This introduces support for architecture-specific conflicts, depends,
optdepends, makedepends, replaces, and conflicts by appending "_$CARCH"
to the array name. For example, in the global section:
arch=('i686' 'x86_64')
depends=('foo')
depends_x86_64=('bar')
This will generate depends of 'foo' and 'bar' on x86_64, but only 'foo'
on i686. Moreover, this is supported in the package functions with the
same heuristics as the generic names, e.g.
...
arch=('i686' 'x86_64')
depends=('foo')
...
package_somepkg() {
depends_x86_64=('bar')
...
}
Again, will cause x86_64 to have depends of 'foo' and 'bar', but only
'foo' for i686.
Dependencies are now handled with --nobuild unless specificially skipped.
Using --verifysource will skip dependency checks unless --syncdeps is
specified.
Fixes FS#35057 and FS#36999.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add an array VCSCLIENTS to makepkg.conf that matches vcs source protocols
to the package containing the software needed for handling the source.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add support for following the XDG Base Directory Specification when
reading the user-specific configuration file.
If no $XDG_CONFIG_HOME/pacman/makepkg.conf file exists we fall back to
sourcing $HOME/.makepkg.conf
Signed-off-by: Johannes Löthberg <johannes@kyriasis.com>
[Allan] Note XDG_CONFIG_HOME takes priority.
Signed-off-by: Allan McRae <allan@archlinux.org>
We expect all source file to lie in $startdir. However, using
"makepkg -p <buildscript>" can currently allows people to specify buildscripts
in other directories. This results in confusion about where other sources
should lie (in startdir or in the directory that the buildscript is in).
Explicitly disable using -p for files in other directories to avoid this issue.
Fixes FS#40293.
Signed-off-by: Allan McRae <allan@archlinux.org>
If validpgpkeys is set in the PKGBUILD, signature checking fails if
the fingerprint of the key used to create the signature is not listed
in the array.
The key's trust value is ignored.
Signed-off-by: Allan McRae <allan@archlinux.org>
Packaging outside of fakeroot can result in incorrect permissions for
package files. It has been years since fakeroot issues during packaging
were common, so it is safe to enforce fakeroot usage. If using fakeroot
is impossible for some reason, a two line wrapper script will suffice to
fool makepkg.
Signed-off-by: Allan McRae <allan@archlinux.org>
The days of fakeroot being error ridden are long gone, so there is no
valid reason to run makepkg as root.
Signed-off-by: Allan McRae <allan@archlinux.org>
1. Packagers who want to test the package() function, i.e. to check the content
of the pkg/ folder.
2. Developers who want to check how the packaged version of a program looks, in
other words how the pkg/ folder looks.
3. For users of systems with no port tree, makepkg can ease package creation.
However the resulting archive of the whole makepkg process is often useless.
For all situations, makepkg will usually be called several times. But no archive
(the final package) is needed in any cases. The archive creation ends up being a
waste of time and resource, especially for big applications and slow machines.
Since this option aborts the process prematurely, it behaves like the
-o,--nobuild option, i.e. any other option acting on later stages in the process
will be automatically discarded. For --noarchive, it means that in
$ makepkg --noarchive --install
the '--install' option does not do anything.
Signed-off-by: Pierre Neidhardt <ambrevar@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Another small patch that I made long ago (but was too lazy to submit
back then).
When using XferCommand, TotalDownload option is not take into account.
Regards, Matthias
>From bff946cd9969b6bc6243875e0759f0ee02e487de Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Matthias=20Kr=C3=BCger?= <matthias.krueger@famsik.de>
Date: Thu, 9 May 2013 13:21:04 +0200
Subject: [PATCH] doc: pacman.conf: note that TotalDownload and XferCommand
options are incompatible.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Matthias Krüger <matthias.krueger@famsik.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
The change log prototype should be distribution determined.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
Forcing vim users to view files with a tabstop of 2 seems really
unnecessary when noet is set. I find it much easier to read code with
ts=4 and I dislike having to override the modeline by hand.
Command run:
find . -type f -exec sed -i '/vim.* noet/s# ts=2 sw=2##' {} +
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
Allowing multiple databases with the same name causes conflicts as they
both point to the same database file but may use different servers,
usages, or siglevels.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
It is fairly common that packages contain static libraries with no
shared counterpart. These should not be removed with !staticlibs.
Signed-off-by: Allan McRae <allan@archlinux.org>
--print-format is totally useless without --print. Implying --print
will also save us the hassle of checking it when we add transaction
option validation.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a "Usage" key to the repo section of the config which allows for the
tokens "Search", "Install", "Upgrade", "All", which correspond to values
in the alpm_db_usage_t enum. Users can specify "Usage" multiple times
for a given repo, or multiple flags per "Usage" line and they will be
OR'd together. If unspecified, the default is full usage of the repo.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Looks like I fat fingered something when I refactored the original
submissions. Woops.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This allows for VAR=value and VAR+=value variable declarations.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
It is now possible to invert patterns in NoExtract and NoUpgrade.
This feature allows users to whitelist certain files that were
previously blacklisted by another entry.
Signed-off-by: Allan McRae <allan@archlinux.org>
Specify it twice to only filter direct dependencies.
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
When maintaining a custom repo, often it is undesirable to retain older
versions of packages. This patch adds the --remove option to remove the
current package file and it's signature from disk before adding the new
one to the database. Documentation is also updated. This is an optional
flag and default behaviour (leaving ondisk files alone) is not changed.
Signed-off-by: Phillip Smith <fukawi2@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Adding this restriction means we can filter any FILENAME entry from
starting with a "/" or a ".". Use the term "dot" as it is more
computing relevant compared to "full stop" or "period" which vary
depending on English locale.
Signed-off-by: Allan McRae <allan@archlinux.org>
Resolve several grammatical errors and minor formatting consistency issues
in pacman(8). Generalize the "FTP servers" and package file extension
information.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
Resolve several grammatical errors and minor formatting consistency issues
in PKGBUILD(5).
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
This allows for somewhat easy templating for PKGBUILDs.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
Update doc/PKGBUILD-example.txt with several changes from the official
Arch Linux package for patch-2.7.1-1, including other changes shown below:
-- replaces spaces with tabs in functions
-- replaces 'make prefix=' with 'make DESTDIR='
-- improves quoting of the "cd" command in functions
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
Add support for overriding configuration in /etc/makepkg.conf and
~/.makepkg.conf by setting the environment variable CARCH similar to
how SRCDEST and PKGDEST behave.
Fixes FS#35030.
Signed-off-by: Allan McRae <allan@archlinux.org>
This new option disables the prepare function. Useful in combination
with -o to get an unpatched copy of the sources for testing purpose.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The Arch web site now redirects to https links for all subdomains, so it
makes sense to use these links in the docs for pacman. Links were
changed to use https for a couple other sites that support it as well,
such as gnu.org and kernel.org.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
Because --noextract also implies to not download/verify source files, it wasn't
possible to simply do that, without either extracting and/or building.
(Note: --verifysource takes precedence over --noextract)
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Use --nocolor to suppress colored output from pacman-key, otherwise
output will be in color.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Pacman currently bails when trying to extract a file over a directory
when using --force. Instead of ignoring all conflict, perform the
check and skip any file-file conflicts. Conflicts between directories
and files are still flagged and cause the transation to abort.
As a bonus, we now know about files changing packages when using
--force, so we can skip removing them fixing upgrade046.
Signed-off-by: Allan McRae <allan@archlinux.org>
Supported by libarchive as of version 3.1.0 when compiled against lzo2
or in the presence of the lzop binary.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Rearrange the functions section of the PKGBUILD man package. Clarify
that the package() function is a requirement and the rest are all
optional. Note that $pkgdir should only be used in the package()
function.
Signed-off-by: Allan McRae <allan@archlinux.org>
Packages are already in the pkg db were given a warning, and then
readded anyway. With -n specified, the warning is printed, but skips
readding it.
Signed-off-by: Danny George <dangets@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Places logs in a pre-defined location. The logs are always neatly
labeled with package names and numbers, and this way can be more easily
sent to network shares as they are written or compressed/cleaned en
masse.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a "debug" option that appends the compiler flags specified in the
variables DEBUG_CFLAGS and DEBUG_CXXFLAGS in makepkg.conf to their
counterpart buildflags.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a compile time check for langinfo.h so that we can possibly use
unicode line drawing characters if the current locale is supportive of
them. This can be explicitly disabled at runtime with the use of a new
switch: -a, --ascii.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Simply add the option to pass the --needed flag to pacman when using -i
with makepkg. When using makepkg in scripts, particularly for git
packages with the new version functions and not just a date, this can
save disk io and time instead of reinstalling.
This would mostly be useful with the --noconfirm option.
Signed-off-by: wgiokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Using the last match in the BUILDENV and OPTIONS arrays allows the
user to easily override these values without specifying the entire
array. For example add "BUILDENV+=(sign)" in ~/.makepkg.conf.
Fixes FS#26701.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add details of the system wide and user specific versions of
makepkg.conf to the man page.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The current VCS packaging support is really, really, really bad.
It is best to strip it out completely before rewriting it.
Signed-off-by: Allan McRae <allan@archlinux.org>
add the asdeps flag for makepkg so that it does pacman -U --asdeps
[Allan: clean-up whitespace]
Signed-off-by: Daniel Wallace <daniel.wallace12@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
