It is pretty annoying to get one, fix it, and then get another. We should be
able to continue on through most of the sanity checks in one go so the user
gets all the error messages at once.
Also ensure $pkgbase is defined by the time we call this function;
previously we printed nothing where a package name should have been due to
this oversight.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add the "buildflags" option, which is useful in its negative form
for disabling CFLAGS, CXXFLAGS and LDFLAGS when building a package.
This is useful when determining of one of these flags is causing
an issue with a package.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
A PKGBUILD can have an option check() function for running test suites
between the build() and package() stages. This function is run by
default but can be disabled globally in with "!check" in BUILDENV in
makepkg.conf. This setting can be controlled on an individual package
basis using makepkg's --check and --nocheck flags. Addition dependencies
needed for running the test suite can be specified in the checkdepends
array and are only checked when running the check() function.
Original-work-by: Jeff C <jeff@kcaccess.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The closing parenthesis of bash arrays needs to be escaped in the ending
address of awk expressions in order to play nicely with implementations
of awk other than gawk. This change provides compatibility with gawk,
nawk and mawk.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently, using $pkgname in a split package package_*() function
always returns the first value in the pkgname array rather than the
name of tha package being packaged. Fix this so $pkgname gives the
expected value.
Fixes FS#22174
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We should always use $BUILDSCRIPT instead of PKGBUILD. The only
remaining uses of PKGBUILD in makekg are in comments.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Check the over-ridden entries for provides, backup, optdepends and
options for illegal entries. Partially fixes FS#16004.
Signed-off-by: Allan McRae <allan@archlinux.org>
The error message that has been removed never gets to print because, given the
same condition, handle_deps throws the same error and then immediately exits
makepkg.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
As check_deps is run in a subshell, exit had the same meaning as return.
Since the intention is to halt makepkg when pacman throws an error other than
127, the enclosing function has to handle error control instead.
Fixes FS#19840
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The escape string isn't necesarily \033; it's determined by what the
particular termcap/info entry for that terminal contains.
Bash uses ncurses functions to expand \e to the _correct_ terminal
escape.
Signed-off-by: Carlos Diaz <839273@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allow it to be a variable in the PKGBUILD as well as propagating it through
to the built package and the package database. We leave some backward
compatibility in place by placing the '%FORCE%' option in the database if
the package contains an epoch; this will be used by older versions of pacman
and more or less ignored by versions that use epoch.
Signed-off-by: Dan McGee <dan@archlinux.org>
BASH is defined when you are actually using bash during configure, which
sucks because it ends up being '/bin/sh', messing up all of our scripts.
Change the name of the variable we use in configure, and also ensure we get
a full path to the executable by using AC_PATH_PROGS rather than
AC_CHECK_PROGS. Finally, change the variable name everywhere we use it.
Signed-off-by: Dan McGee <dan@archlinux.org>
This applies to contrib/ files, our scripts, and the documentation.
Dan: fix 'make clean' in contrib/ directory.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
'mknod <file> p' is apparently GNU-only. Looking at coreutils' source
code, It just calls mkfifo.
This one line patch should fix makepkg logging in non-GNU systems.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents circular symlinks and weird final package locations
when using commands like 'PKGDEST="." makepkg'.
Fixes FS#20922.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Compare paths using bash's "-ef" rather than by string tests as this
takes symlinks into account. This will prevent issues similar to those
in FS#20922 if (e.g.) $PKGDEST is a symlink to $startdir.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The checking of the package for $srcdir references was overly
sensitive and gave a lot of what appear to be false positives with
binary files (in particular with debugging symbols kept).
Restrict the search for $srcdir to non-binary files as this should
still catch the majority of configuration issues the check was
initially designed to catch. Also, add a similar check for $pkgdir.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
For binary packages, the majority of the time used in the debugs symbol
stripping process is the actual stripping of the binaries/libraries and
not the testing of which files to strip. This allows more complete
stripping of packages that install to "non-standard" paths that would
not be generally included in makepkg.conf.
Any performance hit that may be apparent for (_large_) "arch=('any')"
packages can readily be avoided by disabling stripping in the PKGBUILD
options array.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
After a8dcfeccfc, Allan noted that one more regular exprssion inside makepkg
also contained quotes; these should not be there for the same reason as that
commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
A pipe between tar and compression command is used. This improves
performance by running tar and the compression command simultaneously.
Using a pipe also reduces IO by not writing an intermediate tar file
to disk.
Signed-off-by: Juergen Hoetzel <juergen@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Regular expressions in bash should not be quoted. Glad this was in the
documentation and I didn't have to go to #bash to ask...
Signed-off-by: Dan McGee <dan@archlinux.org>
If optdepends was defined with empty members, then makepkg would
abort late in the package building process. Detect such cases
in the check_sanity() function.
Fix-provided-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead of declaring a new local variable for each loop in the
check_sanity() function, just reuse $i.
Signed-off-by: Allan McRae <allan@archlinux.org>
It is unnecessary to check for a variables existence before
looping over it.
Extracted from patch supplied by Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
"Invalid backup entry" was not a particular helpful error message,
especially when it was due to the file not being in the final package.
Clarify these two messages.
Signed-off-by: Allan McRae <allan@archlinux.org>
Combine changelog and install file creation in create_package().
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Eases maintanence if we need to add further options in the future.
Extracted from a patch supplied by Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Prevent makepkg aborting whe colors are enabled and the terminal
does not support setting colors by tput.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When performing local testing, it may be useful to add PKGEXT='.pkg.tar'
to the PKGBUILD to save time, especially with big packages.
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes repackaging issues when multiple package names are passed to the
--pkg option.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Variables that are only meaningful within the function they are declared in are
now prefixed by "local".
Signed-off-by: Andres P <aepd87@gmail.com>
[Allan: fix whitespace]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes two issues:
1) using "sudo -l" results in excess password asking under certian
configurations. Revert to the pre 3.4 behaviour of always using
sudo if it is installed.
2) Properly escape the command so that that versioned dependencies,
such as "foo>4", do not get treated as output redirection when using
su. This also unifies the generation of the pacman line and its
privilege escalation.
Based on patches supplied by Andres P <aepd87@gmail.com> with minor
adjustments for suitability for the maint branch.
Original-work-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
When makepkg catches a command failure it currently prints "Aborting..."
and exits. Clarify the reason for aborting from packaging is a failure
during one of the PKGBUILDs functions.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Attempt to find "du" from coreutils in the standard paths and if
not revert to the version in the users PATH. Using the full path
prevents issues such as FS#19932, where a different and incompatible
version of du is put earlier in the users path.
Signed-off-by: Allan McRae <allan@archlinux.org>
The 'grep -R' in the $srcdir check would not only grep regular files,
but also devices, symlinks (that might potentially point outside of
$pkgdir), pipes and so on. Use find to ensure only regular files are
examined.
This should fix https://bugs.archlinux.org/task/19975
Signed-off-by: Allan McRae <allan@archlinux.org>
Commit 13748ca052 inversed the nature of one test wherein the if clause would
throw a fatal error if a legitimate package function was defined in PKGBUILD.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Running "pacman -T foo" is expected to return a non-zero value when
"foo" is not installed. This sets of the error trap in bash-3.2 but
not bash 4.x. Work around this by disabling the error trap around
this pacman call as we are manually checking the return value anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
Commit 3d67d9b1 introduced multiple bash4 string manipulations.
Revert those in order retain compatibility with bash-3.2 which
is still widely used.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
pacman -Qq output is sorted according to the users LC_COLLATE
setting as is needed for comm.
Signed-off-by: Andres P <aepd87@gmail.com>
[Allan: adjust commit message]
Signed-off-by: Allan McRae <allan@archlinux.org>
Ease maintainace; the two parts that have been combined into a function were
identical.
Signed-off-by: Andres P <aepd87@gmail.com>
[Allan: rename function]
Signed-off-by: Allan McRae <allan@archlinux.org>
Regression caused by c71fe7db. Was checking for "optdepend" and "conflict"
rather than "optdepends" and "conflicts" when populating .PKGINFO.
Signed-off-by: Andres P <aepd87@gmail.com>
[Allan: adjust commit message]
Signed-off-by: Allan McRae <allan@archlinux.org>
If the library stripping variables are not defined in makepkg.conf,
libraries will be fully stripped and become broken. Fallback to a
sane default stripping level.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If "file -bizL" does not return a supported type, check if the file is
recognized by bsdtar and if yes extract from it.
Dan: use '-q' option to prevent needing to seek the entire archive.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Instead of specifying the output file on every echo, leave it to the
caller of write_pkginfo to specify the target.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Change all instances of the (test) [ builtin to the [[ keyword.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Rely on type -p's return value instead of a string check.
And gettext was previously being checked with type -t, which was
inconsistent with the rest of the tests pertaining commands that aren't
expected to be functions nor builtins.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
If the library stripping variables are not defined in makepkg.conf,
libraries will be fully stripped and become broken. Fallback to a
sane default stripping level.
Signed-off-by: Allan McRae <allan@archlinux.org>
Source packages were getting created with only links to local source
files. Caused by commit 5cddcc90.
Also, fix dangling symlinks to install and changelog files. Caused
by commit fe1e3471.
Thanks to Christopher Rogers <slaxemulator@gmail.com> for pointing
out areas that were failing.
Signed-off-by: Allan McRae <allan@archlinux.org>
Move the absolute filename detection to a new function to reduce code
duplication.
This patch also fixes the --allsource option that did not include remote
source files if they reside in $startdir instead of $SRCDEST.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
The complete file path of a temporary symlink is really useless
information.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Dan McGee <dan@archlinux.org>
Merges code in two almost identical chunks in create_srcpackage and
check_sanity.
Also discards the space kept by regex in ae73d75660 and earlier, since
the for loop discards it later on.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The .INSTALL and .CHANGELOG files in a package retained the permissions
that they had in $startdir. Do a chmod after copying to ensure
that the permissions are sane.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
f569c4a042 wrongly relied on file's output.
The fix is to not decompress files in the first place.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Extends the use of the --skipinteg option to creating a source
package. Fixes FS#15984.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
With this patch, dependencies will be resolved and not silently ignored
when running:
makepkg --nobuild --syncdeps
makepkg --repackage --syncdeps
Also, a warning is displayed when repackaging and dependencies are not
being resolved.
Thank you Allan for the feedback.
Signed-off-by: Nezmer <git@nezmer.info>
[Allan: Only warn when repackaging with a package function]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The current --skipinteg is a bit weird. It does not skip integrity
checks, but instead does them and prints a warning. Change this
behaviour to actually skipping the checks.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The presence of all install and changelog files (multiple files may
be used with package splitting) is checked for in check_sanity().
All install and changelog files are copied to the source location
when using --source. The check for install and changelog file presence
is removed in create_srcpackage() as this is redundant to the checks
performed in check_sanity().
Moved install and changelog handling in create_srcpackage() to after
source array files, as this is more logical and readily allows for the
following.
A check is made when creating a source package that a symlink to an
install file has not already been added. This can occur if the
install file is used multiple times or if it is listed in the source
array.
Fixes FS#18831, FS#18394 and partially fixes FS#16004
Signed-off-by: Allan McRae <allan@archlinux.org>
Compare a list of packages on the system before and after dependency
resolution in order to get a complete list of packages to remove. This
allows makepkg to remove packages installed due to provides.
Bail in cases where packages that were on the system originally have been
removed as there is a risk of breaking the system when removing the new
packages.
Fixes FS#15144.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
File permissions are not guaranteed to stay the same on exit from fakeroot,
so repackaging may result in files with different permissions. This is
avoided when using a package() function (or split packages) as the
packaging step is rerun.
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: touched up message for translation purposes]
Signed-off-by: Dan McGee <dan@archlinux.org>
When a man page has both symbolic and hard links, any symlink pointing
to other than the alphabetically first hardlink was not "compressed"
and left dangling towards the uncompressed man page. Fixes FS#18569.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The newly added variables STRIP_BINARIES, STRIP_SHARED and STRIP_STATIC,
that are set in makepkg.conf, specify the strip options used on binaries
and shared and static libraries.
In addition, files are now stripped more aggressively by default.
Implements FS#13592 the way it was suggested by Allan in the comments.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
It was noted in FS#17533 that setgid bits are carried down into any created
subdirectories, and thus could end up being in a built package if the
original package directory was marked g+s. When we create src/ and pkg/,
explicitly chmod them to remove any sticky bits.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
When PKGDEST pointed to a non-writable location, makepkg would fail
after completing the build process. This patch makes it abort as
soon as PKGDEST is parsed.
Also, move the SRCDEST check to the same point rather than right
before downloading sources (which was after dependency checks).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Introduce $SRCPKGDEST to define a destination dir for source packages
instead of saving them in $PKGDEST with binary packages.
The simple patch doesn't break old behavior.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
When makepkg exits in create_srcpackage(), the (temporary) srclinks
directory is left behind.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently, "makepkg -R" creates a package with a wrong updated $pkgver.
Signed-off-by: Nezmer <Nezmer@allurelinux.org>
[Allan: adjusted comment]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is particularly useful when using pacman wrappers which call sudo
by themselves and therefore should not be run as root.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If PACMAN environment variable is set, makepkg will try to use this
command to check for installed dependencies and to install or remove
packages. Otherwise, makepkg will fall back to pacman.
Implements FS#13028.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: move envvar section in manpage]
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a check that the package does not contain references to the
folder it was built in.
Fixes FS#14751
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows makepkg to only build a specified subset of packages
from a split PKGBUILD. This is very useful in combination with the
-R flag or when bumping the pkgrel of a single package.
Fixes FS#15956.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When PKGDEST is used, symlinks to the packages will be put in the build
directory. This combines the convenience of a global package cache with
the ease of having a package (i.e. a symlink) in the build directory for
testing and installation purpose.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
[Allan: add comment documenting clean-up addition]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
For some packages, generally the 'any' arch ones, a build step is not
required and therefore can be skipped. In these cases, a package()
function without a build() one is sufficient.
As a side effect, this commit makes meta packages without any function
at all in the PKGBUILD possible.
Fixes FS#15147.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Since commit fb97d32, which brought in this test, support for split
PKGBUILDs was added, and therefore, all values of pkgname and also
pkgbase have to be checked now.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
makepkg looks for a package() function when building a single package
but package_$pkgname() style package functions when building a split
package. This patch allows the use of a package_$pkgname() function
when building a single package for consistency. This is achieved by
having makepkg consider a non-split package with a package_$pkgname()
function as a split package (creating just the one package).
Fixes FS#16622.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
* FS#16623, second half of makepkg
* Includes stuff like -o to ||, -a to &&, etc.
* if [ $(type ... preserved due to a bash bug with [[ and set -e and ERR traps
Signed-off-by: Isaac Good <pacman@isaac.otherinbox.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* FS#16623, first half of makepkg
* Includes stuff like -o to ||, -a to &&, etc.
* if [ $(type ... preserved due to a bash bug with [[ and set -e and ERR traps
Signed-off-by: Isaac Good <pacman@isaac.otherinbox.com>
[Dan: made commit message useful]
Signed-off-by: Dan McGee <dan@archlinux.org>
The source command triggers / might trigger the ERR trap which makes
makepkg abort right after a successful installation of missing
dependencies.
Thanks to Xavier Chantry <shiningxc@gmail.com> for finding this
solution.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#16871 and makes the pkgdesc workaround obsolete.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently makepkg takes the commandline arguments, assigns them to a
variable and passes that variable to the next makepkg call (within
fakeroot).
Use a comination of quotes and arrays in this process to ensure any
arguments passed within quotes and containing spaces stay as a single
argument during the second makepkg call.
Thanks to Dan for figuring out how to get this working.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
In doing so, it is possible to get rid of all the tests for colored
messages except for one global one.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
pkgbase is used in the following rm calls, and since pkgname can be
present when pkgbase is not, it is safer to check for pkgbase.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit c7e4d10d introduced a small error in the testing of whether
a package is already built.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows building a mixture of binary and arch=any packages.
Fixes FS#15955.
The value of CARCH is no longer overridden to "any" in when arch=any
is used and the assigning of the "any" arch is delayed to during the
packaging stage. Adjustments were required to fix installing and
checking for pre-built packages of varing arches.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixing a single package within a split package requires the overriding
or pkgrel. In very rare (but existing) cases, it is useful to
override pkgver. Partial fix for FS#15955.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This also removes the awk dependency from makepkg and repo-add.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently, a changelog is added to a package if a specific file with a
hardcoded name exists in the PKGBUILD's directory. This approach is not
pretty and also inconsistent with the handling of install files, but it
works.
With the introduction of split PKGBUILDs, however, a drawback in this
old behavior has arisen: you only have the possibility to include one
specific changelog file in either every package defined in the PKGBUILD
or in none.
The use of an additional variable, `changelog`, works around this issue
and makes it possible to include a changelog in only some of the
packages, and besides, each package of the PKGBUILD can have its own
changelog file.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Various tidying to the usage output
- change "--config <config>" to "--config <file>" to prevent wrapping in a 80 character wide terminal
- re-alphabetise options, including moving all long only opts to the end
- use same indentation for additional pacman options
- remove useless comment
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add more untranslated strings, improve consistency, etc.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
only allow optdepends like:
pkgname: description
some (real) examples of invalid optdepends:
'tcl, python and/or ruby: to use corresponding binding'
'xorg-fonts-75dpi : X bitmap fonts needed for the interface'
'ruby-htmlentities (AUR): for one provider named Deastore'
'xpdf - for pdf'
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Allan: rebase off de39a1f6 and adjust man page]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This implements FS#13551
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
These two functions were very similar.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Set the ERR trap to abort upon encountering an error during the execution
of a build or package function.
Activate set -E, which lets functions inherit the ERR trap.
Signed-off-by: Henning Garus <henning.garus@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Make bunzip2/xz/gunzip decompressing to stdout, because gzip does not offer
something like a -k option.
The selection of the decompression command for gzip/bzip2/xz compressed
files now also depends on the file suffix, since we need to strip the
extensions to get the output filename.
Thanks to Cedric Staniewski <cedric@gmx.ca> for reporting this issue and
contributing patches.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Implements FS#15830
This option allows to build a PKGBUILD with no checksums
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
All other "dep" functions (check_deps, resolve_deps, remove_deps)
have underscores separating words.
Being consistent, convert handledeps to handle_deps.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 01f9ae63 moved that creation of the PKGINFO file to before changing
to pkgdir. This causes issues when using the -R option (FS#15851).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Commandline arguments starting with a hyphen are usually recognized as
options by unix tools. Therefore, allowing hyphens at the beginning of a
package name requires a different handling of pkgnames as suggested by
rm's manpage.
It would be possible to make the scripts 'hyphen-safe', but
hyphen-prefixed packages will cause trouble for pacman users which do
not know these tricks.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
[Dan: remove the repo-add check]
Signed-off-by: Dan McGee <dan@archlinux.org>
As reported in FS#15210, we have some problems with split packages and
variable overrides because of this patch. For now, in prep for a release, it
is best to back it out and see what we can do later.
This reverts commit 621aa26e26.
Signed-off-by: Dan McGee <dan@archlinux.org>
With split packages, the pkgbase variable provides a useful way to
find out which packages were build from the same PKGBUILD. Add it
to the packages .PKGINFO file and the repo database only when
package splitting is used.
Original-patch-by: Pierre Schmitz <pierre@archlinux.de>
[Allan: restrict to including only with spilt packages
and include after pkgname]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
FS#15448 (which is made worse by the "fix" for FS#14727...), highlighted
some deficiencies in the usage of the BUILDSCRIPT variable. In particular,
only relative paths worked with "-p" and some output was very strange in
combination with the "-p" flag or reading from /dev/stdin. e.g.
"Please add a license line to your /dev/stdin!".
This patch adds a new variable, BUILDFILE, which contains the full path
to the BUILDSCRIPT. This defaults to $startdir/$BUILDSCRIPT.
Also, fix a missed quoting of $BUILD{SCRIPT->FILE} and remove warning
about missing BUILDSCRIPT definition in makepkg.conf as the default
BUILDSCRIPT value is now specified during configure. Add check that
BUILDFILE is writable before updating VCS PKGBUILDs. When making a source
package, the BUILDSCRIPT always gets given the default name, regardless
of what it was originally called.
Signed-off-by: Allan McRae <allan@archlinux.org>
Ensure we don't pass a bare filename to printf that might contain a
lookalike '%' escape sequence. Fixes part of FS#15323.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
We currently fall apart on files with spaces in the names.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Makes sure the required package functions are present when using package
splitting. Also moves setting of pkgbase variable outside the
check_sanity function to somewhere more appropriate.
Signed-off-by: Allan McRae <allan@archlinux.org>
A pkgdesc with spaces in it would get restored to an array and thus only
the first word would be restored (FS#15210). Convert that array back to a
string.
Signed-off-by: Allan McRae <allan@archlinux.org>
Errors in build() functions were only fatal, if "--log" was enabled. Errors in
package() functions were never fatal. Piping these functions through "cat -"
triggers error trapping. This prevents the need for "|| return 1" usage in
PKGBUILDs.
Original-patch-by: Juergen Hoetzel <juergen@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Checks if some or all packages are built before overwriting/installing.
Adds some new strings for translation.
Signed-off-by: Allan McRae <allan@archlinux.org>
