Add code to conf.c that parses the new SigLevel directive. An
overwhelming number of options are presented, but most users will still
be fine with the Never/Optional/Required trio. More advanced users can
combine these or any of the other options on a 'SigLevel = ' line, which
is parsed in a left-to-right fashion and flags turned on and off
accordingly. For example, all three of these will net the same config:
SigLevel = Required PackageOptional
SigLevel = Optional DatabaseRequired
SigLevel = DatabaseRequired PackageOptional
Additionally, database-specific lines assume you wish to start with any
global default that has been set. For example, if any of the above lines
were in the [options] section, something such as:
SigLevel = PackageRequired PackageAllowMarginal
Would continue to enforce required database signatures.
Inspiration-by: Kerrick Staley <mail@kerrickstaley.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This ensures we are actually making correct use of the information gpgme
is returning to us. Marginal being allowed was obvious before, but
Unknown should deal with trust level, and not the presence or lack
thereof of a public key to validate the signature with.
Return status and validity information in two separate values so check
methods and the frontend can use them independently. For now, we treat
expired keys as valid, while expired signatures are invalid.
Signed-off-by: Dan McGee <dan@archlinux.org>
Pacman did a great job of having almost (but not quite) duplicate code
paths through the sync and upgrade code. We can use the same logic in
both upgrade in sync once the targets are resolved, so extract a
function and delete a bunch of code.
Signed-off-by: Dan McGee <dan@archlinux.org>
Hardcoding anything always ends up burning you, and the arbitrary length
of 64 here did just that. Add the ability to reallocate the readline
buffer for longer inputs if necessary, and add other error checking as
approprate. This also plugs one small memory leak of the group
processing code selection array.
Addresses FS#24253.
Signed-off-by: Dan McGee <dan@archlinux.org>
This accomplishes quite a few things with one rather invasive change.
1. Iteration is much more performant, due to a reduction in pointer
chasing and linear item access.
2. Data structures are smaller- we no longer have the overhead of the
linked list as the file struts are now laid out consecutively in
memory.
3. Memory allocation has been massively reworked. Before, we would
allocate three different pieces of memory per file item- the list
struct, the file struct, and the copied filename. What this resulted
in was massive fragmentation of memory when loading filelists since
the memory allocator had to leave holes all over the place. The new
situation here now removes the need for any list item allocation;
allocates the file structs in contiguous memory (and reallocs as
necessary), leaving only the strings as individually allocated. Tests
using valgrind (massif) show some pretty significant memory
reductions on the worst case `pacman -Ql > /dev/null` (366387 files
on my machine):
Before:
Peak heap: 54,416,024 B
Useful heap: 36,840,692 B
Extra heap: 17,575,332 B
After:
Peak heap: 38,004,352 B
Useful heap: 28,101,347 B
Extra heap: 9,903,005 B
Several small helper methods have been introduced, including a list to
array conversion helper as well as a filelist merge sort that works
directly on arrays.
Signed-off-by: Dan McGee <dan@archlinux.org>
This can only ever operate on the local database, and a local package at
that. Change the function signature to take a handle and package object,
add the relevant asserts, and ensure the frontend can detect the package
not found condition when finding packages to pass to this method.
Signed-off-by: Dan McGee <dan@archlinux.org>
We did some funny stuff here before to allow specifying fully-qualified
package names, such as 'testing/gcc' or 'core/gcc'. However, it was done
by duplicating code, not to mention an early escape if a repository
could not be found for an early target. Something like `pacman -Si
foo/bar core/gcc' would not give expected results, although `pacman -Si
bar gcc' would.
Clean up the code, remove strncpy() usage, and clarify the error
messages a bit.
Signed-off-by: Dan McGee <dan@archlinux.org>
The supposed safety blanket of this function is better handled by
explicit length checking and usages of strlen() on known NULL-terminated
strings rather than hoping things fit in a buffer. We also have no need
to fully fill a PATH_MAX length variable with NULLs every time as long
as a single terminating byte is there. Remove usages of it by using
strcpy() or memcpy() as appropriate, after doing length checks via
strlen().
Signed-off-by: Dan McGee <dan@archlinux.org>
The only thing this accessor did was remove the const qualifier
given our entire list implementation requires passing around the
head anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
They are placeholders, but important for things like trying to re-sync a
database missing a signature. By using the alpm_db_validity() method at
the right time, a client can take the appropriate action with these
invalid databases as necessary.
In pacman's case, we disallow just about anything that involves looking
at a sync database outside of an '-Sy' operation (although we do check
the validity immediately after). A few operations are still permitted-
'-Q' ops that don't touch sync databases as well as '-R'.
Signed-off-by: Dan McGee <dan@archlinux.org>
Show output in -Qip for each package signature, which includes the UID
string from the key ("Joe User <joe@example.com>") and the validity of
said key. Example output:
Signatures : Valid signature from "Dan McGee <dpmcgee@gmail.com>"
Unknown signature from "<Key Unknown>"
Invalid signature from "Dan McGee <dpmcgee@gmail.com>"
Also add a backend alpm_sigresult_cleanup() function since memory
allocation took place on this object, and we need some way of freeing
it.
Signed-off-by: Dan McGee <dan@archlinux.org>
This gives us more granularity than the former Never/Optional/Always
trifecta. The frontend still uses these values temporarily but that will
be changed in a future patch.
* Use 'siglevel' consistenly in method names, 'level' as variable name
* The level becomes an enum bitmask value for flexibility
* Signature check methods now return a array of status codes rather than
a simple integer success/failure value. This allows callers to
determine whether things such as an unknown signature are valid.
* Specific signature error codes mostly disappear in favor of the above
returned status code; pm_errno is now set only to PKG_INVALID_SIG or
DB_INVALID_SIG as appropriate.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to capture size and mode data when building filelists
from package files. Future patches will take advantage of this newly
available information, and frontends can use it as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a convention that is widely followed in *nix and posix-ish
environments. We should follow it, too.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Some of these are legit (the backup hash NULL checks), while others are
either extemely unlikely or just impossible for the static code
analysis to prove, but are worth adding anyway because they have little
overhead.
Signed-off-by: Dan McGee <dan@archlinux.org>
Using grp instead of group is a small saving at the cost of clarity.
Rename the following functions:
alpm_option_get_ignoregrps -> alpm_option_get_ignoregroups
alpm_option_add_ignoregrp -> alpm_option_add_ignoregroup
alpm_option_set_ignoregrps -> alpm_option_set_ignoregroups
alpm_option_remove_ignoregrp -> alpm_option_remove_ignoregroup
alpm_db_readgrp -> alpm_db_readgroup
alpm_db_get_grpcache -> alpm_db_get_groupcache
alpm_find_grp_pkgs -> alpm_find_group_pkgs
Signed-off-by: Allan McRae <allan@archlinux.org>
Only one of these looked like a real red flag, in find_requiredby(), but
it doesn't hurt to fix several of them up anyway.
Unfortunately, we can't turn this on universally due to things like the
sync(), remove(), etc. builtins which we often use as variable names.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a whole lot of bloat to parse pacman.conf and only a few lines to
use the list of sync DBs instead of the local DB.
Dan: I fully plan on this being temporary and us finding a better way in
the future to parse pacman.conf from multiple binaries. Adding a
standalone config parser is probably not the right way of going about
things, but for now it is by far the easiest.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Declare an alpm_list which, for now, only holds our local database.
walk_deps and walk_reverse_deps are refactored to account for this, and
a helper function is added to wrap alpm_db_get_pkg for traversing a
list.
This is groundwork for letting pactree walk the sync DBs.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Start by converting all of our flags to a 'status' bitmask (pkgcache
status, grpcache status). Add a new 'valid' flag as well. This will let
us keep track if the database itself has been marked valid in whatever
fashion.
For local databases at the moment we ensure there are no depends files;
for sync databases we ensure the PGP signature is valid if
required/requested. The loading of the pkgcache is prohibited if the
database is invalid.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is another step toward doing both local database validation
(ensuring we don't have depends files) and sync database validation (via
signatures if present) when the database is registered.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the ideal place to do it as all clients should be checking the
return value and ensuring there are no errors. This is similar to
pkg_load().
We also add an additional step of validation after we download a new
database; a subsequent '-y' operation can potentially invalidate the
original check at registration time.
Note that this implementation is still a bit naive; if a signature is
invalid it is currently impossible to refresh and re-download the file
without manually deleting it first. Similarly, if one downloads a
database and the check fails, the database object is still there and can
be used. These shortcomings will be addressed in a future commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
For the files count when loading from a package, we can keep a counter.
The two in the frontend were completely useless due to the fact that if
sync_dbs is non-NULL, alpm_list_count() will always be greater than 0.
Signed-off-by: Dan McGee <dan@archlinux.org>
Now that we have performed the split, prune the catalogs of all
scripts-only messages.
All old messages were pruned from the files using the following command:
sed -i -e '/^#\~/,$d' *.po
Note: the diff on this commit looks much less insane if the --patience
option is used.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the first step at separating the pacman message catalog and the
scripts message catalog. Makefiles, configure.ac, and other such files
are adjusted accordingly, as well as renaming files. The TEXTDOMAIN of
scripts is also adjusted.
Note that no actual pot or po files get changed here; these will get
pruned in a future commit so each catalog contains only the necessary
messages.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to separate the name and hash elements in one place and
not scatter different parsing code all over the place, including both
the frontend and backend.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add detection for stdout being attached to a tty device. When this check
fails, return a default width of 0, which callers interpret to mean
"don't wrap". Conversely, when our term ioctl suceeds but returns 0, we
interpret this to mean a tty with an unknown width (e.g., a serial
console), in which case we default to a sane value of 80.
Signed-off-by: Dave Reisner <d@falconindy.com>
This removes the need to write accessor methods for every type we have,
and simplifies the API. Any type that doesn't need magic* can be
converted in this fashion to make it easier for frontend applications to
use, as well as make it less of a pain to introduce new such structs in
the future.
* "magic" meaning something like pmpkg_t where values can be lazy loaded.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is more in line with reality and what we have our makepkg, etc.
options named anyway.
Original-patch-by: Kerrick Staley <mail@kerrickstaley.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This method is old, it doesn't adequately check for a NULL server list,
and can easily be done using better API method we provide these days.
All former users of this method can get similar results by calling
alpm_db_get_servers() and using the data from the returned server list.
Signed-off-by: Dan McGee <dan@archlinux.org>
We now parse an entire repo section and store all information about it.
When the next section is encountered or the end of the root config file
is reached, we will then process the stored information.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Function doxygen documentation
* Reuse a single strlen() call
* Prevent infinite recursion (limit to 10 levels)
* Other small cleanups
Signed-off-by: Dan McGee <dan@archlinux.org>
Even though we currently don't use it here in the backend, we might as
well pass it in since we used it earlier.
Signed-off-by: Dan McGee <dan@archlinux.org>
This makes these functions consistent with the rest of the transaction
related API calls. We do an additional assert to ensure the handle
attached to the package is the same as the handle passed in.
Signed-off-by: Dan McGee <dan@archlinux.org>
A few of these snuck in as of late, some from the table display patches
that were using the previous format before we changed it after the 3.5.X
major release.
Noticed-by: Kerrick Staley <mail@kerrickstaley.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
commit c1f742d775 broke what was one of the tenants of out output-
if piping pacman output somewhere else, we shouldn't ever try to
line-wrap and indent print our output. This makes it easier for tools to
use output from pacman -Ss, -Qs, -Qi, etc. list_display() unfortunately
was given a default value of 80 rather than 0, so fix this.
Next, make some additional changes that ensure we don't insert an
unnecessary blank line if for some crazy reason the indent level (such
as on -Qi output) is greater than the number of columns. Accomplish this
by printing the first item unconditionally as we do in
list_display_linebreak().
Finally, teach indentprint to not wrap if the number of columns is less
than the indent level, this prevents some forms of ridiculous output
such as the following:
Install Date : Wed
08
Jun
2011
04:39:19
AM
CDT
Signed-off-by: Dan McGee <dan@archlinux.org>
Begin enforcing the need to pass a handle. This allows us to remove one
more extern handle declaration from the backend.
Signed-off-by: Dan McGee <dan@archlinux.org>
This requires a lot of line changes, but not many functional changes as
more often than not our handle variable is already available in some
fashion.
Signed-off-by: Dan McGee <dan@archlinux.org>
The few remaining instances were utilized for buffers in calls to
snprintf() and realpath(). Both of these functions will always ensure
the returned value is padded with '\0', so there is no need for the
extra byte.
Signed-off-by: Dan McGee <dan@archlinux.org>
When only downloading a package that is in IgnorePkg, pacman
incorrectly asks about installing.
e.g. with <pkg> in IgnorePkg in pacman.conf:
> pacman -Sddw <pkg>
:: <pkg> is in IgnorePkg/IgnoreGroup. Install anyway? [Y/n]
This output is now silenced when downloading only.
Signed-off-by: Allan McRae <allan@archlinux.org>
If it is different than the raw installed size metric we already show,
compute the net upgrade size. For some sync operations, this can even be
negative if newer packages are smaller than the ones they replace
locally. Implements FS#12566.
Example:
Targets (1): telepathy-glib-0.14.7-1
Total Download Size: 1.07 MiB
Total Installed Size: 15.72 MiB
Net Upgrade Size: -0.29 MiB
Signed-off-by: Dan McGee <dan@archlinux.org>
If getcols() returns 0, we were getting stuck before in a loop of no
return. Teach getcols() to take a default value to return if the width
is unknown, and use this everywhere as appropriate.
Also make a few other cleanups while diagnosing this issue, such as
const-ifying some variables.
Noticed-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is at best a hack around the way we currently do our --print magic,
but at least prevents someone from shooting themselves in the foot as
indicated in FS#24287.
Signed-off-by: Dan McGee <dan@archlinux.org>
This removes the need to strdup() the section name at every decent into
an Include statement, as well as having duplicate DB pointers around
that are never used independently.
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently we have one call that has all sorts of crazy behavior and doesn't
make a whole lot of sense. Go from one method to the normal four methods we
have for all of our other lists we use in the library to make it a lot
easier for a frontend to manipulate server lists.
Signed-off-by: Dan McGee <dan@archlinux.org>
This ensures we call any alpm_option type functions before registering
databases, making sure all paths and other defaults (e.g. sig
verification levels) have been set first. This will ensure we can
continue to allow crazy config files where [options] doesn't come first.
The diffstat on this commit is misleading; view with
-w/--ignore-all-space to get a better idea of what needed to be touched.
Signed-off-by: Dan McGee <dan@archlinux.org>
Use a few structs to hold configuration values we change given certain
options so we can be const-correct with string assignment across the
board. Behavior should be completely unchanged.
Signed-off-by: Dan McGee <dan@archlinux.org>
Both md5sum verification and PGP verification can and should be done at
package load time. This allows verification to happen as early as
possible for packages provided by filename and loaded in the frontend,
and moves more stuff out of sync_commit that doesn't really belong
there. This should also set the stage for simplified parallel loading of
packages later down the road.
Signed-off-by: Dan McGee <dan@archlinux.org>
The various "level" values were a bit crazy to decipher, and we were
doing some very interesting comparisons in certain places. Break it out
into two parameters instead so we can seperate the type from the extra
information display, and do things accordingly.
Nothing changes with the display of any of the five types we currently
show: -Si, -Sii, -Qi, -Qii, -Qip.
Something to note- we should expose the PKG_FROM enum type somehow, this
patch leaves the door open to do that quite easily.
Signed-off-by: Dan McGee <dan@archlinux.org>
This does touch a lot of things, and hopefully doesn't break things on
other platforms, but allows us to also clean up a bunch of crud that no
longer needs to be there.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the standard, and we have had a few of these introduced lately
that should not be here.
Done with:
find -name '*.c' | xargs sed -i -e 's#if (#if(#g'
find -name '*.c' | xargs sed -i -e 's#while (#while(#g'
Signed-off-by: Dan McGee <dan@archlinux.org>
* add _alpm_db_get_sigverify_level
* add alpm_option_{get,set}_default_sigverify
And set the default verification level to OPTIONAL if not set otherwise.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
If enabled, displays package lists for upgrade, sync and remove
operations formatted as a table. Falls back to default list display if
insufficient terminal columns are available.
Example output:
:: Starting full system upgrade...
:: Replace libjpeg with testing/libjpeg-turbo? [Y/n]
resolving dependencies...
looking for inter-conflicts...
Remove (1):
Name Old Version Size
libjpeg 8.3.0-1 0.83 MB
Total Removed Size: 0.83 MB
Targets (5):
Name Old Version New Version Size
libjpeg-turbo 1.1.0-1 0.20 MB
linux-firmware 20110201-1 20110227-1 8.23 MB
ncurses 5.7-4 5.8-1 0.92 MB
ppl 0.11.1-1 0.11.2-1 2.74 MB
v4l-utils 0.8.1-1 0.8.3-1 0.23 MB
Total Download Size: 12.32 MB
Total Installed Size: 58.82 MB
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
table_display takes a list of lists of strings (representing the table
cells) and displays them formatted as a table.
The exact format depends on the longest string in each column.
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Row handling is moved to its own function in preparation for verbose
package lists.
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Display {KiB, MiB, ...} instead of {KB, MB, ...} since that's what's
actually being displayed.
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Converts the given size in bytes in two possible ways:
1) target_unit is specified (!= 0): size is converted to target unit.
2) target_unit is not specified (== '\0'): size is converted to the first
unit which will bring size to below 2048.
If specified, label will point to the long label ('MB') if long_labels is
set or the short label ('M') if it is not.
Dan: use '\0' rather than 0 for the special value as a matter of coding
style for char variables.
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Dan: The commit message originally referenced "VerbosePkgLists", but I'm
going to change the name of the option. In addition, this patch serves
a purpose being standalone- we should really do things like this with
-S --print and hopefully -Q --print in the future.
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently the only error case then when handle == NULL.
However several handle functions return -1 on this error,
and a uniform API makes things simpler.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
spotted by clang-analyzer (strcmp with NULL rpath is bad)
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Addresses FS#23492, where the question was shown without knowing what
one was answering to. Ensure we flush our output streams before printing
the question, and flush the stream on which we ask the question before
waiting for an answer.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Address FS#23433 by documenting -d vs. -dd
* Drop the useless "as well", "also", "too", and "that won't break
packages" strings from -R usage
* Fix alignment of multiline strings in source (no string change)
Signed-off-by: Dan McGee <dan@archlinux.org>
Once we do this, add support for VerifySig to pactest. We just check if
the repo name contains Always, Never or Optional to determine the value
of VerifySig. The default is Never. pacman uses Always by default but
this is not suitable for pactest.
Original-work-by: shankar <jatheendra@gmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
GnuPG looks for configuration files and keyrings in its home directory.
For a user, that is typically ~/.gnupg.
This patch causes pacman to use /etc/pacman.d/gnupg/ as the default
GnuPG home. One may override the default using --gpgdir on the command-line
or GPGDir in pacman's configuration file.
Signed-off-by: Chris Brannon <cmbrannon@cox.net>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove unnecessary output when using -Sp. Fixes FS#23340.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is by no means a guarantee of this behavior remaining the same in
the future, but it is easy enough to do what we used to in this case by
delaying any sort of error condition until after we are completely done
parsing options. Addresses FS#23370.
Signed-off-by: Dan McGee <dan@archlinux.org>
This was discussed and more or less agreed upon on the mailing list. A
huge checkin, but if we just do it and let people adjust the pain will
end soon enough. Rebasing should be relatively straighforward for anyone
that sees conflicts; just be sure you use the new return style if
possible.
The following semantic patch was used to do the change, along with some
hand-massaging in order to preserve parenthesis where appropriate:
The semantic match that finds this problem is as follows, although some
hand-massaging was done in order to keep parenthesis where appropriate:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression a;
@@
- return(a);
+ return a;
// </smpl>
A macros_file was also provided with the following content:
Additional steps taken, mainly for ASSERT() macros:
$ sed -i -e 's#return(NULL)#return NULL#' lib/libalpm/*.c
$ sed -i -e 's#return(-1)#return -1#' lib/libalpm/*.c
Signed-off-by: Dan McGee <dan@archlinux.org>
Noted in FS#23342. When the user attempts to install an ignored package
and answers no when asked whether to install it, pacman bails out with:
"error: target not found: packagename"
This is because satisfiers are not found for the package and execution
continues to process_group(), where the package is treated as a group
(which does not exist).
In addition, test ignore006.py is updated with PACMAN_RETCODE=0 since
saying no to installing an ignored package should not be considered an
error.
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This makes all the pacman developers' jobs harder as we have to switch
files whenever running multiple pacman versions and are using newly
introduced options. Instead of erroring out, print warnings and continue
on.
This patch also fixes a const-correctness issue. We immediately cast a
'const char *' to a 'char *' in setrepeatingoption(), which is just
plain wrong as we manipulate the underlying string. Fix the types and
remove the now unnecessary variable.
Finally, a few messages change here for consistency and clarity and
because we continue parsing rather than bailing out on a problem.
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents a regression for people who enjoy piping yes to pacman to
avoid prompts.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
A lot of these were places that should have used the same message but
didn't, or were very easy to convert to using the same message and
letting some of the burden off of the translators.
Signed-off-by: Dan McGee <dan@archlinux.org>
Printing the exact size seems to make more sense for scripting contexts.
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com>
[Dan: adjust for master before VerbosePkgLists patches, fix type]
Signed-off-by: Dan McGee <dan@archlinux.org>
Ensure we have a local DB version that is up to par with what we expect
before we go down any road that might modify it. This should prevent
stupid mistakes with the 3.5.X upgrade and people not running
pacman-db-upgrade after the transaction as they will need to.
Signed-off-by: Dan McGee <dan@archlinux.org>
If you were doing a -Qo via xargs, it is at least nice to see what input
caused the error message to occur rather than having a bunch of plain
messages. This matches the style when we can't find the owner of a file.
Signed-off-by: Dan McGee <dan@archlinux.org>
Read the package information for sync/local databases into a pmpkghash_t
structure.
Provide a alpm_db_get_pkgcache_list() method that returns the list from
the hash object. Most usages of alpm_db_get_pkgcache are converted to
this at this stage for ease of implementation. Review whether these are
better accessing the hash table directly at a later stage.
Signed-off-by: Allan McRae <allan@archlinux.org>
-d skips checking the version of a dependency.
-dd skips the whole dependency check.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Florian Pritz <bluewind@server-speed.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
