We already use msg() and error() in here, might as well just use the
standard functions. In addition, fix one translated message that would
have printed ERROR twice if anyone ever saw it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Allow one of 4 archive extensions: .tar{,.gz,.xz,.bz2} for each of the 2
valid repo extensions: .db and .files. Check for this via
'verify_repo_extension' directly after option parsing to assert that
this extension is present, and again after files have been added to get
the proper archive option for bsdtar.
Signed-off-by: Dave Reisner <d@falconindy.com>
Dump the whole conditional and filter the contents of the directory to
create an empty or non-empty archive.
Signed-off-by: Dave Reisner <d@falconindy.com>
Only one of these looked like a real red flag, in find_requiredby(), but
it doesn't hurt to fix several of them up anyway.
Unfortunately, we can't turn this on universally due to things like the
sync(), remove(), etc. builtins which we often use as variable names.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#24893.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We have just looped through the list of files, so might as well get
the count as we go.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses FS#24904. In a normal upgrade case, this replacement
seems to work just fine. However, when doing a sync "replace" type
upgrade, we weren't properly handling this edge case due to path
comparison not ignoring trailing slashes. Fix this by pruning any
trailing slashes past a certain point of file conflict resolution where
we no longer need them, which allows us to safely detect cases such as
now tested in the new pactest.
Signed-off-by: Dan McGee <dan@archlinux.org>
While researching the root cause of FS#24904, I couldn't help but clean
up some of the cruft in here. A few whitespace/line-wrapping issues, but
also fix shadowed variables and add some const where applicable.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a whole lot of bloat to parse pacman.conf and only a few lines to
use the list of sync DBs instead of the local DB.
Dan: I fully plan on this being temporary and us finding a better way in
the future to parse pacman.conf from multiple binaries. Adding a
standalone config parser is probably not the right way of going about
things, but for now it is by far the easiest.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We can reorganize things a bit to not require reading a directory-only
entry first (or at all). This was noticed while working on some pactest
improvements, but should be a good step forward anyway.
Also make _alpm_splitname() a bit more generic in where it stores the
data it parses.
Signed-off-by: Dan McGee <dan@archlinux.org>
Discovered this when doing some pactest rewrite work to generate
archives in memory only. If a sync database file or PKGINFO file is
missing a newline on the final line, the text from that line gets tossed
aside and never read into the package struct. This is pretty critical
when that last line is a depend or something.
Signed-off-by: Dan McGee <dan@archlinux.org>
This ranks high on the code readability scale. The same function formats
all of our data and writes to the metadata file at once.
Signed-off-by: Dave Reisner <d@falconindy.com>
Fields like groups and depends should be stored as arrays. This requires
rewriting our write_list_entry function to accomodate our new data type.
This new function will not write to a file, but rather only format it.
Signed-off-by: Dave Reisner <d@falconindy.com>
grep and sed aren't needed here, and this removes the truly ugly
manipulation of IFS. The process substituion could just as well be a
herestring, but it breaks vim's syntax highlighting. Style over
substance, mang.
Signed-off-by: Dave Reisner <d@falconindy.com>
* 'master' of git://projects.archlinux.org/pacman:
pactree: carry a list of databases for dep resolution
makepkg: Remove a lone quotation mark
makepkg: remove the cleancache option
Don't require a transaction for sync DB updates
Move locking functions to handle
Add a 'valid' flag to the database object
Move database 'version' check to registration time
Do database signature checking at load time
Declare an alpm_list which, for now, only holds our local database.
walk_deps and walk_reverse_deps are refactored to account for this, and
a helper function is added to wrap alpm_db_get_pkg for traversing a
list.
This is groundwork for letting pactree walk the sync DBs.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a fairly useless feature given all it does is an "rm" on a
directory. It is also unlikely that you would want to remove the
entire SRCDEST anyway, but rather just the old files.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
These operate on the handle, and the state is stored on the handle, so
move them where they belong. Up until now only the transaction stuff
calls them, but this will soon change and alpm_db_update() will handle
locking all on its own.
Signed-off-by: Dan McGee <dan@archlinux.org>
Start by converting all of our flags to a 'status' bitmask (pkgcache
status, grpcache status). Add a new 'valid' flag as well. This will let
us keep track if the database itself has been marked valid in whatever
fashion.
For local databases at the moment we ensure there are no depends files;
for sync databases we ensure the PGP signature is valid if
required/requested. The loading of the pkgcache is prohibited if the
database is invalid.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is another step toward doing both local database validation
(ensuring we don't have depends files) and sync database validation (via
signatures if present) when the database is registered.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the ideal place to do it as all clients should be checking the
return value and ensuring there are no errors. This is similar to
pkg_load().
We also add an additional step of validation after we download a new
database; a subsequent '-y' operation can potentially invalidate the
original check at registration time.
Note that this implementation is still a bit naive; if a signature is
invalid it is currently impossible to refresh and re-download the file
without manually deleting it first. Similarly, if one downloads a
database and the check fails, the database object is still there and can
be used. These shortcomings will be addressed in a future commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
The format required for selection of packages within the group selection
dialog is not entirely obvious, so provide some documentation.
Fixes FS#24134.
Signed-off-by: Allan McRae <allan@archlinux.org>
There was a lot of inconsistency in how strings that should not be
translated (program names, option flags, PKGBUILD directives, etc) were
handled. This patch moves them all outside the gettext invocation for
consistency and to prevent accidental translation.
Note that some of these may need reverted if they cause difficulties in
translation due to gettext usage in bash not taking positional parameters
for arguments. A quick survey of current translations indicates that this
issue will be rare. Also, we should be able to catch these before a full
string freeze given we are going to probably need a "developer preview"
release before the next release series.
Signed-off-by: Allan McRae <allan@archlinux.org>
Sync database are no longer exploded on the filesystem. Rework the logic
used to generate our test databases so we can create them completely in
memory without having to write the individual files to disk at all. The
local database is unaffected.
Note that several shortcomings in libalpm parsing were discovered by
this change, which have since been temporarily patched around in this
test suite:
* archive_fgets() did not properly handle a file that ended in a
non-newline, and would silently drop the data in this line.
* sync database with only the file entries and not the directories would
fail to parse properly, and even cause segfaults in some cases.
Signed-off-by: Dan McGee <dan@archlinux.org>
For the files count when loading from a package, we can keep a counter.
The two in the frontend were completely useless due to the fact that if
sync_dbs is non-NULL, alpm_list_count() will always be greater than 0.
Signed-off-by: Dan McGee <dan@archlinux.org>
This doesn't fix the real (bigger) problem of failing to parse sync
databases without directory entries, but it does prevent the parser from
segfaulting when the first desc file encountered did not have a
directory entry, among other conditions.
Signed-off-by: Dan McGee <dan@archlinux.org>
b899099 made path checking a bit more strict than I had intended, and
would actually forbid creation of a repo in $PWD if only the filename
was specified. readlink would be the fun and easy solution here, but
it's avoided due to portability issues, making the validation process a
bit more verbose.
Signed-off-by: Dan McGee <dan@archlinux.org>
