Provide support for specifying LDFLAGS within makepkg.conf but leaves
this undefined by default. Fixes FS#12542.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The purge option, combined with the PURGE_TARGETS variable,
allows makepkg to automatically remove commonly confliting or
removed files (e.g. /usr/share/info/dir, *.pod).
Original work: Tim Yang
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Provides a MAN_DIRS variable in makepkg.conf which can be used
to specify folders to look for manual (man and info) pages to be
compressed. Useful for packages that install to /opt. Also
clarifies that "zipman" means "zip manuals" and covers both man
and info pages.
Original work by: Tiago Pierezan Camargo <tcamargo at gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
As reported here, man pages could no longer be built :
http://archlinux.org/pipermail/pacman-dev/2008-December/007726.html
I found the explanation here :
http://www.methods.co.nz/asciidoc/source-highlight-filter.html
"If you use a2x(1) to generate PDF you need to include the --no-xmllint
option to suppress xmllint(1) checking — the programlisting language
attribute (required by the dblatex source highlighter) is not part of the
DocBook 4 specification (but it is in the newer DocBook 5 specification)."
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Using > or < in the provides array is wrong so make it cause an error.
Fixes FS#12540.
Also, use bash substitution rather than spawning new processes where
possible in the error checking. Move split package detection to a
better position.
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: backport to maint]
Signed-off-by: Dan McGee <dan@archlinux.org>
I mess this up more often than not, and maybe this will do the trick. Remove
the --enable-asciidoc option as it has been superseded by the --disable-doc
option in usefulness. If you want to skip building docs, you skip building
all docs which is much easier when it comes to ensuring the make 'dist' and
'distcheck' targets will always build the manpages and always build the most
up to date manpages.
Developers shouldn't be affected in their normal builds, nor should end
users of the source tarball.
Signed-off-by: Dan McGee <dan@archlinux.org>
A source entry can now have the following form, to specify a different
filename :
"filename::http://path/to/file"
Of course, the old syntax is still supported :
"http://path/to/file"
And as before, in the second case, the filename used is simply "file".
This fixes FS#11292, because handling multiple source files with the same
name is now possible (just choose a different filename).
But it will also allow to deal much more nicely with funny url like this by
using a sane filename (and unfortunately, there are quite a few) :
http://www.vim.org/scripts/download_script.php?src_id=6992
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
After commit 7865fb9af4, info pages are now treated like man pages.
This means even with !docs, info pages will still be included. And including
info pages was the main reason the docs option was enabled by default
recently. So this is now longer needed, and we can revert back to !docs by
default for disabling gigantic html pages and other docs.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
DB_COMPRESSION was only used in repo-add and DB_CHECKSUMS was not used
anywhere.
This also removes the dependency on makepkg.conf in repo-add, so repo-add no
longer needs to source makepkg.conf
And instead of DB_COMPRESSION, it seems better to just check the extension
of the repository file. It does not make sense to have a tar.gz file with a
tar.bz2 extension or whatever.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
As far a package building is concerned, info pages need to be treated
in the same fashion as man pages in that they both can be compressed.
This separates them from other forms of documentation and so it makes
sense to make that distinction within makepkg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Change the return values to be more informative.
It was previously boolean, only indicating if a sync package was newer than
a local package.
Now it is a simple wrapper to vercmp, handling the force flag.
* Remove the verbose output from _alpm_pkg_compare_versions.
The "force" message is not so useful.
The "package : local (v1) is newer than repo (v2)" message can be moved to
-Su operation.
For the -S operation, it is better to have something like :
"downgrading package from v1 to v2"
* Don't display the "up to date -- skipping" and "up to date -- reinstalling"
messages, when the local version is newer than the sync one.
* Fix the behavior of --needed option to not skip a target when the local
version is newer, and clarify its description.
* Add a new alpm_pkg_has_force function
This allows us to access the pkg->force field like any other package fields.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
By doing the bolding manually, it doesn't look as cool in the HTML generated
manpages. Let asciidoc do the work.
Signed-off-by: Dan McGee <dan@archlinux.org>
This vercmp issue has been a sticking point but this should resolve many of
the issues that have come up. Only a few minor code changes were necessary
to get the behavior we desired, and this version appears to beat any other
vercmp rendition on a few more cases added in this commit.
This commit passes all 58 vercmp tests currently out there. Other 'fixes'
still fail on a few tests, namely these ones:
test: ver1: 1.5.a ver2: 1.5 ret: -1 expected: 1
==> FAILURE
test: ver1: 1.5 ver2: 1.5.a ret: 1 expected: -1
==> FAILURE
test: ver1: 1.5-1 ver2: 1.5.b ret: 1 expected: -1
==> FAILURE
test: ver1: 1.5.b ver2: 1.5-1 ret: -1 expected: 1
==> FAILURE
4 of 58 tests failed
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch introduces a new STRIP_DIRS makepkg.conf option
to change makepkg's search path when stripping binaries.
Original work by: Thomas Bächler <thomas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Now '-S provision' handling is done in the back-end.
In case of multiple providers, the first one is selected (behavior change:
deleted provision002.py). The old processing order was: literal, group,
provision; the new one: literal, provision, group. This is more rational,
but "pacman -S group" will be slower now. "pacman -S repo/provision" also
works. Provision was generalized to dependencies, so you can resolve deps by
hand: "pacman -S 'bash>2.0'" or "pacman -S 'core/bash>2.0'" etc. This can be
useful in makepkg dependency resolving. The changes were documented in
pacman manual.
alpm_find_pkg_satisfiers and _alpm_find_dep_satisfiers functions were
removed, since they are no longer needed.
I added some verbosity to "select provider instead of literal" and
"fallback to group".
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add documentation for $startdir, $srcdir, and $pkgdir variables, as well as
general information about the build() function and about custom variables
in PKGBUILDs. This addresses FS#10634.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch offers a way to fix FS#9228.
By putting "SyncFirst = pacman" in pacman.conf, the version check will
happen before the transaction really starts, and before any replacements is
made.
Otherwise, no version check is done.
The sync301 pactest was updated to use this SyncFirst option.
Example session with SyncFirst = pacman, and a newer pacman version
available :
$ pacman -Su (or pacman -S <any targets>)
:: the following packages should be upgraded first :
pacman
:: Do you want to cancel the current operation
:: and upgrade these packages now? [Y/n]
resolving dependencies...
looking for inter-conflicts...
Targets: pacman-x.y.z-t
Total Download Size: x.xx MB
Total Installed Size: x.xx MB
Proceed with installation? [Y/n] n
As Nagy previously noted, doing this check on any -S operations might look
intrusive, but it can be required.
For example, the case where you want to install a package with versioned
provisions, using a pacman version which didn't support that feature yet
(and there is already a newer pacman in sync db supporting it).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
They are pretty noisy scripts in their normal course of operations, so allow
all messages to be squashed except for warning and error messages with this
new flag.
Signed-off-by: Dan McGee <dan@archlinux.org>
From http://www.stack.nl/~dimitri/doxygen/config.html#cfg_javadoc_autobrief
JAVADOC_AUTOBRIEF
If the JAVADOC_AUTOBRIEF is set to YES then doxygen will interpret the
first line (until the first dot) of a JavaDoc-style comment as the brief
description. If set to NO (the default), the Javadoc-style will behave just
like regular Qt-style comments (thus requiring an explicit @brief command
for a brief description.)
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
As it was already mentioned several times, the new -Sc behavior in 3.1 is
great, but only when the package cache is not shared.
This option has two possible values : KeepInstalled and KeepCurrent
With KeepCurrent, -Sc will clean packages that are no longer available in
any sync db, rather than packages that are no longer in the local db. The
resulting behavior should be better for shared cache.
Ref :
http://www.archlinux.org/pipermail/pacman-dev/2008-February/011140.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
These case insensitive comparisons didn't work in some locales, like tr_TR
where upper(i) != I. So a second case sensitive comparison had to be made
for each directive.
Only keeping case sensitive comparisons make the code cleaner and treat all
locales equally.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011445.html
Also fix pactests to use the correct case.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
All other steps in tidy_install function were already controlled by an
option in makepkg.conf, so this patch adds an option for the man page
compression step too.
This will allow to keep man pages uncompressed, which is required for some
special meta man page, like the zshall one (see FS#4580).
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011472.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
* -Rss removes all dependencies (including explicitly installed ones).
* updated documentation
* two pactest files added to test the difference between -Rs and -Rss
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Download to *.part and remove the suffix if successful, thus md5sums will be
checked only for complete files, and next time makepkg will resume
downloading of partial file instead of complaining about invalid md5sums.
Old DLAGENTS format is still supported.
Late fix: Do not try to download %u first
The output of grep was not suppressed, thus the output of get_downloadcmd
was wrong because of extra line at the beginning that contained an
unsubstituted (with %o and %u) entry from DLAGENTS.
Signed-off-by: Roman Kyrylych <roman@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
With --unneeded option 'pacman -R' doesn't stop in case of dependency error;
it removes the needed-dependency targets from the target-list instead. See
also: http://archlinux.org/pipermail/pacman-dev/2007-October/009653.html .
The patch also adds a new causingpkg field to pmdepmissing_t which indicates
the to-be-removed package which would cause a dependency break. This is
needed, because miss->depend.name may be a provision. miss->causingpkg will
be useful in -R dependency error messages too.
[Xavier: renamed inducer to causingpkg, removed the _alpm_pkgname_pkg_cmp
helper function as requested by Aaron. This might be added by a further
commit. Other small cleanups, updated manpage and bash completion.]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
The force option should only be specified in the PKGBUILD with
options=(force). This information should be handled like any other meta
info, and there is no need to have a special repo-add option for it.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: fix up a few more references in contrib/ scripts, etc]
Signed-off-by: Dan McGee <dan@archlinux.org>
