This is the first step at separating the pacman message catalog and the
scripts message catalog. Makefiles, configure.ac, and other such files
are adjusted accordingly, as well as renaming files. The TEXTDOMAIN of
scripts is also adjusted.
Note that no actual pot or po files get changed here; these will get
pruned in a future commit so each catalog contains only the necessary
messages.
Signed-off-by: Dan McGee <dan@archlinux.org>
This makes it possible to omit usage of -lgpgme, just as we can do for
-lcurl and -lcrypto.
Thanks to Rémy Oudompheng for an initial stab at this.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a bit of a stopgap solution for the problem, but an easier one than
revamping the file conflict checking code to support the same stuff. Using
some more gross autoconf magic, figure out which struct field we need to
look at to determine read-only status and store that on our mountpoint
struct. If we find out we needed this partition after calculating size
requirements, then toss an error.
Signed-off-by: Dan McGee <dan@archlinux.org>
All of these can be done with integer division; the only slightly
interesting part is ensuring we round up like before with calling the
ceil() function.
We can also remove the math library from requirements; now that the only
ceil() calls are gone, we don't need this anymore.
Signed-off-by: Dan McGee <dan@archlinux.org>
We use PATH_MAX everywhere by including limits.h so there is no
point in doing a check for it in a different header when dealing
with FreeBSD's libfetch.
Also, remove autoconf check for strings.h header as it is not used
anywhere.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
POSIX does not require PATH_MAX be defined when there is not actual
limit to its value. This affects HURD based systems. Work around
this by defining PATH_MAX to 4096 (as on Linux) when this is not
defined.
Also, clean up inclusions of limits.h and remove autoconf check for
this header as we do not use macro shields for its inclusion anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Turn it into a configure-type typedef, which allows us to reduce the
amount of duplicated code and clean up some #ifdef magic in the code
itself. Adjust some of the other defined checks to look at the headers
available rather than trying to pull in the right ones based on
configure checks.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Two helper function are added to calculate the disk usage from packages
that are either currently installed on the system or from a package
archive.
Some minor approximations have been made:
1. Size for directories is not considered when removing a package from the
filesystem to avoid multiple counting across packages. Also, these are
reported to take zero size while installing.
2. Symlinks are reported to contribute zero size towards removal as
libarchive reports them to have zero size for install.
3. Package data files (.PKGINFO, .INSTALL, .CHANGELOG) are counted towards
usage on dbpath on install, but their size is not counted on package
removal.
4. No handling of extra size needed for .pacsave/.pacnew files.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a mount_point_list() function that attempts to portably obtain
a list of system mount points and a struct to hold needed mount point
information.
Abort the transaction if we are unable to determine the mount points.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This macro is deemed unnecessary by even the autoconf guys, so we really
don't need to use it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We were including the header in a lot of places it is no longer used.
Additionally, use the correct autoconf macro for determining whether
d_type is available as a member: HAVE_STRUCT_DIRENT_D_TYPE.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
BASH is defined when you are actually using bash during configure, which
sucks because it ends up being '/bin/sh', messing up all of our scripts.
Change the name of the variable we use in configure, and also ensure we get
a full path to the executable by using AC_PATH_PROGS rather than
AC_CHECK_PROGS. Finally, change the variable name everywhere we use it.
Signed-off-by: Dan McGee <dan@archlinux.org>
This applies to contrib/ files, our scripts, and the documentation.
Dan: fix 'make clean' in contrib/ directory.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
We did this check unconditionally, rather than only doing it if we were
actually going to build and run with libfetch. This is safe because we would
have already bailed if libfetch was explicitly requested but not found.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add python-2.7 to the list of checked versions of python and add a
check for a python2 binary before resorting to the unversioned
python binary.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Adds a check for the minimum mainline GCC version for FORTIFY_SOURCE
support and enables -D_FORTIFY_SOURCE=2 by default when building with
--enable-debug.
Signed-off-by: Allan McRae <allan@archlinux.org>
Unfortunately this patch is hard to split up into smaller chunks. Our build
system and the associated automake/autoconf/libtool macros has been left
untouched for a while, and could use a refresher.
* Upgrade ltmain.sh to the latest version
* Move away from a huge acinclude.m4 directory to using individual files in
the m4/ subdirectory, suggested by upstream automake documentation
* Update all macros to their latest available version
* Adjust Makefile.am and autogen.sh to accommodate m4/ subdirectory
Signed-off-by: Dan McGee <dan@archlinux.org>
I don't know what I tested in commit 3e7b90ff69, but it definitely wasn't
working as advertised. Fix the checks in the source code itself to match the
right define (HAVE_LIBFETCH), as well as make sure the configure check
defaults to looking for the library but not bailing if it could not be
found.
Signed-off-by: Dan McGee <dan@archlinux.org>
Model it after the new OpenSSL check, and have it be a bit more useful. If
you do not explicitly pass a command line option, it will be linked if
available but will not error out if it is missing. Also bump the version to
that where connection caching was introduced as we use these new features in
the codebase.
Signed-off-by: Dan McGee <dan@archlinux.org>
I've noticed my Atom-powered laptop is dog-slow when doing integrity checks
on packages, and it turns out our MD5 implementation isn't near as good as
that provided by OpenSSL. Using their routines instead provided anywhere
from a 1.4x up to a 1.8x performance benefit over our built-in MD5 function.
This does not remove the MD5 code from our codebase, but it does enable
linking against OpenSSL to get their much faster implementation if it is
available on whatever platform you are using. At configure-time, we will
default to using it if it is available, but this can be easily changed by
using the `--with-openssl` or `--without-openssl` arguments to configure.
Signed-off-by: Dan McGee <dan@archlinux.org>
With commit 5dffef78, the repo database always has a symlink
of the form reponame.db. Use that filename and let libarchive
determine the compression type.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Attempt to find "du" from coreutils in the standard paths and if
not revert to the version in the users PATH. Using the full path
prevents issues such as FS#19932, where a different and incompatible
version of du is put earlier in the users path.
Signed-off-by: Allan McRae <allan@archlinux.org>
This is a partial revert of commit d44e5099. By making disabling docs the
default, it presents all sorts of problems- namely anyone who builds from a
tarball and isn't careful enough to include '--enable-doc' will get an
install without any manpages at all. Remember that make includes both
'build' and 'install' steps.
The warning introduced by the commit is kept, so we do not lose all its
benefits, but I am not happy to see regressions introduced in packaging and
installing of this piece of software.
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the test suite to test/pacman in order to make a logical
location for a future makepkg test suite.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Dan McGee