x2="-14.605" y2="23.6936" width="0.1524" layer="1"/>
<wire x1="-14.605" y1="23.6936" x2="-14.7058" y2="23.7944" width="0.1524" layer="1"/>
</signal>
</signals>
<mfgpreviewcolors>
<mfgpreviewcolor name="soldermaskcolor" color="0xC8008000"/>

View File

@ -1816,13 +1816,11 @@ Datasheet</description>
<package name="SW_JS102011JCQN">
<wire x1="-4.25" y1="1.8" x2="4.25" y2="1.8" width="0.127" layer="51"/>
<wire x1="4.25" y1="1.8" x2="4.25" y2="-1.8" width="0.127" layer="51"/>
<wire x1="4.25" y1="-1.8" x2="-4.25" y2="-1.8" width="0.127" layer="51"/>
<wire x1="-4.25" y1="-1.8" x2="-4.25" y2="1.8" width="0.127" layer="51"/>
<wire x1="-4.25" y1="1.8" x2="-0.88" y2="1.8" width="0.127" layer="21"/>
<wire x1="0.88" y1="1.8" x2="4.25" y2="1.8" width="0.127" layer="21"/>
<wire x1="-4.25" y1="-1.8" x2="-4.25" y2="1.8" width="0.127" layer="21"/>
<wire x1="4.25" y1="1.8" x2="4.25" y2="-1.8" width="0.127" layer="21"/>
<wire x1="1.66" y1="-1.8" x2="-1.66" y2="-1.8" width="0.127" layer="21"/>
<wire x1="-4.5" y1="2.25" x2="4.5" y2="2.25" width="0.05" layer="39"/>
<wire x1="4.5" y1="2.25" x2="4.5" y2="-2.25" width="0.05" layer="39"/>
<wire x1="4.5" y1="-2.25" x2="-4.5" y2="-2.25" width="0.05" layer="39"/>
@ -1830,6 +1828,10 @@ Datasheet</description>
<smd name="2" x="0" y="1.2" dx="1.6" dy="1" layer="1" rot="R90"/>
<smd name="1" x="-2.5" y="-1.2" dx="1.6" dy="1" layer="1" rot="R90"/>
<smd name="3" x="2.5" y="-1.2" dx="1.6" dy="1" layer="1" rot="R90"/>
<wire x1="-0.635" y1="-1.778" x2="-1.27" y2="-2.159" width="0.127" layer="21"/>
<wire x1="-1.27" y1="-2.159" x2="-0.635" y2="-2.54" width="0.127" layer="21"/>
<text x="0.254" y="-2.286" size="0.254" layer="21" rot="SR180">ON</text>
<wire x1="-1.27" y1="-2.159" x2="1.016" y2="-2.159" width="0.127" layer="21"/>
</package>
</packages>
<symbols>
@ -2450,11 +2452,12 @@ Datasheet</description>
<wire x1="170.18" y1="101.6" x2="170.18" y2="96.52" width="0.1524" layer="91"/>
<wire x1="177.8" y1="88.9" x2="177.8" y2="96.52" width="0.1524" layer="91"/>
<junction x="177.8" y="96.52"/>
<label x="167.64" y="101.6" size="1.778" layer="95"/>
<label x="170.18" y="99.06" size="1.778" layer="95"/>
<pinref part="C24" gate="G$1" pin="1"/>
<pinref part="S2" gate="G$1" pin="3"/>
<wire x1="165.1" y1="101.6" x2="170.18" y2="101.6" width="0.1524" layer="91"/>
<wire x1="170.18" y1="101.6" x2="170.18" y2="106.68" width="0.1524" layer="91"/>
<junction x="170.18" y="101.6"/>
<pinref part="S2" gate="G$1" pin="1"/>
<wire x1="170.18" y1="106.68" x2="165.1" y2="106.68" width="0.1524" layer="91"/>
</segment>
</net>
<net name="3.3V" class="0">
@ -2469,18 +2472,6 @@ Datasheet</description>
<wire x1="203.2" y1="96.52" x2="220.98" y2="96.52" width="0.1524" layer="91"/>
<junction x="220.98" y="104.14"/>
</segment>
<segment>
<pinref part="U2" gate="IC" pin="VDD"/>
<wire x1="88.9" y1="68.58" x2="86.36" y2="68.58" width="0.1524" layer="91"/>
<pinref part="U2" gate="IC" pin="VIO"/>
<wire x1="86.36" y1="66.04" x2="88.9" y2="66.04" width="0.1524" layer="91"/>
<wire x1="88.9" y1="66.04" x2="88.9" y2="68.58" width="0.1524" layer="91"/>
<label x="93.98" y="66.04" size="1.778" layer="95"/>
<wire x1="88.9" y1="66.04" x2="93.98" y2="66.04" width="0.1524" layer="91"/>
<junction x="88.9" y="66.04"/>
<pinref part="C10" gate="G$1" pin="1"/>
<junction x="88.9" y="68.58"/>
</segment>
</net>
<net name="VBUS" class="0">
<segment>
@ -2627,6 +2618,20 @@ Datasheet</description>
<label x="40.64" y="48.26" size="1.778" layer="95"/>
</segment>
</net>
<net name="3.3V_USB" class="0">
<segment>
<pinref part="U2" gate="IC" pin="VDD"/>
<wire x1="88.9" y1="68.58" x2="86.36" y2="68.58" width="0.1524" layer="91"/>
<pinref part="U2" gate="IC" pin="VIO"/>
<wire x1="86.36" y1="66.04" x2="88.9" y2="66.04" width="0.1524" layer="91"/>
<wire x1="88.9" y1="66.04" x2="88.9" y2="68.58" width="0.1524" layer="91"/>
<label x="93.98" y="66.04" size="1.778" layer="95"/>
<wire x1="88.9" y1="66.04" x2="93.98" y2="66.04" width="0.1524" layer="91"/>
<junction x="88.9" y="66.04"/>
<pinref part="C10" gate="G$1" pin="1"/>
<junction x="88.9" y="68.58"/>
</segment>
</net>
</nets>
</sheet>
<sheet>

View File

@ -1,24 +1,28 @@
# BlueCubeMod
ESP32 based GameCube Controller Bluetooth conversion using BTstack
ESP32 based GameCube Controller Bluetooth conversion for Nintendo Switch
v1:
Mac/PC/PS4 supported (tested using Dolphin Emulator on Mac)
For Switch/RaspberryPi, use an 8Bitdo USB adapter
v2:
Switch support only - no adapter required
## Wiring:
- Connect pins 23 and 18 to GameCube controller's data pin (Red)
- Connect GND to controller's ground pin (Black)
## Build instructions:
## Build instructions(v2):
- Get esp-idf https://docs.espressif.com/projects/esp-idf/en/latest/get-started/
- Use this esp-idf fork here: https://github.com/NathanReeves/esp-idf
- Get BTstack - Dev Branch (as of 4/29) https://github.com/bluekitchen/btstack/tree/master/port/esp32
- Set up the esp-idf environment: https://docs.espressif.com/projects/esp-idf/en/latest/get-started/
- Clone BlueCubeMod
- Get the BlueCubeModv2 firmware
- If you havent flashed an ESP32 project before, you need the port name of ESP32 for the config file. If using unix system, to get the port name of a USB device run: