I started playing around with gcov today and it showed a few places in the
code that we don't test at all. This is the start of ensuring that we
execute most of the code in our codebase.
Signed-off-by: Dan McGee <dan@archlinux.org>
This should simplify our output a bit when it comes to determining whether
or not we need a newline in our output. A "done" message was almost always
immediately followed by another start message anyway (or some other output),
so it really isn't necessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
When a DB is "registered" in libalpm, it goes and tries to create paths and
other BS which is stupid, but a pain in the butt to fix. For now, work
around this terrible behavior by ensuring our paths are always set before we
call any alpm_db_register function.
Signed-off-by: Dan McGee <dan@archlinux.org>
I made pacman path handling a bit odd with my rootdir changes a while back
in order to increase flexability. However, it had a bit of a drawback in
that dbpath/logfile/etc. would not default to being under the rootdir if
that was the only parameter you specified in the config file or on the
command line. (Note: logfile handling was always broken due to the explicit
logfile line required in config files)
Pacman now works as follows:
if a rootdir is specified but not dbpath or logfile:
attempt to place the logfile and dbpath in their default locations under
root
if an explicit dbpath/logfile is specified:
interpret these as absolute paths, regardless of the rootdir setting
if nothing is specified:
fall back to configured defaults
Signed-off-by: Dan McGee <dan@archlinux.org>
During a pacman operation such as a group install, pacman can ask several
questions such as "local version is up to date. Upgrade anyway?". They are
usually all answered either by yes or by no:
* yes when you want to reinstall all the targets.
* no when you only want to install the missing ones (either because you are
installing a group, or because you are copying a pacman -S line from wiki or
whatever).
So instead of asking this question for each target, it is now now configured
with a flag. Yes will be the default -S behavior, No will be achieved with
the --needed flag.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
dump_pkg_sync is now a trivial wrapper for dump_pkg_full
Some smaller changes:
* string_display function added to util.c [prints None in case of empty string]
* Filename field added to -Qip
* rename License to Licenses
* 'Compressed Size' used instead of 'Download Size' for -Qip
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: fix whitespace errors, spacing issues, const modifiers]
Signed-off-by: Dan McGee <dan@archlinux.org>
This pactest checks what happens if a package exists in two sync repos.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: added sync1006, same test with different versions]
Signed-off-by: Dan McGee <dan@archlinux.org>
* memleak found by Nagy in checkdeps
* an useless line found by Nagy in resolvedeps
* data wasn't set to the missing dependencies in sync_prepare
* use the MALLOC macro in resolvedeps
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm_depcmp is simple enough that we shouldn't need constant debug logging,
and the logging we do have in there negatively impacts our speed regardless
of whether we actually are seeing it or not. If it ever needs debugging, it
would be trivial to reimplement it by just temporarily reverting this
commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
Hopefully these are unnecessary, as they were probably added originally to
cover up a problem instead of finding the root cause. I'd rather fail hard
in these cases anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
_alpm_innerconflicts: check for target<->target conflicts
_alpm_outerconflicts: check for target<->localpkg conflicts
This will be useful in sync.c clean-up and in testdb.c
As an application the patch also fixes a misleading message (and a memleak)
in add.c
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
I didn't understand why realpath was called on every files of every filelist
in query_fileowner :
ppath = resolve_path(path);
It turns out this is needed for the diverted files. For example, cddb_get
installs /usr/lib/perl5/site_perl/5.8.8/CDDB_get.pm which actually ends in
/usr/lib/perl5/site_perl/current/CDDB_get.pm .
And for making pacman -Qo /usr/lib/perl5/site_perl/current/CDDB_get.pm ,
realpath has to be called on both the target, and the file in the filelist.
However, realpath is costly, and calling it on every single file resulted
in a poor -Qo performance. Worst case :
pacman -Qo /lib/libz.so.1 0.35s user 1.51s system 99% cpu 1.864 total
So I did a little optimization to avoid calling realpath as much as
possible: first compare the basename of each file.
Result:
src/pacman/pacman -Qo /lib/libz.so.1 0.24s user 0.05s system 99% cpu 0.298
total
Obviously, the difference will be even bigger at the first run (no fs
cache), though it's quite scary on my system : 1.7s vs 40s previously.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
checkdeps and resolvedeps now take both a remove list and an install list as
arguments, allowing dependencies to be calculated correctly.
This broke the sync990 pactest, but this pactest used dependencies and
provides in an unusual way, so it has been changed.
Dan: the sync990 pactest was just plain wrong. It didn't satisfy the
dependencies correctly, so should never have succeeded.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: some variable renaming, clarification in commit message]
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently this only affects -Ss, -Sl, and -Q to output less information (only
package names).
In the future, we can reuse this flag for other things as well.
[Aaron: rewritten as a front-end flag]
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
[Dan: squashed commits together]
Signed-off-by: Dan McGee <dan@archlinux.org>
In the case of a packaging error where install or changelog had bad permissions,
pacman respected the original permissions without trying to fix it - this means
that some operations (changelog) artificially required root permissions to run
In addition, minor function housekeeping on _alpm_unpack
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
This closes out FS#6500 and covers cases where the package names contain regex
characters (i.e. the case of dvd+rw-tools)
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
* The frontend calls alpm_trans_prepare(&data), and in case of errors,
receive the missing dependencies / conflicts / etc in the data pointer.
It apparently needs to free this structure totally with :
alpm_list_free_inner(data, free)
alpm_list_free(data)
So I added alpm_list_free_inner(data, free) in
pacman/{sync.c,remove.c,add,c}
* in _alpm_sync_prepare, the deps and asked lists were not freed in case
of errors (unresolvable conflicts).
Besides the code for handling this case was duplicated.
* in _alpm_remove_commit, free was used instead of alpm_list_free for
newfiles.
* newline fix in pacman/sync.c
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
An alpm_list_free call was missing.
Also make use of alpm_list_free_inner in both _alpm_sync_free and
_alpm_trans_free.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This operation made sense in the days before sync DBs existed, but it no
longer has the same usefulness it once did.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
*.lineno - these show up when you use a shell less-featured than bash
cscope.*.out - These show up when you build reverse databases using -q
Signed-off-by: Dan McGee <dan@archlinux.org>
From now on libalpm informs user about packages which will be
installed/removed in wrong order.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The alpm_get_upgrades was exactly the same as find_replacements +
_alpm_sync_sysupgrade, except that it automatically made the eventual
replacements, without asking the user : Replace %s with %s/%s? [Y/n]
The replace question, asked in find_replacements. can now be skipped by
using a NULL trans argument, so that we get the same behavior as with
alpm_get_upgrades.
So alpm_db_get_upgrades() can now be replaced by
alpm_sync_sysupgrade(db_local, syncdbs).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Note that if you are building manpages with asciidoc now, you must also
have source-highlight installed for it to correctly generate everything.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add some hints so we can use asciidoc on the HACKING document. It is still
readable as text, but a simple 'asciidoc HACKING' command will give you a
nice pretty guide now.
Signed-off-by: Dan McGee <dan@archlinux.org>
As the b96922679e commit showed with two
pactests (which were renamed to depconflict110/111), versioned conflicts are
now possible.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch introduces versioned provisions in "provision 1.0-1" format.
_alpm_db_whatprovides was modified accordingly (added sync500.py),
alpm_depcmp was modified accordingly (add043.py passes now; added add044.py
and add045.py).
Notes:
alpm_db_search now uses the whole versioned %PROVIDES% string in its search.
debug logging was simplified in alpm_depcmp.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xavier: fixed a few typos, duplicate const strings with strdup before
modifying them, put some debugging back in alpm_depcmp, minor code cleanups
(var/function renaming), added a note in PKGBUILD man page.]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: made strcmp checks clearer, added a comment]
Signed-off-by: Dan McGee <dan@archlinux.org>
dash doesn't pass positional parameters to sourced scripts, causing install
scripts to fail. Instead of sourcing the script, make it executable and
call it directly which allows positional parameters to be passed correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
pmdepmissing_t was used for two totally different things :
missing dependencies, and dependency conflicts.
So this patch simply adds a type for dep conflicts,
and convert the code to use it.
This fix the TODO in conflict.c :
/* TODO WTF is a 'depmissing' doing indicating a conflict? */
Additionally, the code in conflict.c now eliminates the duplicated conflicts.
If pkg1 conflicts with pkg2, and pkg2 conflicts with pkg1, only one of them will be stored.
However the conflict handling in sync_prepare (sync.c) is still very asymetrical, and very ugly too.
This should be improved in the future (there is already a pending patch from Nagy that cleans it a lot).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
The names related to conflicts are misleading :
For dependencies conflicts, the type is pmdepmissing,
and the function names contain just "conflict".
For file conflicts, the type is pmconflict,
and some functions contained just "conflict", some others "fileconflict".
So this is the first step for improving the situation.
Original idea/patch from Nagy, but the patch already didn't apply anymore,
so I did it again.
The main difference is that I kept the conflictype, with the following renaming :
pmconflicttype_t -> pmfileconflicttype_t
PM_CONFLICT_TYPE_TARGET -> PM_FILECONFLICT_TARGET
PM_CONFLICT_TYPE_FILE -> PM_FILECONFLICT_FILESYSTEM
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Suggested by stonecrest on irc :
'I think "uninstalled" would be better, as it implies that the package was once
installed and since removed. Otherwise a user might wonder why there are
non-installed pkgs in cache'
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
We discussed this with stonecrest on IRC :
20:46 stonecrest >> someone brings up a good point.. why aren't repos that aren't in the pacman.conf removed from /var/lib/pacman?
20:46 stonecrest >> i have 118mb and 24 dirs in there, but only 5 repos at present
21:26 stonecrest >> shining: i guess you could prompt the user on deleting every dir in /var/lib/pacman.. since it shouldn't happen that often except for
the first time
21:30 stonecrest >> could be part of pacman -Sc.. what else were you thinking?
I already heard about this before, but it sounded dangerous to me. I didn't even think about a simple prompt.
I also didn't know where this code would fit. And it fits well with -Sc, I borrowed most of the code from sync_cleancache.
Example session :
Cache directory: /var/cache/pacman/pkg/
Do you want to remove non-installed packages from cache? [Y/n] n
Database directory: /var/lib/pacman/
Do you want to remove unused repositories? [Y/n]
Do you want to remove /var/lib/pacman/sync/pacman-git? [Y/n]
Do you want to remove /var/lib/pacman/sync/deltatest? [Y/n]
Database directory cleaned up
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
resolvedeps will now search for other satisfiers
when we don't let it add a package from IgnorePkg.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
And check the IgnorePkg handling is done correctly in the other places.
For example, -Qu and -Su will automatically skip the ignored packages (-Su will print a warning),
but -S will install ignored packages anyway, because it was asked explicitly.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This caused more problems than it solved, especially with -Qlp output
and files that are new to the new package.
Signed-off-by: Dan McGee <dan@archlinux.org>
The fallback on providers when a target is not found was already made in the backend :
libalpm/sync.c , _alpm_sync_addtarget .
So I removed it from the frontend.
The sync500 pactest proves this fallback still works correctly.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
