mirror of
https://github.com/raphnet/4nes4snes
synced 2024-11-14 21:15:06 -05:00
befc9be7f1
- Support for Atmega168. Use Makefile.atmega168. - New USB VID/PID - Simplified main loop by remving setIdle/getIdle implementation. Optional for joysticks according to HID specification appendix G.
78 lines
2.1 KiB
Makefile
78 lines
2.1 KiB
Makefile
CC=avr-gcc
|
|
AS=$(CC)
|
|
LD=$(CC)
|
|
PROGNAME=4nes4snes-m8
|
|
CPU=atmega8
|
|
|
|
CFLAGS=-Wall -Os -Iusbdrv -I. -mmcu=$(CPU) -DF_CPU=12000000L #-DDEBUG_LEVEL=1
|
|
LDFLAGS=-Wl,-Map=$(PROGNAME).map -mmcu=$(CPU)
|
|
AVRDUDE=avrdude -p m8 -P usb -c avrispmkII
|
|
|
|
OBJS=usbdrv/usbdrv.o usbdrv/usbdrvasm.o usbdrv/oddebug.o main.o fournsnes.o devdesc.o
|
|
|
|
HEXFILE=$(PROGNAME).hex
|
|
ELFFILE=$(PROGNAME).elf
|
|
|
|
# symbolic targets:
|
|
all: $(HEXFILE)
|
|
|
|
.c.o:
|
|
$(CC) $(CFLAGS) -c $< -o $@
|
|
|
|
.S.o:
|
|
$(CC) $(CFLAGS) -x assembler-with-cpp -c $< -o $@
|
|
# "-x assembler-with-cpp" should not be necessary since this is the default
|
|
# file type for the .S (with capital S) extension. However, upper case
|
|
# characters are not always preserved on Windows. To ensure WinAVR
|
|
# compatibility define the file type manually.
|
|
|
|
.c.s:
|
|
$(CC) $(CFLAGS) -S $< -o $@
|
|
|
|
|
|
clean:
|
|
rm -f $(HEXFILE) main.lst main.obj main.cof main.list main.map main.eep.hex main.bin *.o usbdrv/*.o main.s usbdrv/oddebug.s usbdrv/usbdrv.s
|
|
|
|
# file targets:
|
|
$(ELFFILE): $(OBJS)
|
|
$(LD) $(LDFLAGS) -o $(ELFFILE) $(OBJS)
|
|
|
|
$(HEXFILE): $(ELFFILE)
|
|
rm -f $(HEXFILE)
|
|
avr-objcopy -j .text -j .data -O ihex $(ELFFILE) $(HEXFILE)
|
|
./checksize $(ELFFILE)
|
|
|
|
|
|
flash: $(HEXFILE)
|
|
$(AVRDUDE) -Uflash:w:$(HEXFILE) -B 1.0
|
|
|
|
# Fuse high byte:
|
|
# 0xc9 = 1 1 0 0 1 0 0 1 <-- BOOTRST (boot reset vector at 0x0000)
|
|
# ^ ^ ^ ^ ^ ^ ^------ BOOTSZ0
|
|
# | | | | | +-------- BOOTSZ1
|
|
# | | | | + --------- EESAVE (don't preserve EEPROM over chip erase)
|
|
# | | | +-------------- CKOPT (full output swing)
|
|
# | | +---------------- SPIEN (allow serial programming)
|
|
# | +------------------ WDTON (WDT not always on)
|
|
# +-------------------- RSTDISBL (reset pin is enabled)
|
|
# Fuse low byte:
|
|
# 0x9f = 1 0 0 1 1 1 1 1
|
|
# ^ ^ \ / \--+--/
|
|
# | | | +------- CKSEL 3..0 (external >8M crystal)
|
|
# | | +--------------- SUT 1..0 (crystal osc, BOD enabled)
|
|
# | +------------------ BODEN (BrownOut Detector enabled)
|
|
# +-------------------- BODLEVEL (2.7V)
|
|
|
|
LFUSE=0x9F
|
|
HFUSE=0xC9
|
|
|
|
fuse:
|
|
$(AVRDUDE) -e -Uhfuse:w:$(HFUSE):m -Ulfuse:w:$(LFUSE):m -B 20.0 -v
|
|
|
|
chip_erase:
|
|
$(AVRDUDE) -e -B 1.0 -F
|
|
|
|
reset:
|
|
$(AVRDUDE) -B 1.0 -F
|
|
|