These case insensitive comparisons didn't work in some locales, like tr_TR
where upper(i) != I. So a second case sensitive comparison had to be made
for each directive.
Only keeping case sensitive comparisons make the code cleaner and treat all
locales equally.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011445.html
Also fix pactests to use the correct case.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
All other steps in tidy_install function were already controlled by an
option in makepkg.conf, so this patch adds an option for the man page
compression step too.
This will allow to keep man pages uncompressed, which is required for some
special meta man page, like the zshall one (see FS#4580).
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011472.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
* -Rss removes all dependencies (including explicitly installed ones).
* updated documentation
* two pactest files added to test the difference between -Rs and -Rss
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Download to *.part and remove the suffix if successful, thus md5sums will be
checked only for complete files, and next time makepkg will resume
downloading of partial file instead of complaining about invalid md5sums.
Old DLAGENTS format is still supported.
Late fix: Do not try to download %u first
The output of grep was not suppressed, thus the output of get_downloadcmd
was wrong because of extra line at the beginning that contained an
unsubstituted (with %o and %u) entry from DLAGENTS.
Signed-off-by: Roman Kyrylych <roman@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
With --unneeded option 'pacman -R' doesn't stop in case of dependency error;
it removes the needed-dependency targets from the target-list instead. See
also: http://archlinux.org/pipermail/pacman-dev/2007-October/009653.html .
The patch also adds a new causingpkg field to pmdepmissing_t which indicates
the to-be-removed package which would cause a dependency break. This is
needed, because miss->depend.name may be a provision. miss->causingpkg will
be useful in -R dependency error messages too.
[Xavier: renamed inducer to causingpkg, removed the _alpm_pkgname_pkg_cmp
helper function as requested by Aaron. This might be added by a further
commit. Other small cleanups, updated manpage and bash completion.]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
The force option should only be specified in the PKGBUILD with
options=(force). This information should be handled like any other meta
info, and there is no need to have a special repo-add option for it.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: fix up a few more references in contrib/ scripts, etc]
Signed-off-by: Dan McGee <dan@archlinux.org>
Looks like no one ever documented -L/--log, so do that now. In addition,
address some of the issues brought up in FS#9156 and add a note about build
output and logs being in the current locale.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the symmetric of --asdeps, install packages explicitly.
Documentation and completion files were updated accordingly.
Added sync301.py and upgrade032.py pactest files to test this.
I also made a little modification in ALLDEPS handling too.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
s/old packages/packages that are no longer installed/g.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Change the 'provname provver' format to 'provname=provver'.
In .PKGINFO, the provisions are copied from the PKGBUILD without quotes. So
the provision version was actually handled as a different provision...
See FS#9171.
Dan: Unfortunately we have to change our original specification for
versioned provisions with this patch, but it ends up being the simpler and
cleaner solution in the long run, and if there is any time to change it the
time is now before many packages have been built. Keeping the ' ' based
format would have required us to do special parsing in repo-add, as well as
being susceptible to users not using quotes in their provides array.
Hopefully this will resolve the issues we had with our initial plan. Sorry
for the confusion.
Acked-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses some of the issues in FS#9192. Attempt to clarify the -Rc
and -Rs options in the man page.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add documentation for --holdver (from Scott) and --forcever (saying this
is an internal option that should not be used by most end users), and
re-alphabetize the --asroot option.
Signed-off-by: Dan McGee <dan@archlinux.org>
It turns out the orphan name was misleading. Real orphans are packages
installed as dependency no longer required by any others (-Qtd).
The -t option only shows package not required by any others, so --unrequired
describes it better.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Document the following:
* -R can take a group
* -S can take a group and provision
I also split up the -S description into multiple paragraphs because it
was getting too large.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
[Dan: added some feedback from the ML, rewrapped lines]
Signed-off-by: Dan McGee <dan@archlinux.org>
Update description of path specifiers for both pacman and pacman.conf in
their respective manpages. Ensure it is obvious that they are absolute and
not relative paths.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is an Arch-specific tool (although others could find use in it), so
off to the standalone ABS package it goes.
Signed-off-by: Dan McGee <dan@archlinux.org>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case manlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 012f793978 was a bit misguided in its
thinking, and resulted in a package built without asciidoc enabled not
installing the manpages to the system on a 'make install' operation. Fix
this behavior by making manpages required in a normal build, and in order to
disable their existence, the '--disable-doc' option must be used.
Hopefully this solves manpage issues for both developers and package
builders while allowing as much flexibility as possible.
Signed-off-by: Dan McGee <dan@archlinux.org>
Make the manpage a little more distro agnostic by referring to ABS in the
context of Arch Linux, and saying that prototype files are also available
with the pacman source.
Signed-off-by: Dan McGee <dan@archlinux.org>
During a pacman operation such as a group install, pacman can ask several
questions such as "local version is up to date. Upgrade anyway?". They are
usually all answered either by yes or by no:
* yes when you want to reinstall all the targets.
* no when you only want to install the missing ones (either because you are
installing a group, or because you are copying a pacman -S line from wiki or
whatever).
So instead of asking this question for each target, it is now now configured
with a flag. Yes will be the default -S behavior, No will be achieved with
the --needed flag.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This operation made sense in the days before sync DBs existed, but it no
longer has the same usefulness it once did.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Note that if you are building manpages with asciidoc now, you must also
have source-highlight installed for it to correctly generate everything.
Signed-off-by: Dan McGee <dan@archlinux.org>
As the b96922679e commit showed with two
pactests (which were renamed to depconflict110/111), versioned conflicts are
now possible.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch introduces versioned provisions in "provision 1.0-1" format.
_alpm_db_whatprovides was modified accordingly (added sync500.py),
alpm_depcmp was modified accordingly (add043.py passes now; added add044.py
and add045.py).
Notes:
alpm_db_search now uses the whole versioned %PROVIDES% string in its search.
debug logging was simplified in alpm_depcmp.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xavier: fixed a few typos, duplicate const strings with strdup before
modifying them, put some debugging back in alpm_depcmp, minor code cleanups
(var/function renaming), added a note in PKGBUILD man page.]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: made strcmp checks clearer, added a comment]
Signed-off-by: Dan McGee <dan@archlinux.org>
This makes --ignore and --ignoregroup able to accept multiple
packages/groups by separating each with a comma.
For instance: pacman -Su --ignore kernel26,udev,glibc
This was requested in the comments of FS#8054.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We really don't need it since it is just links. However, we do need to figure
out how to get our old links to show up right.
Signed-off-by: Dan McGee <dan@archlinux.org>
The lack of descriptions on some of the variables was causing issues with
documentation generation. Adding text to them fixes this.
Signed-off-by: Dan McGee <dan@archlinux.org>
The old one was old. Use something a bit more recent and a bit simpler as
well so it actually looks OK in the manpage.
Signed-off-by: Dan McGee <dan@archlinux.org>
Delta files will be used if the size is smaller than a percent
(MAX_DELTA_RATIO) of the package size.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We had way too much going on with the Doxygen manpage generation. Clean it
up quite a bit by removing directory manpages, using relative paths, not
having a manpage for every single alpm function, and ensuring internal
functions are not documented publicly.
Signed-off-by: Dan McGee <dan@archlinux.org>
I suppose -Qii could be used for other things than displaying
the list of backup files, but currently, it's the only one,
so that's how I documented it..
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
If we don't have asciidoc installed or enabled, we should still have a
successful make. However, we want to ensure 'make dist' fails without
asciidoc. This commit should ensure this.
Signed-off-by: Dan McGee <dan@archlinux.org>
This reverts commit dfc85cb5f5
and b6f3fe6957.
This DB check is already in testdb (among others).
Also testdb now uses the db path set at make time by default,
so specifying the db path is optional.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
.gitignore works recursively, so we don't need Makefile and Makefile.in
in all of the subdirectory .gitignore files.
Signed-off-by: Dan McGee <dan@archlinux.org>
Spruce up the asciidoc formatting, fix a few issues that we had. Formatting
now looks pretty good in both the manpage output and the XHTML output.
Also added some options that we have changed since 3.0, and a few wording
updates, etc.
Signed-off-by: Dan McGee <dan@archlinux.org>
Include manpages when we ship a package tarball, and allow them to be
generated by the end user if they want by using the --enable-asciidoc option
to ./configure. This will allow us to maintain manpages in an easier to modify
format while still keeping the make dependencies to a minimum.
Signed-off-by: Dan McGee <dan@archlinux.org>
We still need some work here- we should have a repo-remove manpage link
to this one, and we should not have to struggle with asciidoc formatting
to get it to work like any other multiple-command manpage works.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Fix up the target so we rebuild the manpages when we edit the corresponding
text file.
* Add vim modelines to all of the asciidoc files ensureing the right syntax
highlighting is used and we have expandtabs turned off.
* Start making a few small changes to PKGBUILD.5 to make it pretty in both
HTML and manpage format output.
* Fix the manlink macro to include the manpage section in the link.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add some asciidoc generation stuff to the doc/ Makefile.am so we can get
some manpages up and working. Add necessary stuff to gitignore, and check
in the asciidoc.conf file along with the footer for all of the manpages.
Signed-off-by: Dan McGee <dan@archlinux.org>
After adding a alpm_db_check() operation in the back end, we can call it
in the front end and present a user-friendly interface to it.
Inspired-by: VMiklos <vmiklos@frugalware.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Add vim modeline to Makefile.am and configure.ac
* Fix white space in Makefile.am and configure.ac
* Add contrib/wget-xdelta.sh to EXTRA_DIST in Makefile.am
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
Drop the --usesudo option and use it by default if running as a non-root
user. Check the usage of the --asroot option and do not allow it to be used
as a normal user. A few other small fixes, including a typo in $confdir.
Signed-off-by: Dan McGee <dan@archlinux.org>
* etc/makepkg.conf.in: Add description for xdelta.
* doc/makepkg.conf.5: Add description for xdelta.
* scripts/makepkg.in: Various clean ups.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
Also cleaned up some duplicate printf lines related to the ShowSize option.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Move all .cvsignore files to .gitignore for switch in VCS. In addition,
delete ones that were unnecessary because they only contained Makefile
and Makefile.am.
Signed-off-by: Dan McGee <dan@archlinux.org>
Giovanni Scafora <linuxmania@gmail.com>
* Many minor issues mentioned by Scott Horowitz <stonecrest@gmail.com>.
- extra 'done' text in --noprogressbar output
- missing flags in the pacman.8 manpage
- unclear text in --noconfirm help description
for and is a dependency of another package. (upgrade057)
* Removed man2html stuff from doc/Makefile.am.
* Patch: improved depends checking in _alpm_checkdeps
Nagy Gabor <ngaba@petra.hos.u-szeged.hu>
* Slight revisions to pmrule.py to allow for a PKG_PROVIDES test.
* Very quick updates to the pactest README.
* Added rules to some of the newer upgrade tests. Note: upgrade055 now fails
due to requiredby entries not being written packages that are dependencies
in a provides role.
* Added these three possible options (or !options, more likely), to the
PKGBUILD possibilities:
- ccache
- distcc
- makeflags
* Removed the --noccache and -j flags from makepkg as their functionality is
better used by adding the above options to a PKGBUILD- keep the functionality
where it is needed.
Testing would be appreciated, I didn't do much of that yet.
* Updated all of the language files, as the POT file was updated. NOTE FOR
TRANSLATORS, try to base your next contribution off of these, notice how
some msgids and messages have been wrapped to the next line- it makes it
easier to read anyway.
* More Makefile.am/configure.ac updates. 'make dist' and 'make distclean' now
work properly, with only one caveat- the automatic testing in distclean
doesn't do so hot as it is compiled with a default configure, which includes
the fakeroot-proof code (which does not cooperate with pactest).
* Added a Makefile.am for the pactest directory.
