Remove versioncmp.c by moving all functions to locations that make sense.
Move replacement functions (for building without glibc) into util.c where
they belong, and do proper checks for them instead of using __sun__, etc.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove unused buildtype field from pmpkg_t struct and anything associated
with it, as it is unused at the moment. If we need to readd it, it is an
easy revert of this commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
The three chk_ functions overlap for packages both in targets and in the
database. This caused the same conflict to be found in both direction
(A conflicts with B, and B conflicts with A).
This patch avoids this duplication. which shouldn't be needed, but other
changes might be required for that to work correctly.
This also has the unexpected side effect to hide the failure of sync022
pactest, for FS #7415. That's maybe not a good thing though..
Note from Dan: sync022 does succeed, but a sync023 pactest added to check
regressions also seems to pass. This may be a valid fix to this 'problem'
sync022 was meant to find.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Because of this commit:
ea1fef69ad
we lost a lot of gettext-ized messages on the libalpm side. Remove them
in order to clean out these files a bit.
Signed-off-by: Dan McGee <dan@archlinux.org>
There is no real reason to burden our translators with these messages, as
anyone helping to debug these will probably want them in English.
Signed-off-by: Dan McGee <dan@archlinux.org>
We shouldn't translate log messages to pacman.log so it is consistant and
can be parsed by other tools. Remove all gettext _() around these strings.
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the translations from src/pacman/po to just po/ so we can include the
scripts gettext translations in the same message catalog as that of the
pacman frontend. The libalpm message catalog, for now, will remain a separate
existence.
Signed-off-by: Dan McGee <dan@archlinux.org>
I ran flawfinder and sparse over the pacman source code and found a few
things that were worth fixing (and were quick fixes).
Signed-off-by: Dan McGee <dan@archlinux.org>
Adds the ARCHIVE_EXTRACT_NO_OVERWRITE libarchive flags
for extracting files and directories.
This will prevent symlinks for being overwritten by directories.
All other files that need to be extracted should already have
been deleted previously by pacman.
This flag is not used for extracting files in backup array
to /tmp/alpm_XXXX, because this file is created by mkstemp first,
and so needs to be overwritten by the file from the archive.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
With libarchive 2.2.3 (previously 1.3.1), archive_read_extract now returns ARCHIVE_WARN
when a package is extracted as user, because for example, UID=0 or SUID bit can't be set.
This patch makes pacman not treating these warnings as errors anymore,
but simply ignoring them.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
I previously introduced some patches to make just about every path in
pacman/libalpm configurable; doing this with the lockfile seemed a bit too
far and we really should just place the lockfile where it belongs- with the
DB that needs locking.
More details in this thread:
http://archlinux.org/pipermail/pacman-dev/2007-June/008499.html
Signed-off-by: Dan McGee <dan@archlinux.org>
The scriptlet calling had some unneeded complexity for the time being
which we aren't using here. Let's get rid of it until we find a good way
to implement it correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
First reported here:
http://bbs.archlinux.org/viewtopic.php?pid=261861
Newly created files were done with the standard umask, so those that are
extracted seperately and copied to a .pacnew extension will have the wrong
permissions. This should hopefully fix this.
Signed-off-by: Dan McGee <dan@archlinux.org>
The alpm_splitdep function formerly overwrote the input string, causing
a few issues. Fix this.
Signed-off-by: Nagy Gabor <ngaba@petra.hos.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
For future possibilities, don't extract any files that start with '.'.
This will allow us to add features such as the ChangeLog viewing without
having to wait to include these files in packages, because older versions
of pacman will be forward compatable with 'hidden' files at the root level
of the package.
Signed-off-by: Dan McGee <dan@archlinux.org>
This was a bad way to fix a problem upstream. Doing this resulted in
symlink permissions being applied to files installed on the system, leaving
some binaries with 77 permission, etc.
This reverts commit 4e6b7c1cde.
This function is an absolute disaster, so we'll take it one step at a time
here. This was a quick once-over of the whole thing, trying to straighten
out some of the spaghetti code and fix some mistakes that others found.
We are now down to two failing pactests again: sync300 and upgrade051.
Signed-off-by: Dan McGee <dan@archlinux.org>
This should hopefully allow multiple cache dirs to be specified in
pacman.conf and/or on the command line, and allow pacman to test
each one for the package file. The first one found to be writeable is
used as the download cache.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Readd default logmask of ERROR and WARNING
* Remove DOWNLOAD log level as it no longer applies
* Add 'no targets' logic back in where it applies
* Switch some prints in parseconfig to ERROR
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove the logmask functionality from the backend as it has been moved to
the frontend, and change the logging callback function to use pm_printf.
In addition, make much better use of va_list- use the args list instead
of a arbitrarily chosen string to print to in the logging functions.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add some 'const' keywords all over the code to make it a bit more strict on
what you can and can't do with data. This is especially important when we
return pointers to the pacman frontend- ideally this would always be
untouchable data.
Signed-off-by: Dan McGee <dan@archlinux.org>
'inline' keyword in C99 is not correctly recognized, so compilation fails on
the warning it spits. This fixes this.
Signed-off-by: Dan McGee <dan@archlinux.org>
The db variable was left unset when calling alpm_db_register, leading
to a failure to ever register a sync db. Also added a check to ensure
DBPath was set when trying to register a database.
Signed-off-by: Dan McGee <dan@archlinux.org>
Switch over to the new frontend parseconfig.
* Fix a few issues in parseconfig
* Remove unused callback upon database registration
* Remove conf file related errors from error.c/alpm.h
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm.h is the only "publically viewable" file, so there is no reason to have
functions in alpm.c that belong in package.c, db.c, etc. Move the functions
where they belong and leave only the library init functions in alpm.c.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Add vim modeline to Makefile.am and configure.ac
* Fix white space in Makefile.am and configure.ac
* Add contrib/wget-xdelta.sh to EXTRA_DIST in Makefile.am
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove any use of the former path variables defined by the Makefiles or
config.h. These are now runtime configurable only with pacman.conf (or by
using flags on the command line).
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the defaults for RootDir, CacheDir, DBPath, and LockFile into
pacman.conf, just as LogFile was done before. Add a section to
alpm_parse_config to look for a LockFile directive.
Signed-off-by: Dan McGee <dan@archlinux.org>
This code depends on /etc/mtab existance, which is not very reliable in all
cases, especially in a chroot or non-Linux environment. Dump it for now
until we can find a better way.
Signed-off-by: Dan McGee <dan@archlinux.org>
Also cleaned up some duplicate printf lines related to the ShowSize option.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This change allows us to use all autoconf specified paths, most notably
$(localstatedir). It is quite a change and touches a lot of files, as
all references to the DB and cache were done with the ROOTDIR as a prefix.
* add --lock command-line option to pacman to specify the location of the
lockfile (this can now be specified at configure time by setting the
$localstatedir path).
* Rip quite a few settings out of configure.ac as they are now picked by
setting the paths during configure or make.
* Fix bug with /tmp fallback for sync downloads not working correctly
(related to root location, now the system tmp dir is used).
* Simplified the parameters to some libalpm functions, and added get/set
for the new lockfile option.
* Renamed several of the DEFS to names without the PM_ prefix.
Signed-off-by: Dan McGee <dan@archlinux.org>
Small change (addition of a 'strreplace' function) which replaces
any $repo tokens found in a server line with the name of the repo
or section being processed.
While this is more simplistic than suggestions on flyspray, it works
and I think it is cleaner. Merits can be discussed further.
Ref: FS#6389
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Reorder package version checking so there is no output when a
package is listed in IgnorePkg.
Closes FS#7111
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Fix for FS#7133 - when DB scanning finds an invalid named entry,
scanning is currently aborted. Instead we will simply skip it
and find the next valid package.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Simple clean up for the rest of the code, which also prevents a little
libdownload bug relating to '//' appearing in URLs.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Hackish fix to ensure libarchive extracts files and dirs with the right
permissions. For some reason extracting /tmp on install wasn't handled properly
by librachive, so an explicit chmod will fix this.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
The old function did too much on its own; let alpm_depcmp do the hard
work. This will allow for future versioned provisions if necessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
We had many unnecessary casts, most of them dealing with malloc and
other memory allocations. The variable type should take care of it;
no need to do it explicitly. In addition, I caught a const error while
removing the casts.
Signed-off-by: Dan McGee <dan@archlinux.org>
Allow IgnorePkg (or --ignore) to work for _either_ side of a
replacement. For example, if 'foo' is set to replace 'bar',
ignoring either package will skip this replacement.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
* Remove some unnecessary conditional compiling in util.h- move the
functions tha required it to trans.c (along with a bunch of new header
includes).
* Clean up util.h a bit- remove some header includes, remove universal
libarchive include and only put it in the files that need it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove inclusion of libintl.h from all files, because we can do it once
in util.c where the _() macro is defined.
Signed-off-by: Dan McGee <dan@archlinux.org>
Somehow missed this earlier when changing everything to types.
unsigned short -> pmloglevel_t wherever necessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
Unification and cleanup of the add.c and remove.c code. It looks remarkably
similar, so this may be a candidate for functionalization at a later time.
Signed-off-by: Dan McGee <dan@archlinux.org>
In order to get more reliable message statistics, I updated all of the
po files by first doing a make *.pot-update followed by a make. I am
holding off on committing the pot files as this causes issues with make
constantly wanting to rebuild them.
Signed-off-by: Dan McGee <dan@archlinux.org>
Several important paths, file locations, and extensions were #define-d in the
source code instead of being configurable. This moves all of these to
the configure script where they can be picked upon running ./configure. We
may later want to make some of these even more visible and move them to
pacman.conf.
Signed-off-by: Dan McGee <dan@archlinux.org>
We haven't done a whole lot with Doxygen so far, so this updates some of the
things that have changed a lot- namely, the now public exposure of alpm_list.
All functions in this file have now been Doxygen commented, and a few other
things in alpm.c were fixed as well. In addition, the Doxygen config file
was updated.
Signed-off-by: Dan McGee <dan@archlinux.org>
* --ignore was being ignored (haha) on sysupgrade when a package was listed
as being a force upgrade. This adds a prompt to the user in this case asking
what to do.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Move all .cvsignore files to .gitignore for switch in VCS. In addition,
delete ones that were unnecessary because they only contained Makefile
and Makefile.am.
Signed-off-by: Dan McGee <dan@archlinux.org>
