uinput-mapper/c/confs/techinc_arcade.h
2013-05-14 23:53:37 +02:00

192 lines
6.1 KiB
C

/*
* Copyright Merlijn Wajer 2012
*
* This is the uinput-mapper configuration file.
*
* We are still working out all the details, but it basically boils down to the
* following: You write the configuration entirely in the C preprocessor by
* adding the right commands (macros) to the right sections.
*
*
* As of now, there are three sections:
*
* - GLOBAL_MAP;
* This is where you set the amount of devices to be emulated (currently
* called JOYCOUNT) and the INPUT_PATH.
*
* - CONFIGURE_JOYSTICKS:
* This is where you tell uinput-mapper what buttons your new joysticks (or
* other devices) should expose. Any button not exposed here will never be
* send.
*
* Macros that make sense to use here:
* - JOYSTICK_SET_OPT(<opt>, <bit>, <device>)
* - JOYSTICK_ADD_KEY(<key>, <bit to set>, <device>)
* - JOYSTICK_SET_LIM(<absmin|absmax>, <value>, <key>)
*
* JOYSTICK_SET_LIM is mostly used for ABS_HATs.
*
* - JOYMAP:
*
* Set the key mappings here.
*
* Macros that make sense here:
* - KEYMAP(in_type, in_key, out_key, out_type, device, in_device, val) \
* - in_type: Key type of input key
* - in_key: Keycode of input key
* - out_key: Key code of output key
* - device: output device
* - in_device: Device to accept keys from. -1 for all devices.
* - val: function or statement applied to value.
*
* Notes:
* - To expose a joystick device, expose the BTN_JOYSTICK ``button'' with
* JOYSTICK_ADD_KEY
* - To expose a mouse device, expose (at least) the BTN_LEFT button with
* JOYSTICK_ADD_KEY
*
* ----------------------------------------------------------------------------
*/
#include "config_functions.h"
/* -------------------------------------------------------------------------- */
/* ----------------------------- FIRST SECTION ----------------------------- */
/* -------------------------------------------------------------------------- */
#ifndef H_GLOBAL_MAP
#define H_GLOBAL_MAP
/* Set up amount of joysticks here */
#define JOYCOUNT 2
/* Set up amount of input devices here */
#define INPUT_DEVICE_COUNT 2
#define INPUT_DEVICE_ANY -1
#endif
/* -------------------------------------------------------------------------- */
/* ------------------- FIRST AND A HALF SECTION ----------------------------- */
/* -------------------------------------------------------------------------- */
#ifdef H_CONFIGURE_EVENTS
#ifndef H_CONFIGURE_EVENTS_SEEN
#define H_CONFIGURE_EVENTS_SEEN
ADD_INPUT_PATH("/dev/input/by-id/usb-Cypress_I-PAC_Arcade_Control_Interface-event-kbd", 0)
ADD_INPUT_PATH("/dev/input/by-id/usb-Dell_Dell_USB_Keyboard-event-kbd", 1)
#endif
#endif
/* -------------------------------------------------------------------------- */
/* ----------------------------- SECOND SECTION ----------------------------- */
/* -------------------------------------------------------------------------- */
#ifdef H_CONFIGURE_JOYSTICKS
#ifndef H_CONFIGURE_JOYSTICKS_SEEN
#define H_CONFIGURE_JOYSTICKS_SEEN
/* Configure first joystick.
*
* Here we just tell the program what keys event we will expose and what
* keys we want to use.
*
* If a key is not enabled here, it will never be passed.
*/
/* We want to send ABS and KEY events */
MAPPER_SET_OPT(EV_ABS, UI_SET_EVBIT, 0)
MAPPER_SET_OPT(EV_KEY, UI_SET_EVBIT, 0)
/* Hats:
* We set the absmax and absmin; otherwise the hats make no sense.
*/
MAPPER_ADD_KEY(ABS_HAT0X, UI_SET_ABSBIT, 0)
JOYSTICK_SET_LIM(absmax, 1, ABS_HAT0X)
JOYSTICK_SET_LIM(absmin, -1, ABS_HAT0X)
MAPPER_ADD_KEY(ABS_HAT0Y, UI_SET_ABSBIT, 0)
JOYSTICK_SET_LIM(absmax, 1, ABS_HAT0Y)
JOYSTICK_SET_LIM(absmin, -1, ABS_HAT0Y)
/* XXX: ALWAYS SET BTN_JOYSTICK TO EXPOSE A JOYSTICK DEVICE */
MAPPER_ADD_KEY(BTN_JOYSTICK, UI_SET_KEYBIT, 0)
/* Buttons. */
MAPPER_ADD_KEY(BTN_0, UI_SET_KEYBIT, 0)
MAPPER_ADD_KEY(BTN_1, UI_SET_KEYBIT, 0)
MAPPER_ADD_KEY(BTN_2, UI_SET_KEYBIT, 0)
MAPPER_ADD_KEY(BTN_3, UI_SET_KEYBIT, 0)
/* Second joystick ; same comments as first one */
MAPPER_SET_OPT(EV_ABS, UI_SET_EVBIT, 1)
MAPPER_SET_OPT(EV_KEY, UI_SET_EVBIT, 1)
MAPPER_ADD_KEY(ABS_HAT0X, UI_SET_ABSBIT, 1)
JOYSTICK_SET_LIM(absmax, 1, ABS_HAT0X)
JOYSTICK_SET_LIM(absmin, -1, ABS_HAT0X)
MAPPER_ADD_KEY(ABS_HAT0Y, UI_SET_ABSBIT, 1)
JOYSTICK_SET_LIM(absmax, 1, ABS_HAT0X)
JOYSTICK_SET_LIM(absmin, -1, ABS_HAT0X)
MAPPER_ADD_KEY(BTN_JOYSTICK, UI_SET_KEYBIT, 1)
MAPPER_ADD_KEY(BTN_0, UI_SET_KEYBIT, 1)
MAPPER_ADD_KEY(BTN_1, UI_SET_KEYBIT, 1)
MAPPER_ADD_KEY(BTN_2, UI_SET_KEYBIT, 1)
MAPPER_ADD_KEY(BTN_3, UI_SET_KEYBIT, 1)
#endif
#endif
/* -------------------------------------------------------------------------- */
/* ----------------------------- THIRD SECTION ----------------------------- */
/* -------------------------------------------------------------------------- */
#ifdef H_JOYMAP
#ifndef H_JOYMAP_SEEN
#define H_JOYMAP_SEEN
/* First joystick */
LEGAL_VALUE(e.value == 1 || e.value == 0,
/* HAT */
KEYMAP(EV_KEY, KEY_UP, ABS_HAT0Y, EV_ABS, 0, INPUT_DEVICE_ANY, -)
KEYMAP(EV_KEY, KEY_DOWN, ABS_HAT0Y, EV_ABS, 0, INPUT_DEVICE_ANY, +)
KEYMAP(EV_KEY, KEY_LEFT, ABS_HAT0X, EV_ABS, 0, INPUT_DEVICE_ANY, -)
KEYMAP(EV_KEY, KEY_RIGHT, ABS_HAT0X, EV_ABS, 0, INPUT_DEVICE_ANY, +)
/* Red buttons */
KEYMAP(EV_KEY, KEY_LEFTCTRL, BTN_0, EV_KEY, 0, INPUT_DEVICE_ANY, +)
KEYMAP(EV_KEY, KEY_LEFTALT, BTN_1, EV_KEY, 0, INPUT_DEVICE_ANY, +)
KEYMAP(EV_KEY, KEY_SPACE, BTN_2, EV_KEY, 0, INPUT_DEVICE_ANY, +)
/* Yellow button */
KEYMAP(EV_KEY, KEY_1, BTN_3, EV_KEY, 0, INPUT_DEVICE_ANY, +)
)
/* Second joystick */
LEGAL_VALUE(e.value == 1 || e.value == 0,
/* HAT */
KEYMAP(EV_KEY, KEY_R, ABS_HAT0Y, EV_ABS, 1, INPUT_DEVICE_ANY, -)
KEYMAP(EV_KEY, KEY_F, ABS_HAT0Y, EV_ABS, 1, INPUT_DEVICE_ANY, +)
KEYMAP(EV_KEY, KEY_D, ABS_HAT0X, EV_ABS, 1, INPUT_DEVICE_ANY, -)
KEYMAP(EV_KEY, KEY_G, ABS_HAT0X, EV_ABS, 1, INPUT_DEVICE_ANY, +)
/* Red buttons */
KEYMAP(EV_KEY, KEY_A, BTN_0, EV_KEY, 1, INPUT_DEVICE_ANY, +)
KEYMAP(EV_KEY, KEY_S, BTN_1, EV_KEY, 1, INPUT_DEVICE_ANY, +)
KEYMAP(EV_KEY, KEY_Q, BTN_2, EV_KEY, 1, INPUT_DEVICE_ANY, +)
/* Yellow button */
KEYMAP(EV_KEY, KEY_2, BTN_3, EV_KEY, 1, INPUT_DEVICE_ANY, +)
)
#endif
#endif