This is partial revert of 8454daa7fe (makepkg: run pkgver() and
prepare() with --noextract).
Reasoning for the reversion (copied from FS#43498):
Running prepare() when --noextract is used no longer allows running
'makepkg -o && makepkg -e' with any PKGBUILD that applies patches in
prepare(). [1]
Sure there's --noprepare which restores the old behavior, but that's
a lot of extra typing for what I believe is a much more common use
of --noextract.
For OP's use case of doing git bisects, you can specify the commit
in the source array and thus skip --noextract since makepkg will
checkout the correct commit each time.
[1] I often extract the sources using 'makepkg -o', manually edit
some source files, and then use 'makepkg -e' to package it (while
possibly repeating the edit/package steps).
Signed-off-by: Allan McRae <allan@archlinux.org>
Modifications made to the source before running with --noextract may alter
the version string returned by pkgver(). Always run this function if present
and check build status before proceeding. Fixes FS#46800.
Also run prepare() when --noextract is used (unless --noprepare is specified).
Signed-off-by: Allan McRae <allan@archlinux.org>
At some point back in 2009, logging was expanded to cover all of the packaging
functions, but the man page was not updated to reflect that. Fix that!
Signed-off-by: Alastair Hughes <hobbitalastair@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This commit adds a makepkg option to generate and print the SRCINFO file
for a PKGBUILD, required by the new AUR, to stdout.
AUR 4.0 will use Git instead of source tarballs for uploading packages,
so making makepkg capable of printing the SRCINFO would simplify package
management, instead of having to extract it from a source tarball.
It is also useful for scripting other things, so that instead of having
to parse PKGBUILDs, one can make makepkg generate the SRCINFO and then
you can parse that instead, which is much simpler and less error-prone.
Signed-off-by: Allan McRae <allan@archlinux.org>
makepkg --packagelist prints the name of each package that would
normally be produced, minus $PKGEXT, and exits.
Implements FS#42150
Signed-off-by: Ivy Foster <joyfulgirl@archlinux.us>
Signed-off-by: Allan McRae <allan@archlinux.org>
Remove blank lines immediately following section headings.
Ensure two blank lines before the start of a new section.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
Dependencies are now handled with --nobuild unless specificially skipped.
Using --verifysource will skip dependency checks unless --syncdeps is
specified.
Fixes FS#35057 and FS#36999.
Signed-off-by: Allan McRae <allan@archlinux.org>
We expect all source file to lie in $startdir. However, using
"makepkg -p <buildscript>" can currently allows people to specify buildscripts
in other directories. This results in confusion about where other sources
should lie (in startdir or in the directory that the buildscript is in).
Explicitly disable using -p for files in other directories to avoid this issue.
Fixes FS#40293.
Signed-off-by: Allan McRae <allan@archlinux.org>
The days of fakeroot being error ridden are long gone, so there is no
valid reason to run makepkg as root.
Signed-off-by: Allan McRae <allan@archlinux.org>
1. Packagers who want to test the package() function, i.e. to check the content
of the pkg/ folder.
2. Developers who want to check how the packaged version of a program looks, in
other words how the pkg/ folder looks.
3. For users of systems with no port tree, makepkg can ease package creation.
However the resulting archive of the whole makepkg process is often useless.
For all situations, makepkg will usually be called several times. But no archive
(the final package) is needed in any cases. The archive creation ends up being a
waste of time and resource, especially for big applications and slow machines.
Since this option aborts the process prematurely, it behaves like the
-o,--nobuild option, i.e. any other option acting on later stages in the process
will be automatically discarded. For --noarchive, it means that in
$ makepkg --noarchive --install
the '--install' option does not do anything.
Signed-off-by: Pierre Neidhardt <ambrevar@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Looks like I fat fingered something when I refactored the original
submissions. Woops.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This allows for VAR=value and VAR+=value variable declarations.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Add support for overriding configuration in /etc/makepkg.conf and
~/.makepkg.conf by setting the environment variable CARCH similar to
how SRCDEST and PKGDEST behave.
Fixes FS#35030.
Signed-off-by: Allan McRae <allan@archlinux.org>
This new option disables the prepare function. Useful in combination
with -o to get an unpatched copy of the sources for testing purpose.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Because --noextract also implies to not download/verify source files, it wasn't
possible to simply do that, without either extracting and/or building.
(Note: --verifysource takes precedence over --noextract)
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Simply add the option to pass the --needed flag to pacman when using -i
with makepkg. When using makepkg in scripts, particularly for git
packages with the new version functions and not just a date, this can
save disk io and time instead of reinstalling.
This would mostly be useful with the --noconfirm option.
Signed-off-by: wgiokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The current VCS packaging support is really, really, really bad.
It is best to strip it out completely before rewriting it.
Signed-off-by: Allan McRae <allan@archlinux.org>
add the asdeps flag for makepkg so that it does pacman -U --asdeps
[Allan: clean-up whitespace]
Signed-off-by: Daniel Wallace <daniel.wallace12@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add support for overriding configuration in /etc/makepkg.conf and
~/.makepkg.conf by setting the environment variable PACKAGER similar to
how SRCDEST and PKGDEST behave.
Signed-off-by: Allan McRae <allan@archlinux.org>
makepkg --source is a often used go make source package like for AUR.
Have a -S shortcut will save the world.
Signed-off-by: Sebastien Luttringer <seblu@seblu.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
This gets us close to using the same modeline in all files we run
through Asciidoc, as well as adding the spell and spelllang
declarations, just as we had in NEWS already.
The choice of 'en_us' is mainly for consistency and because the body of
work already uses these spellings.
Signed-off-by: Dan McGee <dan@archlinux.org>
Allows the skipping of all integrity checks (checksum and PGP) or
either the checksum or PGP checks individually.
Original-patch-by: Wieland Hoffman <theminew@googlemail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Many projects provide signature files along with the source code
archives. It's good to check these, too, when verifying the integrity
of source code archives.
Not everybody is using gpg so the verification can be disabled with
--skippgpcheck.
Additionally, only a warning is displayed when the key that signed the
source file is unknown.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a fairly useless feature given all it does is an "rm" on a
directory. It is also unlikely that you would want to remove the
entire SRCDEST anyway, but rather just the old files.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a BUILDDIR variable (which can be overridden in the environment)
to specify an alternative location for building the package. This is
useful for people who want to build on a different filesystem for
improved performance (e.g. tmpfs).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When I switched all paths to use `` formatting, I didn't realize
substitution didn't work in these quote marks. Use ++ instead to ensure
attributes are substituted where appropriate.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add the "GPGKEY" option to makepkg.conf for specifying signing packages
with the non-default key from the keyring. Is overridded by makepkg's
--key option.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
