Now that pm_printf() always prints to stderr, we don't need this second
function that was always used with stderr as the first argument. Thus,
this patch removes the function and makes the following sed replacement:
sed -i -e 's#pm_fprintf(stderr, #pm_printf(#g' src/pacman/*.c
Signed-off-by: Dan McGee <dan@archlinux.org>
This matches what we now do in our backend callback function- all
debug/info/warning/error/etc. messages should be on stderr. These are
all the messages with a "warning:" or other type prefix, so does not
affect general pacman output.
This should fix the output confusion noted in FS#26555.
Signed-off-by: Dan McGee <dan@archlinux.org>
The default is supposidely 30 seconds from the gpg manpage, but that
sure wasn't what I was seeing- it was somewhere closer to two minutes of
silence. Add a more reasonable 10 second timeout value which should be
good enough for any keyserver that doesn't totally stink at it's job.
Signed-off-by: Dan McGee <dan@archlinux.org>
The absolutely terrible part about this is the failure on GPGME's part
to distinguish between "key not found" and "keyserver timeout". Instead,
it returns the same silly GPG_ERR_EOF in both cases (why isn't
GPG_ERR_TIMEOUT being used?), leaving us helpless to tell them apart.
Spit out a generic enough error message that covers both cases;
unfortunately we can't provide much guidance to the user because we
aren't sure what actually happened.
Signed-off-by: Dan McGee <dan@archlinux.org>
This logic is reused in both diskspace and downloadspace check
functions, so pull it out into its own static method.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This function determines if the given cachedir has at least the given
amount of free space on it. This will be later used in the sync code to
preemptively halt downloads.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We can take a large shortcut here that saves us a lot of time,
especially when upgrading packages with lots of directories. Obviously
iterating the full file list of every single package to determine if
this directory was present in any other package can take quite some time
on a system with many packages installed. We don't need to remove a
directory at all if we are upgrading a package and the version we are
moving to still had the directory.
Also make a small optimization on the package comparsion- we really only
care about equality here, not the result of the compare, so we can
shortcut using our name_hash.
What kind of benefit does this give us? Oh, only a reduction from 295.7
million to 1.4 million strcmp() calls (99.5% fewer) during a
`pacman -S linux libreoffice-common` operation.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is not something that should be used on a frequent basis, and
giving it a short option encourages use without making the drawbacks
obvious. For the 1% of situations that require it, the 5 extra
keystrokes are a fair price to pay.
Signed-off-by: Dan McGee <dan@archlinux.org>
This replaces several printf calls of the following styles:
printf("%s", ...);
printf("some fixed string");
printf("x");
We can use either fputs() or putchar() here to do the same thing
without incurring the overhead of the printf format parser.
The biggest gain here comes when we are calling the print function in a
loop repeatedly; notably when printing local package files.
$ /usr/bin/time ./pacman-before -Ql | md5sum
0.25user 0.04system 0:00.30elapsed 98%CPU
$ /usr/bin/time ./pacman-after -Ql | md5sum
0.17user 0.06system 0:00.25elapsed 94%CPU
$ /usr/bin/time ./pacman-before -Qlq | md5sum
0.20user 0.05system 0:00.26elapsed 98%CPU
$ /usr/bin/time ./pacman-after -Qlq | md5sum
0.15user 0.05system 0:00.23elapsed 93%CPU
So '-Ql' shows a 17% improvement while '-Qlq' shows a 13% improvement on
382456 total files.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is in the realm of "probably not going to happen", but if someone
were to translate "disk" to a string longer than 256 characters, we
would have a smashed/corrupted stack due to our unchecked strcpy() call.
Rework the function to always length-check the value we copy into the
hostname buffer, and do it with memcpy rather than the more cumbersome
and unnecessary snprintf.
Finally, move the magic 256 value into a constant and pass it into the
function which is going to get inlined anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Make all docs depend on Makefile; if we change flags here we want them
rebuilt.
* Add explicit filenames to .gitignore so we can add our own CSS
override file, and add an asciidoc-override.css resource.
* Adjust a few asciidoc options when generating HTML.
* Remove asciidoc-manpage.css; apparantly this doesn't exist anymore.
Signed-off-by: Dan McGee <dan@archlinux.org>
Replace "/tmp" with "${TMPDIR:-/tmp}" to allow for overriding the
hardcoded path.
Since we only use "/tmp" in conjunction with mktemp(1), we could also
have used "--tmpdir", which is GNU-ish, however (and the BSD counterpart
"-t" has been deprecated in GNU mktemp).
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This includes some fixes to the messages that are displayed when a
signal is caught in makepkg or repo-add:
* Instead of always showing "==> ERROR: TERM signal caught. Exiting...",
replace "TERM" by whatever signal is actually caught.
* Fix a typo in the SIGERR error message in repo-add ("occurred" instead
of "occured"). Francois already fixed this for makepkg in 1e51b81c.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
There is a small chance that a user sends SIGINT (or any other signal
that is trapped) when we're already in clean_up() which used to lead to
trap_exit() being executed and the remaining code in clean_up() being
skipped due to the bash signal/trap handler blocking EXIT (since its
handler is already being executed, even if it's interrupted).
In practice, this behaviour caused unexpected results (primarily because
pressing ^C at the wrong time left a lock file behind):
$ ./repo-add extra.db.tar.gz foobar
==> Extracting database to a temporary location...
^C
==> ERROR: Aborted by user! Exiting...
$ ./repo-add extra.db.tar.gz foobar
==> Extracting database to a temporary location...
==> ERROR: File 'foobar' not found.
==> No packages modified, nothing to do.
^C
==> ERROR: Aborted by user! Exiting...
$ ./repo-add extra.db.tar.gz foobar
==> ERROR: Failed to acquire lockfile: extra.db.tar.gz.lck.
==> ERROR: Held by process 18522
Fix this and reduce the chance of race conditions in signal handlers by:
* Unhooking all traps in both clean_up() and trap_exit().
* Call clean_up() explicitly in trap_exit() to make sure we remove the
lock file and the temporary directory even if we send SIGINT when
clean_up() is already being executed but didn't reach the unhook code
yet.
Also, add an optional parameter to clean_up() to allow for setting an
explicit exit code when we call clean_up() from trap_exit().
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This one is pretty darn useless. Just derefence the ->data attribute
since the type is public anyway and save yourself the function call.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will be useful when extending disk space checks to free space
checking before we download package files.
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead of iterating character by character, use memchr() calls to
hopefully speed up the search. A newline is the most likely culprit, so
search for that first followed by a NULL byte if there was no newline in
the buffer.
Signed-off-by: Dan McGee <dan@archlinux.org>
In the default configuration, we can enter the signing code but still
have nothing to do with GPGME- for example, if database signatures are
optional but none are present. Delay initialization of GPGME until we
know there is a signature file present or we were passed base64-encoded
data.
This also makes debugging with valgrind a lot easier as you don't have
to deal with all the GPGME error noise because their code leaks like a
sieve.
Signed-off-by: Dan McGee <dan@archlinux.org>
This had the unfortunate implementation detail that depended on the
strings having 1 byte == 1 column hold true. As we know, this is not at
all the case once you move past the base ASCII character set.
Reimplement this whole thing so it doesn't depend on format strings at
all. Instead, simply calculate the max column widths, and then when
displaying each row add the correct amount of padding using UTF-8 safe
string length functions.
Before:
名字 旧版本新版本 净变化 下载大小
libgee 0.6.2.1-1 0.60 MiB 0.10 MiB
libsocialweb 0.25.19-2 1.92 MiB 0.23 MiB
folks 0.6.3.2-1 1.38 MiB 0.25 MiB
After:
名字 旧版本 新版本 净变化 下载大小
libgee 0.6.2.1-1 0.60 MiB 0.10 MiB
libsocialweb 0.25.19-2 1.92 MiB 0.23 MiB
folks 0.6.3.2-1 1.38 MiB 0.25 MiB
Signed-off-by: Dan McGee <dan@archlinux.org>
If you need zero-filled allocations, call CALLOC() instead.
This was from the original definition of these macros in commit
cc754bc6e3be0f3; hopefully our code is in the shape it needs to be to
switch this behavior.
Signed-off-by: Dan McGee <dan@archlinux.org>
These backup-related paths in package extraction are used on relatively
few files during the install process, so bump them off the stack and
into the heap. This removes the artificial PATH_MAX limitation on their
length as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will always be a 64-bit signed integer rather than the variable length
time_t type. Dates beyond 2038 should be fully supported in the library; the
frontend still lags behind because 32-bit platforms provide no localtime64()
or equivalent function to convert from an epoch value to a broken down time
structure.
Signed-off-by: Dan McGee <dan@archlinux.org>
This prepares the function to handle values past year 2038. The return type
is still limited to 32-bits on 32-bit systems; this will be adjusted in a
future patch.
Signed-off-by: Dan McGee <dan@archlinux.org>
We have a few incomplete translations, but these should be addressable
before the 4.0.1 maint release that is surely not that far in the
future.
Signed-off-by: Dan McGee <dan@archlinux.org>
Similar to what we did in edd9ed6a, disconnect the relationship with our
stack allocated error buffer from the curl handle. Just as an FTP
connection might have some network chatter on teardown causing the
progress callback to be triggered, we might also hit an error condition
that causes curl to write to our (now out of scope) error buffer.
I'm unable to reproduce FS#26327, but I have a suspicion that this
should fix it.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Our error message used to be very unclear when the configuration file
could not be found:
$ ./pactree -lsr gtk
error: failed to register sync DBs
Instead, display an accurate message and include the file name:
$ ./pactree -lsr gtk
error: config file /usr/local/etc/pacman.conf could not be read
Also, move the error message inside register_syncs() to allow for
differentiating between different errors that might require a handler in
the future.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
