This defines a level of interest a user has in a repository. These are
described by the bitmask flags in the alpm_db_usage_t enum:
ALPM_DB_USAGE_SEARCH: repo is valid for searching
ALPM_DB_USAGE_INSTALL: repo is valid for installs (e.g. -S pkg)
ALPM_DB_USAGE_UPGRADE: repo is valid for sysupgrades
ALPM_DB_USAGE_ALL: all of the above are valid
Explicitly listing the contents of a repo will always be valid, and the
repo will always be refreshed appropriately on sync operations.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
If a sync DB is malformed and contains entries in the root of the
archive, load_pkg_for_entry will leave the 'filename' variable empty,
leading to a crash in the ensuing strcmp() calls which determine the DB
fragment being examined.
While this isn't a read error, this should be reported to the user so
that it can be addressed by the creator of the DB.
As seen: https://bbs.archlinux.org/viewtopic.php?pid=1297766
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
On operating systems we support, the behavior is always such that the
kernel will do the right thing as far as invalidating the file
descriptor, regardless of the eventual return value. Therefore,
potentially looping and calling close multiple times is wrong.
At best, we call close again on an invalid FD and throw a spurious EBADF
error. At worst, we might close an FD which doesn't belong to us when a
multi-threaded application opens its own file descriptor between
iterations of the loop.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently we make no effort to validate the %FILENAME% field in the
repo db. This allows for relative paths to be considered valid.
A carefully crafted db entry with a malicious relative path,
(e.g. `../../../../etc/passwd`) will cause pacman to to
overwrite _any_ file on the target's machine.
Add the following validation:
- doesn't start with '.'
- doesn't contain a '/'
- won't overflow PATH_MAX
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
We record whether the default SigLevel is set in order to add upon
it for the *FileSigLevel entries. When using the only valid value
of "SigLevel = Never" with non-gpgme builds, we need to ignore
the ALPM_SIG_PACKAGE_SET flag when determining if we have a valid
value for the database SigLevel.
Signed-off-by: Allan McRae <allan@archlinux.org>
I suspect that eventually we're going to end up returning a pointer to
an allocated struct to describe the download result, but that's for
another patch when the need arises...
Fixes FS#33508.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
When a configured repo database is not already downloaded, a warning
message such as "warning: database file for 'testing' does not exist"
is printed. Disable this warning when the database is scheduled to
be downloaded in the transaction.
Signed-off-by: Allan McRae <allan@archlinux.org>
Similar to the case for makedepends, it is useful to be able to
access this information without parsing a PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
If known, callers can pass the line size to this function in order to
avoid an strlen call. Otherwise, they simply pass 0 and
_alpm_strip_newline will do the call instead.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is useful for tools that automatically rebuild packages and
thus require to generate a build order. These entries are skipped
by pacman.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Unify the output for local and sync packages by only printing a
list of possible validation types for sync packages. This also
has the advantage of not printing the very long sha256 checksum
which line wrapped on a standard width terminal.
Signed-off-by: Allan McRae <allan@archlinux.org>
No new behaviour introduced, everything should work exactly as before.
Dan: refactored to use the single alpm_depend_t structure.
Signed-off-by: Benedikt Morbach <benedikt.morbach@googlemail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add 2012 to the copyright range for all libalpm and pacman source files.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
pacman -U <pkg> returns a bogus "could not find or read package" if the
file is on a fuse file system that doesn't allow root access. Debug
output isn't very helpful here either so we should log why the access
check failed.
The other 2 checks already log something when failing so logging a more
specific error won't hurt either.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
"invalid" in this case simply means files that may or may not be
archives. Discovered via a `pacman -Sc` operation with delta files in
the package cache directory, but can be triggered if any file is passed
to `pacman -Ql` that isn't an archive, for instance, or if the sync
database file is not an archive.
Fix it up so we are more careful about calling archive_read_finish()
only on archives that are valid and have not already been closed, and
teach our archive open function to set the returned archive to NULL if
we aren't going to be returning something valid anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch changes a variety of small things related to our pkghash
implementation with an eye toward performance, especially on native
32-bit systems.
* Use `unsigned int` rather than `size_t` for hash sizes. We already
return ERANGE for any attempted creation of a hash greater than 1
million elements, so unsigned int is more than large enough for our
purposes. Switching to this type allows 32 bit systems to do native
math without helper functions from libgcc.
* _alpm_pkghash_create() now internally adds extra padding for
additional array elements, rather than that being the responsibility of
the caller.
* #define values are moved into static const values in pkghash.c; a new
`stride` value is also extracted (but remains set at 1).
* Division and modulus operators are removed from the normal find and
add paths if possible. We store the upper limit of the number of
elements in the hash so we no longer need to calculate this every
element addition. When doing wraparound position calculations, we only
apply the modulus operator if the value is greater than the number of
buckets.
Signed-off-by: Dan McGee <dan@archlinux.org>
This reduces the number of regcomp() calls when parsing delta entries in
the database from once per entry to once for the entire context handle
by storing the compiled regex data on the handle itself. Just as we do
with the cURL handle, we initialize it the first time it is needed and
free it when releasing the handle.
A few other small tweaks to the parsing function also take place,
including using the stack to store the transient and short file size
string while parsing it.
When parsing a sync database with 1378 delta entries, this reduces the
time of a `pacman -Sl deltas` operation by 50% from 0.22s to 0.12s.
Signed-off-by: Dan McGee <dan@archlinux.org>
Ensures that config.h is always ordered correctly (first) in the
includes. Also means that new source files get this for free without
having to remember to add it.
We opt for -imacros over -include as its more portable, and the
added constraint by -imacros doesn't bother us for config.h.
This also touches the HACKING file to remove the explicit mention of
config.h as part of the includes.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This moves the common setup code of about 5 different callers into one
method. Error messages will now be common and shared in all places;
several paths did not have any messages at all before.
In addition, we now pick an ideal block size for the archive read based
off the larger value of our default buffer size or the st.st_blksize
field. For a filesystem such as NFS, this is often much larger than the
default 8192- values such as 32768 and 131072 are common.
Signed-off-by: Dan McGee <dan@archlinux.org>
This gives us a bit more control and over the archive reading process,
and a bit less is done behind the scenes. It also allows us to use
fstat() in preference to stat(), which should avoid some potential race
conditions.
Some reorganization is necessary to move the stat calls after the open()
calls. Error handling and cleanup in general is also improved, as we had
several potential memory and file handle leaks before in some error
paths.
Signed-off-by: Dan McGee <dan@archlinux.org>
This takes the place of three previously used constants:
ARCHIVE_DEFAULT_BYTES_PER_BLOCK, BUFFER_SIZE, and CPBUFSIZE.
In libarchive 3.0, the first constant will be no more, so we can ensure
we are forward-compatible by removing our usage of it now. The rest are
unified for consistency.
By default, we will use the value of BUFSIZ provided by <stdio.h>, which
is 8192 on Linux. If that is undefined, a default value is provided.
Signed-off-by: Dan McGee <dan@archlinux.org>
This was done to squash a memory leak in the sync database download
code. When we downloaded a database and then reused the payload struct,
we could find ourselves calling get_fullpath() for the signatures and
overwriting non-freed values we had left over from the database
download.
Refactor the payload_free function into a payload_reset function that we
can call that does NOT free the payload itself, so we can reuse payload
structs. This also allows us to move the payload to the stack in some
call paths, relieving us of the need to alloc space.
Signed-off-by: Dan McGee <dan@archlinux.org>
We returned the right error code but never set the flags accordingly.
Also, now that we can bail early, ensure we set the error code.
Signed-off-by: Dan McGee <dan@archlinux.org>
In reality, there is no retrying that happens as of now because we don't
have any import or changing of the keyring going on, but the code is set
up so we can drop this in our new _alpm_process_siglist() function. Wire
up the basics to the sync database validation code, so we see something
like the following:
$ pacman -Ss unknowntrust
error: core: signature from "Dan McGee <dpmcgee@gmail.com>" is unknown trust
error: core: signature from "Dan McGee <dpmcgee@gmail.com>" is unknown trust
error: database 'core' is not valid (invalid or corrupted database (PGP signature))
$ pacman -Ss missingsig
error: core: missing required signature
error: core: missing required signature
error: database 'core' is not valid (invalid or corrupted database (PGP signature))
Yes, there is some double output, but this should be fixable in the
future.
Signed-off-by: Dan McGee <dan@archlinux.org>
We currently have csize, isize, and size concepts, and sometimes the
difference isn't clear. Ensure the following holds:
* size (aka csize): always the compressed size of the package; available
for everything except local packages (where it will return 0)
* isize: always the installed size of the package; available for all
three package types
Signed-off-by: Dan McGee <dan@archlinux.org>
We were using atol(), which on 32 bit, cannot handle values greater than
2GiB, which is fail.
Switch to a strtoull() wrapper function tailored toward parsing off_t
values. This allows parsing of very large positive integer values. off_t
is a signed type, but in our usages, we never parse or have a need for
negative values, so the function will return -1 on error.
Before:
$ pacman -Si flightgear-data | grep Size
Download Size : 2097152.00 K
Installed Size : 2097152.00 K
After:
$ ./src/pacman/pacman -Si flightgear-data | grep Size
Download Size : 2312592.52 KiB
Installed Size : 5402896.00 KiB
Signed-off-by: Dan McGee <dan@archlinux.org>
Hard to believe there was still more room to improve on this, but I
found an easily correctable oversight tonight. Our databases (both sync
and local) contain many blank lines, and we were not moving onto the
next line right away in these cases; instead we would proceed through
our strcmp() conditional checks as normal.
Some local numbers follow to show the effects of this patch:
Sync `-Ss foobarbaz`:
71,709 blank lines skipped early
~1,505,889 strcmp() calls avoided (21 per line)
~15% speed improvement (.210 --> .179 sec)
Local `-Qs foobarbaz`:
6,823 blank lines skipped early
115,991 strcmp() calls avoided (17 per line)
~6% speed improvement (.080 -> .071 sec)
Signed-off-by: Dan McGee <dan@archlinux.org>
Free "syncpath" and restore umask if we fail to grab a lock.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This one wasn't all that necessary as we only used it in one place in
the function, which can be checked easily enough at the call site.
Signed-off-by: Dan McGee <dan@archlinux.org>
Let callers of _alpm_download state whether we should delete on fail,
rather than inferring it from context. We still override this decision
and always unlink when a temp file is used.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
* Move is_local standalone field to status enum
* Create VALID/INVALID flag pair
* Create EXISTS/MISSING flag pair
With these additional fields, we can be more intelligent with database
loading and messages to the user. We now only warn once if a sync
database does not exist and do not continue to try to load it once we
have marked it as missing.
The reason for the flags existing in pairs is so the unknown case can be
represented. There should never be a time when both flags in the same
group are true, but if they are both false, it represents the unknown
case. Care is taken to always manipulate both flags at the same time.
Signed-off-by: Dan McGee <dan@archlinux.org>
The precedence goes as follows: signature > sha256sum > md5sum
Add some logic and helper methods to check what we have available when
loading a package, and then only check what is necessary to verify the
package. This should speed up sync database verifies as we no longer
will be doing both a checksum and a signature validation.
Signed-off-by: Dan McGee <dan@archlinux.org>
We did this with depends way back in commit c244cfecf6 in 2007. We
can do it with these fields as well.
Of note is the inclusion of provides even though only '=' is supported-
we'll parse other things, but no guarantees are given as to behavior,
which is more or less similar to before since we only looked for the
equals sign.
Also of note is the non-inclusion of optdepends; this will likely be
resolved down the road.
The biggest benefactors of this change will be the resolving code that
formerly had to parse and reparse several of these fields; it only
happens once now at load time. This does lead to the disadvantage that
we will now always be parsing this information up front even if we never
need it in the split form, but as these are uncommon fields and our
parser is quite efficient it shouldn't be a big concern.
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds a field in the package struct for this checksum type as well
as allowing access via the API to it. The frontend is now able to
display any read value. Note that this does not implement any use or
verification of the value internally.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't write with extra or unknown whitespace, so there is little
reason for us to trim it when reading either. This also fixes the
hopefully never encountered "paths that start or end with spaces" issue,
for which two pactests have been added. The tests also contain other
evil characters that we have encountered before and handle just fine,
but it doesn't hurt to ensure we don't break such support in the future.
Signed-off-by: Dan McGee <dan@archlinux.org>
As noted by Allan, we failed pretty hard if gpgme was compiled out. With
these changes, only sign001.py fails. This can/will be fixed later once
we beef up the test suite with more signing tests anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
Restore some sanity to the number of arguments passed to _alpm_download
and curl_download_internal.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
